| Age | Commit message (Collapse) | Author |
|---|
|
Function in modules could appear in /proc/kallsyms in random order.
ffffffffa02608a0 t bpf_testmod_loop_test
ffffffffa02600c0 t __traceiter_bpf_testmod_test_writable_bare
ffffffffa0263b60 d __tracepoint_bpf_testmod_test_write_bare
ffffffffa02608c0 T bpf_testmod_test_read
ffffffffa0260d08 t __SCT__tp_func_bpf_testmod_test_writable_bare
ffffffffa0263300 d __SCK__tp_func_bpf_testmod_test_read
ffffffffa0260680 T bpf_testmod_test_write
ffffffffa0260860 t bpf_testmod_test_mod_kfunc
Therefore, we cannot reliably use kallsyms_find_next() to find the end of
a function. Replace it with a simple guess (start + 128). This is good
enough for this test.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211022234814.318457-1-songliubraving@fb.com
|
|
Skipping the second half of the test is not enough to silent the warning
in dmesg. Skip the whole test before we can either properly silent the
warning in kernel, or fix LBR snapshot for VM.
Fixes: 025bd7c753aa ("selftests/bpf: Add test for bpf_get_branch_snapshot")
Fixes: aa67fdb46436 ("selftests/bpf: Skip the second half of get_branch_snapshot in vm")
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211026000733.477714-1-songliubraving@fb.com
|
|
This is the same as commit d164dd9a5c08 ("selftests/bpf: Fix
test_core_autosize on big-endian machines"), but for
test_core_reloc_mods.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211026010831.748682-7-iii@linux.ibm.com
|
|
Use the compiler-defined __BYTE_ORDER__ instead of the libc-defined
__BYTE_ORDER for consistency.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211026010831.748682-6-iii@linux.ibm.com
|
|
Use the compiler-defined __BYTE_ORDER__ instead of the libc-defined
__BYTE_ORDER for consistency.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211026010831.748682-4-iii@linux.ibm.com
|
|
Use the compiler-defined __BYTE_ORDER__ instead of the libc-defined
__BYTE_ORDER for consistency.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211026010831.748682-3-iii@linux.ibm.com
|
|
__BYTE_ORDER is supposed to be defined by a libc, and __BYTE_ORDER__ -
by a compiler. bpf_core_read.h checks __BYTE_ORDER == __LITTLE_ENDIAN,
which is true if neither are defined, leading to incorrect behavior on
big-endian hosts if libc headers are not included, which is often the
case.
Fixes: ee26dade0e3b ("libbpf: Add support for relocatable bitfields")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211026010831.748682-2-iii@linux.ibm.com
|
|
queue_full_warning is a pointer, so it is wrong to use sizeof to calculate
the number of characters of the string it points to. The effect is that we
only print out the first few characters of the warning string.
The correct way is to use strlen(). We don't need to add 1 to the strlen()
because we don't want to write the terminating null character to stdout.
Link: https://lkml.kernel.org/r/20211019160701.15587-1-Viktor.Rosendahl@bmw.de
Link: https://lore.kernel.org/r/8fd4bb65ef3da67feac9ce3258cdbe9824752cf1.1629198502.git.jing.yangyang@zte.com.cn
Link: https://lore.kernel.org/r/20211012025424.180781-1-davidcomponentone@gmail.com
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Viktor Rosendahl <Viktor.Rosendahl@bmw.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
The name of the API doesn't convey clearly that this size is in number
of bytes (there needed to be a separate comment to make this clear in
libbpf.h). Further, measuring the size of BPF program in bytes is not
exactly the best fit, because BPF programs always consist of 8-byte
instructions. As such, bpf_program__insn_cnt() is a better alternative
in pretty much any imaginable case.
So schedule bpf_program__size() deprecation starting from v0.7 and it
will be removed in libbpf 1.0.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211025224531.1088894-5-andrii@kernel.org
|
|
Schedule deprecation of a set of APIs that are related to multi-instance
bpf_programs:
- bpf_program__set_prep() ([0]);
- bpf_program__{set,unset}_instance() ([1]);
- bpf_program__nth_fd().
These APIs are obscure, very niche, and don't seem to be used much in
practice. bpf_program__set_prep() is pretty useless for anything but the
simplest BPF programs, as it doesn't allow to adjust BPF program load
attributes, among other things. In short, it already bitrotted and will
bitrot some more if not removed.
With bpf_program__insns() API, which gives access to post-processed BPF
program instructions of any given entry-point BPF program, it's now
possible to do whatever necessary adjustments were possible with
set_prep() API before, but also more. Given any such use case is
automatically an advanced use case, requiring users to stick to
low-level bpf_prog_load() APIs and managing their own prog FDs is
reasonable.
[0] Closes: https://github.com/libbpf/libbpf/issues/299
[1] Closes: https://github.com/libbpf/libbpf/issues/300
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211025224531.1088894-4-andrii@kernel.org
|
|
Add APIs providing read-only access to bpf_program BPF instructions ([0]).
This is useful for diagnostics purposes, but it also allows a cleaner
support for cloning BPF programs after libbpf did all the FD resolution
and CO-RE relocations, subprog instructions appending, etc. Currently,
cloning BPF program is possible only through hijacking a half-broken
bpf_program__set_prep() API, which doesn't really work well for anything
but most primitive programs. For instance, set_prep() API doesn't allow
adjusting BPF program load parameters which are necessary for loading
fentry/fexit BPF programs (the case where BPF program cloning is
a necessity if doing some sort of mass-attachment functionality).
Given bpf_program__set_prep() API is set to be deprecated, having
a cleaner alternative is a must. libbpf internally already keeps track
of linear array of struct bpf_insn, so it's not hard to expose it. The
only gotcha is that libbpf previously freed instructions array during
bpf_object load time, which would make this API much less useful overall,
because in between bpf_object__open() and bpf_object__load() a lot of
changes to instructions are done by libbpf.
So this patch makes libbpf hold onto prog->insns array even after BPF
program loading. I think this is a small price for added functionality
and improved introspection of BPF program code.
See retsnoop PR ([1]) for how it can be used in practice and code
savings compared to relying on bpf_program__set_prep().
[0] Closes: https://github.com/libbpf/libbpf/issues/298
[1] https://github.com/anakryiko/retsnoop/pull/1
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211025224531.1088894-3-andrii@kernel.org
|
|
Fix instruction index validity check which has off-by-one error.
Fixes: 3ee4f5335511 ("libbpf: Split bpf_core_apply_relo() into bpf_program independent helper.")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211025224531.1088894-2-andrii@kernel.org
|
|
In order to show PIDs and names for processes holding references to BPF
programs, maps, links, or BTF objects, bpftool creates hash maps to
store all relevant information. This commit is part of a set that
transitions from the kernel's hash map implementation to the one coming
with libbpf.
The motivation is to make bpftool less dependent of kernel headers, to
ease the path to a potential out-of-tree mirror, like libbpf has.
This is the third and final step of the transition, in which we convert
the hash maps used for storing the information about the processes
holding references to BPF objects (programs, maps, links, BTF), and at
last we drop the inclusion of tools/include/linux/hashtable.h.
Note: Checkpatch complains about the use of __weak declarations, and the
missing empty lines after the bunch of empty function declarations when
compiling without the BPF skeletons (none of these were introduced in
this patch). We want to keep things as they are, and the reports should
be safe to ignore.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211023205154.6710-6-quentin@isovalent.com
|
|
In order to show BPF programs and maps using BTF objects when the latter
are being listed, bpftool creates hash maps to store all relevant items.
This commit is part of a set that transitions from the kernel's hash map
implementation to the one coming with libbpf.
The motivation is to make bpftool less dependent of kernel headers, to
ease the path to a potential out-of-tree mirror, like libbpf has.
This commit focuses on the two hash maps used by bpftool when listing
BTF objects to store references to programs and maps, and convert them
to the libbpf's implementation.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211023205154.6710-5-quentin@isovalent.com
|
|
In order to show pinned paths for BPF programs, maps, or links when
listing them with the "-f" option, bpftool creates hash maps to store
all relevant paths under the bpffs. So far, it would rely on the
kernel implementation (from tools/include/linux/hashtable.h).
We can make bpftool rely on libbpf's implementation instead. The
motivation is to make bpftool less dependent of kernel headers, to ease
the path to a potential out-of-tree mirror, like libbpf has.
This commit is the first step of the conversion: the hash maps for
pinned paths for programs, maps, and links are converted to libbpf's
hashmap.{c,h}. Other hash maps used for the PIDs of process holding
references to BPF objects are left unchanged for now. On the build side,
this requires adding a dependency to a second header internal to libbpf,
and making it a dependency for the bootstrap bpftool version as well.
The rest of the changes are a rather straightforward conversion.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211023205154.6710-4-quentin@isovalent.com
|
|
BPF programs, maps, and links, can all be listed with their pinned paths
by bpftool, when the "-f" option is provided. To do so, bpftool builds
hash maps containing all pinned paths for each kind of objects.
These three hash maps are always initialised in main.c, and exposed
through main.h. There appear to be no particular reason to do so: we can
just as well make them static to the files that need them (prog.c,
map.c, and link.c respectively), and initialise them only when we want
to show objects and the "-f" switch is provided.
This may prevent unnecessary memory allocations if the implementation of
the hash maps was to change in the future.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211023205154.6710-3-quentin@isovalent.com
|
|
The dependency is only useful to make sure that the $(LIBBPF_HDRS_DIR)
directory is created before we try to install locally the required
libbpf internal header. Let's create this directory properly instead.
This is in preparation of making $(LIBBPF_INTERNAL_HDRS) a dependency to
the bootstrap bpftool version, in which case we want no dependency on
$(LIBBPF).
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211023205154.6710-2-quentin@isovalent.com
|
|
Instead of using subtests in bpf_verif_scale selftest, turn each scale
sub-test into its own test. Each subtest is compltely independent and
just reuses a bit of common test running logic, so the conversion is
trivial. For convenience, keep all of BPF verifier scale tests in one
file.
This conversion shaves off a significant amount of time when running
test_progs in parallel mode. E.g., just running scale tests (-t verif_scale):
BEFORE
======
Summary: 24/0 PASSED, 0 SKIPPED, 0 FAILED
real 0m22.894s
user 0m0.012s
sys 0m22.797s
AFTER
=====
Summary: 24/0 PASSED, 0 SKIPPED, 0 FAILED
real 0m12.044s
user 0m0.024s
sys 0m27.869s
Ten second saving right there. test_progs -j is not yet ready to be
turned on by default, unfortunately, and some tests fail almost every
time, but this is a good improvement nevertheless. Ignoring few
failures, here is sequential vs parallel run times when running all
tests now:
SEQUENTIAL
==========
Summary: 206/953 PASSED, 4 SKIPPED, 0 FAILED
real 1m5.625s
user 0m4.211s
sys 0m31.650s
PARALLEL
========
Summary: 204/952 PASSED, 4 SKIPPED, 2 FAILED
real 0m35.550s
user 0m4.998s
sys 0m39.890s
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211022223228.99920-5-andrii@kernel.org
|
|
It seems to cause a lot of harm to kprobe/tracepoint selftests. Yucong
mentioned before that it does manipulate sysfs, which might be the
reason. So let's mark it as serial, though ideally it would be less
intrusive on the system at test.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211022223228.99920-4-andrii@kernel.org
|
|
Revamp how test discovery works for test_progs and allow multiple test
entries per file. Any global void function with no arguments and
serial_test_ or test_ prefix is considered a test.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211022223228.99920-3-andrii@kernel.org
|
|
Ensure that all test entry points are global void functions with no
input arguments. Mark few subtest entry points as static.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211022223228.99920-2-andrii@kernel.org
|
|
kunit.py currently crashes and fails to parse kernel output if it's not
fully valid utf-8.
This can come from memory corruption or just inadvertently printing
out binary data as strings.
E.g. adding this line into a kunit test
pr_info("\x80")
will cause this exception
UnicodeDecodeError: 'utf-8' codec can't decode byte 0x80 in position
1961: invalid start byte
We can tell Python how to handle errors, see
https://docs.python.org/3/library/codecs.html#error-handlers
Unfortunately, it doesn't seem like there's a way to specify this in
just one location, so we need to repeat ourselves quite a bit.
Specify `errors='backslashreplace'` so we instead:
* print out the offending byte as '\x80'
* try and continue parsing the output.
* as long as the TAP lines themselves are valid, we're fine.
Fixed spelling/grammar in commit log:
Shuah Khan <<skhan@linuxfoundation.org>
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Before enabling warnings through HOSTCFLAGS, fix the would-be warnings:
HOSTCC pmu-events/jevents.o
pmu-events/jevents.c:74:22: warning: no previous prototype for ‘convert’ [-Wmissing-prototypes]
74 | enum aggr_mode_class convert(const char *aggr_mode)
| ^~~~~~~
pmu-events/jevents.c: In function ‘print_events_table_entry’:
pmu-events/jevents.c:373:8: warning: declaration of ‘topic’ shadows a global declaration [-Wshadow]
373 | char *topic = pd->topic;
| ^~~~~
pmu-events/jevents.c:316:14: note: shadowed declaration is here
316 | static char *topic;
| ^~~~~
pmu-events/jevents.c: In function ‘json_events’:
pmu-events/jevents.c:554:9: warning: declaration of ‘func’ shadows a global declaration [-Wshadow]
554 | int (*func)(void *data, struct json_event *je),
| ~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
pmu-events/jevents.c:85:15: note: shadowed declaration is here
85 | typedef int (*func)(void *data, struct json_event *je);
| ^~~~
pmu-events/jevents.c: In function ‘main’:
pmu-events/jevents.c:1211:25: warning: initialization discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
1211 | char *err_string_ext = "";
| ^~
pmu-events/jevents.c:1304:17: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
1304 | err_string_ext = " for std arch event";
| ^
Signed-off-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/1634807805-40093-2-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Because _LARGEFILE64_SOURCE is set in perf, file offset sizes can be
64 bits. If a workflow needs to open /proc/kcore on a 32 bit system (for
example to decode Arm ETM kernel trace) then the size value will be
wrapped to 32 bits in the function file_size() at this line:
dso->data.file_size = st.st_size;
Setting the file_size member to be u64 fixes the issue and allows
/proc/kcore to be opened.
Reported-by: Denis Nikitin <denik@chromium.org>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20211021112700.112499-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The following build message:
rm dlfilters/dlfilter-test-api-v0.o
is unwanted.
The object file is being treated as an intermediate file and being
automatically removed. Mark the object file as .SECONDARY to prevent
removal and hence the message.
Requested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20210930062849.110416-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a new option '--cputype' to 'perf list' to display core-only PMU
events or atom-only PMU events.
Each hybrid PMU event has been assigned with a PMU name, this patch
compares the PMU name before listing the result.
For example:
perf list --cputype atom
...
cache:
core_reject_l2q.any
[Counts the number of request that were not accepted into the L2Q because the L2Q is FULL. Unit: cpu_atom]
...
The "Unit: cpu_atom" is displayed in the brief description section
to indicate this is an atom event.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210903025239.22754-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
as part of extended regs
This patch enables presenting Sampled Instruction Address Register
(SIAR) and Sampled Data Address Register (SDAR) SPRs as part of extended
registers for the perf tool.
Add these SPR's to sample_reg_mask in the tool side (to use with -I?
option).
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20211018114948.16830-3-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
tools side header file
PERF_REG_PMU_MASK_300 and PERF_REG_PMU_MASK_31 defines the mask value
for extended registers. Current definition of these mask values uses hex
constant and does not use registers by name, making it less readable.
Patch refactor the macro values in perf tools side header file by or'ing
together the actual register value constants.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20211018114948.16830-2-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Introduce function to check end-of-file status.
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Link: https://lore.kernel.org/r/b3b0e0904da01f9ec84d4ae9368df99ecd231598.1634113027.git.alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add READER_OK and READER_NODATA return codes to make the code more
clear.
Suggested-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Riccardo Mancini <rickyman7@gmail.com>
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Tested-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/5fca481e91c3c5d2ba033d4c6e9b969f8033ab0f.1634113027.git.alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Separate the reading code of a single event to a new
reader__read_event() function.
Suggested-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Riccardo Mancini <rickyman7@gmail.com>
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Tested-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/ffe570d937138dd24f282978ce7ed9c46a06ff9b.1634113027.git.alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Move the unmapping code to reader__mmap(), so that the mmap code is
located together.
Move the head/file_offset computation to reader__mmap(), so all the
offset computation is located together and in one place only.
Suggested-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Riccardo Mancini <rickyman7@gmail.com>
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Tested-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/f1c5e17cfa1ecfe912d10b411be203b55d148bc7.1634113027.git.alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Move the mapping code into a separate reader__mmap() function.
Suggested-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Riccardo Mancini <rickyman7@gmail.com>
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Tested-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/e445de5bb85bbd91287986802d6ed0ce1b419b5a.1634113027.git.alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Separate init/release code into reader__init() and reader__release_decomp()
functions.
Remove a duplicate call to ui_progress__init_size(), the same call can
be found in __perf_session__process_events().
For multiple traces ui_progress should be initialized by total size
before reader__init() calls.
Suggested-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Riccardo Mancini <rickyman7@gmail.com>
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Tested-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/8bacf247de220be8e57af1d2b796322175f5e257.1634113027.git.alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Introduce a decompressor data structure with pointers to decomp
objects and to zstd object.
We cannot just move session->zstd_data to decomp_data as
session->zstd_data is not only used for decompression.
Adding decompressor data object to reader object and introducing
active_decomp into perf_session object to select current decompressor.
Thus decompression could be executed separately for each data file.
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Riccardo Mancini <rickyman7@gmail.com>
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Tested-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/0eee270cb52aebcbd029c8445d9009fd17709d53.1634113027.git.alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We need all the state info about reader in separate object to load data
from multiple files, so we can keep multiple readers at the same time.
Moving all items that need to be kept from reader__process_events to
the reader object. Introducing mmap_cur to keep current mapping.
Suggested-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Riccardo Mancini <rickyman7@gmail.com>
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Tested-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/5c7bdebfaadd7fcb729bd999b181feccaa292e8e.1634113027.git.alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Originally, software only supported redirecting at most one PEBS event to
Intel PT (PEBS-via-PT) because it was not able to differentiate one event
from another. To overcome that, add support for the
PERF_RECORD_AUX_OUTPUT_HW_ID side-band event.
Committer notes:
Cast the pointer arg to for_each_set_bit() to (unsigned long *), to fix
the build on 32-bit systems.
Reviewed-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/20210907163903.11820-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Fix the following [-Wstringop-overread] by passing in the variable
instead of the value.
test_vsyscall.c: In function ‘test_process_vm_readv’:
test_vsyscall.c:500:22: warning: ‘__builtin_memcmp_eq’ specified bound 4096 exceeds source size 0 [-Wstringop-overread]
500 | if (!memcmp(buf, (const void *)0xffffffffff600000, 4096)) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Instead of iterating over all the available trap policers, only perform
the tests with three policers: The first, the last and the one in the
middle of the range. On a Spectrum-3 system, this reduces the run time
from almost an hour to a few minutes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The nexthop objects tests configure dummy reachable neighbours so that
the nexthops will have a MAC address and be programmed to the device.
Since these are dummy reachable neighbours, they can be transitioned by
the kernel to a failed state if they are around for too long. This can
happen, for example, if the "TIMEOUT" variable is configured with a too
high value.
Make the tests more robust by configuring the neighbours as permanent,
so that the tests do not depend on the configured timeout value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A number of mlxsw-specific selftests currently detect whether they are run
on a compatible machine, and bail out silently when not. These tests are
however done in a somewhat impenetrable manner by directly comparing PCI
IDs against a blacklist or a whitelist, and bailing out silently if the
machine is not compatible.
Instead, add a helper, mlxsw_only_on_spectrum(), which allows specifying
the supported machines in a human-readable manner. If the current machine
is incompatible, the helper emits a SKIP message and returns an error code,
based on which the caller can gracefully bail out in a suitable way. This
allows a more readable conditions such as:
mlxsw_only_on_spectrum 2+ || return
Convert all existing open-coded guards to the new helper. Also add two new
guards to do_mark_test() and do_drop_test(), which are supported only on
Spectrum-2+, but the corresponding check was not there.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This test is a bit strange in that it is perhaps more manual than
others: it does not transmit a clear OK/FAIL verdict, because user space
does not have synchronous feedback from the kernel. If a hardware access
fails, it is in deferred context.
Nonetheless, on sja1105 I have used it successfully to find and solve a
concurrency issue, so it can be used as a starting point for other
driver maintainers too.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
These programs are useful, but not all selftests require them.
Additionally, on embedded boards without package management (things like
buildroot), installing mausezahn or jq is not always as trivial as
downloading a package from the web.
So it is actually a bit annoying to require programs that are not used.
Introduce options that can be set by scripts to not enforce these
dependencies. For compatibility, default to "yes".
Cc: Nikolay Aleksandrov <nikolay@nvidia.com>
Cc: Ido Schimmel <idosch@nvidia.com>
Cc: Guillaume Nault <gnault@redhat.com>
Cc: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit 965e6b262f48257dbdb51b565ecfd84877a0ab5f, reversing
changes made to 4d98bb0d7ec2d0b417df6207b0bafe1868bad9f8.
|
|
Introduce REPORT_STACK_CANARY to check for differing stack canaries
between two processes (i.e. that an architecture is correctly implementing
per-task stack canaries), using the task_struct canary as the hint to
locate in the stack. Requires that one of the processes being tested
not be pid 1.
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20211022223826.330653-3-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some LKDTM tests need to be run more than once (usually to setup and
then later trigger). Until now, the only case was the SOFT_LOCKUP test,
which wasn't useful to run in the bulk selftests. The coming stack canary
checking needs to run twice, so support this with a new test output prefix
"repeat".
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20211022223826.330653-2-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This test is a bit strange in that it is perhaps more manual than
others: it does not transmit a clear OK/FAIL verdict, because user space
does not have synchronous feedback from the kernel. If a hardware access
fails, it is in deferred context.
Nonetheless, on sja1105 I have used it successfully to find and solve a
concurrency issue, so it can be used as a starting point for other
driver maintainers too.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
These programs are useful, but not all selftests require them.
Additionally, on embedded boards without package management (things like
buildroot), installing mausezahn or jq is not always as trivial as
downloading a package from the web.
So it is actually a bit annoying to require programs that are not used.
Introduce options that can be set by scripts to not enforce these
dependencies. For compatibility, default to "yes".
Cc: Nikolay Aleksandrov <nikolay@nvidia.com>
Cc: Ido Schimmel <idosch@nvidia.com>
Cc: Guillaume Nault <gnault@redhat.com>
Cc: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Original code assumed fixed and correct BTF header length. That's not
always the case, though, so fix this bug with a proper additional check.
And use actual header length instead of sizeof(struct btf_header) in
sanity checks.
Fixes: 8a138aed4a80 ("bpf: btf: Add BTF support to libbpf")
Reported-by: Evgeny Vereshchagin <evvers@ya.ru>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211023003157.726961-2-andrii@kernel.org
|
|
btf_header's str_off+str_len or type_off+type_len can overflow as they
are u32s. This will lead to bypassing the sanity checks during BTF
parsing, resulting in crashes afterwards. Fix by using 64-bit signed
integers for comparison.
Fixes: d8123624506c ("libbpf: Fix BTF data layout checks and allow empty BTF")
Reported-by: Evgeny Vereshchagin <evvers@ya.ru>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211023003157.726961-1-andrii@kernel.org
|
