| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull vfs idmapping updates from Christian Brauner:
- Last cycle we introduced the dedicated struct mnt_idmap type for
mount idmapping and the required infrastucture in 256c8aed2b42 ("fs:
introduce dedicated idmap type for mounts"). As promised in last
cycle's pull request message this converts everything to rely on
struct mnt_idmap.
Currently we still pass around the plain namespace that was attached
to a mount. This is in general pretty convenient but it makes it easy
to conflate namespaces that are relevant on the filesystem with
namespaces that are relevant on the mount level. Especially for
non-vfs developers without detailed knowledge in this area this was a
potential source for bugs.
This finishes the conversion. Instead of passing the plain namespace
around this updates all places that currently take a pointer to a
mnt_userns with a pointer to struct mnt_idmap.
Now that the conversion is done all helpers down to the really
low-level helpers only accept a struct mnt_idmap argument instead of
two namespace arguments.
Conflating mount and other idmappings will now cause the compiler to
complain loudly thus eliminating the possibility of any bugs. This
makes it impossible for filesystem developers to mix up mount and
filesystem idmappings as they are two distinct types and require
distinct helpers that cannot be used interchangeably.
Everything associated with struct mnt_idmap is moved into a single
separate file. With that change no code can poke around in struct
mnt_idmap. It can only be interacted with through dedicated helpers.
That means all filesystems are and all of the vfs is completely
oblivious to the actual implementation of idmappings.
We are now also able to extend struct mnt_idmap as we see fit. For
example, we can decouple it completely from namespaces for users that
don't require or don't want to use them at all. We can also extend
the concept of idmappings so we can cover filesystem specific
requirements.
In combination with the vfs{g,u}id_t work we finished in v6.2 this
makes this feature substantially more robust and thus difficult to
implement wrong by a given filesystem and also protects the vfs.
- Enable idmapped mounts for tmpfs and fulfill a longstanding request.
A long-standing request from users had been to make it possible to
create idmapped mounts for tmpfs. For example, to share the host's
tmpfs mount between multiple sandboxes. This is a prerequisite for
some advanced Kubernetes cases. Systemd also has a range of use-cases
to increase service isolation. And there are more users of this.
However, with all of the other work going on this was way down on the
priority list but luckily someone other than ourselves picked this
up.
As usual the patch is tiny as all the infrastructure work had been
done multiple kernel releases ago. In addition to all the tests that
we already have I requested that Rodrigo add a dedicated tmpfs
testsuite for idmapped mounts to xfstests. It is to be included into
xfstests during the v6.3 development cycle. This should add a slew of
additional tests.
* tag 'fs.idmapped.v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping: (26 commits)
shmem: support idmapped mounts for tmpfs
fs: move mnt_idmap
fs: port vfs{g,u}id helpers to mnt_idmap
fs: port fs{g,u}id helpers to mnt_idmap
fs: port i_{g,u}id_into_vfs{g,u}id() to mnt_idmap
fs: port i_{g,u}id_{needs_}update() to mnt_idmap
quota: port to mnt_idmap
fs: port privilege checking helpers to mnt_idmap
fs: port inode_owner_or_capable() to mnt_idmap
fs: port inode_init_owner() to mnt_idmap
fs: port acl to mnt_idmap
fs: port xattr to mnt_idmap
fs: port ->permission() to pass mnt_idmap
fs: port ->fileattr_set() to pass mnt_idmap
fs: port ->set_acl() to pass mnt_idmap
fs: port ->get_acl() to pass mnt_idmap
fs: port ->tmpfile() to pass mnt_idmap
fs: port ->rename() to pass mnt_idmap
fs: port ->mknod() to pass mnt_idmap
fs: port ->mkdir() to pass mnt_idmap
...
|
|
The do_send_email() will call die before restoring stty if sendmail
setting is not correct or sendmail is not installed. It is safer to
restore it in the beginning of dodie().
Link: https://lkml.kernel.org/r/167420617635.2988775.13045295332829029437.stgit@devnote3
Cc: John 'Warthog9' Hawley <warthog9@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
There is a disconnect between the run_command function and the
wait_for_input. The wait_for_input has a default timeout of 2 minutes. But
if that happens, the run_command loop will exit out to the waitpid() of
the executing command. This fails in that it no longer monitors the
command, and also, the ssh to the test box can hang when its finished, as
it's waiting for the pipe it's writing to to flush, but the loop that
reads that pipe has already exited, leaving the command stuck, and the
test hangs.
Instead, make the default "wait_for_input" of the run_command infinite,
and allow the user to override it if they want with a default timeout
option "RUN_TIMEOUT".
But this fixes the hang that happens when the pipe is full and the ssh
session never exits.
Cc: stable@vger.kernel.org
Fixes: 6e98d1b4415fe ("ktest: Add timeout to ssh command")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
When monitoring the console output, the stdout is being redirected to do
so. If Ctrl^C is hit during this mode, the stdout is not back to the
console, the user does not see anything they type (no echo).
Add "end_monitor" to the SIGINT interrupt handler to give back the console
on Ctrl^C.
Cc: stable@vger.kernel.org
Fixes: 9f2cdcbbb90e7 ("ktest: Give console process a dedicated tty")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
In the "reboot" command, it does a check of the machine to see if it is
still alive with a simple "ssh echo" command. If it fails, it will assume
that a normal "ssh reboot" is not possible and force a power cycle.
In this case, the "start_monitor" is executed, but the "end_monitor" is
not, and this causes the screen will not be given back to the console. That
is, after the test, a "reset" command needs to be performed, as "echo" is
turned off.
Cc: stable@vger.kernel.org
Fixes: 6474ace999edd ("ktest.pl: Powercycle the box on reboot if no connection can be made")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Explicitly check for child netns and main ns independency
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.3
- Provide a virtual cache topology to the guest to avoid
inconsistencies with migration on heterogenous systems. Non secure
software has no practical need to traverse the caches by set/way in
the first place.
- Add support for taking stage-2 access faults in parallel. This was an
accidental omission in the original parallel faults implementation,
but should provide a marginal improvement to machines w/o FEAT_HAFDBS
(such as hardware from the fruit company).
- A preamble to adding support for nested virtualization to KVM,
including vEL2 register state, rudimentary nested exception handling
and masking unsupported features for nested guests.
- Fixes to the PSCI relay that avoid an unexpected host SVE trap when
resuming a CPU when running pKVM.
- VGIC maintenance interrupt support for the AIC
- Improvements to the arch timer emulation, primarily aimed at reducing
the trap overhead of running nested.
- Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the
interest of CI systems.
- Avoid VM-wide stop-the-world operations when a vCPU accesses its own
redistributor.
- Serialize when toggling CPACR_EL1.SMEN to avoid unexpected exceptions
in the host.
- Aesthetic and comment/kerneldoc fixes
- Drop the vestiges of the old Columbia mailing list and add [Oliver]
as co-maintainer
This also drags in arm64's 'for-next/sme2' branch, because both it and
the PSCI relay changes touch the EL2 initialization code.
|
|
Data passed to user-space with a (SOL_UDP, UDP_GRO) cmsg carries an
int (see udp_cmsg_recv), not a u16 value, as strace confirms:
recvmsg(8, {msg_name=...,
msg_iov=[{iov_base="\0\0..."..., iov_len=96000}],
msg_iovlen=1,
msg_control=[{cmsg_len=20, <-- sizeof(cmsghdr) + 4
cmsg_level=SOL_UDP,
cmsg_type=0x68}], <-- UDP_GRO
msg_controllen=24,
msg_flags=0}, 0) = 11200
Interpreting the data as an u16 value won't work on big-endian platforms.
Since it is too late to back out of this API decision [1], fix the test.
[1]: https://lore.kernel.org/netdev/20230131174601.203127-1-jakub@cloudflare.com/
Fixes: 3327a9c46352 ("selftests: add functionals test for UDP GRO")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The canonical location for the tracefs filesystem is at /sys/kernel/tracing.
But, from Documentation/trace/ftrace.rst:
Before 4.1, all ftrace tracing control files were within the debugfs
file system, which is typically located at /sys/kernel/debug/tracing.
For backward compatibility, when mounting the debugfs file system,
the tracefs file system will be automatically mounted at:
/sys/kernel/debug/tracing
Many comments and Kconfig help messages in the tracing code still refer
to this older debugfs path, so let's update them to avoid confusion.
Link: https://lore.kernel.org/linux-trace-kernel/20230215223350.2658616-2-zwisler@google.com
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Ross Zwisler <zwisler@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
This patch tests the bpf_fib_lookup helper when looking up
a neigh in NUD_FAILED and NUD_STALE state. It also adds test
for the new BPF_FIB_LOOKUP_SKIP_NEIGH flag.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230217205515.3583372-2-martin.lau@linux.dev
|
|
The bpf_fib_lookup() also looks up the neigh table.
This was done before bpf_redirect_neigh() was added.
In the use case that does not manage the neigh table
and requires bpf_fib_lookup() to lookup a fib to
decide if it needs to redirect or not, the bpf prog can
depend only on using bpf_redirect_neigh() to lookup the
neigh. It also keeps the neigh entries fresh and connected.
This patch adds a bpf_fib_lookup flag, SKIP_NEIGH, to avoid
the double neigh lookup when the bpf prog always call
bpf_redirect_neigh() to do the neigh lookup. The params->smac
output is skipped together when SKIP_NEIGH is set because
bpf_redirect_neigh() will figure out the smac also.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230217205515.3583372-1-martin.lau@linux.dev
|
|
This reverts commit 6c20822fada1b8adb77fa450d03a0d449686a4a9.
build bot failed on arch with different cache line size:
https://lore.kernel.org/bpf/50c35055-afa9-d01e-9a05-ea5351280e4f@intel.com/
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
system wide check
Testcase stat_all_metrics.sh fails in powerpc:
98: perf all metrics test : FAILED!
Logs with verbose:
[command]# ./perf test 98 -vv
98: perf all metrics test :
--- start ---
test child forked, pid 13262
Testing BRU_STALL_CPI
Testing COMPLETION_STALL_CPI
----
Testing TOTAL_LOCAL_NODE_PUMPS_P23
Metric 'TOTAL_LOCAL_NODE_PUMPS_P23' not printed in:
Error:
Invalid event (hv_24x7/PM_PB_LNS_PUMP23,chip=3/) in per-thread mode, enable system wide with '-a'.
Testing TOTAL_LOCAL_NODE_PUMPS_RETRIES_P01
Metric 'TOTAL_LOCAL_NODE_PUMPS_RETRIES_P01' not printed in:
Error:
Invalid event (hv_24x7/PM_PB_RTY_LNS_PUMP01,chip=3/) in per-thread mode, enable system wide with '-a'.
----
Based on above logs, we could see some of the hv-24x7 metric events
fails, and logs suggest to run the metric event with -a option. This
change happened after the commit a4b8cfcabb1d90ec ("perf stat: Delay
metric parsing"), which delayed the metric parsing phase and now before
metric parsing phase perf tool identifies, whether target is system-wide
or not. With this change, perf_event_open will fails with workload
monitoring for uncore events as expected.
The perf all metric test case fails as some of the hv-24x7 metric events
may need bigger workload with system wide monitoring to get the data.
Fix this issue by changing current system wide check from true workload
to sleep 0.01 workload.
Result with the patch changes in powerpc:
98: perf all metrics test : Ok
Fixes: a4b8cfcabb1d90ec ("perf stat: Delay metric parsing")
Suggested-by: Ian Rogers <irogers@google.com>
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230215093827.124921-1-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add tests validating that it's possible to pass context arguments into
global subprogs for various types of programs, including a particularly
tricky KPROBE programs (which cover kprobes, uprobes, USDTs, a vast and
important class of programs).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230216045954.3002473-4-andrii@kernel.org
|
|
Convert 17 test_global_funcs subtests into test_loader framework for
easier maintenance and more declarative way to define expected
failures/successes.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230216045954.3002473-3-andrii@kernel.org
|
|
cycles in powerpc
Power10 Performance Monitoring Unit (PMU) provides events to understand
stall cycles of different pipeline stages. These events along with
completed instructions provides useful metrics for application tuning.
Patch implements the JSON changes to collect counter statistics to
present the high level CPI stall breakdown metrics. New metric group is
named as "CPI_STALL_RATIO" and this new metric group presents these
stall metrics:
- DISPATCHED_CPI ( Dispatch stall cycles per insn )
- ISSUE_STALL_CPI ( Issue stall cycles per insn )
- EXECUTION_STALL_CPI ( Execution stall cycles per insn )
- COMPLETION_STALL_CPI ( Completition stall cycles per insn )
To avoid multipling of events, PM_RUN_INST_CMPL event has been modified
to use PMC5(performance monitoring counter5) instead of PMC4. This
change is needed, since completion stall event is using PMC4.
Usage example:
./perf stat --metric-no-group -M CPI_STALL_RATIO <workload>
Performance counter stats for 'workload':
63,056,817,982 PM_CMPL_STALL # 0.28 COMPLETION_STALL_CPI
1,743,988,038,896 PM_ISSUE_STALL # 7.73 ISSUE_STALL_CPI
225,597,495,030 PM_RUN_INST_CMPL # 6.18 DISPATCHED_CPI
# 37.48 EXECUTION_STALL_CPI
1,393,916,546,654 PM_DISP_STALL_CYC
8,455,376,836,463 PM_EXEC_STALL
"--metric-no-group" is used for forcing PM_RUN_INST_CMPL to be scheduled
in all group for more accuracy.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230216061240.18067-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
There is no good reason why we cannot synthesize "cycle" events from
Intel PT just as we can synthesize "instruction" events, in particular
when CYC packets are available. This enables using PT to getting much
more accurate cycle profiles than regular sampling (record -e cycles)
when the work last for very short periods (<10 ms). Thus, add support
for this, based off of the existing IPC calculation framework. The new
option to --itrace is "y" (for cYcles), as c was taken for calls. Cycle
and instruction events can be synthesized together, and are by default.
The only real caveat is that CYC packets are only emitted whenever some
other packet is, which in practice is when a branch instruction is
encountered (and not even all branches). Thus, even at no subsampling
(e.g. --itrace=y0ns), it is impossible to get more accuracy than a
single basic block, and all cycles spent executing that block will get
attributed to the branch instruction that ends the packet. Thus, one
cannot know whether the cycles came from e.g. a specific load, a
mispredicted branch, or something else. When subsampling (which is the
default), the cycle events will get smeared out even more, but will
still be generally useful to attribute cycle counts to functions.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Steinar H. Gunderson <sesse@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220322082452.1429091-1-sesse@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Some of the devlink bits were tricky, but I think I got it right.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Run spell checker on files in selftest/bpf and fixed typos.
Signed-off-by: Taichi Nishimura <awkrail01@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/bpf/20230216085537.519062-1-awkrail01@gmail.com
|
|
Use the new type-safe wrappers around bpf_obj_get_info_by_fd().
Fix a prog/map mixup in prog_holds_map().
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230214231221.249277-6-iii@linux.ibm.com
|
|
Use the new type-safe wrappers around bpf_obj_get_info_by_fd().
Split the bpf_obj_get_info_by_fd() call in build_btf_type_table() in
two, since knowing the type helps with the Memory Sanitizer.
Improve map_parse_fd_and_info() type safety by using
struct bpf_map_info * instead of void * for info.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20230214231221.249277-4-iii@linux.ibm.com
|
|
Use the new type-safe wrappers around bpf_obj_get_info_by_fd().
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230214231221.249277-3-iii@linux.ibm.com
|
|
These are type-safe wrappers around bpf_obj_get_info_by_fd(). They
found one problem in selftests, and are also useful for adding
Memory Sanitizer annotations.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230214231221.249277-2-iii@linux.ibm.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Fixes from the main networking tree only, probably because all
sub-trees have backed off and haven't submitted their changes.
None of the fixes here are particularly scary and no outstanding
regressions. In an ideal world the "current release" sections would be
empty at this stage but that never happens.
Current release - regressions:
- fix unwanted sign extension in netdev_stats_to_stats64()
Current release - new code bugs:
- initialize net->notrefcnt_tracker earlier
- devlink: fix netdev notifier chain corruption
- nfp: make sure mbox accesses in IPsec code are atomic
- ice: fix check for weight and priority of a scheduling node
Previous releases - regressions:
- ice: xsk: fix cleaning of XDP_TX frame, prevent inf loop
- igb: fix I2C bit banging config with external thermal sensor
Previous releases - always broken:
- sched: tcindex: update imperfect hash filters respecting rcu
- mpls: fix stale pointer if allocation fails during device rename
- dccp/tcp: avoid negative sk_forward_alloc by ipv6_pinfo.pktoptions
- remove WARN_ON_ONCE(sk->sk_forward_alloc) from
sk_stream_kill_queues()
- af_key: fix heap information leak
- ipv6: fix socket connection with DSCP (correct interpretation of
the tclass field vs fib rule matching)
- tipc: fix kernel warning when sending SYN message
- vmxnet3: read RSS information from the correct descriptor (eop)"
* tag 'net-6.2-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits)
devlink: Fix netdev notifier chain corruption
igb: conditionalize I2C bit banging on external thermal sensor support
net: mpls: fix stale pointer if allocation fails during device rename
net/sched: tcindex: search key must be 16 bits
tipc: fix kernel warning when sending SYN message
igb: Fix PPS input and output using 3rd and 4th SDP
net: use a bounce buffer for copying skb->mark
ixgbe: add double of VLAN header when computing the max MTU
i40e: add double of VLAN header when computing the max MTU
ixgbe: allow to increase MTU to 3K with XDP enabled
net: stmmac: Restrict warning on disabling DMA store and fwd mode
net/sched: act_ctinfo: use percpu stats
net: stmmac: fix order of dwmac5 FlexPPS parametrization sequence
ice: fix lost multicast packets in promisc mode
ice: Fix check for weight and priority of a scheduling node
bnxt_en: Fix mqprio and XDP ring checking logic
net: Fix unwanted sign extension in netdev_stats_to_stats64()
net/usb: kalmia: Don't pass act_len in usb_bulk_msg error path
net: openvswitch: fix possible memory leak in ovs_meter_cmd_set()
af_key: Fix heap information leak
...
|
|
Pull vga_switcheroo fix for Macs
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Many platforms have feature of adjacent cachelines prefetch, when it is
enabled, for data in RAM of 2 cachelines (2N and 2N+1) granularity, if
one is fetched to cache, the other one could likely be fetched too,
which sort of extends the cacheline size to double, thus the false
sharing could happens in adjacent cachelines.
0Day has captured performance changed related with this [1], and some
commercial software explicitly makes its hot global variables 128 bytes
aligned (2 cache lines) to avoid this kind of extended false sharing.
So add an option "--double-cl" for 'perf c2c report' to show false
sharing in double cache line granularity, which acts just like the
cacheline size is doubled. There is no change to c2c record. The
hardware events of shared cacheline are still per cacheline, and this
option just changes the granularity of how events are grouped and
displayed.
In the 'perf c2c report' output below (will-it-scale's 'pagefault2' case
on old kernel):
----------------------------------------------------------------------
26 31 2 0 0 0 0xffff888103ec6000
----------------------------------------------------------------------
35.48% 50.00% 0.00% 0.00% 0.00% 0x10 0 1 0xffffffff8133148b 1153 66 971 3748 74 [k] get_mem_cgroup_from_mm
6.45% 0.00% 0.00% 0.00% 0.00% 0x10 0 1 0xffffffff813396e4 570 0 1531 879 75 [k] mem_cgroup_charge
25.81% 50.00% 0.00% 0.00% 0.00% 0x54 0 1 0xffffffff81331472 949 70 593 3359 74 [k] get_mem_cgroup_from_mm
19.35% 0.00% 0.00% 0.00% 0.00% 0x54 0 1 0xffffffff81339686 1352 0 1073 1022 74 [k] mem_cgroup_charge
9.68% 0.00% 0.00% 0.00% 0.00% 0x54 0 1 0xffffffff813396d6 1401 0 863 768 74 [k] mem_cgroup_charge
3.23% 0.00% 0.00% 0.00% 0.00% 0x54 0 1 0xffffffff81333106 618 0 804 11 9 [k] uncharge_batch
The offset 0x10 and 0x54 used to displayed in 2 groups, and now they are
listed together to give users a hint of extended false sharing.
[1]. https://lore.kernel.org/lkml/20201102091543.GM31092@shao2-debian/
Committer notes:
Link: https://lore.kernel.org/r/Y+wvVNWqXb70l4uy@feng-clx
Removed -a, leaving just as --double-cl, as this probably is not used so
frequently and perhaps will be even auto-detected if we manage to record
the MSR where this is configured.
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Joe Mario <jmario@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20230214075823.246414-1-feng.tang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This selftest is designed for testing the PSP flavor in SRv6 End behavior.
It instantiates a virtual network composed of several nodes: hosts and
SRv6 routers. Each node is realized using a network namespace that is
properly interconnected to others through veth pairs.
The test makes use of the SRv6 End behavior and of the PSP flavor needed
for removing the SRH from the IPv6 header at the penultimate node.
The correct execution of the behavior is verified through reachability
tests carried out between hosts.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Paolo Lungaroni <paolo.lungaroni@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The rsvp classifier has served us well for about a quarter of a century but has
has not been getting much maintenance attention due to lack of known users.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The tcindex classifier has served us well for about a quarter of a century
but has not been getting much TLC due to lack of known users. Most recently
it has become easy prey to syzkaller. For this reason, we are retiring it.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The dsmark qdisc has served us well over the years for diffserv but has not
been getting much attention due to other more popular approaches to do diffserv
services. Most recently it has become a shooting target for syzkaller. For this
reason, we are retiring it.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The ATM qdisc has served us well over the years but has not been getting much
TLC due to lack of known users. Most recently it has become a shooting target
for syzkaller. For this reason, we are retiring it.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
While this amazing qdisc has served us well over the years it has not been
getting any tender love and care and has bitrotted over time.
It has become mostly a shooting target for syzkaller lately.
For this reason, we are retiring it. Goodbye CBQ - we loved you.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
remove temporary files created by 'mirred_egress_to_ingress_tcp' test
in the cleanup() handler. Also, change variable names to avoid clashing
with globals from lib.sh.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/091649045a017fc00095ecbb75884e5681f7025f.1676368027.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
&xdp_buff and &xdp_frame are bound in a way that
xdp_buff->data_hard_start == xdp_frame
It's always the case and e.g. xdp_convert_buff_to_frame() relies on
this.
IOW, the following:
for (u32 i = 0; i < 0xdead; i++) {
xdpf = xdp_convert_buff_to_frame(&xdp);
xdp_convert_frame_to_buff(xdpf, &xdp);
}
shouldn't ever modify @xdpf's contents or the pointer itself.
However, "live packet" code wrongly treats &xdp_frame as part of its
context placed *before* the data_hard_start. With such flow,
data_hard_start is sizeof(*xdpf) off to the right and no longer points
to the XDP frame.
Instead of replacing `sizeof(ctx)` with `offsetof(ctx, xdpf)` in several
places and praying that there are no more miscalcs left somewhere in the
code, unionize ::frm with ::data in a flex array, so that both starts
pointing to the actual data_hard_start and the XDP frame actually starts
being a part of it, i.e. a part of the headroom, not the context.
A nice side effect is that the maximum frame size for this mode gets
increased by 40 bytes, as xdp_buff::frame_sz includes everything from
data_hard_start (-> includes xdpf already) to the end of XDP/skb shared
info.
Also update %MAX_PKT_SIZE accordingly in the selftests code. Leave it
hardcoded for 64 bit && 4k pages, it can be made more flexible later on.
Minor: align `&head->data` with how `head->frm` is assigned for
consistency.
Minor #2: rename 'frm' to 'frame' in &xdp_page_head while at it for
clarity.
(was found while testing XDP traffic generator on ice, which calls
xdp_convert_frame_to_buff() for each XDP frame)
Fixes: b530e9e1063e ("bpf: Add "live packet" mode for XDP in BPF_PROG_RUN")
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20230215185440.4126672-1-aleksander.lobakin@intel.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Add a new benchmark which measures hashmap lookup operations speed. A user can
control the following parameters of the benchmark:
* key_size (max 1024): the key size to use
* max_entries: the hashmap max entries
* nr_entries: the number of entries to insert/lookup
* nr_loops: the number of loops for the benchmark
* map_flags The hashmap flags passed to BPF_MAP_CREATE
The BPF program performing the benchmarks calls two nested bpf_loop:
bpf_loop(nr_loops/nr_entries)
bpf_loop(nr_entries)
bpf_map_lookup()
So the nr_loops determines the number of actual map lookups. All lookups are
successful.
Example (the output is generated on a AMD Ryzen 9 3950X machine):
for nr_entries in `seq 4096 4096 65536`; do echo -n "$((nr_entries*100/65536))% full: "; sudo ./bench -d2 -a bpf-hashmap-lookup --key_size=4 --nr_entries=$nr_entries --max_entries=65536 --nr_loops=1000000 --map_flags=0x40 | grep cpu; done
6% full: cpu01: lookup 50.739M ± 0.018M events/sec (approximated from 32 samples of ~19ms)
12% full: cpu01: lookup 47.751M ± 0.015M events/sec (approximated from 32 samples of ~20ms)
18% full: cpu01: lookup 45.153M ± 0.013M events/sec (approximated from 32 samples of ~22ms)
25% full: cpu01: lookup 43.826M ± 0.014M events/sec (approximated from 32 samples of ~22ms)
31% full: cpu01: lookup 41.971M ± 0.012M events/sec (approximated from 32 samples of ~23ms)
37% full: cpu01: lookup 41.034M ± 0.015M events/sec (approximated from 32 samples of ~24ms)
43% full: cpu01: lookup 39.946M ± 0.012M events/sec (approximated from 32 samples of ~25ms)
50% full: cpu01: lookup 38.256M ± 0.014M events/sec (approximated from 32 samples of ~26ms)
56% full: cpu01: lookup 36.580M ± 0.018M events/sec (approximated from 32 samples of ~27ms)
62% full: cpu01: lookup 36.252M ± 0.012M events/sec (approximated from 32 samples of ~27ms)
68% full: cpu01: lookup 35.200M ± 0.012M events/sec (approximated from 32 samples of ~28ms)
75% full: cpu01: lookup 34.061M ± 0.009M events/sec (approximated from 32 samples of ~29ms)
81% full: cpu01: lookup 34.374M ± 0.010M events/sec (approximated from 32 samples of ~29ms)
87% full: cpu01: lookup 33.244M ± 0.011M events/sec (approximated from 32 samples of ~30ms)
93% full: cpu01: lookup 32.182M ± 0.013M events/sec (approximated from 32 samples of ~31ms)
100% full: cpu01: lookup 31.497M ± 0.016M events/sec (approximated from 32 samples of ~31ms)
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230213091519.1202813-8-aspsk@isovalent.com
|
|
The bench utility will print
Setting up benchmark '<bench-name>'...
Benchmark '<bench-name>' started.
on startup to stdout. Suppress this output if --quiet option if given. This
makes it simpler to parse benchmark output by a script.
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230213091519.1202813-7-aspsk@isovalent.com
|
|
The "local-storage-tasks-trace" benchmark has a `--quiet` option. Move it to
the list of common options, so that the main code and other benchmarks can use
(new) env.quiet variable. Patch the run_bench_local_storage_rcu_tasks_trace.sh
helper script accordingly.
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230213091519.1202813-6-aspsk@isovalent.com
|
|
The benchs/bench_bpf_hashmap_full_update.c doesn't set a custom argp,
so it shouldn't include the <argp.h> header.
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230213091519.1202813-5-aspsk@isovalent.com
|
|
To parse command line the bench utility uses the argp_parse() function. This
function takes as an argument a parent 'struct argp' structure which defines
common command line options and an array of children 'struct argp' structures
which defines additional command line options for particular benchmarks. This
implementation doesn't allow benchmarks to share option names, e.g., if two
benchmarks want to use, say, the --option option, then only one of them will
succeed (the first one encountered in the array). This will be convenient if
same option names could be used in different benchmarks (with the same
semantics, e.g., --nr_loops=N).
Fix this by calling the argp_parse() function twice. The first call is the same
as it was before, with all children argps, and helps to find the benchmark name
and to print a combined help message if anything is wrong. Given the name, we
can call the argp_parse the second time, but now the children array points only
to a correct benchmark thus always calling the correct parsers. (If there's no
a specific list of arguments, then only one call to argp_parse will be done.)
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230213091519.1202813-4-aspsk@isovalent.com
|
|
The hashmap_report_final callback function defined in the
benchs/bench_bpf_hashmap_full_update.c file should be static.
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230213091519.1202813-3-aspsk@isovalent.com
|
|
To call the bpf_hashmap_full_update benchmark, one should say:
bench bpf-hashmap-ful-update
The patch adds a missing 'l' to the benchmark name.
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230213091519.1202813-2-aspsk@isovalent.com
|
|
The reinitialization of spin-lock in map value after immediate reuse may
corrupt lookup with BPF_F_LOCK flag and result in hard lock-up, so add
one test case to demonstrate the problem.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20230215082132.3856544-3-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
A test case to verify that variable offset BPF_ST instruction
preserves STACK_ZERO marks when writes zeros, e.g. in the following
situation:
*(u64*)(r10 - 8) = 0 ; STACK_ZERO marks for fp[-8]
r0 = random(-7, -1) ; some random number in range of [-7, -1]
r0 += r10 ; r0 is now variable offset pointer to stack
*(u8*)(r0) = 0 ; BPF_ST writing zero, STACK_ZERO mark for
; fp[-8] should be preserved.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230214232030.1502829-5-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Check that verifier tracks the value of 'imm' spilled to stack by
BPF_ST_MEM instruction. Cover the following cases:
- write of non-zero constant to stack;
- write of a zero constant to stack.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230214232030.1502829-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
For aligned stack writes using BPF_ST instruction track stored values
in a same way BPF_STX is handled, e.g. make sure that the following
commands produce similar verifier knowledge:
fp[-8] = 42; r1 = 42;
fp[-8] = r1;
This covers two cases:
- non-null values written to stack are stored as spill of fake
registers;
- null values written to stack are stored as STACK_ZERO marks.
Previously both cases above used STACK_MISC marks instead.
Some verifier test cases relied on the old logic to obtain STACK_MISC
marks for some stack values. These test cases are updated in the same
commit to avoid failures during bisect.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230214232030.1502829-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Merge power management utilities and documentation updates for 6.3-rc1:
- Modify some power management utilities to use the canonical ftrace
path (Ross Zwisler).
- Correct spelling problems for Documentation/power/ as reported by
codespell (Randy Dunlap).
* pm-tools:
PM: tools: use canonical ftrace path
* pm-docs:
Documentation: power: correct spelling
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
* Two more V!=R patches
* The last part of the cmpxchg patches
* A few fixes
|
|
KVM/riscv changes for 6.3
- Fix wrong usage of PGDIR_SIZE to check page sizes
- Fix privilege mode setting in kvm_riscv_vcpu_trap_redirect()
- Redirect illegal instruction traps to guest
- SBI PMU support for guest
|
|
The compiler is optimizing out majority of unref_ptr read/writes, so the test
wasn't testing much. For example, one could delete '__kptr' tag from
'struct prog_test_ref_kfunc __kptr *unref_ptr;' and the test would still "pass".
Convert it to volatile stores. Confirmed by comparing bpf asm before/after.
Fixes: 2cbc469a6fc3 ("selftests/bpf: Add C tests for kptr")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230214235051.22938-1-alexei.starovoitov@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
When the BPF selftests are cross-compiled, only the a host version of
bpftool is built. This version of bpftool is used on the host-side to
generate various intermediates, e.g., skeletons.
The test runners are also using bpftool, so the Makefile will symlink
bpftool from the selftest/bpf root, where the test runners will look
the tool:
| $(Q)ln -sf $(if $2,..,.)/tools/build/bpftool/bootstrap/bpftool \
| $(OUTPUT)/$(if $2,$2/)bpftool
There are two problems for cross-compilation builds:
1. There is no native (cross-compilation target) of bpftool
2. The bootstrap/bpftool is never cross-compiled (by design)
Make sure that a native/cross-compiled version of bpftool is built,
and if CROSS_COMPILE is set, symlink the native/non-bootstrap version.
Acked-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20230214161253.183458-1-bjorn@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
