summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2023-12-22Merge tag 'sound-6.7-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Apparently there were so many kids wishing bug fixes that made Santa busy; here we have lots of fixes although it's a bit late. But all changes are device-specific, hence it should be relatively safe to apply. Most of changes are for Cirrus codecs (for both ASoC and HD-audio), while the remaining are fixes for TI codecs, HD-audio and USB-audio quirks" * tag 'sound-6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits) ALSA: hda: cs35l41: Only add SPI CS GPIO if SPI is enabled in kernel ALSA: hda: cs35l41: Do not allow uninitialised variables to be freed ASoC: fsl_sai: Fix channel swap issue on i.MX8MP ASoC: hdmi-codec: fix missing report for jack initial status ALSA: hda/realtek: Add quirks for ASUS Zenbook 2023 Models ALSA: hda: cs35l41: Support additional ASUS Zenbook 2023 Models ALSA: hda/realtek: Add quirks for ASUS Zenbook 2022 Models ALSA: hda: cs35l41: Support additional ASUS Zenbook 2022 Models ALSA: hda/realtek: Add quirks for ASUS ROG 2023 models ALSA: hda: cs35l41: Support additional ASUS ROG 2023 models ALSA: hda: cs35l41: Add config table to support many laptops without _DSD ASoC: Intel: bytcr_rt5640: Add new swapped-speakers quirk ASoC: Intel: bytcr_rt5640: Add quirk for the Medion Lifetab S10346 kselftest: alsa: fixed a print formatting warning ALSA: usb-audio: Increase delay in MOTU M quirk ASoC: tas2781: check the validity of prm_no/cfg_no ALSA: hda/tas2781: select program 0, conf 0 by default ALSA: hda/realtek: Add quirk for ASUS ROG GV302XA ASoC: cs42l43: Don't enable bias sense during type detect ASoC: Intel: soc-acpi-intel-mtl-match: Change CS35L56 prefixes to AMPn ...
2023-12-22selftests/landlock: Add tests to check unhandled rule's access rightsMickaël Salaün
Add two tests to make sure that we cannot add a rule to a ruleset if the rule's access rights that are not handled by the ruleset: * fs: layout1.rule_with_unhandled_access * net: mini.rule_with_unhandled_access Cc: Konstantin Meskhidze <konstantin.meskhidze@huawei.com> Reviewed-by: Günther Noack <gnoack@google.com> Link: https://lore.kernel.org/r/20231130093616.67340-3-mic@digikod.net Signed-off-by: Mickaël Salaün <mic@digikod.net>
2023-12-22selftests/landlock: Add tests to check unknown rule's access rightsMickaël Salaün
Add two tests to make sure that we cannot add a rule with access rights that are unknown: * fs: layout0.rule_with_unknown_access * net: mini.rule_with_unknown_access Rename unknown_access_rights tests to ruleset_with_unknown_access . Cc: Konstantin Meskhidze <konstantin.meskhidze@huawei.com> Reviewed-by: Günther Noack <gnoack@google.com> Link: https://lore.kernel.org/r/20231130093616.67340-2-mic@digikod.net Signed-off-by: Mickaël Salaün <mic@digikod.net>
2023-12-22netfilter: ctnetlink: support filtering by zoneFelix Huettner
conntrack zones are heavily used by tools like openvswitch to run multiple virtual "routers" on a single machine. In this context each conntrack zone matches to a single router, thereby preventing overlapping IPs from becoming issues. In these systems it is common to operate on all conntrack entries of a given zone, e.g. to delete them when a router is deleted. Previously this required these tools to dump the full conntrack table and filter out the relevant entries in userspace potentially causing performance issues. To do this we reuse the existing CTA_ZONE attribute. This was previous parsed but not used during dump and flush requests. Now if CTA_ZONE is set we filter these operations based on the provided zone. However this means that users that previously passed CTA_ZONE will experience a difference in functionality. Alternatively CTA_FILTER could have been used for the same functionality. However it is not yet supported during flush requests and is only available when using AF_INET or AF_INET6. Co-developed-by: Luca Czesla <luca.czesla@mail.schwarz> Signed-off-by: Luca Czesla <luca.czesla@mail.schwarz> Co-developed-by: Max Lamprecht <max.lamprecht@mail.schwarz> Signed-off-by: Max Lamprecht <max.lamprecht@mail.schwarz> Signed-off-by: Felix Huettner <felix.huettner@mail.schwarz> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-12-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
Cross-merge networking fixes after downstream PR. Adjacent changes: drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c 23c93c3b6275 ("bnxt_en: do not map packet buffers twice") 6d1add95536b ("bnxt_en: Modify TX ring indexing logic.") tools/testing/selftests/net/Makefile 2258b666482d ("selftests: add vlan hw filter tests") a0bc96c0cd6e ("selftests: net: verify fq per-band packet limit") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-21Merge tag 'net-6.7-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from WiFi and bpf. Current release - regressions: - bpf: syzkaller found null ptr deref in unix_bpf proto add - eth: i40e: fix ST code value for clause 45 Previous releases - regressions: - core: return error from sk_stream_wait_connect() if sk_wait_event() fails - ipv6: revert remove expired routes with a separated list of routes - wifi rfkill: - set GPIO direction - fix crash with WED rx support enabled - bluetooth: - fix deadlock in vhci_send_frame - fix use-after-free in bt_sock_recvmsg - eth: mlx5e: fix a race in command alloc flow - eth: ice: fix PF with enabled XDP going no-carrier after reset - eth: bnxt_en: do not map packet buffers twice Previous releases - always broken: - core: - check vlan filter feature in vlan_vids_add_by_dev() and vlan_vids_del_by_dev() - check dev->gso_max_size in gso_features_check() - mptcp: fix inconsistent state on fastopen race - phy: skip LED triggers on PHYs on SFP modules - eth: mlx5e: - fix double free of encap_header - fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list()" * tag 'net-6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits) net: check dev->gso_max_size in gso_features_check() kselftest: rtnetlink.sh: use grep_fail when expecting the cmd fail net/ipv6: Revert remove expired routes with a separated list of routes net: avoid build bug in skb extension length calculation net: ethernet: mtk_wed: fix possible NULL pointer dereference in mtk_wed_wo_queue_tx_clean() net: stmmac: fix incorrect flag check in timestamp interrupt selftests: add vlan hw filter tests net: check vlan filter feature in vlan_vids_add_by_dev() and vlan_vids_del_by_dev() net: hns3: add new maintainer for the HNS3 ethernet driver net: mana: select PAGE_POOL net: ks8851: Fix TX stall caused by TX buffer overrun ice: Fix PF with enabled XDP going no-carrier after reset ice: alter feature support check for SRIOV and LAG ice: stop trashing VF VSI aggregator node ID information mailmap: add entries for Geliang Tang mptcp: fill in missing MODULE_DESCRIPTION() mptcp: fix inconsistent state on fastopen race selftests: mptcp: join: fix subflow_send_ack lookup net: phy: skip LED triggers on PHYs on SFP modules bpf: Add missing BPF_LINK_TYPE invocations ...
2023-12-21selftests/overlayfs: verify device and inode numbers in /proc/pid/mapsAndrei Vagin
When mapping a file on overlayfs, the file stored in ->vm_file is a backing file whose f_inode is on the underlying filesystem. We need to verify that /proc/pid/maps contains numbers of the overlayfs file, but not its backing file. Cc: Amir Goldstein <amir73il@gmail.com> Cc: Alexander Mikhalitsyn <alexander@mihalicyn.com> Signed-off-by: Andrei Vagin <avagin@google.com> Link: https://lore.kernel.org/r/20231214064439.1023011-2-avagin@google.com Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-12-21Merge tag 'for-netdev' of ↵Paolo Abeni
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2023-12-21 Hi David, hi Jakub, hi Paolo, hi Eric, The following pull-request contains BPF updates for your *net* tree. We've added 3 non-merge commits during the last 5 day(s) which contain a total of 4 files changed, 45 insertions(+). The main changes are: 1) Fix a syzkaller splat which triggered an oob issue in bpf_link_show_fdinfo(), from Jiri Olsa. 2) Fix another syzkaller-found issue which triggered a NULL pointer dereference in BPF sockmap for unconnected unix sockets, from John Fastabend. bpf-for-netdev * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Add missing BPF_LINK_TYPE invocations bpf: sockmap, test for unconnected af_unix sock bpf: syzkaller found null ptr deref in unix_bpf proto add ==================== Link: https://lore.kernel.org/r/20231221104844.1374-1-daniel@iogearbox.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-21selftests/powerpc: Fix spelling mistake "EACCESS" -> "EACCES"Colin Ian King
There is a spelling mistake of the EACCES error name, fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231215112456.13554-1-colin.i.king@gmail.com
2023-12-21libbpf: Fix NULL pointer dereference in bpf_object__collect_prog_relosMingyi Zhang
An issue occurred while reading an ELF file in libbpf.c during fuzzing: Program received signal SIGSEGV, Segmentation fault. 0x0000000000958e97 in bpf_object.collect_prog_relos () at libbpf.c:4206 4206 in libbpf.c (gdb) bt #0 0x0000000000958e97 in bpf_object.collect_prog_relos () at libbpf.c:4206 #1 0x000000000094f9d6 in bpf_object.collect_relos () at libbpf.c:6706 #2 0x000000000092bef3 in bpf_object_open () at libbpf.c:7437 #3 0x000000000092c046 in bpf_object.open_mem () at libbpf.c:7497 #4 0x0000000000924afa in LLVMFuzzerTestOneInput () at fuzz/bpf-object-fuzzer.c:16 #5 0x000000000060be11 in testblitz_engine::fuzzer::Fuzzer::run_one () #6 0x000000000087ad92 in tracing::span::Span::in_scope () #7 0x00000000006078aa in testblitz_engine::fuzzer::util::walkdir () #8 0x00000000005f3217 in testblitz_engine::entrypoint::main::{{closure}} () #9 0x00000000005f2601 in main () (gdb) scn_data was null at this code(tools/lib/bpf/src/libbpf.c): if (rel->r_offset % BPF_INSN_SZ || rel->r_offset >= scn_data->d_size) { The scn_data is derived from the code above: scn = elf_sec_by_idx(obj, sec_idx); scn_data = elf_sec_data(obj, scn); relo_sec_name = elf_sec_str(obj, shdr->sh_name); sec_name = elf_sec_name(obj, scn); if (!relo_sec_name || !sec_name)// don't check whether scn_data is NULL return -EINVAL; In certain special scenarios, such as reading a malformed ELF file, it is possible that scn_data may be a null pointer Signed-off-by: Mingyi Zhang <zhangmingyi5@huawei.com> Signed-off-by: Xin Liu <liuxin350@huawei.com> Signed-off-by: Changye Wu <wuchangye@huawei.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20231221033947.154564-1-liuxin350@huawei.com
2023-12-21libbpf: Skip DWARF sections in linker sanity checkAlyssa Ross
clang can generate (with -g -Wa,--compress-debug-sections) 4-byte aligned DWARF sections that declare themselves to be 8-byte aligned in the section header. Since DWARF sections are dropped during linking anyway, just skip running the sanity checks on them. Reported-by: Sergei Trofimovich <slyich@gmail.com> Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com> Signed-off-by: Alyssa Ross <hi@alyssa.is> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Closes: https://lore.kernel.org/bpf/ZXcFRJVKbKxtEL5t@nz.home/ Link: https://lore.kernel.org/bpf/20231219110324.8989-1-hi@alyssa.is
2023-12-21kselftest: rtnetlink.sh: use grep_fail when expecting the cmd failHangbin Liu
run_cmd_grep_fail should be used when expecting the cmd fail, or the ret will be set to 1, and the total test return 1 when exiting. This would cause the result report to fail if run via run_kselftest.sh. Before fix: # ./rtnetlink.sh -t kci_test_addrlft PASS: preferred_lft addresses have expired # echo $? 1 After fix: # ./rtnetlink.sh -t kci_test_addrlft PASS: preferred_lft addresses have expired # echo $? 0 Fixes: 9c2a19f71515 ("kselftest: rtnetlink.sh: add verbose flag") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20231219065737.1725120-1-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-20selftests/damon: add a test for update_schemes_tried_regions hang bugSeongJae Park
Add a test for reproducing the update_schemes_tried_{regions,bytes} command-causing indefinite hang bug that fixed by commit 7d6fa31a2fd7 ("mm/damon/sysfs-schemes: add timeout for update_schemes_tried_regions"), to avoid mistakenly re-introducing the bug. Refer to the fix commit for more details of the bug. Link: https://lkml.kernel.org/r/20231212194810.54457-6-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-20selftests/damon: add a test for update_schemes_tried_regions sysfs commandSeongJae Park
Add a selftest for verifying the accuracy of DAMON's access monitoring functionality. The test starts a program of artificial access pattern, monitor the access pattern using DAMON, and check if DAMON finds expected amount of hot data region (working set size) with only acceptable error rate. Note that the acceptable error rate is set with only naive assumptions and small number of tests. Hence failures of the test may not always mean DAMON is broken. Rather than that, those could be a signal to better understand the real accuracy level of DAMON in wider environments. Based on further finding, we could optimize DAMON or adjust the expectation of the test. Link: https://lkml.kernel.org/r/20231212194810.54457-5-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-20selftests/damon/_damon_sysfs: implement updat_schemes_tried_bytes commandSeongJae Park
Implement update_schemes_tried_bytes command of DAMON sysfs interface in _damon_sysfs.py. It is not only making the update, but also read the updated value from the sysfs interface and store it in the Kdamond python objects so that the user of the module can easily get the value. Link: https://lkml.kernel.org/r/20231212194810.54457-4-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-20selftests/damon/_damon_sysfs: implement kdamonds start functionSeongJae Park
Extend the tests-writing-purpose DAMON sysfs control module to support the kdamonds start functionality. Link: https://lkml.kernel.org/r/20231212194810.54457-3-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-20selftests/damon: implement a python module for test-purpose DAMON sysfs controlsSeongJae Park
Patch series "selftests/damon: add Python-written DAMON functionality tests", v2. DAMON exports most of its functionality via its sysfs interface. Hence most DAMON functionality tests could be implemented using the interface. However, because the interfaces require simple but multiple operations for many controls, writing all such tests from the scratch could be repetitive and time consuming. Implement a minimum DAMON sysfs control module, and a couple of DAMON functionality tests using the control module. The first test is for ensuring minimum accuracy of data access monitoring, and the second test is for finding if a previously found and fixed bug is introduced again. Note that the DAMON sysfs control module is only for avoiding duplicating code in tests. For convenient and general control of DAMON, users should use DAMON user-space tools that developed for the purpose, such as damo[1]. [1] https://github.com/damonitor/damo Patches Sequence ---------------- This patchset is constructed with five patches. The first three patches implement a Python-written test implementation-purpose DAMON sysfs control module. The implementation is incrementally done in the sequence of the basic data structure (first patch) first, kdamonds start command (second patch) next, and finally DAMOS tried bytes update command (third patch). Then two patches for implementing selftests using the module follows. The fourth patch implements a basic functionality test of DAMON for working set estimation accuracy. Finally, the fifth patch implements a corner case test for a previously found bug. This patch (of 5): Implement a python module for DAMON sysfs controls. The module is aimed to be useful for writing DAMON functionality tests in future. Nonetheless, this module is only representing a subset of DAMON sysfs files. Following commits will implement more DAMON sysfs controls. Link: https://lkml.kernel.org/r/20231212194810.54457-1-sj@kernel.org Link: https://lkml.kernel.org/r/20231212194810.54457-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-20maple_tree: fix warning comparing pointer to 0Jiapeng Chong
Avoid pointer type value compared with 0 to make code clear. ./tools/testing/radix-tree/maple.c:34142:15-16: WARNING comparing pointer to 0. Link: https://lkml.kernel.org/r/20231208020450.7003-1-jiapeng.chong@linux.alibaba.com Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7696 Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Cc: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-20selftests/mm/cow: add tests for anonymous multi-size THPRyan Roberts
Add tests similar to the existing PMD-sized THP tests, but which operate on memory backed by (PTE-mapped) multi-size THP. This reuses all the existing infrastructure. If the test suite detects that multi-size THP is not supported by the kernel, the new tests are skipped. Link: https://lkml.kernel.org/r/20231207161211.2374093-11-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: John Hubbard <jhubbard@nvidia.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Rientjes <rientjes@google.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Itaru Kitayama <itaru.kitayama@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yin Fengwei <fengwei.yin@intel.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-20selftests/mm/cow: generalize do_run_with_thp() helperRyan Roberts
do_run_with_thp() prepares (PMD-sized) THP memory into different states before running tests. With the introduction of multi-size THP, we would like to reuse this logic to also test those smaller THP sizes. So let's add a thpsize parameter which tells the function what size THP it should operate on. A separate commit will utilize this change to add new tests for multi-size THP, where available. Link: https://lkml.kernel.org/r/20231207161211.2374093-10-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: John Hubbard <jhubbard@nvidia.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Rientjes <rientjes@google.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Itaru Kitayama <itaru.kitayama@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yin Fengwei <fengwei.yin@intel.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-20selftests/mm/khugepaged: enlighten for multi-size THPRyan Roberts
The `collapse_max_ptes_none` test was previously failing when a THP size less than PMD-size had enabled="always". The root cause is because the test faults in 1 page less than the threshold it set for collapsing. But when THP is enabled always, we "over allocate" and therefore the threshold is passed, and collapse unexpectedly succeeds. Solve this by enlightening khugepaged selftest. Add a command line option to pass in the desired THP size that should be used for all anonymous allocations. The harness will then explicitly configure a THP size as requested and modify the `collapse_max_ptes_none` test so that it faults in the threshold minus the number of pages in the configured THP size. If no command line option is provided, default to order 0, as per previous behaviour. I chose to use an order in the command line interface, since this makes the interface agnostic of base page size, making it easier to invoke from run_vmtests.sh. Link: https://lkml.kernel.org/r/20231207161211.2374093-9-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: John Hubbard <jhubbard@nvidia.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Itaru Kitayama <itaru.kitayama@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yin Fengwei <fengwei.yin@intel.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-20selftests/mm: support multi-size THP interface in thp_settingsRyan Roberts
Save and restore the new per-size hugepage enabled setting, if available on the running kernel. Since the number of per-size directories is not fixed, solve this as simply as possible by catering for a maximum number in the thp_settings struct (20). Each array index is the order. The value of THP_NEVER is changed to 0 so that all of these new settings default to THP_NEVER and the user only needs to fill in the ones they want to enable. Link: https://lkml.kernel.org/r/20231207161211.2374093-8-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: John Hubbard <jhubbard@nvidia.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Itaru Kitayama <itaru.kitayama@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yin Fengwei <fengwei.yin@intel.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-20selftests/mm: factor out thp settings managementRyan Roberts
The khugepaged test has a useful framework for save/restore/pop/push of all thp settings via the sysfs interface. This will be useful to explicitly control multi-size THP settings in other tests, so let's move it out of khugepaged and into its own thp_settings.[c|h] utility. Link: https://lkml.kernel.org/r/20231207161211.2374093-7-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Tested-by: Alistair Popple <apopple@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: John Hubbard <jhubbard@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Rientjes <rientjes@google.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Itaru Kitayama <itaru.kitayama@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yin Fengwei <fengwei.yin@intel.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-20selftests/mm/kugepaged: restore thp settings at exitRyan Roberts
Previously, the saved thp settings would be restored upon a signal or at the natural end of the test suite. But there are some tests that directly call exit() upon failure. In this case, the thp settings were not being restored, which could then influence other tests. Fix this by installing an atexit() handler to do the actual restore. The signal handler can now just call exit() and the atexit handler is invoked. Link: https://lkml.kernel.org/r/20231207161211.2374093-6-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: David Hildenbrand <david@redhat.com> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: John Hubbard <jhubbard@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Rientjes <rientjes@google.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Itaru Kitayama <itaru.kitayama@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yin Fengwei <fengwei.yin@intel.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-20sync mm-stable with mm-hotfixes-stable to pick up depended-upon changesAndrew Morton
2023-12-20selftests: secretmem: floor the memory size to the multiple of page_sizeMuhammad Usama Anjum
The "locked-in-memory size" limit per process can be non-multiple of page_size. The mmap() fails if we try to allocate locked-in-memory with same size as the allowed limit if it isn't multiple of the page_size because mmap() rounds off the memory size to be allocated to next multiple of page_size. Fix this by flooring the length to be allocated with mmap() to the previous multiple of the page_size. This was getting triggered on KernelCI regularly because of different ulimit settings which wasn't multiple of the page_size. Find logs here: https://linux.kernelci.org/test/plan/id/657654bd8e81e654fae13532/ The bug in was present from the time test was first added. Link: https://lkml.kernel.org/r/20231214101931.1155586-1-usama.anjum@collabora.com Fixes: 76fe17ef588a ("secretmem: test: add basic selftest for memfd_secret(2)") Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Reported-by: "kernelci.org bot" <bot@kernelci.org> Closes: https://linux.kernelci.org/test/plan/id/657654bd8e81e654fae13532/ Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-20maple_tree: do not preallocate nodes for slot storesSidhartha Kumar
mas_preallocate() defaults to requesting 1 node for preallocation and then ,depending on the type of store, will update the request variable. There isn't a check for a slot store type, so slot stores are preallocating the default 1 node. Slot stores do not require any additional nodes, so add a check for the slot store case that will bypass node_count_gfp(). Update the tests to reflect that slot stores do not require allocations. User visible effects of this bug include increased memory usage from the unneeded node that was allocated. Link: https://lkml.kernel.org/r/20231213205058.386589-1-sidhartha.kumar@oracle.com Fixes: 0b8bb544b1a7 ("maple_tree: update mas_preallocate() testing") Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Peng Zhang <zhangpeng.00@bytedance.com> Cc: <stable@vger.kernel.org> [6.6+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-20selftests/bpf: Remove tests for zeroed-array kptrHou Tao
bpf_mem_alloc() doesn't support zero-sized allocation, so removing these tests from test_bpf_ma test. After the removal, there will no definition for bin_data_8, so remove 8 from data_sizes array and adjust the index of data_btf_ids array in all test cases accordingly. Signed-off-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/r/20231216131052.27621-3-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-20selftests: vxlan_mdb: Add MDB bulk deletion testIdo Schimmel
Add test cases to verify the behavior of the MDB bulk deletion functionality in the VXLAN driver. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Petr Machata <petrm@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-20selftests: bridge_mdb: Add MDB bulk deletion testIdo Schimmel
Add test cases to verify the behavior of the MDB bulk deletion functionality in the bridge driver. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-19selftests/bpf: Close cgrp fd before calling cleanup_cgroup_environment()Hou Tao
There is error log when htab-mem benchmark completes. The error log looks as follows: $ ./bench htab-mem -d1 Setting up benchmark 'htab-mem'... Benchmark 'htab-mem' started. ...... (cgroup_helpers.c:353: errno: Device or resource busy) umount cgroup2 Fix it by closing cgrp fd before invoking cleanup_cgroup_environment(). Signed-off-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/r/20231219135727.2661527-1-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-19selftests/bpf: add freplace of BTF-unreliable main prog testAndrii Nakryiko
Add a test validating that freplace'ing another main (entry) BPF program fails if the target BPF program doesn't have valid/expected func proto BTF. We extend fexit_bpf2bpf test to allow to specify expected log message for negative test cases (where freplace program is expected to fail to load). Acked-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231215011334.2307144-11-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-19selftests/bpf: add global subprog annotation testsAndrii Nakryiko
Add test cases to validate semantics of global subprog argument annotations: - non-null pointers; - context argument; - const dynptr passing; - packet pointers (data, metadata, end). Acked-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231215011334.2307144-10-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-19libbpf: add __arg_xxx macros for annotating global func argsAndrii Nakryiko
Add a set of __arg_xxx macros which can be used to augment BPF global subprogs/functions with extra information for use by BPF verifier. Acked-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231215011334.2307144-9-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-19bpf: reuse subprog argument parsing logic for subprog call checksAndrii Nakryiko
Remove duplicated BTF parsing logic when it comes to subprog call check. Instead, use (potentially cached) results of btf_prepare_func_args() to abstract away expectations of each subprog argument in generic terms (e.g., "this is pointer to context", or "this is a pointer to memory of size X"), and then use those simple high-level argument type expectations to validate actual register states to check if they match expectations. Acked-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231215011334.2307144-6-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-19bpf: reuse btf_prepare_func_args() check for main program BTF validationAndrii Nakryiko
Instead of btf_check_subprog_arg_match(), use btf_prepare_func_args() logic to validate "trustworthiness" of main BPF program's BTF information, if it is present. We ignored results of original BTF check anyway, often times producing confusing and ominously-sounding "reg type unsupported for arg#0 function" message, which has no apparent effect on program correctness and verification process. All the -EFAULT returning sanity checks are already performed in check_btf_info_early(), so there is zero reason to have this duplication of logic between btf_check_subprog_call() and btf_check_subprog_arg_match(). Dropping btf_check_subprog_arg_match() simplifies btf_check_func_arg_match() further removing `bool processing_call` flag. One subtle bit that was done by btf_check_subprog_arg_match() was potentially marking main program's BTF as unreliable. We do this explicitly now with a dedicated simple check, preserving the original behavior, but now based on well factored btf_prepare_func_args() logic. Acked-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231215011334.2307144-3-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-19selftests/bpf: add testcase to verifier_bounds.c for BPF_JNEMenglong Dong
Add testcase for the logic that the verifier tracks the BPF_JNE for regs. The assembly function "reg_not_equal_const()" and "reg_equal_const" that we add is exactly converted from the following case: u32 a = bpf_get_prandom_u32(); u64 b = 0; a %= 8; /* the "a > 0" here will be optimized to "a != 0" */ if (a > 0) { /* now the range of a should be [1, 7] */ bpf_skb_store_bytes(skb, 0, &b, a, 0); } Signed-off-by: Menglong Dong <menglong8.dong@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231219134800.1550388-5-menglong8.dong@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-19selftests/bpf: activate the OP_NE logic in range_cond()Menglong Dong
The edge range checking for the registers is supported by the verifier now, so we can activate the extended logic in tools/testing/selftests/bpf/prog_tests/reg_bounds.c/range_cond() to test such logic. Besides, I added some cases to the "crafted_cases" array for this logic. These cases are mainly used to test the edge of the src reg and dst reg. All reg bounds testings has passed in the SLOW_TESTS mode: $ export SLOW_TESTS=1 && ./test_progs -t reg_bounds -j Summary: 65/18959832 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Menglong Dong <menglong8.dong@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231219134800.1550388-4-menglong8.dong@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-19selftests/bpf: remove reduplicated s32 casting in "crafted_cases"Menglong Dong
The "S32_MIN" is already defined with s32 casting, so there is no need to do it again. Signed-off-by: Menglong Dong <menglong8.dong@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231219134800.1550388-3-menglong8.dong@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-19Revert BPF token-related functionalityAndrii Nakryiko
This patch includes the following revert (one conflicting BPF FS patch and three token patch sets, represented by merge commits): - revert 0f5d5454c723 "Merge branch 'bpf-fs-mount-options-parsing-follow-ups'"; - revert 750e785796bb "bpf: Support uid and gid when mounting bpffs"; - revert 733763285acf "Merge branch 'bpf-token-support-in-libbpf-s-bpf-object'"; - revert c35919dcce28 "Merge branch 'bpf-token-and-bpf-fs-based-delegation'". Link: https://lore.kernel.org/bpf/CAHk-=wg7JuFYwGy=GOMbRCtOL+jwSQsdUaBsRWkDVYbxipbM5A@mail.gmail.com Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
2023-12-19selftests: add vlan hw filter testsLiu Jian
Add one basic vlan hw filter test. Signed-off-by: Liu Jian <liujian56@huawei.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-19kselftest/arm64: Don't probe the current VL for unsupported vector typesMark Brown
The vec-syscfg selftest verifies that setting the VL of the currently tested vector type does not disrupt the VL of the other vector type. To do this it records the current vector length for each type but neglects to guard this with a check for that vector type actually being supported. Add one, using a helper function which we also update all the other instances of this pattern. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20231218-kselftest-arm64-vec-syscfg-rdvl-v1-1-0ac22d47e81f@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2023-12-18Merge tag 'for-netdev' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Alexei Starovoitov says: ==================== pull-request: bpf-next 2023-12-18 This PR is larger than usual and contains changes in various parts of the kernel. The main changes are: 1) Fix kCFI bugs in BPF, from Peter Zijlstra. End result: all forms of indirect calls from BPF into kernel and from kernel into BPF work with CFI enabled. This allows BPF to work with CONFIG_FINEIBT=y. 2) Introduce BPF token object, from Andrii Nakryiko. It adds an ability to delegate a subset of BPF features from privileged daemon (e.g., systemd) through special mount options for userns-bound BPF FS to a trusted unprivileged application. The design accommodates suggestions from Christian Brauner and Paul Moore. Example: $ sudo mkdir -p /sys/fs/bpf/token $ sudo mount -t bpf bpffs /sys/fs/bpf/token \ -o delegate_cmds=prog_load:MAP_CREATE \ -o delegate_progs=kprobe \ -o delegate_attachs=xdp 3) Various verifier improvements and fixes, from Andrii Nakryiko, Andrei Matei. - Complete precision tracking support for register spills - Fix verification of possibly-zero-sized stack accesses - Fix access to uninit stack slots - Track aligned STACK_ZERO cases as imprecise spilled registers. It improves the verifier "instructions processed" metric from single digit to 50-60% for some programs. - Fix verifier retval logic 4) Support for VLAN tag in XDP hints, from Larysa Zaremba. 5) Allocate BPF trampoline via bpf_prog_pack mechanism, from Song Liu. End result: better memory utilization and lower I$ miss for calls to BPF via BPF trampoline. 6) Fix race between BPF prog accessing inner map and parallel delete, from Hou Tao. 7) Add bpf_xdp_get_xfrm_state() kfunc, from Daniel Xu. It allows BPF interact with IPSEC infra. The intent is to support software RSS (via XDP) for the upcoming ipsec pcpu work. Experiments on AWS demonstrate single tunnel pcpu ipsec reaching line rate on 100G ENA nics. 8) Expand bpf_cgrp_storage to support cgroup1 non-attach, from Yafang Shao. 9) BPF file verification via fsverity, from Song Liu. It allows BPF progs get fsverity digest. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (164 commits) bpf: Ensure precise is reset to false in __mark_reg_const_zero() selftests/bpf: Add more uprobe multi fail tests bpf: Fail uprobe multi link with negative offset selftests/bpf: Test the release of map btf s390/bpf: Fix indirect trampoline generation selftests/bpf: Temporarily disable dummy_struct_ops test on s390 x86/cfi,bpf: Fix bpf_exception_cb() signature bpf: Fix dtor CFI cfi: Add CFI_NOSEAL() x86/cfi,bpf: Fix bpf_struct_ops CFI x86/cfi,bpf: Fix bpf_callback_t CFI x86/cfi,bpf: Fix BPF JIT call cfi: Flip headers selftests/bpf: Add test for abnormal cnt during multi-kprobe attachment selftests/bpf: Don't use libbpf_get_error() in kprobe_multi_test selftests/bpf: Add test for abnormal cnt during multi-uprobe attachment bpf: Limit the number of kprobes when attaching program to multiple kprobes bpf: Limit the number of uprobes when attaching program to multiple uprobes bpf: xdp: Register generic_kfunc_set with XDP programs selftests/bpf: utilize string values for delegate_xxx mount options ... ==================== Link: https://lore.kernel.org/r/20231219000520.34178-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-18bpf: Ensure precise is reset to false in __mark_reg_const_zero()Andrii Nakryiko
It is safe to always start with imprecise SCALAR_VALUE register. Previously __mark_reg_const_zero() relied on caller to reset precise mark, but it's very error prone and we already missed it in a few places. So instead make __mark_reg_const_zero() reset precision always, as it's a safe default for SCALAR_VALUE. Explanation is basically the same as for why we are resetting (or rather not setting) precision in current state. If necessary, precision propagation will set it to precise correctly. As such, also remove a big comment about forward precision propagation in mark_reg_stack_read() and avoid unnecessarily setting precision to true after reading from STACK_ZERO stack. Again, precision propagation will correctly handle this, if that SCALAR_VALUE register will ever be needed to be precise. Reported-by: Maxim Mikityanskiy <maxtram95@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yonghong.song@linux.dev> Acked-by: Maxim Mikityanskiy <maxtram95@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20231218173601.53047-1-andrii@kernel.org
2023-12-18tools/net/ynl-gen-rst: Remove extra indentation from generated docsDonald Hunter
The output from ynl-gen-rst.py has extra indentation that causes extra <blockquote> elements to be generated in the HTML output. Reduce the indentation so that sphinx doesn't generate unnecessary <blockquote> elements. Reviewed-by: Breno Leitao <leitao@debian.org> Signed-off-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20231215093720.18774-14-donald.hunter@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-18tools/net/ynl-gen-rst: Remove bold from attribute-set headingsDonald Hunter
The generated .rst for attribute-sets currently uses a sub-sub-heading for each attribute, with the attribute name in bold. This makes attributes stand out more than the attribute-set sub-headings they are part of. Remove the bold markup from attribute sub-sub-headings. Signed-off-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20231215093720.18774-13-donald.hunter@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-18tools/net/ynl-gen-rst: Sort the index of generated netlink specsDonald Hunter
The index of netlink specs was being generated unsorted. Sort the output before generating the index entries. Reviewed-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Breno Leitao <leitao@debian.org> Signed-off-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20231215093720.18774-12-donald.hunter@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-18tools/net/ynl-gen-rst: Add sub-messages to generated docsDonald Hunter
Add a section for sub-messages to the generated .rst files. Reviewed-by: Breno Leitao <leitao@debian.org> Signed-off-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20231215093720.18774-11-donald.hunter@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-18tools/net/ynl: Add binary and pad support to structs for tcDonald Hunter
The tc netlink-raw family needs binary and pad types for several qopt C structs. Add support for them to ynl. Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20231215093720.18774-6-donald.hunter@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-18tools/net/ynl: Add 'sub-message' attribute decoding to ynlDonald Hunter
Implement the 'sub-message' attribute type in ynl. Encode support is not yet implemented. Support for sub-message selectors at a different nest level from the key attribute is not yet supported. Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20231215093720.18774-5-donald.hunter@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-16 02:59:21 +0000