| Age | Commit message (Collapse) | Author |
|---|
|
do_run_with_thp() prepares (PMD-sized) THP memory into different states
before running tests. With the introduction of multi-size THP, we would
like to reuse this logic to also test those smaller THP sizes. So let's
add a thpsize parameter which tells the function what size THP it should
operate on.
A separate commit will utilize this change to add new tests for multi-size
THP, where available.
Link: https://lkml.kernel.org/r/20231207161211.2374093-10-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Itaru Kitayama <itaru.kitayama@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The `collapse_max_ptes_none` test was previously failing when a THP size
less than PMD-size had enabled="always". The root cause is because the
test faults in 1 page less than the threshold it set for collapsing. But
when THP is enabled always, we "over allocate" and therefore the threshold
is passed, and collapse unexpectedly succeeds.
Solve this by enlightening khugepaged selftest. Add a command line option
to pass in the desired THP size that should be used for all anonymous
allocations. The harness will then explicitly configure a THP size as
requested and modify the `collapse_max_ptes_none` test so that it faults
in the threshold minus the number of pages in the configured THP size. If
no command line option is provided, default to order 0, as per previous
behaviour.
I chose to use an order in the command line interface, since this makes
the interface agnostic of base page size, making it easier to invoke from
run_vmtests.sh.
Link: https://lkml.kernel.org/r/20231207161211.2374093-9-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Itaru Kitayama <itaru.kitayama@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Save and restore the new per-size hugepage enabled setting, if available
on the running kernel.
Since the number of per-size directories is not fixed, solve this as
simply as possible by catering for a maximum number in the thp_settings
struct (20). Each array index is the order. The value of THP_NEVER is
changed to 0 so that all of these new settings default to THP_NEVER and
the user only needs to fill in the ones they want to enable.
Link: https://lkml.kernel.org/r/20231207161211.2374093-8-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Itaru Kitayama <itaru.kitayama@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The khugepaged test has a useful framework for save/restore/pop/push of
all thp settings via the sysfs interface. This will be useful to
explicitly control multi-size THP settings in other tests, so let's move
it out of khugepaged and into its own thp_settings.[c|h] utility.
Link: https://lkml.kernel.org/r/20231207161211.2374093-7-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Tested-by: Alistair Popple <apopple@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Itaru Kitayama <itaru.kitayama@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Previously, the saved thp settings would be restored upon a signal or at
the natural end of the test suite. But there are some tests that directly
call exit() upon failure. In this case, the thp settings were not being
restored, which could then influence other tests.
Fix this by installing an atexit() handler to do the actual restore. The
signal handler can now just call exit() and the atexit handler is invoked.
Link: https://lkml.kernel.org/r/20231207161211.2374093-6-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Itaru Kitayama <itaru.kitayama@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
|
|
The "locked-in-memory size" limit per process can be non-multiple of
page_size. The mmap() fails if we try to allocate locked-in-memory with
same size as the allowed limit if it isn't multiple of the page_size
because mmap() rounds off the memory size to be allocated to next multiple
of page_size.
Fix this by flooring the length to be allocated with mmap() to the
previous multiple of the page_size.
This was getting triggered on KernelCI regularly because of different
ulimit settings which wasn't multiple of the page_size. Find logs
here: https://linux.kernelci.org/test/plan/id/657654bd8e81e654fae13532/
The bug in was present from the time test was first added.
Link: https://lkml.kernel.org/r/20231214101931.1155586-1-usama.anjum@collabora.com
Fixes: 76fe17ef588a ("secretmem: test: add basic selftest for memfd_secret(2)")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Closes: https://linux.kernelci.org/test/plan/id/657654bd8e81e654fae13532/
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
mas_preallocate() defaults to requesting 1 node for preallocation and then
,depending on the type of store, will update the request variable. There
isn't a check for a slot store type, so slot stores are preallocating the
default 1 node. Slot stores do not require any additional nodes, so add a
check for the slot store case that will bypass node_count_gfp(). Update
the tests to reflect that slot stores do not require allocations.
User visible effects of this bug include increased memory usage from the
unneeded node that was allocated.
Link: https://lkml.kernel.org/r/20231213205058.386589-1-sidhartha.kumar@oracle.com
Fixes: 0b8bb544b1a7 ("maple_tree: update mas_preallocate() testing")
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: <stable@vger.kernel.org> [6.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add one basic vlan hw filter test.
Signed-off-by: Liu Jian <liujian56@huawei.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The vec-syscfg selftest verifies that setting the VL of the currently
tested vector type does not disrupt the VL of the other vector type. To do
this it records the current vector length for each type but neglects to
guard this with a check for that vector type actually being supported. Add
one, using a helper function which we also update all the other instances
of this pattern.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231218-kselftest-arm64-vec-syscfg-rdvl-v1-1-0ac22d47e81f@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add test for parsing attributes to kunit_tool_test.py. Test checks
attributes are parsed and saved in the test logs.
This test also checks that the attributes have not interfered with the
parsing of other test information, specifically the suite header as
the test plan was being incorrectely parsed.
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Add parsing of attributes as diagnostic data. Fixes issue with test plan
being parsed incorrectly as diagnostic data when located after
suite-level attributes.
Note that if there does not exist a test plan line, the diagnostic lines
between the suite header and the first result will be saved in the suite
log rather than the first test case log.
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
A statement used %d print formatter where %s should have
been used. The same has been fixed in this commit.
Signed-off-by: Ghanshyam Agrawal <ghanshyam1898@gmail.com>
Link: 5aaf9efffc57 ("kselftest: alsa: Add simplistic test for ALSA mixer controls kselftest")
Link: https://lore.kernel.org/r/20231217080019.1063476-1-ghanshyam1898@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
MPC backups tests will skip unexpected sometimes (For example, when
compiling kernel with an older version of gcc, such as gcc-8), since
static functions like mptcp_subflow_send_ack also be listed in
/proc/kallsyms, with a 't' in front of it, not 'T' ('T' is for a global
function):
> grep "mptcp_subflow_send_ack" /proc/kallsyms
0000000000000000 T __pfx___mptcp_subflow_send_ack
0000000000000000 T __mptcp_subflow_send_ack
0000000000000000 t __pfx_mptcp_subflow_send_ack
0000000000000000 t mptcp_subflow_send_ack
In this case, mptcp_lib_kallsyms_doesnt_have "mptcp_subflow_send_ack$"
will be false, MPC backups tests will skip. This is not what we expected.
The correct logic here should be: if mptcp_subflow_send_ack is not a
global function in /proc/kallsyms, do these MPC backups tests. So a 'T'
must be added in front of mptcp_subflow_send_ack.
Fixes: 632978f0a961 ("selftests: mptcp: join: skip MPC backups tests if not supported")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <geliang.tang@linux.dev>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL (Compute Express Link) fixes from Dan Williams:
"A collection of CXL fixes.
The touch outside of drivers/cxl/ is for a helper that allocates
physical address space. Device hotplug tests showed that the driver
failed to utilize (skipped over) valid capacity when allocating a new
memory region. Outside of that, new tests uncovered a small crop of
lockdep reports.
There is also some miscellaneous error path and leak fixups that are
not urgent, but useful to cleanup now.
- Fix alloc_free_mem_region()'s scan for address space, prevent false
negative out-of-space events
- Fix sleeping lock acquisition from CXL trace event (atomic context)
- Fix put_device() like for the new CXL PMU driver
- Fix wrong pointer freed on error path
- Fixup several lockdep reports (missing lock hold) from new
assertion in cxl_num_decoders_committed() and new tests"
* tag 'cxl-fixes-6.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/pmu: Ensure put_device on pmu devices
cxl/cdat: Free correct buffer on checksum error
cxl/hdm: Fix dpa translation locking
kernel/resource: Increment by align value in get_free_mem_region()
cxl: Add cxl_num_decoders_committed() usage to cxl_test
cxl/memdev: Hold region_rwsem during inject and clear poison ops
cxl/core: Always hold region_rwsem while reading poison lists
cxl/hdm: Fix a benign lockdep splat
|
|
This code is rarely (never?) enabled by distros, and it hasn't caught
anything in decades. Let's kill off this legacy debug code.
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"17 hotfixes. 8 are cc:stable and the other 9 pertain to post-6.6
issues"
* tag 'mm-hotfixes-stable-2023-12-15-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/mglru: reclaim offlined memcgs harder
mm/mglru: respect min_ttl_ms with memcgs
mm/mglru: try to stop at high watermarks
mm/mglru: fix underprotected page cache
mm/shmem: fix race in shmem_undo_range w/THP
Revert "selftests: error out if kernel header files are not yet built"
crash_core: fix the check for whether crashkernel is from high memory
x86, kexec: fix the wrong ifdeffery CONFIG_KEXEC
sh, kexec: fix the incorrect ifdeffery and dependency of CONFIG_KEXEC
mips, kexec: fix the incorrect ifdeffery and dependency of CONFIG_KEXEC
m68k, kexec: fix the incorrect ifdeffery and build dependency of CONFIG_KEXEC
loongarch, kexec: change dependency of object files
mm/damon/core: make damon_start() waits until kdamond_fn() starts
selftests/mm: cow: print ksft header before printing anything else
mm: fix VMA heap bounds checking
riscv: fix VMALLOC_START definition
kexec: drop dependency on ARCH_SUPPORTS_KEXEC from CRASH_DUMP
|
|
Initial selftest for the new statmount() and listmount() syscalls.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://lore.kernel.org/r/20231213161104.403171-1-mszeredi@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add test to sockmap_basic to ensure af_unix sockets that are not connected
can not be added to the map. Ensure we keep DGRAM sockets working however
as these will not be connected typically.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20231201180139.328529-3-john.fastabend@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
When we dynamically generate a name for a configuration in get-reg-list
we use strcat() to append to a buffer allocated using malloc() but we
never initialise that buffer. Since malloc() offers no guarantees
regarding the contents of the memory it returns this can lead to us
corrupting, and likely overflowing, the buffer:
vregs: PASS
vregs+pmu: PASS
sve: PASS
sve+pmu: PASS
vregs+pauth_address+pauth_generic: PASS
X?vr+gspauth_addre+spauth_generi+pmu: PASS
The bug is that strcat() should have been strcpy(), and that replacement
would be enough to fix it, but there are other things in the function
that leave something to be desired. In particular, an (incorrectly)
empty config would cause an out of bounds access to c->name[-1].
Since the strcpy() call relies on c->name[0..len-1] being initialized,
enforce that invariant throughout the function.
Fixes: 2f9ace5d4557 ("KVM: arm64: selftests: get-reg-list: Introduce vcpu configs")
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Co-developed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Message-Id: <20231211-kvm-get-reg-list-str-init-v3-1-6554c71c77b1@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Consistently testing system parameter access is a bit difficult by
nature -- the set of parameters available depends on the model and
system configuration, and updating a parameter should be considered a
destructive operation reserved for the admin.
So we validate some of the error paths and retrieve the SPLPAR
characteristics string, but not much else.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231212-papr-sys_rtas-vs-lockdown-v6-13-e9eafd0c8c6c@linux.ibm.com
|
|
Add selftests for /dev/papr-vpd, exercising the common expected use
cases:
* Retrieve all VPD by passing an empty location code.
* Retrieve the "system VPD" by passing a location code derived from DT
root node properties, as done by the vpdupdate command.
The tests also verify that certain intended properties of the driver
hold:
* Passing an unterminated location code to PAPR_VPD_CREATE_HANDLE gets
EINVAL.
* Passing a NULL location code pointer to PAPR_VPD_CREATE_HANDLE gets
EFAULT.
* Closing the device node without first issuing a
PAPR_VPD_CREATE_HANDLE command to it succeeds.
* Releasing a handle without first consuming any data from it
succeeds.
* Re-reading the contents of a handle returns the same data as the
first time.
Some minimal validation of the returned data is performed.
The tests are skipped on systems where the papr-vpd driver does not
initialize, making this useful only on PowerVM LPARs at this point.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231212-papr-sys_rtas-vs-lockdown-v6-12-e9eafd0c8c6c@linux.ibm.com
|
|
print_reg() will print everything it knows when it encounters
a register ID it's unfamiliar with in the default cases of its
decoding switches. Fix several issues with these (until now,
never tested) paths; missing newlines in printfs, missing
complement operator in mask, and missing return in order to
avoid continuing to decode.
Fixes: 62d0c458f828 ("KVM: riscv: selftests: get-reg-list print_reg should never fail")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Haibo Xu <haibo1.xu@intel.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
There is a selftest that checks if FPRs are corrupted across a fork, aka
clone. It was added as part of the series that optimised the clone path
to save the parent's FP state without "giving up" (turning off FP).
See commit 8792468da5e1 ("powerpc: Add the ability to save FPU without
giving it up").
The test encodes the assumption that FPRs 0-13 are volatile across the
syscall, by only checking the volatile FPRs are not changed by the fork.
There was also a comment in the fpu_preempt test alluding to that:
The check_fpu function in asm only checks the non volatile registers
as it is reused from the syscall test
It is true that the function call ABI treats f0-f13 as volatile,
however the syscall ABI has since been documented as *not* treating those
registers as volatile. See commit 7b8845a2a2ec ("powerpc/64: Document
the syscall ABI").
So change the test to check all FPRs are not corrupted by the syscall.
Note that this currently fails, because save_fpu() etc. do not restore
f0/vsr0.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231128132748.1990179-5-mpe@ellerman.id.au
|
|
The FPU preempt test only runs for 20 seconds, which is not particularly
long. Run it for 60 seconds to increase the chance of detecting
corruption.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231128132748.1990179-4-mpe@ellerman.id.au
|
|
The fpu_preempt test randomly initialises an array of doubles to try and
detect FPU register corruption.
However the values it generates do not occupy the full range of values
possible in the 64-bit double, meaning some partial register corruption
could go undetected.
Without getting too carried away, add some better initialisation to
generate values that occupy more bits.
Sample values before:
f0 902677510 (raw 0x41cae6e203000000)
f1 325217596 (raw 0x41b3626d3c000000)
f2 1856578300 (raw 0x41dbaa48bf000000)
f3 1247189984 (raw 0x41d295a6f8000000)
And after:
f0 1.1078153481413311e-09 (raw 0x3e13083932805cc2)
f1 1.0576648474801922e+17 (raw 0x43777c20eb88c261)
f2 -6.6245033413594075e-10 (raw 0xbe06c2f989facae9)
f3 3.0085988827156291e+18 (raw 0x43c4e0585f2df37b)
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231128132748.1990179-3-mpe@ellerman.id.au
|
|
There's a selftest that checks FPRs aren't corrupted by preemption, or
just process scheduling. However it only checks the non-volatile FPRs,
meaning corruption of the volatile FPRs could go undetected.
The check_fpu function it calls is used by several other tests, so for
now add a new routine to check all the FPRs. Increase the size of the
array of FPRs to 32, and initialise them all with random values.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231128132748.1990179-2-mpe@ellerman.id.au
|
|
The FPU & VMX preemption tests do not check for errors returned by the
low-level asm routines, preempt_fpu() / preempt_vsx() respectively.
That means any register corruption detected by the asm routines does not
result in a test failure.
Fix it by returning the return value of the asm routines from the
pthread child routines.
Fixes: e5ab8be68e44 ("selftests/powerpc: Test preservation of FPU and VMX regs across preemption")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231128132748.1990179-1-mpe@ellerman.id.au
|
|
This reverts commit 9fc96c7c19df ("selftests: error out if kernel header
files are not yet built").
It turns out that requiring the kernel headers to be built as a
prerequisite to building selftests, does not work in many cases. For
example, Peter Zijlstra writes:
"My biggest beef with the whole thing is that I simply do not want to use
'make headers', it doesn't work for me.
I have a ton of output directories and I don't care to build tools into
the output dirs, in fact some of them flat out refuse to work that way
(bpf comes to mind)." [1]
Therefore, stop erroring out on the selftests build. Additional patches
will be required in order to change over to not requiring the kernel
headers.
[1] https://lore.kernel.org/20231208221007.GO28727@noisy.programming.kicks-ass.net
Link: https://lkml.kernel.org/r/20231209020144.244759-1-jhubbard@nvidia.com
Fixes: 9fc96c7c19df ("selftests: error out if kernel header files are not yet built")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Marcos Paulo de Souza <mpdesouza@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Doing a ksft_print_msg() before the ksft_print_header() seems to confuse
the ksft framework in a strange way: running the test on the cmdline
results in the expected output.
But piping the output somewhere else, results in some odd output,
whereby we repeatedly get the same info printed:
# [INFO] detected THP size: 2048 KiB
# [INFO] detected hugetlb page size: 2048 KiB
# [INFO] detected hugetlb page size: 1048576 KiB
# [INFO] huge zeropage is enabled
TAP version 13
1..190
# [INFO] Anonymous memory tests in private mappings
# [RUN] Basic COW after fork() ... with base page
# [INFO] detected THP size: 2048 KiB
# [INFO] detected hugetlb page size: 2048 KiB
# [INFO] detected hugetlb page size: 1048576 KiB
# [INFO] huge zeropage is enabled
TAP version 13
1..190
# [INFO] Anonymous memory tests in private mappings
# [RUN] Basic COW after fork() ... with base page
ok 1 No leak from parent into child
# [RUN] Basic COW after fork() ... with swapped out base page
# [INFO] detected THP size: 2048 KiB
# [INFO] detected hugetlb page size: 2048 KiB
# [INFO] detected hugetlb page size: 1048576 KiB
# [INFO] huge zeropage is enabled
Doing the ksft_print_header() first seems to resolve that and gives us
the output we expect:
TAP version 13
# [INFO] detected THP size: 2048 KiB
# [INFO] detected hugetlb page size: 2048 KiB
# [INFO] detected hugetlb page size: 1048576 KiB
# [INFO] huge zeropage is enabled
1..190
# [INFO] Anonymous memory tests in private mappings
# [RUN] Basic COW after fork() ... with base page
ok 1 No leak from parent into child
# [RUN] Basic COW after fork() ... with swapped out base page
ok 2 No leak from parent into child
# [RUN] Basic COW after fork() ... with THP
ok 3 No leak from parent into child
# [RUN] Basic COW after fork() ... with swapped-out THP
ok 4 No leak from parent into child
# [RUN] Basic COW after fork() ... with PTE-mapped THP
ok 5 No leak from parent into child
Link: https://lkml.kernel.org/r/20231206103558.38040-1-david@redhat.com
Fixes: f4b5fd6946e2 ("selftests/vm: anon_cow: THP tests")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Nico Pache <npache@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add DAMON selftests for testing creation/existence of quota goals
directories and files, and simple valid input writes.
Link: https://lkml.kernel.org/r/20231130023652.50284-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: David Gow <davidgow@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
ksm functional test is already being run. Remove the duplicate call to
./ksm_functional_tests.
Link: https://lkml.kernel.org/r/20231129221140.614713-1-npache@redhat.com
Fixes: 93fb70aa5904 ("selftests/vm: add KSM unmerge tests")
Signed-off-by: Nico Pache <npache@redhat.com>
Acked-by: Joel Savitz <jsavitz@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The memcg-zswap self test is updated to adjust to the behavior change
implemented by commit 87730b165089 ("zswap: make shrinking memcg-aware"),
where zswap performs writeback for specific memcg.
Link: https://lkml.kernel.org/r/20231130194023.4102148-6-nphamcs@gmail.com
Signed-off-by: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: Chris Li <chrisl@kernel.org> (Google)
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now that the status of the maple state is outside of the node, the
mas_searchable() function can be dropped for easier open-coding of what is
going on.
Link: https://lkml.kernel.org/r/20231101171629.3612299-10-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The maple tree node is overloaded to keep status as well as the active
node. This, unfortunately, results in a re-walk on underflow or overflow.
Since the maple state has room, the status can be placed in its own enum
in the structure. Once an underflow/overflow is detected, certain modes
can restore the status to active and others may need to re-walk just that
one node to see the entry.
The status being an enum has the benefit of detecting unhandled status in
switch statements.
[Liam.Howlett@oracle.com: fix comments about MAS_*]
Link: https://lkml.kernel.org/r/20231106154124.614247-1-Liam.Howlett@oracle.com
[Liam.Howlett@oracle.com: update forking to separate maple state and node]
Link: https://lkml.kernel.org/r/20231106154551.615042-1-Liam.Howlett@oracle.com
[Liam.Howlett@oracle.com: fix mas_prev() state separation code]
Link: https://lkml.kernel.org/r/20231207193319.4025462-1-Liam.Howlett@oracle.com
Link: https://lkml.kernel.org/r/20231101171629.3612299-9-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Analysis of the mas_for_each() iteration showed that there is a
significant time spent finding the end of a node. This time can be
greatly reduced if the end of the node is cached in the maple state. Care
must be taken to update & invalidate as necessary.
Link: https://lkml.kernel.org/r/20231101171629.3612299-5-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
__mas_set_range() was created to shortcut resetting the maple state and a
debug check was added to the caller (the vma iterator) to ensure the
internal maple state remains safe to use. Move the debug check from the
vma iterator into the maple tree itself so other users do not incorrectly
use the advanced maple state modification.
Fallout from this change include a large amount of debug setup needed to
be moved to earlier in the header, and the maple_tree.h radix-tree test
code needed to move the inclusion of the header to after the atomic
define. None of those changes have functional changes.
Link: https://lkml.kernel.org/r/20231101171629.3612299-4-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Building the KVM selftests from the main selftests Makefile (as opposed
to the kvm subdirectory) doesn't work as OUTPUT is set, forcing the
generated header to spill into the selftests directory. Additionally,
relative paths do not work when building outside of the srctree, as the
canonical selftests path is replaced with 'kselftest' in the output.
Work around both of these issues by explicitly overriding OUTPUT on the
submake cmdline. Move the whole fragment below the point lib.mk gets
included such that $(abs_objdir) is available.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231212070431.145544-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Add a synthetic feature flag specifically for first generation Zen
machines. There's need to have a generic flag for all Zen generations so
make X86_FEATURE_ZEN be that flag.
Fixes: 30fa92832f40 ("x86/CPU/AMD: Add ZenX generations flags")
Suggested-by: Brian Gerst <brgerst@gmail.com>
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/dc3835e3-0731-4230-bbb9-336bbe3d042b@amd.com
|
|
Now that ARMV8_PMU_PMCR_N is made with GENMASK, update usages to treat
it as a pre-shifted mask.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20231211161331.1277825-9-james.clark@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
qemu-user does has its own implementation of coredumping.
That implementation does not respect the call to
prctl(PR_SET_DUMPABLE, 0) in run_protection().
This leads to a coredump for every test run under qemu-user.
Use also setrlimit() to inhibit coredump creation which is respected by
qemu-user.
Link: https://lore.kernel.org/qemu-devel/20231115-qemu-user-dumpable-v1-2-edbe7f0fbb02@t-8ch.de/
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/lkml/20231123-nolibc-rlimit-v1-3-a428b131de2a@weissschuh.net/
Acked-by: Willy Tarreau <w@1wt.eu>
|
|
The implementation uses the prlimit64 systemcall as that is available on
all architectures.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/lkml/20231123-nolibc-rlimit-v1-2-a428b131de2a@weissschuh.net/
Acked-by: Willy Tarreau <w@1wt.eu>
|
|
A future commit will include linux/resource.h, which will conflict with
the private definition of struct rusage in nolibc.
Avoid the conflict by dropping the private definition and use the one
from the UAPI headers.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/lkml/20231123-nolibc-rlimit-v1-1-a428b131de2a@weissschuh.net/
Acked-by: Willy Tarreau <w@1wt.eu>
|
|
The same testcase is present on the line above.
Fixes: b4844fa0bdb4 ("selftests/nolibc: implement a few tests for various syscalls")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
__attribute__(format(printf)) can also be used for functions that take a
va_list argument.
As per the GCC docs:
For functions where the arguments are not available to be checked
(such as vprintf), specify the third parameter as zero.
Link: https://gcc.gnu.org/onlinedocs/gcc/Common-Function-Attributes.html
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
Move the check of the existing length into the function so it can't be
forgotten by the caller.
Also hardcode the padding character as only spaces are ever used.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
MIPS requires some extra instructions to set up the $gp register for the
with a pointer to the global data area.
This isn't needed for non-PIC builds, but this patch enables the code
unconditionally to prevent bitrot.
Also enable PIC in one of the test configurations for ongoing
validation.
Link: https://lore.kernel.org/r/20231108-nolibc-pic-v2-1-4fb0d6284757@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
qemu-user is faster than a full system test.
Link: https://lore.kernel.org/r/20770915-nolibc-run-user-v1-2-3caec61726dc@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
While ppc64le shares the same executable with regular ppc64 the user
variant needs has a dedicated executable.
Introduce a new QEMU_ARCH_USER Makefile variable to accommodate that.
Fixes: 17362f3d0bd3 ("selftests/nolibc: use qemu-system-ppc64 for ppc64le")
Link: https://lore.kernel.org/r/20770915-nolibc-run-user-v1-1-3caec61726dc@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
Center-align all possible status reports.
Before OK and FAIL were center-aligned in relation to each other but
SKIPPED and FAILED would be left-aligned.
Before:
7 environ_addr = <0x7fffef3e7c50> [OK]
8 environ_envp = <0x7fffef3e7c58> [FAIL]
9 environ_auxv [SKIPPED]
10 environ_total [SKIPPED]
11 environ_HOME = <0x7fffef3e99bd> [OK]
12 auxv_addr [SKIPPED]
13 auxv_AT_UID = 1000 [OK]
After:
7 environ_addr = <0x7ffff13b00a0> [OK]
8 environ_envp = <0x7ffff13b00a8> [FAIL]
9 environ_auxv [SKIPPED]
10 environ_total [SKIPPED]
11 environ_HOME = <0x7ffff13b19bd> [OK]
12 auxv_addr [SKIPPED]
13 auxv_AT_UID = 1000 [OK]
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
