summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2023-11-23Merge tag 'net-6.7-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf. Current release - regressions: - Revert "net: r8169: Disable multicast filter for RTL8168H and RTL8107E" - kselftest: rtnetlink: fix ip route command typo Current release - new code bugs: - s390/ism: make sure ism driver implies smc protocol in kconfig - two build fixes for tools/net Previous releases - regressions: - rxrpc: couple of ACK/PING/RTT handling fixes Previous releases - always broken: - bpf: verify bpf_loop() callbacks as if they are called unknown number of times - improve stability of auto-bonding with Hyper-V - account BPF-neigh-redirected traffic in interface statistics Misc: - net: fill in some more MODULE_DESCRIPTION()s" * tag 'net-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits) tools: ynl: fix duplicate op name in devlink tools: ynl: fix header path for nfsd net: ipa: fix one GSI register field width tls: fix NULL deref on tls_sw_splice_eof() with empty record net: axienet: Fix check for partial TX checksum vsock/test: fix SEQPACKET message bounds test i40e: Fix adding unsupported cloud filters ice: restore timestamp configuration after device reset ice: unify logic for programming PFINT_TSYN_MSK ice: remove ptp_tx ring parameter flag amd-xgbe: propagate the correct speed and duplex status amd-xgbe: handle the corner-case during tx completion amd-xgbe: handle corner-case during sfp hotplug net: veth: fix ethtool stats reporting octeontx2-pf: Fix ntuple rule creation to direct packet to VF with higher Rx queue than its PF net: usb: qmi_wwan: claim interface 4 for ZTE MF290 Revert "net: r8169: Disable multicast filter for RTL8168H and RTL8107E" net/smc: avoid data corruption caused by decline nfc: virtual_ncidev: Add variable to check if ndev is running dpll: Fix potential msg memleak when genlmsg_put_reply failed ...
2023-11-23tools: ynl: fix duplicate op name in devlinkJakub Kicinski
We don't support CRUD-inspired message types in YNL too well. One aspect that currently trips us up is the fact that single message ID can be used in multiple commands (as the response). This leads to duplicate entries in the id-to-string tables: devlink-user.c:19:34: warning: initialized field overwritten [-Woverride-init] 19 | [DEVLINK_CMD_PORT_NEW] = "port-new", | ^~~~~~~~~~ devlink-user.c:19:34: note: (near initialization for ‘devlink_op_strmap[7]’) Fixes tag points at where the code was generated, the "real" problem is that the code generator does not support CRUD. Fixes: f2f9dd164db0 ("netlink: specs: devlink: add the remaining command to generate complete split_ops") Link: https://lore.kernel.org/r/20231123030558.1611831-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-23tools: ynl: fix header path for nfsdJakub Kicinski
The makefile dependency is trying to include the wrong header: <command-line>: fatal error: ../../../../include/uapi//linux/nfsd.h: No such file or directory The guard also looks wrong. Fixes: f14122b2c2ac ("tools: ynl: Add source files for nfsd netlink protocol") Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Link: https://lore.kernel.org/r/20231123030624.1611925-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-23vsock/test: fix SEQPACKET message bounds testArseniy Krasnov
Tune message length calculation to make this test work on machines where 'getpagesize()' returns >32KB. Now maximum message length is not hardcoded (on machines above it was smaller than 'getpagesize()' return value, thus we get negative value and test fails), but calculated at runtime and always bigger than 'getpagesize()' result. Reproduced on aarch64 with 64KB page size. Fixes: 5c338112e48a ("test/vsock: rework message bounds test") Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reported-by: Bogdan Marcynkov <bmarcynk@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20231121211642.163474-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-23kselftest/arm64: Fix output formatting for za-forkMark Brown
The za-fork test does not output a newline when reporting the result of the one test it runs, causing the counts printed by kselftest to be included in the test name. Add the newline. Fixes: 266679ffd867 ("kselftest/arm64: Convert za-fork to use kselftest.h") Cc: <stable@vger.kernel.org> # 6.4.x Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20231116-arm64-fix-za-fork-output-v1-1-42c03d4f5759@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2023-11-22tools: Disable __packed attribute compiler warning due to -Werror=attributesArnaldo Carvalho de Melo
Noticed on several perf tools cross build test containers: [perfbuilder@five ~]$ grep FAIL ~/dm.log/summary 19 10.18 debian:experimental-x-mips : FAIL gcc version 12.3.0 (Debian 12.3.0-6) 20 11.21 debian:experimental-x-mips64 : FAIL gcc version 12.3.0 (Debian 12.3.0-6) 21 11.30 debian:experimental-x-mipsel : FAIL gcc version 12.3.0 (Debian 12.3.0-6) 37 12.07 ubuntu:18.04-x-arm : FAIL gcc version 7.5.0 (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 42 11.91 ubuntu:18.04-x-riscv64 : FAIL gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04) 44 13.17 ubuntu:18.04-x-sh4 : FAIL gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04) 45 12.09 ubuntu:18.04-x-sparc64 : FAIL gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04) [perfbuilder@five ~]$ In file included from util/intel-pt-decoder/intel-pt-pkt-decoder.c:10: /tmp/perf-6.6.0-rc1/tools/include/asm-generic/unaligned.h: In function 'get_unaligned_le16': /tmp/perf-6.6.0-rc1/tools/include/asm-generic/unaligned.h:13:29: error: packed attribute causes inefficient alignment for 'x' [-Werror=attributes] 13 | const struct { type x; } __packed *__pptr = (typeof(__pptr))(ptr); \ | ^ /tmp/perf-6.6.0-rc1/tools/include/asm-generic/unaligned.h:27:28: note: in expansion of macro '__get_unaligned_t' 27 | return le16_to_cpu(__get_unaligned_t(__le16, p)); | ^~~~~~~~~~~~~~~~~ This comes from the kernel, where the -Wattributes and -Wpacked isn't used, -Wpacked is already disabled, do it for the attributes as well. Fixes: a91c987254651443 ("perf tools: Add get_unaligned_leNN()") Suggested-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/lkml/7c5b626c-1de9-4c12-a781-e44985b4a797@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-11-22perf build: Ensure sysreg-defs Makefile respects output dirOliver Upton
Currently the sysreg-defs are written out to the source tree unconditionally, ignoring the specified output directory. Correct the build rule to emit the header to the output directory. Opportunistically reorganize the rules to avoid interleaving with the set of beauty make rules. Reported-by: Ian Rogers <irogers@google.com> Signed-off-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20231121192956.919380-3-oliver.upton@linux.dev Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-11-22tools perf: Add arm64 sysreg files to MANIFESTOliver Upton
Ian pointed out that source tarballs are incomplete as of commit e2bdd172e665 ("perf build: Generate arm64's sysreg-defs.h and add to include path"), since the source files needed from the kernel tree do not appear in the manifest. Add them. Reported-by: Ian Rogers <irogers@google.com> Fixes: e2bdd172e665 ("perf build: Generate arm64's sysreg-defs.h and add to include path") Signed-off-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20231121192956.919380-2-oliver.upton@linux.dev Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-11-22tools/perf: Update tools's copy of mips syscall tableNamhyung Kim
tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: linux-mips@vger.kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20231121225650.390246-14-namhyung@kernel.org
2023-11-22tools/perf: Update tools's copy of s390 syscall tableNamhyung Kim
tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: linux-s390@vger.kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20231121225650.390246-13-namhyung@kernel.org
2023-11-22tools/perf: Update tools's copy of powerpc syscall tableNamhyung Kim
tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20231121225650.390246-12-namhyung@kernel.org
2023-11-22tools/perf: Update tools's copy of x86 syscall tableNamhyung Kim
tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: x86@kernel.org Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20231121225650.390246-11-namhyung@kernel.org
2023-11-22tools headers: Update tools's copy of s390/asm headersNamhyung Kim
tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: linux-s390@vger.kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20231121225650.390246-10-namhyung@kernel.org
2023-11-22tools headers: Update tools's copy of arm64/asm headersNamhyung Kim
tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20231121225650.390246-9-namhyung@kernel.org
2023-11-22tools headers: Update tools's copy of x86/asm headersNamhyung Kim
tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: x86@kernel.org Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20231121225650.390246-8-namhyung@kernel.org
2023-11-22tools headers: Update tools's copy of socket.h headerNamhyung Kim
tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: netdev@vger.kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20231121225650.390246-7-namhyung@kernel.org
2023-11-22tools headers UAPI: Update tools's copy of unistd.h headerNamhyung Kim
tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-arch@vger.kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20231121225650.390246-6-namhyung@kernel.org
2023-11-22tools headers UAPI: Update tools's copy of vhost.h headerNamhyung Kim
tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: kvm@vger.kernel.org Cc: virtualization@lists.linux.dev Cc: netdev@vger.kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20231121225650.390246-5-namhyung@kernel.org
2023-11-22tools headers UAPI: Update tools's copy of mount.h headerNamhyung Kim
tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20231121225650.390246-4-namhyung@kernel.org
2023-11-22tools headers UAPI: Update tools's copy of kvm.h headerNamhyung Kim
tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: kvm@vger.kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20231121225650.390246-3-namhyung@kernel.org
2023-11-22tools headers UAPI: Update tools's copy of fscrypt.h headerNamhyung Kim
tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: Eric Biggers <ebiggers@kernel.org> Cc: "Theodore Y. Ts'o" <tytso@mit.edu> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: linux-fscrypt@vger.kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20231121225650.390246-2-namhyung@kernel.org
2023-11-22tools headers UAPI: Update tools's copy of drm headersNamhyung Kim
tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20231121225650.390246-1-namhyung@kernel.org
2023-11-22Merge tag 'hyperv-fixes-signed-20231121' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fixes from Wei Liu: - One fix for the KVP daemon (Ani Sinha) - Fix for the detection of E820_TYPE_PRAM in a Gen2 VM (Saurabh Sengar) - Micro-optimization for hv_nmi_unknown() (Uros Bizjak) * tag 'hyperv-fixes-signed-20231121' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: x86/hyperv: Use atomic_try_cmpxchg() to micro-optimize hv_nmi_unknown() x86/hyperv: Fix the detection of E820_TYPE_PRAM in a Gen2 VM hv/hv_kvp_daemon: Some small fixes for handling NM keyfiles
2023-11-21perf lock contention: Fix a build error on 32-bitYang Jihong
Fix a build error on 32-bit system: util/bpf_lock_contention.c: In function 'lock_contention_get_name': util/bpf_lock_contention.c:253:50: error: format '%lu' expects argument of type 'long unsigned int', but argument 4 has type 'u64 {aka long long unsigned int}' [-Werror=format=] snprintf(name_buf, sizeof(name_buf), "cgroup:%lu", cgrp_id); ~~^ %llu cc1: all warnings being treated as errors Fixes: d0c502e46e97 ("perf lock contention: Prepare to handle cgroups") Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: avagin@google.com Cc: daniel.diaz@linaro.org Link: https://lore.kernel.org/r/20231118024858.1567039-3-yangjihong1@huawei.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-11-21perf kwork: Fix a build error on 32-bitYang Jihong
lkft reported a build error for 32-bit system: builtin-kwork.c: In function 'top_print_work': builtin-kwork.c:1646:28: error: format '%ld' expects argument of type 'long int', but argument 3 has type 'u64' {aka 'long long unsigned int'} [-Werror=format=] 1646 | ret += printf(" %*ld ", PRINT_PID_WIDTH, work->id); | ~~~^ ~~~~~~~~ | | | | long int u64 {aka long long unsigned int} | %*lld cc1: all warnings being treated as errors make[3]: *** [/builds/linux/tools/build/Makefile.build:106: /home/tuxbuild/.cache/tuxmake/builds/1/build/builtin-kwork.o] Error 1 Fix it. Fixes: 55c40e505234 ("perf kwork top: Introduce new top utility") Reported-by: Linux Kernel Functional Testing <lkft@linaro.org> Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: avagin@google.com Cc: daniel.diaz@linaro.org Link: https://lore.kernel.org/r/20231118024858.1567039-2-yangjihong1@huawei.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-11-20selftests/bpf: check if max number of bpf_loop iterations is trackedEduard Zingerman
Check that even if bpf_loop() callback simulation does not converge to a specific state, verification could proceed via "brute force" simulation of maximal number of callback calls. Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20231121020701.26440-12-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-11-20bpf: keep track of max number of bpf_loop callback iterationsEduard Zingerman
In some cases verifier can't infer convergence of the bpf_loop() iteration. E.g. for the following program: static int cb(__u32 idx, struct num_context* ctx) { ctx->i++; return 0; } SEC("?raw_tp") int prog(void *_) { struct num_context ctx = { .i = 0 }; __u8 choice_arr[2] = { 0, 1 }; bpf_loop(2, cb, &ctx, 0); return choice_arr[ctx.i]; } Each 'cb' simulation would eventually return to 'prog' and reach 'return choice_arr[ctx.i]' statement. At which point ctx.i would be marked precise, thus forcing verifier to track multitude of separate states with {.i=0}, {.i=1}, ... at bpf_loop() callback entry. This commit allows "brute force" handling for such cases by limiting number of callback body simulations using 'umax' value of the first bpf_loop() parameter. For this, extend bpf_func_state with 'callback_depth' field. Increment this field when callback visiting state is pushed to states traversal stack. For frame #N it's 'callback_depth' field counts how many times callback with frame depth N+1 had been executed. Use bpf_func_state specifically to allow independent tracking of callback depths when multiple nested bpf_loop() calls are present. Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20231121020701.26440-11-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-11-20selftests/bpf: test widening for iterating callbacksEduard Zingerman
A test case to verify that imprecise scalars widening is applied to callback entering state, when callback call is simulated repeatedly. Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20231121020701.26440-10-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-11-20selftests/bpf: tests for iterating callbacksEduard Zingerman
A set of test cases to check behavior of callback handling logic, check if verifier catches the following situations: - program not safe on second callback iteration; - program not safe on zero callback iterations; - infinite loop inside a callback. Verify that callback logic works for bpf_loop, bpf_for_each_map_elem, bpf_user_ringbuf_drain, bpf_find_vma. Acked-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20231121020701.26440-8-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-11-20bpf: verify callbacks as if they are called unknown number of timesEduard Zingerman
Prior to this patch callbacks were handled as regular function calls, execution of callback body was modeled exactly once. This patch updates callbacks handling logic as follows: - introduces a function push_callback_call() that schedules callback body verification in env->head stack; - updates prepare_func_exit() to reschedule callback body verification upon BPF_EXIT; - as calls to bpf_*_iter_next(), calls to callback invoking functions are marked as checkpoints; - is_state_visited() is updated to stop callback based iteration when some identical parent state is found. Paths with callback function invoked zero times are now verified first, which leads to necessity to modify some selftests: - the following negative tests required adding release/unlock/drop calls to avoid previously masked unrelated error reports: - cb_refs.c:underflow_prog - exceptions_fail.c:reject_rbtree_add_throw - exceptions_fail.c:reject_with_cp_reference - the following precision tracking selftests needed change in expected log trace: - verifier_subprog_precision.c:callback_result_precise (note: r0 precision is no longer propagated inside callback and I think this is a correct behavior) - verifier_subprog_precision.c:parent_callee_saved_reg_precise_with_callback - verifier_subprog_precision.c:parent_stack_slot_precise_with_callback Reported-by: Andrew Werner <awerner32@gmail.com> Closes: https://lore.kernel.org/bpf/CA+vRuzPChFNXmouzGG+wsy=6eMcfr1mFG0F3g7rbg-sedGKW3w@mail.gmail.com/ Acked-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20231121020701.26440-7-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-11-20selftests/bpf: fix bpf_loop_bench for new callback verification schemeEduard Zingerman
This is a preparatory change. A follow-up patch "bpf: verify callbacks as if they are called unknown number of times" changes logic for callbacks handling. While previously callbacks were verified as a single function call, new scheme takes into account that callbacks could be executed unknown number of times. This has dire implications for bpf_loop_bench: SEC("fentry/" SYS_PREFIX "sys_getpgid") int benchmark(void *ctx) { for (int i = 0; i < 1000; i++) { bpf_loop(nr_loops, empty_callback, NULL, 0); __sync_add_and_fetch(&hits, nr_loops); } return 0; } W/o callbacks change verifier sees it as a 1000 calls to empty_callback(). However, with callbacks change things become exponential: - i=0: state exploring empty_callback is scheduled with i=0 (a); - i=1: state exploring empty_callback is scheduled with i=1; ... - i=999: state exploring empty_callback is scheduled with i=999; - state (a) is popped from stack; - i=1: state exploring empty_callback is scheduled with i=1; ... Avoid this issue by rewriting outer loop as bpf_loop(). Unfortunately, this adds a function call to a loop at runtime, which negatively affects performance: throughput latency before: 149.919 ± 0.168 M ops/s, 6.670 ns/op after : 137.040 ± 0.187 M ops/s, 7.297 ns/op Acked-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20231121020701.26440-4-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-11-20selftests/bpf: track string payload offset as scalar in strobemetaEduard Zingerman
This change prepares strobemeta for update in callbacks verification logic. To allow bpf_loop() verification converge when multiple callback iterations are considered: - track offset inside strobemeta_payload->payload directly as scalar value; - at each iteration make sure that remaining strobemeta_payload->payload capacity is sufficient for execution of read_{map,str}_var functions; - make sure that offset is tracked as unbound scalar between iterations, otherwise verifier won't be able infer that bpf_loop callback reaches identical states. Acked-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20231121020701.26440-3-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-11-20selftests/bpf: track tcp payload offset as scalar in xdp_synproxyEduard Zingerman
This change prepares syncookie_{tc,xdp} for update in callbakcs verification logic. To allow bpf_loop() verification converge when multiple callback itreations are considered: - track offset inside TCP payload explicitly, not as a part of the pointer; - make sure that offset does not exceed MAX_PACKET_OFF enforced by verifier; - make sure that offset is tracked as unbound scalar between iterations, otherwise verifier won't be able infer that bpf_loop callback reaches identical states. Acked-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20231121020701.26440-2-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-11-20iommufd/selftest: Fix _test_mock_dirty_bitmaps()Robin Murphy
The ASSERT_EQ() macro sneakily expands to two statements, so the loop here needs braces to ensure it captures both and actually terminates the test upon failure. Where these tests are currently failing on my arm64 machine, this reduces the number of logged lines from a rather unreasonable ~197,000 down to 10. While we're at it, we can also clean up the tautologous "count" calculations whose assertions can never fail unless mathematics and/or the C language become fundamentally broken. Fixes: a9af47e382a4 ("iommufd/selftest: Test IOMMU_HWPT_GET_DIRTY_BITMAP") Link: https://lore.kernel.org/r/90e083045243ef407dd592bb1deec89cd1f4ddf2.1700153535.git.robin.murphy@arm.com Signed-off-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Joao Martins <joao.m.martins@oracle.com> Tested-by: Joao Martins <joao.m.martins@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-11-20selftests/bpf: Add netkit to tc_redirect selftestDaniel Borkmann
Extend the existing tc_redirect selftest to also cover netkit devices for exercising the bpf_redirect_peer() code paths, so that we have both veth as well as netkit covered, all tests still pass after this change. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Stanislav Fomichev <sdf@google.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20231114004220.6495-9-daniel@iogearbox.net Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-11-20selftests/bpf: De-veth-ize the tc_redirect test caseDaniel Borkmann
No functional changes to the test case, but just renaming various functions, variables, etc, to remove veth part of their name for making it more generic and reusable later on (e.g. for netkit). Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Stanislav Fomichev <sdf@google.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20231114004220.6495-8-daniel@iogearbox.net Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-11-20PM: tools: Fix sleepgraph syntax errorDavid Woodhouse
The sleepgraph tool currently fails: File "/usr/bin/sleepgraph", line 4155 or re.match('psci: CPU(?P<cpu>[0-9]*) killed.*', msg)): ^ SyntaxError: unmatched ')' Fixes: 34ea427e01ea ("PM: tools: sleepgraph: Recognize "CPU killed" messages") Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-11-18Merge tag 'turbostat-2023.11.07' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull turbostat updates from Len Brown: - Turbostat features are now table-driven (Rui Zhang) - Add support for some new platforms (Sumeet Pawnikar, Rui Zhang) - Gracefully run in configs when CPUs are limited (Rui Zhang, Srinivas Pandruvada) - misc minor fixes [ This came in during the merge window, but sorting out the signed tag took a while, so thus the late merge - Linus ] * tag 'turbostat-2023.11.07' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (86 commits) tools/power turbostat: version 2023.11.07 tools/power/turbostat: bugfix "--show IPC" tools/power/turbostat: Add initial support for LunarLake tools/power/turbostat: Add initial support for ArrowLake tools/power/turbostat: Add initial support for GrandRidge tools/power/turbostat: Add initial support for SierraForest tools/power/turbostat: Add initial support for GraniteRapids tools/power/turbostat: Add MSR_CORE_C1_RES support for spr_features tools/power/turbostat: Move process to root cgroup tools/power/turbostat: Handle cgroup v2 cpu limitation tools/power/turbostat: Abstrct function for parsing cpu string tools/power/turbostat: Handle offlined CPUs in cpu_subset tools/power/turbostat: Obey allowed CPUs for system summary tools/power/turbostat: Obey allowed CPUs for primary thread/core detection tools/power/turbostat: Abstract several functions tools/power/turbostat: Obey allowed CPUs during startup tools/power/turbostat: Obey allowed CPUs when accessing CPU counters tools/power/turbostat: Introduce cpu_allowed_set tools/power/turbostat: Remove PC7/PC9 support on ADL/RPL tools/power/turbostat: Enable MSR_CORE_C1_RES on recent Intel client platforms ...
2023-11-17Merge tag 'mm-hotfixes-stable-2023-11-17-14-04' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "Thirteen hotfixes. Seven are cc:stable and the remainder pertain to post-6.6 issues or aren't considered suitable for backporting" * tag 'mm-hotfixes-stable-2023-11-17-14-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm: more ptep_get() conversion parisc: fix mmap_base calculation when stack grows upwards mm/damon/core.c: avoid unintentional filtering out of schemes mm: kmem: drop __GFP_NOFAIL when allocating objcg vectors mm/damon/sysfs-schemes: handle tried region directory allocation failure mm/damon/sysfs-schemes: handle tried regions sysfs directory allocation failure mm/damon/sysfs: check error from damon_sysfs_update_target() mm: fix for negative counter: nr_file_hugepages selftests/mm: add hugetlb_fault_after_madv to .gitignore selftests/mm: restore number of hugepages selftests: mm: fix some build warnings selftests: mm: skip whole test instead of failure mm/damon/sysfs: eliminate potential uninitialized variable warning
2023-11-17kselftest: rtnetlink: fix ip route command typoPaolo Abeni
The blamed commit below introduced a typo causing 'gretap' test-case failures: ./rtnetlink.sh -t kci_test_gretap -v COMMAND: ip link add name test-dummy0 type dummy COMMAND: ip link set test-dummy0 up COMMAND: ip netns add testns COMMAND: ip link help gretap 2>&1 | grep -q '^Usage:' COMMAND: ip -netns testns link add dev gretap00 type gretap seq key 102 local 172.16.1.100 remote 172.16.1.200 COMMAND: ip -netns testns addr add dev gretap00 10.1.1.100/24 COMMAND: ip -netns testns link set dev gretap00 ups Error: either "dev" is duplicate, or "ups" is a garbage. COMMAND: ip -netns testns link del gretap00 COMMAND: ip -netns testns link add dev gretap00 type gretap external COMMAND: ip -netns testns link del gretap00 FAIL: gretap Fix it by using the correct keyword. Fixes: 9c2a19f71515 ("kselftest: rtnetlink.sh: add verbose flag") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-16Merge tag 'net-6.7-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from BPF and netfilter. Current release - regressions: - core: fix undefined behavior in netdev name allocation - bpf: do not allocate percpu memory at init stage - netfilter: nf_tables: split async and sync catchall in two functions - mptcp: fix possible NULL pointer dereference on close Current release - new code bugs: - eth: ice: dpll: fix initial lock status of dpll Previous releases - regressions: - bpf: fix precision backtracking instruction iteration - af_unix: fix use-after-free in unix_stream_read_actor() - tipc: fix kernel-infoleak due to uninitialized TLV value - eth: bonding: stop the device in bond_setup_by_slave() - eth: mlx5: - fix double free of encap_header - avoid referencing skb after free-ing in drop path - eth: hns3: fix VF reset - eth: mvneta: fix calls to page_pool_get_stats Previous releases - always broken: - core: set SOCK_RCU_FREE before inserting socket into hashtable - bpf: fix control-flow graph checking in privileged mode - eth: ppp: limit MRU to 64K - eth: stmmac: avoid rx queue overrun - eth: icssg-prueth: fix error cleanup on failing initialization - eth: hns3: fix out-of-bounds access may occur when coalesce info is read via debugfs - eth: cortina: handle large frames Misc: - selftests: gso: support CONFIG_MAX_SKB_FRAGS up to 45" * tag 'net-6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (78 commits) macvlan: Don't propagate promisc change to lower dev in passthru net: sched: do not offload flows with a helper in act_ct net/mlx5e: Check return value of snprintf writing to fw_version buffer for representors net/mlx5e: Check return value of snprintf writing to fw_version buffer net/mlx5e: Reduce the size of icosq_str net/mlx5: Increase size of irq name buffer net/mlx5e: Update doorbell for port timestamping CQ before the software counter net/mlx5e: Track xmit submission to PTP WQ after populating metadata map net/mlx5e: Avoid referencing skb after free-ing in drop path of mlx5e_sq_xmit_wqe net/mlx5e: Don't modify the peer sent-to-vport rules for IPSec offload net/mlx5e: Fix pedit endianness net/mlx5e: fix double free of encap_header in update funcs net/mlx5e: fix double free of encap_header net/mlx5: Decouple PHC .adjtime and .adjphase implementations net/mlx5: DR, Allow old devices to use multi destination FTE net/mlx5: Free used cpus mask when an IRQ is released Revert "net/mlx5: DR, Supporting inline WQE when possible" bpf: Do not allocate percpu memory at init stage net: Fix undefined behavior in netdev name allocation dt-bindings: net: ethernet-controller: Fix formatting error ...
2023-11-15Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski
Alexei Starovoitov says: ==================== pull-request: bpf 2023-11-15 We've added 7 non-merge commits during the last 6 day(s) which contain a total of 9 files changed, 200 insertions(+), 49 deletions(-). The main changes are: 1) Do not allocate bpf specific percpu memory unconditionally, from Yonghong. 2) Fix precision backtracking instruction iteration, from Andrii. 3) Fix control flow graph checking, from Andrii. 4) Fix xskxceiver selftest build, from Anders. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Do not allocate percpu memory at init stage selftests/bpf: add more test cases for check_cfg() bpf: fix control-flow graph checking in privileged mode selftests/bpf: add edge case backtracking logic test bpf: fix precision backtracking instruction iteration bpf: handle ldimm64 properly in check_cfg() selftests: bpf: xskxceiver: ksft_print_msg: fix format type error ==================== Link: https://lore.kernel.org/r/20231115214949.48854-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-15selftests/mm: add hugetlb_fault_after_madv to .gitignoreBreno Leitao
commit 116d57303a05 ("selftests/mm: add a new test for madv and hugetlb") added a new test case, but, it didn't add the binary name in tools/testing/selftests/mm/.gitignore. Add hugetlb_fault_after_madv to tools/testing/selftests/mm/.gitignore. Link: https://lkml.kernel.org/r/20231103173400.1608403-2-leitao@debian.org Fixes: 116d57303a05 ("selftests/mm: add a new test for madv and hugetlb") Signed-off-by: Breno Leitao <leitao@debian.org> Reported-by: Ryan Roberts <ryan.roberts@arm.com> Closes: https://lore.kernel.org/all/662df57e-47f1-4c15-9b84-f2f2d587fc5c@arm.com/ Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-11-15selftests/mm: restore number of hugepagesBreno Leitao
The test mm `hugetlb_fault_after_madv` selftest needs one and only one huge page to run, thus it sets `/proc/sys/vm/nr_hugepages` to 1. The problem is that further tests require the previous number of hugepages allocated in order to succeed. Save the number of huge pages before changing it, and restore it once the test finishes, so, further tests could run successfully. Link: https://lkml.kernel.org/r/20231103173400.1608403-1-leitao@debian.org Fixes: 116d57303a05 ("selftests/mm: add a new test for madv and hugetlb") Signed-off-by: Breno Leitao <leitao@debian.org> Reported-by: Ryan Roberts <ryan.roberts@arm.com> Closes: https://lore.kernel.org/all/662df57e-47f1-4c15-9b84-f2f2d587fc5c@arm.com/ Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-11-15selftests: mm: fix some build warningsMuhammad Usama Anjum
Fix build warnings: pagemap_ioctl.c:1154:38: warning: format `%s' expects a matching `char *' argument [-Wformat=] pagemap_ioctl.c:1162:51: warning: format `%ld' expects argument of type `long int', but argument 2 has type `int' [-Wformat=] pagemap_ioctl.c:1192:51: warning: format `%ld' expects argument of type `long int', but argument 2 has type `int' [-Wformat=] pagemap_ioctl.c:1600:51: warning: format `%ld' expects argument of type `long int', but argument 2 has type `int' [-Wformat=] pagemap_ioctl.c:1628:51: warning: format `%ld' expects argument of type `long int', but argument 2 has type `int' [-Wformat=] Link: https://lkml.kernel.org/r/20231103182343.2874015-2-usama.anjum@collabora.com Fixes: 46fd75d4a3c9 ("selftests: mm: add pagemap ioctl tests") Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-11-15selftests: mm: skip whole test instead of failureMuhammad Usama Anjum
Some architectures don't support userfaultfd. Skip running the whole test on them instead of registering the failure. Link: https://lkml.kernel.org/r/20231103182343.2874015-1-usama.anjum@collabora.com Fixes: 46fd75d4a3c9 ("selftests: mm: add pagemap ioctl tests") Reported-by: Ryan Roberts <ryan.roberts@arm.com> Closes: https://lore.kernel.org/all/f8463381-2697-49e9-9460-9dc73452830d@arm.com Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-11-14selftests: mptcp: fix fastclose with csum failurePaolo Abeni
Running the mp_join selftest manually with the following command line: ./mptcp_join.sh -z -C leads to some failures: 002 fastclose server test # ... rtx [fail] got 1 MP_RST[s] TX expected 0 # ... rstrx [fail] got 1 MP_RST[s] RX expected 0 The problem is really in the wrong expectations for the RST checks implied by the csum validation. Note that the same check is repeated explicitly in the same test-case, with the correct expectation and pass successfully. Address the issue explicitly setting the correct expectation for the failing checks. Reported-by: Xiumei Mu <xmu@redhat.com> Fixes: 6bf41020b72b ("selftests: mptcp: update and extend fastclose test-cases") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Matthieu Baerts <matttbe@kernel.org> Link: https://lore.kernel.org/r/20231114-upstream-net-20231113-mptcp-misc-fixes-6-7-rc2-v1-5-7b9cd6a7b7f4@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-12Merge tag 'loongarch-6.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - support PREEMPT_DYNAMIC with static keys - relax memory ordering for atomic operations - support BPF CPU v4 instructions for LoongArch - some build and runtime warning fixes * tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: selftests/bpf: Enable cpu v4 tests for LoongArch LoongArch: BPF: Support signed mod instructions LoongArch: BPF: Support signed div instructions LoongArch: BPF: Support 32-bit offset jmp instructions LoongArch: BPF: Support unconditional bswap instructions LoongArch: BPF: Support sign-extension mov instructions LoongArch: BPF: Support sign-extension load instructions LoongArch: Add more instruction opcodes and emit_* helpers LoongArch/smp: Call rcutree_report_cpu_starting() earlier LoongArch: Relax memory ordering for atomic operations LoongArch: Mark __percpu functions as always inline LoongArch: Disable module from accessing external data directly LoongArch: Support PREEMPT_DYNAMIC with static keys
2023-11-10hv/hv_kvp_daemon: Some small fixes for handling NM keyfilesAni Sinha
Some small fixes: - lets make sure we are not adding ipv4 addresses in ipv6 section in keyfile and vice versa. - ADDR_FAMILY_IPV6 is a bit in addr_family. Test that bit instead of checking the whole value of addr_family. - Some trivial fixes in hv_set_ifconfig.sh. These fixes are proposed after doing some internal testing at Red Hat. CC: Shradha Gupta <shradhagupta@linux.microsoft.com> CC: Saurabh Sengar <ssengar@linux.microsoft.com> Fixes: 42999c904612 ("hv/hv_kvp_daemon:Support for keyfile based connection profile") Signed-off-by: Ani Sinha <anisinha@redhat.com> Reviewed-by: Shradha Gupta <Shradhagupta@linux.microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20231016133122.2419537-1-anisinha@redhat.com>
2023-11-09selftests/bpf: add more test cases for check_cfg()Andrii Nakryiko
Add a few more simple cases to validate proper privileged vs unprivileged loop detection behavior. conditional_loop2 is the one reported by Hao Sun that triggered this set of fixes. Acked-by: Eduard Zingerman <eddyz87@gmail.com> Suggested-by: Hao Sun <sunhao.th@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231110061412.2995786-2-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-15 13:38:00 +0000