summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2023-12-14selftests/net: convert fib_nexthop_multiprefix to run it in unique namespaceHangbin Liu
Here is the test result after conversion. ]# ./fib_nexthop_multiprefix.sh TEST: IPv4: host 0 to host 1, mtu 1300 [ OK ] TEST: IPv6: host 0 to host 1, mtu 1300 [ OK ] TEST: IPv4: host 0 to host 2, mtu 1350 [ OK ] TEST: IPv6: host 0 to host 2, mtu 1350 [ OK ] TEST: IPv4: host 0 to host 3, mtu 1400 [ OK ] TEST: IPv6: host 0 to host 3, mtu 1400 [ OK ] TEST: IPv4: host 0 to host 1, mtu 1300 [ OK ] TEST: IPv6: host 0 to host 1, mtu 1300 [ OK ] TEST: IPv4: host 0 to host 2, mtu 1350 [ OK ] TEST: IPv6: host 0 to host 2, mtu 1350 [ OK ] TEST: IPv4: host 0 to host 3, mtu 1400 [ OK ] TEST: IPv6: host 0 to host 3, mtu 1400 [ OK ] Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20231213060856.4030084-8-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-14selftests/net: fix grep checking for fib_nexthop_multiprefixHangbin Liu
When running fib_nexthop_multiprefix test I saw all IPv6 test failed. e.g. ]# ./fib_nexthop_multiprefix.sh TEST: IPv4: host 0 to host 1, mtu 1300 [ OK ] TEST: IPv6: host 0 to host 1, mtu 1300 [FAIL] With -v it shows COMMAND: ip netns exec h0 /usr/sbin/ping6 -s 1350 -c5 -w5 2001:db8:101::1 PING 2001:db8:101::1(2001:db8:101::1) 1350 data bytes From 2001:db8:100::64 icmp_seq=1 Packet too big: mtu=1300 --- 2001:db8:101::1 ping statistics --- 1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms Route get 2001:db8:101::1 via 2001:db8:100::64 dev eth0 src 2001:db8:100::1 metric 1024 expires 599sec mtu 1300 pref medium Searching for: 2001:db8:101::1 from :: via 2001:db8:100::64 dev eth0 src 2001:db8:100::1 .* mtu 1300 The reason is when CONFIG_IPV6_SUBTREES is not enabled, rt6_fill_node() will not put RTA_SRC info. After fix: ]# ./fib_nexthop_multiprefix.sh TEST: IPv4: host 0 to host 1, mtu 1300 [ OK ] TEST: IPv6: host 0 to host 1, mtu 1300 [ OK ] Fixes: 735ab2f65dce ("selftests: Add test with multiple prefixes using single nexthop") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20231213060856.4030084-7-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-14selftests/net: convert fcnal-test.sh to run it in unique namespaceHangbin Liu
Here is the test result after conversion. There are some failures, but it also exists on my system without this patch. So it's not affectec by this patch and I will check the reason later. ]# time ./fcnal-test.sh /usr/bin/which: no nettest in (/root/.local/bin:/root/bin:/usr/share/Modules/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin) ########################################################################### IPv4 ping ########################################################################### ################################################################# No VRF SYSCTL: net.ipv4.raw_l3mdev_accept=0 TEST: ping out - ns-B IP [ OK ] TEST: ping out, device bind - ns-B IP [ OK ] TEST: ping out, address bind - ns-B IP [ OK ] ... ################################################################# SNAT on VRF TEST: IPv4 TCP connection over VRF with SNAT [ OK ] TEST: IPv6 TCP connection over VRF with SNAT [ OK ] Tests passed: 893 Tests failed: 21 real 52m48.178s user 0m34.158s sys 1m42.976s BTW, this test needs a really long time. So expand the timeout to 1h. Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20231213060856.4030084-6-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-14selftests/net: convert srv6_end_dt6_l3vpn_test.sh to run it in unique namespaceHangbin Liu
As the name \${rt-${rt}} may make reader confuse, convert the variable hs/rt in setup_rt/hs to hid, rid. Here is the test result after conversion. ]# ./srv6_end_dt6_l3vpn_test.sh ################################################################################ TEST SECTION: IPv6 routers connectivity test ################################################################################ TEST: Routers connectivity: rt-1 -> rt-2 [ OK ] TEST: Routers connectivity: rt-2 -> rt-1 [ OK ] ... TEST: Hosts isolation: hs-t200-4 -X-> hs-t100-2 [ OK ] Tests passed: 18 Tests failed: 0 Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20231213060856.4030084-5-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-14selftests/net: convert srv6_end_dt4_l3vpn_test.sh to run it in unique namespaceHangbin Liu
As the name \${rt-${rt}} may make reader confuse, convert the variable hs/rt in setup_rt/hs to hid, rid. Here is the test result after conversion. ]# ./srv6_end_dt4_l3vpn_test.sh ################################################################################ TEST SECTION: IPv6 routers connectivity test ################################################################################ TEST: Routers connectivity: rt-1 -> rt-2 [ OK ] TEST: Routers connectivity: rt-2 -> rt-1 [ OK ] ... TEST: Hosts isolation: hs-t200-4 -X-> hs-t100-2 [ OK ] Tests passed: 18 Tests failed: 0 Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20231213060856.4030084-4-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-14selftests/net: convert srv6_end_dt46_l3vpn_test.sh to run it in unique namespaceHangbin Liu
As the name \${rt-${rt}} may make reader confuse, convert the variable hs/rt in setup_rt/hs to hid, rid. Here is the test result after conversion. ]# ./srv6_end_dt46_l3vpn_test.sh ################################################################################ TEST SECTION: IPv6 routers connectivity test ################################################################################ TEST: Routers connectivity: rt-1 -> rt-2 [ OK ] TEST: Routers connectivity: rt-2 -> rt-1 [ OK ] ... TEST: IPv4 Hosts isolation: hs-t200-4 -X-> hs-t100-2 [ OK ] Tests passed: 34 Tests failed: 0 Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20231213060856.4030084-3-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-14selftests/net: add variable NS_LIST for lib.shHangbin Liu
Add a global variable NS_LIST to store all the namespaces that setup_ns created, so the caller could call cleanup_all_ns() instead of remember all the netns names when using cleanup_ns(). Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20231213060856.4030084-2-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-14tools: ynl-gen: print prototypes for recursive stuffJakub Kicinski
We avoid printing forward declarations and prototypes for most types by sorting things topologically. But if structs nest we do need the forward declarations, there's no other way. Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20231213231432.2944749-9-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-14tools: ynl-gen: store recursive nests by a pointerJakub Kicinski
To avoid infinite nesting store recursive structs by pointer. If recursive struct is placed in the op directly - the first instance can be stored by value. That makes the code much less of a pain for majority of practical uses. Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20231213231432.2944749-8-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-14tools: ynl-gen: re-sort ignoring recursive nestsJakub Kicinski
We try to keep the structures and helpers "topologically sorted", to avoid forward declarations. When recursive nests are at play we need to sort twice, because structs which end up being marked as recursive will get a full set of forward declarations, so we should ignore them for the purpose of sorting. Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20231213231432.2944749-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-14tools: ynl-gen: record information about recursive nestsJakub Kicinski
Track which nests are recursive. Non-recursive nesting gets rendered in C as directly nested structs. For recursive ones we need to put a pointer in, rather than full struct. Track this information, no change to generated code, yet. Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20231213231432.2944749-6-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-14tools: ynl-gen: fill in implementations for TypeUnusedJakub Kicinski
Fill in more empty handlers for TypeUnused. When 'unused' attr gets specified in a nested set we have to cleanly skip it during code generation. Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20231213231432.2944749-5-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-14tools: ynl-gen: support fixed headers in genetlinkJakub Kicinski
Support genetlink families using simple fixed headers. Assume fixed header is identical for all ops of the family for now. Fixed headers are added to the request and reply structs as a _hdr member, and copied to/from netlink messages appropriately. Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20231213231432.2944749-4-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-14tools: ynl-gen: use enum user type for members and argsJakub Kicinski
Commit 30c902001534 ("tools: ynl-gen: use enum name from the spec") added pre-cooked user type for enums. Use it to fix ignoring enum-name provided in the spec. This changes a type in struct ethtool_tunnel_udp_entry but is generally inconsequential for current families. Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20231213231432.2944749-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-14tools: ynl-gen: add missing request free helpers for dumpsJakub Kicinski
The code gen generates a prototype for dump request free in the header, but no implementation in the source. Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20231213231432.2944749-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-14selftests/bpf: utilize string values for delegate_xxx mount optionsAndrii Nakryiko
Use both hex-based and string-based way to specify delegate mount options for BPF FS. Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231214225016.1209867-3-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/intel/iavf/iavf_ethtool.c 3a0b5a2929fd ("iavf: Introduce new state machines for flow director") 95260816b489 ("iavf: use iavf_schedule_aq_request() helper") https://lore.kernel.org/all/84e12519-04dc-bd80-bc34-8cf50d7898ce@intel.com/ drivers/net/ethernet/broadcom/bnxt/bnxt.c c13e268c0768 ("bnxt_en: Fix HWTSTAMP_FILTER_ALL packet timestamp logic") c2f8063309da ("bnxt_en: Refactor RX VLAN acceleration logic.") a7445d69809f ("bnxt_en: Add support for new RX and TPA_START completion types for P7") 1c7fd6ee2fe4 ("bnxt_en: Rename some macros for the P5 chips") https://lore.kernel.org/all/20231211110022.27926ad9@canb.auug.org.au/ drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c bd6781c18cb5 ("bnxt_en: Fix wrong return value check in bnxt_close_nic()") 84793a499578 ("bnxt_en: Skip nic close/open when configuring tstamp filters") https://lore.kernel.org/all/20231214113041.3a0c003c@canb.auug.org.au/ drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c 3d7a3f2612d7 ("net/mlx5: Nack sync reset request when HotPlug is enabled") cecf44ea1a1f ("net/mlx5: Allow sync reset flow when BF MGT interface device is present") https://lore.kernel.org/all/20231211110328.76c925af@canb.auug.org.au/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-14bpf: xfrm: Add selftest for bpf_xdp_get_xfrm_state()Daniel Xu
This commit extends test_tunnel selftest to test the new XDP xfrm state lookup kfunc. Co-developed-by: Antony Antony <antony.antony@secunet.com> Signed-off-by: Antony Antony <antony.antony@secunet.com> Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Link: https://lore.kernel.org/r/e704e9a4332e3eac7b458e4bfdec8fcc6984cdb6.1702593901.git.dxu@dxuuu.xyz Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-14bpf: selftests: Move xfrm tunnel test to test_progsDaniel Xu
test_progs is better than a shell script b/c C is a bit easier to maintain than shell. Also it's easier to use new infra like memory mapped global variables from C via bpf skeleton. Co-developed-by: Antony Antony <antony.antony@secunet.com> Signed-off-by: Antony Antony <antony.antony@secunet.com> Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Link: https://lore.kernel.org/r/a350db9e08520c64544562d88ec005a039124d9b.1702593901.git.dxu@dxuuu.xyz Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-14bpf: selftests: test_tunnel: Use vmlinux.h declarationsDaniel Xu
vmlinux.h declarations are more ergnomic, especially when working with kfuncs. The uapi headers are often incomplete for kfunc definitions. This commit also switches bitfield accesses to use CO-RE helpers. Switching to vmlinux.h definitions makes the verifier very unhappy with raw bitfield accesses. The error is: ; md.u.md2.dir = direction; 33: (69) r1 = *(u16 *)(r2 +11) misaligned stack access off (0x0; 0x0)+-64+11 size 2 Fix by using CO-RE-aware bitfield reads and writes. Co-developed-by: Antony Antony <antony.antony@secunet.com> Signed-off-by: Antony Antony <antony.antony@secunet.com> Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Link: https://lore.kernel.org/r/884bde1d9a351d126a3923886b945ea6b1b0776b.1702593901.git.dxu@dxuuu.xyz Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-14bpf: selftests: test_tunnel: Setup fresh topology for each subtestDaniel Xu
This helps with determinism b/c individual setup/teardown prevents leaking state between different subtests. Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Link: https://lore.kernel.org/r/0fb59fa16fb58cca7def5239df606005a3e8dd0e.1702593901.git.dxu@dxuuu.xyz Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-14selftests/bpf: Remove flaky test_btf_id testYonghong Song
With previous patch, one of subtests in test_btf_id becomes flaky and may fail. The following is a failing example: Error: #26 btf Error: #26/174 btf/BTF ID Error: #26/174 btf/BTF ID btf_raw_create:PASS:check 0 nsec btf_raw_create:PASS:check 0 nsec test_btf_id:PASS:check 0 nsec ... test_btf_id:PASS:check 0 nsec test_btf_id:FAIL:check BTF lingersdo_test_get_info:FAIL:check failed: -1 The test tries to prove a btf_id not available after the map is closed. But btf_id is freed only after workqueue and a rcu grace period, compared to previous case just after a rcu grade period. Depending on system workload, workqueue could take quite some time to execute function bpf_map_free_deferred() which may cause the test failure. Instead of adding arbitrary delays, let us remove the logic to check btf_id availability after map is closed. Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20231214203820.1469402-1-yonghong.song@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-14selftests/xsk: Fix for SEND_RECEIVE_UNALIGNED testTushar Vyavahare
Fix test broken by shared umem test and framework enhancement commit. Correct the current implementation of pkt_stream_replace_half() by ensuring that nb_valid_entries are not set to half, as this is not true for all the tests. Ensure that the expected value for valid_entries for the SEND_RECEIVE_UNALIGNED test equals the total number of packets sent, which is 4096. Create a new function called pkt_stream_pkt_set() that allows for packet modification to meet specific requirements while ensuring the accurate maintenance of the valid packet count to prevent inconsistencies in packet tracking. Fixes: 6d198a89c004 ("selftests/xsk: Add a test for shared umem feature") Reported-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/20231214130007.33281-1-tushar.vyavahare@intel.com
2023-12-13bpf: sockmap, test for unconnected af_unix sockJohn Fastabend
Add test to sockmap_basic to ensure af_unix sockets that are not connected can not be added to the map. Ensure we keep DGRAM sockets working however as these will not be connected typically. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/r/20231201180139.328529-3-john.fastabend@gmail.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-12-13selftests/bpf: Check VLAN tag and proto in xdp_metadataLarysa Zaremba
Verify, whether VLAN tag and proto are set correctly. To simulate "stripped" VLAN tag on veth, send test packet from VLAN interface. Also, add TO_STR() macro for convenience. Acked-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Link: https://lore.kernel.org/r/20231205210847.28460-19-larysa.zaremba@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-13selftests/bpf: Add AF_INET packet generation to xdp_metadataLarysa Zaremba
The easiest way to simulate stripped VLAN tag in veth is to send a packet from VLAN interface, attached to veth. Unfortunately, this approach is incompatible with AF_XDP on TX side, because VLAN interfaces do not have such feature. Check both packets sent via AF_XDP TX and regular socket. AF_INET packet will also have a filled-in hash type (XDP_RSS_TYPE_L4), unlike AF_XDP packet, so more values can be checked. Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Acked-by: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/r/20231205210847.28460-18-larysa.zaremba@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-13selftests/bpf: Add flags and VLAN hint to xdp_hw_metadataLarysa Zaremba
Add VLAN hint to the xdp_hw_metadata program. Also, to make metadata layout more straightforward, add flags field to pass information about validity of every separate hint separately. Acked-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Link: https://lore.kernel.org/r/20231205210847.28460-17-larysa.zaremba@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-13selftests/bpf: Allow VLAN packets in xdp_hw_metadataLarysa Zaremba
Make VLAN c-tag and s-tag XDP hint testing more convenient by not skipping VLAN-ed packets. Allow both 802.1ad and 802.1Q headers. Acked-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Link: https://lore.kernel.org/r/20231205210847.28460-16-larysa.zaremba@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-13xdp: Add VLAN tag hintLarysa Zaremba
Implement functionality that enables drivers to expose VLAN tag to XDP code. VLAN tag is represented by 2 variables: - protocol ID, which is passed to bpf code in BE - VLAN TCI, in host byte order Acked-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Link: https://lore.kernel.org/r/20231205210847.28460-10-larysa.zaremba@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-13selftests/bpf: add tests for LIBBPF_BPF_TOKEN_PATH envvarAndrii Nakryiko
Add new subtest validating LIBBPF_BPF_TOKEN_PATH envvar semantics. Extend existing test to validate that LIBBPF_BPF_TOKEN_PATH allows to disable implicit BPF token creation by setting envvar to empty string. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231213190842.3844987-11-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-13libbpf: support BPF token path setting through LIBBPF_BPF_TOKEN_PATH envvarAndrii Nakryiko
To allow external admin authority to override default BPF FS location (/sys/fs/bpf) for implicit BPF token creation, teach libbpf to recognize LIBBPF_BPF_TOKEN_PATH envvar. If it is specified and user application didn't explicitly specify neither bpf_token_path nor bpf_token_fd option, it will be treated exactly like bpf_token_path option, overriding default /sys/fs/bpf location and making BPF token mandatory. Suggested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231213190842.3844987-10-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-13selftests/bpf: add tests for BPF object load with implicit tokenAndrii Nakryiko
Add a test to validate libbpf's implicit BPF token creation from default BPF FS location (/sys/fs/bpf). Also validate that disabling this implicit BPF token creation works. Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231213190842.3844987-9-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-13selftests/bpf: add BPF object loading tests with explicit token passingAndrii Nakryiko
Add a few tests that attempt to load BPF object containing privileged map, program, and the one requiring mandatory BTF uploading into the kernel (to validate token FD propagation to BPF_BTF_LOAD command). Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231213190842.3844987-8-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-13libbpf: wire up BPF token support at BPF object levelAndrii Nakryiko
Add BPF token support to BPF object-level functionality. BPF token is supported by BPF object logic either as an explicitly provided BPF token from outside (through BPF FS path or explicit BPF token FD), or implicitly (unless prevented through bpf_object_open_opts). Implicit mode is assumed to be the most common one for user namespaced unprivileged workloads. The assumption is that privileged container manager sets up default BPF FS mount point at /sys/fs/bpf with BPF token delegation options (delegate_{cmds,maps,progs,attachs} mount options). BPF object during loading will attempt to create BPF token from /sys/fs/bpf location, and pass it for all relevant operations (currently, map creation, BTF load, and program load). In this implicit mode, if BPF token creation fails due to whatever reason (BPF FS is not mounted, or kernel doesn't support BPF token, etc), this is not considered an error. BPF object loading sequence will proceed with no BPF token. In explicit BPF token mode, user provides explicitly either custom BPF FS mount point path or creates BPF token on their own and just passes token FD directly. In such case, BPF object will either dup() token FD (to not require caller to hold onto it for entire duration of BPF object lifetime) or will attempt to create BPF token from provided BPF FS location. If BPF token creation fails, that is considered a critical error and BPF object load fails with an error. Libbpf provides a way to disable implicit BPF token creation, if it causes any troubles (BPF token is designed to be completely optional and shouldn't cause any problems even if provided, but in the world of BPF LSM, custom security logic can be installed that might change outcome dependin on the presence of BPF token). To disable libbpf's default BPF token creation behavior user should provide either invalid BPF token FD (negative), or empty bpf_token_path option. BPF token presence can influence libbpf's feature probing, so if BPF object has associated BPF token, feature probing is instructed to use BPF object-specific feature detection cache and token FD. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231213190842.3844987-7-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-13libbpf: wire up token_fd into feature probing logicAndrii Nakryiko
Adjust feature probing callbacks to take into account optional token_fd. In unprivileged contexts, some feature detectors would fail to detect kernel support just because BPF program, BPF map, or BTF object can't be loaded due to privileged nature of those operations. So when BPF object is loaded with BPF token, this token should be used for feature probing. This patch is setting support for this scenario, but we don't yet pass non-zero token FD. This will be added in the next patch. We also switched BPF cookie detector from using kprobe program to tracepoint one, as tracepoint is somewhat less dangerous BPF program type and has higher likelihood of being allowed through BPF token in the future. This change has no effect on detection behavior. Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231213190842.3844987-6-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-13libbpf: move feature detection code into its own fileAndrii Nakryiko
It's quite a lot of well isolated code, so it seems like a good candidate to move it out of libbpf.c to reduce its size. Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231213190842.3844987-5-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-13libbpf: further decouple feature checking logic from bpf_objectAndrii Nakryiko
Add feat_supported() helper that accepts feature cache instead of bpf_object. This allows low-level code in bpf.c to not know or care about higher-level concept of bpf_object, yet it will be able to utilize custom feature checking in cases where BPF token might influence the outcome. Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231213190842.3844987-4-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-13libbpf: split feature detectors definitions from cached resultsAndrii Nakryiko
Split a list of supported feature detectors with their corresponding callbacks from actual cached supported/missing values. This will allow to have more flexible per-token or per-object feature detectors in subsequent refactorings. Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231213190842.3844987-3-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-13bpf: selftests: Add verifier tests for CO-RE bitfield writesDaniel Xu
Add some tests that exercise BPF_CORE_WRITE_BITFIELD() macro. Since some non-trivial bit fiddling is going on, make sure various edge cases (such as adjacent bitfields and bitfields at the edge of structs) are exercised. Acked-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Link: https://lore.kernel.org/r/72698a1080fa565f541d5654705255984ea2a029.1702325874.git.dxu@dxuuu.xyz Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-12-13bpf: selftests: test_loader: Support __btf_path() annotationDaniel Xu
This commit adds support for per-prog btf_custom_path. This is necessary for testing CO-RE relocations on non-vmlinux types using test_loader infrastructure. Acked-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Link: https://lore.kernel.org/r/660ea7f2fdbdd5103bc1af87c9fc931f05327926.1702325874.git.dxu@dxuuu.xyz Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-12-13libbpf: Add BPF_CORE_WRITE_BITFIELD() macroDaniel Xu
=== Motivation === Similar to reading from CO-RE bitfields, we need a CO-RE aware bitfield writing wrapper to make the verifier happy. Two alternatives to this approach are: 1. Use the upcoming `preserve_static_offset` [0] attribute to disable CO-RE on specific structs. 2. Use broader byte-sized writes to write to bitfields. (1) is a bit hard to use. It requires specific and not-very-obvious annotations to bpftool generated vmlinux.h. It's also not generally available in released LLVM versions yet. (2) makes the code quite hard to read and write. And especially if BPF_CORE_READ_BITFIELD() is already being used, it makes more sense to to have an inverse helper for writing. === Implementation details === Since the logic is a bit non-obvious, I thought it would be helpful to explain exactly what's going on. To start, it helps by explaining what LSHIFT_U64 (lshift) and RSHIFT_U64 (rshift) is designed to mean. Consider the core of the BPF_CORE_READ_BITFIELD() algorithm: val <<= __CORE_RELO(s, field, LSHIFT_U64); val = val >> __CORE_RELO(s, field, RSHIFT_U64); Basically what happens is we lshift to clear the non-relevant (blank) higher order bits. Then we rshift to bring the relevant bits (bitfield) down to LSB position (while also clearing blank lower order bits). To illustrate: Start: ........XXX...... Lshift: XXX......00000000 Rshift: 00000000000000XXX where `.` means blank bit, `0` means 0 bit, and `X` means bitfield bit. After the two operations, the bitfield is ready to be interpreted as a regular integer. Next, we want to build an alternative (but more helpful) mental model on lshift and rshift. That is, to consider: * rshift as the total number of blank bits in the u64 * lshift as number of blank bits left of the bitfield in the u64 Take a moment to consider why that is true by consulting the above diagram. With this insight, we can now define the following relationship: bitfield _ | | 0.....00XXX0...00 | | | | |______| | | lshift | | |____| (rshift - lshift) That is, we know the number of higher order blank bits is just lshift. And the number of lower order blank bits is (rshift - lshift). Finally, we can examine the core of the write side algorithm: mask = (~0ULL << rshift) >> lshift; // 1 val = (val & ~mask) | ((nval << rpad) & mask); // 2 1. Compute a mask where the set bits are the bitfield bits. The first left shift zeros out exactly the number of blank bits, leaving a bitfield sized set of 1s. The subsequent right shift inserts the correct amount of higher order blank bits. 2. On the left of the `|`, mask out the bitfield bits. This creates 0s where the new bitfield bits will go. On the right of the `|`, bring nval into the correct bit position and mask out any bits that fall outside of the bitfield. Finally, by bor'ing the two halves, we get the final set of bits to write back. [0]: https://reviews.llvm.org/D133361 Co-developed-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Co-developed-by: Jonathan Lemon <jlemon@aviatrix.com> Signed-off-by: Jonathan Lemon <jlemon@aviatrix.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Link: https://lore.kernel.org/r/4d3dd215a4fd57d980733886f9c11a45e1a9adf3.1702325874.git.dxu@dxuuu.xyz Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-12-13selftests/bpf: fix compiler warnings in RELEASE=1 modeAndrii Nakryiko
When compiling BPF selftests with RELEASE=1, we get two new warnings, which are treated as errors. Fix them. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Yonghong Song <yonghong.song@linux.dev> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/r/20231212225343.1723081-1-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-13KVM: selftests: Fix dynamic generation of configuration namesPaolo Bonzini
When we dynamically generate a name for a configuration in get-reg-list we use strcat() to append to a buffer allocated using malloc() but we never initialise that buffer. Since malloc() offers no guarantees regarding the contents of the memory it returns this can lead to us corrupting, and likely overflowing, the buffer: vregs: PASS vregs+pmu: PASS sve: PASS sve+pmu: PASS vregs+pauth_address+pauth_generic: PASS X?vr+gspauth_addre+spauth_generi+pmu: PASS The bug is that strcat() should have been strcpy(), and that replacement would be enough to fix it, but there are other things in the function that leave something to be desired. In particular, an (incorrectly) empty config would cause an out of bounds access to c->name[-1]. Since the strcpy() call relies on c->name[0..len-1] being initialized, enforce that invariant throughout the function. Fixes: 2f9ace5d4557 ("KVM: arm64: selftests: get-reg-list: Introduce vcpu configs") Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Co-developed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org> Message-Id: <20231211-kvm-get-reg-list-str-init-v3-1-6554c71c77b1@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-12-13KVM: riscv: selftests: Fix get-reg-list print_reg defaultsAndrew Jones
print_reg() will print everything it knows when it encounters a register ID it's unfamiliar with in the default cases of its decoding switches. Fix several issues with these (until now, never tested) paths; missing newlines in printfs, missing complement operator in mask, and missing return in order to avoid continuing to decode. Fixes: 62d0c458f828 ("KVM: riscv: selftests: get-reg-list print_reg should never fail") Signed-off-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Haibo Xu <haibo1.xu@intel.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2023-12-12Revert "selftests: error out if kernel header files are not yet built"John Hubbard
This reverts commit 9fc96c7c19df ("selftests: error out if kernel header files are not yet built"). It turns out that requiring the kernel headers to be built as a prerequisite to building selftests, does not work in many cases. For example, Peter Zijlstra writes: "My biggest beef with the whole thing is that I simply do not want to use 'make headers', it doesn't work for me. I have a ton of output directories and I don't care to build tools into the output dirs, in fact some of them flat out refuse to work that way (bpf comes to mind)." [1] Therefore, stop erroring out on the selftests build. Additional patches will be required in order to change over to not requiring the kernel headers. [1] https://lore.kernel.org/20231208221007.GO28727@noisy.programming.kicks-ass.net Link: https://lkml.kernel.org/r/20231209020144.244759-1-jhubbard@nvidia.com Fixes: 9fc96c7c19df ("selftests: error out if kernel header files are not yet built") Signed-off-by: John Hubbard <jhubbard@nvidia.com> Cc: Anders Roxell <anders.roxell@linaro.org> Cc: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: David Hildenbrand <david@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Marcos Paulo de Souza <mpdesouza@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-12selftests/mm: cow: print ksft header before printing anything elseDavid Hildenbrand
Doing a ksft_print_msg() before the ksft_print_header() seems to confuse the ksft framework in a strange way: running the test on the cmdline results in the expected output. But piping the output somewhere else, results in some odd output, whereby we repeatedly get the same info printed: # [INFO] detected THP size: 2048 KiB # [INFO] detected hugetlb page size: 2048 KiB # [INFO] detected hugetlb page size: 1048576 KiB # [INFO] huge zeropage is enabled TAP version 13 1..190 # [INFO] Anonymous memory tests in private mappings # [RUN] Basic COW after fork() ... with base page # [INFO] detected THP size: 2048 KiB # [INFO] detected hugetlb page size: 2048 KiB # [INFO] detected hugetlb page size: 1048576 KiB # [INFO] huge zeropage is enabled TAP version 13 1..190 # [INFO] Anonymous memory tests in private mappings # [RUN] Basic COW after fork() ... with base page ok 1 No leak from parent into child # [RUN] Basic COW after fork() ... with swapped out base page # [INFO] detected THP size: 2048 KiB # [INFO] detected hugetlb page size: 2048 KiB # [INFO] detected hugetlb page size: 1048576 KiB # [INFO] huge zeropage is enabled Doing the ksft_print_header() first seems to resolve that and gives us the output we expect: TAP version 13 # [INFO] detected THP size: 2048 KiB # [INFO] detected hugetlb page size: 2048 KiB # [INFO] detected hugetlb page size: 1048576 KiB # [INFO] huge zeropage is enabled 1..190 # [INFO] Anonymous memory tests in private mappings # [RUN] Basic COW after fork() ... with base page ok 1 No leak from parent into child # [RUN] Basic COW after fork() ... with swapped out base page ok 2 No leak from parent into child # [RUN] Basic COW after fork() ... with THP ok 3 No leak from parent into child # [RUN] Basic COW after fork() ... with swapped-out THP ok 4 No leak from parent into child # [RUN] Basic COW after fork() ... with PTE-mapped THP ok 5 No leak from parent into child Link: https://lkml.kernel.org/r/20231206103558.38040-1-david@redhat.com Fixes: f4b5fd6946e2 ("selftests/vm: anon_cow: THP tests") Signed-off-by: David Hildenbrand <david@redhat.com> Reported-by: Nico Pache <npache@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-12selftests/bpf: Relax time_tai test for equal timestamps in tai_forwardYiFei Zhu
We're observing test flakiness on an arm64 platform which might not have timestamps as precise as x86. The test log looks like: test_time_tai:PASS:tai_open 0 nsec test_time_tai:PASS:test_run 0 nsec test_time_tai:PASS:tai_ts1 0 nsec test_time_tai:PASS:tai_ts2 0 nsec test_time_tai:FAIL:tai_forward unexpected tai_forward: actual 1702348135471494160 <= expected 1702348135471494160 test_time_tai:PASS:tai_gettime 0 nsec test_time_tai:PASS:tai_future_ts1 0 nsec test_time_tai:PASS:tai_future_ts2 0 nsec test_time_tai:PASS:tai_range_ts1 0 nsec test_time_tai:PASS:tai_range_ts2 0 nsec #199 time_tai:FAIL This patch changes ASSERT_GT to ASSERT_GE in the tai_forward assertion so that equal timestamps are permitted. Fixes: 64e15820b987 ("selftests/bpf: Add BPF-helper test for CLOCK_TAI access") Signed-off-by: YiFei Zhu <zhuyifei@google.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20231212182911.3784108-1-zhuyifei@google.com
2023-12-12selftests/bpf: Fixes tests for filesystem kfuncsManu Bretelle
`fs_kfuncs.c`'s `test_xattr` would fail the test even when the filesystem did not support xattr, for instance when /tmp is mounted as tmpfs. This change checks errno when setxattr fail. If the failure is due to the operation being unsupported, we will skip the test (just like we would if verity was not enabled on the FS. Before the change, fs_kfuncs test would fail in test_axattr: $ vmtest -k $(make -s image_name) './tools/testing/selftests/bpf/test_progs -a fs_kfuncs' => bzImage ===> Booting [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ ===> Setting up VM ===> Running command [ 4.157491] bpf_testmod: loading out-of-tree module taints kernel. [ 4.161515] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel test_xattr:PASS:create_file 0 nsec test_xattr:FAIL:setxattr unexpected error: -1 (errno 95) #90/1 fs_kfuncs/xattr:FAIL #90/2 fs_kfuncs/fsverity:SKIP #90 fs_kfuncs:FAIL All error logs: test_xattr:PASS:create_file 0 nsec test_xattr:FAIL:setxattr unexpected error: -1 (errno 95) #90/1 fs_kfuncs/xattr:FAIL #90 fs_kfuncs:FAIL Summary: 0/0 PASSED, 1 SKIPPED, 1 FAILED Test plan: $ touch tmpfs_file && truncate -s 1G tmpfs_file && mkfs.ext4 tmpfs_file # /tmp mounted as tmpfs $ vmtest -k $(make -s image_name) './tools/testing/selftests/bpf/test_progs -a fs_kfuncs' => bzImage ===> Booting ===> Setting up VM ===> Running command WARNING! Selftests relying on bpf_testmod.ko will be skipped. Can't find bpf_testmod.ko kernel module: -2 #90/1 fs_kfuncs/xattr:SKIP #90/2 fs_kfuncs/fsverity:SKIP #90 fs_kfuncs:SKIP Summary: 1/0 PASSED, 2 SKIPPED, 0 FAILED # /tmp mounted as ext4 with xattr enabled but not verity $ vmtest -k $(make -s image_name) 'mount -o loop tmpfs_file /tmp && \ /tools/testing/selftests/bpf/test_progs -a fs_kfuncs' => bzImage ===> Booting ===> Setting up VM ===> Running command [ 4.067071] loop0: detected capacity change from 0 to 2097152 [ 4.191882] EXT4-fs (loop0): mounted filesystem 407ffa36-4553-4c8c-8c78-134443630f69 r/w with ordered data mode. Quota mode: none. WARNING! Selftests relying on bpf_testmod.ko will be skipped. Can't find bpf_testmod.ko kernel module: -2 #90/1 fs_kfuncs/xattr:OK #90/2 fs_kfuncs/fsverity:SKIP #90 fs_kfuncs:OK (SKIP: 1/2) Summary: 1/1 PASSED, 1 SKIPPED, 0 FAILED $ tune2fs -O verity tmpfs_file # /tmp as ext4 with both xattr and verity enabled $ vmtest -k $(make -s image_name) 'mount -o loop tmpfs_file /tmp && \ ./tools/testing/selftests/bpf/test_progs -a fs_kfuncs' => bzImage ===> Booting ===> Setting up VM ===> Running command [ 4.291434] loop0: detected capacity change from 0 to 2097152 [ 4.460828] EXT4-fs (loop0): recovery complete [ 4.468631] EXT4-fs (loop0): mounted filesystem 7b4a7b7f-c442-4b06-9ede-254e63cceb52 r/w with ordered data mode. Quota mode: none. [ 4.988074] fs-verity: sha256 using implementation "sha256-generic" WARNING! Selftests relying on bpf_testmod.ko will be skipped. Can't find bpf_testmod.ko kernel module: -2 #90/1 fs_kfuncs/xattr:OK #90/2 fs_kfuncs/fsverity:OK #90 fs_kfuncs:OK Summary: 1/2 PASSED, 0 SKIPPED, 0 FAILED Fixes: 341f06fdddf7 ("selftests/bpf: Add tests for filesystem kfuncs") Signed-off-by: Manu Bretelle <chantr4@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20231211180733.763025-1-chantr4@gmail.com
2023-12-12KVM: selftests: Ensure sysreg-defs.h is generated at the expected pathOliver Upton
Building the KVM selftests from the main selftests Makefile (as opposed to the kvm subdirectory) doesn't work as OUTPUT is set, forcing the generated header to spill into the selftests directory. Additionally, relative paths do not work when building outside of the srctree, as the canonical selftests path is replaced with 'kselftest' in the output. Work around both of these issues by explicitly overriding OUTPUT on the submake cmdline. Move the whole fragment below the point lib.mk gets included such that $(abs_objdir) is available. Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20231212070431.145544-2-oliver.upton@linux.dev Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-12-11selftests/bpf: validate eliminated global subprog is not freplaceableAndrii Nakryiko
Add selftest that establishes dead code-eliminated valid global subprog (global_dead) and makes sure that it's not possible to freplace it, as it's effectively not there. This test will fail with unexpected success before 2afae08c9dcb ("bpf: Validate global subprogs lazily"). v2->v3: - add missing err assignment (Alan); - undo unnecessary signature changes in verifier_global_subprogs.c (Eduard); v1->v2: - don't rely on assembly output in verifier log, which changes between compiler versions (CI). Acked-by: Eduard Zingerman <eddyz87@gmail.com> Reviewed-by: Alan Maguire <alan.maguire@oracle.com> Suggested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/r/20231211174131.2324306-1-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-15 23:43:47 +0000