Age | Commit message (Collapse) | Author |
|
Cross-merge networking fixes after downstream PR (net-6.14-rc4).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Smaller than usual with no fixes from any subtree.
Current release - regressions:
- core: fix race of rtnl_net_lock(dev_net(dev))
Previous releases - regressions:
- core: remove the single page frag cache for good
- flow_dissector: fix handling of mixed port and port-range keys
- sched: cls_api: fix error handling causing NULL dereference
- tcp:
- adjust rcvq_space after updating scaling ratio
- drop secpath at the same time as we currently drop dst
- eth: gtp: suppress list corruption splat in gtp_net_exit_batch_rtnl().
Previous releases - always broken:
- vsock:
- fix variables initialization during resuming
- for connectible sockets allow only connected
- eth:
- geneve: fix use-after-free in geneve_find_dev()
- ibmvnic: don't reference skb after sending to VIOS"
* tag 'net-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (34 commits)
Revert "net: skb: introduce and use a single page frag cache"
net: allow small head cache usage with large MAX_SKB_FRAGS values
nfp: bpf: Add check for nfp_app_ctrl_msg_alloc()
tcp: drop secpath at the same time as we currently drop dst
net: axienet: Set mac_managed_pm
arp: switch to dev_getbyhwaddr() in arp_req_set_public()
net: Add non-RCU dev_getbyhwaddr() helper
sctp: Fix undefined behavior in left shift operation
selftests/bpf: Add a specific dst port matching
flow_dissector: Fix port range key handling in BPF conversion
selftests/net/forwarding: Add a test case for tc-flower of mixed port and port-range
flow_dissector: Fix handling of mixed port and port-range keys
geneve: Suppress list corruption splat in geneve_destroy_tunnels().
gtp: Suppress list corruption splat in gtp_net_exit_batch_rtnl().
dev: Use rtnl_net_dev_lock() in unregister_netdev().
net: Fix dev_net(dev) race in unregister_netdevice_notifier_dev_net().
net: Add net_passive_inc() and net_passive_dec().
net: pse-pd: pd692x0: Fix power limit retrieval
MAINTAINERS: trim the GVE entry
gve: set xdp redirect target only when it is available
...
|
|
Add a simple test for TSO. Send a few MB of data and check device
stats to verify that the device was performing segmentation.
Do the same thing over a few tunnel types.
Injecting GSO packets directly would give us more ability to test
corner cases, but perhaps starting simple is good enough?
# ./ksft-net-drv/drivers/net/hw/tso.py
# Detected qstat for LSO wire-packets
KTAP version 1
1..14
ok 1 tso.ipv4 # SKIP Test requires IPv4 connectivity
ok 2 tso.vxlan4_ipv4 # SKIP Test requires IPv4 connectivity
ok 3 tso.vxlan6_ipv4 # SKIP Test requires IPv4 connectivity
ok 4 tso.vxlan_csum4_ipv4 # SKIP Test requires IPv4 connectivity
ok 5 tso.vxlan_csum6_ipv4 # SKIP Test requires IPv4 connectivity
ok 6 tso.gre4_ipv4 # SKIP Test requires IPv4 connectivity
ok 7 tso.gre6_ipv4 # SKIP Test requires IPv4 connectivity
ok 8 tso.ipv6
ok 9 tso.vxlan4_ipv6
ok 10 tso.vxlan6_ipv6
ok 11 tso.vxlan_csum4_ipv6
ok 12 tso.vxlan_csum6_ipv6
# Testing with mangleid enabled
ok 13 tso.gre4_ipv6
ok 14 tso.gre6_ipv6
# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:7 error:0
Note that the test currently depends on the driver reporting
the LSO count via qstat, which appears to be relatively rare
(virtio, cisco/enic, sfc/efc; but virtio needs host support).
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250218225426.77726-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Looks like more and more tests want to iterate over IP version,
run the same test over ipv4 and ipv6. The current naming of
members in the env class makes it a bit awkward, we have
separate members for ipv4 and ipv6 parameters.
Store the parameters inside dicts, so that tests can easily
index them with ip version.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250218225426.77726-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We already record output of ip link for NETIF in env for easy access.
Record the detailed version. TSO test will want to know the max tso size.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20250218225426.77726-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Find out and record in env the name of the interface which remote host
will use for the IP address provided via config.
Interface name is useful for mausezahn and for setting up tunnels.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20250218225426.77726-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fixes minor spelling errors:
- `simult_flows.sh`: "al testcases" -> "all testcases"
- `psock_tpacket.c`: "accross" -> "across"
Signed-off-by: Suchit Karunakaran <suchitkarunakaran@gmail.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250218165923.20740-1-suchitkarunakaran@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After this patch:
#102/1 flow_dissector_classification/ipv4:OK
#102/2 flow_dissector_classification/ipv4_continue_dissect:OK
#102/3 flow_dissector_classification/ipip:OK
#102/4 flow_dissector_classification/gre:OK
#102/5 flow_dissector_classification/port_range:OK
#102/6 flow_dissector_classification/ipv6:OK
#102 flow_dissector_classification:OK
Summary: 1/6 PASSED, 0 SKIPPED, 0 FAILED
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://patch.msgid.link/20250218043210.732959-5-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
port-range
After this patch:
# ./tc_flower_port_range.sh
TEST: Port range matching - IPv4 UDP [ OK ]
TEST: Port range matching - IPv4 TCP [ OK ]
TEST: Port range matching - IPv6 UDP [ OK ]
TEST: Port range matching - IPv6 TCP [ OK ]
TEST: Port range matching - IPv4 UDP Drop [ OK ]
Cc: Qiang Zhang <dtzq01@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250218043210.732959-3-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add tests for FIB rules that match on source and destination ports with
a mask. Test both good and bad flows.
# ./fib_rule_tests.sh
IPv6 FIB rule tests
[...]
TEST: rule6 check: sport and dport redirect to table [ OK ]
TEST: rule6 check: sport and dport no redirect to table [ OK ]
TEST: rule6 del by pref: sport and dport redirect to table [ OK ]
TEST: rule6 check: sport and dport range redirect to table [ OK ]
TEST: rule6 check: sport and dport range no redirect to table [ OK ]
TEST: rule6 del by pref: sport and dport range redirect to table [ OK ]
TEST: rule6 check: sport and dport masked redirect to table [ OK ]
TEST: rule6 check: sport and dport masked no redirect to table [ OK ]
TEST: rule6 del by pref: sport and dport masked redirect to table [ OK ]
[...]
Tests passed: 292
Tests failed: 0
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250217134109.311176-9-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, only matching on specific ports is tested. Add port range
testing to make sure this use case does not regress.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250217134109.311176-8-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix few spelling mistakes in net selftests
Signed-off-by: Chandra Mohan Sundar <chandru.dav@gmail.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20250217141520.81033-1-chandru.dav@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Changes to MC remote need to be reflected in actual group memberships.
Add a test to verify that it is the case.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Instead of inlining equivalents, use lib.sh-provided primitives.
Use defer to manage vx lifetime.
This will make it easier to extend the test in the next patch.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This helper could be useful to more than just forwarding tests.
Move it upstairs and port over to log_test_skip().
Split the function into two parts: the bit that actually checks and
reports skip, which is in a new function check_command(). And a bit
that exits the test script if the check fails. This allows users
consistent checking behavior while giving an option to bail out from
a single test without bailing out of the whole script.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Verify that for a connectible AF_VSOCK socket, merely having a transport
assigned is insufficient; socket must be connected for the sockmap to
accept.
This does not test datagram vsocks. Even though it hardly matters. VMCI is
the only transport that features VSOCK_TRANSPORT_F_DGRAM, but it has an
unimplemented vsock_transport::readskb() callback, making it unsupported by
BPF/sockmap.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit 515745445e92 ("selftest/bpf: Add test for vsock removal from sockmap
on close()") added test that checked if proto::close() callback was invoked
on AF_VSOCK socket release. I.e. it verified that a close()d vsock does
indeed get removed from the sockmap.
It was done simply by creating a socket pair and attempting to replace a
close()d one with its peer. Since, due to a recent change, sockmap does not
allow updating index with a non-established connectible vsock, redo it with
a freshly established one.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When testing if we should try to compact memory or drop caches before we
run the THP or HugeTLB tests we use | as an or operator. This doesn't
work since run_vmtests.sh is written in shell where this is used to pipe
the output of the first argument into the second. Instead use the shell's
-o operator.
Link: https://lkml.kernel.org/r/20250212-kselftest-mm-no-hugepages-v1-1-44702f538522@kernel.org
Fixes: b433ffa8dbac ("selftests: mm: perform some system cleanup before using hugepages")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Nico Pache <npache@redhat.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
getdelays had a compilation issue because the format string was not
updated when the "delay min" was added. For example, after adding the
"delay min" in printf, there were 7 strings but only 6 "%s" format
specifiers. Similarly, after adding the 't->cpu_delay_total', there were
7 variables but only 6 format characters specifiers, causing compilation
issues as follows. This commit fixes these issues to ensure that
getdelays compiles correctly.
root@xx:~/linux-next/tools/accounting$ make
getdelays.c:199:9: warning: format `%llu' expects argument of type
`long long unsigned int', but argument 8 has type `char *' [-Wformat=]
199 | printf("\n\nCPU %15s%15s%15s%15s%15s%15s\n"
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.....
216 | "delay total", "delay average", "delay max", "delay min",
| ~~~~~~~~~~~
| |
| char *
getdelays.c:200:21: note: format string is defined here
200 | " %15llu%15llu%15llu%15llu%15.3fms%13.6fms\n"
| ~~~~~^
| |
| long long unsigned int
| %15s
getdelays.c:199:9: warning: format `%f' expects argument of type
`double', but argument 12 has type `long long unsigned int' [-Wformat=]
199 | printf("\n\nCPU %15s%15s%15s%15s%15s%15s\n"
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.....
220 | (unsigned long long)t->cpu_delay_total,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| |
| long long unsigned int
.....
Link: https://lkml.kernel.org/r/20250208144400544RduNRhwIpT3m2JyRBqskZ@zte.com.cn
Fixes: f65c64f311ee ("delayacct: add delay min to record delay peak")
Reviewed-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: Wang Yaxin <wang.yaxin@zte.com.cn>
Signed-off-by: Kun Jiang <jiang.kun2@zte.com.cn>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Fan Yu <fan.yu9@zte.com.cn>
Cc: Peilin He <he.peilin@zte.com.cn>
Cc: Qiang Tu <tu.qiang35@zte.com.cn>
Cc: wangyong <wang.yong12@zte.com.cn>
Cc: ye xingchen <ye.xingchen@zte.com.cn>
Cc: Yunkai Zhang <zhang.yunkai@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
musl-libc warns about the following:
/home/florian/dev/buildroot/output/arm64/rpi4-b/host/aarch64-buildroot-linux-musl/sysroot/usr/include/sys/errno.h:1:2: attention: #warning redirecting incorrect #include <sys/errno.h> to <errno.h> [-Wcpp]
1 | #warning redirecting incorrect #include <sys/errno.h> to <errno.h>
| ^~~~~~~
/home/florian/dev/buildroot/output/arm64/rpi4-b/host/aarch64-buildroot-linux-musl/sysroot/usr/include/sys/fcntl.h:1:2: attention: #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h> [-Wcpp]
1 | #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h>
| ^~~~~~~
include errno.h and fcntl.h directly.
Link: https://lkml.kernel.org/r/20250210200518.1137295-1-florian.fainelli@broadcom.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Test that queues which are used for AF_XDP have the xsk nest attribute.
The attribute is currently empty, but its existence means the AF_XDP is
being used for the queue. Enable CONFIG_XDP_SOCKETS for
selftests/drivers/net tests, as well.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250214211255.14194-4-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Expose a new per-queue nest attribute, xsk, which will be present for
queues that are being used for AF_XDP. If the queue is not being used for
AF_XDP, the nest will not be present.
In the future, this attribute can be extended to include more data about
XSK as it is needed.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250214211255.14194-3-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce tests to verify the correct functionality of the SO_RCVMARK and
SO_RCVPRIORITY socket options.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Suggested-by: Ferenc Fejes <fejes@inf.elte.hu>
Signed-off-by: Anna Emese Nyiri <annaemesenyiri@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250214205828.48503-1-annaemesenyiri@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch fixes a grammatical error in a test log message
in reuseaddr_ports_exhausted.c for better clarity.
Signed-off-by: Pranav Tyagi <pranav.tyagi03@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250213152612.4434-1-pranav.tyagi03@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
- Move a warning about a lld.ld breakage into the verbose setting as
said breakage has been fixed in the meantime
- Teach objtool to ignore dangling jump table entries added by Clang
* tag 'objtool_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Move dodgy linker warn to verbose
objtool: Ignore dangling jump table entries
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Large set of fixes for vector handling, especially in the
interactions between host and guest state.
This fixes a number of bugs affecting actual deployments, and
greatly simplifies the FP/SIMD/SVE handling. Thanks to Mark Rutland
for dealing with this thankless task.
- Fix an ugly race between vcpu and vgic creation/init, resulting in
unexpected behaviours
- Fix use of kernel VAs at EL2 when emulating timers with nVHE
- Small set of pKVM improvements and cleanups
x86:
- Fix broken SNP support with KVM module built-in, ensuring the PSP
module is initialized before KVM even when the module
infrastructure cannot be used to order initcalls
- Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being
emulated by KVM to fix a NULL pointer dereference
- Enter guest mode (L2) from KVM's perspective before initializing
the vCPU's nested NPT MMU so that the MMU is properly tagged for
L2, not L1
- Load the guest's DR6 outside of the innermost .vcpu_run() loop, as
the guest's value may be stale if a VM-Exit is handled in the
fastpath"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
x86/sev: Fix broken SNP support with KVM module built-in
KVM: SVM: Ensure PSP module is initialized if KVM module is built-in
crypto: ccp: Add external API interface for PSP module initialization
KVM: arm64: vgic: Hoist SGI/PPI alloc from vgic_init() to kvm_create_vgic()
KVM: arm64: timer: Drop warning on failed interrupt signalling
KVM: arm64: Fix alignment of kvm_hyp_memcache allocations
KVM: arm64: Convert timer offset VA when accessed in HYP code
KVM: arm64: Simplify warning in kvm_arch_vcpu_load_fp()
KVM: arm64: Eagerly switch ZCR_EL{1,2}
KVM: arm64: Mark some header functions as inline
KVM: arm64: Refactor exit handlers
KVM: arm64: Refactor CPTR trap deactivation
KVM: arm64: Remove VHE host restore of CPACR_EL1.SMEN
KVM: arm64: Remove VHE host restore of CPACR_EL1.ZEN
KVM: arm64: Remove host FPSIMD saving for non-protected KVM
KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME state
KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop
KVM: nSVM: Enter guest mode before initializing nested NPT MMU
KVM: selftests: Add CPUID tests for Hyper-V features that need in-kernel APIC
KVM: selftests: Manage CPUID array in Hyper-V CPUID test's core helper
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust fixes from Miguel Ojeda:
- Fix objtool warning due to future Rust 1.85.0 (to be released in a
few days)
- Clean future Rust 1.86.0 (to be released 2025-04-03) Clippy warning
* tag 'rust-fixes-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: rbtree: fix overindented list item
objtool/rust: add one more `noreturn` Rust function
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Fix lock imbalance in a corner case of dispatch_to_local_dsq()
- Migration disabled tasks were confusing some BPF schedulers and its
handling had a bug. Fix it and simplify the default behavior by
dispatching them automatically
- ops.tick(), ops.disable() and ops.exit_task() were incorrectly
disallowing kfuncs that require the task argument to be the rq
operation is currently operating on and thus is rq-locked.
Allow them.
- Fix autogroup migration handling bug which was occasionally
triggering a warning in the cgroup migration path
- tools/sched_ext, selftest and other misc updates
* tag 'sched_ext-for-6.14-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Use SCX_CALL_OP_TASK in task_tick_scx
sched_ext: Fix the incorrect bpf_list kfunc API in common.bpf.h.
sched_ext: selftests: Fix grammar in tests description
sched_ext: Fix incorrect assumption about migration disabled tasks in task_can_run_on_remote_rq()
sched_ext: Fix migration disabled handling in targeted dispatches
sched_ext: Implement auto local dispatching of migration disabled tasks
sched_ext: Fix incorrect time delta calculation in time_delta()
sched_ext: Fix lock imbalance in dispatch_to_local_dsq()
sched_ext: selftests/dsp_local_on: Fix selftest on UP systems
tools/sched_ext: Add helper to check task migration state
sched_ext: Fix incorrect autogroup migration detection
sched_ext: selftests/dsp_local_on: Fix sporadic failures
selftests/sched_ext: Fix enum resolution
sched_ext: Include task weight in the error state dump
sched_ext: Fixes typos in comments
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- Fix a race window where a newly forked task could escape cgroup.kill
- Remove incorrectly included steal time from cpu.stat::usage_usec
- Minor update in selftest
* tag 'cgroup-for-6.14-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Remove steal time from usage_usec
selftests/cgroup: use bash in test_cpuset_v1_hp.sh
cgroup: fix race between fork and cgroup.kill
|
|
Cross-merge networking fixes after downstream PR (net-6.14-rc3).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wireless and bluetooth.
Kalle Valo steps down after serving as the WiFi driver maintainer for
over a decade.
Current release - fix to a fix:
- vsock: orphan socket after transport release, avoid null-deref
- Bluetooth: L2CAP: fix corrupted list in hci_chan_del
Current release - regressions:
- eth:
- stmmac: correct Rx buffer layout when SPH is enabled
- iavf: fix a locking bug in an error path
- rxrpc: fix alteration of headers whilst zerocopy pending
- s390/qeth: move netif_napi_add_tx() and napi_enable() from under BH
- Revert "netfilter: flowtable: teardown flow if cached mtu is stale"
Current release - new code bugs:
- rxrpc: fix ipv6 path MTU discovery, only ipv4 worked
- pse-pd: fix deadlock in current limit functions
Previous releases - regressions:
- rtnetlink: fix netns refleak with rtnl_setlink()
- wifi: brcmfmac: use random seed flag for BCM4355 and BCM4364
firmware
Previous releases - always broken:
- add missing RCU protection of struct net throughout the stack
- can: rockchip: bail out if skb cannot be allocated
- eth: ti: am65-cpsw: base XDP support fixes
Misc:
- ethtool: tsconfig: update the format of hwtstamp flags, changes the
uAPI but this uAPI was not in any release yet"
* tag 'net-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
net: pse-pd: Fix deadlock in current limit functions
rxrpc: Fix ipv6 path MTU discovery
Reapply "net: skb: introduce and use a single page frag cache"
s390/qeth: move netif_napi_add_tx() and napi_enable() from under BH
mlxsw: Add return value check for mlxsw_sp_port_get_stats_raw()
ipv6: mcast: add RCU protection to mld_newpack()
team: better TEAM_OPTION_TYPE_STRING validation
Bluetooth: L2CAP: Fix corrupted list in hci_chan_del
Bluetooth: btintel_pcie: Fix a potential race condition
Bluetooth: L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd
net: ethernet: ti: am65_cpsw: fix tx_cleanup for XDP case
net: ethernet: ti: am65-cpsw: fix RX & TX statistics for XDP_TX case
net: ethernet: ti: am65-cpsw: fix memleak in certain XDP cases
vsock/test: Add test for SO_LINGER null ptr deref
vsock: Orphan socket after transport release
MAINTAINERS: Add sctp headers to the general netdev entry
Revert "netfilter: flowtable: teardown flow if cached mtu is stale"
iavf: Fix a locking bug in an error path
rxrpc: Fix alteration of headers whilst zerocopy pending
net: phylink: make configuring clock-stop dependent on MAC support
...
|
|
Now BPF only supports bpf_list_push_{front,back}_impl kfunc, not bpf_list_
push_{front,back}.
This patch fix this issue. Without this patch, if we use bpf_list kfunc
in scx, the BPF verifier would complain:
libbpf: extern (func ksym) 'bpf_list_push_back': not found in kernel or
module BTFs
libbpf: failed to load object 'scx_foo'
libbpf: failed to load BPF skeleton 'scx_foo': -EINVAL
With this patch, the bpf list kfunc will work as expected.
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Fixes: 2a52ca7c98960 ("sched_ext: Add scx_simple and scx_example_qmap example schedulers")
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Fixed grammar for a few tests of sched_ext.
Signed-off-by: Devaansh Kumar <devaanshk840@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Explicitly close() a TCP_ESTABLISHED (connectible) socket with SO_LINGER
enabled.
As for now, test does not verify if close() actually lingers.
On an unpatched machine, may trigger a null pointer dereference.
Tested-by: Luigi Leonardi <leonardi@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20250210-vsock-linger-nullderef-v3-2-ef6244d02b54@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a rudimentary YNL spec for nl80211 that covers get-wiphy,
get-interface and get-protocol-features.
./tools/net/ynl/pyynl/cli.py --family nl80211 \
--do get-protocol-features
{'protocol-features': {'split-wiphy-dump'}}
./tools/net/ynl/pyynl/cli.py --family nl80211 \
--dump get-wiphy --json '{ "split-wiphy-dump": true }'
./tools/net/ynl/pyynl/cli.py --family nl80211 \
--dump get-interface
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Link: https://patch.msgid.link/20250211120127.84858-11-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend ynl-gen-c.py with support for indexed-array that has a scalar
sub-type.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250211120127.84858-8-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Turn attribute names with leading digits into valid C names by
prepending an underscore, e.g. 5ghz -> _5ghz
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250211120127.84858-7-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the missing s8 and s16 scalar types to the list of recognised
scalars in ynl-gen-c.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250211120127.84858-6-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ynl tool uses display-hint to know when to format IP addresses in
printed output, but not to parse IP addresses from --json input. Add
support for parsing ipv4 and ipv6 strings.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250211120127.84858-5-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The nl80211 family encodes the list of supported ciphers as a C array of
u32 values. Add support for translating arrays of scalars into strings
for enum names and display hints.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250211120127.84858-4-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When decoding an indexed-array with a scalar subtype, it is currently
only possible to add a display-hint. Add support for decoding each value
as an enum.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250211120127.84858-3-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
_decode_array_attr() uses variable subattrs in every branch when only
one branch decodes more than a single attribute.
Change the variable name to subattr in the branches that only decode a
single attribute so that the intent is more obvious.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250211120127.84858-2-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Starting with Rust 1.85.0 (currently in beta, to be released 2025-02-20),
under some kernel configurations with `CONFIG_RUST_DEBUG_ASSERTIONS=y`,
one may trigger a new `objtool` warning:
rust/kernel.o: warning: objtool: _R...securityNtB2_11SecurityCtx8as_bytes()
falls through to next function _R...core3ops4drop4Drop4drop()
due to a call to the `noreturn` symbol:
core::panicking::assert_failed::<usize, usize>
Thus add it to the list so that `objtool` knows it is actually `noreturn`.
Do so matching with `strstr` since it is a generic.
See commit 56d680dd23c3 ("objtool/rust: list `noreturn` Rust functions")
for more details.
Cc: stable@vger.kernel.org # Needed in 6.12.y and 6.13.y only (Rust is pinned in older LTSs).
Fixes: 56d680dd23c3 ("objtool/rust: list `noreturn` Rust functions")
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20250112143951.751139-1-ojeda@kernel.org
[ Updated Cc: stable@ to include 6.13.y. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Add testcases to x86's Hyper-V CPUID test to verify that KVM advertises
support for features that require an in-kernel local APIC appropriately,
i.e. that KVM hides support from the vCPU-scoped ioctl if the VM doesn't
have an in-kernel local APIC.
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250118003454.2619573-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Allocate, get, and free the CPUID array in the Hyper-V CPUID test in the
test's core helper, instead of copy+pasting code at each call site. In
addition to deduplicating a small amount of code, restricting visibility
of the array to a single invocation of the core test prevents "leaking" an
array across test cases. Passing in @vcpu to the helper will also allow
pivoting on VM-scoped information without needing to pass more booleans,
e.g. to conditionally assert on features that require an in-kernel APIC.
To avoid use-after-free bugs due to overzealous and careless developers,
opportunstically add a comment to explain that the system-scoped helper
caches the Hyper-V CPUID entries, i.e. that the caller is not responsible
for freeing the memory.
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250118003454.2619573-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Make the Hyper-V CPUID test's local helper test_hv_cpuid_e2big() static,
it's not used outside of the test (and isn't intended to be).
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250118003454.2619573-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Convert this very simple smoke test to a KUnit test.
Add a missing `htons` call that was spotted[0] by kernel test robot
<lkp@intel.com> after initial conversion to KUnit.
Link: https://lore.kernel.org/oe-kbuild-all/202502090223.qCYMBjWT-lkp@intel.com/ [0]
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Link: https://patch.msgid.link/20250208-blackholedev-kunit-convert-v2-1-182db9bd56ec@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This change introduces a new selftest case to verify the functionality
of dumping IPv4 multicast addresses using the RTM_GETMULTICAST netlink
message. The test utilizes the ynl library to interact with the
netlink interface and validate that the kernel correctly reports the
joined IPv4 multicast addresses.
To run the test, execute the following command:
$ vng -v --user root --cpus 16 -- \
make -C tools/testing/selftests TARGETS=net \
TEST_PROGS=rtnetlink.py TEST_GEN_PROGS="" run_tests
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Yuyang Huang <yuyanghuang@google.com>
Link: https://patch.msgid.link/20250207110836.2407224-2-yuyanghuang@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Refering to C binaries from Python code is going to be a common
need. Add a helper to convert from path in relation to the test.
Meaning, if the test is in the same directory as the binary, the
call would be simply: cfg.rpath("binary").
The helper name "rpath" is not great. I can't think of a better
name that would be accurate yet concise.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20250207184140.1730466-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We have separate Env classes for local tests and tests with a remote
endpoint. Make it easier to share the code by creating a base class.
Make env loading a method of this class.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20250207184140.1730466-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|