summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2023-06-16selftests: gpio: gpio-sim: Use same variable name for sysfs pathnameAndy Shevchenko
SYSFS_PATH can be used locally and globally, especially that has the same content. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-06-16KVM: s390: selftests: add selftest for CMMA migrationNico Boehr
Add a selftest for CMMA migration on s390. The tests cover: - interaction of dirty tracking and migration mode, see my recent patch "KVM: s390: disable migration mode when dirty tracking is disabled" [1], - several invalid calls of KVM_S390_GET_CMMA_BITS, for example: invalid flags, CMMA support off, with/without peeking - ensure KVM_S390_GET_CMMA_BITS initally reports all pages as dirty, - ensure KVM_S390_GET_CMMA_BITS properly skips over holes in memslots, but also non-dirty pages Note that without the patch at [1] and the small fix in this series, the selftests will fail. [1] https://lore.kernel.org/all/20230127140532.230651-2-nrb@linux.ibm.com/ Signed-off-by: Nico Boehr <nrb@linux.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Message-Id: <20230324145424.293889-3-nrb@linux.ibm.com> Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> [frankja@linux.ibm.com: squashed 20230606150510.671301-1-nrb@linux.ibm.com / "KVM: s390: selftests: CMMA: don't run if CMMA not supported"] Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
2023-06-15selftests: net: fcnal-test: check if FIPS mode is enabledMagali Lemes
There are some MD5 tests which fail when the kernel is in FIPS mode, since MD5 is not FIPS compliant. Add a check and only run those tests if FIPS mode is not enabled. Fixes: f0bee1ebb5594 ("fcnal-test: Add TCP MD5 tests") Fixes: 5cad8bce26e01 ("fcnal-test: Add TCP MD5 tests for VRF") Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Magali Lemes <magali.lemes@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-15selftests: net: vrf-xfrm-tests: change authentication and encryption algosMagali Lemes
The vrf-xfrm-tests tests use the hmac(md5) and cbc(des3_ede) algorithms for performing authentication and encryption, respectively. This causes the tests to fail when fips=1 is set, since these algorithms are not allowed in FIPS mode. Therefore, switch from hmac(md5) and cbc(des3_ede) to hmac(sha1) and cbc(aes), which are FIPS compliant. Fixes: 3f251d741150 ("selftests: Add tests for vrf and xfrms") Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Magali Lemes <magali.lemes@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-15selftests: net: tls: check if FIPS mode is enabledMagali Lemes
TLS selftests use the ChaCha20-Poly1305 and SM4 algorithms, which are not FIPS compliant. When fips=1, this set of tests fails. Add a check and only run these tests if not in FIPS mode. Fixes: 4f336e88a870 ("selftests/tls: add CHACHA20-POLY1305 to tls selftests") Fixes: e506342a03c7 ("selftests/tls: add SM4 GCM/CCM to tls selftests") Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Magali Lemes <magali.lemes@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-15selftests/harness: allow tests to be skipped during setupMagali Lemes
Before executing each test from a fixture, FIXTURE_SETUP is run once. When SKIP is used in FIXTURE_SETUP, the setup function returns early but the test still proceeds to run, unless another SKIP macro is used within the test definition, leading to some code repetition. Therefore, allow tests to be skipped directly from the setup function. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Magali Lemes <magali.lemes@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: include/linux/mlx5/driver.h 617f5db1a626 ("RDMA/mlx5: Fix affinity assignment") dc13180824b7 ("net/mlx5: Enable devlink port for embedded cpu VF vports") https://lore.kernel.org/all/20230613125939.595e50b8@canb.auug.org.au/ tools/testing/selftests/net/mptcp/mptcp_join.sh 47867f0a7e83 ("selftests: mptcp: join: skip check if MIB counter not supported") 425ba803124b ("selftests: mptcp: join: support RM_ADDR for used endpoints or not") 45b1a1227a7a ("mptcp: introduces more address related mibs") 0639fa230a21 ("selftests: mptcp: add explicit check for new mibs") https://lore.kernel.org/netdev/20230609-upstream-net-20230610-mptcp-selftests-support-old-kernels-part-3-v1-0-2896fe2ee8a3@tessares.net/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-15Merge tag 'net-6.4-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from wireless, and netfilter. Selftests excluded - we have 58 patches and diff of +442/-199, which isn't really small but perhaps with the exception of the WiFi locking change it's old(ish) bugs. We have no known problems with v6.4. The selftest changes are rather large as MPTCP folks try to apply Greg's guidance that selftest from torvalds/linux should be able to run against stable kernels. Last thing I should call out is the DCCP/UDP-lite deprecation notices. We are fairly sure those are dead, but if we're wrong reverting them back in won't be fun. Current release - regressions: - wifi: - cfg80211: fix double lock bug in reg_wdev_chan_valid() - iwlwifi: mvm: spin_lock_bh() to fix lockdep regression Current release - new code bugs: - handshake: remove fput() that causes use-after-free Previous releases - regressions: - sched: cls_u32: fix reference counter leak leading to overflow - sched: cls_api: fix lockup on flushing explicitly created chain Previous releases - always broken: - nf_tables: integrate pipapo into commit protocol - nf_tables: incorrect error path handling with NFT_MSG_NEWRULE, fix dangling pointer on failure - ping6: fix send to link-local addresses with VRF - sched: act_pedit: parse L3 header for L4 offset, the skb may not have the offset saved - sched: act_ct: fix promotion of offloaded unreplied tuple - sched: refuse to destroy an ingress and clsact Qdiscs if there are lockless change operations in flight - wifi: mac80211: fix handful of bugs in multi-link operation - ipvlan: fix bound dev checking for IPv6 l3s mode - eth: enetc: correct the indexes of highest and 2nd highest TCs - eth: ice: fix XDP memory leak when NIC is brought up and down Misc: - add deprecation notices for UDP-lite and DCCP - selftests: mptcp: skip tests not supported by old kernels - sctp: handle invalid error codes without calling BUG()" * tag 'net-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits) dccp: Print deprecation notice. udplite: Print deprecation notice. octeon_ep: Add missing check for ioremap selftests/ptp: Fix timestamp printf format for PTP_SYS_OFFSET net: ethernet: stmicro: stmmac: fix possible memory leak in __stmmac_open net: tipc: resize nlattr array to correct size sfc: fix XDP queues mode with legacy IRQ net: macsec: fix double free of percpu stats net: lapbether: only support ethernet devices MAINTAINERS: add reviewers for SMC Sockets s390/ism: Fix trying to free already-freed IRQ by repeated ism_dev_exit() net: dsa: felix: fix taprio guard band overflow at 10Mbps with jumbo frames net/sched: cls_api: Fix lockup on flushing explicitly created chain ice: Fix ice module unload net/handshake: remove fput() that causes use-after-free selftests: forwarding: hw_stats_l3: Set addrgenmode in a separate step net/sched: qdisc_destroy() old ingress and clsact Qdiscs before grafting net/sched: Refactor qdisc_graft() for ingress and clsact Qdiscs net/sched: act_ct: Fix promotion of offloaded unreplied tuple wifi: iwlwifi: mvm: spin_lock_bh() to fix lockdep regression ...
2023-06-15pert tests: Update metric-value for perf stat JSON outputKan Liang
There may be multiplexing triggered, e.g., e-core of ADL. Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ahmad Yasin <ahmad.yasin@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20230615135315.3662428-7-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-15perf stat,jevents: Introduce Default tags for the default modeKan Liang
Introduce a new metricgroup, Default, to tag all the metric groups which will be collected in the default mode. Add a new field, DefaultMetricgroupName, in the JSON file to indicate the real metric group name. It will be printed in the default output to replace the event names. There is nothing changed for the output format. On SPR, both TopdownL1 and TopdownL2 are displayed in the default output. On ARM, Intel ICL and later platforms (before SPR), only TopdownL1 is displayed in the default output. Suggested-by: Stephane Eranian <eranian@google.com> Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ahmad Yasin <ahmad.yasin@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230615135315.3662428-4-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-15perf metric: JSON flag to default metric groupKan Liang
For the default output, the default metric group could vary on different platforms. For example, on SPR, the TopdownL1 and TopdownL2 metrics should be displayed in the default mode. On ICL, only the TopdownL1 should be displayed. Add a flag so we can tag the default metric group for different platforms rather than hack the perf code. The flag is added to Intel TopdownL1 since ICL and ADL, TopdownL2 metrics since SPR. Add a new field, DefaultMetricgroupName, in the JSON file to indicate the real metric group name. Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ahmad Yasin <ahmad.yasin@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20230615135315.3662428-3-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-15perf evsel: Fix the annotation for hardware events on hybridKan Liang
The annotation for hardware events is wrong on hybrid. For example, # ./perf stat -a sleep 1 Performance counter stats for 'system wide': 32,148.85 msec cpu-clock # 32.000 CPUs utilized 374 context-switches # 11.633 /sec 33 cpu-migrations # 1.026 /sec 295 page-faults # 9.176 /sec 18,979,960 cpu_core/cycles/ # 590.378 K/sec 261,230,783 cpu_atom/cycles/ # 8.126 M/sec (54.21%) 17,019,732 cpu_core/instructions/ # 529.404 K/sec 38,020,470 cpu_atom/instructions/ # 1.183 M/sec (63.36%) 3,296,743 cpu_core/branches/ # 102.546 K/sec 6,692,338 cpu_atom/branches/ # 208.167 K/sec (63.40%) 96,421 cpu_core/branch-misses/ # 2.999 K/sec 1,016,336 cpu_atom/branch-misses/ # 31.613 K/sec (63.38%) The hardware events have extended type on hybrid, but the evsel__match() doesn't take it into account. Filter the config on hybrid before checking. With the patch, # ./perf stat -a sleep 1 Performance counter stats for 'system wide': 32,139.90 msec cpu-clock # 32.003 CPUs utilized 343 context-switches # 10.672 /sec 32 cpu-migrations # 0.996 /sec 73 page-faults # 2.271 /sec 13,712,841 cpu_core/cycles/ # 0.000 GHz 258,301,691 cpu_atom/cycles/ # 0.008 GHz (54.20%) 12,428,163 cpu_core/instructions/ # 0.91 insn per cycle 37,786,557 cpu_atom/instructions/ # 2.76 insn per cycle (63.35%) 2,418,826 cpu_core/branches/ # 75.259 K/sec 6,965,962 cpu_atom/branches/ # 216.739 K/sec (63.38%) 72,150 cpu_core/branch-misses/ # 2.98% of all branches 1,032,746 cpu_atom/branch-misses/ # 42.70% of all branches (63.35%) Suggested-by: Ian Rogers <irogers@google.com> Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ahmad Yasin <ahmad.yasin@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20230615135315.3662428-2-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-15perf srcline: Fix handling of inline functionsIan Rogers
We write an address then a ',' to addr2line. With inline data we generally get back (// are my comments): 0x1234 // address foo // function name foo.c:123 // filename:line bar // function name bar.c:123 // filename:line 0x000000000000000 // sentinel address created by ',' ?? // unknown function name ??:0 // unknown filename:line The code was assuming the inline data also had the address, which is incorrect. This means the first inline function name (bar above) needs to be checked to see if it is the sentinel, otherwise to be treated as a function name. The regression was caused by the addition of addresses as the kernel is reporting a symbol at address 0 (used by GNU binutils when it interprets ','). Committer testing: Using: # perf trace --call-graph=dwarf -e lock:contention_* <SNIP> 1244.615 TaskCon~ller #/2645281 lock:contention_begin(lock_addr: 0xffff8e6748da5ab0, flags: 2) __preempt_count_dec_and_test (inlined) trace_contention_begin (inlined) trace_contention_begin (inlined) rwsem_down_read_slowpath ([kernel.kallsyms]) __preempt_count_dec_and_test (inlined) trace_contention_begin (inlined) trace_contention_begin (inlined) rwsem_down_read_slowpath ([kernel.kallsyms]) __down_read_common (inlined) __down_read (inlined) down_read ([kernel.kallsyms]) arch_static_branch (inlined) static_key_false (inlined) __mmap_lock_trace_acquire_returned (inlined) mmap_read_lock (inlined) do_user_addr_fault ([kernel.kallsyms]) arch_local_irq_disable (inlined) handle_page_fault (inlined) exc_page_fault ([kernel.kallsyms]) asm_exc_page_fault ([kernel.kallsyms]) [0x4def008] (/usr/lib64/firefox/libxul.so) 1244.619 TaskCon~ller #/2645281 lock:contention_end(lock_addr: 0xffff8e6748da5ab0) __preempt_count_dec_and_test (inlined) trace_contention_end (inlined) trace_contention_end (inlined) rwsem_down_read_slowpath ([kernel.kallsyms]) __preempt_count_dec_and_test (inlined) trace_contention_end (inlined) trace_contention_end (inlined) rwsem_down_read_slowpath ([kernel.kallsyms]) __down_read_common (inlined) __down_read (inlined) down_read ([kernel.kallsyms]) arch_static_branch (inlined) static_key_false (inlined) __mmap_lock_trace_acquire_returned (inlined) mmap_read_lock (inlined) do_user_addr_fault ([kernel.kallsyms]) arch_local_irq_disable (inlined) handle_page_fault (inlined) exc_page_fault ([kernel.kallsyms]) asm_exc_page_fault ([kernel.kallsyms]) <SNIP> Fixes: 8dc26b6f718a8118 ("perf srcline: Make sentinel reading for binutils addr2line more robust") Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: llvm@lists.linux.dev Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20230615025041.1982072-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-15selftests/ptp: Fix timestamp printf format for PTP_SYS_OFFSETAlex Maftei
Previously, timestamps were printed using "%lld.%u" which is incorrect for nanosecond values lower than 100,000,000 as they're fractional digits, therefore leading zeros are meaningful. This patch changes the format strings to "%lld.%09u" in order to add leading zeros to the nanosecond value. Fixes: 568ebc5985f5 ("ptp: add the PTP_SYS_OFFSET ioctl to the testptp program") Fixes: 4ec54f95736f ("ptp: Fix compiler warnings in the testptp utility") Fixes: 6ab0e475f1f3 ("Documentation: fix misc. warnings") Signed-off-by: Alex Maftei <alex.maftei@amd.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20230615083404.57112-1-alex.maftei@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-15selftests: tty: add selftest for tty timestamp updatesMichal Sekletar
Add new test case which checks that timestamp updates on actual terminal character device (e.g. /dev/pts/0) happen even if the terminal is accessed via magic /dev/tty file. Signed-off-by: Michal Sekletar <msekleta@redhat.com> Message-ID: <20230613172107.78138-2-msekleta@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-15Merge tag 'counter-updates-for-6.5a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-next William writes: First set of Counter updates for the 6.5 cycle Biggest changes in this set include the introduction of a new Intel 8254 interface library module and the refactoring of the existing 104-quad-8 modules to migrate it to the regmap API. Some other minor cleanups touching tools/counter and stm32-timer-cnt are also present. Changes * 104-quad-8 - Remove reference in Kconfig to 25-bit counter value - Utilize bitfield access macros - Refactor to buffer states for CMR, IOR, and IDR - Utilize helper functions to handle PR, FLAG and PSC - Migrate to the regmap API * i8254 - Introduce the Intel 8254 interface library module * stm32-timer-cnt - Reset TIM_TISEL to its default value in probe * tools/counter - Add .gitignore - Remove lingering 'include' directories on make clean * tag 'counter-updates-for-6.5a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter: counter: i8254: Introduce the Intel 8254 interface library module counter: 104-quad-8: Migrate to the regmap API counter: 104-quad-8: Utilize helper functions to handle PR, FLAG and PSC counter: 104-quad-8: Refactor to buffer states for CMR, IOR, and IDR counter: 104-quad-8: Utilize bitfield access macros tools/counter: Makefile: Remove lingering 'include' directories on make clean tools/counter: Add .gitignore counter: stm32-timer-cnt: Reset TIM_TISEL to its default value in probe counter: 104-quad-8: Remove reference in Kconfig to 25-bit counter value
2023-06-15tools: ynl: work around stale system headersJakub Kicinski
The inability to include the uAPI headers directly in tools/ is one of the bigger annoyances of compiling user space code. Most projects trade the pain for smaller inconvenience of having to copy the headers under tools/include. In case of netlink headers I think that we can avoid both. Netlink family headers are simple and should be self-contained. We can try to twiddle the Makefile a little to force-include just the family header, and use system headers for the rest. This works fairly well. There are two warts - for some reason if we specify -include $path/family.h as a compilation flag, the #ifdef header guard does not seem to work. So we need to throw the guard in on the command line as well. Seems like GCC detects that the header is different and tries to include both. Second problem is that make wants hash sign to be escaped or not depending on the version. Sigh. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-14perf srcline: Add a timeout to reading from addr2lineIan Rogers
addr2line may fail to send expected values causing perf to wait indefinitely. Add a 1 second timeout (twice the timeout for reading from /proc/pid/maps) so that such reads don't cause perf to appear to lock up. There are already checks that the file for addr2line contains a debug section but this isn't always sufficient. The problem was observed when a valid elf file would set the configuration for binutils addr2line, then a later read of vmlinux with ELF debug sections would cause a failing write/read which would block indefinitely. As a service to future readers, if the io hits eof or an error, cleanup the addr2line process. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Yang Jihong <yangjihong1@huawei.com> Link: https://lore.kernel.org/r/20230608061812.3715566-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-14tools api: Add simple timeout to io readIan Rogers
In situations like reading from a pipe it can be useful to have a timeout so that the caller doesn't block indefinitely. Implement a simple one based on poll. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Yang Jihong <yangjihong1@huawei.com> Link: http://lore.kernel.org/lkml/20230608061812.3715566-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-14perf tool x86: Fix perf_env memory leakIan Rogers
Found by leak sanitizer: ``` ==1632594==ERROR: LeakSanitizer: detected memory leaks Direct leak of 21 byte(s) in 1 object(s) allocated from: #0 0x7f2953a7077b in __interceptor_strdup ../../../../src/libsanitizer/asan/asan_interceptors.cpp:439 #1 0x556701d6fbbf in perf_env__read_cpuid util/env.c:369 #2 0x556701d70589 in perf_env__cpuid util/env.c:465 #3 0x55670204bba2 in x86__is_amd_cpu arch/x86/util/env.c:14 #4 0x5567020487a2 in arch__post_evsel_config arch/x86/util/evsel.c:83 #5 0x556701d8f78b in evsel__config util/evsel.c:1366 #6 0x556701ef5872 in evlist__config util/record.c:108 #7 0x556701cd6bcd in test__PERF_RECORD tests/perf-record.c:112 #8 0x556701cacd07 in run_test tests/builtin-test.c:236 #9 0x556701cacfac in test_and_print tests/builtin-test.c:265 #10 0x556701cadddb in __cmd_test tests/builtin-test.c:402 #11 0x556701caf2aa in cmd_test tests/builtin-test.c:559 #12 0x556701d3b557 in run_builtin tools/perf/perf.c:323 #13 0x556701d3bac8 in handle_internal_command tools/perf/perf.c:377 #14 0x556701d3be90 in run_argv tools/perf/perf.c:421 #15 0x556701d3c3f8 in main tools/perf/perf.c:537 #16 0x7f2952a46189 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 SUMMARY: AddressSanitizer: 21 byte(s) leaked in 1 allocation(s). ``` Fixes: f7b58cbdb3ff36eb ("perf mem/c2c: Add load store event mappings for AMD") Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Ravi Bangoria <ravi.bangoria@amd.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Link: https://lore.kernel.org/r/20230613235416.1650755-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-14selftests/user_events: Adapt dyn_test to non-persist eventsBeau Belgrave
Now that user_events does not honor persist events the dynamic_events file cannot be easily used to test parsing and matching cases. Update dyn_test to use the direct ABI file instead of dynamic_events so that we still have testing coverage until persist events and dynamic_events file integration has been decided. Link: https://lkml.kernel.org/r/20230614163336.5797-6-beaub@linux.microsoft.com Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-06-14selftests/user_events: Ensure auto cleanup works as expectedBeau Belgrave
User events now auto cleanup upon the last reference put. Update ftrace_test to ensure this works as expected. Ensure EBUSY delays while event is being deleted do not cause transient failures by waiting and re-attempting. Link: https://lkml.kernel.org/r/20230614163336.5797-5-beaub@linux.microsoft.com Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-06-14selftests/user_events: Add perf self-test for empty arguments eventssunliming
Tests to ensure events that has empty arguments can input trace record correctly when using perf. Link: https://lkml.kernel.org/r/20230606062027.1008398-5-sunliming@kylinos.cn Acked-by: Beau Belgrave <beaub@linux.microsoft.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: sunliming <sunliming@kylinos.cn> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-06-14selftests/user_events: Clear the events after perf self-testsunliming
When the self test is completed, perf self-test left the user events not to be cleared. Clear the events by unregister and delete the event. Link: https://lkml.kernel.org/r/20230606062027.1008398-4-sunliming@kylinos.cn Acked-by: Beau Belgrave <beaub@linux.microsoft.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: sunliming <sunliming@kylinos.cn> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-06-14selftests/user_events: Add ftrace self-test for empty arguments eventssunliming
Tests to ensure events that has empty arguments can input trace record correctly when using ftrace. Link: https://lkml.kernel.org/r/20230606062027.1008398-3-sunliming@kylinos.cn Acked-by: Beau Belgrave <beaub@linux.microsoft.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: sunliming <sunliming@kylinos.cn> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-06-14tracing/user_events: Prevent same name but different args eventsunliming
User processes register name_args for events. If the same name but different args event are registered. The trace outputs of second event are printed as the first event. This is incorrect. Return EADDRINUSE back to the user process if the same name but different args event has being registered. Link: https://lore.kernel.org/linux-trace-kernel/20230529032100.286534-1-sunliming@kylinos.cn Signed-off-by: sunliming <sunliming@kylinos.cn> Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Acked-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-06-14selftests: forwarding: hw_stats_l3: Set addrgenmode in a separate stepDanielle Ratson
Setting the IPv6 address generation mode of a net device during its creation never worked, but after commit b0ad3c179059 ("rtnetlink: call validate_linkmsg in rtnl_create_link") it explicitly fails [1]. The failure is caused by the fact that validate_linkmsg() is called before the net device is registered, when it still does not have an 'inet6_dev'. Likewise, raising the net device before setting the address generation mode is meaningless, because by the time the mode is set, the address has already been generated. Therefore, fix the test to first create the net device, then set its IPv6 address generation mode and finally bring it up. [1] # ip link add name mydev addrgenmode eui64 type dummy RTNETLINK answers: Address family not supported by protocol Fixes: ba95e7930957 ("selftests: forwarding: hw_stats_l3: Add a new test") Signed-off-by: Danielle Ratson <danieller@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/f3b05d85b2bc0c3d6168fe8f7207c6c8365703db.1686580046.git.petrm@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-13selftests/tc-testing: Remove configs that no longer existVlad Buslov
Some qdiscs and classifiers have recently been retired from kernel. However, tc-testing config is still cluttered with them which causes noise when using merge_config.sh script to update existing config for tc-testing compatibility. Remove the config settings for affected qdiscs and classifiers. Fixes: fb38306ceb9e ("net/sched: Retire ATM qdisc") Fixes: 051d44209842 ("net/sched: Retire CBQ qdisc") Fixes: bbe77c14ee61 ("net/sched: Retire dsmark qdisc") Fixes: 265b4da82dbf ("net/sched: Retire rsvp classifier") Fixes: 8c710f75256b ("net/sched: Retire tcindex classifier") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-13selftests/tc-testing: Fix SFB db testVlad Buslov
Setting very small value of db like 10ms introduces rounding errors when converting to/from jiffies on some kernel configs. For example, on 250hz the actual value will be set to 12ms which causes the test to fail: # $ sudo ./tdc.py -d eth2 -e 3410 # -- ns/SubPlugin.__init__ # Test 3410: Create SFB with db setting # # All test results: # # 1..1 # not ok 1 3410 - Create SFB with db setting # Could not match regex pattern. Verify command output: # qdisc sfb 1: root refcnt 2 rehash 600s db 12ms limit 1000p max 25p target 20p increment 0.000503548 decrement 4.57771e-05 penalty_rate 10pps penalty_burst 20p Set the value to 100ms instead which currently seem to work on 100hz, 250hz, 300hz and 1000hz kernel configs. Fixes: 6ad92dc56fca ("selftests/tc-testing: add selftests for sfb qdisc") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-13selftests/tc-testing: Fix Error: failed to find target LOGVlad Buslov
Add missing netfilter config dependency. Fixes following example error when running tests via tdc.sh for all XT tests: # $ sudo ./tdc.py -d eth2 -e 2029 # Test 2029: Add xt action with log-prefix # exit: 255 # exit: 0 # failed to find target LOG # # bad action parsing # parse_action: bad value (7:xt)! # Illegal "action" # # -----> teardown stage *** Could not execute: "$TC actions flush action xt" # # -----> teardown stage *** Error message: "Error: Cannot flush unknown TC action. # We have an error flushing # " # returncode 1; expected [0] # # -----> teardown stage *** Aborting test run. # # <_io.BufferedReader name=3> *** stdout *** # # <_io.BufferedReader name=5> *** stderr *** # "-----> teardown stage" did not complete successfully # Exception <class '__main__.PluginMgrTestFail'> ('teardown', ' failed to find target LOG\n\nbad action parsing\nparse_action: bad value (7:xt)!\nIllegal "action"\n', '"-----> teardown stage" did not complete successfully') (caught in test_runner, running test 2 2029 Add xt action with log-prefix stage teardown) # --------------- # traceback # File "/images/src/linux/tools/testing/selftests/tc-testing/./tdc.py", line 495, in test_runner # res = run_one_test(pm, args, index, tidx) # File "/images/src/linux/tools/testing/selftests/tc-testing/./tdc.py", line 434, in run_one_test # prepare_env(args, pm, 'teardown', '-----> teardown stage', tidx['teardown'], procout) # File "/images/src/linux/tools/testing/selftests/tc-testing/./tdc.py", line 245, in prepare_env # raise PluginMgrTestFail( # --------------- # accumulated output for this test: # failed to find target LOG # # bad action parsing # parse_action: bad value (7:xt)! # Illegal "action" # # --------------- # # All test results: # # 1..1 # ok 1 2029 - Add xt action with log-prefix # skipped - "-----> teardown stage" did not complete successfully Fixes: 910d504bc187 ("selftests/tc-testings: add selftests for xt action") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-13selftests/tc-testing: Fix Error: Specified qdisc kind is unknown.Vlad Buslov
All TEQL tests assume that sch_teql module is loaded. Load module in tdc.sh before running qdisc tests. Fixes following example error when running tests via tdc.sh for all TEQL tests: # $ sudo ./tdc.py -d eth2 -e 84a0 # -- ns/SubPlugin.__init__ # Test 84a0: Create TEQL with default setting # exit: 2 # exit: 0 # Error: Specified qdisc kind is unknown. # # -----> teardown stage *** Could not execute: "$TC qdisc del dev $DUMMY handle 1: root" # # -----> teardown stage *** Error message: "Error: Invalid handle. # " # returncode 2; expected [0] # # -----> teardown stage *** Aborting test run. # # <_io.BufferedReader name=3> *** stdout *** # # <_io.BufferedReader name=5> *** stderr *** # "-----> teardown stage" did not complete successfully # Exception <class '__main__.PluginMgrTestFail'> ('teardown', 'Error: Specified qdisc kind is unknown.\n', '"-----> teardown stage" did not complete successfully') (caught in test_runner, running test 2 84a0 Create TEQL with default setting stage teardown) # --------------- # traceback # File "/images/src/linux/tools/testing/selftests/tc-testing/./tdc.py", line 495, in test_runner # res = run_one_test(pm, args, index, tidx) # File "/images/src/linux/tools/testing/selftests/tc-testing/./tdc.py", line 434, in run_one_test # prepare_env(args, pm, 'teardown', '-----> teardown stage', tidx['teardown'], procout) # File "/images/src/linux/tools/testing/selftests/tc-testing/./tdc.py", line 245, in prepare_env # raise PluginMgrTestFail( # --------------- # accumulated output for this test: # Error: Specified qdisc kind is unknown. # # --------------- # # All test results: # # 1..1 # ok 1 84a0 - Create TEQL with default setting # skipped - "-----> teardown stage" did not complete successfully Fixes: cc62fbe114c9 ("selftests/tc-testing: add selftests for teql qdisc") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Victor Nogueira <victor@mojatatu.com> Reviewed-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-13perf vendor events arm64: Add default tags into topdown L1 metricsKan Liang
Add the default tags for ARM as well. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ahmad Yasin <ahmad.yasin@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jing Zhang <renyu.zj@linux.alibaba.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20230607162700.3234712-5-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-13pert tests: Support metricgroup perf stat JSON outputKan Liang
A new field metricgroup has been added in the perf stat JSON output. Support it in the test case. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ahmad Yasin <ahmad.yasin@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20230607162700.3234712-8-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-13perf tests task_analyzer: Skip tests if no libtraceevent supportAditya Gupta
Test "perf script task-analyzer tests" fails in environment with missing libtraceevent support, as perf record fails to create the perf.data file, which further tests depend on. Instead, when perf is not compiled with libtraceevent support, skip those tests instead of failing them, by checking the output of `perf record --dry-run` to see if it prints the error "libtraceevent is necessary for tracepoint support" For the following output, perf compiled with: `make NO_LIBTRACEEVENT=1` Before the patch: 108: perf script task-analyzer tests : test child forked, pid 24105 failed to open perf.data: No such file or directory (try 'perf record' first) FAIL: "invokation of perf script report task-analyzer command failed" Error message: "" FAIL: "test_basic" Error message: "Failed to find required string:'Comm'." failed to open perf.data: No such file or directory (try 'perf record' first) FAIL: "invokation of perf script report task-analyzer --ns --rename-comms-by-tids 0:random command failed" Error message: "" FAIL: "test_ns_rename" Error message: "Failed to find required string:'Comm'." failed to open perf.data: No such file or directory (try 'perf record' first) <...> perf script task-analyzer tests: FAILED! With this patch, the script instead returns 2 signifying SKIP, and after the patch: 108: perf script task-analyzer tests : test child forked, pid 26010 libtraceevent is necessary for tracepoint support WARN: Skipping tests. No libtraceevent support test child finished with -2 perf script task-analyzer tests: Skip Fixes: e8478b84d6ba9ccf ("perf test: Add new task-analyzer tests") Signed-off-by: Aditya Gupta <adityag@linux.ibm.com> Cc: Disha Goel <disgoel@linux.vnet.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Petar Gligoric <petar.gligoric@rohde-schwarz.com> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20230613164145.50488-18-atrajeev@linux.vnet.ibm.com Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-13perf tests task_analyzer: Print command that failed instead of just "perf"Aditya Gupta
Instead of printing "perf command failed" everytime, print the exact command that run earlier Signed-off-by: Aditya Gupta <adityag@linux.ibm.com> Acked-by: Hagen Paul Pfeifer <hagen@jauu.net> Cc: Disha Goel <disgoel@linux.vnet.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20230613164145.50488-17-atrajeev@linux.vnet.ibm.com Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-13perf tests task_analyzer: Fix bad substitution ${$1}Aditya Gupta
${$1} gives bad substitution error on sh, bash, and zsh. This seems like a typo, and this patch modifies it to $1, since that is what it's usage looks like from wherever `check_exec_0` is called. This issue due to ${$1} caused all function calls to give error in `find_str_or_fail` line, and so no test runs completely. But 'perf test "perf script task-analyzer tests"' wrongly reports that tests passed with the status OK, which is wrong considering the tests didn't even run completely Fixes: e8478b84d6ba9ccf ("perf test: add new task-analyzer tests") Signed-off-by: Aditya Gupta <adityag@linux.ibm.com> Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Cc: Disha Goel <disgoel@linux.vnet.ibm.com> Cc: Hagen Paul Pfeifer <hagen@jauu.net> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Petar Gligoric <petar.gligoric@rohde-schwarz.com> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20230613164145.50488-16-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-13perf tests stat+shadow_stat.sh: Fix all POSIX sh warnings found using shellcheckSpoorthy S
Running shellcheck -S on stat+shadow_stat.sh testcase, generates SC2046 and SC2034 warnings, $ shellcheck -S warning tests/shell/stat+shadow_stat.sh res=`printf "%.2f" $(echo "scale=6; $num / $cyc" | bc -q)` : Quote this to prevent word splitting To address the POSIX shell warnings used quotes in the printf expressions, to prevent word splitting. Signed-off-by: Spoorthy S <spoorts2@in.ibm.com> Cc: Disha Goel <disgoel@linux.vnet.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20230613164145.50488-15-atrajeev@linux.vnet.ibm.com Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-13perf tests test_brstack.sh: Fix all POSIX sh warningsGeetika
Fix all the POSIX sh warnings in perf shell test test_brstack.sh Warnings fixed : * In POSIX sh, using lower/mixed case for signal names is undefined. Correcting that in this script. * In POSIX sh, 'local' is undefined. local is supported in many shells, but it's not in POSIX. In POSIX sh, you can adopt some convention to avoid accidentally overwriting variables names, e.g. prefixing with the function name, that is what I have done here. Signed-off-by: Geetika <geetika@linux.ibm.com> Cc: Disha Goel <disgoel@linux.vnet.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20230613164145.50488-14-atrajeev@linux.vnet.ibm.com Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-13perf tests shell: Fixed shellcheck warningsSamir Mulani
Fixed the shellcheck warnings in buildid.sh, record+probe_libc_inet_pton.sh and record+script_probe_vfs_getname.sh perf shell scripts: 1. Prefer [ p ] && [ q ] as [ p -a q ] is not well defined. 2. Prefer [ p ] || [ q ] as [ p -o q ] is not well defined. 3. Used * argument to avoid the argument mixes string and array 4. Resolved issue for variable refernce, where the variable is being used before it has been initialized. 5. Resolved word splitting issue (syntax error). 6. The "err" variable has been removed from buildid.sh since it is not used anywhere in the code. Signed-off-by: Samir Mulani <samir@linux.vnet.ibm.com> Cc: Disha Goel <disgoel@linux.vnet.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20230613164145.50488-13-atrajeev@linux.vnet.ibm.com Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-13perf tests lock_contention: Fix shellscript errorsAbhirup Deb
Use quotes around variables to prevent POSIX word expansion, use uppercase for signals(INT, TERM, EXIT) to avoid mixed/lower case naming of signals and replace "==" with "=" as "==" is not supported by POSIX shell. Signed-off-by: Abhirup Deb <abhirupdeb@linux.vnet.ibm.com> Cc: Disha Goel <disgoel@linux.vnet.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20230613164145.50488-12-atrajeev@linux.vnet.ibm.com Signed-off-by: Anushree Mathur <anushree.mathur2@ibm.com> Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-13perf tests test_arm_spe: Address shellcheck warnings about signal name caseAbhirup Deb
Running shellcheck -S on test_arm_spe.sh throws below warnings: #shellcheck -S warning tests/shell/test_arm_spe.sh In tests/shell/test_arm_spe.sh line 30: trap cleanup_files exit term int ^--^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined. ^--^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined. ^-^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined. Fixed this issue by using uppercase for "EXIT", "TERM" and "INIT" signals to avoid using lower/mixed case for signal names as input. Signed-off-by: Abhirup Deb <abhirupdeb@linux.vnet.ibm.com> Cc: Disha Goel <disgoel@linux.vnet.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20230613164145.50488-11-atrajeev@linux.vnet.ibm.com Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Mukesh Chaurasiya <mukesh.chaurasiya@ibm.com> Signed-off-by: Ojaswin Mujoo <ojaswin.mujoo@ibm.com> Signed-off-by: Piyush Sachdeva <Piyush.Sachdeva@ibm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-13perf tests test_task_analyzer: Fix shellcheck issuesAboorva Devarajan
Fixed the following shellcheck issues in test_task_analyzer.sh file: SC2086: Double quote to prevent globbing and word splitting warnings in shell-check. Fixes the following shellcheck issues, SC2086: Double quote to prevent globbing and word splitting warnings in shell-check. Before Patch: $ shellcheck ./test_task_analyzer.sh | grep "SC2086" | ... In ./test_task_analyzer.sh line 13: SC2086: Double quote to prevent globbing and word splitting. In ./test_task_analyzer.sh line 24: SC2086: Double quote to prevent globbing and word splitting. In ./test_task_analyzer.sh line 39: SC2086: Double quote to prevent globbing and word splitting. After Patch: $ shellcheck ./test_task_analyzer.sh | grep -i "SC2086" None perf test result after patch: PASS: "test_basic" PASS: "test_ns_rename" PASS: "test_ms_filtertasks_highlight" PASS: "test_extended_times_timelimit_limittasks" PASS: "test_summary" PASS: "test_summaryextended" PASS: "test_summaryonly" PASS: "test_extended_times_summary_ns" PASS: "test_extended_times_summary_ns" PASS: "test_csv" PASS: "test_csvsummary" PASS: "test_csv_extended_times" PASS: "test_csvsummary_extended" Signed-off-by: Aboorva Devarajan <aboorvad@linux.vnet.ibm.com> Cc: Disha Goel <disgoel@linux.vnet.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20230613164145.50488-10-atrajeev@linux.vnet.ibm.com Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-13perf tests stat_all_metrics: Fix shellcheck warning SC2076Barnali Guha Thakurata
Fixed shellcheck warning SC2076 in stat_all_metrics.sh. Before the patch: shell$ shellcheck stat_all_metrics.sh In stat_all_metrics.sh line 9: if [[ "$result" =~ "${m:0:50}" ]] || [[ "$result" =~ "<not supported>" ]] ^---------^ SC2076: Don't quote right-hand side of =~, it'll match literally rather than as a regex. In stat_all_metrics.sh line 15: if [[ "$result" =~ "${m:0:50}" ]] ^---------^ SC2076: Don't quote right-hand side of =~, it'll match literally rather than as a regex. In stat_all_metrics.sh line 22: if [[ "$result" =~ "${m:0:50}" ]] ^---------^ SC2076: Don't quote right-hand side of =~, it'll match literally rather than as a regex. After the patch: shell$ shellcheck stat_all_metrics.sh shell$ Signed-off-by: Barnali Guha Thakurata <barnali@linux.ibm.com> Cc: Disha Goel <disgoel@linux.vnet.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20230613164145.50488-9-atrajeev@linux.vnet.ibm.com Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-13perf tests test_arm_coresight: Shellcheck fixesAnushree Mathur
Fixed the following shellcheck issues in test_arm_coresight.sh file: In tools/perf/tests/shell/test_arm_coresight.sh line 31: trap - exit term int ^--^ SC2039: In POSIX sh, using lower/mixed case for signal names is undefined. ^--^ SC2039: In POSIX sh, using lower/mixed case for signal names is undefined. ^-^ SC2039: In POSIX sh, using lower/mixed case for signal names is undefined. In tools/perf/tests/shell/test_arm_coresight.sh line 35: trap cleanup_files exit term int ^--^ SC2039: In POSIX sh, using lower/mixed case for signal names is undefined. ^--^ SC2039: In POSIX sh, using lower/mixed case for signal names is undefined. ^-^ SC2039: In POSIX sh, using lower/mixed case for signal names is undefined. In tools/perf/tests/shell/test_arm_coresight.sh line 92: if [ $? -eq 0 -a -e "$1/enable_sink" ]; then ^-- SC2166: Prefer [ p ] && [ q ] as [ p -a q ] is not well defined. Fixed above warnings by: 1)Capitalize signals(INT, TERM, EXIT) to avoid mixed/lower case naming of signals. 2)Expression [p -a q] was not defined,changed it to [p] && [q] to avoid the ambiguity as this is older format using -a or -o ,now we use [p] && [q] in place of [p -a q] and [p] || [q] in place of [p -o q]. Result after fixing the issues: shell$ shellcheck -S warning test_arm_coresight.sh shell$ Signed-off-by: Anushree Mathur <anushree.mathur@linux.vnet.ibm.com> Cc: Disha Goel <disgoel@linux.vnet.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20230613164145.50488-8-atrajeev@linux.vnet.ibm.com Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-13perf tests stat+csv_output: Fix shellcheck warningsKorrapati Likhitha
Running the shellcheck on stat+csv_output resulted in the following warning. Result with shellcheck without patch: ===== $ shellcheck -S warning stat+csv_output.sh In stat+csv_output.sh line 23: [ $(uname -m) = "s390x" ] && exp='^[6-7]$' ^---------^ SC2046: Quote this to prevent word splitting. In stat+csv_output.sh line 51: [ $(id -u) != 0 ] && [ $(cat /proc/sys/kernel/perf_event_paranoid) -gt $1 ] ^------^ SC2046: Quote this to prevent word splitting. ^-- SC2046: Quote this to prevent word splitting. ===== Fixed the warning SC2046 by adding quotes to prevent word splitting. Result with shellcheck with patch: ===== $ shellcheck -S warning tests/shell/stat+csv_output.sh $ ./perf test "stat CSV output linter" 96: perf stat CSV output linter : Ok ===== Signed-off-by: Korrapati Likhitha <likhitha@linux.ibm.com> Cc: Disha Goel <disgoel@linux.vnet.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20230613164145.50488-6-atrajeev@linux.vnet.ibm.com Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Sathvika Vasireddy <sv@linux.ibm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-13perf tests daemon: Address shellcheck warningsShirisha G
Running shellcheck -S on daemon.sh throws below warnings: Result from shellcheck: # shellcheck -S warning daemon.sh local line_name=`echo "${line}" | awk 'BEGIN { FS = ":" } ; { print $2 }'` ^-------^ SC2155: Declare and assign separately to avoid masking return values. trap "echo 'FAILED: Signal caught'; daemon_exit ${config}; exit 1" SIGINT SIGTERM ^-------^ SC2064: Use single quotes, otherwise this expands now rather than when signalled. count=`ls ${base}/session-test/ | grep perf.data | wc -l` ^-- SC2010: Don't use ls | grep. Use a glob or a for loop with a condition to allow non-alphanumeric filenames. if [ ${size} != "OK" -o ${type} != "OK" ]; then ^-- SC2166: Prefer [ p ] || [ q ] as [ p -o q ] is not well defined. Fixed above warnings by: - declaring and assigning local variables separately - To fix SC2010, instead of using "ls | grep", used glob to allow non-alphanumeric filenames - Used single quotes to prevent expanding. Result from shellcheck after patch changes: $ shellcheck -S warning daemon.sh $ echo $? 0 Signed-off-by: Shirisha G <shirisha@linux.ibm.com> Cc: Disha Goel <disgoel@linux.vnet.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20230613164145.50488-5-atrajeev@linux.vnet.ibm.com Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-13perf tests arm_callgraph_fp: Address shellcheck warnings about signal names ↵Spoorthy S
and adding double quotes for expression Running shellcheck -S on test_arm_calligraph_fp throws warnings SC2086 and SC3049,       $shellcheck -S warning tests/shell/test_arm_callgraph_fp.sh          rm -f $PERF_DATA             : Double quote to prevent globbing and word splitting.          trap cleanup_files exit term int       : In POSIX sh, using lower/mixed case for signal names is undefined. After fixing the warnings,       $shellcheck tests/shell/test_arm_callgraph_fp.sh       $ echo $?       0 To address the POSIX shell warnings added changes to convert Lowercase signal names to uppercase in the script and double quoted the command substitutions($fix to "$fix") to solve Globbing warnings. Signed-off-by: Spoorthy S<spoorts2@in.ibm.com> Cc: Disha Goel <disgoel@linux.vnet.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20230613164145.50488-4-atrajeev@linux.vnet.ibm.com Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-13perf tests stat+json_output: Address shellcheck warningsDisha Goel
Running shellcheck on stat+json_output testcase, generates below warning: [ $(id -u) != 0 ] && [ $(cat /proc/sys/kernel/perf_event_paranoid) -gt $1 ] ^------^ SC2046 (warning): Quote this to prevent word splitting. ^-- SC2046 (warning): Quote this to prevent word splitting. Fixed the warning by adding quotes to avoid word splitting. ShellCheck result with patch: # shellcheck -S warning stat+json_output.sh # perf test result after the change: 94: perf stat JSON output linter : Ok Signed-off-by: Disha Goel <disgoel@linux.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/linux-perf-users/20230613164145.50488-3-atrajeev@linux.vnet.ibm.com Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-13perf python scripting: Get rid of unused import in arm-cs-trace-disasmSourabh Jain
The arm-cs-trace-disasm.py script doesn't use the sys library, so remove the import. Report by pylint: W0611: Unused import sys (unused-import) Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Disha Goel <disgoel@linux.vnet.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/linux-perf-users/20230613164145.50488-2-atrajeev@linux.vnet.ibm.com Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-13perf tool x86: Consolidate is_amd check into single functionRavi Bangoria
There are multiple places where x86 specific code determines AMD vs Intel arch and acts based on that. Consolidate those checks into a single function. Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ali Saidi <alisaidi@amazon.com> Cc: Ananth Narayan <ananth.narayan@amd.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Santosh Shukla <santosh.shukla@amd.com> Link: https://lore.kernel.org/r/20230613095506.547-3-ravi.bangoria@amd.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit (git 2.34.1) at 2025-07-16 12:28:42 +0000