| Age | Commit message (Collapse) | Author |
|---|
|
The number of online cpu may be not equal to possible cpu.
"bpftool prog profile" can not create pmu event on possible
but on online cpu.
$ dmidecode -s system-product-name
PowerEdge R620
$ cat /sys/devices/system/cpu/possible
0-47
$ cat /sys/devices/system/cpu/online
0-31
Disable cpu dynamically:
$ echo 0 > /sys/devices/system/cpu/cpuX/online
If one cpu is offline, perf_event_open will return ENODEV.
To fix this issue:
* check value returned and skip offline cpu.
* close pmu_fd immediately on error path, avoid fd leaking.
Fixes: 47c09d6a9f67 ("bpftool: Introduce "prog profile" command")
Signed-off-by: Tonghao Zhang <tong@infragraf.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Song Liu <song@kernel.org>
Cc: Yonghong Song <yhs@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20230202131701.29519-1-tong@infragraf.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
1st set of IIO new device support, features and cleanups for the 6.3 cycle
The usual mixed bag. So far this has been a quiet cycle for IIO.
New device support
* adi,ad8686
- Add support for the AD5337 DAC - ID and 8 bit channel support.
* maxim,max5522
- New driver for this 2 channel DAC.
* nxp,imx93-adc
- New driver for this SoC ADC which is a fresh IP that will probably
turn up in additional SoCs going forwards.
* st,magn
- Add support for magnetometer part of LSM303C which is very similar
to standalone LIS3MDL already supported.
* ti,ads7924
- New driver for this 4 channel, 12-bit I2C ADC.
* ti,lmp92064
- New driver for this 12 bit SPI ADC.
* ti,tmag5273
- New driver for this 3D Hall-Effect Sensor.
Features
* core
- Add a standard structure for the value pairs in IIO_VAL_INT_PLUS_MICRO
available attributes and similar.
* cirrus,ep93xx
- Add DT binding docs and convert driver to DT based probing.
- Enable testing building with CONFIG_COMPILE_TEST.
* st,stm32-dfsdm
- Enable ID register support for discovery of hardware capabilities on
some devices.
Cleanups and minor fixes
* core
- Drop the custom iio_sysfs_match_string_with_gaps().
The special ability of this function to skip gaps in an array
was never used by any upstream driver.
- Sort headers whilst touching this file.
* tools
- Fix memory leak in iio_utils.c
* various
- leftover i2c probe_new() conversions.
- scnprintf() -> sysfs_emit() cleanups.
- hand rolled devm enables -> devm_regulator[_bulk]_get_enable()
- typo fixes
- dt-binding cleanup (whitespace, excess quotes and similar)
* adi,ad7746
- Set variable without pointless conditional.
* fsl,mma9551
- Squash false positives about use of uninitialized variable where
garbage undergoes an endian conversion before being ignored.
* measspec,ms5611
- Switch to fully devm_ managed probe() and so drop explicit remove()
* qcom,spmi-adc
- Use dev_err_probe() to suppress deferred print.
* qcom,spmi-adc5
- Define a missing channel used for battery identification.
* qcom,spmi-iadc
- Document a compatible seen in wild.
* semtech,sx9360
- Fix units on semtech,resolution dt-binding.
* sensiron,scd30
- dev_err_probe() usage to simplify error paths a little.
* st,lsm6dsx
- Add missing mount matrix for the gyro IIO device.
* taos,tsl2563
- Respect firmware configured interrupt polarity if present.
- Use i2c_smbus_write_word_data() in a few cases not previously covered.
- Factor out duplicated interrupt configuration.
- Switch to GENMASK() / BIT() from hand coded equivalents.
- Tidy up unused definitions.
- Use dev_err_probe() as appropriate.
- Drop platform_data as no in kernel users and there are better ways to
do equivalent if any are added.
- Add local struct device variable to tidy up code.
- Avoid dance via i2c_client to get the drvdata.
- Tidy up headers ordering and Makefile ordering.
* ti,adc128s052
- Use new spi_get_device_match_data().
- Drop ACPI_PTR() protection.
- Sort headers whilst here.
- Use asm instead of incorrect include of asm-generic/unaligned.h
* vishay,vcn4000
- Interrupt support for vcnl4040 (lots of refactoring needed)
* xilinx,ams
- Use fwnode_device_is_compatible() instead of open coding it.
* tag 'iio-for-6.3a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (71 commits)
iio: adc: ad7291: Fix indentation error by adding extra spaces
iio: accel: mma9551_core: Prevent uninitialized variable in mma9551_read_config_word()
iio: accel: mma9551_core: Prevent uninitialized variable in mma9551_read_status_word()
dt-bindings: iio/proximity: semtech,sx9360: Fix 'semtech,resolution' type
iio: imu: fix spdx format
iio: adc: imx93: Fix spelling mistake "geting" -> "getting"
dt-bindings: iio: cleanup examples - indentation
dt-bindings: iio: use lowercase hex in examples
dt-bindings: iio: correct node names in examples
dt-bindings: iio: minor whitespace cleanups
dt-bindings: iio: drop unneeded quotes
dt-bindings: iio: adc: Add NXP IMX93 ADC
iio: adc: add imx93 adc support
dt-bindings: iio: adc: add Texas Instruments ADS7924
iio: adc: ti-ads7924: add Texas Instruments ADS7924 driver
iio: imu: st_lsm6dsx: add 'mount_matrix' sysfs entry to gyro channel.
iio: imu: st_lsm6dsx: fix naming of 'struct iio_info' in st_lsm6dsx_shub.c.
iio: light: vcnl4000: Add interrupt support for vcnl4040
iio: light: vcnl4000: Make irq handling more generic
iio: light: vcnl4000: Prepare for more generic setup
...
|
|
Introduce xdp_features tool in order to test XDP features supported by
the NIC and match them against advertised ones.
In order to test supported/advertised XDP features, xdp_features must
run on the Device Under Test (DUT) and on a Tester device.
xdp_features opens a control TCP channel between DUT and Tester devices
to send control commands from Tester to the DUT and a UDP data channel
where the Tester sends UDP 'echo' packets and the DUT is expected to
reply back with the same packet. DUT installs multiple XDP programs on the
NIC to test XDP capabilities and reports back to the Tester some XDP stats.
Currently xdp_features supports the following XDP features:
- XDP_DROP
- XDP_ABORTED
- XDP_PASS
- XDP_TX
- XDP_REDIRECT
- XDP_NDO_XMIT
Co-developed-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/7c1af8e7e6ef0614cf32fa9e6bdaa2d8d605f859.1675245258.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Introduce a self-test to verify libbpf bpf_xdp_query capability to dump
the xdp-features supported by the device (lo and veth in this case).
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/534550318a2c883e174811683909544c63632f05.1675245258.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Extend bpf_xdp_query routine in order to get XDP/XSK supported features
of netdev over route netlink interface.
Extend libbpf netlink implementation in order to support netlink_generic
protocol.
Co-developed-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Co-developed-by: Marek Majtyka <alardam@gmail.com>
Signed-off-by: Marek Majtyka <alardam@gmail.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/a72609ef4f0de7fee5376c40dbf54ad7f13bfb8d.1675245258.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This is a preliminary patch in order to introduce netlink_generic
protocol support to libbpf.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/7878a54667e74afeec3ee519999c044bd514b44c.1675245258.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a Netlink spec-compatible family for netdevs.
This is a very simple implementation without much
thought going into it.
It allows us to reap all the benefits of Netlink specs,
one can use the generic client to issue the commands:
$ ./cli.py --spec netdev.yaml --dump dev_get
[{'ifindex': 1, 'xdp-features': set()},
{'ifindex': 2, 'xdp-features': {'basic', 'ndo-xmit', 'redirect'}},
{'ifindex': 3, 'xdp-features': {'rx-sg'}}]
the generic python library does not have flags-by-name
support, yet, but we also don't have to carry strings
in the messages, as user space can get the names from
the spec.
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Co-developed-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Co-developed-by: Marek Majtyka <alardam@gmail.com>
Signed-off-by: Marek Majtyka <alardam@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/327ad9c9868becbe1e601b580c962549c8cd81f2.1675245258.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Just silence the following checkpatch warning:
WARNING: Possible comma where semicolon could be used
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/1675319486-27744-3-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Just silence the following build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/bpf.h' differs from latest version at 'include/uapi/linux/bpf.h'
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/1675319486-27744-2-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
xdp_synproxy/xdp fails in CI with:
Error: bpf_tc_hook_create: File exists
The XDP version of the test should not be calling bpf_tc_hook_create();
the reason it's happening anyway is that if we don't specify --tc on the
command line, tc variable remains uninitialized.
Fixes: 784d5dc0efc2 ("selftests/bpf: Add selftests for raw syncookie helpers in TC mode")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Reported-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230202235335.3403781-1-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
net/core/gro.c
7d2c89b32587 ("skb: Do mix page pool and page referenced frags in GRO")
b1a78b9b9886 ("net: add support for ipv4 big tcp")
https://lore.kernel.org/all/20230203094454.5766f160@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, can and netfilter.
Current release - regressions:
- phy: fix null-deref in phy_attach_direct
- mac802154: fix possible double free upon parsing error
Previous releases - regressions:
- bpf: preserve reg parent/live fields when copying range info,
prevent mis-verification of programs as safe
- ip6: fix GRE tunnels not generating IPv6 link local addresses
- phy: dp83822: fix null-deref on DP83825/DP83826 devices
- sctp: do not check hb_timer.expires when resetting hb_timer
- eth: mtk_sock: fix SGMII configuration after phylink conversion
Previous releases - always broken:
- eth: xdp: execute xdp_do_flush() before napi_complete_done()
- skb: do not mix page pool and page referenced frags in GRO
- bpf:
- fix a possible task gone issue with bpf_send_signal[_thread]()
- fix an off-by-one bug in bpf_mem_cache_idx() to select the right
cache
- add missing btf_put to register_btf_id_dtor_kfuncs
- sockmap: fon't let sock_map_{close,destroy,unhash} call itself
- gso: fix null-deref in skb_segment_list()
- mctp: purge receive queues on sk destruction
- fix UaF caused by accept on already connected socket in exotic
socket families
- tls: don't treat list head as an entry in tls_is_tx_ready()
- netfilter: br_netfilter: disable sabotage_in hook after first
suppression
- wwan: t7xx: fix runtime PM implementation
Misc:
- MAINTAINERS: spring cleanup of networking maintainers"
* tag 'net-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
mtk_sgmii: enable PCS polling to allow SFP work
net: mediatek: sgmii: fix duplex configuration
net: mediatek: sgmii: ensure the SGMII PHY is powered down on configuration
MAINTAINERS: update SCTP maintainers
MAINTAINERS: ipv6: retire Hideaki Yoshifuji
mailmap: add John Crispin's entry
MAINTAINERS: bonding: move Veaceslav Falico to CREDITS
net: openvswitch: fix flow memory leak in ovs_flow_cmd_new
net: ethernet: mtk_eth_soc: disable hardware DSA untagging for second MAC
virtio-net: Keep stop() to follow mirror sequence of open()
selftests: net: udpgso_bench_tx: Cater for pending datagrams zerocopy benchmarking
selftests: net: udpgso_bench: Fix racing bug between the rx/tx programs
selftests: net: udpgso_bench_rx/tx: Stop when wrong CLI args are provided
selftests: net: udpgso_bench_rx: Fix 'used uninitialized' compiler warning
can: mcp251xfd: mcp251xfd_ring_set_ringparam(): assign missing tx_obj_num_coalesce_irq
can: isotp: split tx timer into transmission and timeout
can: isotp: handle wait_event_interruptible() return values
can: raw: fix CAN FD frame transmissions over CAN XL devices
can: j1939: fix errant WARN_ON_ONCE in j1939_session_deactivate
hv_netvsc: Fix missed pagebuf entries in netvsc_dma_map/unmap()
...
|
|
Create a new pmu_metric for the metric related variables from pmu_event
but that is initially just a clone of pmu_event. Add iterators for
pmu_metric and use in places that metrics are desired rather than
events. Make the event iterator skip metric only events, and the metric
iterator skip event only events.
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230126233645.200509-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Rewrite metrics within the same file in terms of each other. For example, on Power8
other_stall_cpi is rewritten from:
"PM_CMPLU_STALL / PM_RUN_INST_CMPL - PM_CMPLU_STALL_BRU_CRU / PM_RUN_INST_CMPL - PM_CMPLU_STALL_FXU / PM_RUN_INST_CMPL - PM_CMPLU_STALL_VSU / PM_RUN_INST_CMPL - PM_CMPLU_STALL_LSU / PM_RUN_INST_CMPL - PM_CMPLU_STALL_NTCG_FLUSH / PM_RUN_INST_CMPL - PM_CMPLU_STALL_NO_NTF / PM_RUN_INST_CMPL"
to:
"stall_cpi - bru_cru_stall_cpi - fxu_stall_cpi - vsu_stall_cpi - lsu_stall_cpi - ntcg_flush_cpi - no_ntf_stall_cpi"
Which more closely matches the definition on Power9.
To avoid recomputation decorate the function with a cache.
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230126233645.200509-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add RewriteMetricsInTermsOfOthers that iterates over pairs of names and
expressions trying to replace an expression, within the current
expression, with its name.
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230126233645.200509-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
rhs may not be defined, say for source_count, so add a guard.
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230126233645.200509-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Show the branch speculation info if provided by the branch recording
hardware feature. This can be useful for purposes of code optimization.
E.g.
$ perf record -j any,u ./test_branch
$ perf report --dump-raw-trace
Before:
[...]
8380958377610 0x40b178 [0x1b0]: PERF_RECORD_SAMPLE(IP, 0x2): 7952/7952: 0x4f851a period: 48973 addr: 0
... branch stack: nr:16
..... 0: 00000000004b52fd -> 00000000004f82c0 0 cycles P 0
..... 1: ffffffff8220137c -> 00000000004b52f0 0 cycles M 0
..... 2: 000000000041d1c4 -> 00000000004b52f0 0 cycles P 0
..... 3: 00000000004e7ead -> 000000000041d1b0 0 cycles M 0
..... 4: 00000000004e7f91 -> 00000000004e7ead 0 cycles P 0
..... 5: 00000000004e7ea8 -> 00000000004e7f70 0 cycles P 0
..... 6: 00000000004e7e52 -> 00000000004e7e98 0 cycles M 0
..... 7: 00000000004e7e1f -> 00000000004e7e40 0 cycles M 0
..... 8: 00000000004e7f60 -> 00000000004e7df0 0 cycles P 0
..... 9: 00000000004e7f58 -> 00000000004e7f60 0 cycles M 0
..... 10: 000000000041d85d -> 00000000004e7f50 0 cycles P 0
..... 11: 000000000043306a -> 000000000041d840 0 cycles P 0
..... 12: ffffffff8220137c -> 0000000000433040 0 cycles M 0
..... 13: 000000000041e4a1 -> 0000000000433040 0 cycles P 0
..... 14: ffffffff8220137c -> 000000000041e490 0 cycles M 0
..... 15: 000000000041d89b -> 000000000041e487 0 cycles P 0
... thread: test_branch:7952
...... dso: /data/sandipan/test_branch
[...]
After:
[...]
8380958377610 0x40b178 [0x1b0]: PERF_RECORD_SAMPLE(IP, 0x2): 7952/7952: 0x4f851a period: 48973 addr: 0
... branch stack: nr:16
..... 0: 00000000004b52fd -> 00000000004f82c0 0 cycles P 0 NON_SPEC_CORRECT_PATH
..... 1: ffffffff8220137c -> 00000000004b52f0 0 cycles M 0 NON_SPEC_CORRECT_PATH
..... 2: 000000000041d1c4 -> 00000000004b52f0 0 cycles P 0 NON_SPEC_CORRECT_PATH
..... 3: 00000000004e7ead -> 000000000041d1b0 0 cycles M 0 NON_SPEC_CORRECT_PATH
..... 4: 00000000004e7f91 -> 00000000004e7ead 0 cycles P 0 NON_SPEC_CORRECT_PATH
..... 5: 00000000004e7ea8 -> 00000000004e7f70 0 cycles P 0 NON_SPEC_CORRECT_PATH
..... 6: 00000000004e7e52 -> 00000000004e7e98 0 cycles M 0 SPEC_CORRECT_PATH
..... 7: 00000000004e7e1f -> 00000000004e7e40 0 cycles M 0 NON_SPEC_CORRECT_PATH
..... 8: 00000000004e7f60 -> 00000000004e7df0 0 cycles P 0 NON_SPEC_CORRECT_PATH
..... 9: 00000000004e7f58 -> 00000000004e7f60 0 cycles M 0 NON_SPEC_CORRECT_PATH
..... 10: 000000000041d85d -> 00000000004e7f50 0 cycles P 0 NON_SPEC_CORRECT_PATH
..... 11: 000000000043306a -> 000000000041d840 0 cycles P 0 NON_SPEC_CORRECT_PATH
..... 12: ffffffff8220137c -> 0000000000433040 0 cycles M 0 NON_SPEC_CORRECT_PATH
..... 13: 000000000041e4a1 -> 0000000000433040 0 cycles P 0 NON_SPEC_CORRECT_PATH
..... 14: ffffffff8220137c -> 000000000041e490 0 cycles M 0 NON_SPEC_CORRECT_PATH
..... 15: 000000000041d89b -> 000000000041e487 0 cycles P 0 NON_SPEC_CORRECT_PATH
... thread: test_branch:7952
...... dso: /data/sandipan/test_branch
[...]
With the addition of new branch flags, the "brstacksym" fields in perf
script output now shows speculation information after the branch type.
Change the regular expressions accordingly for the test to pass. Since
branch speculation information may vary across platforms, the test does
not look for specific values.
E.g.
$ perf test -v 110
Before:
110: Check branch stack sampling :
--- start ---
test child forked, pid 54154
Testing user branch stack sampling
+ grep -E -m1 ^brstack_bench\+[^ ]*/brstack_foo\+[^ ]*/IND_CALL$ /tmp/__perf_test.program.AfhUI/perf.script
+ cleanup
+ rm -rf /tmp/__perf_test.program.AfhUI
test child finished with -1
---- end ----
Check branch stack sampling: FAILED!
After:
110: Check branch stack sampling :
--- start ---
test child forked, pid 43716
Testing user branch stack sampling
+ grep -E -m1 ^brstack_bench\+[^ ]*/brstack_foo\+[^ ]*/IND_CALL/.*$ /tmp/__perf_test.program.xgzAi/perf.script
brstack_bench+0x66/brstack_foo+0x0/P/-/-/0/IND_CALL/NON_SPEC_CORRECT_PATH
+ grep -E -m1 ^brstack_foo\+[^ ]*/brstack_bar\+[^ ]*/CALL/.*$ /tmp/__perf_test.program.xgzAi/perf.script
brstack_foo+0x1b/brstack_bar+0x0/P/-/-/0/CALL/NON_SPEC_CORRECT_PATH
+ grep -E -m1 ^brstack_bench\+[^ ]*/brstack_foo\+[^ ]*/CALL/.*$ /tmp/__perf_test.program.xgzAi/perf.script
brstack_bench+0x58/brstack_foo+0x0/P/-/-/0/CALL/NON_SPEC_CORRECT_PATH
+ grep -E -m1 ^brstack_bench\+[^ ]*/brstack_bar\+[^ ]*/CALL/.*$ /tmp/__perf_test.program.xgzAi/perf.script
brstack_bench+0x5d/brstack_bar+0x0/P/-/-/0/CALL/NON_SPEC_CORRECT_PATH
+ grep -E -m1 ^brstack_bar\+[^ ]*/brstack_foo\+[^ ]*/RET/.*$ /tmp/__perf_test.program.xgzAi/perf.script
brstack_bar+0x31/brstack_foo+0x20/P/-/-/0/RET/NON_SPEC_CORRECT_PATH
+ grep -E -m1 ^brstack_foo\+[^ ]*/brstack_bench\+[^ ]*/RET/.*$ /tmp/__perf_test.program.xgzAi/perf.script
brstack_foo+0x36/brstack_bench+0x5d/P/-/-/0/RET/NON_SPEC_CORRECT_PATH
+ grep -E -m1 ^brstack_bench\+[^ ]*/brstack_bench\+[^ ]*/COND/.*$ /tmp/__perf_test.program.xgzAi/perf.script
brstack_bench+0x76/brstack_bench+0x7d/P/-/-/0/COND/NON_SPEC_CORRECT_PATH
+ grep -E -m1 ^brstack\+[^ ]*/brstack\+[^ ]*/UNCOND/.*$ /tmp/__perf_test.program.xgzAi/perf.script
brstack+0x5a/brstack+0x41/P/-/-/0/UNCOND/NON_SPEC_CORRECT_PATH
+ set +x
Testing branch stack filtering permutation (any_call,CALL|IND_CALL|COND_CALL|SYSCALL|IRQ)
Testing branch stack filtering permutation (call,CALL|SYSCALL)
Testing branch stack filtering permutation (cond,COND)
Testing branch stack filtering permutation (any_ret,RET|COND_RET|SYSRET|ERET)
Testing branch stack filtering permutation (call,cond,CALL|SYSCALL|COND)
Testing branch stack filtering permutation (any_call,cond,CALL|IND_CALL|COND_CALL|IRQ|SYSCALL|COND)
Testing branch stack filtering permutation (cond,any_call,any_ret,COND|CALL|IND_CALL|COND_CALL|SYSCALL|IRQ|RET|COND_RET|SYSRET|ERET)
test child finished with 0
---- end ----
Check branch stack sampling: Ok
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: x86@kernel.org
Link: https://lore.kernel.org/r/048d67c9de3cc8e3dbf19aaa7ff718dec91364c5.1675333809.git.sandipan.das@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Show the branch speculation info if provided by the branch recording
hardware feature. This can be useful for optimizing code further.
The speculation info is appended to the end of the list of fields so any
existing tools that use "/" as a delimiter for access fields via an index
remain unaffected. Also show "-" instead of "N/A" when speculation info
is unavailable because "/" is used as the field separator.
E.g.
$ perf record -j any,u,save_type ./test_branch
$ perf script --fields brstacksym
Before:
[...]
check_match+0x60/strcmp+0x0/P/-/-/0/CALL
do_lookup_x+0x3c5/check_match+0x0/P/-/-/0/CALL
[...]
After:
[...]
check_match+0x60/strcmp+0x0/P/-/-/0/CALL/NON_SPEC_CORRECT_PATH
do_lookup_x+0x3c5/check_match+0x0/P/-/-/0/CALL/NON_SPEC_CORRECT_PATH
[...]
The bitfield swapping scheme used duing sample parsing has changed
because of the addition of new branch flags, namely "spec", "new_type"
and "priv". Earlier, these were all part of the "reserved" field but
now, each of these fields get swapped separately. Change the expected
flag values accordingly for the test to pass.
E.g.
$ perf test -v 27
Before:
27: Sample parsing :
--- start ---
test child forked, pid 61979
parsing failed for sample_type 0x800
test child finished with -1
---- end ----
Sample parsing: FAILED!
After:
27: Sample parsing :
--- start ---
test child forked, pid 63293
test child finished with 0
---- end ----
Sample parsing: Ok
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: x86@kernel.org
Link: https://lore.kernel.org/r/56e272583552526e999ba0b536ac009ae3613966.1675333809.git.sandipan.das@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Check callstack filter with two different aggregation mode.
$ sudo ./perf test -v contention
88: kernel lock contention analysis test :
--- start ---
test child forked, pid 83416
Testing perf lock record and perf lock contention
Testing perf lock contention --use-bpf
Testing perf lock record and perf lock contention at the same time
Testing perf lock contention --threads
Testing perf lock contention --lock-addr
Testing perf lock contention --type-filter (w/ spinlock)
Testing perf lock contention --lock-filter (w/ tasklist_lock)
Testing perf lock contention --callstack-filter (w/ unix_stream)
Testing perf lock contention --callstack-filter with task aggregation
test child finished with 0
---- end ----
kernel lock contention analysis test: Ok
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230202050455.2187592-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This commit adds the execve syscall benchmark, more syscall benchmarks
can be added in the future.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/1668052208-14047-5-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This commit adds a simple getpgid syscall benchmark, more syscall
benchmarks can be added in the future.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/1668052208-14047-4-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In the current code, there is only a basic syscall benchmark via
getppid, this is not enough. Introduce bench_syscall_common() so that we
can add more syscalls to benchmark.
This is preparation for later patch, no functionality change.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/1668052208-14047-3-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It is better to keep list sorted by number in unistd_{32,64}.h,
so that we can add more syscall number to a proper position.
This is preparation for later patch, no functionality change.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/1668052208-14047-2-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
As detailed in https://www.shellcheck.net/wiki/SC2006:
The use of `...` is legacy syntax with several issues:
1. It has a series of undefined behaviors related to quoting in POSIX.
2. It imposes a custom escaping mode with surprising results.
3. It's exceptionally hard to nest.
$(...) command substitution has none of these problems,
and is therefore strongly encouraged.
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Acked-by: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230201214945.127474-3-didi.debian@cknow.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To count the number of results from grep, use the '-c' parameter
instead of piping it to 'wc'.
See also https://www.shellcheck.net/wiki/SC2126
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Acked-by: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230201214945.127474-2-didi.debian@cknow.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The current display code for perf stat iterates given cpus and build the
aggr map to collect the event data for the aggregation mode.
But uncore events have their own cpu maps and it won't guarantee that
it'd match to the aggr map. For example, per-package uncore events
would generate a single value for each socket. When user asks per-core
aggregation mode, the output would contain 0 values for other cores.
Thus it needs to check the uncore PMU's cpumask and if it matches to the
current aggregation id.
Before:
$ sudo ./perf stat -a --per-core -e power/energy-pkg/ sleep 1
Performance counter stats for 'system wide':
S0-D0-C0 1 3.73 Joules power/energy-pkg/
S0-D0-C1 0 <not counted> Joules power/energy-pkg/
S0-D0-C2 0 <not counted> Joules power/energy-pkg/
S0-D0-C3 0 <not counted> Joules power/energy-pkg/
1.001404046 seconds time elapsed
Some events weren't counted. Try disabling the NMI watchdog:
echo 0 > /proc/sys/kernel/nmi_watchdog
perf stat ...
echo 1 > /proc/sys/kernel/nmi_watchdog
The core 1, 2 and 3 should not be printed because the event is handled
in a cpu in the core 0 only. With this change, the output becomes like
below.
After:
$ sudo ./perf stat -a --per-core -e power/energy-pkg/ sleep 1
Performance counter stats for 'system wide':
S0-D0-C0 1 2.09 Joules power/energy-pkg/
Fixes: b897613510890d6e ("perf stat: Update event skip condition for system-wide per-thread mode and merged uncore and hybrid events")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Ian Rogers <irogers@google.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230125192431.2929677-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The -S/--callstack-filter is to limit display entries having the given
string in the callstack (not only in the caller in the output).
The following example shows lock contention results if the callstack
has 'net' substring somewhere. Note that the caller '__dev_queue_xmit'
does not match to it, but it has 'inet6_csk_xmit' in the callstack.
This applies even if you don't use -v option to show the full callstack.
$ sudo ./perf lock con -abv -S net sleep 1
...
contended total wait max wait avg wait type caller
5 70.20 us 16.13 us 14.04 us spinlock __dev_queue_xmit+0xb6d
0xffffffffa5dd1c60 _raw_spin_lock+0x30
0xffffffffa5b8f6ed __dev_queue_xmit+0xb6d
0xffffffffa5cd8267 ip6_finish_output2+0x2c7
0xffffffffa5cdac14 ip6_finish_output+0x1d4
0xffffffffa5cdb477 ip6_xmit+0x457
0xffffffffa5d1fd17 inet6_csk_xmit+0xd7
0xffffffffa5c5f4aa __tcp_transmit_skb+0x54a
0xffffffffa5c6467d tcp_keepalive_timer+0x2fd
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230126000936.3017683-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
There's no field for the cgroup, let's add one. To do that, users need to
specify --all-cgroup option for perf record to capture the cgroup info.
$ perf record --all-cgroups -- true
$ perf script -F comm,pid,cgroup
true 337112 /user.slice/user-657345.slice/user@657345.service/...
true 337112 /user.slice/user-657345.slice/user@657345.service/...
true 337112 /user.slice/user-657345.slice/user@657345.service/...
true 337112 /user.slice/user-657345.slice/user@657345.service/...
If it's recorded without the --all-cgroups, it'd complain.
$ perf script -F comm,pid,cgroup
Samples for 'cycles:u' event do not have CGROUP attribute set. Cannot print 'cgroup' field.
Hint: run 'perf record --all-cgroups ...'
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20230126213610.3381147-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The canonical location for the tracefs filesystem is at /sys/kernel/tracing.
But, from Documentation/trace/ftrace.rst:
Before 4.1, all ftrace tracing control files were within the debugfs
file system, which is typically located at /sys/kernel/debug/tracing.
For backward compatibility, when mounting the debugfs file system,
the tracefs file system will be automatically mounted at:
/sys/kernel/debug/tracing
A few spots in the perf docs still refer to this older debugfs path, so
let's update them to avoid confusion.
Signed-off-by: Ross Zwisler <zwisler@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: linux-trace-kernel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20230130181915.1113313-5-zwisler@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Unknown address packet indexes are not an error as the Arm architecture
can (and has with SPEv1.2) define new ones and implementation defined
ones are also allowed. The error message for every occurrence of the
packet is needlessly noisy as well. Change the message to print just
once for each unknown index.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230127205546.667740-1-robh@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This problem was encountered on an arm64 system with a lot of memory.
Without kernel debug symbols installed, and with both kcore and kallsyms
available, perf managed to get confused and returned "unknown" for all
of the kernel symbols that it tried to look up.
On this system, stext fell within the vmalloc segment. The kcore symbol
matching code tries to find the first segment that contains stext and
uses that to replace the segment generated from just the kallsyms
information. In this case, however, there were two: a very large
vmalloc segment, and the text segment. This caused perf to get confused
because multiple overlapping segments were inserted into the RB tree
that holds the discovered segments. However, that alone wasn't
sufficient to cause the problem. Even when we could find the segment,
the offsets were adjusted in such a way that the newly generated symbols
didn't line up with the instruction addresses in the trace. The most
obvious solution would be to consult which segment type is text from
kcore, but this information is not exposed to users.
Instead, select the smallest matching segment that contains stext
instead of the first matching segment. This allows us to match the text
segment instead of vmalloc, if one is contained within the other.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Reaver <me@davidreaver.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20230125183418.GD1963@templeofstupid.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
While parsing the tracepoint events in parse_events_add_tracepoint()
function, code checks for HAVE_LIBTRACEEVENT support. This is needed
since libtraceevent is necessary for tracepoint. But while adding probe
points, check for LIBTRACEEVENT is not done in case of perf probe.
Hence, in environment with missing libtraceevent-devel, it is observed
that adding a probe point shows below message though it can't be used
via perf record.
Example:
Adding probe point:
./perf probe 'vfs_getname=getname_flags:72 pathname=result->name:string'
Added new event:
probe:vfs_getname (on getname_flags:72 with pathname=result->name:string)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_getname -aR sleep 1
But trying perf record:
./perf record -e probe:vfs_getname -aR sleep 1
event syntax error: 'probe:vfs_getname'
\___ unsupported tracepoint
libtraceevent is necessary for tracepoint support
Run 'perf list' for a list of valid events
The builtin tool like perf record needs libtraceevent to
parse tracefs. But still the probe can be used by enabling
via tracefs. Patch fixes the probe usage message to the user
based on presence of libtraceevent. With the fix,
# ./perf probe 'pmu:myprobe=schedule'
Added new event:
pmu:myprobe (on schedule)
perf is not linked with libtraceevent, to use the new probe you can use tracefs:
cd /sys/kernel/tracing/
echo 1 > events/pmu/myprobe/enable
echo 1 > tracing_on
cat trace_pipe
Before removing the probe, echo 0 > events/pmu/myprobe/enable
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230131134748.54567-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
For x86_64, determine a symbol for .plt.got entries. That requires
computing the target offset and finding that in .rela.dyn, which in
turn means .rela.dyn needs to be sorted by offset.
Example:
In this example, the GNU C Library is using .plt.got for malloc and
free.
Before:
$ gcc --version
gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0
Copyright (C) 2021 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
$ perf record -e intel_pt//u uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.027 MB perf.data ]
$ perf script --itrace=be --ns -F-event,+addr,-period,-comm,-tid,-cpu > /tmp/cmp1.txt
After:
$ perf script --itrace=be --ns -F-event,+addr,-period,-comm,-tid,-cpu > /tmp/cmp2.txt
$ diff /tmp/cmp1.txt /tmp/cmp2.txt | head -12
15509,15510c15509,15510
< 27046.755390907: 7f0b2943e3ab _nl_normalize_codeset+0x5b (/usr/lib/x86_64-linux-gnu/libc.so.6) => 7f0b29428380 offset_0x28380@plt+0x0 (/usr/lib/x86_64-linux-gnu/libc.so.6)
< 27046.755390907: 7f0b29428384 offset_0x28380@plt+0x4 (/usr/lib/x86_64-linux-gnu/libc.so.6) => 7f0b294a5120 malloc+0x0 (/usr/lib/x86_64-linux-gnu/libc.so.6)
---
> 27046.755390907: 7f0b2943e3ab _nl_normalize_codeset+0x5b (/usr/lib/x86_64-linux-gnu/libc.so.6) => 7f0b29428380 malloc@plt+0x0 (/usr/lib/x86_64-linux-gnu/libc.so.6)
> 27046.755390907: 7f0b29428384 malloc@plt+0x4 (/usr/lib/x86_64-linux-gnu/libc.so.6) => 7f0b294a5120 malloc+0x0 (/usr/lib/x86_64-linux-gnu/libc.so.6)
15821,15822c15821,15822
< 27046.755394865: 7f0b2943850c _nl_load_locale_from_archive+0x5bc (/usr/lib/x86_64-linux-gnu/libc.so.6) => 7f0b29428370 offset_0x28370@plt+0x0 (/usr/lib/x86_64-linux-gnu/libc.so.6)
< 27046.755394865: 7f0b29428374 offset_0x28370@plt+0x4 (/usr/lib/x86_64-linux-gnu/libc.so.6) => 7f0b294a5460 cfree@GLIBC_2.2.5+0x0 (/usr/lib/x86_64-linux-gnu/libc.so.6)
---
> 27046.755394865: 7f0b2943850c _nl_load_locale_from_archive+0x5bc (/usr/lib/x86_64-linux-gnu/libc.so.6) => 7f0b29428370 free@plt+0x0 (/usr/lib/x86_64-linux-gnu/libc.so.6)
> 27046.755394865: 7f0b29428374 free@plt+0x4 (/usr/lib/x86_64-linux-gnu/libc.so.6) => 7f0b294a5460 cfree@GLIBC_2.2.5+0x0 (/usr/lib/x86_64-linux-gnu/libc.so.6)
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230131131625.6964-10-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
For x86, .plt.got is used, for example, when the address is taken of a
dynamically linked function. Start adding support by synthesizing a
symbol for each entry. A subsequent patch will attempt to get a better
name for the symbol.
Example:
Before:
$ cat tstpltlib.c
void fn1(void) {}
void fn2(void) {}
void fn3(void) {}
void fn4(void) {}
$ cat tstpltgot.c
void fn1(void);
void fn2(void);
void fn3(void);
void fn4(void);
void callfn(void (*fn)(void))
{
fn();
}
int main()
{
fn4();
fn1();
callfn(fn3);
fn2();
fn3();
return 0;
}
$ gcc --version
gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0
Copyright (C) 2021 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
$ gcc -Wall -Wextra -shared -o libtstpltlib.so tstpltlib.c
$ gcc -Wall -Wextra -o tstpltgot tstpltgot.c -L . -ltstpltlib -Wl,-rpath="$(pwd)"
$ readelf -SW tstpltgot | grep 'Name\|plt\|dyn'
[Nr] Name Type Address Off Size ES Flg Lk Inf Al
[ 6] .dynsym DYNSYM 00000000000003d8 0003d8 0000f0 18 A 7 1 8
[ 7] .dynstr STRTAB 00000000000004c8 0004c8 0000c6 00 A 0 0 1
[10] .rela.dyn RELA 00000000000005d8 0005d8 0000d8 18 A 6 0 8
[11] .rela.plt RELA 00000000000006b0 0006b0 000048 18 AI 6 24 8
[13] .plt PROGBITS 0000000000001020 001020 000040 10 AX 0 0 16
[14] .plt.got PROGBITS 0000000000001060 001060 000020 10 AX 0 0 16
[15] .plt.sec PROGBITS 0000000000001080 001080 000030 10 AX 0 0 16
[23] .dynamic DYNAMIC 0000000000003d90 002d90 000210 10 WA 7 0 8
$ perf record -e intel_pt//u --filter 'filter main @ ./tstpltgot , filter callfn @ ./tstpltgot' ./tstpltgot
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.011 MB perf.data ]
$ perf script --itrace=be --ns -F+flags,-event,+addr,-period,-comm,-tid,-cpu,-dso
28393.810326915: tr strt 0 [unknown] => 562350baa1b2 main+0x0
28393.810326915: tr end call 562350baa1ba main+0x8 => 562350baa090 fn4@plt+0x0
28393.810326917: tr strt 0 [unknown] => 562350baa1bf main+0xd
28393.810326917: tr end call 562350baa1bf main+0xd => 562350baa080 fn1@plt+0x0
28393.810326917: tr strt 0 [unknown] => 562350baa1c4 main+0x12
28393.810326917: call 562350baa1ce main+0x1c => 562350baa199 callfn+0x0
28393.810326917: tr end call 562350baa1ad callfn+0x14 => 7f607d36110f fn3+0x0
28393.810326922: tr strt 0 [unknown] => 562350baa1af callfn+0x16
28393.810326922: return 562350baa1b1 callfn+0x18 => 562350baa1d3 main+0x21
28393.810326922: tr end call 562350baa1d3 main+0x21 => 562350baa0a0 fn2@plt+0x0
28393.810326924: tr strt 0 [unknown] => 562350baa1d8 main+0x26
28393.810326924: tr end call 562350baa1d8 main+0x26 => 562350baa060 [unknown] <- call to fn3 via .plt.got
28393.810326925: tr strt 0 [unknown] => 562350baa1dd main+0x2b
28393.810326925: tr end return 562350baa1e3 main+0x31 => 7f607d029d90 __libc_start_call_main+0x80
After:
$ perf script --itrace=be --ns -F+flags,-event,+addr,-period,-comm,-tid,-cpu,-dso
28393.810326915: tr strt 0 [unknown] => 562350baa1b2 main+0x0
28393.810326915: tr end call 562350baa1ba main+0x8 => 562350baa090 fn4@plt+0x0
28393.810326917: tr strt 0 [unknown] => 562350baa1bf main+0xd
28393.810326917: tr end call 562350baa1bf main+0xd => 562350baa080 fn1@plt+0x0
28393.810326917: tr strt 0 [unknown] => 562350baa1c4 main+0x12
28393.810326917: call 562350baa1ce main+0x1c => 562350baa199 callfn+0x0
28393.810326917: tr end call 562350baa1ad callfn+0x14 => 7f607d36110f fn3+0x0
28393.810326922: tr strt 0 [unknown] => 562350baa1af callfn+0x16
28393.810326922: return 562350baa1b1 callfn+0x18 => 562350baa1d3 main+0x21
28393.810326922: tr end call 562350baa1d3 main+0x21 => 562350baa0a0 fn2@plt+0x0
28393.810326924: tr strt 0 [unknown] => 562350baa1d8 main+0x26
28393.810326924: tr end call 562350baa1d8 main+0x26 => 562350baa060 offset_0x1060@plt+0x0
28393.810326925: tr strt 0 [unknown] => 562350baa1dd main+0x2b
28393.810326925: tr end return 562350baa1e3 main+0x31 => 7f607d029d90 __libc_start_call_main+0x80
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230131131625.6964-9-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently, timerlat top displays the timerlat tracer latency results, saving
the intuitive timerlat trace for the developer to analyze.
This patch goes a step forward in the automaton of the scheduling latency
analysis by providing a summary of the root cause of a latency higher than
the passed "stop tracing" parameter if the trace stops.
The output is intuitive enough for non-expert users to have a general idea
of the root cause by looking at each factor's contribution percentage while
keeping the technical detail in the output for more expert users to start
an in dept debug or to correlate a root cause with an existing one.
The terminology is in line with recent industry and academic publications
to facilitate the understanding of both audiences.
Here is one example of tool output:
----------------------------------------- %< -----------------------------------------------------
# taskset -c 0 timerlat -a 40 -c 1-23 -q
Timer Latency
0 00:00:12 | IRQ Timer Latency (us) | Thread Timer Latency (us)
CPU COUNT | cur min avg max | cur min avg max
1 #12322 | 0 0 1 15 | 10 3 9 31
2 #12322 | 3 0 1 12 | 10 3 9 23
3 #12322 | 1 0 1 21 | 8 2 8 34
4 #12322 | 1 0 1 17 | 10 2 11 33
5 #12322 | 0 0 1 12 | 8 3 8 25
6 #12322 | 1 0 1 14 | 16 3 11 35
7 #12322 | 0 0 1 14 | 9 2 8 29
8 #12322 | 1 0 1 22 | 9 3 9 34
9 #12322 | 0 0 1 14 | 8 2 8 24
10 #12322 | 1 0 0 12 | 9 3 8 24
11 #12322 | 0 0 0 15 | 6 2 7 29
12 #12321 | 1 0 0 13 | 5 3 8 23
13 #12319 | 0 0 1 14 | 9 3 9 26
14 #12321 | 1 0 0 13 | 6 2 8 24
15 #12321 | 1 0 1 15 | 12 3 11 27
16 #12318 | 0 0 1 13 | 7 3 10 24
17 #12319 | 0 0 1 13 | 11 3 9 25
18 #12318 | 0 0 0 12 | 8 2 8 20
19 #12319 | 0 0 1 18 | 10 2 9 28
20 #12317 | 0 0 0 20 | 9 3 8 34
21 #12318 | 0 0 0 13 | 8 3 8 28
22 #12319 | 0 0 1 11 | 8 3 10 22
23 #12320 | 28 0 1 28 | 41 3 11 41
rtla timerlat hit stop tracing
## CPU 23 hit stop tracing, analyzing it ##
IRQ handler delay: 27.49 us (65.52 %)
IRQ latency: 28.13 us
Timerlat IRQ duration: 9.59 us (22.85 %)
Blocking thread: 3.79 us (9.03 %)
objtool:49256 3.79 us
Blocking thread stacktrace
-> timerlat_irq
-> __hrtimer_run_queues
-> hrtimer_interrupt
-> __sysvec_apic_timer_interrupt
-> sysvec_apic_timer_interrupt
-> asm_sysvec_apic_timer_interrupt
-> _raw_spin_unlock_irqrestore
-> cgroup_rstat_flush_locked
-> cgroup_rstat_flush_irqsafe
-> mem_cgroup_flush_stats
-> mem_cgroup_wb_stats
-> balance_dirty_pages
-> balance_dirty_pages_ratelimited_flags
-> btrfs_buffered_write
-> btrfs_do_write_iter
-> vfs_write
-> __x64_sys_pwrite64
-> do_syscall_64
-> entry_SYSCALL_64_after_hwframe
------------------------------------------------------------------------
Thread latency: 41.96 us (100%)
The system has exit from idle latency!
Max timerlat IRQ latency from idle: 17.48 us in cpu 4
Saving trace to timerlat_trace.txt
----------------------------------------- >% -----------------------------------------------------
In this case, the major factor was the delay suffered by the IRQ handler
that handles timerlat wakeup: 65.52 %. This can be caused by the
current thread masking interrupts, which can be seen in the blocking
thread stacktrace: the current thread (objtool:49256) disabled interrupts
via raw spin lock operations inside mem cgroup, while doing write
syscall in a btrfs file system.
A simple search for the function name on Google shows that this is
a legit case for disabling the interrupts:
cgroup: Use irqsave in cgroup_rstat_flush_locked()
lore.kernel.org/linux-mm/20220301122143.1521823-2-bigeasy@linutronix.de/
The output also prints other reasons for the latency root cause, such as:
- an IRQ that happened before the IRQ handler that caused delays
- The interference from NMI, IRQ, Softirq, and Threads
The details about how these factors affect the scheduling latency
can be found here:
https://bristot.me/demystifying-the-real-time-linux-latency/
Link: https://lkml.kernel.org/r/3d45f40e630317f51ac6d678e2d96d310e495729.1675179318.git.bristot@kernel.org
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Currently, timerlat displays a summary of the timerlat tracer results
saving the trace if the system hits a stop condition.
While this represented a huge step forward, the root cause was not
that is accessible to non-expert users.
The auto-analysis fulfill this gap by parsing the trace timerlat runs,
printing an intuitive auto-analysis.
Link: https://lkml.kernel.org/r/1ee073822f6a2cbb33da0c817331d0d4045e837f.1675179318.git.bristot@kernel.org
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The canonical location for the tracefs filesystem is at /sys/kernel/tracing.
But, from Documentation/trace/ftrace.rst:
Before 4.1, all ftrace tracing control files were within the debugfs
file system, which is typically located at /sys/kernel/debug/tracing.
For backward compatibility, when mounting the debugfs file system,
the tracefs file system will be automatically mounted at:
/sys/kernel/debug/tracing
A few scripts in tools/power still refer to this older debugfs path, so
let's update them to avoid confusion.
Signed-off-by: Ross Zwisler <zwisler@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
benchmarking
The test tool can check that the zerocopy number of completions value is
valid taking into consideration the number of datagram send calls. This can
catch the system into a state where the datagrams are still in the system
(for example in a qdisk, waiting for the network interface to return a
completion notification, etc).
This change adds a retry logic of computing the number of completions up to
a configurable (via CLI) timeout (default: 2 seconds).
Fixes: 79ebc3c26010 ("net/udpgso_bench_tx: options to exercise TX CMSG")
Signed-off-by: Andrei Gherzan <andrei.gherzan@canonical.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230201001612.515730-4-andrei.gherzan@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
"udpgro_bench.sh" invokes udpgso_bench_rx/udpgso_bench_tx programs
subsequently and while doing so, there is a chance that the rx one is not
ready to accept socket connections. This racing bug could fail the test
with at least one of the following:
./udpgso_bench_tx: connect: Connection refused
./udpgso_bench_tx: sendmsg: Connection refused
./udpgso_bench_tx: write: Connection refused
This change addresses this by making udpgro_bench.sh wait for the rx
program to be ready before firing off the tx one - up to a 10s timeout.
Fixes: 3a687bef148d ("selftests: udp gso benchmark")
Signed-off-by: Andrei Gherzan <andrei.gherzan@canonical.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Willem de Bruijn <willemb@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230201001612.515730-3-andrei.gherzan@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Leaving unrecognized arguments buried in the output, can easily hide a
CLI/script typo. Avoid this by exiting when wrong arguments are provided to
the udpgso_bench test programs.
Fixes: 3a687bef148d ("selftests: udp gso benchmark")
Signed-off-by: Andrei Gherzan <andrei.gherzan@canonical.com>
Cc: Willem de Bruijn <willemb@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230201001612.515730-2-andrei.gherzan@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This change fixes the following compiler warning:
/usr/include/x86_64-linux-gnu/bits/error.h:40:5: warning: ‘gso_size’ may
be used uninitialized [-Wmaybe-uninitialized]
40 | __error_noreturn (__status, __errnum, __format,
__va_arg_pack ());
|
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
udpgso_bench_rx.c: In function ‘main’:
udpgso_bench_rx.c:253:23: note: ‘gso_size’ was declared here
253 | int ret, len, gso_size, budget = 256;
Fixes: 3327a9c46352 ("selftests: add functionals test for UDP GRO")
Signed-off-by: Andrei Gherzan <andrei.gherzan@canonical.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230201001612.515730-1-andrei.gherzan@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The linux/net_tstamp.h is included more than once, thus clean it up.
Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/202301311440516312161@zte.com.cn
|
|
We only need to consume TX completion instead of refilling 'fill' ring.
It's currently not an issue because we never RX more than 8 packets.
Fixes: e2a46d54d7a1 ("selftests/bpf: Verify xdp_metadata xdp->af_xdp path")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230201233640.367646-1-sdf@google.com
|
|
A statically linked executable can have a .plt due to IFUNCs, in which
case .symtab is used not .dynsym. Check the section header link to see
if that is the case, and then use symtab instead.
Example:
Before:
$ cat tstifunc.c
#include <stdio.h>
void thing1(void)
{
printf("thing1\n");
}
void thing2(void)
{
printf("thing2\n");
}
typedef void (*thing_fn_t)(void);
thing_fn_t thing_ifunc(void)
{
int x;
if (x & 1)
return thing2;
return thing1;
}
void thing(void) __attribute__ ((ifunc ("thing_ifunc")));
int main()
{
thing();
return 0;
}
$ gcc --version
gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0
Copyright (C) 2021 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
$ gcc -static -Wall -Wextra -Wno-uninitialized -o tstifuncstatic tstifunc.c
$ readelf -SW tstifuncstatic | grep 'Name\|plt\|dyn'
[Nr] Name Type Address Off Size ES Flg Lk Inf Al
[ 4] .rela.plt RELA 00000000004002e8 0002e8 000258 18 AI 29 20 8
[ 6] .plt PROGBITS 0000000000401020 001020 000190 00 AX 0 0 16
[20] .got.plt PROGBITS 00000000004c5000 0c4000 0000e0 08 WA 0 0 8
$ perf record -e intel_pt//u --filter 'filter main @ ./tstifuncstatic' ./tstifuncstatic
thing1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.008 MB perf.data ]
$ perf script --itrace=be --ns -F+flags,-event,+addr,-period,-comm,-tid,-cpu,-dso
15786.690189535: tr strt 0 [unknown] => 4017cd main+0x0
15786.690189535: tr end call 4017d5 main+0x8 => 401170 [unknown]
15786.690197660: tr strt 0 [unknown] => 4017da main+0xd
15786.690197660: tr end return 4017e0 main+0x13 => 401c1a __libc_start_call_main+0x6a
After:
$ perf script --itrace=be --ns -F+flags,-event,+addr,-period,-comm,-tid,-cpu,-dso
15786.690189535: tr strt 0 [unknown] => 4017cd main+0x0
15786.690189535: tr end call 4017d5 main+0x8 => 401170 thing_ifunc@plt+0x0
15786.690197660: tr strt 0 [unknown] => 4017da main+0xd
15786.690197660: tr end return 4017e0 main+0x13 => 401c1a __libc_start_call_main+0x6a
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230131131625.6964-8-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
A static executable can have a .plt due to the presence of IFUNCs. In
that case the .plt does not have a header. Check for whether there is a
header by comparing the number of entries to the number of relocation
entries.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230131131625.6964-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
For x86_64, the GNU linker is putting IFUNC information in the relocation
addend, so use it to try to find a symbol for plt entries that refer to
IFUNCs.
Example:
Before:
$ cat tstpltlib.c
void fn1(void) {}
void fn2(void) {}
void fn3(void) {}
void fn4(void) {}
$ cat tstpltifunc.c
#include <stdio.h>
void thing1(void)
{
printf("thing1\n");
}
void thing2(void)
{
printf("thing2\n");
}
typedef void (*thing_fn_t)(void);
thing_fn_t thing_ifunc(void)
{
int x;
if (x & 1)
return thing2;
return thing1;
}
void thing(void) __attribute__ ((ifunc ("thing_ifunc")));
void fn1(void);
void fn2(void);
void fn3(void);
void fn4(void);
int main()
{
fn4();
fn1();
thing();
fn2();
fn3();
return 0;
}
$ gcc --version
gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0
Copyright (C) 2021 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
$ gcc -Wall -Wextra -shared -o libtstpltlib.so tstpltlib.c
$ gcc -Wall -Wextra -Wno-uninitialized -o tstpltifunc tstpltifunc.c -L . -ltstpltlib -Wl,-rpath="$(pwd)"
$ readelf -rW tstpltifunc | grep -A99 plt
Relocation section '.rela.plt' at offset 0x738 contains 8 entries:
Offset Info Type Symbol's Value Symbol's Name + Addend
0000000000003f98 0000000300000007 R_X86_64_JUMP_SLOT 0000000000000000 puts@GLIBC_2.2.5 + 0
0000000000003fa8 0000000400000007 R_X86_64_JUMP_SLOT 0000000000000000 __stack_chk_fail@GLIBC_2.4 + 0
0000000000003fb0 0000000500000007 R_X86_64_JUMP_SLOT 0000000000000000 fn1 + 0
0000000000003fb8 0000000600000007 R_X86_64_JUMP_SLOT 0000000000000000 fn3 + 0
0000000000003fc0 0000000800000007 R_X86_64_JUMP_SLOT 0000000000000000 fn4 + 0
0000000000003fc8 0000000900000007 R_X86_64_JUMP_SLOT 0000000000000000 fn2 + 0
0000000000003fd0 0000000b00000007 R_X86_64_JUMP_SLOT 0000000000000000 getrandom@GLIBC_2.25 + 0
0000000000003fa0 0000000000000025 R_X86_64_IRELATIVE 125d
$ perf record -e intel_pt//u --filter 'filter main @ ./tstpltifunc' ./tstpltifunc
thing2
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.016 MB perf.data ]
$ perf script --itrace=be --ns -F+flags,-event,+addr,-period,-comm,-tid,-cpu,-dso
21860.073683659: tr strt 0 [unknown] => 561e212c42be main+0x0
21860.073683659: tr end call 561e212c42c6 main+0x8 => 561e212c4110 fn4@plt+0x0
21860.073683661: tr strt 0 [unknown] => 561e212c42cb main+0xd
21860.073683661: tr end call 561e212c42cb main+0xd => 561e212c40f0 fn1@plt+0x0
21860.073683661: tr strt 0 [unknown] => 561e212c42d0 main+0x12
21860.073683661: tr end call 561e212c42d0 main+0x12 => 561e212c40d0 offset_0x10d0@plt+0x0
21860.073698451: tr strt 0 [unknown] => 561e212c42d5 main+0x17
21860.073698451: tr end call 561e212c42d5 main+0x17 => 561e212c4120 fn2@plt+0x0
21860.073698451: tr strt 0 [unknown] => 561e212c42da main+0x1c
21860.073698451: tr end call 561e212c42da main+0x1c => 561e212c4100 fn3@plt+0x0
21860.073698452: tr strt 0 [unknown] => 561e212c42df main+0x21
21860.073698452: tr end return 561e212c42e5 main+0x27 => 7fb51cc29d90 __libc_start_call_main+0x80
After:
$ perf script --itrace=be --ns -F+flags,-event,+addr,-period,-comm,-tid,-cpu,-dso
21860.073683659: tr strt 0 [unknown] => 561e212c42be main+0x0
21860.073683659: tr end call 561e212c42c6 main+0x8 => 561e212c4110 fn4@plt+0x0
21860.073683661: tr strt 0 [unknown] => 561e212c42cb main+0xd
21860.073683661: tr end call 561e212c42cb main+0xd => 561e212c40f0 fn1@plt+0x0
21860.073683661: tr strt 0 [unknown] => 561e212c42d0 main+0x12
21860.073683661: tr end call 561e212c42d0 main+0x12 => 561e212c40d0 thing_ifunc@plt+0x0
21860.073698451: tr strt 0 [unknown] => 561e212c42d5 main+0x17
21860.073698451: tr end call 561e212c42d5 main+0x17 => 561e212c4120 fn2@plt+0x0
21860.073698451: tr strt 0 [unknown] => 561e212c42da main+0x1c
21860.073698451: tr end call 561e212c42da main+0x1c => 561e212c4100 fn3@plt+0x0
21860.073698452: tr strt 0 [unknown] => 561e212c42df main+0x21
21860.073698452: tr end return 561e212c42e5 main+0x27 => 7fb51cc29d90 __libc_start_call_main+0x80
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230131131625.6964-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To assist with synthesizing plt symbols for IFUNCs, record whether a
symbol is an alias of an IFUNC symbol.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230131131625.6964-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
For x86, with the addition of IFUNCs, relocation information becomes
disordered with respect to plt. Correct that by sorting the relocations by
offset.
Example:
Before:
$ cat tstpltlib.c
void fn1(void) {}
void fn2(void) {}
void fn3(void) {}
void fn4(void) {}
$ cat tstpltifunc.c
#include <stdio.h>
void thing1(void)
{
printf("thing1\n");
}
void thing2(void)
{
printf("thing2\n");
}
typedef void (*thing_fn_t)(void);
thing_fn_t thing_ifunc(void)
{
int x;
if (x & 1)
return thing2;
return thing1;
}
void thing(void) __attribute__ ((ifunc ("thing_ifunc")));
void fn1(void);
void fn2(void);
void fn3(void);
void fn4(void);
int main()
{
fn4();
fn1();
thing();
fn2();
fn3();
return 0;
}
$ gcc --version
gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0
Copyright (C) 2021 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
$ gcc -Wall -Wextra -shared -o libtstpltlib.so tstpltlib.c
$ gcc -Wall -Wextra -Wno-uninitialized -o tstpltifunc tstpltifunc.c -L . -ltstpltlib -Wl,-rpath="$(pwd)"
$ readelf -rW tstpltifunc | grep -A99 plt
Relocation section '.rela.plt' at offset 0x738 contains 8 entries:
Offset Info Type Symbol's Value Symbol's Name + Addend
0000000000003f98 0000000300000007 R_X86_64_JUMP_SLOT 0000000000000000 puts@GLIBC_2.2.5 + 0
0000000000003fa8 0000000400000007 R_X86_64_JUMP_SLOT 0000000000000000 __stack_chk_fail@GLIBC_2.4 + 0
0000000000003fb0 0000000500000007 R_X86_64_JUMP_SLOT 0000000000000000 fn1 + 0
0000000000003fb8 0000000600000007 R_X86_64_JUMP_SLOT 0000000000000000 fn3 + 0
0000000000003fc0 0000000800000007 R_X86_64_JUMP_SLOT 0000000000000000 fn4 + 0
0000000000003fc8 0000000900000007 R_X86_64_JUMP_SLOT 0000000000000000 fn2 + 0
0000000000003fd0 0000000b00000007 R_X86_64_JUMP_SLOT 0000000000000000 getrandom@GLIBC_2.25 + 0
0000000000003fa0 0000000000000025 R_X86_64_IRELATIVE 125d
$ perf record -e intel_pt//u --filter 'filter main @ ./tstpltifunc' ./tstpltifunc
thing2
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.029 MB perf.data ]
$ perf script --itrace=be --ns -F+flags,-event,+addr,-period,-comm,-tid,-cpu,-dso
20417.302513948: tr strt 0 [unknown] => 5629a74892be main+0x0
20417.302513948: tr end call 5629a74892c6 main+0x8 => 5629a7489110 fn2@plt+0x0
20417.302513949: tr strt 0 [unknown] => 5629a74892cb main+0xd
20417.302513949: tr end call 5629a74892cb main+0xd => 5629a74890f0 fn3@plt+0x0
20417.302513950: tr strt 0 [unknown] => 5629a74892d0 main+0x12
20417.302513950: tr end call 5629a74892d0 main+0x12 => 5629a74890d0 __stack_chk_fail@plt+0x0
20417.302528114: tr strt 0 [unknown] => 5629a74892d5 main+0x17
20417.302528114: tr end call 5629a74892d5 main+0x17 => 5629a7489120 getrandom@plt+0x0
20417.302528115: tr strt 0 [unknown] => 5629a74892da main+0x1c
20417.302528115: tr end call 5629a74892da main+0x1c => 5629a7489100 fn4@plt+0x0
20417.302528115: tr strt 0 [unknown] => 5629a74892df main+0x21
20417.302528115: tr end return 5629a74892e5 main+0x27 => 7ff14da29d90 __libc_start_call_main+0x80
After:
$ perf script --itrace=be --ns -F+flags,-event,+addr,-period,-comm,-tid,-cpu,-dso
20417.302513948: tr strt 0 [unknown] => 5629a74892be main+0x0
20417.302513948: tr end call 5629a74892c6 main+0x8 => 5629a7489110 fn4@plt+0x0
20417.302513949: tr strt 0 [unknown] => 5629a74892cb main+0xd
20417.302513949: tr end call 5629a74892cb main+0xd => 5629a74890f0 fn1@plt+0x0
20417.302513950: tr strt 0 [unknown] => 5629a74892d0 main+0x12
20417.302513950: tr end call 5629a74892d0 main+0x12 => 5629a74890d0 offset_0x10d0@plt+0x0
20417.302528114: tr strt 0 [unknown] => 5629a74892d5 main+0x17
20417.302528114: tr end call 5629a74892d5 main+0x17 => 5629a7489120 fn2@plt+0x0
20417.302528115: tr strt 0 [unknown] => 5629a74892da main+0x1c
20417.302528115: tr end call 5629a74892da main+0x1c => 5629a7489100 fn3@plt+0x0
20417.302528115: tr strt 0 [unknown] => 5629a74892df main+0x21
20417.302528115: tr end return 5629a74892e5 main+0x27 => 7ff14da29d90 __libc_start_call_main+0x80
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230131131625.6964-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The section .plt.sec was originally added for MPX and was first called
.plt.bnd. While MPX has been deprecated, .plt.sec is now also used for
IBT. On x86_64, IBT may be enabled by default, but can be switched off
using gcc option -fcf-protection=none, or switched on by -z ibt or -z
ibtplt. On 32-bit, option -z ibt or -z ibtplt will enable IBT.
With .plt.sec, calls are made into .plt.sec instead of .plt, so it makes
more sense to put the symbols there instead of .plt. A notable
difference is that .plt.sec does not have a header entry.
For x86, when synthesizing symbols for plt, use offset and entry size of
.plt.sec instead of .plt when there is a .plt.sec section.
Example on Ubuntu 22.04 gcc 11.3:
Before:
$ cat tstpltlib.c
void fn1(void) {}
void fn2(void) {}
void fn3(void) {}
void fn4(void) {}
$ cat tstplt.c
void fn1(void);
void fn2(void);
void fn3(void);
void fn4(void);
int main()
{
fn4();
fn1();
fn2();
fn3();
return 0;
}
$ gcc --version
gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0
Copyright (C) 2021 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
$ gcc -Wall -Wextra -shared -o libtstpltlib.so tstpltlib.c
$ gcc -Wall -Wextra -z ibt -o tstplt tstplt.c -L . -ltstpltlib -Wl,-rpath=$(pwd)
$ readelf -SW tstplt | grep 'plt\|Name'
[Nr] Name Type Address Off Size ES Flg Lk Inf Al
[11] .rela.plt RELA 0000000000000698 000698 000060 18 AI 6 24 8
[13] .plt PROGBITS 0000000000001020 001020 000050 10 AX 0 0 16
[14] .plt.got PROGBITS 0000000000001070 001070 000010 10 AX 0 0 16
[15] .plt.sec PROGBITS 0000000000001080 001080 000040 10 AX 0 0 16
$ perf record -e intel_pt//u --filter 'filter main @ ./tstplt' ./tstplt
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.015 MB perf.data ]
$ perf script --itrace=be --ns -F+flags,-event,+addr,-period,-comm,-tid,-cpu,-dso
38970.522546686: tr strt 0 [unknown] => 55fc222a81a9 main+0x0
38970.522546686: tr end call 55fc222a81b1 main+0x8 => 55fc222a80a0 [unknown]
38970.522546687: tr strt 0 [unknown] => 55fc222a81b6 main+0xd
38970.522546687: tr end call 55fc222a81b6 main+0xd => 55fc222a8080 [unknown]
38970.522546688: tr strt 0 [unknown] => 55fc222a81bb main+0x12
38970.522546688: tr end call 55fc222a81bb main+0x12 => 55fc222a80b0 [unknown]
38970.522546688: tr strt 0 [unknown] => 55fc222a81c0 main+0x17
38970.522546688: tr end call 55fc222a81c0 main+0x17 => 55fc222a8090 [unknown]
38970.522546689: tr strt 0 [unknown] => 55fc222a81c5 main+0x1c
38970.522546894: tr end return 55fc222a81cb main+0x22 => 7f3a4dc29d90 __libc_start_call_main+0x80
After:
$ perf script --itrace=be --ns -F+flags,-event,+addr,-period,-comm,-tid,-cpu,-dso
38970.522546686: tr strt 0 [unknown] => 55fc222a81a9 main+0x0
38970.522546686: tr end call 55fc222a81b1 main+0x8 => 55fc222a80a0 fn4@plt+0x0
38970.522546687: tr strt 0 [unknown] => 55fc222a81b6 main+0xd
38970.522546687: tr end call 55fc222a81b6 main+0xd => 55fc222a8080 fn1@plt+0x0
38970.522546688: tr strt 0 [unknown] => 55fc222a81bb main+0x12
38970.522546688: tr end call 55fc222a81bb main+0x12 => 55fc222a80b0 fn2@plt+0x0
38970.522546688: tr strt 0 [unknown] => 55fc222a81c0 main+0x17
38970.522546688: tr end call 55fc222a81c0 main+0x17 => 55fc222a8090 fn3@plt+0x0
38970.522546689: tr strt 0 [unknown] => 55fc222a81c5 main+0x1c
38970.522546894: tr end return 55fc222a81cb main+0x22 => 7f3a4dc29d90 __libc_start_call_main+0x80
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230131131625.6964-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In 32-bit executables the .plt entry size can be set to 4 when it is really
16. In fact the only sizes used for x86 (32 or 64 bit) are 8 or 16, so
check for those and, if not, use the alignment to choose which it is.
Example on Ubuntu 22.04 gcc 11.3:
Before:
$ cat tstpltlib.c
void fn1(void) {}
void fn2(void) {}
void fn3(void) {}
void fn4(void) {}
$ cat tstplt.c
void fn1(void);
void fn2(void);
void fn3(void);
void fn4(void);
int main()
{
fn4();
fn1();
fn2();
fn3();
return 0;
}
$ gcc --version
gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0
Copyright (C) 2021 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
$ gcc -m32 -Wall -Wextra -shared -o libtstpltlib32.so tstpltlib.c
$ gcc -m32 -Wall -Wextra -o tstplt32 tstplt.c -L . -ltstpltlib32 -Wl,-rpath=$(pwd)
$ perf record -e intel_pt//u --filter 'filter main @ ./tstplt32' ./tstplt32
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.011 MB perf.data ]
$ readelf -SW tstplt32 | grep 'plt\|Name'
[Nr] Name Type Addr Off Size ES Flg Lk Inf Al
[10] .rel.plt REL 0000041c 00041c 000028 08 AI 5 22 4
[12] .plt PROGBITS 00001030 001030 000060 04 AX 0 0 16 <- ES is 0x04, should be 0x10
[13] .plt.got PROGBITS 00001090 001090 000008 08 AX 0 0 8
$ perf script --itrace=be --ns -F+flags,-event,+addr,-period,-comm,-tid,-cpu,-dso
17894.383903029: tr strt 0 [unknown] => 565b81cd main+0x0
17894.383903029: tr end call 565b81d4 main+0x7 => 565b80d0 __x86.get_pc_thunk.bx+0x0
17894.383903031: tr strt 0 [unknown] => 565b81d9 main+0xc
17894.383903031: tr end call 565b81df main+0x12 => 565b8070 [unknown]
17894.383903032: tr strt 0 [unknown] => 565b81e4 main+0x17
17894.383903032: tr end call 565b81e4 main+0x17 => 565b8050 [unknown]
17894.383903033: tr strt 0 [unknown] => 565b81e9 main+0x1c
17894.383903033: tr end call 565b81e9 main+0x1c => 565b8080 [unknown]
17894.383903033: tr strt 0 [unknown] => 565b81ee main+0x21
17894.383903033: tr end call 565b81ee main+0x21 => 565b8060 [unknown]
17894.383903237: tr strt 0 [unknown] => 565b81f3 main+0x26
17894.383903237: tr end return 565b81fc main+0x2f => f7c21519 [unknown]
After:
$ perf script --itrace=be --ns -F+flags,-event,+addr,-period,-comm,-tid,-cpu,-dso
17894.383903029: tr strt 0 [unknown] => 565b81cd main+0x0
17894.383903029: tr end call 565b81d4 main+0x7 => 565b80d0 __x86.get_pc_thunk.bx+0x0
17894.383903031: tr strt 0 [unknown] => 565b81d9 main+0xc
17894.383903031: tr end call 565b81df main+0x12 => 565b8070 fn4@plt+0x0
17894.383903032: tr strt 0 [unknown] => 565b81e4 main+0x17
17894.383903032: tr end call 565b81e4 main+0x17 => 565b8050 fn1@plt+0x0
17894.383903033: tr strt 0 [unknown] => 565b81e9 main+0x1c
17894.383903033: tr end call 565b81e9 main+0x1c => 565b8080 fn2@plt+0x0
17894.383903033: tr strt 0 [unknown] => 565b81ee main+0x21
17894.383903033: tr end call 565b81ee main+0x21 => 565b8060 fn3@plt+0x0
17894.383903237: tr strt 0 [unknown] => 565b81f3 main+0x26
17894.383903237: tr end return 565b81fc main+0x2f => f7c21519 [unknown]
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230131131625.6964-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
