summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2017-03-14perf kretprobes: Offset from reloc_sym if kernel supports itNaveen N. Rao
We indicate support for accepting sym+offset with kretprobes through a line in ftrace README. Parse the same to identify support and choose the appropriate format for kprobe_events. As an example, without this perf patch, but with the ftrace changes: naveen@ubuntu:~/linux/tools/perf$ sudo cat /sys/kernel/debug/tracing/README | grep kretprobe place (kretprobe): [<module>:]<symbol>[+<offset>]|<memaddr> naveen@ubuntu:~/linux/tools/perf$ naveen@ubuntu:~/linux/tools/perf$ sudo ./perf probe -v do_open%return probe-definition(0): do_open%return symbol:do_open file:(null) line:0 offset:0 return:1 lazy:(null) 0 arguments Looking at the vmlinux_path (8 entries long) Using /boot/vmlinux for symbols Open Debuginfo file: /boot/vmlinux Try to find probe point from debuginfo. Matched function: do_open [2d0c7d8] Probe point found: do_open+0 Matched function: do_open [35d76b5] found inline addr: 0xc0000000004ba984 Failed to find "do_open%return", because do_open is an inlined function and has no return point. An error occurred in debuginfo analysis (-22). Trying to use symbols. Opening /sys/kernel/debug/tracing//kprobe_events write=1 Writing event: r:probe/do_open do_open+0 Writing event: r:probe/do_open_1 do_open+0 Added new events: probe:do_open (on do_open%return) probe:do_open_1 (on do_open%return) You can now use it in all perf tools, such as: perf record -e probe:do_open_1 -aR sleep 1 naveen@ubuntu:~/linux/tools/perf$ sudo cat /sys/kernel/debug/kprobes/list c000000000041370 k kretprobe_trampoline+0x0 [OPTIMIZED] c0000000004433d0 r do_open+0x0 [DISABLED] c0000000004433d0 r do_open+0x0 [DISABLED] And after this patch (and the subsequent powerpc patch): naveen@ubuntu:~/linux/tools/perf$ sudo ./perf probe -v do_open%return probe-definition(0): do_open%return symbol:do_open file:(null) line:0 offset:0 return:1 lazy:(null) 0 arguments Looking at the vmlinux_path (8 entries long) Using /boot/vmlinux for symbols Open Debuginfo file: /boot/vmlinux Try to find probe point from debuginfo. Matched function: do_open [2d0c7d8] Probe point found: do_open+0 Matched function: do_open [35d76b5] found inline addr: 0xc0000000004ba984 Failed to find "do_open%return", because do_open is an inlined function and has no return point. An error occurred in debuginfo analysis (-22). Trying to use symbols. Opening /sys/kernel/debug/tracing//README write=0 Opening /sys/kernel/debug/tracing//kprobe_events write=1 Writing event: r:probe/do_open _text+4469712 Writing event: r:probe/do_open_1 _text+4956248 Added new events: probe:do_open (on do_open%return) probe:do_open_1 (on do_open%return) You can now use it in all perf tools, such as: perf record -e probe:do_open_1 -aR sleep 1 naveen@ubuntu:~/linux/tools/perf$ sudo cat /sys/kernel/debug/kprobes/list c000000000041370 k kretprobe_trampoline+0x0 [OPTIMIZED] c0000000004433d0 r do_open+0x0 [DISABLED] c0000000004ba058 r do_open+0x8 [DISABLED] Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/496ef9f33c1ab16286ece9dd62aa672807aef91c.1488961018.git.naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-14perf probe: Factor out the ftrace README scanningNaveen N. Rao
Simplify and separate out the ftrace README scanning logic into a separate helper. This is used subsequently to scan for all patterns of interest and to cache the result. Since we are only interested in availability of probe argument type x, we will only scan for that. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/6dc30edc747ba82a236593be6cf3a046fa9453b5.1488961018.git.naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-14perf sched timehist: Add --next optionBrendan Gregg
The --next option shows the next task for each context switch, providing more context for the sequence of scheduler events. $ perf sched timehist --next | head Samples do not have callchains. time cpu task name waittime schdelay run time [tid/pid] (msec) (msec) (msec) ---------- --- ---------- --------- ------ ----- 374.793792 [0] <idle> 0.000 0.000 0.000 next: rngd[1524] 374.793801 [0] rngd[1524] 0.000 0.000 0.009 next: swapper/0[0] 374.794048 [7] <idle> 0.000 0.000 0.000 next: yes[30884] 374.794066 [7] yes[30884] 0.000 0.000 0.018 next: swapper/7[0] 374.794126 [2] <idle> 0.000 0.000 0.000 next: rngd[1524] 374.794140 [2] rngd[1524] 0.325 0.006 0.013 next: swapper/2[0] 374.794281 [3] <idle> 0.000 0.000 0.000 next: perf[31070] Signed-off-by: Brendan Gregg <bgregg@netflix.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1489456589-32555-1-git-send-email-bgregg@netflix.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-14perf tools: Add 'cgroup_id' sort order keywordHari Bathini
This patch introduces a cgroup identifier entry field in perf report to identify or distinguish data of different cgroups. It uses the device number and inode number of cgroup namespace, included in perf data with the new PERF_RECORD_NAMESPACES event, as cgroup identifier. With the assumption that each container is created with it's own cgroup namespace, this allows assessment/analysis of multiple containers at once. A simple test for this would be to clone a few processes passing SIGCHILD & CLONE_NEWCROUP flags to each of them, execute shell and run different workloads on each of those contexts, while running perf record command with --namespaces option. Shown below is the output of perf report, sorted with cgroup identifier, on perf.data generated with the above test scenario, clearly indicating one context's considerable use of kernel memory in comparison with others: $ perf report -s cgroup_id,sample --stdio # # Total Lost Samples: 0 # # Samples: 5K of event 'kmem:kmalloc' # Event count (approx.): 5965 # # Overhead cgroup id (dev/inode) Samples # ........ ..................... ............ # 81.27% 3/0xeffffffb 4848 16.24% 3/0xf00000d0 969 1.16% 3/0xf00000ce 69 0.82% 3/0xf00000cf 49 0.50% 0/0x0 30 While this is a start, there is further scope of improving this. For example, instead of cgroup namespace's device and inode numbers, dev and inode numbers of some or all namespaces may be used to distinguish which processes are running in a given container context. Also, scripts to map device and inode info to containers sounds plausible for better tracing of containers. Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/148891933338.25309.756882900782042645.stgit@hbathini.in.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-14perf script: Add script print support for namespace eventsHari Bathini
Introduce a new option to display events of type PERF_RECORD_NAMESPACES and update perf-script documentation accordingly. Shown below is output (trimmed) of perf script command with the newly introduced option, on perf.data generated with perf record command using --namespaces option. $ perf script --show-namespace-events swapper 0 [000] 0.000000: PERF_RECORD_NAMESPACES 1/1 - nr_namespaces: 7 [0/net: 3/0xf000001c, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc, 4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb] swapper 0 [000] 0.000000: PERF_RECORD_NAMESPACES 2/2 - nr_namespaces: 7 [0/net: 3/0xf000001c, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc, 4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb] Commiter notes: Testing it: Investigating that double PERF_RECORD_NAMESPACES for the 19155 pid/tid... Its more than that, there are two PERF_RECORD_COMM as well, and with zeroed timestamps, so probably a synthesizing artifact... # perf script --show-task --show-namespace <SNIP> perf 0 [000] 0.000000: PERF_RECORD_COMM: perf:19154/19154 perf 0 [000] 0.000000: PERF_RECORD_FORK(19155:19155):(19154:19154) perf 0 [000] 0.000000: PERF_RECORD_NAMESPACES 19155/19155 - nr_namespaces: 7 [0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc, 4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb] perf 0 [000] 0.000000: PERF_RECORD_COMM: perf:19155/19155 perf 0 [000] 0.000000: PERF_RECORD_COMM: perf:19155/19155 perf 0 [000] 0.000000: PERF_RECORD_NAMESPACES 19155/19155 - nr_namespaces: 7 [0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc, 4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb] swapper 0 [000] 3110.881834: 1 cycles: ffffffffa7060bf6 native_write_msr (/lib/modules/4.11.0-rc1+/build/vmlinux) <SNIP> Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/148891932627.25309.1941587059154176221.stgit@hbathini.in.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-14perf record: Synthesize namespace events for current processesHari Bathini
Synthesize PERF_RECORD_NAMESPACES events for processes that were running prior to invocation of perf record. The data for this is taken from /proc/$PID/ns. These changes make way for analyzing events with regard to namespaces. Committer notes: Check if 'tool' is NULL in perf_event__synthesize_namespaces(), as in the test__mmap_thread_lookup case, i.e. 'perf test Lookup mmap thread". Testing it: # ps axH > /tmp/allthreads # perf record -a --namespaces usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.169 MB perf.data (8 samples) ] # perf report -D | grep PERF_RECORD_NAMESPACES | wc -l 602 # wc -l /tmp/allthreads 601 /tmp/allthreads # tail /tmp/allthreads 16951 pts/4 T 0:00 git rebase -i a033bf1bfacdaa25642e6bcc857a7d0f67cc3c92^ 16952 pts/4 T 0:00 /bin/sh /usr/libexec/git-core/git-rebase -i a033bf1bfacdaa25642e6bcc857a7d0f67cc3c92^ 17176 pts/4 T 0:00 git commit --amend --no-post-rewrite 17204 pts/4 T 0:00 vim /home/acme/git/linux/.git/COMMIT_EDITMSG 18939 ? S 0:00 [kworker/2:1] 18947 ? S 0:00 [kworker/3:0] 18974 ? S 0:00 [kworker/1:0] 19047 ? S 0:00 [kworker/0:1] 19152 pts/6 S+ 0:00 weechat 19153 pts/7 R+ 0:00 ps axH # perf report -D | grep PERF_RECORD_NAMESPACES | tail 0 0 0x125068 [0xa0]: PERF_RECORD_NAMESPACES 17176/17176 - nr_namespaces: 7 0 0 0x1255b8 [0xa0]: PERF_RECORD_NAMESPACES 17204/17204 - nr_namespaces: 7 0 0 0x125df0 [0xa0]: PERF_RECORD_NAMESPACES 18939/18939 - nr_namespaces: 7 0 0 0x125f00 [0xa0]: PERF_RECORD_NAMESPACES 18947/18947 - nr_namespaces: 7 0 0 0x126010 [0xa0]: PERF_RECORD_NAMESPACES 18974/18974 - nr_namespaces: 7 0 0 0x126120 [0xa0]: PERF_RECORD_NAMESPACES 19047/19047 - nr_namespaces: 7 0 0 0x126230 [0xa0]: PERF_RECORD_NAMESPACES 19152/19152 - nr_namespaces: 7 0 0 0x129330 [0xa0]: PERF_RECORD_NAMESPACES 19154/19154 - nr_namespaces: 7 0 0 0x12a1f8 [0xa0]: PERF_RECORD_NAMESPACES 19155/19155 - nr_namespaces: 7 0 0 0x12b0b8 [0xa0]: PERF_RECORD_NAMESPACES 19155/19155 - nr_namespaces: 7 # Humm, investigate why we got two record for the 19155 pid/tid... Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/148891931111.25309.11073854609798681633.stgit@hbathini.in.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-14perf tools: Add PERF_RECORD_NAMESPACES to include namespaces related infoHari Bathini
Introduce a new option to record PERF_RECORD_NAMESPACES events emitted by the kernel when fork, clone, setns or unshare are invoked. And update perf-record documentation with the new option to record namespace events. Committer notes: Combined it with a later patch to allow printing it via 'perf report -D' and be able to test the feature introduced in this patch. Had to move here also perf_ns__name(), that was introduced in another later patch. Also used PRIu64 and PRIx64 to fix the build in some enfironments wrt: util/event.c:1129:39: error: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'long long unsigned int' [-Werror=format=] ret += fprintf(fp, "%u/%s: %lu/0x%lx%s", idx ^ Testing it: # perf record --namespaces -a ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.083 MB perf.data (423 samples) ] # # perf report -D <SNIP> 3 2028902078892 0x115140 [0xa0]: PERF_RECORD_NAMESPACES 14783/14783 - nr_namespaces: 7 [0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc, 4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb] 0x1151e0 [0x30]: event: 9 . . ... raw event: size 48 bytes . 0000: 09 00 00 00 02 00 30 00 c4 71 82 68 0c 7f 00 00 ......0..q.h.... . 0010: a9 39 00 00 a9 39 00 00 94 28 fe 63 d8 01 00 00 .9...9...(.c.... . 0020: 03 00 00 00 00 00 00 00 ce c4 02 00 00 00 00 00 ................ <SNIP> NAMESPACES events: 1 <SNIP> # Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/148891930386.25309.18412039920746995488.stgit@hbathini.in.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-13Merge tag 'powerpc-4.11-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull some more powerpc fixes from Michael Ellerman: "The main item is the addition of the Power9 Machine Check handler. This was delayed to make sure some details were correct, and is as minimal as possible. The rest is small fixes, two for the Power9 PMU, two dealing with obscure toolchain problems, two for the PowerNV IOMMU code (used by VFIO), and one to fix a crash on 32-bit machines with macio devices due to missing dma_ops. Thanks to: Alexey Kardashevskiy, Cyril Bur, Larry Finger, Madhavan Srinivasan, Nicholas Piggin" * tag 'powerpc-4.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: POWER9 machine check handler powerpc/64s: allow machine check handler to set severity and initiator powerpc/64s: fix handling of non-synchronous machine checks powerpc/pmac: Fix crash in dma-mapping.h with NULL dma_ops powerpc/powernv/ioda2: Update iommu table base on ownership change powerpc/powernv/ioda2: Gracefully fail if too many TCE levels requested selftests/powerpc: Replace stxvx and lxvx with stxvd2x/lxvd2x powerpc/perf: Handle sdar_mode for marked event in power9 powerpc/perf: Fix perf_get_data_addr() for power9 DD1 powerpc/boot: Fix zImage TOC alignment
2017-03-13perf hists browser: Fix typo in function switch_data_fileChangbin Du
Should clear buf 'abs_path', not 'options'. Signed-off-by: Changbin Du <changbin.du@intel.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: 341487ab561f ("perf hists browser: Add option for runtime switching perf data file") Link: http://lkml.kernel.org/r/20170313114652.9207-1-changbin.du@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-13perf report: Document +field style argument support for --field optionChangbin Du
Commit 2f3f9bcf000b ("perf tools: Add +field argument support for --field option") by Jiri Olsa <jolsa@kernel.org> introduced +field style argument support for --field option. This is useful but not updated documentation. This add a little description there. Signed-off-by: Changbin Du <changbin.du@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170313083252.23644-1-changbin.du@intel.com [ Slightly improved the phrase structure ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-13perf sort: Fix segfault with basic block 'cycles' sort dimensionChangbin Du
Skip the sample which doesn't have branch_info to avoid segmentation fault: The fault can be reproduced by: perf record -a perf report -F cycles Signed-off-by: Changbin Du <changbin.du@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: 0e332f033a82 ("perf tools: Add support for cycles, weight branch_info field") Link: http://lkml.kernel.org/r/20170313083148.23568-1-changbin.du@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-13perf tools: Ignore generated files pmu-events/{jevents,pmu-events.c} for gitChangbin Du
Ignore two files: pmu-events/{jevents,pmu-events.c} which are generated during the build. Committer notes: Testing it: $ make -C tools/perf/ $ git status On branch perf/core Untracked files: (use "git add <file>..." to include in what will be committed) tools/perf/pmu-events/jevents tools/perf/pmu-events/pmu-events.c nothing added to commit but untracked files present (use "git add" to track) $ After the patch: $ git status On branch perf/core nothing to commit, working tree clean $ Signed-off-by: Changbin Du <changbin.du@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170313083026.23487-1-changbin.du@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-13perf tools: Missing c2c command in command-listChangbin Du
Add the c2c command to command-list.txt so perf help can list this command. Committer notes: Before: # perf help | grep c2c # After: # perf help | grep c2c c2c Shared Data C2C/HITM Analyzer. # Signed-off-by: Changbin Du <changbin.du@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170313082845.23373-1-changbin.du@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-12selftests/bpf: fix broken buildAlexei Starovoitov
Recent merge of 'linux-kselftest-4.11-rc1' tree broke bpf test build. None of the tests were building and test_verifier.c had tons of compiler errors. Fix it and add #ifdef CAP_IS_SUPPORTED to support old versions of libcap. Tested on centos 6.8 and 7 Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09userfaultfd: selftest: vm: allow to build in vm/ directoryAndrea Arcangeli
linux/tools/testing/selftests/vm $ make gcc -Wall -I ../../../../usr/include compaction_test.c -lrt -o /compaction_test /usr/lib/gcc/x86_64-pc-linux-gnu/4.9.4/../../../../x86_64-pc-linux-gnu/bin/ld: cannot open output file /compaction_test: Permission denied collect2: error: ld returned 1 exit status make: *** [../lib.mk:54: /compaction_test] Error 1 Since commit a8ba798bc8ec ("selftests: enable O and KBUILD_OUTPUT") selftests/vm build fails if run from the "selftests/vm" directory, but it works in the selftests/ directory. It's quicker to be able to do a local vm-only build after a tree wipe and this patch allows for it again. Link: http://lkml.kernel.org/r/20170302173738.18994-4-aarcange@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09scripts/spelling.txt: add "overide" pattern and fix typo instancesMasahiro Yamada
Fix typos and add the following to the scripts/spelling.txt: overide||override While we are here, fix the doubled "address" in the touched line Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt. Also, fix the comment block style in the touched hunks in drivers/media/dvb-frontends/drx39xyj/drx_driver.h. Link: http://lkml.kernel.org/r/1481573103-11329-21-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09selftests/powerpc: Replace stxvx and lxvx with stxvd2x/lxvd2xCyril Bur
On POWER8 (ISA 2.07) lxvx and stxvx are defined to be extended mnemonics of lxvd2x and stxvd2x. For POWER9 (ISA 3.0) the HW architects in their infinite wisdom made lxvx and stxvx instructions in their own right. POWER9 aware GCC will use the POWER9 instruction for lxvx and stxvx causing these selftests to fail on POWER8. Further compounding the issue, because of the way -mvsx works it will cause the power9 instructions to be used regardless of -mcpu=power8 to GCC or -mpower8 to AS. The safest way to address the problem for now is to not use the extended mnemonic. We don't care how the CPU loads the values from memory since the tests only performs register comparisons, so using stdvd2x/lxvd2x does not impact the test. Signed-off-by: Cyril Bur <cyrilbur@gmail.com> Acked-by: Balbir Singh<bsingharora@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-08Merge tag 'ktest-v4.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest Pull ktest fixes from Steven Rostedt: "Greg Kroah-Hartman reported to me that the ktest of v4.11-rc1 locked up in an infinite loop while doing the make mrproper. Looking into the cause I noticed that a recent update to the function run_command (used for running all shell commands, including "make mrproper") changed the internal loop to use the function wait_for_input. The wait_for_input function uses select to look at two file descriptors. One is the file descriptor of the command it is running, the other is STDIN. The STDIN check was not checking the return status of the sysread call, and was also just writing a lot of data into syswrite without regard to the size of the data read. Changing the code to check the return status of sysread, and also to still process the passed in descriptor data without looping back to the select fixed Greg's problem. While looking at this code I also realized that the loop did not honor the timeout if STDIN always had input (or for some reason return error). this could prevent wait_for_input to timeout on the file descriptor it is suppose to be waiting for. That is fixed too" * tag 'ktest-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: ktest: Make sure wait_for_input does honor the timeout ktest: Fix while loop in wait_for_input
2017-03-08ktest: Make sure wait_for_input does honor the timeoutSteven Rostedt (VMware)
The function wait_for_input takes in a timeout, and even has a default timeout. But if for some reason the STDIN descriptor keeps sending in data, the function will never time out. The timout is to wait for the data from the passed in file descriptor, not for STDIN. Adding a test in the case where there's no data from the passed in file descriptor that checks to see if the timeout passed, will ensure that it will timeout properly even if there's input in STDIN. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-03-08ktest: Fix while loop in wait_for_inputSteven Rostedt (VMware)
The run_command function was changed to use the wait_for_input function to allow having a timeout if the command to run takes too much time. There was a bug in the wait_for_input where it could end up going into an infinite loop. There's two issues here. One is that the return value of the sysread wasn't used for the write (to write a proper size), and that it should continue processing the passed in file descriptor too even if there was input. There was no check for error, if for some reason STDIN returned an error, the function would go into an infinite loop and never exit. Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Fixes: 6e98d1b4415f ("ktest: Add timeout to ssh command") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-03-07Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes and minor updates all over the place: - an SGI/UV fix - a defconfig update - a build warning fix - move the boot_params file to the arch location in debugfs - a pkeys fix - selftests fix - boot message fixes - sparse fixes - a resume warning fix - ioapic hotplug fixes - reboot quirks ... plus various minor cleanups" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/build/x86_64_defconfig: Enable CONFIG_R8169 x86/reboot/quirks: Add ASUS EeeBook X205TA/W reboot quirk x86/hpet: Prevent might sleep splat on resume x86/boot: Correct setup_header.start_sys name x86/purgatory: Fix sparse warning, symbol not declared x86/purgatory: Make functions and variables static x86/events: Remove last remnants of old filenames x86/pkeys: Check against max pkey to avoid overflows x86/ioapic: Split IOAPIC hot-removal into two steps x86/PCI: Implement pcibios_release_device to release IRQ from IOAPIC x86/intel_rdt: Remove duplicate inclusion of linux/cpu.h x86/vmware: Remove duplicate inclusion of asm/timer.h x86/hyperv: Hide unused label x86/reboot/quirks: Add ASUS EeeBook X205TA reboot quirk x86/platform/uv/BAU: Fix HUB errors by remove initial write to sw-ack register x86/selftests: Add clobbers for int80 on x86_64 x86/apic: Simplify enable_IR_x2apic(), remove try_to_enable_IR() x86/apic: Fix a warning message in logical CPU IDs allocation x86/kdebugfs: Move boot params hierarchy under (debugfs)/x86/
2017-03-07Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core fixes from Ingo Molnar: "A couple of sched.h splitup related build fixes, plus an objtool fix" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix another GCC jump table detection issue drivers/char/nwbutton: Fix build breakage caused by include file reshuffling h8300: Fix build breakage caused by header file changes avr32: Fix build error caused by include file reshuffling
2017-03-07Merge branch 'idr-4.11' of git://git.infradead.org/users/willy/linux-daxLinus Torvalds
Pull idr fix (and new tests) from Matthew Wilcox: "One urgent patch in here; freeing the correct IDA bitmap. Everything else is changes to the test suite" * 'idr-4.11' of git://git.infradead.org/users/willy/linux-dax: radix tree test suite: Specify -m32 in LDFLAGS too ida: Free correct IDA bitmap radix tree test suite: Depend on Makefile and quieten grep radix tree test suite: Fix build with --as-needed radix tree test suite: Build 32 bit binaries radix tree test suite: Add performance test for radix_tree_join() radix tree test suite: Add performance test for radix_tree_split() radix tree test suite: Add performance benchmarks radix tree test suite: Add test for radix_tree_clear_tags() radix tree test suite: Add tests for ida_simple_get() and ida_simple_remove() radix tree test suite: Add test for idr_get_next()
2017-03-07Merge tag 'powerpc-4.11-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Five fairly small fixes for things that went in this cycle. A fairly large patch to rework the CAS logic on Power9, necessitated by a late change to the firmware API, and we can't boot without it. Three fixes going to stable, allowing more instructions to be emulated on LE, fixing a boot crash on 32-bit Freescale BookE machines, and the OPAL XICS workaround. And a patch from me to sort the selects under CONFIG PPC. Annoying churn, but worth it in the long run, and best for it to go in now to avoid conflicts. Thanks to: Alexey Kardashevskiy, Anton Blanchard, Balbir Singh, Gautham R. Shenoy, Laurentiu Tudor, Nicholas Piggin, Paul Mackerras, Ravi Bangoria, Sachin Sant, Shile Zhang, Suraj Jitindar Singh" * tag 'powerpc-4.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Sort the selects under CONFIG_PPC powerpc/64: Fix L1D cache shape vector reporting L1I values powerpc/64: Avoid panic during boot due to divide by zero in init_cache_info() powerpc: Update to new option-vector-5 format for CAS powerpc: Parse the command line before calling CAS powerpc/xics: Work around limitations of OPAL XICS priority handling powerpc/64: Fix checksum folding in csum_add() powerpc/powernv: Fix opal tracepoints with JUMP_LABEL=n powerpc/booke: Fix boot crash due to null hugepd powerpc: Fix compiling a BE kernel with a powerpc64le toolchain selftest/powerpc: Fix false failures for skipped tests powerpc/powernv: Fix bug due to labeling ambiguity in power_enter_stop powerpc/64: Invalidate process table caching after setting process table powerpc: emulate_step() tests for load/store instructions powerpc: Emulation support for load/store instructions on LE
2017-03-07radix tree test suite: Specify -m32 in LDFLAGS tooMatthew Wilcox
Michael's patch to use the default make rule for linking and the patch from Rehas to use -m32 if building a 32-bit test-suite on a 64-bit platform don't work well together. Reported-by: Rehas Sachdeva <aquannie@gmail.com> Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
2017-03-07ida: Free correct IDA bitmapMatthew Wilcox
There's a relatively rare race where we look at the per-cpu preallocated IDA bitmap, see it's NULL, allocate a new one, and atomically update it. If the kmalloc() happened to sleep and we were rescheduled to a different CPU, or an interrupt came in at the exact right time, another task might have successfully allocated a bitmap and already deposited it. I forgot what the semantics of cmpxchg() were and ended up freeing the wrong bitmap leading to KASAN reporting a use-after-free. Dmitry found the bug with syzkaller & wrote the patch. I wrote the test case that will reproduce the bug without his patch being applied. Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
2017-03-07radix tree test suite: Depend on Makefile and quieten grepMatthew Wilcox
Changing the CFLAGS in the Makefile didn't always lead to a recompilation because the OFILES didn't depend on the Makefile. Also, after doing make clean, grep would still complain about a missing map-shift.h; we need -s as well as -q. Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
2017-03-07radix tree test suite: Fix build with --as-neededMichael Ellerman
Currently the radix tree test suite doesn't build with toolchains that use --as-needed by default, for example Ubuntu's: cc -I. -I../../include -g -O2 -Wall -D_LGPL_SOURCE -fsanitize=address -lpthread -lurcu main.o ... -o main /usr/bin/ld: regression1.o: undefined reference to symbol 'pthread_join@@GLIBC_2.17' /lib/powerpc64le-linux-gnu/libpthread.so.0: error adding symbols: DSO missing from command line collect2: error: ld returned 1 exit status This is caused by the custom makefile rules placing LDFLAGS before the .o files that need the libraries. We could fix it by using --no-as-needed, or rewriting the custom rules. But we can also just drop the custom rules and move the libraries to LDLIBS, and then the default rules work correctly - with the one caveat that we need to add -fsanitize=address to LDFLAGS because that must be passed to the linker as well as the compiler. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
2017-03-07radix tree test suite: Build 32 bit binariesRehas Sachdeva
Add option 'make BUILD=32' for building 32-bit binaries. Signed-off-by: Rehas Sachdeva <aquannie@gmail.com> Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
2017-03-07radix tree test suite: Add performance test for radix_tree_join()Rehas Sachdeva
Signed-off-by: Rehas Sachdeva <aquannie@gmail.com> Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
2017-03-07radix tree test suite: Add performance test for radix_tree_split()Rehas Sachdeva
Signed-off-by: Rehas Sachdeva <aquannie@gmail.com> Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
2017-03-07radix tree test suite: Add performance benchmarksRehas Sachdeva
Add performance benchmarks for radix tree insertion, tagging and deletion. Signed-off-by: Rehas Sachdeva <aquannie@gmail.com> Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
2017-03-07radix tree test suite: Add test for radix_tree_clear_tags()Rehas Sachdeva
Assert that radix_tree_clear_tags() clears the tags on the passed node and slot. Assert that the case where the radix tree has only one entry at index zero and the node is NULL, is also handled. Signed-off-by: Rehas Sachdeva <aquannie@gmail.com> Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
2017-03-07radix tree test suite: Add tests for ida_simple_get() and ida_simple_remove()Rehas Sachdeva
Assert that ida_simple_get() allocates an id in the passed range or returns error on failure, and ida_simple_remove() releases an allocated id. Signed-off-by: Rehas Sachdeva <aquannie@gmail.com> Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
2017-03-07radix tree test suite: Add test for idr_get_next()Rehas Sachdeva
Assert that idr_get_next() returns the next populated entry in the tree with an ID greater than or equal to the value pointed to by @nextid argument. Signed-off-by: Rehas Sachdeva <aquannie@gmail.com> Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
2017-03-07perf c2c: Fix display bug when using pipeNamhyung Kim
Currently 'perf c2c report' determines display mode using the --stdio option, but it could be a problem if stdout is not a tty since setup_browser falls back to stdio in this case. But perf c2c didn't know this and tried to use TUI browser anyway. It should check "use_browser" variable instead. For example, the following command showed nothing and broke terminal setting. Now it's fixed.. $ perf c2c report | head ================================================= Trace Event Information ================================================= Total records : 136 Locked Load/Store Operations : 6 Load Operations : 62 Loads - uncacheable : 0 Loads - IO : 1 Loads - Miss : 7 Loads - no mapping : 2 Committer notes: When trying it without a proper perf.data file it results in a stuck terminal, just as Namhyung reported above: [acme@jouet ~]$ perf c2c report | head WARNING: no sample cpu value[acme@jouet ~]$ One has to kill it from some other xterm. Confirm that this patch fixes it: After: $ perf c2c report | head WARNING: no sample cpu value================================================= Trace Event Information ================================================= Total records : 14 Locked Load/Store Operations : 0 Load Operations : 0 Loads - uncacheable : 0 Loads - IO : 0 Loads - Miss : 0 Loads - no mapping : 0 $ Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20170307150851.22304-6-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-07perf c2c: Clarify help message of --stats optionNamhyung Kim
As it is not strictly asking for only stdio output, but will imply using it. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20170307150851.22304-5-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-07perf report: Hide tip message when -q option is givenNamhyung Kim
The tip message at the end was printed regardless of the -q option. Originally, the message suggested only '-s comm,dso' option for higher level view when no sort option and parent option were given. Now it shows random help message regardless of the options so the condition can be simplified to honor the -q option. Committer notes: Before: $ perf report --stdio -q 42.77% ls ls [.] _init 13.21% ls ld-2.24.so [.] match_symbol 12.55% ls libc-2.24.so [.] __strcoll_l 11.94% ls libc-2.24.so [.] _init # # (Tip: Show current config key-value pairs: perf config --list) # $ After: $ perf report --stdio -q 42.77% ls ls [.] _init 13.21% ls ld-2.24.so [.] match_symbol 12.55% ls libc-2.24.so [.] __strcoll_l 11.94% ls libc-2.24.so [.] _init $ We still have those two extra lines tho (that git commit insists in turning into one, or git commit --amend doesn't make me add), food for another patch... Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20170307150851.22304-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-07objtool: Fix another GCC jump table detection issueJosh Poimboeuf
Arnd Bergmann reported a (false positive) objtool warning: drivers/infiniband/sw/rxe/rxe_resp.o: warning: objtool: rxe_responder()+0xfe: sibling call from callable instruction with changed frame pointer The issue is in find_switch_table(). It tries to find a switch statement's jump table by walking backwards from an indirect jump instruction, looking for a relocation to the .rodata section. In this case it stopped walking prematurely: the first .rodata relocation it encountered was for a variable (resp_state_name) instead of a jump table, so it just assumed there wasn't a jump table. The fix is to ignore any .rodata relocation which refers to an ELF object symbol. This works because the jump tables are anonymous and have no symbols associated with them. Reported-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 3732710ff6f2 ("objtool: Improve rare switch jump table pattern detection") Link: http://lkml.kernel.org/r/20170302225723.3ndbsnl4hkqbne7a@treble Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-07Merge tag 'perf-core-for-mingo-4.11-20170306' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: New features: - Allow sorting by symbol_size in 'perf report' and 'perf top' (Charles Baylis) E.g.: # perf report -s symbol_size,symbol Samples: 9K of event 'cycles:k', Event count (approx.): 2870461623 Overhead Symbol size Symbol 14.55% 326 [k] flush_tlb_mm_range 7.20% 1045 [k] filemap_map_pages 5.82% 124 [k] vma_interval_tree_insert 5.18% 2430 [k] unmap_page_range 2.57% 571 [k] vma_interval_tree_remove 1.94% 494 [k] page_add_file_rmap 1.82% 740 [k] page_remove_rmap 1.66% 1017 [k] release_pages 1.57% 1636 [k] update_blocked_averages 1.57% 76 [k] unlock_page - Add support for -p/--pid, -a/--all-cpus and -C/--cpu in 'perf ftrace' (Namhyung Kim) Change in behaviour: - Make system wide (-a) the default option if no target was specified and one of following conditions is met: - No workload specified (current behaviour) - A workload is specified but all requested events are system wide ones, like uncore ones. (Jiri Olsa) Fixes: - Add missing initialization to the instruction decoder used in the intel PT/BTS code, which was causing lots of failures in 'perf test', looking for a value when there was none (Adrian Hunter) Infrastructure changes: - Add arch code needed to adopt the kernel's refcount_t to aid in catching bugs when using atomic_t as a reference counter, basically cmpxchg related functions (Arnaldo Carvalho de Melo) - Convert the code using atomic_t as reference counts to refcount_t (Elena Rashetova) - Add feature test for sched_getcpu() to more easily check for its presence in the many libc implementations and accross different versions of such C libraries (Arnaldo Carvalho de Melo) - Issue a HW watchdog disable hint in 'perf stat' for when some of the requested events can't get counted because a PMU counter is taken by that watchdog (Borislav Petkov). - Add mapping for Intel's KnightsMill PMU events (Karol Wachowski) Documentation changes: - Clarify the term 'convergence' in: perf bench numa numa-mem -h --show_convergence (Jiri Olsa) Kernel code changes: - Ensure probe location is at function entry in kretprobes (Naveen N. Rao) - Allow return probes with offsets and absolute addresses (Naveen N. Rao) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-06perf bench numa: Add more comment for -c optionJiri Olsa
Adding more commentary for -c/--show_convergence option, to explain how the convergence is defined. Before: -c, --show_convergence show convergence details Now: -c, --show_convergence convergence is reached when each process \ (all its threads) is running on a single NUMA node. Suggested--by: Jiri Hladky <jhladky@redhat.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Hladky <jhladky@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1488732011-27384-1-git-send-email-jolsa@kernel.org [ Rephrased a bit based on a IRC conversation with Jiri ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-04tools/power turbostat: bugfix: GFXMHz column not changingLen Brown
turbostat displays a GFXMHz column, which comes from reading /sys/class/graphics/fb0/device/drm/card0/gt_cur_freq_mhz But GFXMHz was not changing, even when a manual cat /sys/class/graphics/fb0/device/drm/card0/gt_cur_freq_mhz showed a new value. It turns out that a rewind() on the open file is not sufficient, fflush() (or a close/open) is needed to read fresh values. Reported-by: Yaroslav Isakov <yaroslav.isakov@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2017-03-04Merge tag 'kvm-4.11-2' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull more KVM updates from Radim Krčmář: "Second batch of KVM changes for the 4.11 merge window: PPC: - correct assumption about ASDR on POWER9 - fix MMIO emulation on POWER9 x86: - add a simple test for ioperm - cleanup TSS (going through KVM tree as the whole undertaking was caused by VMX's use of TSS) - fix nVMX interrupt delivery - fix some performance counters in the guest ... and two cleanup patches" * tag 'kvm-4.11-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: nVMX: Fix pending events injection x86/kvm/vmx: remove unused variable in segment_base() selftests/x86: Add a basic selftest for ioperm x86/asm: Tidy up TSS limit code kvm: convert kvm.users_count from atomic_t to refcount_t KVM: x86: never specify a sample period for virtualized in_tx_cp counters KVM: PPC: Book3S HV: Don't use ASDR for real-mode HPT faults on POWER9 KVM: PPC: Book3S HV: Fix software walk of guest process page tables
2017-03-03Merge branch 'work.misc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc final vfs updates from Al Viro: "A few unrelated patches that got beating in -next. Everything else will have to go into the next window ;-/" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: hfs: fix hfs_readdir() selftest for default_file_splice_read() infoleak 9p: constify ->d_name handling
2017-03-03Merge branch 'libnvdimm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: "A fix and regression test case for nvdimm namespace label compatibility. Details: - An "nvdimm namespace label" is metadata on an nvdimm that provisions dimm capacity into a "namespace" that can host a block device / dax-filesytem, or a device-dax character device. A namespace is an object that other operating environment and platform firmware needs to comprehend for capabilities like booting from an nvdimm. The label metadata contains a checksum that Linux was not calculating correctly leading to other environments rejecting the Linux label. These have received a build success notification from the kbuild robot, and a positive test result from Nick who reported the problem" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nfit, libnvdimm: fix interleave set cookie calculation tools/testing/nvdimm: make iset cookie predictable
2017-03-03tools build: Use the same CC for feature detection and actual buildArnaldo Carvalho de Melo
When build with: 'make CC=clang' we were not using that CC to do feature detection, which resulted in features being detected with gcc and then the actual tools being built with clang. Most of the time these compilers are compatible enough, so no problem was being noticed. As soon as a system with an old enough clang, one that hasn't the cpuid.h header is used, and a gcc with it, the "get_cpuid" feature will be found available but then code that will use can't be compiled. Noticed with this combination: / $ gcc --version | head -1 gcc (Alpine 6.3.0) 6.3.0 / $ clang --version | head -1 clang version 3.8.1 (tags/RELEASE_381/final) / $ cat /etc/alpine-release 3.5.0 / $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-60q18nvlvgpyfv7e2qqgx4ou@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-03perf bench futex: Fix build on musl + clangArnaldo Carvalho de Melo
When building with clang on a musl libc system, Alpine Linux, we end up hitting a problem where memset() is used but its prototype is not present, add it to avoid this: bench/futex-wake.c:99:3: error: implicitly declaring library function 'memset' with type 'void *(void *, int, unsigned long)' [-Werror,-Wimplicit-function-declaration] CPU_ZERO(&cpu); ^ /usr/include/sched.h:127:23: note: expanded from macro 'CPU_ZERO' #define CPU_ZERO(set) CPU_ZERO_S(sizeof(cpu_set_t),set) ^ /usr/include/sched.h:110:30: note: expanded from macro 'CPU_ZERO_S' #define CPU_ZERO_S(size,set) memset(set,0,size) ^ bench/futex-wake.c:99:3: note: include the header <string.h> or explicitly provide a declaration for 'memset' Found while updating my test build containers to build perf with clang in more systems. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-jh10vaz2r98zl6gm5iau8prr@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-03perf bench futex: Use __maybe_unusedArnaldo Carvalho de Melo
Instead of attributing a variable to itself to silence the compiler, use the attribute designed for that, avoiding this: In file included from bench/futex-hash.c:24: bench/futex.h:95:7: error: explicitly assigning value of variable of type 'pthread_attr_t *' to itself [-Werror,-Wself-assign] attr = attr; ~~~~ ^ ~~~~ bench/futex.h:96:13: error: explicitly assigning value of variable of type 'size_t' (aka 'unsigned long') to itself [-Werror,-Wself-assign] cpusetsize = cpusetsize; ~~~~~~~~~~ ^ ~~~~~~~~~~ bench/futex.h:97:9: error: explicitly assigning value of variable of type 'cpu_set_t *' (aka 'struct cpu_set_t *') to itself [-Werror,-Wself-assign] cpuset = cpuset; ~~~~~~ ^ ~~~~~~ That is only triggered when HAVE_PTHREAD_ATTR_SETAFFINITY_NP isn't set. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-14ws1d1elj2d5ej8g7cwdqau@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-03tools build: Add test for sched_getcpu()Arnaldo Carvalho de Melo
Instead of trying to go on adding more ifdef conditions, do a feature test and define HAVE_SCHED_GETCPU_SUPPORT instead, then use it to provide the prototype. No need to change the stub, as it is already a __weak symbol. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-yge89er9g90sc0v6k0a0r5tr@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-03perf tools: Force uncore events to system wide monitoringJiri Olsa
Make system wide (-a) the default option if no target was specified and one of following conditions is met: - there's no workload specified (current behaviour) - there is workload specified but all requested events are system wide ones Mixed events core/uncore with workload: $ perf stat -e 'uncore_cbox_0/clockticks/,cycles' sleep 1 Performance counter stats for 'sleep 1': <not supported> uncore_cbox_0/clockticks/ 980,489 cycles 1.000897406 seconds time elapsed Uncore event with workload: $ perf stat -e 'uncore_cbox_0/clockticks/' sleep 1 Performance counter stats for 'system wide': 281,473,897,192,670 uncore_cbox_0/clockticks/ 1.000833784 seconds time elapsed Committer note: When testing I realized the default case for !root, i.e. no events passed via -e, was broke by v2 of this patch, reported and after a patch provided by Jiri it is back working: [acme@jouet linux]$ perf stat usleep 1 Performance counter stats for 'usleep 1': 0.401335 task-clock:u (msec) # 0.297 CPUs utilized 0 context-switches:u # 0.000 K/sec 0 cpu-migrations:u # 0.000 K/sec 48 page-faults:u # 0.120 M/sec 458,146 cycles:u # 1.142 GHz 245,113 instructions:u # 0.54 insn per cycle 47,991 branches:u # 119.578 M/sec 4,022 branch-misses:u # 8.38% of all branches 0.001350029 seconds time elapsed [acme@jouet linux]$ Suggested-and-Tested-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20170227094818.GA12764@krava Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit (git 2.34.1) at 2025-07-16 08:17:22 +0000