summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2022-08-01Merge tag 'slab-for-5.20_or_6.0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab Pull slab updates from Vlastimil Babka: - An addition of 'accounted' flag to slab allocation tracepoints to indicate memcg_kmem accounting, by Vasily - An optimization of memcg handling in freeing paths, by Muchun - Various smaller fixes and cleanups * tag 'slab-for-5.20_or_6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: mm/slab_common: move generic bulk alloc/free functions to SLOB mm/sl[au]b: use own bulk free function when bulk alloc failed mm: slab: optimize memcg_slab_free_hook() mm/tracing: add 'accounted' entry into output of allocation tracepoints tools/vm/slabinfo: Handle files in debugfs mm/slub: Simplify __kmem_cache_alias() mm, slab: fix bad alignments
2022-08-01tools bpftool: Don't display disassembler-four-args feature testAndres Freund
The feature check does not seem important enough to display. Requested-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andres Freund <andres@anarazel.de> Acked-by: Quentin Monnet <quentin@isovalent.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Ben Hutchings <benh@debian.org> Cc: Quentin Monnet <quentin@isovalent.com> Cc: Sedat Dilek <sedat.dilek@gmail.com> Cc: bpf@vger.kernel.org Link: http://lore.kernel.org/lkml/20220622181918.ykrs5rsnmx3og4sv@alap3.anarazel.de Link: https://lore.kernel.org/r/20220801013834.156015-9-andres@anarazel.de Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-01tools bpftool: Fix compilation error with new binutilsAndres Freund
binutils changed the signature of init_disassemble_info(), which now causes compilation to fail for tools/bpf/bpftool/jit_disasm.c, e.g. on debian unstable. Relevant binutils commit: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=60a3da00bd5407f07 Wire up the feature test and switch to init_disassemble_info_compat(), which were introduced in prior commits, fixing the compilation failure. I verified that bpftool can still disassemble bpf programs, both with an old and new dis-asm.h API. There are no output changes for plain and json formats. When comparing the output from old binutils (2.35) to new bintuils with the patch (upstream snapshot) there are a few output differences, but they are unrelated to this patch. An example hunk is: 2f: pop %r14 31: pop %r13 33: pop %rbx - 34: leaveq - 35: retq + 34: leave + 35: ret Signed-off-by: Andres Freund <andres@anarazel.de> Acked-by: Quentin Monnet <quentin@isovalent.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Ben Hutchings <benh@debian.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Quentin Monnet <quentin@isovalent.com> Cc: Sedat Dilek <sedat.dilek@gmail.com> Cc: bpf@vger.kernel.org Link: http://lore.kernel.org/lkml/20220622181918.ykrs5rsnmx3og4sv@alap3.anarazel.de Link: https://lore.kernel.org/r/20220801013834.156015-8-andres@anarazel.de Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-01tools bpf_jit_disasm: Don't display disassembler-four-args feature testAndres Freund
The feature check does not seem important enough to display. Suggested-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andres Freund <andres@anarazel.de> Acked-by: Quentin Monnet <quentin@isovalent.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Ben Hutchings <benh@debian.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Quentin Monnet <quentin@isovalent.com> Cc: Sedat Dilek <sedat.dilek@gmail.com> Cc: bpf@vger.kernel.org Link: http://lore.kernel.org/lkml/20220622181918.ykrs5rsnmx3og4sv@alap3.anarazel.de Link: https://lore.kernel.org/r/20220801013834.156015-7-andres@anarazel.de Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-01tools bpf_jit_disasm: Fix compilation error with new binutilsAndres Freund
binutils changed the signature of init_disassemble_info(), which now causes compilation to fail for tools/bpf/bpf_jit_disasm.c, e.g. on debian unstable. Relevant binutils commit: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=60a3da00bd5407f07 Wire up the feature test and switch to init_disassemble_info_compat(), which were introduced in prior commits, fixing the compilation failure. I verified that bpf_jit_disasm can still disassemble bpf programs, both with the old and new dis-asm.h API. With old binutils there's no change in output before/after this patch. When comparing the output from old binutils (2.35) to new bintuils with the patch (upstream snapshot) there are a few output differences, but they are unrelated to this patch. An example hunk is: f4: mov %r14,%rsi f7: mov %r15,%rdx fa: mov $0x2a,%ecx - ff: callq 0xffffffffea8c4988 + ff: call 0xffffffffea8c4988 104: test %rax,%rax 107: jge 0x0000000000000110 109: xor %eax,%eax - 10b: jmpq 0x0000000000000073 + 10b: jmp 0x0000000000000073 110: cmp $0x16,%rax However, I had to use an older kernel to generate the bpf_jit_enabled = 2 output, as that has been broken since 5.18 / 1022a5498f6f745c ("bpf, x86_64: Use bpf_jit_binary_pack_alloc"). https://lore.kernel.org/20220703030210.pmjft7qc2eajzi6c@alap3.anarazel.de Signed-off-by: Andres Freund <andres@anarazel.de> Acked-by: Quentin Monnet <quentin@isovalent.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Ben Hutchings <benh@debian.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Quentin Monnet <quentin@isovalent.com> Cc: Sedat Dilek <sedat.dilek@gmail.com> Cc: bpf@vger.kernel.org Link: http://lore.kernel.org/lkml/20220622181918.ykrs5rsnmx3og4sv@alap3.anarazel.de Link: https://lore.kernel.org/r/20220801013834.156015-6-andres@anarazel.de Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-01tools perf: Fix compilation error with new binutilsAndres Freund
binutils changed the signature of init_disassemble_info(), which now causes compilation failures for tools/perf/util/annotate.c, e.g. on debian unstable. Relevant binutils commit: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=60a3da00bd5407f07 Wire up the feature test and switch to init_disassemble_info_compat(), which were introduced in prior commits, fixing the compilation failure. I verified that perf can still disassemble bpf programs by using bpftrace under load, recording a perf trace, and then annotating the bpf "function" with and without the changes. With old binutils there's no change in output before/after this patch. When comparing the output from old binutils (2.35) to new bintuils with the patch (upstream snapshot) there are a few output differences, but they are unrelated to this patch. An example hunk is: 1.15 : 55:mov %rbp,%rdx 0.00 : 58:add $0xfffffffffffffff8,%rdx 0.00 : 5c:xor %ecx,%ecx - 1.03 : 5e:callq 0xffffffffe12aca3c + 1.03 : 5e:call 0xffffffffe12aca3c 0.00 : 63:xor %eax,%eax - 2.18 : 65:leaveq - 2.82 : 66:retq + 2.18 : 65:leave + 2.82 : 66:ret Signed-off-by: Andres Freund <andres@anarazel.de> Acked-by: Quentin Monnet <quentin@isovalent.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Ben Hutchings <benh@debian.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Sedat Dilek <sedat.dilek@gmail.com> Cc: bpf@vger.kernel.org Link: http://lore.kernel.org/lkml/20220622181918.ykrs5rsnmx3og4sv@alap3.anarazel.de Link: https://lore.kernel.org/r/20220801013834.156015-5-andres@anarazel.de Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-01tools include: add dis-asm-compat.h to handle version differencesAndres Freund
binutils changed the signature of init_disassemble_info(), which now causes compilation failures for tools/{perf,bpf}, e.g. on debian unstable. Relevant binutils commit: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=60a3da00bd5407f07 This commit introduces a wrapper for init_disassemble_info(), to avoid spreading #ifdef DISASM_INIT_STYLED to a bunch of places. Subsequent commits will use it to fix the build failures. It likely is worth adding a wrapper for disassember(), to avoid the already existing DISASM_FOUR_ARGS_SIGNATURE ifdefery. Signed-off-by: Andres Freund <andres@anarazel.de> Signed-off-by: Ben Hutchings <benh@debian.org> Acked-by: Quentin Monnet <quentin@isovalent.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Ben Hutchings <benh@debian.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Quentin Monnet <quentin@isovalent.com> Cc: Sedat Dilek <sedat.dilek@gmail.com> Cc: bpf@vger.kernel.org Link: http://lore.kernel.org/lkml/20220622181918.ykrs5rsnmx3og4sv@alap3.anarazel.de Link: https://lore.kernel.org/r/20220801013834.156015-4-andres@anarazel.de Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-01tools build: Don't display disassembler-four-args feature testAndres Freund
The feature check does not seem important enough to display. Suggested by Jiri Olsa. Signed-off-by: Andres Freund <andres@anarazel.de> Acked-by: Quentin Monnet <quentin@isovalent.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Ben Hutchings <benh@debian.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Quentin Monnet <quentin@isovalent.com> Cc: Sedat Dilek <sedat.dilek@gmail.com> Cc: bpf@vger.kernel.org Link: http://lore.kernel.org/lkml/20220622181918.ykrs5rsnmx3og4sv@alap3.anarazel.de Link: https://lore.kernel.org/r/20220801013834.156015-3-andres@anarazel.de Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-01tools build: Add feature test for init_disassemble_info API changesAndres Freund
binutils changed the signature of init_disassemble_info(), which now causes compilation failures for tools/{perf,bpf}, e.g. on debian unstable. Relevant binutils commit: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=60a3da00bd5407f07 This commit adds a feature test to detect the new signature. Subsequent commits will use it to fix the build failures. Signed-off-by: Andres Freund <andres@anarazel.de> Acked-by: Quentin Monnet <quentin@isovalent.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Ben Hutchings <benh@debian.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Quentin Monnet <quentin@isovalent.com> Cc: Sedat Dilek <sedat.dilek@gmail.com> Cc: bpf@vger.kernel.org Link: http://lore.kernel.org/lkml/20220622181918.ykrs5rsnmx3og4sv@alap3.anarazel.de Link: https://lore.kernel.org/r/20220801013834.156015-2-andres@anarazel.de Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-01perf test: Add ARM SPE system wide testNamhyung Kim
In the past it had a problem not setting the pid/tid on the sample correctly when system-wide mode is used. Although it's fixed now it'd be nice if we have a test case for it. Reviewed-by: German Gomez <german.gomez@arm.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Leo Yan <leo.yan@linaro.org> Cc: German Gomez <german.gomez@arm.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20220701230932.1000495-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-01perf tools: Rework prologue generation codeJiri Olsa
Some functions we use for bpf prologue generation are going to be deprecated. This change reworks current code not to use them. We need to replace following functions/struct: bpf_program__set_prep bpf_program__nth_fd struct bpf_prog_prep_result Currently we use bpf_program__set_prep to hook perf callback before program is loaded and provide new instructions with the prologue. We replace this function/ality by taking instructions for specific program, attaching prologue to them and load such new ebpf programs with prologue using separate bpf_prog_load calls (outside libbpf load machinery). Before we can take and use program instructions, we need libbpf to actually load it. This way we get the final shape of its instructions with all relocations and verifier adjustments). There's one glitch though.. perf kprobe program already assumes generated prologue code with proper values in argument registers, so loading such program directly will fail in the verifier. That's where the fallback pre-load handler fits in and prepends the initialization code to the program. Once such program is loaded we take its instructions, cut off the initialization code and prepend the prologue. I know.. sorry ;-) To have access to the program when loading this patch adds support to register 'fallback' section handler to take care of perf kprobe programs. The fallback means that it handles any section definition besides the ones that libbpf handles. The handler serves two purposes: - allows perf programs to have special arguments in section name - allows perf to use pre-load callback where we can attach init code (zeroing all argument registers) to each perf program Suggested-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/20220616202214.70359-2-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-01perf bpf: Convert legacy map definition to BTF-definedJiri Olsa
The libbpf is switching off support for legacy map definitions [1], which will break the perf llvm tests. Moving the base source map definition to BTF-defined, so we need to use -g compile option for to add debug/BTF info. [1] https://lore.kernel.org/bpf/20220627211527.2245459-1-andrii@kernel.org/ Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: bpf@vger.kernel.org Link: https://lore.kernel.org/r/20220704152721.352046-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-01selftests: kvm: set rax before vmcallAndrei Vagin
kvm_hypercall has to place the hypercall number in rax. Trace events show that kvm_pv_test doesn't work properly: kvm_pv_test-53132: kvm_hypercall: nr 0x0 a0 0x0 a1 0x0 a2 0x0 a3 0x0 kvm_pv_test-53132: kvm_hypercall: nr 0x0 a0 0x0 a1 0x0 a2 0x0 a3 0x0 kvm_pv_test-53132: kvm_hypercall: nr 0x0 a0 0x0 a1 0x0 a2 0x0 a3 0x0 With this change, it starts working as expected: kvm_pv_test-54285: kvm_hypercall: nr 0x5 a0 0x0 a1 0x0 a2 0x0 a3 0x0 kvm_pv_test-54285: kvm_hypercall: nr 0xa a0 0x0 a1 0x0 a2 0x0 a3 0x0 kvm_pv_test-54285: kvm_hypercall: nr 0xb a0 0x0 a1 0x0 a2 0x0 a3 0x0 Signed-off-by: Andrei Vagin <avagin@google.com> Message-Id: <20220722230241.1944655-5-avagin@google.com> Fixes: ac4a4d6de22e ("selftests: kvm: test enforcement of paravirtual cpuid features") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-08-01perf symbol: Fail to read phdr workaroundIan Rogers
The perf jvmti agent doesn't create program headers, in this case fallback on section headers as happened previously. Committer notes: To test this, from a public post by Ian: 1) download a Java workload dacapo-9.12-MR1-bach.jar from https://sourceforge.net/projects/dacapobench/ 2) build perf such as "make -C tools/perf O=/tmp/perf NO_LIBBFD=1" it should detect Java and create /tmp/perf/libperf-jvmti.so 3) run perf with the jvmti agent: perf record -k 1 java -agentpath:/tmp/perf/libperf-jvmti.so -jar dacapo-9.12-MR1-bach.jar -n 10 fop 4) run perf inject: perf inject -i perf.data -o perf-injected.data -j 5) run perf report perf report -i perf-injected.data | grep org.apache.fop With this patch reverted I see lots of symbols like: 0.00% java jitted-388040-4656.so [.] org.apache.fop.fo.FObj.bind(org.apache.fop.fo.PropertyList) With the patch (2d86612aacb7805f ("perf symbol: Correct address for bss symbols")) I see lots of: dso__load_sym_internal: failed to find program header for symbol: Lorg/apache/fop/fo/FObj;bind(Lorg/apache/fop/fo/PropertyList;)V st_value: 0x40 Fixes: 2d86612aacb7805f ("perf symbol: Correct address for bss symbols") Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20220731164923.691193-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-01perf lock: Implement cpu and task filters for BPFNamhyung Kim
Add -a/--all-cpus and -C/--cpu options for cpu filtering. Also -p/--pid and --tid options are added for task filtering. The short -t option is taken for --threads already. Tracking the command line workload is possible as well. $ sudo perf lock contention -a -b sleep 1 Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Blake Jones <blakejones@google.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Waiman Long <longman@redhat.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20220729200756.666106-4-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-01perf lock: Use BPF for lock contention analysisNamhyung Kim
Add -b/--use-bpf option to use BPF to collect lock contention stats. For simplicity it now runs system-wide and requires C-c to stop. Upcoming changes will add the usual filtering. $ sudo perf lock con -b ^C contended total wait max wait avg wait type caller 42 192.67 us 13.64 us 4.59 us spinlock queue_work_on+0x20 23 85.54 us 10.28 us 3.72 us spinlock worker_thread+0x14a 6 13.92 us 6.51 us 2.32 us mutex kernfs_iop_permission+0x30 3 11.59 us 10.04 us 3.86 us mutex kernfs_dop_revalidate+0x3c 1 7.52 us 7.52 us 7.52 us spinlock kthread+0x115 1 7.24 us 7.24 us 7.24 us rwlock:W sys_epoll_wait+0x148 2 7.08 us 3.99 us 3.54 us spinlock delayed_work_timer_fn+0x1b 1 6.41 us 6.41 us 6.41 us spinlock idle_balance+0xa06 2 2.50 us 1.83 us 1.25 us mutex kernfs_iop_lookup+0x2f 1 1.71 us 1.71 us 1.71 us mutex kernfs_iop_getattr+0x2c Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Blake Jones <blakejones@google.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Waiman Long <longman@redhat.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20220729200756.666106-3-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-01perf lock: Pass machine pointer to is_lock_function()Namhyung Kim
This is a preparation for later change to expose the function externally so that it can be used without the implicit session data. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Blake Jones <blakejones@google.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Waiman Long <longman@redhat.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20220729200756.666106-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-01selftests/powerpc: Avoid GCC 12 uninitialised variable warningMichael Ellerman
GCC 12 thinks that `actual` might be used uninitialised. It's not, the use is guarded by `bad_mmcr2` which is only set to true at the same point where `actual` is initialised. cycles_with_mmcr2_test.c: In function ‘cycles_with_mmcr2’: cycles_with_mmcr2_test.c:81:17: error: ‘actual’ may be used uninitialized [-Werror=maybe-uninitialized] 81 | printf("Bad MMCR2 value seen is 0x%lx\n", actual); Silence the warning by initialising `actual` to zero. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220801113746.802046-1-mpe@ellerman.id.au
2022-08-01perf test: Add user space counter reading testsIan Rogers
These tests are based on test_stat_user_read in tools/lib/perf/tests/test-evsel.c. The tests are modified to skip if perf_event_open fails or rdpmc isn't supported. Committer testing: ⬢[acme@toolbox perf]$ perf test "mmap interface" 4: mmap interface tests : 4.1: Read samples using the mmap interface : Skip (permissions) ⬢[acme@toolbox perf]$ [root@five ~]# perf test "mmap interface" 4: mmap interface tests : 4.1: Read samples using the mmap interface : Ok [root@five ~]# Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rob Herring <robh@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20220719223946.176299-4-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-01perf test: Remove x86 rdpmc testIan Rogers
This test has been superseded by test_stat_user_read in: tools/lib/perf/tests/test-evsel.c The updated test doesn't divide-by-0 when running time of a counter is 0. It also supports ARM64. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Rob Herring <robh@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20220719223946.176299-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-01selftests: KVM: Add exponent check for boolean statsOliver Upton
The only sensible exponent for a boolean stat is 0. Add a test assertion requiring all boolean statistics to have an exponent of 0. Signed-off-by: Oliver Upton <oupton@google.com> Reviewed-by: Andrew Jones <andrew.jones@linux.dev> Message-Id: <20220719143134.3246798-4-oliver.upton@linux.dev> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-08-01selftests: KVM: Provide descriptive assertions in kvm_binary_stats_testOliver Upton
As it turns out, tests sometimes fail. When that is the case, packing the test assertion with as much relevant information helps track down the problem more quickly. Sharpen up the stat descriptor assertions in kvm_binary_stats_test to more precisely describe the reason for the test assertion and which stat is to blame. Signed-off-by: Oliver Upton <oupton@google.com> Reviewed-by: Andrew Jones <andrew.jones@linux.dev> Message-Id: <20220719143134.3246798-3-oliver.upton@linux.dev> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-08-01selftests: KVM: Check stat name before other fieldsOliver Upton
In order to provide more useful test assertions that describe the broken stats descriptor, perform sanity check on the stat name before any other descriptor field. While at it, avoid dereferencing the name field if the sanity check fails as it is more likely to contain garbage. Signed-off-by: Oliver Upton <oupton@google.com> Reviewed-by: Andrew Jones <andrew.jones@linux.dev> Message-Id: <20220719143134.3246798-2-oliver.upton@linux.dev> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-08-01Merge remote-tracking branch 'torvalds/master' into perf/coreArnaldo Carvalho de Melo
To pick up the fixes that went upstream via acme/perf/urgent and to get to v5.19. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-01Merge tag 'kvmarm-5.20' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 updates for 5.20: - Unwinder implementations for both nVHE modes (classic and protected), complete with an overflow stack - Rework of the sysreg access from userspace, with a complete rewrite of the vgic-v3 view to allign with the rest of the infrastructure - Disagregation of the vcpu flags in separate sets to better track their use model. - A fix for the GICv2-on-v3 selftest - A small set of cosmetic fixes
2022-08-01Merge remote-tracking branch 'kvm/next' into kvm-next-5.20Paolo Bonzini
KVM/s390, KVM/x86 and common infrastructure changes for 5.20 x86: * Permit guests to ignore single-bit ECC errors * Fix races in gfn->pfn cache refresh; do not pin pages tracked by the cache * Intel IPI virtualization * Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS * PEBS virtualization * Simplify PMU emulation by just using PERF_TYPE_RAW events * More accurate event reinjection on SVM (avoid retrying instructions) * Allow getting/setting the state of the speaker port data bit * Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls are inconsistent * "Notify" VM exit (detect microarchitectural hangs) for Intel * Cleanups for MCE MSR emulation s390: * add an interface to provide a hypervisor dump for secure guests * improve selftests to use TAP interface * enable interpretive execution of zPCI instructions (for PCI passthrough) * First part of deferred teardown * CPU Topology * PV attestation * Minor fixes Generic: * new selftests API using struct kvm_vcpu instead of a (vm, id) tuple x86: * Use try_cmpxchg64 instead of cmpxchg64 * Bugfixes * Ignore benign host accesses to PMU MSRs when PMU is disabled * Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior * x86/MMU: Allow NX huge pages to be disabled on a per-vm basis * Port eager page splitting to shadow MMU as well * Enable CMCI capability by default and handle injected UCNA errors * Expose pid of vcpu threads in debugfs * x2AVIC support for AMD * cleanup PIO emulation * Fixes for LLDT/LTR emulation * Don't require refcounted "struct page" to create huge SPTEs x86 cleanups: * Use separate namespaces for guest PTEs and shadow PTEs bitmasks * PIO emulation * Reorganize rmap API, mostly around rmap destruction * Do not workaround very old KVM bugs for L0 that runs with nesting enabled * new selftests API for CPUID
2022-07-31rtla: Define syscall numbers for riscvAndreas Schwab
RISC-V uses the same (generic) syscall numbers as ARM64. Link: https://lkml.kernel.org/r/mvma68wl2ul.fsf@suse.de Signed-off-by: Andreas Schwab <schwab@suse.de> Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-07-31rtla: Fix double freeAndreas Schwab
Avoid double free by making trace_instance_destroy indempotent. When trace_instance_init fails, it calls trace_instance_destroy, but its only caller osnoise_destroy_tool calls it again. Link: https://lkml.kernel.org/r/mvmilnlkyzx.fsf_-_@suse.de Fixes: 0605bf009f18 ("rtla: Add osnoise tool") Signed-off-by: Andreas Schwab <schwab@suse.de> Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-07-31rtla: Fix Makefile when called from -C tools/Daniel Bristot de Oliveira
Sedat Dilek reported an error on rtla Makefile when running: $ make -C tools/ clean [...] make[2]: Entering directory '/home/dileks/src/linux-kernel/git/tools/tracing/rtla' [...] '/home/dileks/src/linux-kernel/git/Documentation/tools/rtla' /bin/sh: 1: test: rtla-make[2]:: unexpected operator <------ The problem rm: cannot remove '/home/dileks/src/linux-kernel/git': Is a directory make[2]: *** [Makefile:120: clean] Error 1 make[2]: Leaving directory This occurred because the rtla calls kernel's Makefile to get the version in silence mode, e.g., $ make -sC ../../.. kernelversion 5.19.0-rc4 But the -s is being ignored when rtla's makefile is called indirectly, so the output looks like this: $ make -C ../../.. kernelversion make: Entering directory '/root/linux' 5.19.0-rc4 make: Leaving directory '/root/linux' Using 'grep -v make' avoids this problem, e.g., $ make -C ../../.. kernelversion | grep -v make 5.19.0-rc4 Thus, add | grep -v make. Link: https://lkml.kernel.org/r/870c02d4d97a921f02a31fa3b229fc549af61a20.1657747763.git.bristot@kernel.org Fixes: 8619e32825fd ("rtla: Follow kernel version") Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-07-30rv/monitor: Add the wwnr monitorDaniel Bristot de Oliveira
Per task wakeup while not running (wwnr) monitor. This model is broken, the reason is that a task can be running in the processor without being set as RUNNABLE. Think about a task about to sleep: 1: set_current_state(TASK_UNINTERRUPTIBLE); 2: schedule(); And then imagine an IRQ happening in between the lines one and two, waking the task up. BOOM, the wakeup will happen while the task is running. Q: Why do we need this model, so? A: To test the reactors. Link: https://lkml.kernel.org/r/473c0fc39967250fdebcff8b620311c11dccad30.1659052063.git.bristot@kernel.org Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marco Elver <elver@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Gabriele Paoloni <gpaoloni@redhat.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: Tao Zhou <tao.zhou@linux.dev> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-trace-devel@vger.kernel.org Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-07-30rv/monitor: Add the wip monitorDaniel Bristot de Oliveira
The wakeup in preemptive (wip) monitor verifies if the wakeup events always take place with preemption disabled: | | v #==================# H preemptive H <+ #==================# | | | | preempt_disable | preempt_enable v | sched_waking +------------------+ | +--------------- | | | | | non_preemptive | | +--------------> | | -+ +------------------+ The wakeup event always takes place with preemption disabled because of the scheduler synchronization. However, because the preempt_count and its trace event are not atomic with regard to interrupts, some inconsistencies might happen. The documentation illustrates one of these cases. Link: https://lkml.kernel.org/r/c98ca678df81115fddc04921b3c79720c836b18f.1659052063.git.bristot@kernel.org Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marco Elver <elver@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Gabriele Paoloni <gpaoloni@redhat.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: Tao Zhou <tao.zhou@linux.dev> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-trace-devel@vger.kernel.org Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-07-30Documentation/rv: Add deterministic automata monitor synthesis documentationDaniel Bristot de Oliveira
Add the da_monitor_synthesis.rst introduces some concepts behind the Deterministic Automata (DA) monitor synthesis and interface. Link: https://lkml.kernel.org/r/7873bdb7b2e5d2bc0b2eb6ca0b324af9a0ba27a0.1659052063.git.bristot@kernel.org Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marco Elver <elver@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Gabriele Paoloni <gpaoloni@redhat.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: Tao Zhou <tao.zhou@linux.dev> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-trace-devel@vger.kernel.org Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-07-30tools/rv: Add dot2kDaniel Bristot de Oliveira
transform .dot file into kernel rv monitor usage: dot2k [-h] -d DOT_FILE -t MONITOR_TYPE [-n MODEL_NAME] [-D DESCRIPTION] optional arguments: -h, --help show this help message and exit -d DOT_FILE, --dot DOT_FILE -t MONITOR_TYPE, --monitor_type MONITOR_TYPE -n MODEL_NAME, --model_name MODEL_NAME -D DESCRIPTION, --description DESCRIPTION Link: https://lkml.kernel.org/r/083b3ae61e5a62c1e2e5d08009baa91f82181618.1659052063.git.bristot@kernel.org Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marco Elver <elver@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Gabriele Paoloni <gpaoloni@redhat.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: Tao Zhou <tao.zhou@linux.dev> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-trace-devel@vger.kernel.org Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-07-30Documentation/rv: Add deterministic automaton documentationDaniel Bristot de Oliveira
Add documentation about deterministic automaton and its possible representations (formal, graphic, .dot and C). Link: https://lkml.kernel.org/r/387edaed87630bd5eb37c4275045dfd229700aa6.1659052063.git.bristot@kernel.org Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marco Elver <elver@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Gabriele Paoloni <gpaoloni@redhat.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: Tao Zhou <tao.zhou@linux.dev> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-trace-devel@vger.kernel.org Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-07-30tools/rv: Add dot2cDaniel Bristot de Oliveira
dot2c is a tool that transforms an automata in the graphiviz .dot file into an C representation of the automata. usage: dot2c [-h] dot_file dot2c: converts a .dot file into a C structure positional arguments: dot_file The dot file to be converted optional arguments: -h, --help show this help message and exit Link: https://lkml.kernel.org/r/b26204ba9509c80bcda31b76cdea31ddb188cd24.1659052063.git.bristot@kernel.org Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marco Elver <elver@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Gabriele Paoloni <gpaoloni@redhat.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: Tao Zhou <tao.zhou@linux.dev> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-trace-devel@vger.kernel.org Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-07-29Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski
Andrii Nakryiko says: ==================== bpf-next 2022-07-29 We've added 22 non-merge commits during the last 4 day(s) which contain a total of 27 files changed, 763 insertions(+), 120 deletions(-). The main changes are: 1) Fixes to allow setting any source IP with bpf_skb_set_tunnel_key() helper, from Paul Chaignon. 2) Fix for bpf_xdp_pointer() helper when doing sanity checking, from Joanne Koong. 3) Fix for XDP frame length calculation, from Lorenzo Bianconi. 4) Libbpf BPF_KSYSCALL docs improvements and fixes to selftests to accommodate s390x quirks with socketcall(), from Ilya Leoshkevich. 5) Allow/denylist and CI configs additions to selftests/bpf to improve BPF CI, from Daniel Müller. 6) BPF trampoline + ftrace follow up fixes, from Song Liu and Xu Kuohai. 7) Fix allocation warnings in netdevsim, from Jakub Kicinski. 8) bpf_obj_get_opts() libbpf API allowing to provide file flags, from Joe Burton. 9) vsnprintf usage fix in bpf_snprintf_btf(), from Fedor Tokarev. 10) Various small fixes and clean ups, from Daniel Müller, Rongguang Wei, Jörn-Thorben Hinz, Yang Li. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (22 commits) bpf: Remove unneeded semicolon libbpf: Add bpf_obj_get_opts() netdevsim: Avoid allocation warnings triggered from user space bpf: Fix NULL pointer dereference when registering bpf trampoline bpf: Fix test_progs -j error with fentry/fexit tests selftests/bpf: Bump internal send_signal/send_signal_tracepoint timeout bpftool: Don't try to return value from void function in skeleton bpftool: Replace sizeof(arr)/sizeof(arr[0]) with ARRAY_SIZE macro bpf: btf: Fix vsnprintf return value check libbpf: Support PPC in arch_specific_syscall_pfx selftests/bpf: Adjust vmtest.sh to use local kernel configuration selftests/bpf: Copy over libbpf configs selftests/bpf: Sort configuration selftests/bpf: Attach to socketcall() in test_probe_user libbpf: Extend BPF_KSYSCALL documentation bpf, devmap: Compute proper xdp_frame len redirecting frames bpf: Fix bpf_xdp_pointer return pointer selftests/bpf: Don't assign outer source IP to host bpf: Set flow flag to allow any source IP in bpf_tunnel_key geneve: Use ip_tunnel_key flow flags in route lookups ... ==================== Link: https://lore.kernel.org/r/20220729230948.1313527-1-andrii@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-29mm/hmm: add a test for cross device private faultsRalph Campbell
Add a simple test case for when hmm_range_fault() is called with the HMM_PFN_REQ_FAULT flag and a device private PTE is found for a device other than the hmm_range::dev_private_owner. This should cause the page to be faulted back to system memory from the other device and the PFN returned in the output array. Also, remove a piece of code that unnecessarily unmaps part of the buffer. Link: https://lkml.kernel.org/r/20220727000837.4128709-3-rcampbell@nvidia.com Link: https://lkml.kernel.org/r/20220725183615.4118795-3-rcampbell@nvidia.com Signed-off-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Cc: Felix Kuehling <felix.kuehling@amd.com> Cc: Philip Yang <Philip.Yang@amd.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-29selftests: add soft-dirty into run_vmtests.shPeter Xu
Link: https://lkml.kernel.org/r/20220725142048.30450-4-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-29selftests: soft-dirty: add test for mprotectPeter Xu
Add two soft-dirty test cases for mprotect() on both anon or file. Link: https://lkml.kernel.org/r/20220725142048.30450-3-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-29selftest/vm: uninitialized variable in main()Dan Carpenter
Initialize "length" to zero by default. Link: https://lkml.kernel.org/r/YtZzjvHXVXMXxpXO@kili Fixes: ff712a627f72 ("selftests/vm: cleanup hugetlb file after mremap test") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-29tools/testing/selftests/vm/hugetlb-madvise.c: silence uninitialized variable ↵Dan Carpenter
warning This code just reads from memory without caring about the data itself. However static checkers complain that "tmp" is never properly initialized. Initialize it to zero and change the name to "dummy" to show that we don't care about the value stored in it. Link: https://lkml.kernel.org/r/YtZ8mKJmktA2GaHB@kili Fixes: c4b6cb884011 ("selftests/vm: add hugetlb madvise MADV_DONTNEED MADV_REMOVE test") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Souptick Joarder (HPE) <jrdr.linux@gmail.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-29tools/vm/page_owner_sort.c: adjust the indent in is_need()Yixuan Cao
I noticed one more indentation than necessary in is_need(). Link: https://lkml.kernel.org/r/20220717195506.7602-1-caoyixuan2019@email.szu.edu.cn Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-29selftests/vm: skip 128TBswitch on unsupported archAdam Sindelar
The test va_128TBswitch.c exercises a feature only supported on PPC and x86_64, but it's run on other 64-bit archs as well. Before this patch, the test did nothing and returned 0 for KSFT_PASS. This patch makes it return the KSFT codes from kselftest.h, including KSFT_SKIP when appropriate. Verified on arm64 and x86_64. Link: https://lkml.kernel.org/r/20220704123813.427625-1-adam@wowsignal.io Signed-off-by: Adam Sindelar <adam@wowsignal.io> Cc: David Vernet <void@manifault.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-29selftests/vm: fix errno handling in mrelease_testAdam Sindelar
mrelease_test should return KSFT_SKIP when process_mrelease is not defined, but due to a perror call consuming the errno, it returns KSFT_FAIL. This patch decides the exit code before calling perror. [adam@wowsignal.io: fix remaining instances of errno mishandling] Link: https://lkml.kernel.org/r/20220706141602.10159-1-adam@wowsignal.io Link: https://lkml.kernel.org/r/20220704173351.19595-1-adam@wowsignal.io Fixes: 33776141b812 ("selftests: vm: add process_mrelease tests") Signed-off-by: Adam Sindelar <adam@wowsignal.io> Reviewed-by: David Vernet <void@manifault.com> Reviewed-by: Suren Baghdasaryan <surenb@google.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-29libbpf: Add bpf_obj_get_opts()Joe Burton
Add an extensible variant of bpf_obj_get() capable of setting the `file_flags` parameter. This parameter is needed to enable unprivileged access to BPF maps. Without a method like this, users must manually make the syscall. Signed-off-by: Joe Burton <jevburton@google.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220729202727.3311806-1-jevburton.kernel@gmail.com
2022-07-29Merge tag 'perf-tools-fixes-for-v5.19-2022-07-29' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix addresses for bss symbols, describing variables used in resolving data access in tools such as 'perf c2c' and 'perf mem'. - Skip symbols if SHF_ALLOC flag is not set, a technique used for listing deprecated symbols, its addresses are zeros, so not useful. - Remove undefined behavior from bpf_perf_object__next() when dealing with an empty bpf_objects_list list. - Make a ARM CoreSight disasm script work with both python2 and python3. - Sync x86's cpufeatures header with with the kernel sources. * tag 'perf-tools-fixes-for-v5.19-2022-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf bpf: Remove undefined behavior from bpf_perf_object__next() perf symbol: Skip symbols if SHF_ALLOC flag is not set perf symbol: Correct address for bss symbols perf scripts python: Let script to be python2 compliant tools headers cpufeatures: Sync with the kernel sources
2022-07-29selftests/bpf: Bump internal send_signal/send_signal_tracepoint timeoutDaniel Müller
The send_signal/send_signal_tracepoint is pretty flaky, with at least one failure in every ten runs on a few attempts I've tried it: > test_send_signal_common:PASS:pipe_c2p 0 nsec > test_send_signal_common:PASS:pipe_p2c 0 nsec > test_send_signal_common:PASS:fork 0 nsec > test_send_signal_common:PASS:skel_open_and_load 0 nsec > test_send_signal_common:PASS:skel_attach 0 nsec > test_send_signal_common:PASS:pipe_read 0 nsec > test_send_signal_common:PASS:pipe_write 0 nsec > test_send_signal_common:PASS:reading pipe 0 nsec > test_send_signal_common:PASS:reading pipe error: size 0 0 nsec > test_send_signal_common:FAIL:incorrect result unexpected incorrect result: actual 48 != expected 50 > test_send_signal_common:PASS:pipe_write 0 nsec > #139/1 send_signal/send_signal_tracepoint:FAIL The reason does not appear to be a correctness issue in the strict sense. Rather, we merely do not receive the signal we are waiting for within the provided timeout. Let's bump the timeout by a factor of ten. With that change I have not been able to reproduce the failure in 150+ iterations. I am also sneaking in a small simplification to the test_progs test selection logic. Signed-off-by: Daniel Müller <deso@posteo.net> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20220727182955.4044988-1-deso@posteo.net
2022-07-29Merge branches 'pm-devfreq', 'pm-qos', 'pm-tools' and 'pm-docs'Rafael J. Wysocki
Merge devfreq changes, PM QoS change, and power management tools and documentation changes for v5.20-rc1: - Add new devfreq driver for Mediatek CCI (Cache Coherent Interconnect) (Johnson Wang). - Convert the Samsung Exynos SoC Bus bindings to DT schema of exynos-bus.c (Krzysztof Kozlowski). - Address kernel-doc warnings by adding the description for unused fucntion parameters in devfreq core (Mauro Carvalho Chehab). - Use NULL to pass a null pointer rather than zero according to the function propotype in imx-bus.c (Colin Ian King). - Print error message instead of error interger value in tegra30-devfreq.c (Dmitry Osipenko). - Add checks to prevent setting negative frequency QoS limits for CPUs (Shivnandan Kumar). - Update the pm-graph suite of utilities to the latest revision 5.9 including multiple improvements (Todd Brandt). - Drop pme_interrupt reference from the PCI power management documentation (Mario Limonciello). * pm-devfreq: PM / devfreq: tegra30: Add error message for devm_devfreq_add_device() PM / devfreq: imx-bus: use NULL to pass a null pointer rather than zero PM / devfreq: shut up kernel-doc warnings dt-bindings: interconnect: samsung,exynos-bus: convert to dtschema PM / devfreq: mediatek: Introduce MediaTek CCI devfreq driver dt-bindings: interconnect: Add MediaTek CCI dt-bindings * pm-qos: PM: QoS: Add check to make sure CPU freq is non-negative * pm-tools: pm-graph v5.9 * pm-docs: Documentation: PM: Drop pme_interrupt reference
2022-07-29bpftool: Don't try to return value from void function in skeletonJörn-Thorben Hinz
A skeleton generated by bpftool previously contained a return followed by an expression in OBJ_NAME__detach(), which has return type void. This did not hurt, the bpf_object__detach_skeleton() called there returns void itself anyway, but led to a warning when compiling with e.g. -pedantic. Signed-off-by: Jörn-Thorben Hinz <jthinz@mailbox.tu-berlin.de> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20220726133203.514087-1-jthinz@mailbox.tu-berlin.de
2022-07-29bpftool: Replace sizeof(arr)/sizeof(arr[0]) with ARRAY_SIZE macroRongguang Wei
Use the ARRAY_SIZE macro and make the code more compact. Signed-off-by: Rongguang Wei <weirongguang@kylinos.cn> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20220726093045.3374026-1-clementwei90@163.com
generated by cgit (git 2.34.1) at 2025-07-15 16:42:24 +0000