summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2019-07-08Merge branch 'x86-cpu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 CPU feature updates from Thomas Gleixner: "Updates for x86 CPU features: - Support for UMWAIT/UMONITOR, which allows to use MWAIT and MONITOR instructions in user space to save power e.g. in HPC workloads which spin wait on synchronization points. The maximum time a MWAIT can halt in userspace is controlled by the kernel and can be adjusted by the sysadmin. - Speed up the MTRR handling code on CPUs which support cache self-snooping correctly. On those CPUs the wbinvd() invocations can be omitted which speeds up the MTRR setup by a factor of 50. - Support for the new x86 vendor Zhaoxin who develops processors based on the VIA Centaur technology. - Prevent 'cat /proc/cpuinfo' from affecting isolated NOHZ_FULL CPUs by sending IPIs to retrieve the CPU frequency and use the cached values instead. - The addition and late revert of the FSGSBASE support. The revert was required as it turned out that the code still has hard to diagnose issues. Yet another engineering trainwreck... - Small fixes, cleanups, improvements and the usual new Intel CPU family/model addons" * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits) x86/fsgsbase: Revert FSGSBASE support selftests/x86/fsgsbase: Fix some test case bugs x86/entry/64: Fix and clean up paranoid_exit x86/entry/64: Don't compile ignore_sysret if 32-bit emulation is enabled selftests/x86: Test SYSCALL and SYSENTER manually with TF set x86/mtrr: Skip cache flushes on CPUs with cache self-snooping x86/cpu/intel: Clear cache self-snoop capability in CPUs with known errata Documentation/ABI: Document umwait control sysfs interfaces x86/umwait: Add sysfs interface to control umwait maximum time x86/umwait: Add sysfs interface to control umwait C0.2 state x86/umwait: Initialize umwait control values x86/cpufeatures: Enumerate user wait instructions x86/cpu: Disable frequency requests via aperfmperf IPI for nohz_full CPUs x86/acpi/cstate: Add Zhaoxin processors support for cache flush policy in C3 ACPI, x86: Add Zhaoxin processors support for NONSTOP TSC x86/cpu: Create Zhaoxin processors architecture support file x86/cpu: Split Tremont based Atoms from the rest Documentation/x86/64: Add documentation for GS/FS addressing mode x86/elf: Enumerate kernel FSGSBASE capability in AT_HWCAP2 x86/cpu: Enable FSGSBASE on 64bit by default and add a chicken bit ...
2019-07-08Merge branch 'x86-entry-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 vsyscall updates from Thomas Gleixner: "Further hardening of the legacy vsyscall by providing support for execute only mode and switching the default to it. This prevents a certain class of attacks which rely on the vsyscall page being accessible at a fixed address in the canonical kernel address space" * 'x86-entry-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: selftests/x86: Add a test for process_vm_readv() on the vsyscall page x86/vsyscall: Add __ro_after_init to global variables x86/vsyscall: Change the default vsyscall mode to xonly selftests/x86/vsyscall: Verify that vsyscall=none blocks execution x86/vsyscall: Document odd SIGSEGV error code for vsyscalls x86/vsyscall: Show something useful on a read fault x86/vsyscall: Add a new vsyscall=xonly mode Documentation/admin: Remove the vsyscall=native documentation
2019-07-08Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "The timer and timekeeping departement delivers: Core: - The consolidation of the VDSO code into a generic library including the conversion of x86 and ARM64. Conversion of ARM and MIPS are en route through the relevant maintainer trees and should end up in 5.4. This gets rid of the unnecessary different copies of the same code and brings all architectures on the same level of VDSO functionality. - Make the NTP user space interface more robust by restricting the TAI offset to prevent undefined behaviour. Includes a selftest. - Validate user input in the compat settimeofday() syscall to catch invalid values which would be turned into valid values by a multiplication overflow - Consolidate the time accessors - Small fixes, improvements and cleanups all over the place Drivers: - Support for the NXP system counter, TI davinci timer - Move the Microsoft HyperV clocksource/events code into the drivers/clocksource directory so it can be shared between x86 and ARM64. - Overhaul of the Tegra driver - Delay timer support for IXP4xx - Small fixes, improvements and cleanups as usual" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits) time: Validate user input in compat_settimeofday() timer: Document TIMER_PINNED clocksource/drivers: Continue making Hyper-V clocksource ISA agnostic clocksource/drivers: Make Hyper-V clocksource ISA agnostic MAINTAINERS: Fix Andy's surname and the directory entries of VDSO hrtimer: Use a bullet for the returns bullet list arm64: vdso: Fix compilation with clang older than 8 arm64: compat: Fix __arch_get_hw_counter() implementation arm64: Fix __arch_get_hw_counter() implementation lib/vdso: Make delta calculation work correctly MAINTAINERS: Add entry for the generic VDSO library arm64: compat: No need for pre-ARMv7 barriers on an ARMv8 system arm64: vdso: Remove unnecessary asm-offsets.c definitions vdso: Remove superfluous #ifdef __KERNEL__ in vdso/datapage.h clocksource/drivers/davinci: Add support for clocksource clocksource/drivers/davinci: Add support for clockevents clocksource/drivers/tegra: Set up maximum-ticks limit properly clocksource/drivers/tegra: Cycles can't be 0 clocksource/drivers/tegra: Restore base address before cleanup clocksource/drivers/tegra: Add verbose definition for 1MHz constant ...
2019-07-08tools arch x86: Sync asm/cpufeatures.h with the with the kernelArnaldo Carvalho de Melo
To pick up the changes in: 6dbbf5ec9e1e ("x86/cpufeatures: Enumerate user wait instructions") b302e4b176d0 ("x86/cpufeatures: Enumerate the new AVX512 BFLOAT16 instructions") acec0ce081de ("x86/cpufeatures: Combine word 11 and 12 into a new scattered features word") cbb99c0f5887 ("x86/cpufeatures: Add FDP_EXCPTN_ONLY and ZERO_FCS_FDS") That don't affect anything in tools/. This silences this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h Cc: Aaron Lewis <aaronlewis@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/n/tip-y60wnyg2fuxi0hx7icruo9po@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-08Merge remote-tracking branch 'tip/perf/core' into perf/urgentArnaldo Carvalho de Melo
To pick up fixes. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-08Merge tag 'v5.2' into perf/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-08tools: bpftool: add completion for bpftool prog "loadall"Quentin Monnet
Bash completion for proposing the "loadall" subcommand is missing. Let's add it to the completion script. Add a specific case to propose "load" and "loadall" for completing: $ bpftool prog load ^ cursor is here Otherwise, completion considers that $command is in load|loadall and starts making related completions (file or directory names, as the number of words on the command line is below 6), when the only suggested keywords should be "load" and "loadall" until one has been picked and a space entered after that to move to the next word. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-08selftests/bpf: fix test_attach_probe map definitionAndrii Nakryiko
ef99b02b23ef ("libbpf: capture value in BTF type info for BTF-defined map defs") changed BTF-defined maps syntax, while independently merged 1e8611bbdfc9 ("selftests/bpf: add kprobe/uprobe selftests") added new test using outdated syntax of maps. This patch fixes this test after corresponding patch sets were merged. Fixes: ef99b02b23ef ("libbpf: capture value in BTF type info for BTF-defined map defs") Fixes: 1e8611bbdfc9 ("selftests/bpf: add kprobe/uprobe selftests") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-08selftests/bpf: add verifier tests for wide storesStanislav Fomichev
Make sure that wide stores are allowed at proper (aligned) addresses. Note that user_ip6 is naturally aligned on 8-byte boundary, so correct addresses are user_ip6[0] and user_ip6[2]. msg_src_ip6 is, however, aligned on a 4-byte bondary, so only msg_src_ip6[1] can be wide-stored. Cc: Andrii Nakryiko <andriin@fb.com> Cc: Yonghong Song <yhs@fb.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-08bpf: sync bpf.h to tools/Stanislav Fomichev
Sync user_ip6 & msg_src_ip6 comments. Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-08libbpf: add perf_buffer_ prefix to READMEAndrii Nakryiko
perf_buffer "object" is part of libbpf API now, add it to the list of libbpf function prefixes. Suggested-by: Daniel Borkman <daniel@iogearbox.net> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-08tools/bpftool: switch map event_pipe to libbpf's perf_bufferAndrii Nakryiko
Switch event_pipe implementation to rely on new libbpf perf buffer API (it's raw low-level variant). Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-08selftests/bpf: test perf buffer APIAndrii Nakryiko
Add test verifying perf buffer API functionality. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-08libbpf: auto-set PERF_EVENT_ARRAY size to number of CPUsAndrii Nakryiko
For BPF_MAP_TYPE_PERF_EVENT_ARRAY typically correct size is number of possible CPUs. This is impossible to specify at compilation time. This change adds automatic setting of PERF_EVENT_ARRAY size to number of system CPUs, unless non-zero size is specified explicitly. This allows to adjust size for advanced specific cases, while providing convenient and logical defaults. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-08libbpf: add perf buffer APIAndrii Nakryiko
BPF_MAP_TYPE_PERF_EVENT_ARRAY map is often used to send data from BPF program to user space for additional processing. libbpf already has very low-level API to read single CPU perf buffer, bpf_perf_event_read_simple(), but it's hard to use and requires a lot of code to set everything up. This patch adds perf_buffer abstraction on top of it, abstracting setting up and polling per-CPU logic into simple and convenient API, similar to what BCC provides. perf_buffer__new() sets up per-CPU ring buffers and updates corresponding BPF map entries. It accepts two user-provided callbacks: one for handling raw samples and one for get notifications of lost samples due to buffer overflow. perf_buffer__new_raw() is similar, but provides more control over how perf events are set up (by accepting user-provided perf_event_attr), how they are handled (perf_event_header pointer is passed directly to user-provided callback), and on which CPUs ring buffers are created (it's possible to provide a list of CPUs and corresponding map keys to update). This API allows advanced users fuller control. perf_buffer__poll() is used to fetch ring buffer data across all CPUs, utilizing epoll instance. perf_buffer__free() does corresponding clean up and unsets FDs from BPF map. All APIs are not thread-safe. User should ensure proper locking/coordination if used in multi-threaded set up. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-08Merge branches 'acpi-tables', 'acpi-osl', 'acpi-misc' and 'acpi-tools'Rafael J. Wysocki
* acpi-tables: ACPI: configfs: Resolve objects on host-directed table loads ACPI: tables: Allow BGRT to be overridden * acpi-osl: ACPI: OSL: Make a W=1 kernel-doc warning go away * acpi-misc: ACPI: Make AC and battery drivers available on !X86 * acpi-tools: ACPI: tools: Exclude tools/* from .gitignore patterns
2019-07-08Merge branches 'pm-opp', 'pm-misc', 'pm-avs' and 'pm-tools'Rafael J. Wysocki
* pm-opp: opp: Don't use IS_ERR on invalid supplies opp: Make dev_pm_opp_set_rate() handle freq = 0 to drop performance votes opp: Don't overwrite rounded clk rate opp: Allocate genpd_virt_devs from dev_pm_opp_attach_genpd() opp: Attach genpds to devices from within OPP core * pm-misc: PM / clk: Remove error message on out-of-memory condition drivers: base: power: clock_ops: Use of_clk_get_parent_count() * pm-avs: power: avs: smartreflex: no need to check return value of debugfs_create functions * pm-tools: cpupower : frequency-set -r option misses the last cpu in related cpu list cpupower: correct spelling of interval Add README and update pm-graph and sleepgraph docs Update to pm-graph 5.4 Update to pm-graph 5.3
2019-07-07selftests/tls: add test for poll() with data in TLS ULPJakub Kicinski
Add a test which checks if leftover record data in TLS layer correctly wakes up poll(). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-07tools build: Check if gettid() is available before providing helperArnaldo Carvalho de Melo
Laura reported that the perf build failed in fedora when we got a glibc that provides gettid(), which I reproduced using fedora rawhide with the glibc-devel-2.29.9000-26.fc31.x86_64 package. Add a feature check to avoid providing a gettid() helper in such systems. On a fedora rawhide system with this patch applied we now get: [root@7a5f55352234 perf]# grep gettid /tmp/build/perf/FEATURE-DUMP feature-gettid=1 [root@7a5f55352234 perf]# cat /tmp/build/perf/feature/test-gettid.make.output [root@7a5f55352234 perf]# ldd /tmp/build/perf/feature/test-gettid.bin linux-vdso.so.1 (0x00007ffc6b1f6000) libc.so.6 => /lib64/libc.so.6 (0x00007f04e0a74000) /lib64/ld-linux-x86-64.so.2 (0x00007f04e0c47000) [root@7a5f55352234 perf]# nm /tmp/build/perf/feature/test-gettid.bin | grep -w gettid U gettid@@GLIBC_2.30 [root@7a5f55352234 perf]# While on a fedora:29 system: [acme@quaco perf]$ grep gettid /tmp/build/perf/FEATURE-DUMP feature-gettid=0 [acme@quaco perf]$ cat /tmp/build/perf/feature/test-gettid.make.output test-gettid.c: In function ‘main’: test-gettid.c:8:9: error: implicit declaration of function ‘gettid’; did you mean ‘getgid’? [-Werror=implicit-function-declaration] return gettid(); ^~~~~~ getgid cc1: all warnings being treated as errors [acme@quaco perf]$ Reported-by: Laura Abbott <labbott@redhat.com> Tested-by: Laura Abbott <labbott@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lkml.kernel.org/n/tip-yfy3ch53agmklwu9o7rlgf9c@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-07perf jvmti: Address gcc string overflow warning for strncpy()Jiri Olsa
We are getting false positive gcc warning when we compile with gcc9 (9.1.1): CC jvmti/libjvmti.o In file included from /usr/include/string.h:494, from jvmti/libjvmti.c:5: In function ‘strncpy’, inlined from ‘copy_class_filename.constprop’ at jvmti/libjvmti.c:166:3: /usr/include/bits/string_fortified.h:106:10: error: ‘__builtin_strncpy’ specified bound depends on the length of the source argument [-Werror=stringop-overflow=] 106 | return __builtin___strncpy_chk (__dest, __src, __len, __bos (__dest)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ jvmti/libjvmti.c: In function ‘copy_class_filename.constprop’: jvmti/libjvmti.c:165:26: note: length computed here 165 | size_t file_name_len = strlen(file_name); | ^~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors As per Arnaldo's suggestion use strlcpy(), which does the same thing and keeps gcc silent. Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ben Gainey <ben.gainey@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20190531131321.GB1281@krava Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-07perf python: Remove -fstack-protector-strong if clang doesn't have itArnaldo Carvalho de Melo
Some distros put -fstack-protector-strong in the compiler flags to be used to build python extensions, but then, the clang version in that distro doesn't know about that, only gcc does. Check if that is the case and remove it from the set of options used to build the python binding with clang. Case at hand: oraclelinux:7 $ head -2 /etc/os-release NAME="Oracle Linux Server" VERSION="7.6" $ grep stack-protector /usr/lib64/python2.7/_sysconfigdata.py | head -1 | cut -c-120 'CFLAGS': '-fno-strict-aliasing -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --para $ gcc version 4.8.5 20150623 (Red Hat 4.8.5-36.0.1) (GCC) clang version 3.4.2 (tags/RELEASE_34/dot2-final) clang: error: unknown argument: '-fstack-protector-strong' clang: error: unknown argument: '-fstack-protector-strong' error: command 'clang' failed with exit status 1 cp: cannot stat '/tmp/build/perf/python_ext_build/lib/perf*.so': No such file or directory make[2]: *** [/tmp/build/perf/python/perf.so] Error 1 Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-brmp2415zxpbhz45etkgjoma@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-06perf annotate TUI browser: Do not use member from variable within its own ↵Arnaldo Carvalho de Melo
initialization Some compilers will complain when using a member of a struct to initialize another member, in the same struct initialization. For instance: debian:8 Debian clang version 3.5.0-10 (tags/RELEASE_350/final) (based on LLVM 3.5.0) oraclelinux:7 clang version 3.4.2 (tags/RELEASE_34/dot2-final) Produce: ui/browsers/annotate.c:104:12: error: variable 'ops' is uninitialized when used within its own initialization [-Werror,-Wuninitialized] (!ops.current_entry || ^~~ 1 error generated. So use an extra variable, initialized just before that struct, to have the value used in the expressions used to init two of the struct members. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: c298304bd747 ("perf annotate: Use a ops table for annotation_line__write()") Link: https://lkml.kernel.org/n/tip-f9nexro58q62l3o9hez8hr0i@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-06perf tests: Fix record+probe_libc_inet_pton.sh for powerpc64Seeteena Thoufeek
'probe libc's inet_pton & backtrace it with ping' testcase sometimes fails on powerpc because distro ping binary does not have symbol information and thus it prints "[unknown]" function name in the backtrace. Accept "[unknown]" as valid function name for powerpc as well. # perf test -v "probe libc's inet_pton & backtrace it with ping" Before: 59: probe libc's inet_pton & backtrace it with ping : --- start --- test child forked, pid 79695 ping 79718 [077] 96483.787025: probe_libc:inet_pton: (7fff83a754c8) 7fff83a754c8 __GI___inet_pton+0x8 (/usr/lib64/power9/libc-2.28.so) 7fff83a2b7a0 gaih_inet.constprop.7+0x1020 (/usr/lib64/power9/libc-2.28.so) 7fff83a2c170 getaddrinfo+0x160 (/usr/lib64/power9/libc-2.28.so) 1171830f4 [unknown] (/usr/bin/ping) FAIL: expected backtrace entry ".*\+0x[[:xdigit:]]+[[:space:]]\(.*/bin/ping.*\)$" got "1171830f4 [unknown] (/usr/bin/ping)" test child finished with -1 ---- end ---- probe libc's inet_pton & backtrace it with ping: FAILED! After: 59: probe libc's inet_pton & backtrace it with ping : --- start --- test child forked, pid 79085 ping 79108 [045] 96400.214177: probe_libc:inet_pton: (7fffbb9654c8) 7fffbb9654c8 __GI___inet_pton+0x8 (/usr/lib64/power9/libc-2.28.so) 7fffbb91b7a0 gaih_inet.constprop.7+0x1020 (/usr/lib64/power9/libc-2.28.so) 7fffbb91c170 getaddrinfo+0x160 (/usr/lib64/power9/libc-2.28.so) 132e830f4 [unknown] (/usr/bin/ping) test child finished with 0 ---- end ---- probe libc's inet_pton & backtrace it with ping: Ok Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com> Reviewed-by: Kim Phillips <kim.phillips@amd.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sandipan Das <sandipan@linux.ibm.com> Fixes: 1632936480a5 ("perf tests: Fix record+probe_libc_inet_pton.sh without ping's debuginfo") Link: http://lkml.kernel.org/r/1561630614-3216-1-git-send-email-s1seetee@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-06perf evsel: Do not rely on errno values for precise_ip fallbackJiri Olsa
Konstantin reported problem with default perf record command, which fails on some AMD servers, because of the default maximum precise config. The current fallback mechanism counts on getting ENOTSUP errno for precise_ip fails, but that's not the case on some AMD servers. We can fix this by removing the errno check completely, because the precise_ip fallback is separated. We can just try (if requested by evsel->precise_max) all possible precise_ip, and if one succeeds we win, if not, we continue with standard fallback. Reported-by: Konstantin Kharlamov <Hi-Angel@yandex.ru> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Monnet <quentin.monnet@netronome.com> Cc: Kim Phillips <kim.phillips@amd.com> Link: http://lkml.kernel.org/r/20190703080949.10356-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-06perf thread: Allow references to thread objects after machine__exit()Arnaldo Carvalho de Melo
Threads are created when we either synthesize PERF_RECORD_FORK events for pre-existing threads or when we receive PERF_RECORD_FORK events from the kernel as new threads get created. We then keep them in machine->threads[].entries rb trees till when we receive a PERF_RECORD_EXIT, i.e. that thread terminated. The thread object has a reference count that is grabbed when, for instance, we keep that thread referenced in struct hist_entry, in 'perf report' and 'perf top'. When we receive a PERF_RECORD_EXIT we remove the thread object from the rb tree and move it to the corresponding machine->threads[].dead list, then we do a thread__put(), dropping the reference we had for keeping it in the rb tree. In thread__put() we were assuming that when the reference count hit zero we should remove it from the dead list by simply doing a list_del_init(&thread->node). That works well when all the thread lifetime is during the machine that has the list heads lifetime, since we know that we can do the list_del_init() and it will update the 'dead' list_head. But in 'perf sched lat' we were doing: machine__new() (via perf_session__new) process events, grabbing refcounts to keep those thread objects in 'perf sched' local data structures. machine__exit() (via perf_session__delete) which would delete the 'dead' list heads. And then doing the final thread__put() for the refcounts 'perf sched' rightfully obtained for keeping those thread object references. b00m, since thread__put() would do the list_del_init() touching a dead dead list head. Fix it by removing all the dead threads from machine->threads[].dead at machine__exit(), since whatever is there should have refcounts taken by things like 'perf sched lat', and make thread__put() check if the thread is in a linked list before removing it from that list. Reported-by: Wei Li <liwei391@huawei.com> Link: https://lkml.kernel.org/r/20190508143648.8153-1-liwei391@huawei.com Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zhipeng Xie <xiezhipeng1@huawei.com> Link: https://lkml.kernel.org/r/20190704194355.GI10740@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-06perf header: Assign proper ff->ph in perf_event__synthesize_features()Song Liu
bpf/btf write_* functions need ff->ph->env. With this missing, pipe-mode (perf record -o -) would crash like: Program terminated with signal SIGSEGV, Segmentation fault. This patch assign proper ph value to ff. Committer testing: (gdb) run record -o - Starting program: /root/bin/perf record -o - PERFILE2 <SNIP start of perf.data headers> Thread 1 "perf" received signal SIGSEGV, Segmentation fault. __do_write_buf (size=4, buf=0x160, ff=0x7fffffff8f80) at util/header.c:126 126 memcpy(ff->buf + ff->offset, buf, size); (gdb) bt #0 __do_write_buf (size=4, buf=0x160, ff=0x7fffffff8f80) at util/header.c:126 #1 do_write (ff=ff@entry=0x7fffffff8f80, buf=buf@entry=0x160, size=4) at util/header.c:137 #2 0x00000000004eddba in write_bpf_prog_info (ff=0x7fffffff8f80, evlist=<optimized out>) at util/header.c:912 #3 0x00000000004f69d7 in perf_event__synthesize_features (tool=tool@entry=0x97cc00 <record>, session=session@entry=0x7fffe9c6d010, evlist=0x7fffe9cae010, process=process@entry=0x4435d0 <process_synthesized_event>) at util/header.c:3695 #4 0x0000000000443c79 in record__synthesize (tail=tail@entry=false, rec=0x97cc00 <record>) at builtin-record.c:1214 #5 0x0000000000444ec9 in __cmd_record (rec=0x97cc00 <record>, argv=<optimized out>, argc=0) at builtin-record.c:1435 #6 cmd_record (argc=0, argv=<optimized out>) at builtin-record.c:2450 #7 0x00000000004ae3e9 in run_builtin (p=p@entry=0x98e058 <commands+216>, argc=argc@entry=3, argv=0x7fffffffd670) at perf.c:304 #8 0x000000000042eded in handle_internal_command (argv=<optimized out>, argc=<optimized out>) at perf.c:356 #9 run_argv (argcp=<optimized out>, argv=<optimized out>) at perf.c:400 #10 main (argc=3, argv=<optimized out>) at perf.c:522 (gdb) After the patch the SEGSEGV is gone. Reported-by: David Carrillo Cisneros <davidca@fb.com> Signed-off-by: Song Liu <songliubraving@fb.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: kernel-team@fb.com Cc: stable@vger.kernel.org # v5.1+ Fixes: 606f972b1361 ("perf bpf: Save bpf_prog_info information as headers to perf.data") Link: http://lkml.kernel.org/r/20190620010453.4118689-1-songliubraving@fb.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-06tools arch kvm: Sync kvm headers with the kernel sourcesArnaldo Carvalho de Melo
To pick up the changes from: 41040cf7c5f0 ("arm64/sve: Fix missing SVE/FPSIMD endianness conversions") 6ca00dfafda7 ("KVM: x86: Modify struct kvm_nested_state to have explicit fields for data") None entail changes in tooling. This silences these tools/perf build warnings: Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h' diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h' diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Dave Martin <Dave.Martin@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Liran Alon <liran.alon@oracle.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Link: https://lkml.kernel.org/n/tip-1cdbq5ulr4d6cx3iv2ye5wdv@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-06selftests/bpf: add test_tcp_rtt to .gitignoreStanislav Fomichev
Forgot to add it in the original patch. Fixes: b55873984dab ("selftests/bpf: test BPF_SOCK_OPS_RTT_CB") Reported-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-06selftests/bpf: fix test_align liveliness expectationsStanislav Fomichev
Commit 2589726d12a1 ("bpf: introduce bounded loops") caused a change in the way some registers liveliness is reported in the test_align. Add missing "_w" to a couple of tests. Note, there are no offset changes! Fixes: 2589726d12a1 ("bpf: introduce bounded loops") Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-05Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2019-07-05 1) Fix xfrm selector prefix length validation for inter address family tunneling. From Anirudh Gupta. 2) Fix a memleak in pfkey. From Jeremy Sowden. 3) Fix SA selector validation to allow empty selectors again. From Nicolas Dichtel. 4) Select crypto ciphers for xfrm_algo, this fixes some randconfig builds. From Arnd Bergmann. 5) Remove a duplicated assignment in xfrm_bydst_resize. From Cong Wang. 6) Fix a hlist corruption on hash rebuild. From Florian Westphal. 7) Fix a memory leak when creating xfrm interfaces. From Nicolas Dichtel. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05tools: bpftool: Fix json dump crash on powerpcJiri Olsa
Michael reported crash with by bpf program in json mode on powerpc: # bpftool prog -p dump jited id 14 [{ "name": "0xd00000000a9aa760", "insns": [{ "pc": "0x0", "operation": "nop", "operands": [null ] },{ "pc": "0x4", "operation": "nop", "operands": [null ] },{ "pc": "0x8", "operation": "mflr", Segmentation fault (core dumped) The code is assuming char pointers in format, which is not always true at least for powerpc. Fixing this by dumping the whole string into buffer based on its format. Please note that libopcodes code does not check return values from fprintf callback, but as per Jakub suggestion returning -1 on allocation failure so we do the best effort to propagate the error. Fixes: 107f041212c1 ("tools: bpftool: add JSON output for `bpftool prog dump jited *` command") Reported-by: Michael Petlan <mpetlan@redhat.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-05tools: bpftool: add "prog run" subcommand to test-run programsQuentin Monnet
Add a new "bpftool prog run" subcommand to run a loaded program on input data (and possibly with input context) passed by the user. Print output data (and output context if relevant) into a file or into the console. Print return value and duration for the test run into the console. A "repeat" argument can be passed to run the program several times in a row. The command does not perform any kind of verification based on program type (Is this program type allowed to use an input context?) or on data consistency (Can I work with empty input data?), this is left to the kernel. Example invocation: # perl -e 'print "\x0" x 14' | ./bpftool prog run \ pinned /sys/fs/bpf/sample_ret0 \ data_in - data_out - repeat 5 0000000 0000 0000 0000 0000 0000 0000 0000 | ........ ...... Return value: 0, duration (average): 260ns When one of data_in or ctx_in is "-", bpftool reads from standard input, in binary format. Other formats (JSON, hexdump) might be supported (via an optional command line keyword like "data_fmt_in") in the future if relevant, but this would require doing more parsing in bpftool. v2: - Fix argument names for function check_single_stdin(). (Yonghong) Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-05selftests/bpf: convert legacy BPF maps to BTF-defined onesAndrii Nakryiko
Convert selftests that were originally left out and new ones added recently to consistently use BTF-defined maps. Reported-by: kernel test robot <rong.a.chen@intel.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-05selftests/bpf: convert selftests using BTF-defined maps to new syntaxAndrii Nakryiko
Convert all the existing selftests that are already using BTF-defined maps to use new syntax (with no static data initialization). Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-05selftests/bpf: add __uint and __type macro for BTF-defined mapsAndrii Nakryiko
Add simple __uint and __type macro that hide details of how type and integer values are captured in BTF-defined maps. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-05libbpf: capture value in BTF type info for BTF-defined map defsAndrii Nakryiko
Change BTF-defined map definitions to capture compile-time integer values as part of BTF type definition, to avoid split of key/value type information and actual type/size/flags initialization for maps. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-05selftests/bpf: convert existing tracepoint tests to new APIsAndrii Nakryiko
Convert some existing tests that attach to tracepoints to use bpf_program__attach_tracepoint API instead. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Reviewed-by: Stanislav Fomichev <sdf@google.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-05selftests/bpf: add kprobe/uprobe selftestsAndrii Nakryiko
Add tests verifying kprobe/kretprobe/uprobe/uretprobe APIs work as expected. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Reviewed-by: Stanislav Fomichev <sdf@google.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-05selftests/bpf: switch test to new attach_perf_event APIAndrii Nakryiko
Use new bpf_program__attach_perf_event() in test previously relying on direct ioctl manipulations. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Reviewed-by: Stanislav Fomichev <sdf@google.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-05libbpf: add raw tracepoint attach APIAndrii Nakryiko
Add a wrapper utilizing bpf_link "infrastructure" to allow attaching BPF programs to raw tracepoints. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Reviewed-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-05libbpf: add tracepoint attach APIAndrii Nakryiko
Allow attaching BPF programs to kernel tracepoint BPF hooks specified by category and name. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Reviewed-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-05libbpf: add kprobe/uprobe attach APIAndrii Nakryiko
Add ability to attach to kernel and user probes and retprobes. Implementation depends on perf event support for kprobes/uprobes. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Reviewed-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-05libbpf: add ability to attach/detach BPF program to perf eventAndrii Nakryiko
bpf_program__attach_perf_event allows to attach BPF program to existing perf event hook, providing most generic and most low-level way to attach BPF programs. It returns struct bpf_link, which should be passed to bpf_link__destroy to detach and free resources, associated with a link. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Reviewed-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-05libbpf: introduce concept of bpf_linkAndrii Nakryiko
bpf_link is an abstraction of an association of a BPF program and one of many possible BPF attachment points (hooks). This allows to have uniform interface for detaching BPF programs regardless of the nature of link and how it was created. Details of creation and setting up of a specific bpf_link is handled by corresponding attachment methods (bpf_program__attach_xxx) added in subsequent commits. Once successfully created, bpf_link has to be eventually destroyed with bpf_link__destroy(), at which point BPF program is disassociated from a hook and all the relevant resources are freed. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Reviewed-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-05libbpf: make libbpf_strerror_r agnostic to sign of errorAndrii Nakryiko
It's often inconvenient to switch sign of error when passing it into libbpf_strerror_r. It's better for it to handle that automatically. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Reviewed-by: Stanislav Fomichev <sdf@google.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf-next 2019-07-03 The following pull-request contains BPF updates for your *net-next* tree. There is a minor merge conflict in mlx5 due to 8960b38932be ("linux/dim: Rename externally used net_dim members") which has been pulled into your tree in the meantime, but resolution seems not that bad ... getting current bpf-next out now before there's coming more on mlx5. ;) I'm Cc'ing Saeed just so he's aware of the resolution below: ** First conflict in drivers/net/ethernet/mellanox/mlx5/core/en_main.c: <<<<<<< HEAD static int mlx5e_open_cq(struct mlx5e_channel *c, struct dim_cq_moder moder, struct mlx5e_cq_param *param, struct mlx5e_cq *cq) ======= int mlx5e_open_cq(struct mlx5e_channel *c, struct net_dim_cq_moder moder, struct mlx5e_cq_param *param, struct mlx5e_cq *cq) >>>>>>> e5a3e259ef239f443951d401db10db7d426c9497 Resolution is to take the second chunk and rename net_dim_cq_moder into dim_cq_moder. Also the signature for mlx5e_open_cq() in ... drivers/net/ethernet/mellanox/mlx5/core/en.h +977 ... and in mlx5e_open_xsk() ... drivers/net/ethernet/mellanox/mlx5/core/en/xsk/setup.c +64 ... needs the same rename from net_dim_cq_moder into dim_cq_moder. ** Second conflict in drivers/net/ethernet/mellanox/mlx5/core/en_main.c: <<<<<<< HEAD int cpu = cpumask_first(mlx5_comp_irq_get_affinity_mask(priv->mdev, ix)); struct dim_cq_moder icocq_moder = {0, 0}; struct net_device *netdev = priv->netdev; struct mlx5e_channel *c; unsigned int irq; ======= struct net_dim_cq_moder icocq_moder = {0, 0}; >>>>>>> e5a3e259ef239f443951d401db10db7d426c9497 Take the second chunk and rename net_dim_cq_moder into dim_cq_moder as well. Let me know if you run into any issues. Anyway, the main changes are: 1) Long-awaited AF_XDP support for mlx5e driver, from Maxim. 2) Addition of two new per-cgroup BPF hooks for getsockopt and setsockopt along with a new sockopt program type which allows more fine-grained pass/reject settings for containers. Also add a sock_ops callback that can be selectively enabled on a per-socket basis and is executed for every RTT to help tracking TCP statistics, both features from Stanislav. 3) Follow-up fix from loops in precision tracking which was not propagating precision marks and as a result verifier assumed that some branches were not taken and therefore wrongly removed as dead code, from Alexei. 4) Fix BPF cgroup release synchronization race which could lead to a double-free if a leaf's cgroup_bpf object is released and a new BPF program is attached to the one of ancestor cgroups in parallel, from Roman. 5) Support for bulking XDP_TX on veth devices which improves performance in some cases by around 9%, from Toshiaki. 6) Allow for lookups into BPF devmap and improve feedback when calling into bpf_redirect_map() as lookup is now performed right away in the helper itself, from Toke. 7) Add support for fq's Earliest Departure Time to the Host Bandwidth Manager (HBM) sample BPF program, from Lawrence. 8) Various cleanups and minor fixes all over the place from many others. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-04bonding: add an option to specify a delay between peer notificationsVincent Bernat
Currently, gratuitous ARP/ND packets are sent every `miimon' milliseconds. This commit allows a user to specify a custom delay through a new option, `peer_notif_delay'. Like for `updelay' and `downdelay', this delay should be a multiple of `miimon' to avoid managing an additional work queue. The configuration logic is copied from `updelay' and `downdelay'. However, the default value cannot be set using a module parameter: Netlink or sysfs should be used to configure this feature. When setting `miimon' to 100 and `peer_notif_delay' to 500, we can observe the 500 ms delay is respected: 20:30:19.354693 ARP, Request who-has 203.0.113.10 tell 203.0.113.10, length 28 20:30:19.874892 ARP, Request who-has 203.0.113.10 tell 203.0.113.10, length 28 20:30:20.394919 ARP, Request who-has 203.0.113.10 tell 203.0.113.10, length 28 20:30:20.914963 ARP, Request who-has 203.0.113.10 tell 203.0.113.10, length 28 In bond_mii_monitor(), I have tried to keep the lock logic readable. The change is due to the fact we cannot rely on a notification to lower the value of `bond->send_peer_notif' as `NETDEV_NOTIFY_PEERS' is only triggered once every N times, while we need to decrement the counter each time. iproute2 also needs to be updated to be able to specify this new attribute through `ip link'. Signed-off-by: Vincent Bernat <vincent@bernat.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-04powerpc/pseries: Move mm/book3s64/vphn.c under platforms/pseries/Naveen N. Rao
hcall_vphn() is specific to pseries and will be used in a subsequent patch. So, move it to a more appropriate place under arch/powerpc/platforms/pseries. Also merge vphn.h into lppaca.h and update vphn selftest to use the new files. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-04Merge branch 'x86/cpu' into perf/core, to pick up revertIngo Molnar
perf/core has an earlier version of the x86/cpu tree merged, to avoid conflicts, and due to this we want to pick up this ABI impacting revert as well: 049331f277fe: ("x86/fsgsbase: Revert FSGSBASE support") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2019-07-03 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix the interpreter to properly handle BPF_ALU32 | BPF_ARSH on BE architectures, from Jiong. 2) Fix several bugs in the x32 BPF JIT for handling shifts by 0, from Luke and Xi. 3) Fix NULL pointer deref in btf_type_is_resolve_source_only(), from Stanislav. 4) Properly handle the check that forwarding is enabled on the device in bpf_ipv6_fib_lookup() helper code, from Anton. 5) Fix UAPI bpf_prog_info fields alignment for archs that have 16 bit alignment such as m68k, from Baruch. 6) Fix kernel hanging in unregister_netdevice loop while unregistering device bound to XDP socket, from Ilya. 7) Properly terminate tail update in xskq_produce_flush_desc(), from Nathan. 8) Fix broken always_inline handling in test_lwt_seg6local, from Jiri. 9) Fix bpftool to use correct argument in cgroup errors, from Jakub. 10) Fix detaching dummy prog in XDP redirect sample code, from Prashant. 11) Add Jonathan to AF_XDP reviewers, from Björn. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-07-16 18:00:39 +0000