| Age | Commit message (Collapse) | Author |
|---|
|
- functional fix for handling Confidence in Wacom driver (Jason Gerecke)
- power management fix for Wacom userspace battery exporting (Tatsunosuke Tobita)
Conflicts:
tools/testing/selftests/hid/tests/test_wacom_generic.py
|
|
- greatly improved coverage of Tablets in hid-selftests (Benjamin Tissoires)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount updates from Christian Brauner:
"This contains the work to retrieve detailed information about mounts
via two new system calls. This is hopefully the beginning of the end
of the saga that started with fsinfo() years ago.
The LWN articles in [1] and [2] can serve as a summary so we can avoid
rehashing everything here.
At LSFMM in May 2022 we got into a room and agreed on what we want to
do about fsinfo(). Basically, split it into pieces. This is the first
part of that agreement. Specifically, it is concerned with retrieving
information about mounts. So this only concerns the mount information
retrieval, not the mount table change notification, or the extended
filesystem specific mount option work. That is separate work.
Currently mounts have a 32bit id. Mount ids are already in heavy use
by libmount and other low-level userspace but they can't be relied
upon because they're recycled very quickly. We agreed that mounts
should carry a unique 64bit id by which they can be referenced
directly. This is now implemented as part of this work.
The new 64bit mount id is exposed in statx() through the new
STATX_MNT_ID_UNIQUE flag. If the flag isn't raised the old mount id is
returned. If it is raised and the kernel supports the new 64bit mount
id the flag is raised in the result mask and the new 64bit mount id is
returned. New and old mount ids do not overlap so they cannot be
conflated.
Two new system calls are introduced that operate on the 64bit mount
id: statmount() and listmount(). A summary of the api and usage can be
found on LWN as well (cf. [3]) but of course, I'll provide a summary
here as well.
Both system calls rely on struct mnt_id_req. Which is the request
struct used to pass the 64bit mount id identifying the mount to
operate on. It is extensible to allow for the addition of new
parameters and for future use in other apis that make use of mount
ids.
statmount() mimicks the semantics of statx() and exposes a set flags
that userspace may raise in mnt_id_req to request specific information
to be retrieved. A statmount() call returns a struct statmount filled
in with information about the requested mount. Supported requests are
indicated by raising the request flag passed in struct mnt_id_req in
the @mask argument in struct statmount.
Currently we do support:
- STATMOUNT_SB_BASIC:
Basic filesystem info
- STATMOUNT_MNT_BASIC
Mount information (mount id, parent mount id, mount attributes etc)
- STATMOUNT_PROPAGATE_FROM
Propagation from what mount in current namespace
- STATMOUNT_MNT_ROOT
Path of the root of the mount (e.g., mount --bind /bla /mnt returns /bla)
- STATMOUNT_MNT_POINT
Path of the mount point (e.g., mount --bind /bla /mnt returns /mnt)
- STATMOUNT_FS_TYPE
Name of the filesystem type as the magic number isn't enough due to submounts
The string options STATMOUNT_MNT_{ROOT,POINT} and STATMOUNT_FS_TYPE
are appended to the end of the struct. Userspace can use the offsets
in @fs_type, @mnt_root, and @mnt_point to reference those strings
easily.
The struct statmount reserves quite a bit of space currently for
future extensibility. This isn't really a problem and if this bothers
us we can just send a follow-up pull request during this cycle.
listmount() is given a 64bit mount id via mnt_id_req just as
statmount(). It takes a buffer and a size to return an array of the
64bit ids of the child mounts of the requested mount. Userspace can
thus choose to either retrieve child mounts for a mount in batches or
iterate through the child mounts. For most use-cases it will be
sufficient to just leave space for a few child mounts. But for big
mount tables having an iterator is really helpful. Iterating through a
mount table works by setting @param in mnt_id_req to the mount id of
the last child mount retrieved in the previous listmount() call"
Link: https://lwn.net/Articles/934469 [1]
Link: https://lwn.net/Articles/829212 [2]
Link: https://lwn.net/Articles/950569 [3]
* tag 'vfs-6.8.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
add selftest for statmount/listmount
fs: keep struct mnt_id_req extensible
wire up syscalls for statmount/listmount
add listmount(2) syscall
statmount: simplify string option retrieval
statmount: simplify numeric option retrieval
add statmount(2) syscall
namespace: extract show_path() helper
mounts: keep list of mounts in an rbtree
add unique mount ID
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual miscellaneous features, cleanups, and fixes
for vfs and individual fses.
Features:
- Add Jan Kara as VFS reviewer
- Show correct device and inode numbers in proc/<pid>/maps for vma
files on stacked filesystems. This is now easily doable thanks to
the backing file work from the last cycles. This comes with
selftests
Cleanups:
- Remove a redundant might_sleep() from wait_on_inode()
- Initialize pointer with NULL, not 0
- Clarify comment on access_override_creds()
- Rework and simplify eventfd_signal() and eventfd_signal_mask()
helpers
- Process aio completions in batches to avoid needless wakeups
- Completely decouple struct mnt_idmap from namespaces. We now only
keep the actual idmapping around and don't stash references to
namespaces
- Reformat maintainer entries to indicate that a given subsystem
belongs to fs/
- Simplify fput() for files that were never opened
- Get rid of various pointless file helpers
- Rename various file helpers
- Rename struct file members after SLAB_TYPESAFE_BY_RCU switch from
last cycle
- Make relatime_need_update() return bool
- Use GFP_KERNEL instead of GFP_USER when allocating superblocks
- Replace deprecated ida_simple_*() calls with their current ida_*()
counterparts
Fixes:
- Fix comments on user namespace id mapping helpers. They aren't
kernel doc comments so they shouldn't be using /**
- s/Retuns/Returns/g in various places
- Add missing parameter documentation on can_move_mount_beneath()
- Rename i_mapping->private_data to i_mapping->i_private_data
- Fix a false-positive lockdep warning in pipe_write() for watch
queues
- Improve __fget_files_rcu() code generation to improve performance
- Only notify writer that pipe resizing has finished after setting
pipe->max_usage otherwise writers are never notified that the pipe
has been resized and hang
- Fix some kernel docs in hfsplus
- s/passs/pass/g in various places
- Fix kernel docs in ntfs
- Fix kcalloc() arguments order reported by gcc 14
- Fix uninitialized value in reiserfs"
* tag 'vfs-6.8.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (36 commits)
reiserfs: fix uninit-value in comp_keys
watch_queue: fix kcalloc() arguments order
ntfs: dir.c: fix kernel-doc function parameter warnings
fs: fix doc comment typo fs tree wide
selftests/overlayfs: verify device and inode numbers in /proc/pid/maps
fs/proc: show correct device and inode numbers in /proc/pid/maps
eventfd: Remove usage of the deprecated ida_simple_xx() API
fs: super: use GFP_KERNEL instead of GFP_USER for super block allocation
fs/hfsplus: wrapper.c: fix kernel-doc warnings
fs: add Jan Kara as reviewer
fs/inode: Make relatime_need_update return bool
pipe: wakeup wr_wait after setting max_usage
file: remove __receive_fd()
file: stop exposing receive_fd_user()
fs: replace f_rcuhead with f_task_work
file: remove pointless wrapper
file: s/close_fd_get_file()/file_close_fd()/g
Improve __fget_files_rcu() code generation (and thus __fget_light())
file: massage cleanup of files that failed to open
fs/pipe: Fix lockdep false-positive in watchqueue pipe_write()
...
|
|
KVM x86 Hyper-V changes for 6.8:
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV "emulation"
at build time.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 6.8
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB
base granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with
a prefix branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV
support to that version of the architecture.
- A small set of vgic fixes and associated cleanups.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.8
This is a relatively quiet release, there's a lot of driver specific
changes and the usual high level of activity in the SOF core but the
one big core change was Mormioto-san's work to support more N:M
CPU:CODEC mapping cases. Highlights include:
- Enhanced support for N:M CPU:CODEC mappings in the core and in
audio-graph-card2.
- Support for falling back to older SOF IPC versions where firmware for
new versions is not available.
- Support for notification of control changes generated by SOF firmware
with IPC4.
- Device tree support for describing parts of the card which can be
active over suspend (for very low power playback or wake word use
cases).
- ACPI parsing support for the ES83xx driver, reducing the number of
quirks neede for x86 systems.
- Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm
SM8250, SM8550, SM8650 and X1E80100.
- Removal of Freescale MPC8610 support, the SoC is no longer supported
by Linux.
|
|
Commit ba24ea129126 ("net/sched: Retire ipt action") removed the ipt action
but not the testcases. This patch removes the outstanding tdc tests.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The expression "source ../lib.sh" added to net/forwarding/lib.sh in commit
25ae948b4478 ("selftests/net: add lib.sh") does not work for tests outside
net/forwarding which source net/forwarding/lib.sh (1). It also does not
work in some cases where only a subset of tests are exported (2).
Avoid the problems mentioned above by replacing the faulty expression with
a copy of the content from net/lib.sh which is used by files under
net/forwarding.
A more thorough solution which avoids duplicating content between
net/lib.sh and net/forwarding/lib.sh has been posted here:
https://lore.kernel.org/netdev/20231222135836.992841-1-bpoirier@nvidia.com/
The approach in the current patch is a stopgap solution to avoid submitting
large changes at the eleventh hour of this development cycle.
Example of problem 1)
tools/testing/selftests/drivers/net/bonding$ ./dev_addr_lists.sh
./net_forwarding_lib.sh: line 41: ../lib.sh: No such file or directory
TEST: bonding cleanup mode active-backup [ OK ]
TEST: bonding cleanup mode 802.3ad [ OK ]
TEST: bonding LACPDU multicast address to slave (from bond down) [ OK ]
TEST: bonding LACPDU multicast address to slave (from bond up) [ OK ]
An error message is printed but since the test does not use functions from
net/lib.sh, the test results are not affected.
Example of problem 2)
tools/testing/selftests$ make install TARGETS="net/forwarding"
tools/testing/selftests$ cd kselftest_install/net/forwarding/
tools/testing/selftests/kselftest_install/net/forwarding$ ./pedit_ip.sh veth{0..3}
lib.sh: line 41: ../lib.sh: No such file or directory
TEST: ping [ OK ]
TEST: ping6 [ OK ]
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth1 ingress pedit ip src set 198.51.100.1 [FAIL]
Expected to get 10 packets, but got .
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth2 egress pedit ip src set 198.51.100.1 [FAIL]
Expected to get 10 packets, but got .
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth1 ingress pedit ip dst set 198.51.100.1 [FAIL]
Expected to get 10 packets, but got .
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth2 egress pedit ip dst set 198.51.100.1 [FAIL]
Expected to get 10 packets, but got .
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth1 ingress pedit ip6 src set 2001:db8:2::1 [FAIL]
Expected to get 10 packets, but got .
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth2 egress pedit ip6 src set 2001:db8:2::1 [FAIL]
Expected to get 10 packets, but got .
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth1 ingress pedit ip6 dst set 2001:db8:2::1 [FAIL]
Expected to get 10 packets, but got .
./pedit_ip.sh: line 135: busywait: command not found
TEST: dev veth2 egress pedit ip6 dst set 2001:db8:2::1 [FAIL]
Expected to get 10 packets, but got .
In this case, the test results are affected.
Fixes: 25ae948b4478 ("selftests/net: add lib.sh")
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Suggested-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240104141109.100672-1-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-01-05
We've added 40 non-merge commits during the last 2 day(s) which contain
a total of 73 files changed, 1526 insertions(+), 951 deletions(-).
The main changes are:
1) Fix a memory leak when streaming AF_UNIX sockets were inserted
into multiple sockmap slots/maps, from John Fastabend.
2) Fix gotol in s390 BPF JIT with large offsets, from Ilya Leoshkevich.
3) Fix reattachment branch in bpf_tracing_prog_attach() and reject
the request if there is no valid attach_btf, from Jiri Olsa.
4) Remove deprecated bpfilter kernel leftovers given the project
is developed in user space (https://github.com/facebook/bpfilter),
from Quentin Deslandes.
5) Relax tracing BPF program recursive attach rules given right now
it is not possible to create tracing program call cycles,
from Dmitrii Dolgov.
6) Fix excessive memory consumption for the bpf_global_percpu_ma
for systems with a large number of CPUs, from Yonghong Song.
7) Small x86 BPF JIT cleanup to reuse emit_nops instead of open-coding
memcpy of x86_nops, from Leon Hwang.
8) Follow-up for libbpf to support __arg_ctx global function argument tag
semantics to complement the merged kernel side, from Andrii Nakryiko.
9) Introduce "volatile compare" macros for BPF selftests in order
to make the latter more robust against compiler optimization,
from Alexei Starovoitov.
10) Small simplification in verifier's size checking of helper accesses
along with additional selftests, from Andrei Matei.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (40 commits)
selftests/bpf: Test re-attachment fix for bpf_tracing_prog_attach
bpf: Fix re-attachment branch in bpf_tracing_prog_attach
selftests/bpf: Add test for recursive attachment of tracing progs
bpf: Relax tracing prog recursive attach rules
bpf, x86: Use emit_nops to replace memcpy x86_nops
selftests/bpf: Test gotol with large offsets
selftests/bpf: Double the size of test_loader log
s390/bpf: Fix gotol with large offsets
bpfilter: remove bpfilter
bpf: Remove unnecessary cpu == 0 check in memalloc
selftests/bpf: add __arg_ctx BTF rewrite test
selftests/bpf: add arg:ctx cases to test_global_funcs tests
libbpf: implement __arg_ctx fallback logic
libbpf: move BTF loading step after relocation step
libbpf: move exception callbacks assignment logic into relocation step
libbpf: use stable map placeholder FDs
libbpf: don't rely on map->fd as an indicator of map being created
libbpf: use explicit map reuse flag to skip map creation steps
libbpf: make uniform use of btf__fd() accessor inside libbpf
selftests/bpf: Add a selftest with > 512-byte percpu allocation size
...
====================
Link: https://lore.kernel.org/r/20240105170105.21070-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pick up some miscellaneous fixups for v6.8.
|
|
Add a test for UFFDIO_MOVE ioctl operating on a hugepage which has to be
split because destination is marked with MADV_NOHUGEPAGE. With this we
cover all 3 cases: normal page move, hugepage move, hugepage splitting
before move.
Link: https://lkml.kernel.org/r/20231230025636.2477429-1-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Nicolas Geoffray <ngeoffray@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The test depends on writing to nr_hugepages which isn't possible without
root privileges. So skip the test in this case.
Link: https://lkml.kernel.org/r/20240101083614.1076768-2-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Link: https://lkml.kernel.org/r/20240101083614.1076768-1-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Link: https://lkml.kernel.org/r/20240102053223.2099572-1-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Link: https://lkml.kernel.org/r/20240102053807.2114200-1-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Link: https://lkml.kernel.org/r/20240102081919.2325570-1-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently there is no test which checks that IPv6 extension header packets
successfully coalesce. This commit adds a test, which verifies two IPv6
packets with HBH extension headers do coalesce, and another test which
checks that packets with different extension header data do not coalesce
in GRO.
I changed the receive socket filter to accept a packet with one extension
header. This change exposed a bug in the fragment test -- the old BPF did
not accept the fragment packet. I updated correct_num_packets in the
fragment test accordingly.
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/69282fed-2415-47e8-b3d3-34939ec3eb56@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a test case to verify the fix for "prog->aux->dst_trampoline and
tgt_prog is NULL" branch in bpf_tracing_prog_attach. The sequence of
events:
1. load rawtp program
2. load fentry program with rawtp as target_fd
3. create tracing link for fentry program with target_fd = 0
4. repeat 3
Acked-by: Jiri Olsa <olsajiri@gmail.com>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Link: https://lore.kernel.org/r/20240103190559.14750-5-9erthalion6@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Verify the fact that only one fentry prog could be attached to another
fentry, building up an attachment chain of limited size. Use existing
bpf_testmod as a start of the chain.
Acked-by: Jiri Olsa <olsajiri@gmail.com>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Link: https://lore.kernel.org/r/20240103190559.14750-3-9erthalion6@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
e009b2efb7a8 ("bnxt_en: Remove mis-applied code from bnxt_cfg_ntp_filters()")
0f2b21477988 ("bnxt_en: Fix compile error without CONFIG_RFS_ACCEL")
https://lore.kernel.org/all/20240105115509.225aa8a2@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless and netfilter.
We haven't accumulated much over the break. If it wasn't for the
uninterrupted stream of fixes for Intel drivers this PR would be very
slim. There was a handful of user reports, however, either they stood
out because of the lower traffic or users have had more time to test
over the break. The ones which are v6.7-relevant should be wrapped up.
Current release - regressions:
- Revert "net: ipv6/addrconf: clamp preferred_lft to the minimum
required", it caused issues on networks where routers send prefixes
with preferred_lft=0
- wifi:
- iwlwifi: pcie: don't synchronize IRQs from IRQ, prevent deadlock
- mac80211: fix re-adding debugfs entries during reconfiguration
Current release - new code bugs:
- tcp: print AO/MD5 messages only if there are any keys
Previous releases - regressions:
- virtio_net: fix missing dma unmap for resize, prevent OOM
Previous releases - always broken:
- mptcp: prevent tcp diag from closing listener subflows
- nf_tables:
- set transport header offset for egress hook, fix IPv4 mangling
- skip set commit for deleted/destroyed sets, avoid double deactivation
- nat: make sure action is set for all ct states, fix openvswitch
matching on ICMP packets in related state
- eth: mlxbf_gige: fix receive hang under heavy traffic
- eth: r8169: fix PCI error on system resume for RTL8168FP
- net: add missing getsockopt(SO_TIMESTAMPING_NEW) and cmsg handling"
* tag 'net-6.7-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (52 commits)
net/tcp: Only produce AO/MD5 logs if there are any keys
net: Implement missing SO_TIMESTAMPING_NEW cmsg support
bnxt_en: Remove mis-applied code from bnxt_cfg_ntp_filters()
net: ravb: Wait for operating mode to be applied
asix: Add check for usbnet_get_endpoints
octeontx2-af: Re-enable MAC TX in otx2_stop processing
octeontx2-af: Always configure NIX TX link credits based on max frame size
net/smc: fix invalid link access in dumping SMC-R connections
net/qla3xxx: fix potential memleak in ql_alloc_buffer_queues
virtio_net: fix missing dma unmap for resize
igc: Fix hicredit calculation
ice: fix Get link status data length
i40e: Restore VF MSI-X state during PCI reset
i40e: fix use-after-free in i40e_aqc_add_filters()
net: Save and restore msg_namelen in sock_sendmsg
netfilter: nft_immediate: drop chain reference counter on error
netfilter: nf_nat: fix action not being set for all ct states
net: bcmgenet: Fix FCS generation for fragmented skbuffs
mptcp: prevent tcp diag from closing listener subflows
MAINTAINERS: add Geliang as reviewer for MPTCP
...
|
|
Test gotol with offsets that don't fit into a short (i.e., larger than
32k or smaller than -32k).
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20240102193531.3169422-4-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Testing long jumps requires having >32k instructions. That many
instructions require the verifier log buffer of 2 megabytes.
The regular test_progs run doesn't need an increased buffer, since
gotol test with 40k instructions doesn't request a log,
but test_progs -v will set the verifier log level.
Hence to avoid breaking gotol test with -v increase the buffer size.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20240102193531.3169422-3-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
perf test 17 'Setup struct perf_event_attr' fails on s390 z/VM guest,
using linux-next kernel.
Root cause is the fall-back from hardware counter cycles
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
size 136
config 0 (PERF_COUNT_HW_CPU_CYCLES)
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|ADDR|PERIOD|DATA_SRC
read_format ID|LOST
which returns -ENOENT on s390 z/VM guest. This causes the code to fall
back to software counter task-clock, as can be seen in the debug output:
------------------------------------------------------------
perf_event_attr:
type 1 (PERF_TYPE_SOFTWARE)
size 136
config 0x1 (PERF_COUNT_SW_TASK_CLOCK) <-here
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|ADDR|PERIOD|DATA_SRC
read_format ID|LOST
This succeeds on s390 z/VM guest.
This successful installation of the counter task-clock is not listed in
the expected results and the test case fails.
This is caused by commit eb2eac0c7b618033 ("perf evsel: Fallback to
"task-clock" when not system wide") which introduced fall back from
event 'cycles' to event 'task-clock'.
To fix this on s390 allow event number 0 (cycles) and event number 1
(task-clock) as expected result.
Output before:
# ./perf test -Fv 17
17: Setup struct perf_event_attr :
--- start ---
running './tests/attr/test-stat-group1'
unsupp './tests/attr/test-stat-group1'
running './tests/attr/test-record-graph-default'
test limitation '!aarch64'
excluded architecture list ['aarch64']
expected config=0, got 1
FAILED './tests/attr/test-record-graph-default' - match failure
---- end ----
Setup struct perf_event_attr: FAILED!
#
Output after:
# ./perf test -F 17
17: Setup struct perf_event_attr : Ok
#
Fixes: eb2eac0c7b618033 ("perf evsel: Fallback to "task-clock" when not system wide")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20231219143235.1075522-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The addr_location map and maps fields in the inner loop were missing
calls to map__get()/maps__get(). The subsequent addr_location__exit()
call in each loop puts the map/maps fields causing use-after-free
aborts.
This issue reproduces on at least arm64 and x86_64 with something
simple like `perf record -g ls` followed by `perf script -s script.py`
with the following script:
perf_db_export_mode = True
perf_db_export_calls = False
perf_db_export_callchains = True
def sample_table(*args):
print(f'sample_table({args})')
def call_path_table(*args):
print(f'call_path_table({args}')
Committer testing:
This test, just introduced by Ian Rogers, now passes, not segfaulting
anymore:
# perf test "perf script tests"
95: perf script tests : Ok
#
Fixes: 0dd5041c9a0eaf8c ("perf addr_location: Add init/exit/copy functions")
Signed-off-by: Ben Gainey <ben.gainey@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231207140911.3240408-1-ben.gainey@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Start a new set of shell tests for testing perf script. The initial
contribution is checking that some perf db-export functionality works
as reported in this regression by Ben Gainey <ben.gainey@arm.com>:
https://lore.kernel.org/lkml/20231207140911.3240408-1-ben.gainey@arm.com/
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ben Gainey <ben.gainey@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231207174057.1482161-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
uniq() will write one command name over another causing the overwritten
string to be leaked. Fix by doing a pass that removes duplicates and a
second that removes the holes.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chenyuan Mi <cymi20@fudan.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231208000515.1693746-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In its infinite wisdom, by default, SLang sets susp undef, and this can
only be un-done by calling SLtty_set_suspend_state(true). After every
SLang_init_tty().
Additionally, no provisions are made for maintaining the teletype
attributes across suspend/continue (outside of curses emulation
mode(?!), which provides full support, naturally), so we need to save
and restore the flags ourselves, as well as reset the text colours when
going under. We need to also re-draw the screen, and raising SIGWINCH,
shockingly, Just Works.
The correct solution would be to Not Use SLang, but as a stop-gap,
this makes TUI 'perf report' usable.
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: yaowenbin <yaowenbin1@huawei.com>
Link: https://lore.kernel.org/r/0354dcae23a8713f75f4fed609e0caec3c6e3cd5.1672174189.git.nabijaczleweli@nabijaczleweli.xyz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Update to v1.17 released in:
https://github.com/intel/perfmon/pull/123
Add events FP_ARITH_DISPATCHED.V0, FP_ARITH_DISPATCHED.V1,
FP_ARITH_DISPATCHED.V2, UNC_IIO_IOMMU0.1G_HITS, UNC_IIO_IOMMU0.2M_HITS
and UNC_IIO_IOMMU0.4K_HITS. Description updates.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240104074259.653219-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Update to v1.23 released in:
https://github.com/intel/perfmon/pull/123
Updates to event descriptions.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240104074259.653219-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Update to v1.02 released in:
https://github.com/intel/perfmon/pull/123
Removes events AMX_OPS_RETIRED.BF16 and AMX_OPS_RETIRED.INT8. Add
events FP_ARITH_DISPATCHED.V0, FP_ARITH_DISPATCHED.V1,
FP_ARITH_DISPATCHED.V2, UNC_IIO_IOMMU0.1G_HITS, UNC_IIO_IOMMU0.2M_HITS
and UNC_IIO_IOMMU0.4K_HITS. Description updates.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240104074259.653219-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Fix that the core PMU is being specified for 2 uncore events. Specify
a PMU for the alderlake UNCORE_FREQ metric.
Conversion script updated in:
https://github.com/intel/perfmon/pull/126
Committer testing:
Before this patch the "perf all metricgroups test" was failing, now:
root@number:~# perf test metric
10: PMU events :
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
10.5: Parsing of metric thresholds with fake PMUs : Ok
61: Parse and process metrics : Ok
98: perf stat metrics (shadow stat) test : Skip
101: perf all metricgroups test : Ok
102: perf all metrics test : FAILED!
107: perf metrics value validation : Ok
root@number:~#
Test 102 is failing for another reason, not being able to get as many
counters as needed, Ian Rogers suggested disabling the NMI watchdog to
have more counters available:
root@number:/home/acme# cat /proc/sys/kernel/nmi_watchdog
1
root@number:/home/acme# echo 0 > /proc/sys/kernel/nmi_watchdog
root@number:/home/acme# perf test 102
102: perf all metrics test : Ok
root@number:/home/acme#
Closes: https://lore.kernel.org/lkml/ZZWOdHXJJ_oecWwm@kernel.org/
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240104074259.653219-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
bpfilter was supposed to convert iptables filtering rules into
BPF programs on the fly, from the kernel, through a usermode
helper. The base code for the UMH was introduced in 2018, and
couple of attempts (2, 3) tried to introduce the BPF program
generate features but were abandoned.
bpfilter now sits in a kernel tree unused and unusable, occasionally
causing confusion amongst Linux users (4, 5).
As bpfilter is now developed in a dedicated repository on GitHub (6),
it was suggested a couple of times this year (LSFMM/BPF 2023,
LPC 2023) to remove the deprecated kernel part of the project. This
is the purpose of this patch.
[1]: https://lore.kernel.org/lkml/20180522022230.2492505-1-ast@kernel.org/
[2]: https://lore.kernel.org/bpf/20210829183608.2297877-1-me@ubique.spb.ru/#t
[3]: https://lore.kernel.org/lkml/20221224000402.476079-1-qde@naccy.de/
[4]: https://dxuuu.xyz/bpfilter.html
[5]: https://github.com/linuxkit/linuxkit/pull/3904
[6]: https://github.com/facebook/bpfilter
Signed-off-by: Quentin Deslandes <qde@naccy.de>
Link: https://lore.kernel.org/r/20231226130745.465988-1-qde@naccy.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
* for-next/selftests:
kselftest/arm64: Don't probe the current VL for unsupported vector types
kselftest/arm64: Log SVCR when the SME tests barf
kselftest/arm64: Improve output for skipped TPIDR2 ABI test
|
|
Add a test validating that libbpf uploads BTF and func_info with
rewritten type information for arguments of global subprogs that are
marked with __arg_ctx tag.
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240104013847.3875810-10-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a few extra cases of global funcs with context arguments. This time
rely on "arg:ctx" decl_tag (__arg_ctx macro), but put it next to
"classic" cases where context argument has to be of an exact type that
BPF verifier expects (e.g., bpf_user_pt_regs_t for kprobe/uprobe).
Colocating all these cases separately from other global func args that
rely on arg:xxx decl tags (in verifier_global_subprogs.c) allows for
simpler backwards compatibility testing on old kernels. All the cases in
test_global_func_ctx_args.c are supposed to work on older kernels, which
was manually validated during development.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240104013847.3875810-9-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Out of all special global func arg tag annotations, __arg_ctx is
practically is the most immediately useful and most critical to have
working across multitude kernel version, if possible. This would allow
end users to write much simpler code if __arg_ctx semantics worked for
older kernels that don't natively understand btf_decl_tag("arg:ctx") in
verifier logic.
Luckily, it is possible to ensure __arg_ctx works on old kernels through
a bit of extra work done by libbpf, at least in a lot of common cases.
To explain the overall idea, we need to go back at how context argument
was supported in global funcs before __arg_ctx support was added. This
was done based on special struct name checks in kernel. E.g., for
BPF_PROG_TYPE_PERF_EVENT the expectation is that argument type `struct
bpf_perf_event_data *` mark that argument as PTR_TO_CTX. This is all
good as long as global function is used from the same BPF program types
only, which is often not the case. If the same subprog has to be called
from, say, kprobe and perf_event program types, there is no single
definition that would satisfy BPF verifier. Subprog will have context
argument either for kprobe (if using bpf_user_pt_regs_t struct name) or
perf_event (with bpf_perf_event_data struct name), but not both.
This limitation was the reason to add btf_decl_tag("arg:ctx"), making
the actual argument type not important, so that user can just define
"generic" signature:
__noinline int global_subprog(void *ctx __arg_ctx) { ... }
I won't belabor how libbpf is implementing subprograms, see a huge
comment next to bpf_object_relocate_calls() function. The idea is that
each main/entry BPF program gets its own copy of global_subprog's code
appended.
This per-program copy of global subprog code *and* associated func_info
.BTF.ext information, pointing to FUNC -> FUNC_PROTO BTF type chain
allows libbpf to simulate __arg_ctx behavior transparently, even if the
kernel doesn't yet support __arg_ctx annotation natively.
The idea is straightforward: each time we append global subprog's code
and func_info information, we adjust its FUNC -> FUNC_PROTO type
information, if necessary (that is, libbpf can detect the presence of
btf_decl_tag("arg:ctx") just like BPF verifier would do it).
The rest is just mechanical and somewhat painful BTF manipulation code.
It's painful because we need to clone FUNC -> FUNC_PROTO, instead of
reusing it, as same FUNC -> FUNC_PROTO chain might be used by another
main BPF program within the same BPF object, so we can't just modify it
in-place (and cloning BTF types within the same struct btf object is
painful due to constant memory invalidation, see comments in code).
Uploaded BPF object's BTF information has to work for all BPF
programs at the same time.
Once we have FUNC -> FUNC_PROTO clones, we make sure that instead of
using some `void *ctx` parameter definition, we have an expected `struct
bpf_perf_event_data *ctx` definition (as far as BPF verifier and kernel
is concerned), which will mark it as context for BPF verifier. Same
global subprog relocated and copied into another main BPF program will
get different type information according to main program's type. It all
works out in the end in a completely transparent way for end user.
Libbpf maintains internal program type -> expected context struct name
mapping internally. Note, not all BPF program types have named context
struct, so this approach won't work for such programs (just like it
didn't before __arg_ctx). So native __arg_ctx is still important to have
in kernel to have generic context support across all BPF program types.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240104013847.3875810-8-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
With all the preparations in previous patches done we are ready to
postpone BTF loading and sanitization step until after all the
relocations are performed.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240104013847.3875810-7-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Move the logic of finding and assigning exception callback indices from
BTF sanitization step to program relocations step, which seems more
logical and will unblock moving BTF loading to after relocation step.
Exception callbacks discovery and assignment has no dependency on BTF
being loaded into the kernel, it only uses BTF information. It does need
to happen before subprogram relocations happen, though. Which is why the
split.
No functional changes.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240104013847.3875810-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Move map creation to later during BPF object loading by pre-creating
stable placeholder FDs (utilizing memfd_create()). Use dup2()
syscall to then atomically make those placeholder FDs point to real
kernel BPF map objects.
This change allows to delay BPF map creation to after all the BPF
program relocations. That, in turn, allows to delay BTF finalization and
loading into kernel to after all the relocations as well. We'll take
advantage of the latter in subsequent patches to allow libbpf to adjust
BTF in a way that helps with BPF global function usage.
Clean up a few places where we close map->fd, which now shouldn't
happen, because map->fd should be a valid FD regardless of whether map
was created or not. Surprisingly and nicely it simplifies a bunch of
error handling code. If this change doesn't backfire, I'm tempted to
pre-create such stable FDs for other entities (progs, maybe even BTF).
We previously did some manipulations to make gen_loader work with fake
map FDs, with stable map FDs this hack is not necessary for maps (we
still have it for BTF, but I left it as is for now).
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240104013847.3875810-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
With the upcoming switch to preallocated placeholder FDs for maps,
switch various getters/setter away from checking map->fd. Use
map_is_created() helper that detect whether BPF map can be modified based
on map->obj->loaded state, with special provision for maps set up with
bpf_map__reuse_fd().
For backwards compatibility, we take map_is_created() into account in
bpf_map__fd() getter as well. This way before bpf_object__load() phase
bpf_map__fd() will always return -1, just as before the changes in
subsequent patches adding stable map->fd placeholders.
We also get rid of all internal uses of bpf_map__fd() getter, as it's
more oriented for uses external to libbpf. The above map_is_created()
check actually interferes with some of the internal uses, if map FD is
fetched through bpf_map__fd().
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240104013847.3875810-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Instead of inferring whether map already point to previously
created/pinned BPF map (which user can specify with bpf_map__reuse_fd()) API),
use explicit map->reused flag that is set in such case.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240104013847.3875810-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
It makes future grepping and code analysis a bit easier.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240104013847.3875810-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a selftest to capture the verification failure when the allocation
size is greater than 512.
Acked-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231222031812.1293190-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In the previous patch, the maximum data size for bpf_global_percpu_ma
is 512 bytes. This breaks selftest test_bpf_ma. The test is adjusted
in two aspects:
- Since the maximum allowed data size for bpf_global_percpu_ma is
512, remove all tests beyond that, names sizes 1024, 2048 and 4096.
- Previously the percpu data size is bucket_size - 8 in order to
avoid percpu allocation into the next bucket. This patch removed
such data size adjustment thanks to Patch 1.
Also, a better way to generate BTF type is used than adding
a member to the value struct.
Acked-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231222031807.1292853-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The patch set [1] added a general lib.sh in net selftests, and converted
several test scripts to source the lib.sh.
unicast_extensions.sh (converted in [1]) and pmtu.sh (converted in [2])
have a /bin/sh shebang which may point to various shells in different
distributions, but "source" is only available in some of them. For
example, "source" is a built-it function in bash, but it cannot be
used in dash.
Refer to other scripts that were converted together, simply change the
shebang to bash to fix the following issues when the default /bin/sh
points to other shells.
not ok 51 selftests: net: unicast_extensions.sh # exit=1
v1 -> v2:
- Fix pmtu.sh which has the same issue as unicast_extensions.sh,
suggested by Hangbin
- Change the style of the "source" line to be consistent with other
tests, suggested by Hangbin
Link: https://lore.kernel.org/all/20231202020110.362433-1-liuhangbin@gmail.com/ [1]
Link: https://lore.kernel.org/all/20231219094856.1740079-1-liuhangbin@gmail.com/ [2]
Reported-by: kernel test robot <oliver.sang@intel.com>
Fixes: 378f082eaf37 ("selftests/net: convert pmtu.sh to run it in unique namespace")
Fixes: 0f4765d0b48d ("selftests/net: convert unicast_extensions.sh to run it in unique namespace")
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20231229131931.3961150-1-yujie.liu@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add test that replaces the same socket with itself. This exercises a
corner case where old element and new element have the same posck.
Test protocols: TCP, UDP, stream af_unix and dgram af_unix.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20231221232327.43678-6-john.fastabend@gmail.com
|
|
Add test with multiple maps where each socket is inserted in multiple
maps. Test protocols: TCP, UDP, stream af_unix and dgram af_unix.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20231221232327.43678-5-john.fastabend@gmail.com
|
|
Add test with a single map where each socket is inserted multiple
times. Test protocols: TCP, UDP, stream af_unix and dgram af_unix.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20231221232327.43678-4-john.fastabend@gmail.com
|
