From c3805467aad7ce4e31c2b935046843de08cfc026 Mon Sep 17 00:00:00 2001 From: Balaji T K Date: Thu, 8 Sep 2011 22:08:39 +0530 Subject: mmc: core: Put eMMC in Sleep mode before suspend Put MMC to sleep if it supports SLEEP/AWAKE (CMD5) in the mmc suspend so that Vcc (NAND core) can be cut to minimize power consumption. eMMC put into SLEEP can respond to CMD0 or H/W reset or CMD5. Current implemention on resume from suspend relies on CMD0 in mmc_init_card to get out of SLEEP mode. Signed-off-by: Balaji T K Acked-by: Venkatraman S Reviewed-by: Subhash Jadavani Acked-by: Adrian Hunter Signed-off-by: Chris Ball --- drivers/mmc/core/mmc.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers/mmc/core/mmc.c') diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 5700b1cbdfec..f73fceea5dbd 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -553,6 +553,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, * need to tell some cards to go back to the idle * state. We wait 1ms to give cards time to * respond. + * mmc_go_idle is needed for eMMC that are asleep */ mmc_go_idle(host); @@ -900,16 +901,20 @@ static void mmc_detect(struct mmc_host *host) */ static int mmc_suspend(struct mmc_host *host) { + int err = 0; + BUG_ON(!host); BUG_ON(!host->card); mmc_claim_host(host); - if (!mmc_host_is_spi(host)) + if (mmc_card_can_sleep(host)) + err = mmc_card_sleep(host); + else if (!mmc_host_is_spi(host)) mmc_deselect_cards(host); host->card->state &= ~MMC_STATE_HIGHSPEED; mmc_release_host(host); - return 0; + return err; } /* -- cgit From 7f7e4129c23f0419257184dff6fec89d2d5a8964 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Wed, 21 Sep 2011 14:08:13 -0400 Subject: mmc: core: Fix hangs related to insert/remove of cards During a rescan operation mmc_attach(sd|mmc|sdio) functions are called. The error handling in these function can trigger a detach of the bus, which also meant a power off. This is not notified by the rescan operation which then continues to the next attach function. If a power off has been done, the framework must never send any new commands to the host driver, without first doing a new power up. This will most likely trigger any host driver to hang. Moving power off out of detach and instead handle power off separately when it is actually needed, solves the issue. Signed-off-by: Ulf Hansson Acked-by: Linus Walleij Cc: Signed-off-by: Chris Ball --- drivers/mmc/core/mmc.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/mmc/core/mmc.c') diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index f73fceea5dbd..3b7c069a4ea6 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -892,6 +892,7 @@ static void mmc_detect(struct mmc_host *host) mmc_claim_host(host); mmc_detach_bus(host); + mmc_power_off(host); mmc_release_host(host); } } -- cgit From 44669034815a7ad263542ac605c581a10b22d146 Mon Sep 17 00:00:00 2001 From: Stefan Nilsson XK Date: Thu, 15 Sep 2011 17:50:38 +0200 Subject: mmc: core: Set correct bus mode before card init Earlier all cards where initiated with bus mode set as OPENDRAIN, and then later switched to PUSHPULL. According to the MMC/SD/SDIO specifications only MMC cards use OPENDRAIN during init. For both SD and SDIO the bus mode shall be PUSHPULL before attempting to init the card. The consequence of having incorrect bus mode can lead to not being able to detect the card. Therefore the default behavior have now been changed to PUSHPULL in mmc_power_up, and will only be temporarily switched when trying to attach or init a MMC card. Signed-off-by: Stefan Nilsson XK Signed-off-by: Ulf HANSSON Acked-by: Linus Walleij Signed-off-by: Chris Ball --- drivers/mmc/core/mmc.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers/mmc/core/mmc.c') diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 3b7c069a4ea6..b74e6f14b3ac 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -548,6 +548,10 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, BUG_ON(!host); WARN_ON(!host->claimed); + /* Set correct bus mode for MMC before attempting init */ + if (!mmc_host_is_spi(host)) + mmc_set_bus_mode(host, MMC_BUSMODE_OPENDRAIN); + /* * Since we're changing the OCR value, we seem to * need to tell some cards to go back to the idle @@ -1022,6 +1026,10 @@ int mmc_attach_mmc(struct mmc_host *host) BUG_ON(!host); WARN_ON(!host->claimed); + /* Set correct bus mode for MMC before attempting attach */ + if (!mmc_host_is_spi(host)) + mmc_set_bus_mode(host, MMC_BUSMODE_OPENDRAIN); + err = mmc_send_op_cond(host, 0, &ocr); if (err) return err; -- cgit From b2499518b5ad7e28bb3ed348fd3f370eeb1e36c0 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Mon, 29 Aug 2011 16:42:11 +0300 Subject: mmc: core: add eMMC hardware reset support eMMC's may have a hardware reset line. This patch provides a host controller operation to implement hardware reset and a function to reset and reinitialize the card. Also, for MMC, the reset is always performed before initialization. The host must set the new host capability MMC_CAP_HW_RESET to enable hardware reset. Signed-off-by: Adrian Hunter Signed-off-by: Chris Ball --- drivers/mmc/core/mmc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/mmc/core/mmc.c') diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index b74e6f14b3ac..7adc30da8366 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -402,8 +402,10 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) ext_csd[EXT_CSD_TRIM_MULT]; } - if (card->ext_csd.rev >= 5) + if (card->ext_csd.rev >= 5) { card->ext_csd.rel_param = ext_csd[EXT_CSD_WR_REL_PARAM]; + card->ext_csd.rst_n_function = ext_csd[EXT_CSD_RST_N_FUNCTION]; + } if (ext_csd[EXT_CSD_ERASED_MEM_CONT]) card->erased_byte = 0xFF; -- cgit From b87d8dbf6c410b5f2d9b6893c85baa06aa131c7c Mon Sep 17 00:00:00 2001 From: Girish K S Date: Fri, 23 Sep 2011 20:41:47 +0530 Subject: mmc: core: eMMC 4.5 Power Class Selection Feature This patch adds the power class selection feature available for mmc versions 4.0 and above. During the enumeration stage before switching to the lower data bus, check if the power class is supported for the current bus width. If the power class is available then switch to the power class and use the higher data bus. If power class is not supported then switch to the lower data bus in a worst case. Signed-off-by: Girish K S Signed-off-by: Chris Ball --- drivers/mmc/core/mmc.c | 96 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 96 insertions(+) (limited to 'drivers/mmc/core/mmc.c') diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 7adc30da8366..c2334d636fe8 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -531,6 +531,86 @@ static struct device_type mmc_type = { .groups = mmc_attr_groups, }; +/* + * Select the PowerClass for the current bus width + * If power class is defined for 4/8 bit bus in the + * extended CSD register, select it by executing the + * mmc_switch command. + */ +static int mmc_select_powerclass(struct mmc_card *card, + unsigned int bus_width, u8 *ext_csd) +{ + int err = 0; + unsigned int pwrclass_val; + unsigned int index = 0; + struct mmc_host *host; + + BUG_ON(!card); + + host = card->host; + BUG_ON(!host); + + if (ext_csd == NULL) + return 0; + + /* Power class selection is supported for versions >= 4.0 */ + if (card->csd.mmca_vsn < CSD_SPEC_VER_4) + return 0; + + /* Power class values are defined only for 4/8 bit bus */ + if (bus_width == EXT_CSD_BUS_WIDTH_1) + return 0; + + switch (1 << host->ios.vdd) { + case MMC_VDD_165_195: + if (host->ios.clock <= 26000000) + index = EXT_CSD_PWR_CL_26_195; + else if (host->ios.clock <= 52000000) + index = (bus_width <= EXT_CSD_BUS_WIDTH_8) ? + EXT_CSD_PWR_CL_52_195 : + EXT_CSD_PWR_CL_DDR_52_195; + else if (host->ios.clock <= 200000000) + index = EXT_CSD_PWR_CL_200_195; + break; + case MMC_VDD_32_33: + case MMC_VDD_33_34: + case MMC_VDD_34_35: + case MMC_VDD_35_36: + if (host->ios.clock <= 26000000) + index = EXT_CSD_PWR_CL_26_360; + else if (host->ios.clock <= 52000000) + index = (bus_width <= EXT_CSD_BUS_WIDTH_8) ? + EXT_CSD_PWR_CL_52_360 : + EXT_CSD_PWR_CL_DDR_52_360; + else if (host->ios.clock <= 200000000) + index = EXT_CSD_PWR_CL_200_360; + break; + default: + pr_warning("%s: Voltage range not supported " + "for power class.\n", mmc_hostname(host)); + return -EINVAL; + } + + pwrclass_val = ext_csd[index]; + + if (bus_width & (EXT_CSD_BUS_WIDTH_8 | EXT_CSD_DDR_BUS_WIDTH_8)) + pwrclass_val = (pwrclass_val & EXT_CSD_PWR_CL_8BIT_MASK) >> + EXT_CSD_PWR_CL_8BIT_SHIFT; + else + pwrclass_val = (pwrclass_val & EXT_CSD_PWR_CL_4BIT_MASK) >> + EXT_CSD_PWR_CL_4BIT_SHIFT; + + /* If the power class is different from the default value */ + if (pwrclass_val > 0) { + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_POWER_CLASS, + pwrclass_val, + 0); + } + + return err; +} + /* * Handle the detection and initialisation of a card. * @@ -787,6 +867,14 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, bus_width = bus_widths[idx]; if (bus_width == MMC_BUS_WIDTH_1) ddr = 0; /* no DDR for 1-bit width */ + err = mmc_select_powerclass(card, ext_csd_bits[idx][0], + ext_csd); + if (err) + pr_err("%s: power class selection to " + "bus width %d failed\n", + mmc_hostname(card->host), + 1 << bus_width); + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BUS_WIDTH, ext_csd_bits[idx][0], @@ -810,6 +898,14 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, } if (!err && ddr) { + err = mmc_select_powerclass(card, ext_csd_bits[idx][1], + ext_csd); + if (err) + pr_err("%s: power class selection to " + "bus width %d ddr %d failed\n", + mmc_hostname(card->host), + 1 << bus_width, ddr); + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BUS_WIDTH, ext_csd_bits[idx][1], -- cgit From 5238acbe36dd5100fb6b035a995ae5fc89dd0708 Mon Sep 17 00:00:00 2001 From: Andrei Warkentin Date: Sat, 24 Sep 2011 12:12:30 -0400 Subject: mmc: core: ext_csd.raw_* used in comparison but never set f39b2dd9d ("mmc: core: Bus width testing needs to handle suspend/resume") added code to only compare read-only ext_csd fields in bus width testing code, yet it's comparing some fields that are never set. The affected fields are ext_csd.raw_erased_mem_count and ext_csd.raw_partition_support. Signed-off-by: Andrei Warkentin Acked-by: Philip Rakity Cc: Signed-off-by: Chris Ball --- drivers/mmc/core/mmc.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/mmc/core/mmc.c') diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index c2334d636fe8..c632b1faf70d 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -359,6 +359,7 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) * card has the Enhanced area enabled. If so, export enhanced * area offset and size to user by adding sysfs interface. */ + card->ext_csd.raw_partition_support = ext_csd[EXT_CSD_PARTITION_SUPPORT]; if ((ext_csd[EXT_CSD_PARTITION_SUPPORT] & 0x2) && (ext_csd[EXT_CSD_PARTITION_ATTRIBUTE] & 0x1)) { u8 hc_erase_grp_sz = @@ -407,6 +408,7 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) card->ext_csd.rst_n_function = ext_csd[EXT_CSD_RST_N_FUNCTION]; } + card->ext_csd.raw_erased_mem_count = ext_csd[EXT_CSD_ERASED_MEM_CONT]; if (ext_csd[EXT_CSD_ERASED_MEM_CONT]) card->erased_byte = 0xFF; else -- cgit From e0c368d571d946ff40f068344b5c2df90c93dd2e Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Thu, 6 Oct 2011 23:41:38 +0900 Subject: mmc: core: general purpose MMC partition support. It allows gerneral purpose partitions in MMC Device. And I try to simply make mmc_blk_alloc_parts using mmc_part structure suggested by Andrei Warkentin. After patching, we see general purpose partitions like this: > cat /proc/partitions 179 0 847872 mmcblk0 179 192 4096 mmcblk0gp3 179 160 4096 mmcblk0gp2 179 128 4096 mmcblk0gp1 179 96 1052672 mmcblk0gp0 179 64 1024 mmcblk0boot1 179 32 1024 mmcblk0boot0 Signed-off-by: Namjae Jeon Acked-by: Andrei Warkentin Signed-off-by: Chris Ball --- drivers/mmc/core/mmc.c | 52 ++++++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 48 insertions(+), 4 deletions(-) (limited to 'drivers/mmc/core/mmc.c') diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index c632b1faf70d..2a4c9a4d3c00 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -239,7 +239,9 @@ static int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd) */ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) { - int err = 0; + int err = 0, idx; + unsigned int part_size; + u8 hc_erase_grp_sz = 0, hc_wp_grp_sz = 0; BUG_ON(!card); @@ -340,7 +342,14 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) * There are two boot regions of equal size, defined in * multiples of 128K. */ - card->ext_csd.boot_size = ext_csd[EXT_CSD_BOOT_MULT] << 17; + if (ext_csd[EXT_CSD_BOOT_MULT] && mmc_boot_partition_access(card->host)) { + for (idx = 0; idx < MMC_NUM_BOOT_PARTITION; idx++) { + part_size = ext_csd[EXT_CSD_BOOT_MULT] << 17; + mmc_part_add(card, part_size, + EXT_CSD_PART_CONFIG_ACC_BOOT0 + idx, + "boot%d", idx, true); + } + } } card->ext_csd.raw_hc_erase_gap_size = @@ -362,9 +371,9 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) card->ext_csd.raw_partition_support = ext_csd[EXT_CSD_PARTITION_SUPPORT]; if ((ext_csd[EXT_CSD_PARTITION_SUPPORT] & 0x2) && (ext_csd[EXT_CSD_PARTITION_ATTRIBUTE] & 0x1)) { - u8 hc_erase_grp_sz = + hc_erase_grp_sz = ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]; - u8 hc_wp_grp_sz = + hc_wp_grp_sz = ext_csd[EXT_CSD_HC_WP_GRP_SIZE]; card->ext_csd.enhanced_area_en = 1; @@ -393,6 +402,41 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) card->ext_csd.enhanced_area_offset = -EINVAL; card->ext_csd.enhanced_area_size = -EINVAL; } + + /* + * General purpose partition feature support -- + * If ext_csd has the size of general purpose partitions, + * set size, part_cfg, partition name in mmc_part. + */ + if (ext_csd[EXT_CSD_PARTITION_SUPPORT] & + EXT_CSD_PART_SUPPORT_PART_EN) { + if (card->ext_csd.enhanced_area_en != 1) { + hc_erase_grp_sz = + ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]; + hc_wp_grp_sz = + ext_csd[EXT_CSD_HC_WP_GRP_SIZE]; + + card->ext_csd.enhanced_area_en = 1; + } + + for (idx = 0; idx < MMC_NUM_GP_PARTITION; idx++) { + if (!ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3] && + !ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3 + 1] && + !ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3 + 2]) + continue; + part_size = + (ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3 + 2] + << 16) + + (ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3 + 1] + << 8) + + ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3]; + part_size *= (size_t)(hc_erase_grp_sz * + hc_wp_grp_sz); + mmc_part_add(card, part_size << 19, + EXT_CSD_PART_CONFIG_ACC_GP0 + idx, + "gp%d", idx, false); + } + } card->ext_csd.sec_trim_mult = ext_csd[EXT_CSD_SEC_TRIM_MULT]; card->ext_csd.sec_erase_mult = -- cgit From b23cf0bd55b0c6b703982446f679e00d6d929524 Mon Sep 17 00:00:00 2001 From: Seungwon Jeon Date: Fri, 23 Sep 2011 14:15:29 +0900 Subject: mmc: core: Add default timeout value for CMD6 EXT_CSD[248] includes the default maximum timeout for CMD6. This field is added at eMMC4.5 Spec. And it can be used for default timeout except for some operations which don't define the timeout (i.e. background operation, sanitize, flush cache) in eMMC4.5 Spec. Signed-off-by: Seungwon Jeon Signed-off-by: Jaehoon Chung Signed-off-by: Chris Ball --- drivers/mmc/core/mmc.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) (limited to 'drivers/mmc/core/mmc.c') diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 2a4c9a4d3c00..7dde373d1439 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -458,6 +458,12 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) else card->erased_byte = 0x0; + if (card->ext_csd.rev >= 6) + card->ext_csd.generic_cmd6_time = 10 * + ext_csd[EXT_CSD_GENERIC_CMD6_TIME]; + else + card->ext_csd.generic_cmd6_time = 0; + out: return err; } @@ -801,7 +807,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, */ if (card->ext_csd.enhanced_area_en) { err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_ERASE_GROUP_DEF, 1, 0); + EXT_CSD_ERASE_GROUP_DEF, 1, + card->ext_csd.generic_cmd6_time); if (err && err != -EBADMSG) goto free_card; @@ -844,7 +851,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, if ((card->ext_csd.hs_max_dtr != 0) && (host->caps & MMC_CAP_MMC_HIGHSPEED)) { err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_HS_TIMING, 1, 0); + EXT_CSD_HS_TIMING, 1, + card->ext_csd.generic_cmd6_time); if (err && err != -EBADMSG) goto free_card; @@ -924,7 +932,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BUS_WIDTH, ext_csd_bits[idx][0], - 0); + card->ext_csd.generic_cmd6_time); if (!err) { mmc_set_bus_width(card->host, bus_width); @@ -955,7 +963,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BUS_WIDTH, ext_csd_bits[idx][1], - 0); + card->ext_csd.generic_cmd6_time); } if (err) { printk(KERN_WARNING "%s: switch to bus width %d ddr %d " -- cgit From a3c76eb9d4a1e68a69dd880cf0bcb8a52418b993 Mon Sep 17 00:00:00 2001 From: Girish K S Date: Tue, 11 Oct 2011 11:44:09 +0530 Subject: mmc: replace printk with appropriate display macro All the files using printk function for displaying kernel messages in the mmc driver have been replaced with corresponding macro. Signed-off-by: Girish K S Signed-off-by: Chris Ball --- drivers/mmc/core/mmc.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'drivers/mmc/core/mmc.c') diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 7dde373d1439..4e869d371a03 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -101,7 +101,7 @@ static int mmc_decode_cid(struct mmc_card *card) break; default: - printk(KERN_ERR "%s: card has unknown MMCA version %d\n", + pr_err("%s: card has unknown MMCA version %d\n", mmc_hostname(card->host), card->csd.mmca_vsn); return -EINVAL; } @@ -135,7 +135,7 @@ static int mmc_decode_csd(struct mmc_card *card) */ csd->structure = UNSTUFF_BITS(resp, 126, 2); if (csd->structure == 0) { - printk(KERN_ERR "%s: unrecognised CSD structure version %d\n", + pr_err("%s: unrecognised CSD structure version %d\n", mmc_hostname(card->host), csd->structure); return -EINVAL; } @@ -195,7 +195,7 @@ static int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd) */ ext_csd = kmalloc(512, GFP_KERNEL); if (!ext_csd) { - printk(KERN_ERR "%s: could not allocate a buffer to " + pr_err("%s: could not allocate a buffer to " "receive the ext_csd.\n", mmc_hostname(card->host)); return -ENOMEM; } @@ -217,12 +217,12 @@ static int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd) * stored in their CSD. */ if (card->csd.capacity == (4096 * 512)) { - printk(KERN_ERR "%s: unable to read EXT_CSD " + pr_err("%s: unable to read EXT_CSD " "on a possible high capacity card. " "Card will be ignored.\n", mmc_hostname(card->host)); } else { - printk(KERN_WARNING "%s: unable to read " + pr_warning("%s: unable to read " "EXT_CSD, performance might " "suffer.\n", mmc_hostname(card->host)); @@ -252,7 +252,7 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) card->ext_csd.raw_ext_csd_structure = ext_csd[EXT_CSD_STRUCTURE]; if (card->csd.structure == 3) { if (card->ext_csd.raw_ext_csd_structure > 2) { - printk(KERN_ERR "%s: unrecognised EXT_CSD structure " + pr_err("%s: unrecognised EXT_CSD structure " "version %d\n", mmc_hostname(card->host), card->ext_csd.raw_ext_csd_structure); err = -EINVAL; @@ -262,7 +262,7 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) card->ext_csd.rev = ext_csd[EXT_CSD_REV]; if (card->ext_csd.rev > 6) { - printk(KERN_ERR "%s: unrecognised EXT_CSD revision %d\n", + pr_err("%s: unrecognised EXT_CSD revision %d\n", mmc_hostname(card->host), card->ext_csd.rev); err = -EINVAL; goto out; @@ -308,7 +308,7 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) break; default: /* MMC v4 spec says this cannot happen */ - printk(KERN_WARNING "%s: card is mmc v4 but doesn't " + pr_warning("%s: card is mmc v4 but doesn't " "support any high-speed modes.\n", mmc_hostname(card->host)); } @@ -857,7 +857,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, goto free_card; if (err) { - printk(KERN_WARNING "%s: switch to highspeed failed\n", + pr_warning("%s: switch to highspeed failed\n", mmc_hostname(card->host)); err = 0; } else { @@ -966,7 +966,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, card->ext_csd.generic_cmd6_time); } if (err) { - printk(KERN_WARNING "%s: switch to bus width %d ddr %d " + pr_warning("%s: switch to bus width %d ddr %d " "failed\n", mmc_hostname(card->host), 1 << bus_width, ddr); goto free_card; @@ -1204,7 +1204,7 @@ int mmc_attach_mmc(struct mmc_host *host) * support. */ if (ocr & 0x7F) { - printk(KERN_WARNING "%s: card claims to support voltages " + pr_warning("%s: card claims to support voltages " "below the defined range. These will be ignored.\n", mmc_hostname(host)); ocr &= ~0x7F; @@ -1243,7 +1243,7 @@ remove_card: err: mmc_detach_bus(host); - printk(KERN_ERR "%s: error %d whilst initialising MMC card\n", + pr_err("%s: error %d whilst initialising MMC card\n", mmc_hostname(host), err); return err; -- cgit From bec8726abc72bf30d2743a722aa37cd69e7a0580 Mon Sep 17 00:00:00 2001 From: Girish K S Date: Thu, 13 Oct 2011 12:04:16 +0530 Subject: mmc: core: Add Power Off Notify Feature eMMC 4.5 This patch adds support for the power off notify feature, available in eMMC 4.5 devices. If the host has support for this feature, then the mmc core will notify the device by setting the POWER_OFF_NOTIFICATION byte in the extended csd register with a value of 1 (POWER_ON). For suspend mode short timeout is used, whereas for the normal poweroff long timeout is used. Signed-off-by: Girish K S Signed-off-by: Jaehoon Chung Signed-off-by: Chris Ball --- drivers/mmc/core/mmc.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) (limited to 'drivers/mmc/core/mmc.c') diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 4e869d371a03..f8ea9387d75c 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -458,10 +458,12 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) else card->erased_byte = 0x0; - if (card->ext_csd.rev >= 6) + if (card->ext_csd.rev >= 6) { card->ext_csd.generic_cmd6_time = 10 * ext_csd[EXT_CSD_GENERIC_CMD6_TIME]; - else + card->ext_csd.power_off_longtime = 10 * + ext_csd[EXT_CSD_POWER_OFF_LONG_TIME]; + } else card->ext_csd.generic_cmd6_time = 0; out: @@ -845,6 +847,23 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, goto free_card; } + /* + * If the host supports the power_off_notify capability then + * set the notification byte in the ext_csd register of device + */ + if ((host->caps2 & MMC_CAP2_POWEROFF_NOTIFY) && + (card->poweroff_notify_state == MMC_NO_POWER_NOTIFICATION)) { + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_POWER_OFF_NOTIFICATION, + EXT_CSD_POWER_ON, + card->ext_csd.generic_cmd6_time); + if (err && err != -EBADMSG) + goto free_card; + } + + if (!err) + card->poweroff_notify_state = MMC_POWERED_ON; + /* * Activate high speed (if supported) */ -- cgit From b3bf915308ca2b50f3beec6cc824083870f0f4b5 Mon Sep 17 00:00:00 2001 From: Kyungmin Park Date: Tue, 18 Oct 2011 09:34:04 +0900 Subject: mmc: core: new discard feature support at eMMC v4.5 MMC v4.5 supports the DISCARD feature (CMD38). It's different from trim and there's no check bit. Currently it's only supported at v4.5. Signed-off-by: Kyungmin Park Signed-off-by: Jaehoon Chung Signed-off-by: Chris Ball --- drivers/mmc/core/mmc.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/mmc/core/mmc.c') diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index f8ea9387d75c..54088768776c 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -452,6 +452,10 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) card->ext_csd.rst_n_function = ext_csd[EXT_CSD_RST_N_FUNCTION]; } + /* eMMC v4.5 or later */ + if (card->ext_csd.rev >= 6) + card->ext_csd.feature_support |= MMC_DISCARD_FEATURE; + card->ext_csd.raw_erased_mem_count = ext_csd[EXT_CSD_ERASED_MEM_CONT]; if (ext_csd[EXT_CSD_ERASED_MEM_CONT]) card->erased_byte = 0xFF; -- cgit From 71fe3eb0d006861bdae57e93975b6ae3d9b55e99 Mon Sep 17 00:00:00 2001 From: Seungwon Jeon Date: Tue, 18 Oct 2011 13:20:57 +0900 Subject: mmc: core: Modify the timeout value for writing power class This patch will apply the generic CMD6 timeout to switch command for power class. Signed-off-by: Seungwon Jeon Signed-off-by: Chris Ball --- drivers/mmc/core/mmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/mmc/core/mmc.c') diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 54088768776c..793901519208 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -663,7 +663,7 @@ static int mmc_select_powerclass(struct mmc_card *card, err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_POWER_CLASS, pwrclass_val, - 0); + card->ext_csd.generic_cmd6_time); } return err; -- cgit From 881d1c25f765938a95def5afe39486ce39f9fc96 Mon Sep 17 00:00:00 2001 From: Seungwon Jeon Date: Fri, 14 Oct 2011 14:03:21 +0900 Subject: mmc: core: Add cache control for eMMC4.5 device This patch adds cache feature of eMMC4.5 Spec. If device supports cache capability, host can utilize some specific operations. Signed-off-by: Seungwon Jeon Signed-off-by: Jaehoon Chung Signed-off-by: Chris Ball --- drivers/mmc/core/mmc.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'drivers/mmc/core/mmc.c') diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 793901519208..de5900aa81cd 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -470,6 +470,12 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) } else card->ext_csd.generic_cmd6_time = 0; + card->ext_csd.cache_size = + ext_csd[EXT_CSD_CACHE_SIZE + 0] << 0 | + ext_csd[EXT_CSD_CACHE_SIZE + 1] << 8 | + ext_csd[EXT_CSD_CACHE_SIZE + 2] << 16 | + ext_csd[EXT_CSD_CACHE_SIZE + 3] << 24; + out: return err; } @@ -1020,6 +1026,23 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, } } + /* + * If cache size is higher than 0, this indicates + * the existence of cache and it can be turned on. + */ + if ((host->caps2 & MMC_CAP2_CACHE_CTRL) && + card->ext_csd.cache_size > 0) { + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_CACHE_CTRL, 1, 0); + if (err && err != -EBADMSG) + goto free_card; + + /* + * Only if no error, cache is turned on successfully. + */ + card->ext_csd.cache_ctrl = err ? 0 : 1; + } + if (!oldcard) host->card = card; -- cgit From eb0d8f135b6730d6d0324a064664d121334290e7 Mon Sep 17 00:00:00 2001 From: Jaehoon Chung Date: Tue, 18 Oct 2011 01:26:42 -0400 Subject: mmc: core: support HPI send command HPI command is defined in eMMC4.41. This feature is important for eMMC4.5 devices. Signed-off-by: Jaehoon Chung Signed-off-by: Chris Ball --- drivers/mmc/core/mmc.c | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) (limited to 'drivers/mmc/core/mmc.c') diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index de5900aa81cd..fb5bf01dd1b2 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -448,6 +448,21 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) } if (card->ext_csd.rev >= 5) { + /* check whether the eMMC card supports HPI */ + if (ext_csd[EXT_CSD_HPI_FEATURES] & 0x1) { + card->ext_csd.hpi = 1; + if (ext_csd[EXT_CSD_HPI_FEATURES] & 0x2) + card->ext_csd.hpi_cmd = MMC_STOP_TRANSMISSION; + else + card->ext_csd.hpi_cmd = MMC_SEND_STATUS; + /* + * Indicate the maximum timeout to close + * a command interrupted by HPI + */ + card->ext_csd.out_of_int_time = + ext_csd[EXT_CSD_OUT_OF_INTERRUPT_TIME] * 10; + } + card->ext_csd.rel_param = ext_csd[EXT_CSD_WR_REL_PARAM]; card->ext_csd.rst_n_function = ext_csd[EXT_CSD_RST_N_FUNCTION]; } @@ -895,6 +910,22 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, } } + /* + * Enable HPI feature (if supported) + */ + if (card->ext_csd.hpi) { + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_HPI_MGMT, 1, 0); + if (err && err != -EBADMSG) + goto free_card; + if (err) { + pr_warning("%s: Enabling HPI failed\n", + mmc_hostname(card->host)); + err = 0; + } else + card->ext_csd.hpi_en = 1; + } + /* * Compute bus speed. */ -- cgit From 336c716ae2272c9a26a6f82976d0e077d8ca824e Mon Sep 17 00:00:00 2001 From: Seungwon Jeon Date: Tue, 25 Oct 2011 09:43:12 +0900 Subject: mmc: core: Cleanup eMMC4.5 conditionals Code cleanup, putting all eMMC 4.5 detection cases together. This patch removes one if-statement and assembles all. And it also removes variable initialization below else-statement -- all members of card structure are already set to zero at card-init. Signed-off-by: Seungwon Jeon Signed-off-by: Chris Ball --- drivers/mmc/core/mmc.c | 20 +++++++++----------- 1 file changed, 9 insertions(+), 11 deletions(-) (limited to 'drivers/mmc/core/mmc.c') diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index fb5bf01dd1b2..36270449dd9d 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -467,29 +467,27 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) card->ext_csd.rst_n_function = ext_csd[EXT_CSD_RST_N_FUNCTION]; } - /* eMMC v4.5 or later */ - if (card->ext_csd.rev >= 6) - card->ext_csd.feature_support |= MMC_DISCARD_FEATURE; - card->ext_csd.raw_erased_mem_count = ext_csd[EXT_CSD_ERASED_MEM_CONT]; if (ext_csd[EXT_CSD_ERASED_MEM_CONT]) card->erased_byte = 0xFF; else card->erased_byte = 0x0; + /* eMMC v4.5 or later */ if (card->ext_csd.rev >= 6) { + card->ext_csd.feature_support |= MMC_DISCARD_FEATURE; + card->ext_csd.generic_cmd6_time = 10 * ext_csd[EXT_CSD_GENERIC_CMD6_TIME]; card->ext_csd.power_off_longtime = 10 * ext_csd[EXT_CSD_POWER_OFF_LONG_TIME]; - } else - card->ext_csd.generic_cmd6_time = 0; - card->ext_csd.cache_size = - ext_csd[EXT_CSD_CACHE_SIZE + 0] << 0 | - ext_csd[EXT_CSD_CACHE_SIZE + 1] << 8 | - ext_csd[EXT_CSD_CACHE_SIZE + 2] << 16 | - ext_csd[EXT_CSD_CACHE_SIZE + 3] << 24; + card->ext_csd.cache_size = + ext_csd[EXT_CSD_CACHE_SIZE + 0] << 0 | + ext_csd[EXT_CSD_CACHE_SIZE + 1] << 8 | + ext_csd[EXT_CSD_CACHE_SIZE + 2] << 16 | + ext_csd[EXT_CSD_CACHE_SIZE + 3] << 24; + } out: return err; -- cgit