From 35edc2a5095efb189e60dc32bbb9d2663aec6d24 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Sun, 20 Nov 2011 20:36:02 +0100 Subject: perf, arch: Rework perf_event_index() Put the logic to compute the event index into a per pmu method. This is required because the x86 rules are weird and wonderful and don't match the capabilities of the current scheme. AFAIK only powerpc actually has a usable userspace read of the PMCs but I'm not at all sure anybody actually used that. ARM is restored to the default since it currently does not support userspace access at all. And all software events are provided with a method that reports their index as 0 (disabled). Signed-off-by: Peter Zijlstra Cc: Michael Cree Cc: Will Deacon Cc: Deng-Cheng Zhu Cc: Anton Blanchard Cc: Eric B Munson Cc: Heiko Carstens Cc: Paul Mundt Cc: David S. Miller Cc: Richard Kuo Cc: Stephane Eranian Cc: Arun Sharma Link: http://lkml.kernel.org/n/tip-dfydxodki16lylkt3gl2j7cw@git.kernel.org Signed-off-by: Ingo Molnar --- include/linux/perf_event.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 08855613ceb3..02545e6df95b 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -680,6 +680,12 @@ struct pmu { * for each successful ->add() during the transaction. */ void (*cancel_txn) (struct pmu *pmu); /* optional */ + + /* + * Will return the value for perf_event_mmap_page::index for this event, + * if no implementation is provided it will default to: event->hw.idx + 1. + */ + int (*event_idx) (struct perf_event *event); /*optional */ }; /** -- cgit From 0c9d42ed4cee2aa1dfc3a260b741baae8615744f Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Sun, 20 Nov 2011 23:30:47 +0100 Subject: perf, x86: Provide means for disabling userspace RDPMC Allow the disabling of RDPMC via a pmu specific attribute: echo 0 > /sys/bus/event_source/devices/cpu/rdpmc Signed-off-by: Peter Zijlstra Cc: Stephane Eranian Cc: Arun Sharma Link: http://lkml.kernel.org/n/tip-pqeog465zo5hsimtkfz73f27@git.kernel.org Signed-off-by: Ingo Molnar --- include/linux/perf_event.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 02545e6df95b..5311b79fe62c 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -615,6 +615,7 @@ struct pmu { struct list_head entry; struct device *dev; + const struct attribute_group **attr_groups; char *name; int type; -- cgit From e3f3541c19c89a4daae39300defba68943301949 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 21 Nov 2011 11:43:53 +0100 Subject: perf: Extend the mmap control page with time (TSC) fields Extend the mmap control page with fields so that userspace can compute time deltas relative to the provided time fields. Currently only implemented for x86 with constant and nonstop TSC. Signed-off-by: Peter Zijlstra Cc: Stephane Eranian Cc: Arun Sharma Link: http://lkml.kernel.org/n/tip-3u1jucza77j3wuvs0x2bic0f@git.kernel.org Signed-off-by: Ingo Molnar --- include/linux/perf_event.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 5311b79fe62c..0b91db2522cc 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -291,12 +291,14 @@ struct perf_event_mmap_page { __s64 offset; /* add to hardware event value */ __u64 time_enabled; /* time event active */ __u64 time_running; /* time event on cpu */ + __u32 time_mult, time_shift; + __u64 time_offset; /* * Hole for extension of the self monitor capabilities */ - __u64 __reserved[123]; /* align to 1k */ + __u64 __reserved[121]; /* align to 1k */ /* * Control data for the mmap() data buffer. -- cgit From a63b9072ea4e32c1fde8b783ccf6e4288414660b Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Fri, 20 Jan 2012 11:58:09 +0800 Subject: cgroup: remove cgroup_attach_task_current_cg() It's just a wrapper of cgroup_attach_task_all(), and it's no longer used after commit 87d6a412bd1ed82c14cabd4b408003b23bbd2880 (vhost: fix attach to cgroups regression) Signed-off-by: Li Zefan Signed-off-by: Tejun Heo --- include/linux/cgroup.h | 9 --------- 1 file changed, 9 deletions(-) (limited to 'include/linux') diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h index e9b602151caf..dee53bdb046d 100644 --- a/include/linux/cgroup.h +++ b/include/linux/cgroup.h @@ -602,11 +602,6 @@ int cgroup_scan_tasks(struct cgroup_scanner *scan); int cgroup_attach_task(struct cgroup *, struct task_struct *); int cgroup_attach_task_all(struct task_struct *from, struct task_struct *); -static inline int cgroup_attach_task_current_cg(struct task_struct *tsk) -{ - return cgroup_attach_task_all(current, tsk); -} - /* * CSS ID is ID for cgroup_subsys_state structs under subsys. This only works * if cgroup_subsys.use_id == true. It can be used for looking up and scanning. @@ -669,10 +664,6 @@ static inline int cgroup_attach_task_all(struct task_struct *from, { return 0; } -static inline int cgroup_attach_task_current_cg(struct task_struct *t) -{ - return 0; -} #endif /* !CONFIG_CGROUPS */ -- cgit From 245282557c49754af3dbcc732316e814340d6bce Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Fri, 20 Jan 2012 11:58:43 +0800 Subject: cgroup: move struct cgroup_pidlist out from the header file It's internally used only. Signed-off-by: Li Zefan Signed-off-by: Tejun Heo --- include/linux/cgroup.h | 32 -------------------------------- 1 file changed, 32 deletions(-) (limited to 'include/linux') diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h index dee53bdb046d..7da3e745b74c 100644 --- a/include/linux/cgroup.h +++ b/include/linux/cgroup.h @@ -160,38 +160,6 @@ enum { CGRP_CLONE_CHILDREN, }; -/* which pidlist file are we talking about? */ -enum cgroup_filetype { - CGROUP_FILE_PROCS, - CGROUP_FILE_TASKS, -}; - -/* - * A pidlist is a list of pids that virtually represents the contents of one - * of the cgroup files ("procs" or "tasks"). We keep a list of such pidlists, - * a pair (one each for procs, tasks) for each pid namespace that's relevant - * to the cgroup. - */ -struct cgroup_pidlist { - /* - * used to find which pidlist is wanted. doesn't change as long as - * this particular list stays in the list. - */ - struct { enum cgroup_filetype type; struct pid_namespace *ns; } key; - /* array of xids */ - pid_t *list; - /* how many elements the above list has */ - int length; - /* how many files are using the current array */ - int use_count; - /* each of these stored in a list by its cgroup */ - struct list_head links; - /* pointer to the cgroup we belong to, for list removal purposes */ - struct cgroup *owner; - /* protects the other fields */ - struct rw_semaphore mutex; -}; - struct cgroup { unsigned long flags; /* "unsigned long" so bitops work */ -- cgit From 5ea4399457f730b4614d0632ceefd3e8f53fb1e6 Mon Sep 17 00:00:00 2001 From: "Shimoda, Yoshihiro" Date: Thu, 5 Jan 2012 15:37:22 +0900 Subject: usb: renesas_usbhs: add support for SUDMAC The SUDMAC uses 8-bit width only. So, when the driver uses SUDMAC, we have to clear the MBW_32. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Felipe Balbi --- include/linux/usb/renesas_usbhs.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/usb/renesas_usbhs.h b/include/linux/usb/renesas_usbhs.h index 0d3f98879256..547e59cc00ea 100644 --- a/include/linux/usb/renesas_usbhs.h +++ b/include/linux/usb/renesas_usbhs.h @@ -149,6 +149,7 @@ struct renesas_usbhs_driver_param { * option: */ u32 has_otg:1; /* for controlling PWEN/EXTLP */ + u32 has_sudmac:1; /* for SUDMAC */ }; /* -- cgit From b0f70292053a0f68f406564a721a7a3f2d66b44f Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Mon, 2 Jan 2012 08:41:23 +0100 Subject: ssb: SPROM: extract each core power info MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We already extract some basic info but it's incomplete, reads info about the first core only. Used data structure doesn't allow easy adding of more cores. This patch adds new struct and array for storing power info. The plan is to: switch all extractors (including the ones using NVRAM) to new struct, switch drivers, then deprecate and finally drop old SSB fields. Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- include/linux/ssb/ssb.h | 8 ++++++++ include/linux/ssb/ssb_regs.h | 34 ++++++++++++++++++++++++++++++++++ 2 files changed, 42 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h index dcf35b0f303a..bbc2612cb64a 100644 --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h @@ -16,6 +16,12 @@ struct pcmcia_device; struct ssb_bus; struct ssb_driver; +struct ssb_sprom_core_pwr_info { + u8 itssi_2g, itssi_5g; + u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh; + u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3]; +}; + struct ssb_sprom { u8 revision; u8 il0mac[6]; /* MAC address for 802.11b/g */ @@ -82,6 +88,8 @@ struct ssb_sprom { u16 boardflags2_hi; /* Board flags (bits 48-63) */ /* TODO store board flags in a single u64 */ + struct ssb_sprom_core_pwr_info core_pwr_info[4]; + /* Antenna gain values for up to 4 antennas * on each band. Values in dBm/4 (Q5.2). Negative gain means the * loss in the connectors is bigger than the gain. */ diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h index c814ae6eeb22..40b1ef8595ee 100644 --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h @@ -449,6 +449,39 @@ #define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6 #define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8 #define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA + +/* There are 4 blocks with power info sharing the same layout */ +#define SSB_SROM8_PWR_INFO_CORE0 0x00C0 +#define SSB_SROM8_PWR_INFO_CORE1 0x00E0 +#define SSB_SROM8_PWR_INFO_CORE2 0x0100 +#define SSB_SROM8_PWR_INFO_CORE3 0x0120 + +#define SSB_SROM8_2G_MAXP_ITSSI 0x00 +#define SSB_SPROM8_2G_MAXP 0x00FF +#define SSB_SPROM8_2G_ITSSI 0xFF00 +#define SSB_SPROM8_2G_ITSSI_SHIFT 8 +#define SSB_SROM8_2G_PA_0 0x02 /* 2GHz power amp settings */ +#define SSB_SROM8_2G_PA_1 0x04 +#define SSB_SROM8_2G_PA_2 0x06 +#define SSB_SROM8_5G_MAXP_ITSSI 0x08 /* 5GHz ITSSI and 5.3GHz Max Power */ +#define SSB_SPROM8_5G_MAXP 0x00FF +#define SSB_SPROM8_5G_ITSSI 0xFF00 +#define SSB_SPROM8_5G_ITSSI_SHIFT 8 +#define SSB_SPROM8_5GHL_MAXP 0x0A /* 5.2GHz and 5.8GHz Max Power */ +#define SSB_SPROM8_5GH_MAXP 0x00FF +#define SSB_SPROM8_5GL_MAXP 0xFF00 +#define SSB_SPROM8_5GL_MAXP_SHIFT 8 +#define SSB_SROM8_5G_PA_0 0x0C /* 5.3GHz power amp settings */ +#define SSB_SROM8_5G_PA_1 0x0E +#define SSB_SROM8_5G_PA_2 0x10 +#define SSB_SROM8_5GL_PA_0 0x12 /* 5.2GHz power amp settings */ +#define SSB_SROM8_5GL_PA_1 0x14 +#define SSB_SROM8_5GL_PA_2 0x16 +#define SSB_SROM8_5GH_PA_0 0x18 /* 5.8GHz power amp settings */ +#define SSB_SROM8_5GH_PA_1 0x1A +#define SSB_SROM8_5GH_PA_2 0x1C + +/* TODO: Make it deprecated */ #define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */ #define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ @@ -473,6 +506,7 @@ #define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */ #define SSB_SPROM8_PA1HIB1 0x00DA #define SSB_SPROM8_PA1HIB2 0x00DC + #define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */ #define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */ #define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */ -- cgit From d5a2ca60e41fec4ede7b82d3608278523cffe77b Mon Sep 17 00:00:00 2001 From: Ilan Elias Date: Tue, 17 Jan 2012 11:06:43 +0200 Subject: NFC: Export new attributes sensb_res and sensf_res Export new attributes sensb_res for tech B and sensf_res for tech F in the target info (returned as a response to NFC_CMD_GET_TARGET). The max size of the attributes nfcid1, sensb_res and sensf_res is exported to user space though include/linux/nfc. Signed-off-by: Ilan Elias Acked-by: Samuel Ortiz Signed-off-by: John W. Linville --- include/linux/nfc.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nfc.h b/include/linux/nfc.h index 01d4e5d60325..b4999abcb2a2 100644 --- a/include/linux/nfc.h +++ b/include/linux/nfc.h @@ -89,6 +89,8 @@ enum nfc_commands { * @NFC_ATTR_TARGET_SEL_RES: NFC-A targets extra information (useful if the * target is not NFC-Forum compliant) * @NFC_ATTR_TARGET_NFCID1: NFC-A targets identifier, max 10 bytes + * @NFC_ATTR_TARGET_SENSB_RES: NFC-B targets extra information, max 12 bytes + * @NFC_ATTR_TARGET_SENSF_RES: NFC-F targets extra information, max 18 bytes * @NFC_ATTR_COMM_MODE: Passive or active mode * @NFC_ATTR_RF_MODE: Initiator or target */ @@ -101,6 +103,8 @@ enum nfc_attrs { NFC_ATTR_TARGET_SENS_RES, NFC_ATTR_TARGET_SEL_RES, NFC_ATTR_TARGET_NFCID1, + NFC_ATTR_TARGET_SENSB_RES, + NFC_ATTR_TARGET_SENSF_RES, NFC_ATTR_COMM_MODE, NFC_ATTR_RF_MODE, /* private: internal use only */ @@ -109,6 +113,9 @@ enum nfc_attrs { #define NFC_ATTR_MAX (__NFC_ATTR_AFTER_LAST - 1) #define NFC_DEVICE_NAME_MAXSIZE 8 +#define NFC_NFCID1_MAXSIZE 10 +#define NFC_SENSB_RES_MAXSIZE 12 +#define NFC_SENSF_RES_MAXSIZE 18 /* NFC protocols */ #define NFC_PROTO_JEWEL 1 -- cgit From 87e6f968339bcdda56b39572c7e63331192296a0 Mon Sep 17 00:00:00 2001 From: Jim Cromie Date: Mon, 19 Dec 2011 17:11:13 -0500 Subject: dynamic_debug: drop enabled field from struct _ddebug, use _DPRINTK_FLAGS_PRINT Currently any enabled dynamic-debug flag on a pr_debug callsite will enable printing, even if _DPRINTK_FLAGS_PRINT is off. Checking print flag directly allows "-p" to disable callsites without fussing with other flags, so the following disables everything, without altering flags user may have set: echo -p > $DBGFS/dynamic_debug/control Signed-off-by: Jim Cromie Signed-off-by: Jason Baron Signed-off-by: Greg Kroah-Hartman --- include/linux/dynamic_debug.h | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/dynamic_debug.h b/include/linux/dynamic_debug.h index 0564e3c39882..f71a6b046245 100644 --- a/include/linux/dynamic_debug.h +++ b/include/linux/dynamic_debug.h @@ -28,7 +28,6 @@ struct _ddebug { #define _DPRINTK_FLAGS_INCL_TID (1<<4) #define _DPRINTK_FLAGS_DEFAULT 0 unsigned int flags:8; - char enabled; } __attribute__((aligned(8))); @@ -62,21 +61,20 @@ int __dynamic_netdev_dbg(struct _ddebug *descriptor, .format = (fmt), \ .lineno = __LINE__, \ .flags = _DPRINTK_FLAGS_DEFAULT, \ - .enabled = false, \ } #define dynamic_pr_debug(fmt, ...) \ do { \ DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt); \ - if (unlikely(descriptor.enabled)) \ + if (unlikely(descriptor.flags & _DPRINTK_FLAGS_PRINT)) \ __dynamic_pr_debug(&descriptor, pr_fmt(fmt), \ ##__VA_ARGS__); \ } while (0) #define dynamic_dev_dbg(dev, fmt, ...) \ do { \ - DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt); \ - if (unlikely(descriptor.enabled)) \ + DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt); \ + if (unlikely(descriptor.flags & _DPRINTK_FLAGS_PRINT)) \ __dynamic_dev_dbg(&descriptor, dev, fmt, \ ##__VA_ARGS__); \ } while (0) @@ -84,7 +82,7 @@ do { \ #define dynamic_netdev_dbg(dev, fmt, ...) \ do { \ DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt); \ - if (unlikely(descriptor.enabled)) \ + if (unlikely(descriptor.flags & _DPRINTK_FLAGS_PRINT)) \ __dynamic_netdev_dbg(&descriptor, dev, fmt, \ ##__VA_ARGS__); \ } while (0) -- cgit From b558c96ffa53f4b3dd52b774e4fb7a52982ab52b Mon Sep 17 00:00:00 2001 From: Jim Cromie Date: Mon, 19 Dec 2011 17:11:18 -0500 Subject: dynamic_debug: make dynamic-debug supersede DEBUG ccflag If CONFIG_DYNAMIC_DEBUG is defined, honor it over DEBUG, so that pr_debug()s are controllable, instead of always-on. When DEBUG is also defined, change _DPRINTK_FLAGS_DEFAULT to enable printing by default. Also adding _DPRINTK_FLAGS_INCL_MODNAME would be nice, but there are numerous cases of pr_debug(NAME ": ...), which would result in double printing of module-name. So defer this until things settle. Cc: David Miller Cc: Joe Perches Signed-off-by: Jim Cromie Signed-off-by: Jason Baron Signed-off-by: Greg Kroah-Hartman --- include/linux/device.h | 8 ++++---- include/linux/dynamic_debug.h | 4 ++++ include/linux/netdevice.h | 8 ++++---- include/linux/printk.h | 8 ++++---- 4 files changed, 16 insertions(+), 12 deletions(-) (limited to 'include/linux') diff --git a/include/linux/device.h b/include/linux/device.h index 5b3adb8f9588..a782d7ff9e8b 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -945,14 +945,14 @@ int _dev_info(const struct device *dev, const char *fmt, ...) #define dev_info(dev, fmt, arg...) _dev_info(dev, fmt, ##arg) -#if defined(DEBUG) -#define dev_dbg(dev, format, arg...) \ - dev_printk(KERN_DEBUG, dev, format, ##arg) -#elif defined(CONFIG_DYNAMIC_DEBUG) +#if defined(CONFIG_DYNAMIC_DEBUG) #define dev_dbg(dev, format, ...) \ do { \ dynamic_dev_dbg(dev, format, ##__VA_ARGS__); \ } while (0) +#elif defined(DEBUG) +#define dev_dbg(dev, format, arg...) \ + dev_printk(KERN_DEBUG, dev, format, ##arg) #else #define dev_dbg(dev, format, arg...) \ ({ \ diff --git a/include/linux/dynamic_debug.h b/include/linux/dynamic_debug.h index f71a6b046245..29ea09ae30cf 100644 --- a/include/linux/dynamic_debug.h +++ b/include/linux/dynamic_debug.h @@ -26,7 +26,11 @@ struct _ddebug { #define _DPRINTK_FLAGS_INCL_FUNCNAME (1<<2) #define _DPRINTK_FLAGS_INCL_LINENO (1<<3) #define _DPRINTK_FLAGS_INCL_TID (1<<4) +#if defined DEBUG +#define _DPRINTK_FLAGS_DEFAULT _DPRINTK_FLAGS_PRINT +#else #define _DPRINTK_FLAGS_DEFAULT 0 +#endif unsigned int flags:8; } __attribute__((aligned(8))); diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 0eac07c95255..f486f635e7b5 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2687,14 +2687,14 @@ int netdev_info(const struct net_device *dev, const char *format, ...); #define MODULE_ALIAS_NETDEV(device) \ MODULE_ALIAS("netdev-" device) -#if defined(DEBUG) -#define netdev_dbg(__dev, format, args...) \ - netdev_printk(KERN_DEBUG, __dev, format, ##args) -#elif defined(CONFIG_DYNAMIC_DEBUG) +#if defined(CONFIG_DYNAMIC_DEBUG) #define netdev_dbg(__dev, format, args...) \ do { \ dynamic_netdev_dbg(__dev, format, ##args); \ } while (0) +#elif defined(DEBUG) +#define netdev_dbg(__dev, format, args...) \ + netdev_printk(KERN_DEBUG, __dev, format, ##args) #else #define netdev_dbg(__dev, format, args...) \ ({ \ diff --git a/include/linux/printk.h b/include/linux/printk.h index f0e22f75143f..f9abd9357a0c 100644 --- a/include/linux/printk.h +++ b/include/linux/printk.h @@ -180,13 +180,13 @@ extern void dump_stack(void) __cold; #endif /* If you are writing a driver, please use dev_dbg instead */ -#if defined(DEBUG) -#define pr_debug(fmt, ...) \ - printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__) -#elif defined(CONFIG_DYNAMIC_DEBUG) +#if defined(CONFIG_DYNAMIC_DEBUG) /* dynamic_pr_debug() uses pr_fmt() internally so we don't need it here */ #define pr_debug(fmt, ...) \ dynamic_pr_debug(fmt, ##__VA_ARGS__) +#elif defined(DEBUG) +#define pr_debug(fmt, ...) \ + printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__) #else #define pr_debug(fmt, ...) \ no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__) -- cgit From 5ca7d2a6c5e4f24dfe39e8383c6d32e61d95d16a Mon Sep 17 00:00:00 2001 From: Jim Cromie Date: Mon, 19 Dec 2011 17:12:44 -0500 Subject: dynamic_debug: describe_flags with '=[pmflt_]*' Change describe_flags() to emit '=[pmflt_]+' for current callsite flags, or just '=_' when they're disabled. Having '=' in output allows a more selective grep expression; in contrast '-' may appear in filenames, line-ranges, and format-strings. '=' also has better mnemonics, saying; "the current setting is equal to ". This allows grep "=_" /dynamic_debug/control to see disabled callsites while avoiding the many occurrences of " = " seen in format strings. Enlarge flagsbufs to handle additional flag char, and alter ddebug_parse_flags() to allow flags=0, so that user can turn off all debug flags via: ~# echo =_ > /dynamic_debug/control Signed-off-by: Jim Cromie Signed-off-by: Jason Baron Signed-off-by: Greg Kroah-Hartman --- include/linux/dynamic_debug.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/dynamic_debug.h b/include/linux/dynamic_debug.h index 29ea09ae30cf..fc39640f2dea 100644 --- a/include/linux/dynamic_debug.h +++ b/include/linux/dynamic_debug.h @@ -21,7 +21,8 @@ struct _ddebug { * The bits here are changed dynamically when the user * writes commands to /dynamic_debug/control */ -#define _DPRINTK_FLAGS_PRINT (1<<0) /* printk() a message using the format */ +#define _DPRINTK_FLAGS_NONE 0 +#define _DPRINTK_FLAGS_PRINT (1<<0) /* printk() a message using the format */ #define _DPRINTK_FLAGS_INCL_MODNAME (1<<1) #define _DPRINTK_FLAGS_INCL_FUNCNAME (1<<2) #define _DPRINTK_FLAGS_INCL_LINENO (1<<3) -- cgit From e703ddae383abb24b1c7f363cb0df7e78a44ea45 Mon Sep 17 00:00:00 2001 From: Jim Cromie Date: Mon, 19 Dec 2011 17:12:59 -0500 Subject: dynamic_debug: reduce lineno field to a saner 18 bits lineno:24 allows files with 4 million lines, an insane file-size, even for never-to-get-in-tree machine generated code. Reduce this to 18 bits, which still allows 256k lines. This is still insanely big, but its not raving mad. Signed-off-by: Jim Cromie Signed-off-by: Jason Baron Signed-off-by: Greg Kroah-Hartman --- include/linux/dynamic_debug.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/dynamic_debug.h b/include/linux/dynamic_debug.h index fc39640f2dea..7e3c53a900d8 100644 --- a/include/linux/dynamic_debug.h +++ b/include/linux/dynamic_debug.h @@ -15,7 +15,7 @@ struct _ddebug { const char *function; const char *filename; const char *format; - unsigned int lineno:24; + unsigned int lineno:18; /* * The flags field controls the behaviour at the callsite. * The bits here are changed dynamically when the user -- cgit From 593a27c4b212e2afdf772a1f8dcb894e91bda0fa Mon Sep 17 00:00:00 2001 From: Konstantin Khlebnikov Date: Thu, 5 Jan 2012 13:04:21 +0400 Subject: tty: cleanup prohibition of direct opening for unix98 pty master cleanup hack added in v2.6.27-3203-g15582d3 comment from that patch: : pty: If the administrator creates a device for a ptmx slave we should not error : : The open path for ptmx slaves is via the ptmx device. Opening them any : other way is not allowed. Vegard Nossum found that previously this was not : the case and mknod foo c 128 42; cat foo would produce nasty diagnostics : : Signed-off-by: Alan Cox : Signed-off-by: Linus Torvalds devpts_get_tty() returns non-null only for inodes on devpts, but there is no inodes for master-devices, /dev/ptmx (/dev/pts/ptmx) is the only way to open them. Thus we can completely forbid lookup for master-devices and eliminate that hack in tty_init_dev() because tty_open() will get EIO from tty_driver_lookup_tty(). Signed-off-by: Konstantin Khlebnikov Signed-off-by: Greg Kroah-Hartman --- include/linux/tty.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/tty.h b/include/linux/tty.h index 5dbb3cb05a82..d3ebd765b548 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -480,8 +480,7 @@ extern void free_tty_struct(struct tty_struct *tty); extern void initialize_tty_struct(struct tty_struct *tty, struct tty_driver *driver, int idx); extern void deinitialize_tty_struct(struct tty_struct *tty); -extern struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx, - int first_ok); +extern struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx); extern int tty_release(struct inode *inode, struct file *filp); extern int tty_init_termios(struct tty_struct *tty); -- cgit From e9aba5158a80098447ff207a452a3418ae7ee386 Mon Sep 17 00:00:00 2001 From: Konstantin Khlebnikov Date: Thu, 5 Jan 2012 13:06:11 +0400 Subject: tty: rework pty count limiting After adding devpts multiple-insrances sysctl kernel.pty.max limit pty count for each devpts instance independently, while kernel.pty.nr shows total pty count. This patch restores sysctl kernel.pty.max as global limit (4096 by default), adds pty reseve for main devpts (mounted without "newinstance" argument), and new sysctl to tune it: kernel.pty.reserve (1024 by default) Also it adds devpts mount option "max=%d" to limit pty count for each devpts instance independently. (by default NR_UNIX98_PTY_MAX == 2^20) Thus devpts instances in containers cannot eat up all available pty even if we didn't set any limits, while with "max" argument we can adjust limits more precisely. Plus, now open("/dev/ptmx") return -ENOSPC in case lack of pty indexes, this is more informative than -EIO. Signed-off-by: Konstantin Khlebnikov Signed-off-by: Greg Kroah-Hartman --- include/linux/tty.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/tty.h b/include/linux/tty.h index d3ebd765b548..d40774188203 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -52,6 +52,7 @@ * hardcoded at present.) */ #define NR_UNIX98_PTY_DEFAULT 4096 /* Default maximum for Unix98 ptys */ +#define NR_UNIX98_PTY_RESERVE 1024 /* Default reserve for main devpts */ #define NR_UNIX98_PTY_MAX (1 << MINORBITS) /* Absolute limit */ /* -- cgit From 9875bb480cc89d9b690f7028aadf7e58454f0dae Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 24 Jan 2012 13:35:37 -0500 Subject: Eliminate get_driver() and put_driver() Now that there are no users of get_driver() or put_driver(), this patch (as1513) removes those routines completely. Signed-off-by: Alan Stern CC: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- include/linux/device.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/device.h b/include/linux/device.h index a782d7ff9e8b..d28bd8295677 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -238,8 +238,6 @@ struct device_driver { extern int __must_check driver_register(struct device_driver *drv); extern void driver_unregister(struct device_driver *drv); -extern struct device_driver *get_driver(struct device_driver *drv); -extern void put_driver(struct device_driver *drv); extern struct device_driver *driver_find(const char *name, struct bus_type *bus); extern int driver_probe_done(void); -- cgit From 09e9b813d34d9a09d64a64580a9959d8bae1f4f5 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 25 Jan 2012 04:44:20 +0000 Subject: tcp: add LINUX_MIB_TCPRETRANSFAIL counter It might be useful to get a counter of failed tcp_retransmit_skb() calls. Reported-by: Satoru Moriya Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/snmp.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/snmp.h b/include/linux/snmp.h index c1241c428179..8ee8af4e6da9 100644 --- a/include/linux/snmp.h +++ b/include/linux/snmp.h @@ -232,6 +232,7 @@ enum LINUX_MIB_TCPTIMEWAITOVERFLOW, /* TCPTimeWaitOverflow */ LINUX_MIB_TCPREQQFULLDOCOOKIES, /* TCPReqQFullDoCookies */ LINUX_MIB_TCPREQQFULLDROP, /* TCPReqQFullDrop */ + LINUX_MIB_TCPRETRANSFAIL, /* TCPRetransFail */ __LINUX_MIB_MAX }; -- cgit From 3afbd89c9639c344300dcdd7d4e5e18dda559fd4 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Wed, 25 Jan 2012 09:05:04 +0100 Subject: serial/efm32: add new driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Uwe Kleine-König Signed-off-by: Greg Kroah-Hartman --- include/linux/platform_data/efm32-uart.h | 18 ++++++++++++++++++ include/linux/serial_core.h | 2 ++ 2 files changed, 20 insertions(+) create mode 100644 include/linux/platform_data/efm32-uart.h (limited to 'include/linux') diff --git a/include/linux/platform_data/efm32-uart.h b/include/linux/platform_data/efm32-uart.h new file mode 100644 index 000000000000..ed0e975b3c54 --- /dev/null +++ b/include/linux/platform_data/efm32-uart.h @@ -0,0 +1,18 @@ +/* + * + * + */ +#ifndef __LINUX_PLATFORM_DATA_EFM32_UART_H__ +#define __LINUX_PLATFORM_DATA_EFM32_UART_H__ + +#include + +/** + * struct efm32_uart_pdata + * @location: pinmux location for the I/O pins (to be written to the ROUTE + * register) + */ +struct efm32_uart_pdata { + u8 location; +}; +#endif /* ifndef __LINUX_PLATFORM_DATA_EFM32_UART_H__ */ diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index c91ace70c21d..585bfd03d2ee 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -210,6 +210,8 @@ /* Atheros AR933X SoC */ #define PORT_AR933X 99 +/* Energy Micro efm32 SoC */ +#define PORT_EFMUART 100 #ifdef __KERNEL__ -- cgit From 644e9cbbe3fc032cc92d0936057e166a994dc246 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Thu, 26 Jan 2012 00:09:05 +0100 Subject: Add driver auto probing for x86 features v4 There's a growing number of drivers that support a specific x86 feature or CPU. Currently loading these drivers currently on a generic distribution requires various driver specific hacks and it often doesn't work. This patch adds auto probing for drivers based on the x86 cpuid information, in particular based on vendor/family/model number and also based on CPUID feature bits. For example a common issue is not loading the SSE 4.2 accelerated CRC module: this can significantly lower the performance of BTRFS which relies on fast CRC. Another issue is loading the right CPUFREQ driver for the current CPU. Currently distributions often try all all possible driver until one sticks, which is not really a good way to do this. It works with existing udev without any changes. The code exports the x86 information as a generic string in sysfs that can be matched by udev's pattern matching. This scheme does not support numeric ranges, so if you want to handle e.g. ranges of model numbers they have to be encoded in ASCII or simply all models or families listed. Fixing that would require changing udev. Another issue is that udev will happily load all drivers that match, there is currently no nice way to stop a specific driver from being loaded if it's not needed (e.g. if you don't need fast CRC) But there are not that many cpu specific drivers around and they're all not that bloated, so this isn't a particularly serious issue. Originally this patch added the modalias to the normal cpu sysdevs. However sysdevs don't have all the infrastructure needed for udev, so it couldn't really autoload drivers. This patch instead adds the CPU modaliases to the cpuid devices, which are real devices with full support for udev. This implies that the cpuid driver has to be loaded to use this. This patch just adds infrastructure, some driver conversions in followups. Thanks to Kay for helping with some sysfs magic. v2: Constifcation, some updates v4: (trenn@suse.de): - Use kzalloc instead of kmalloc to terminate modalias buffer - Use uppercase hex values to match correctly against hex values containing letters Cc: Dave Jones Cc: Kay Sievers Cc: Jen Axboe Cc: Herbert Xu Cc: Huang Ying Cc: Len Brown Signed-off-by: Andi Kleen Signed-off-by: Thomas Renninger Acked-by: H. Peter Anvin Signed-off-by: Greg Kroah-Hartman --- include/linux/mod_devicetable.h | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h index b29e7f6f8fa5..cff2cc08f45a 100644 --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -571,4 +571,25 @@ struct amba_id { #endif }; +/* + * Match x86 CPUs for CPU specific drivers. + * See documentation of "x86_match_cpu" for details. + */ + +struct x86_cpu_id { + __u16 vendor; + __u16 family; + __u16 model; + __u16 feature; /* bit index */ + kernel_ulong_t driver_data; +}; + +#define X86_FEATURE_MATCH(x) \ + { X86_VENDOR_ANY, X86_FAMILY_ANY, X86_MODEL_ANY, x } + +#define X86_VENDOR_ANY 0xffff +#define X86_FAMILY_ANY 0 +#define X86_MODEL_ANY 0 +#define X86_FEATURE_ANY 0 /* Same as FPU, you can't test for that */ + #endif /* LINUX_MOD_DEVICETABLE_H */ -- cgit From fad12ac8c8c2591c7f4e61d19b6a9d76cd49fafa Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Thu, 26 Jan 2012 00:09:14 +0100 Subject: CPU: Introduce ARCH_HAS_CPU_AUTOPROBE and X86 parts This patch is based on Andi Kleen's work: Implement autoprobing/loading of modules serving CPU specific features (x86cpu autoloading). And Kay Siever's work to get rid of sysdev cpu structures and making use of struct device instead. Before, the cpuid driver had to be loaded to get the x86cpu autoloading feature. With this patch autoloading works through the /sys/devices/system/cpu object Cc: Kay Sievers Cc: Dave Jones Cc: Jens Axboe Cc: Herbert Xu Cc: Huang Ying Cc: Len Brown Acked-by: Andi Kleen Signed-off-by: Thomas Renninger Acked-by: H. Peter Anvin Signed-off-by: Greg Kroah-Hartman --- include/linux/cpu.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/cpu.h b/include/linux/cpu.h index 1f6587590a1a..6e53b4823d7f 100644 --- a/include/linux/cpu.h +++ b/include/linux/cpu.h @@ -44,6 +44,13 @@ extern ssize_t arch_cpu_release(const char *, size_t); #endif struct notifier_block; +#ifdef CONFIG_ARCH_HAS_CPU_AUTOPROBE +extern int arch_cpu_uevent(struct device *dev, struct kobj_uevent_env *env); +extern ssize_t arch_print_cpu_modalias(struct device *dev, + struct device_attribute *attr, + char *bufptr); +#endif + /* * CPU notifier priorities. */ -- cgit From 8357929e6ae3661d5a3a7378a717f29873ea18c6 Mon Sep 17 00:00:00 2001 From: John Stultz Date: Mon, 14 Nov 2011 13:06:21 -0800 Subject: ntp: Cleanup timex.h Move ntp_sycned to ntp.c and mark time_status as static. Also yank function declaration for non-existant function. CC: Thomas Gleixner CC: Eric Dumazet CC: Richard Cochran Signed-off-by: John Stultz --- include/linux/timex.h | 15 --------------- 1 file changed, 15 deletions(-) (limited to 'include/linux') diff --git a/include/linux/timex.h b/include/linux/timex.h index aa60fe7b6ed6..92e01fc31ca6 100644 --- a/include/linux/timex.h +++ b/include/linux/timex.h @@ -234,23 +234,9 @@ struct timex { extern unsigned long tick_usec; /* USER_HZ period (usec) */ extern unsigned long tick_nsec; /* ACTHZ period (nsec) */ -/* - * phase-lock loop variables - */ -extern int time_status; /* clock synchronization status bits */ - extern void ntp_init(void); extern void ntp_clear(void); -/** - * ntp_synced - Returns 1 if the NTP status is not UNSYNC - * - */ -static inline int ntp_synced(void) -{ - return !(time_status & STA_UNSYNC); -} - /* Required to safely shift negative values */ #define shift_right(x, s) ({ \ __typeof__(x) __x = (x); \ @@ -267,7 +253,6 @@ static inline int ntp_synced(void) extern u64 tick_length; extern void second_overflow(void); -extern void update_ntp_one_tick(void); extern int do_adjtimex(struct timex *); extern void hardpps(const struct timespec *, const struct timespec *); -- cgit From ea7cf49a7633c2b70125f59b4e3553d9181cb15d Mon Sep 17 00:00:00 2001 From: John Stultz Date: Mon, 14 Nov 2011 13:18:07 -0800 Subject: ntp: Access tick_length variable via ntp_tick_length() Currently the NTP managed tick_length value is accessed globally, in preparations for locking cleanups, make sure it is accessed via a function and mark it as static. CC: Thomas Gleixner CC: Eric Dumazet CC: Richard Cochran Signed-off-by: John Stultz --- include/linux/timex.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/timex.h b/include/linux/timex.h index 92e01fc31ca6..b75e1864ed19 100644 --- a/include/linux/timex.h +++ b/include/linux/timex.h @@ -250,7 +250,7 @@ extern void ntp_clear(void); #define NTP_INTERVAL_LENGTH (NSEC_PER_SEC/NTP_INTERVAL_FREQ) /* Returns how long ticks are at present, in ns / 2^NTP_SCALE_SHIFT. */ -extern u64 tick_length; +extern u64 ntp_tick_length(void); extern void second_overflow(void); extern int do_adjtimex(struct timex *); -- cgit From efb3040d481a1594592b1defb4526c406c7a4751 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 26 Jan 2012 13:32:15 +0100 Subject: jump_label: Add some documentation akpm figured we could do with a blub explaining what static_branch() is and why it lives... Grumpily-requested-by: Andrew Morton Cc: Jason Baron Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/n/tip-h02wu6kabpoojxf03wke704k@git.kernel.org Signed-off-by: Ingo Molnar --- include/linux/jump_label.h | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) (limited to 'include/linux') diff --git a/include/linux/jump_label.h b/include/linux/jump_label.h index 5ce8b140428f..f7c69580fea7 100644 --- a/include/linux/jump_label.h +++ b/include/linux/jump_label.h @@ -1,6 +1,38 @@ #ifndef _LINUX_JUMP_LABEL_H #define _LINUX_JUMP_LABEL_H +/* + * Jump label support + * + * Copyright (C) 2009-2012 Jason Baron + * Copyright (C) 2011-2012 Peter Zijlstra + * + * Jump labels provide an interface to generate dynamic branches using + * self-modifying code. Assuming toolchain and architecture support the result + * of a "if (static_branch(&key))" statement is a unconditional branch (which + * defaults to false - and the true block is placed out of line). + * + * However at runtime we can change the 'static' branch target using + * jump_label_{inc,dec}(). These function as a 'reference' count on the key + * object and for as long as there are references all branches referring to + * that particular key will point to the (out of line) true block. + * + * Since this relies on modifying code the jump_label_{inc,dec}() functions + * must be considered absolute slow paths (machine wide synchronization etc.). + * OTOH, since the affected branches are unconditional their runtime overhead + * will be absolutely minimal, esp. in the default (off) case where the total + * effect is a single NOP of appropriate size. The on case will patch in a jump + * to the out-of-line block. + * + * When the control is directly exposed to userspace it is prudent to delay the + * decrement to avoid high frequency code modifications which can (and do) + * cause significant performance degradation. Struct jump_label_key_deferred and + * jump_label_dec_deferred() provide for this. + * + * Lacking toolchain and or architecture support, it falls back to a simple + * conditional branch. + */ + #include #include #include -- cgit From 39be350127ec60a078edffe5b4915dafba4ba514 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 26 Jan 2012 12:44:34 +0100 Subject: sched, block: Unify cache detection The block layer has some code trying to determine if two CPUs share a cache, the scheduler has a similar function. Expose the function used by the scheduler and make the block layer use it, thereby removing the block layers usage of CONFIG_SCHED* and topology bits. Signed-off-by: Peter Zijlstra Acked-by: Jens Axboe Link: http://lkml.kernel.org/r/1327579450.2446.95.camel@twins --- include/linux/sched.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index 513f52459872..0e1959568836 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1052,6 +1052,8 @@ static inline int test_sd_parent(struct sched_domain *sd, int flag) unsigned long default_scale_freq_power(struct sched_domain *sd, int cpu); unsigned long default_scale_smt_power(struct sched_domain *sd, int cpu); +bool cpus_share_cache(int this_cpu, int that_cpu); + #else /* CONFIG_SMP */ struct sched_domain_attr; @@ -1061,6 +1063,12 @@ partition_sched_domains(int ndoms_new, cpumask_var_t doms_new[], struct sched_domain_attr *dattr_new) { } + +static inline bool cpus_share_cache(int this_cpu, int that_cpu) +{ + return true; +} + #endif /* !CONFIG_SMP */ -- cgit From 4ec4412e1e91f44a3dcb97b6c9172a13fc78bac9 Mon Sep 17 00:00:00 2001 From: Vincent Guittot Date: Mon, 12 Dec 2011 20:21:08 +0100 Subject: sched: Ensure cpu_power periodic update With a lot of small tasks, the softirq sched is nearly never called when no_hz is enabled. In this case load_balance() is mainly called with the newly_idle mode which doesn't update the cpu_power. Add a next_update field which ensure a maximum update period when there is short activity. Having stale cpu_power information can skew the load-balancing decisions, this is cured by the guaranteed update. Signed-off-by: Vincent Guittot Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1323717668-2143-1-git-send-email-vincent.guittot@linaro.org --- include/linux/sched.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index 0e1959568836..92313a3f6f77 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -905,6 +905,7 @@ struct sched_group_power { * single CPU. */ unsigned int power, power_orig; + unsigned long next_update; /* * Number of busy cpus in this group. */ -- cgit From 94f9065648a2645b28187b44ec7778c30cf58758 Mon Sep 17 00:00:00 2001 From: Chun-Yeow Yeoh Date: Sat, 21 Jan 2012 01:02:16 +0800 Subject: {nl,cfg,mac}80211: Add support of setting non-forwarding entity in Mesh A mesh node that joins the mesh network is by default a forwarding entity. This patch allows the mesh node to set as non-forwarding entity. Whenever dot11MeshForwarding is set to 0, the mesh node can prevent itself from forwarding the traffic which is not destined to him. Signed-off-by: Chun-Yeow Yeoh Signed-off-by: John W. Linville --- include/linux/nl80211.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 0f5ff3739820..4f98fae13307 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -2104,6 +2104,9 @@ enum nl80211_mntr_flags { * TUs) during which a mesh STA can send only one Action frame containing a * PERR element. * + * @NL80211_MESHCONF_FORWARDING: set Mesh STA as forwarding or non-forwarding + * or forwarding entity (default is TRUE - forwarding entity) + * * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute * * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use @@ -2128,6 +2131,7 @@ enum nl80211_meshconf_params { NL80211_MESHCONF_HWMP_RANN_INTERVAL, NL80211_MESHCONF_GATE_ANNOUNCEMENTS, NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL, + NL80211_MESHCONF_FORWARDING, /* keep last */ __NL80211_MESHCONF_ATTR_AFTER_LAST, -- cgit From a46621a3a8f24557201a7ef62de151c812f8985c Mon Sep 17 00:00:00 2001 From: Denys Vlasenko Date: Mon, 30 Jan 2012 15:22:06 -0500 Subject: net: Deinline __nlmsg_put and genlmsg_put. -7k code on i386 defconfig. text data bss dec hex filename 8455963 532732 1810804 10799499 a4c98b vmlinux.o.before 8448899 532732 1810804 10792435 a4adf3 vmlinux.o This change also removes commented-out copy of __nlmsg_put which was last touched in 2005 with "Enable once all users have been converted" comment on top. Changes in v2: rediffed against net-next. Signed-off-by: Denys Vlasenko Signed-off-by: David S. Miller --- include/linux/netlink.h | 18 ++---------------- 1 file changed, 2 insertions(+), 16 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netlink.h b/include/linux/netlink.h index 52e48959cfa1..a390e9d54827 100644 --- a/include/linux/netlink.h +++ b/include/linux/netlink.h @@ -237,22 +237,8 @@ struct netlink_notify { int protocol; }; -static __inline__ struct nlmsghdr * -__nlmsg_put(struct sk_buff *skb, u32 pid, u32 seq, int type, int len, int flags) -{ - struct nlmsghdr *nlh; - int size = NLMSG_LENGTH(len); - - nlh = (struct nlmsghdr*)skb_put(skb, NLMSG_ALIGN(size)); - nlh->nlmsg_type = type; - nlh->nlmsg_len = size; - nlh->nlmsg_flags = flags; - nlh->nlmsg_pid = pid; - nlh->nlmsg_seq = seq; - if (!__builtin_constant_p(size) || NLMSG_ALIGN(size) - size != 0) - memset(NLMSG_DATA(nlh) + len, 0, NLMSG_ALIGN(size) - size); - return nlh; -} +struct nlmsghdr * +__nlmsg_put(struct sk_buff *skb, u32 pid, u32 seq, int type, int len, int flags); #define NLMSG_NEW(skb, pid, seq, type, len, flags) \ ({ if (unlikely(skb_tailroom(skb) < (int)NLMSG_SPACE(len))) \ -- cgit From 24db78c05b1e3ccb5a78aedd17aa1008c91dab5a Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Sat, 28 Jan 2012 17:25:32 +0100 Subject: nl80211: add support for mcs masks Allow to set mcs masks through nl80211. We also allow to set MCS rates but no legacy rates (and vice versa). Signed-off-by: Simon Wunderlich Signed-off-by: Mathias Kretschmer Signed-off-by: John W. Linville --- include/linux/nl80211.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 4f98fae13307..ad56e21a9f10 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -1475,6 +1475,7 @@ enum nl80211_attrs { #define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS #define NL80211_MAX_SUPP_RATES 32 +#define NL80211_MAX_SUPP_HT_RATES 77 #define NL80211_MAX_SUPP_REG_RULES 32 #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0 #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16 @@ -2405,12 +2406,15 @@ enum nl80211_key_attributes { * in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with * 1 = 500 kbps) but without the IE length restriction (at most * %NL80211_MAX_SUPP_RATES in a single array). + * @NL80211_TXRATE_MCS: HT (MCS) rates allowed for TX rate selection + * in an array of MCS numbers. * @__NL80211_TXRATE_AFTER_LAST: internal * @NL80211_TXRATE_MAX: highest TX rate attribute */ enum nl80211_tx_rate_attributes { __NL80211_TXRATE_INVALID, NL80211_TXRATE_LEGACY, + NL80211_TXRATE_MCS, /* keep last */ __NL80211_TXRATE_AFTER_LAST, -- cgit From a915da9b69273815527ccb3789421cb7027b545b Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 31 Jan 2012 05:18:33 +0000 Subject: tcp: md5: rcu conversion In order to be able to support proper RST messages for TCP MD5 flows, we need to allow access to MD5 keys without locking listener socket. This conversion is a nice cleanup, and shrinks size of timewait sockets by 80 bytes. IPv6 code reuses generic code found in IPv4 instead of duplicating it. Control path uses GFP_KERNEL allocations instead of GFP_ATOMIC. Signed-off-by: Eric Dumazet Cc: Shawn Lu Signed-off-by: David S. Miller --- include/linux/tcp.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/tcp.h b/include/linux/tcp.h index 46a85c9e1f25..c2025f159641 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -486,8 +486,7 @@ struct tcp_timewait_sock { u32 tw_ts_recent; long tw_ts_recent_stamp; #ifdef CONFIG_TCP_MD5SIG - u16 tw_md5_keylen; - u8 tw_md5_key[TCP_MD5SIG_MAXKEYLEN]; + struct tcp_md5sig_key *tw_md5_key; #endif /* Few sockets in timewait have cookies; in that case, then this * object holds a reference to them (tw_cookie_values->kref). -- cgit From a8afca032998850ec63e83d555cdcf0eb5680cd6 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 31 Jan 2012 18:45:40 +0000 Subject: tcp: md5: protects md5sig_info with RCU This patch makes sure we use appropriate memory barriers before publishing tp->md5sig_info, allowing tcp_md5_do_lookup() being used from tcp_v4_send_reset() without holding socket lock (upcoming patch from Shawn Lu) Note we also need to respect rcu grace period before its freeing, since we can free socket without this grace period thanks to SLAB_DESTROY_BY_RCU Signed-off-by: Eric Dumazet Cc: Shawn Lu Signed-off-by: David S. Miller --- include/linux/tcp.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/tcp.h b/include/linux/tcp.h index c2025f159641..115389e9b945 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -463,7 +463,7 @@ struct tcp_sock { const struct tcp_sock_af_ops *af_specific; /* TCP MD5 Signature Option information */ - struct tcp_md5sig_info *md5sig_info; + struct tcp_md5sig_info __rcu *md5sig_info; #endif /* When the cookie options are generated and exchanged, then this -- cgit From c7f798e3722610d486e951f04bbc00b6ba124d62 Mon Sep 17 00:00:00 2001 From: Yong Zhang Date: Thu, 1 Dec 2011 11:25:59 -0800 Subject: clocksource: Get rid of clocksource_calc_mult_shift() No one is using this, so encourage the use of clocksource_register_hz/khz(), and drop this helper. Cc: Thomas Gleixner Signed-off-by: Yong Zhang [jstultz: tweaked commit message] Signed-off-by: John Stultz --- include/linux/clocksource.h | 7 ------- 1 file changed, 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h index 081147da0564..fbe89e17124e 100644 --- a/include/linux/clocksource.h +++ b/include/linux/clocksource.h @@ -319,13 +319,6 @@ static inline void __clocksource_updatefreq_khz(struct clocksource *cs, u32 khz) __clocksource_updatefreq_scale(cs, 1000, khz); } -static inline void -clocksource_calc_mult_shift(struct clocksource *cs, u32 freq, u32 minsec) -{ - return clocks_calc_mult_shift(&cs->mult, &cs->shift, freq, - NSEC_PER_SEC, minsec); -} - #ifdef CONFIG_GENERIC_TIME_VSYSCALL extern void update_vsyscall(struct timespec *ts, struct timespec *wtm, -- cgit From 761b3ef50e1c2649cffbfa67a4dcb2dcdb7982ed Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 31 Jan 2012 13:47:36 +0800 Subject: cgroup: remove cgroup_subsys argument from callbacks The argument is not used at all, and it's not necessary, because a specific callback handler of course knows which subsys it belongs to. Now only ->pupulate() takes this argument, because the handlers of this callback always call cgroup_add_file()/cgroup_add_files(). So we reduce a few lines of code, though the shrinking of object size is minimal. 16 files changed, 113 insertions(+), 162 deletions(-) text data bss dec hex filename 5486240 656987 7039960 13183187 c928d3 vmlinux.o.orig 5486170 656987 7039960 13183117 c9288d vmlinux.o Signed-off-by: Li Zefan Signed-off-by: Tejun Heo --- include/linux/cgroup.h | 29 ++++++++++++----------------- 1 file changed, 12 insertions(+), 17 deletions(-) (limited to 'include/linux') diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h index 7da3e745b74c..501adb1b2f43 100644 --- a/include/linux/cgroup.h +++ b/include/linux/cgroup.h @@ -452,23 +452,18 @@ int cgroup_taskset_size(struct cgroup_taskset *tset); */ struct cgroup_subsys { - struct cgroup_subsys_state *(*create)(struct cgroup_subsys *ss, - struct cgroup *cgrp); - int (*pre_destroy)(struct cgroup_subsys *ss, struct cgroup *cgrp); - void (*destroy)(struct cgroup_subsys *ss, struct cgroup *cgrp); - int (*can_attach)(struct cgroup_subsys *ss, struct cgroup *cgrp, - struct cgroup_taskset *tset); - void (*cancel_attach)(struct cgroup_subsys *ss, struct cgroup *cgrp, - struct cgroup_taskset *tset); - void (*attach)(struct cgroup_subsys *ss, struct cgroup *cgrp, - struct cgroup_taskset *tset); - void (*fork)(struct cgroup_subsys *ss, struct task_struct *task); - void (*exit)(struct cgroup_subsys *ss, struct cgroup *cgrp, - struct cgroup *old_cgrp, struct task_struct *task); - int (*populate)(struct cgroup_subsys *ss, - struct cgroup *cgrp); - void (*post_clone)(struct cgroup_subsys *ss, struct cgroup *cgrp); - void (*bind)(struct cgroup_subsys *ss, struct cgroup *root); + struct cgroup_subsys_state *(*create)(struct cgroup *cgrp); + int (*pre_destroy)(struct cgroup *cgrp); + void (*destroy)(struct cgroup *cgrp); + int (*can_attach)(struct cgroup *cgrp, struct cgroup_taskset *tset); + void (*cancel_attach)(struct cgroup *cgrp, struct cgroup_taskset *tset); + void (*attach)(struct cgroup *cgrp, struct cgroup_taskset *tset); + void (*fork)(struct task_struct *task); + void (*exit)(struct cgroup *cgrp, struct cgroup *old_cgrp, + struct task_struct *task); + int (*populate)(struct cgroup_subsys *ss, struct cgroup *cgrp); + void (*post_clone)(struct cgroup *cgrp); + void (*bind)(struct cgroup *root); int subsys_id; int active; -- cgit From 348748b0e8cccc675e2f3a1456460ffcd540e1a1 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Wed, 11 Jan 2012 12:45:56 +0100 Subject: usb/uas: move UAS structs / defines into a header file The protocol specific structures and defines which are used by UAS are moved into a header files by this patch so it can be accessed by the UAS gadget as well. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Sarah Sharp --- include/linux/usb/uas.h | 61 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 61 insertions(+) create mode 100644 include/linux/usb/uas.h (limited to 'include/linux') diff --git a/include/linux/usb/uas.h b/include/linux/usb/uas.h new file mode 100644 index 000000000000..856be7fcbbd8 --- /dev/null +++ b/include/linux/usb/uas.h @@ -0,0 +1,61 @@ +#ifndef __USB_UAS_H__ +#define __USB_UAS_H__ + +#include +#include + +/* Common header for all IUs */ +struct iu { + __u8 iu_id; + __u8 rsvd1; + __be16 tag; +}; + +enum { + IU_ID_COMMAND = 0x01, + IU_ID_STATUS = 0x03, + IU_ID_RESPONSE = 0x04, + IU_ID_TASK_MGMT = 0x05, + IU_ID_READ_READY = 0x06, + IU_ID_WRITE_READY = 0x07, +}; + +struct command_iu { + __u8 iu_id; + __u8 rsvd1; + __be16 tag; + __u8 prio_attr; + __u8 rsvd5; + __u8 len; + __u8 rsvd7; + struct scsi_lun lun; + __u8 cdb[16]; /* XXX: Overflow-checking tools may misunderstand */ +}; + +/* + * Also used for the Read Ready and Write Ready IUs since they have the + * same first four bytes + */ +struct sense_iu { + __u8 iu_id; + __u8 rsvd1; + __be16 tag; + __be16 status_qual; + __u8 status; + __u8 rsvd7[7]; + __be16 len; + __u8 sense[SCSI_SENSE_BUFFERSIZE]; +}; + +enum { + CMD_PIPE_ID = 1, + STATUS_PIPE_ID = 2, + DATA_IN_PIPE_ID = 3, + DATA_OUT_PIPE_ID = 4, + + UAS_SIMPLE_TAG = 0, + UAS_HEAD_TAG = 1, + UAS_ORDERED_TAG = 2, + UAS_ACA = 4, +}; +#endif -- cgit From ee398b59ec1dc3ce1d60518f4ea644907893414b Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Wed, 11 Jan 2012 12:45:57 +0100 Subject: usb/uas: add usb_pipe_usage_descriptor usb_pipe_usage_descriptor defines the struct which is used to describe the type of the endpoint in UAS (status/command/data in+out). It will be used by the UAS gadget, the host code is using a char array for the access. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Sarah Sharp --- include/linux/usb/uas.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb/uas.h b/include/linux/usb/uas.h index 856be7fcbbd8..9a988e413694 100644 --- a/include/linux/usb/uas.h +++ b/include/linux/usb/uas.h @@ -47,6 +47,14 @@ struct sense_iu { __u8 sense[SCSI_SENSE_BUFFERSIZE]; }; +struct usb_pipe_usage_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bPipeID; + __u8 Reserved; +} __attribute__((__packed__)); + enum { CMD_PIPE_ID = 1, STATUS_PIPE_ID = 2, -- cgit From 66d450e84ec656ec4b774c41cd8d46b3e48d51df Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 30 Jan 2012 21:14:28 +0100 Subject: TTY: provide tty_standard_install helper There are currently many cut&paste copies of what tty_driver_install_tty does when custom ->install method is not provided. Let's get rid of the copies and create a helper with this setup code. Signed-off-by: Jiri Slaby Cc: Havard Skinnemoen Acked-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- include/linux/tty.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/tty.h b/include/linux/tty.h index d40774188203..a91ff403b3bf 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -484,6 +484,8 @@ extern void deinitialize_tty_struct(struct tty_struct *tty); extern struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx); extern int tty_release(struct inode *inode, struct file *filp); extern int tty_init_termios(struct tty_struct *tty); +extern int tty_standard_install(struct tty_driver *driver, + struct tty_struct *tty); extern struct tty_struct *tty_pair_get_tty(struct tty_struct *tty); extern struct tty_struct *tty_pair_get_pty(struct tty_struct *tty); -- cgit From 4f03a2c934894f30a64d397df8c7c4de129c5b30 Mon Sep 17 00:00:00 2001 From: "K. Y. Srinivasan" Date: Fri, 27 Jan 2012 15:55:57 -0800 Subject: drivers: hv: kvp: Add/cleanup connector defines The current KVP code carries some private connector related defines. Update connector.h to have all the KVP defines. As part of this patch get rid of some unused defines. Signed-off-by: K. Y. Srinivasan Signed-off-by: Haiyang Zhang Signed-off-by: Greg Kroah-Hartman --- include/linux/connector.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/connector.h b/include/linux/connector.h index 3c9c54fd5690..76384074262d 100644 --- a/include/linux/connector.h +++ b/include/linux/connector.h @@ -43,6 +43,7 @@ #define CN_IDX_DRBD 0x8 #define CN_VAL_DRBD 0x1 #define CN_KVP_IDX 0x9 /* HyperV KVP */ +#define CN_KVP_VAL 0x1 /* queries from the kernel */ #define CN_NETLINK_USERS 10 /* Highest index + 1 */ -- cgit From 2939437ce8f2de07237eb2bcce29b6a699bfe799 Mon Sep 17 00:00:00 2001 From: "K. Y. Srinivasan" Date: Fri, 27 Jan 2012 15:55:58 -0800 Subject: drivers: hv: kvp: Move the contents of hv_kvp.h to hyperv.h In preparation for consolidating all KVP related defines into a single header file that both the kernel and user level components can use, move the contents of hv_kvp.h into hyperv.h. Signed-off-by: K. Y. Srinivasan Signed-off-by: Haiyang Zhang Signed-off-by: Greg Kroah-Hartman --- include/linux/hyperv.h | 165 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 165 insertions(+) (limited to 'include/linux') diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index 62b908e0e591..7332b3faecc8 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -25,6 +25,166 @@ #ifndef _HYPERV_H #define _HYPERV_H +#include + +/* + * An implementation of HyperV key value pair (KVP) functionality for Linux. + * + * + * Copyright (C) 2010, Novell, Inc. + * Author : K. Y. Srinivasan + * + */ + +/* + * Maximum value size - used for both key names and value data, and includes + * any applicable NULL terminators. + * + * Note: This limit is somewhat arbitrary, but falls easily within what is + * supported for all native guests (back to Win 2000) and what is reasonable + * for the IC KVP exchange functionality. Note that Windows Me/98/95 are + * limited to 255 character key names. + * + * MSDN recommends not storing data values larger than 2048 bytes in the + * registry. + * + * Note: This value is used in defining the KVP exchange message - this value + * cannot be modified without affecting the message size and compatibility. + */ + +/* + * bytes, including any null terminators + */ +#define HV_KVP_EXCHANGE_MAX_VALUE_SIZE (2048) + + +/* + * Maximum key size - the registry limit for the length of an entry name + * is 256 characters, including the null terminator + */ + +#define HV_KVP_EXCHANGE_MAX_KEY_SIZE (512) + +/* + * In Linux, we implement the KVP functionality in two components: + * 1) The kernel component which is packaged as part of the hv_utils driver + * is responsible for communicating with the host and responsible for + * implementing the host/guest protocol. 2) A user level daemon that is + * responsible for data gathering. + * + * Host/Guest Protocol: The host iterates over an index and expects the guest + * to assign a key name to the index and also return the value corresponding to + * the key. The host will have atmost one KVP transaction outstanding at any + * given point in time. The host side iteration stops when the guest returns + * an error. Microsoft has specified the following mapping of key names to + * host specified index: + * + * Index Key Name + * 0 FullyQualifiedDomainName + * 1 IntegrationServicesVersion + * 2 NetworkAddressIPv4 + * 3 NetworkAddressIPv6 + * 4 OSBuildNumber + * 5 OSName + * 6 OSMajorVersion + * 7 OSMinorVersion + * 8 OSVersion + * 9 ProcessorArchitecture + * + * The Windows host expects the Key Name and Key Value to be encoded in utf16. + * + * Guest Kernel/KVP Daemon Protocol: As noted earlier, we implement all of the + * data gathering functionality in a user mode daemon. The user level daemon + * is also responsible for binding the key name to the index as well. The + * kernel and user-level daemon communicate using a connector channel. + * + * The user mode component first registers with the + * the kernel component. Subsequently, the kernel component requests, data + * for the specified keys. In response to this message the user mode component + * fills in the value corresponding to the specified key. We overload the + * sequence field in the cn_msg header to define our KVP message types. + * + * + * The kernel component simply acts as a conduit for communication between the + * Windows host and the user-level daemon. The kernel component passes up the + * index received from the Host to the user-level daemon. If the index is + * valid (supported), the corresponding key as well as its + * value (both are strings) is returned. If the index is invalid + * (not supported), a NULL key string is returned. + */ + +/* + * + * The following definitions are shared with the user-mode component; do not + * change any of this without making the corresponding changes in + * the KVP user-mode component. + */ + +enum hv_ku_op { + KVP_REGISTER = 0, /* Register the user mode component */ + KVP_KERNEL_GET, /* Kernel is requesting the value */ + KVP_KERNEL_SET, /* Kernel is providing the value */ + KVP_USER_GET, /* User is requesting the value */ + KVP_USER_SET /* User is providing the value */ +}; + +struct hv_ku_msg { + __u32 kvp_index; /* Key index */ + __u8 kvp_key[HV_KVP_EXCHANGE_MAX_KEY_SIZE]; /* Key name */ + __u8 kvp_value[HV_KVP_EXCHANGE_MAX_VALUE_SIZE]; /* Key value */ +}; + + + + +#ifdef __KERNEL__ + +/* + * Registry value types. + */ + +#define REG_SZ 1 + +enum hv_kvp_exchg_op { + KVP_OP_GET = 0, + KVP_OP_SET, + KVP_OP_DELETE, + KVP_OP_ENUMERATE, + KVP_OP_COUNT /* Number of operations, must be last. */ +}; + +enum hv_kvp_exchg_pool { + KVP_POOL_EXTERNAL = 0, + KVP_POOL_GUEST, + KVP_POOL_AUTO, + KVP_POOL_AUTO_EXTERNAL, + KVP_POOL_AUTO_INTERNAL, + KVP_POOL_COUNT /* Number of pools, must be last. */ +}; + +struct hv_kvp_hdr { + u8 operation; + u8 pool; +}; + +struct hv_kvp_exchg_msg_value { + u32 value_type; + u32 key_size; + u32 value_size; + u8 key[HV_KVP_EXCHANGE_MAX_KEY_SIZE]; + u8 value[HV_KVP_EXCHANGE_MAX_VALUE_SIZE]; +}; + +struct hv_kvp_msg_enumerate { + u32 index; + struct hv_kvp_exchg_msg_value data; +}; + +struct hv_kvp_msg { + struct hv_kvp_hdr kvp_hdr; + struct hv_kvp_msg_enumerate kvp_data; +}; + #include #include #include @@ -870,4 +1030,9 @@ struct hyperv_service_callback { extern void vmbus_prep_negotiate_resp(struct icmsg_hdr *, struct icmsg_negotiate *, u8 *); +int hv_kvp_init(struct hv_util_service *); +void hv_kvp_deinit(void); +void hv_kvp_onchannelcallback(void *); + +#endif /* __KERNEL__ */ #endif /* _HYPERV_H */ -- cgit From cf5046b309b3a05c444a8edba6b44108510b7d7d Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Mon, 10 Oct 2011 23:43:53 +0200 Subject: can: dev: let can_get_echo_skb() return dlc of CAN frame can_get_echo_skb() is usually called in the TX complete handler. The stats->tx_packets and stats->tx_bytes should be updated there, too. This patch simplifies to figure out the size of the sent CAN frame. Signed-off-by: Marc Kleine-Budde --- include/linux/can/dev.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h index a0969fcb72b9..5d2efe7e3f1b 100644 --- a/include/linux/can/dev.h +++ b/include/linux/can/dev.h @@ -92,7 +92,7 @@ void can_bus_off(struct net_device *dev); void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev, unsigned int idx); -void can_get_echo_skb(struct net_device *dev, unsigned int idx); +unsigned int can_get_echo_skb(struct net_device *dev, unsigned int idx); void can_free_echo_skb(struct net_device *dev, unsigned int idx); struct sk_buff *alloc_can_skb(struct net_device *dev, struct can_frame **cf); -- cgit From ac483c446b67870444c9eeaf8325d3d2af9b91bc Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Mon, 2 Jan 2012 10:04:14 +0100 Subject: ftrace: Change filter/notrace set functions to return exit code Currently the ftrace_set_filter and ftrace_set_notrace functions do not return any return code. So there's no way for ftrace_ops user to tell wether the filter was correctly applied. The set_ftrace_filter interface returns error in case the filter did not match: # echo krava > set_ftrace_filter bash: echo: write error: Invalid argument Changing both ftrace_set_filter and ftrace_set_notrace functions to return zero if the filter was applied correctly or -E* values in case of error. Link: http://lkml.kernel.org/r/1325495060-6402-2-git-send-email-jolsa@redhat.com Acked-by: Frederic Weisbecker Signed-off-by: Jiri Olsa Signed-off-by: Steven Rostedt --- include/linux/ftrace.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index 028e26f0bf08..f33fb3b041c6 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -178,9 +178,9 @@ struct dyn_ftrace { }; int ftrace_force_update(void); -void ftrace_set_filter(struct ftrace_ops *ops, unsigned char *buf, +int ftrace_set_filter(struct ftrace_ops *ops, unsigned char *buf, int len, int reset); -void ftrace_set_notrace(struct ftrace_ops *ops, unsigned char *buf, +int ftrace_set_notrace(struct ftrace_ops *ops, unsigned char *buf, int len, int reset); void ftrace_set_global_filter(unsigned char *buf, int len, int reset); void ftrace_set_global_notrace(unsigned char *buf, int len, int reset); -- cgit From f069686e4bdc60a637d210ea3eea25fcdb82df88 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 25 Jan 2012 20:18:55 -0500 Subject: tracing/softirq: Move __raise_softirq_irqoff() out of header The __raise_softirq_irqoff() contains a tracepoint. As tracepoints in headers can cause issues, and not to mention, bloats the kernel when they are in a static inline, it is best to move the function that contains the tracepoint out of the header and into softirq.c. Link: http://lkml.kernel.org/r/20120118120711.GB14863@elte.hu Suggested-by: Ingo Molnar Signed-off-by: Steven Rostedt --- include/linux/interrupt.h | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index a64b00e286f5..3f830e005118 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -20,7 +20,6 @@ #include #include #include -#include /* * These correspond to the IORESOURCE_IRQ_* defines in @@ -456,11 +455,7 @@ asmlinkage void do_softirq(void); asmlinkage void __do_softirq(void); extern void open_softirq(int nr, void (*action)(struct softirq_action *)); extern void softirq_init(void); -static inline void __raise_softirq_irqoff(unsigned int nr) -{ - trace_softirq_raise(nr); - or_softirq_pending(1UL << nr); -} +extern void __raise_softirq_irqoff(unsigned int nr); extern void raise_softirq_irqoff(unsigned int nr); extern void raise_softirq(unsigned int nr); -- cgit From 5f2d6171e1e70584b9819771443485750453fd16 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Tue, 31 Jan 2012 00:03:31 +0100 Subject: bcma: add the core unit number Some SoCs have two pcie or gmac cores and we need to know the number of the specific core on the bus. This is the case for the BCM4706. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville --- include/linux/bcma/bcma.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h index 83c209f39493..024a6e2a9083 100644 --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -136,6 +136,7 @@ struct bcma_device { bool dev_registered; u8 core_index; + u8 core_unit; u32 addr; u32 wrap; -- cgit From 2be25cac8402fab56bb51166f464d1b420bcf744 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Tue, 31 Jan 2012 00:03:32 +0100 Subject: bcma: add constants for PCI and use them There are many magic numbers used in the PCIe code. Replace them with some constants from the Broadcom SDK and also use them in the pcie host controller. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville --- include/linux/bcma/bcma_driver_pci.h | 85 ++++++++++++++++++++++++++++++++++++ 1 file changed, 85 insertions(+) (limited to 'include/linux') diff --git a/include/linux/bcma/bcma_driver_pci.h b/include/linux/bcma/bcma_driver_pci.h index 3871b668caf9..67ea7beff9f3 100644 --- a/include/linux/bcma/bcma_driver_pci.h +++ b/include/linux/bcma/bcma_driver_pci.h @@ -53,6 +53,35 @@ struct pci_dev; #define BCMA_CORE_PCI_SBTOPCI1_MASK 0xFC000000 #define BCMA_CORE_PCI_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */ #define BCMA_CORE_PCI_SBTOPCI2_MASK 0xC0000000 +#define BCMA_CORE_PCI_CONFIG_ADDR 0x0120 /* pcie config space access */ +#define BCMA_CORE_PCI_CONFIG_DATA 0x0124 /* pcie config space access */ +#define BCMA_CORE_PCI_MDIO_CONTROL 0x0128 /* controls the mdio access */ +#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_MASK 0x7f /* clock to be used on MDIO */ +#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL 0x2 +#define BCMA_CORE_PCI_MDIOCTL_PREAM_EN 0x80 /* Enable preamble sequnce */ +#define BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE 0x100 /* Tranaction complete */ +#define BCMA_CORE_PCI_MDIO_DATA 0x012c /* Data to the mdio access */ +#define BCMA_CORE_PCI_MDIODATA_MASK 0x0000ffff /* data 2 bytes */ +#define BCMA_CORE_PCI_MDIODATA_TA 0x00020000 /* Turnaround */ +#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD 18 /* Regaddr shift (rev < 10) */ +#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK_OLD 0x003c0000 /* Regaddr Mask (rev < 10) */ +#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD 22 /* Physmedia devaddr shift (rev < 10) */ +#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK_OLD 0x0fc00000 /* Physmedia devaddr Mask (rev < 10) */ +#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF 18 /* Regaddr shift */ +#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK 0x007c0000 /* Regaddr Mask */ +#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF 23 /* Physmedia devaddr shift */ +#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK 0x0f800000 /* Physmedia devaddr Mask */ +#define BCMA_CORE_PCI_MDIODATA_WRITE 0x10000000 /* write Transaction */ +#define BCMA_CORE_PCI_MDIODATA_READ 0x20000000 /* Read Transaction */ +#define BCMA_CORE_PCI_MDIODATA_START 0x40000000 /* start of Transaction */ +#define BCMA_CORE_PCI_MDIODATA_DEV_ADDR 0x0 /* dev address for serdes */ +#define BCMA_CORE_PCI_MDIODATA_BLK_ADDR 0x1F /* blk address for serdes */ +#define BCMA_CORE_PCI_MDIODATA_DEV_PLL 0x1d /* SERDES PLL Dev */ +#define BCMA_CORE_PCI_MDIODATA_DEV_TX 0x1e /* SERDES TX Dev */ +#define BCMA_CORE_PCI_MDIODATA_DEV_RX 0x1f /* SERDES RX Dev */ +#define BCMA_CORE_PCI_PCIEIND_ADDR 0x0130 /* indirect access to the internal register */ +#define BCMA_CORE_PCI_PCIEIND_DATA 0x0134 /* Data to/from the internal regsiter */ +#define BCMA_CORE_PCI_CLKREQENCTRL 0x0138 /* >= rev 6, Clkreq rdma control */ #define BCMA_CORE_PCI_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */ #define BCMA_CORE_PCI_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */ #define BCMA_CORE_PCI_PCICFG2 0x0600 /* PCI config space 2 (rev >= 8) */ @@ -72,6 +101,62 @@ struct pci_dev; #define BCMA_CORE_PCI_SBTOPCI_RC_READL 0x00000010 /* Memory read line */ #define BCMA_CORE_PCI_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */ +/* PCIE protocol PHY diagnostic registers */ +#define BCMA_CORE_PCI_PLP_MODEREG 0x200 /* Mode */ +#define BCMA_CORE_PCI_PLP_STATUSREG 0x204 /* Status */ +#define BCMA_CORE_PCI_PLP_POLARITYINV_STAT 0x10 /* Status reg PCIE_PLP_STATUSREG */ +#define BCMA_CORE_PCI_PLP_LTSSMCTRLREG 0x208 /* LTSSM control */ +#define BCMA_CORE_PCI_PLP_LTLINKNUMREG 0x20c /* Link Training Link number */ +#define BCMA_CORE_PCI_PLP_LTLANENUMREG 0x210 /* Link Training Lane number */ +#define BCMA_CORE_PCI_PLP_LTNFTSREG 0x214 /* Link Training N_FTS */ +#define BCMA_CORE_PCI_PLP_ATTNREG 0x218 /* Attention */ +#define BCMA_CORE_PCI_PLP_ATTNMASKREG 0x21C /* Attention Mask */ +#define BCMA_CORE_PCI_PLP_RXERRCTR 0x220 /* Rx Error */ +#define BCMA_CORE_PCI_PLP_RXFRMERRCTR 0x224 /* Rx Framing Error */ +#define BCMA_CORE_PCI_PLP_RXERRTHRESHREG 0x228 /* Rx Error threshold */ +#define BCMA_CORE_PCI_PLP_TESTCTRLREG 0x22C /* Test Control reg */ +#define BCMA_CORE_PCI_PLP_SERDESCTRLOVRDREG 0x230 /* SERDES Control Override */ +#define BCMA_CORE_PCI_PLP_TIMINGOVRDREG 0x234 /* Timing param override */ +#define BCMA_CORE_PCI_PLP_RXTXSMDIAGREG 0x238 /* RXTX State Machine Diag */ +#define BCMA_CORE_PCI_PLP_LTSSMDIAGREG 0x23C /* LTSSM State Machine Diag */ + +/* PCIE protocol DLLP diagnostic registers */ +#define BCMA_CORE_PCI_DLLP_LCREG 0x100 /* Link Control */ +#define BCMA_CORE_PCI_DLLP_LSREG 0x104 /* Link Status */ +#define BCMA_CORE_PCI_DLLP_LAREG 0x108 /* Link Attention */ +#define BCMA_CORE_PCI_DLLP_LSREG_LINKUP (1 << 16) +#define BCMA_CORE_PCI_DLLP_LAMASKREG 0x10C /* Link Attention Mask */ +#define BCMA_CORE_PCI_DLLP_NEXTTXSEQNUMREG 0x110 /* Next Tx Seq Num */ +#define BCMA_CORE_PCI_DLLP_ACKEDTXSEQNUMREG 0x114 /* Acked Tx Seq Num */ +#define BCMA_CORE_PCI_DLLP_PURGEDTXSEQNUMREG 0x118 /* Purged Tx Seq Num */ +#define BCMA_CORE_PCI_DLLP_RXSEQNUMREG 0x11C /* Rx Sequence Number */ +#define BCMA_CORE_PCI_DLLP_LRREG 0x120 /* Link Replay */ +#define BCMA_CORE_PCI_DLLP_LACKTOREG 0x124 /* Link Ack Timeout */ +#define BCMA_CORE_PCI_DLLP_PMTHRESHREG 0x128 /* Power Management Threshold */ +#define BCMA_CORE_PCI_DLLP_RTRYWPREG 0x12C /* Retry buffer write ptr */ +#define BCMA_CORE_PCI_DLLP_RTRYRPREG 0x130 /* Retry buffer Read ptr */ +#define BCMA_CORE_PCI_DLLP_RTRYPPREG 0x134 /* Retry buffer Purged ptr */ +#define BCMA_CORE_PCI_DLLP_RTRRWREG 0x138 /* Retry buffer Read/Write */ +#define BCMA_CORE_PCI_DLLP_ECTHRESHREG 0x13C /* Error Count Threshold */ +#define BCMA_CORE_PCI_DLLP_TLPERRCTRREG 0x140 /* TLP Error Counter */ +#define BCMA_CORE_PCI_DLLP_ERRCTRREG 0x144 /* Error Counter */ +#define BCMA_CORE_PCI_DLLP_NAKRXCTRREG 0x148 /* NAK Received Counter */ +#define BCMA_CORE_PCI_DLLP_TESTREG 0x14C /* Test */ +#define BCMA_CORE_PCI_DLLP_PKTBIST 0x150 /* Packet BIST */ +#define BCMA_CORE_PCI_DLLP_PCIE11 0x154 /* DLLP PCIE 1.1 reg */ + +/* SERDES RX registers */ +#define BCMA_CORE_PCI_SERDES_RX_CTRL 1 /* Rx cntrl */ +#define BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE 0x80 /* rxpolarity_force */ +#define BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY 0x40 /* rxpolarity_value */ +#define BCMA_CORE_PCI_SERDES_RX_TIMER1 2 /* Rx Timer1 */ +#define BCMA_CORE_PCI_SERDES_RX_CDR 6 /* CDR */ +#define BCMA_CORE_PCI_SERDES_RX_CDRBW 7 /* CDR BW */ + +/* SERDES PLL registers */ +#define BCMA_CORE_PCI_SERDES_PLL_CTRL 1 /* PLL control reg */ +#define BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN 0x4000 /* bit 14 is FREQDET on */ + /* PCIcore specific boardflags */ #define BCMA_CORE_PCI_BFL_NOPCI 0x00000400 /* Board leaves PCI floating */ -- cgit From d1a7a8e1d367e34e5adce91f48cae07dc08d9e6c Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Tue, 31 Jan 2012 00:03:34 +0100 Subject: bcma: make some functions __devinit bcma_core_pci_hostmode_init() has to be in __devinit as it will call a function in that section and so all functions calling it also have to be in __devinit. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville --- include/linux/bcma/bcma_driver_pci.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/bcma/bcma_driver_pci.h b/include/linux/bcma/bcma_driver_pci.h index 67ea7beff9f3..679d4cab4547 100644 --- a/include/linux/bcma/bcma_driver_pci.h +++ b/include/linux/bcma/bcma_driver_pci.h @@ -169,7 +169,7 @@ struct bcma_drv_pci { #define pcicore_read32(pc, offset) bcma_read32((pc)->core, offset) #define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val) -extern void bcma_core_pci_init(struct bcma_drv_pci *pc); +extern void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc); extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, bool enable); -- cgit From 49dc9577155576b10ff79f0c1486c816b01f58bf Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Tue, 31 Jan 2012 00:03:35 +0100 Subject: bcma: add PCIe host controller Some SoCs have a PCIe host controller to make it possible to attach some other devices to it, like an other Wifi card. This code was tested with an Netgear WNDR3400 (bcm4716 based), but should work with all bcma based SoCs. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville --- include/linux/bcma/bcma_driver_pci.h | 38 ++++++++++++++++++++++++++++++++++++ include/linux/bcma/bcma_regs.h | 27 +++++++++++++++++++++++++ 2 files changed, 65 insertions(+) (limited to 'include/linux') diff --git a/include/linux/bcma/bcma_driver_pci.h b/include/linux/bcma/bcma_driver_pci.h index 679d4cab4547..46c71e27d31f 100644 --- a/include/linux/bcma/bcma_driver_pci.h +++ b/include/linux/bcma/bcma_driver_pci.h @@ -160,9 +160,44 @@ struct pci_dev; /* PCIcore specific boardflags */ #define BCMA_CORE_PCI_BFL_NOPCI 0x00000400 /* Board leaves PCI floating */ +/* PCIE Config space accessing MACROS */ +#define BCMA_CORE_PCI_CFG_BUS_SHIFT 24 /* Bus shift */ +#define BCMA_CORE_PCI_CFG_SLOT_SHIFT 19 /* Slot/Device shift */ +#define BCMA_CORE_PCI_CFG_FUN_SHIFT 16 /* Function shift */ +#define BCMA_CORE_PCI_CFG_OFF_SHIFT 0 /* Register shift */ + +#define BCMA_CORE_PCI_CFG_BUS_MASK 0xff /* Bus mask */ +#define BCMA_CORE_PCI_CFG_SLOT_MASK 0x1f /* Slot/Device mask */ +#define BCMA_CORE_PCI_CFG_FUN_MASK 7 /* Function mask */ +#define BCMA_CORE_PCI_CFG_OFF_MASK 0xfff /* Register mask */ + +/* PCIE Root Capability Register bits (Host mode only) */ +#define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001 + +struct bcma_drv_pci; + +#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE +struct bcma_drv_pci_host { + struct bcma_drv_pci *pdev; + + u32 host_cfg_addr; + spinlock_t cfgspace_lock; + + struct pci_controller pci_controller; + struct pci_ops pci_ops; + struct resource mem_resource; + struct resource io_resource; +}; +#endif + struct bcma_drv_pci { struct bcma_device *core; u8 setup_done:1; + u8 hostmode:1; + +#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE + struct bcma_drv_pci_host *host_controller; +#endif }; /* Register access */ @@ -173,4 +208,7 @@ extern void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc); extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, bool enable); +extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev); +extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev); + #endif /* LINUX_BCMA_DRIVER_PCI_H_ */ diff --git a/include/linux/bcma/bcma_regs.h b/include/linux/bcma/bcma_regs.h index 9faae2ae02e8..5a71d5719640 100644 --- a/include/linux/bcma/bcma_regs.h +++ b/include/linux/bcma/bcma_regs.h @@ -56,4 +56,31 @@ #define BCMA_PCI_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */ #define BCMA_PCI_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */ +/* SiliconBackplane Address Map. + * All regions may not exist on all chips. + */ +#define BCMA_SOC_SDRAM_BASE 0x00000000U /* Physical SDRAM */ +#define BCMA_SOC_PCI_MEM 0x08000000U /* Host Mode sb2pcitranslation0 (64 MB) */ +#define BCMA_SOC_PCI_MEM_SZ (64 * 1024 * 1024) +#define BCMA_SOC_PCI_CFG 0x0c000000U /* Host Mode sb2pcitranslation1 (64 MB) */ +#define BCMA_SOC_SDRAM_SWAPPED 0x10000000U /* Byteswapped Physical SDRAM */ +#define BCMA_SOC_SDRAM_R2 0x80000000U /* Region 2 for sdram (512 MB) */ + + +#define BCMA_SOC_PCI_DMA 0x40000000U /* Client Mode sb2pcitranslation2 (1 GB) */ +#define BCMA_SOC_PCI_DMA2 0x80000000U /* Client Mode sb2pcitranslation2 (1 GB) */ +#define BCMA_SOC_PCI_DMA_SZ 0x40000000U /* Client Mode sb2pcitranslation2 size in bytes */ +#define BCMA_SOC_PCIE_DMA_L32 0x00000000U /* PCIE Client Mode sb2pcitranslation2 + * (2 ZettaBytes), low 32 bits + */ +#define BCMA_SOC_PCIE_DMA_H32 0x80000000U /* PCIE Client Mode sb2pcitranslation2 + * (2 ZettaBytes), high 32 bits + */ + +#define BCMA_SOC_PCI1_MEM 0x40000000U /* Host Mode sb2pcitranslation0 (64 MB) */ +#define BCMA_SOC_PCI1_CFG 0x44000000U /* Host Mode sb2pcitranslation1 (64 MB) */ +#define BCMA_SOC_PCIE1_DMA_H32 0xc0000000U /* PCIE Client Mode sb2pcitranslation2 + * (2 ZettaBytes), high 32 bits + */ + #endif /* LINUX_BCMA_REGS_H_ */ -- cgit From 8f9ada4fa1926e540b1562cb9bacb3e51a698c35 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Tue, 31 Jan 2012 00:03:36 +0100 Subject: bcma: add bus num counter If we have two bcma buses on one computer the second will not work without this patch. Now each bus gets an own number. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville --- include/linux/bcma/bcma.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h index 024a6e2a9083..b9f65fbee42f 100644 --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -196,6 +196,7 @@ struct bcma_bus { struct list_head cores; u8 nr_cores; u8 init_done:1; + u8 num; struct bcma_drv_cc drv_cc; struct bcma_drv_pci drv_pci; -- cgit From d6865dcc58f252480515101fd13532f0fc420b53 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Tue, 31 Jan 2012 00:03:37 +0100 Subject: bcma: add extra sprom check This check is needed on the BCM43224 device as it says in the capabilities it has an sprom but is extra check says it has not. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville --- include/linux/bcma/bcma_driver_chipcommon.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'include/linux') diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index a33086a7530b..e72938b10714 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -181,6 +181,22 @@ #define BCMA_CC_FLASH_CFG 0x0128 #define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ #define BCMA_CC_FLASH_WAITCNT 0x012C +#define BCMA_CC_SROM_CONTROL 0x0190 +#define BCMA_CC_SROM_CONTROL_START 0x80000000 +#define BCMA_CC_SROM_CONTROL_BUSY 0x80000000 +#define BCMA_CC_SROM_CONTROL_OPCODE 0x60000000 +#define BCMA_CC_SROM_CONTROL_OP_READ 0x00000000 +#define BCMA_CC_SROM_CONTROL_OP_WRITE 0x20000000 +#define BCMA_CC_SROM_CONTROL_OP_WRDIS 0x40000000 +#define BCMA_CC_SROM_CONTROL_OP_WREN 0x60000000 +#define BCMA_CC_SROM_CONTROL_OTPSEL 0x00000010 +#define BCMA_CC_SROM_CONTROL_LOCK 0x00000008 +#define BCMA_CC_SROM_CONTROL_SIZE_MASK 0x00000006 +#define BCMA_CC_SROM_CONTROL_SIZE_1K 0x00000000 +#define BCMA_CC_SROM_CONTROL_SIZE_4K 0x00000002 +#define BCMA_CC_SROM_CONTROL_SIZE_16K 0x00000004 +#define BCMA_CC_SROM_CONTROL_SIZE_SHIFT 1 +#define BCMA_CC_SROM_CONTROL_PRESENT 0x00000001 /* 0x1E0 is defined as shared BCMA_CLKCTLST */ #define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ #define BCMA_CC_UART0_DATA 0x0300 -- cgit From c3059be16c9ef29c05f0876a9df5fea21f29724f Mon Sep 17 00:00:00 2001 From: Shriram Rajagopalan Date: Sun, 5 Feb 2012 13:51:32 +0000 Subject: net/sched: sch_plug - Queue traffic until an explicit release command The qdisc supports two operations - plug and unplug. When the qdisc receives a plug command via netlink request, packets arriving henceforth are buffered until a corresponding unplug command is received. Depending on the type of unplug command, the queue can be unplugged indefinitely or selectively. This qdisc can be used to implement output buffering, an essential functionality required for consistent recovery in checkpoint based fault-tolerance systems. Output buffering enables speculative execution by allowing generated network traffic to be rolled back. It is used to provide network protection for Xen Guests in the Remus high availability project, available as part of Xen. This module is generic enough to be used by any other system that wishes to add speculative execution and output buffering to its applications. This module was originally available in the linux 2.6.32 PV-OPS tree, used as dom0 for Xen. For more information, please refer to http://nss.cs.ubc.ca/remus/ and http://wiki.xensource.com/xenwiki/Remus Changes in V3: * Removed debug output (printk) on queue overflow * Added TCQ_PLUG_RELEASE_INDEFINITE - that allows the user to use this qdisc, for simple plug/unplug operations. * Use of packet counts instead of pointers to keep track of the buffers in the queue. Signed-off-by: Shriram Rajagopalan Signed-off-by: Brendan Cully [author of the code in the linux 2.6.32 pvops tree] Signed-off-by: David S. Miller --- include/linux/pkt_sched.h | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pkt_sched.h b/include/linux/pkt_sched.h index 0d5b79365d03..410b33d014d2 100644 --- a/include/linux/pkt_sched.h +++ b/include/linux/pkt_sched.h @@ -127,6 +127,27 @@ struct tc_multiq_qopt { __u16 max_bands; /* Maximum number of queues */ }; +/* PLUG section */ + +#define TCQ_PLUG_BUFFER 0 +#define TCQ_PLUG_RELEASE_ONE 1 +#define TCQ_PLUG_RELEASE_INDEFINITE 2 +#define TCQ_PLUG_LIMIT 3 + +struct tc_plug_qopt { + /* TCQ_PLUG_BUFFER: Inset a plug into the queue and + * buffer any incoming packets + * TCQ_PLUG_RELEASE_ONE: Dequeue packets from queue head + * to beginning of the next plug. + * TCQ_PLUG_RELEASE_INDEFINITE: Dequeue all packets from queue. + * Stop buffering packets until the next TCQ_PLUG_BUFFER + * command is received (just act as a pass-thru queue). + * TCQ_PLUG_LIMIT: Increase/decrease queue size + */ + int action; + __u32 limit; +}; + /* TBF section */ struct tc_tbf_qopt { -- cgit From 76e21053b5bf33a07c76f99d27a74238310e3c71 Mon Sep 17 00:00:00 2001 From: "Erich E. Hoover" Date: Wed, 8 Feb 2012 09:11:07 +0000 Subject: ipv4: Implement IP_UNICAST_IF socket option. The IP_UNICAST_IF feature is needed by the Wine project. This patch implements the feature by setting the outgoing interface in a similar fashion to that of IP_MULTICAST_IF. A separate option is needed to handle this feature since the existing options do not provide all of the characteristics required by IP_UNICAST_IF, a summary is provided below. SO_BINDTODEVICE: * SO_BINDTODEVICE requires administrative privileges, IP_UNICAST_IF does not. From reading some old mailing list articles my understanding is that SO_BINDTODEVICE requires administrative privileges because it can override the administrator's routing settings. * The SO_BINDTODEVICE option restricts both outbound and inbound traffic, IP_UNICAST_IF only impacts outbound traffic. IP_PKTINFO: * Since IP_PKTINFO and IP_UNICAST_IF are independent options, implementing IP_UNICAST_IF with IP_PKTINFO will likely break some applications. * Implementing IP_UNICAST_IF on top of IP_PKTINFO significantly complicates the Wine codebase and reduces the socket performance (doing this requires a lot of extra communication between the "server" and "user" layers). bind(): * bind() does not work on broadcast packets, IP_UNICAST_IF is specifically intended to work with broadcast packets. * Like SO_BINDTODEVICE, bind() restricts both outbound and inbound traffic. Signed-off-by: Erich E. Hoover Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/in.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/in.h b/include/linux/in.h index 01129c0ea87c..e0337f11d92e 100644 --- a/include/linux/in.h +++ b/include/linux/in.h @@ -111,6 +111,7 @@ struct in_addr { #define MCAST_LEAVE_SOURCE_GROUP 47 #define MCAST_MSFILTER 48 #define IP_MULTICAST_ALL 49 +#define IP_UNICAST_IF 50 #define MCAST_EXCLUDE 0 #define MCAST_INCLUDE 1 -- cgit From c4062dfc425e94290ac427a98d6b4721dd2bc91f Mon Sep 17 00:00:00 2001 From: "Erich E. Hoover" Date: Wed, 8 Feb 2012 09:11:08 +0000 Subject: ipv6: Implement IPV6_UNICAST_IF socket option. The IPV6_UNICAST_IF feature is the IPv6 compliment to IP_UNICAST_IF. Signed-off-by: Erich E. Hoover Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/in6.h | 1 + include/linux/ipv6.h | 1 + 2 files changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/in6.h b/include/linux/in6.h index 097a34b55560..5c83d9e3eb8f 100644 --- a/include/linux/in6.h +++ b/include/linux/in6.h @@ -271,6 +271,7 @@ struct in6_flowlabel_req { #define IPV6_ORIGDSTADDR 74 #define IPV6_RECVORIGDSTADDR IPV6_ORIGDSTADDR #define IPV6_TRANSPARENT 75 +#define IPV6_UNICAST_IF 76 /* * Multicast Routing: diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h index 6318268dcaf5..743a16a41040 100644 --- a/include/linux/ipv6.h +++ b/include/linux/ipv6.h @@ -324,6 +324,7 @@ struct ipv6_pinfo { __unused_2:6; __s16 mcast_hops:9; #endif + int ucast_oif; int mcast_oif; /* pktoption flags */ -- cgit From 59a084a70afa0678bda2a23a7bc7cc59664945c7 Mon Sep 17 00:00:00 2001 From: "K. Y. Srinivasan" Date: Thu, 2 Feb 2012 16:56:48 -0800 Subject: drivers: hv: Cleanup the kvp related state in hyperv.h Now cleanup the hyperv.h with regards to KVP definitions. Signed-off-by: K. Y. Srinivasan Signed-off-by: Haiyang Zhang Signed-off-by: Greg Kroah-Hartman --- include/linux/hyperv.h | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-) (limited to 'include/linux') diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index 7332b3faecc8..b822978ecbc8 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -137,7 +137,6 @@ struct hv_ku_msg { -#ifdef __KERNEL__ /* * Registry value types. @@ -163,28 +162,30 @@ enum hv_kvp_exchg_pool { }; struct hv_kvp_hdr { - u8 operation; - u8 pool; -}; + __u8 operation; + __u8 pool; + __u16 pad; +} __attribute__((packed)); struct hv_kvp_exchg_msg_value { - u32 value_type; - u32 key_size; - u32 value_size; - u8 key[HV_KVP_EXCHANGE_MAX_KEY_SIZE]; - u8 value[HV_KVP_EXCHANGE_MAX_VALUE_SIZE]; -}; + __u32 value_type; + __u32 key_size; + __u32 value_size; + __u8 key[HV_KVP_EXCHANGE_MAX_KEY_SIZE]; + __u8 value[HV_KVP_EXCHANGE_MAX_VALUE_SIZE]; +} __attribute__((packed)); struct hv_kvp_msg_enumerate { - u32 index; + __u32 index; struct hv_kvp_exchg_msg_value data; -}; +} __attribute__((packed)); struct hv_kvp_msg { struct hv_kvp_hdr kvp_hdr; struct hv_kvp_msg_enumerate kvp_data; -}; +} __attribute__((packed)); +#ifdef __KERNEL__ #include #include #include -- cgit From 2640335438ca4d7b139e114dae5f0d80e740e106 Mon Sep 17 00:00:00 2001 From: "K. Y. Srinivasan" Date: Thu, 2 Feb 2012 16:56:50 -0800 Subject: drivers: hv: kvp: Cleanup the kernel/user protocol Now, cleanup the user/kernel KVP protocol by using the same structure definition that is used for host/guest KVP protocol. This simplifies the code. Signed-off-by: K. Y. Srinivasan Signed-off-by: Haiyang Zhang Signed-off-by: Greg Kroah-Hartman --- include/linux/hyperv.h | 30 +++++------------------------- 1 file changed, 5 insertions(+), 25 deletions(-) (limited to 'include/linux') diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index b822978ecbc8..75aee6720c1b 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -113,30 +113,6 @@ * (not supported), a NULL key string is returned. */ -/* - * - * The following definitions are shared with the user-mode component; do not - * change any of this without making the corresponding changes in - * the KVP user-mode component. - */ - -enum hv_ku_op { - KVP_REGISTER = 0, /* Register the user mode component */ - KVP_KERNEL_GET, /* Kernel is requesting the value */ - KVP_KERNEL_SET, /* Kernel is providing the value */ - KVP_USER_GET, /* User is requesting the value */ - KVP_USER_SET /* User is providing the value */ -}; - -struct hv_ku_msg { - __u32 kvp_index; /* Key index */ - __u8 kvp_key[HV_KVP_EXCHANGE_MAX_KEY_SIZE]; /* Key name */ - __u8 kvp_value[HV_KVP_EXCHANGE_MAX_VALUE_SIZE]; /* Key value */ -}; - - - - /* * Registry value types. @@ -149,6 +125,7 @@ enum hv_kvp_exchg_op { KVP_OP_SET, KVP_OP_DELETE, KVP_OP_ENUMERATE, + KVP_OP_REGISTER, KVP_OP_COUNT /* Number of operations, must be last. */ }; @@ -182,7 +159,10 @@ struct hv_kvp_msg_enumerate { struct hv_kvp_msg { struct hv_kvp_hdr kvp_hdr; - struct hv_kvp_msg_enumerate kvp_data; + union { + struct hv_kvp_msg_enumerate kvp_enum_data; + char kvp_version[HV_KVP_EXCHANGE_MAX_KEY_SIZE]; + } body; } __attribute__((packed)); #ifdef __KERNEL__ -- cgit From aad4f4000cecec9c80b5f9aff91043dc104d61a0 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 18 Nov 2011 10:12:49 -0800 Subject: PCI: Add helper macro for pci_register_driver boilerplate This patch introduces the module_pci_driver macro which is a convenience macro for PCI driver modules similar to module_platform_driver. It is intended to be used by drivers which init/exit section does nothing but register/unregister the PCI driver. By using this macro it is possible to eliminate a few lines of boilerplate code per PCI driver. Based on work done by Lars-Peter Clausen for other busses (i2c and spi). Cc: Lars-Peter Clausen Signed-off-by: Greg Kroah-Hartman Acked-by: Jesse Barnes Signed-off-by: Greg Kroah-Hartman --- include/linux/pci.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index a16b1df3deff..d4afd703e948 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -946,6 +946,19 @@ int __must_check __pci_register_driver(struct pci_driver *, struct module *, __pci_register_driver(driver, THIS_MODULE, KBUILD_MODNAME) void pci_unregister_driver(struct pci_driver *dev); + +/** + * module_pci_driver() - Helper macro for registering a PCI driver + * @__pci_driver: pci_driver struct + * + * Helper macro for PCI drivers which do not do anything special in module + * init/exit. This eliminates a lot of boilerplate. Each module may only + * use this macro once, and calling it replaces module_init() and module_exit() + */ +#define module_pci_driver(__pci_driver) \ + module_driver(__pci_driver, pci_register_driver, \ + pci_unregister_driver) + void pci_remove_behind_bridge(struct pci_dev *dev); struct pci_driver *pci_dev_driver(const struct pci_dev *dev); int pci_add_dynid(struct pci_driver *drv, -- cgit From 0846e7e9856c0928223447d9349a877202a63f24 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Fri, 3 Feb 2012 17:11:54 -0500 Subject: usb: Add support for indicating whether a port is removable Userspace may want to make policy decisions based on whether or not a given USB device is removable. Add a per-device member and support for exposing it in sysfs. Information sources to populate it will be added later. Signed-off-by: Matthew Garrett Signed-off-by: Greg Kroah-Hartman --- include/linux/usb.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb.h b/include/linux/usb.h index 27a4e16d2bf1..b2eb3a47caf5 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -376,6 +376,12 @@ struct usb_bus { struct usb_tt; +enum usb_device_removable { + USB_DEVICE_REMOVABLE_UNKNOWN = 0, + USB_DEVICE_REMOVABLE, + USB_DEVICE_FIXED, +}; + /** * struct usb_device - kernel's representation of a USB device * @devnum: device number; address on a USB bus @@ -432,6 +438,7 @@ struct usb_tt; * @wusb_dev: if this is a Wireless USB device, link to the WUSB * specific data for the device. * @slot_id: Slot ID assigned by xHCI + * @removable: Device can be physically removed from this port * * Notes: * Usbcore drivers should not set usbdev->state directly. Instead use @@ -509,6 +516,7 @@ struct usb_device { #endif struct wusb_dev *wusb_dev; int slot_id; + enum usb_device_removable removable; }; #define to_usb_device(d) container_of(d, struct usb_device, dev) -- cgit From e688355bfeadf17ef522b1e62cc12f8e88e69667 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 6 Feb 2012 19:22:19 +0100 Subject: USB: serial: add macro for console error reporting Add macro which prints an error message only once if port is used a console. Reporting errors in a write path when port is used as a console could otherwise result in an infinite loop. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/serial.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index 4267a9c717ba..10cb74d2ad1d 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -389,5 +389,20 @@ do { \ printk(KERN_DEBUG "%s: " format "\n", __FILE__, ##arg); \ } while (0) +/* + * Macro for reporting errors in write path to avoid inifinite loop + * when port is used as a console. + */ +#define dev_err_console(usport, fmt, ...) \ +do { \ + static bool __print_once; \ + struct usb_serial_port *__port = (usport); \ + \ + if (!__port->port.console || !__print_once) { \ + __print_once = true; \ + dev_err(&__port->dev, fmt, ##__VA_ARGS__); \ + } \ +} while (0) + #endif /* __LINUX_USB_SERIAL_H */ -- cgit From 3f5dc70721af68b76ad544b0c61fea365d67c041 Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Wed, 8 Feb 2012 14:35:46 +0100 Subject: tty: serial: altera_uart: remove early_altera_uart_setup The function has no users inside the tree and the nios2 (out-of-mainline) port doesn't use it either (anymore). Signed-off-by: Tobias Klauser Signed-off-by: Greg Kroah-Hartman --- include/linux/altera_uart.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/altera_uart.h b/include/linux/altera_uart.h index a10a90791976..c022c82db7ca 100644 --- a/include/linux/altera_uart.h +++ b/include/linux/altera_uart.h @@ -5,8 +5,6 @@ #ifndef __ALTUART_H #define __ALTUART_H -#include - struct altera_uart_platform_uart { unsigned long mapbase; /* Physical address base */ unsigned int irq; /* Interrupt vector */ @@ -14,6 +12,4 @@ struct altera_uart_platform_uart { unsigned int bus_shift; /* Bus shift (address stride) */ }; -int __init early_altera_uart_setup(struct altera_uart_platform_uart *platp); - #endif /* __ALTUART_H */ -- cgit From 6816383a09b5be8d35f14f4c25dedb64498e4959 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Thu, 9 Feb 2012 18:48:19 -0500 Subject: tty: sparc: rename drivers/tty/serial/suncore.h -> include/linux/sunserialcore.h There are multiple users of this file from different source paths now, and rather than have ../ paths in include statements, just move the file to the linux header dir. Suggested-by: David S. Miller Signed-off-by: Paul Gortmaker Acked-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- include/linux/sunserialcore.h | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 include/linux/sunserialcore.h (limited to 'include/linux') diff --git a/include/linux/sunserialcore.h b/include/linux/sunserialcore.h new file mode 100644 index 000000000000..68e7430bb0fe --- /dev/null +++ b/include/linux/sunserialcore.h @@ -0,0 +1,33 @@ +/* sunserialcore.h + * + * Generic SUN serial/kbd/ms layer. Based entirely + * upon drivers/sbus/char/sunserial.h which is: + * + * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) + * + * Port to new UART layer is: + * + * Copyright (C) 2002 David S. Miller (davem@redhat.com) + */ + +#ifndef _SERIAL_SUN_H +#define _SERIAL_SUN_H + +/* Serial keyboard defines for L1-A processing... */ +#define SUNKBD_RESET 0xff +#define SUNKBD_L1 0x01 +#define SUNKBD_UP 0x80 +#define SUNKBD_A 0x4d + +extern unsigned int suncore_mouse_baud_cflag_next(unsigned int, int *); +extern int suncore_mouse_baud_detection(unsigned char, int); + +extern int sunserial_register_minors(struct uart_driver *, int); +extern void sunserial_unregister_minors(struct uart_driver *, int); + +extern int sunserial_console_match(struct console *, struct device_node *, + struct uart_driver *, int, bool); +extern void sunserial_console_termios(struct console *, + struct device_node *); + +#endif /* !(_SERIAL_SUN_H) */ -- cgit From 74d1d82cdaaec727f5072eb1c9f49b7e920e076f Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Mon, 6 Feb 2012 11:22:22 -0800 Subject: drivers/base: add bus for System-on-Chip devices Traditionally, any System-on-Chip based platform creates a flat list of platform_devices directly under /sys/devices/platform. In order to give these some better structure, this introduces a new bus type for soc_devices that are registered with the new soc_device_register() function. All devices that are on the same chip should then be registered as child devices of the soc device. The soc bus also exports a few standardised device attributes which allow user space to query the specific type of soc. Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman --- include/linux/sys_soc.h | 37 +++++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) create mode 100644 include/linux/sys_soc.h (limited to 'include/linux') diff --git a/include/linux/sys_soc.h b/include/linux/sys_soc.h new file mode 100644 index 000000000000..2739ccb69571 --- /dev/null +++ b/include/linux/sys_soc.h @@ -0,0 +1,37 @@ +/* + * Copyright (C) ST-Ericsson SA 2011 + * Author: Lee Jones for ST-Ericsson. + * License terms: GNU General Public License (GPL), version 2 + */ +#ifndef __SOC_BUS_H +#define __SOC_BUS_H + +#include + +struct soc_device_attribute { + const char *machine; + const char *family; + const char *revision; + const char *soc_id; +}; + +/** + * soc_device_register - register SoC as a device + * @soc_plat_dev_attr: Attributes passed from platform to be attributed to a SoC + */ +struct soc_device *soc_device_register( + struct soc_device_attribute *soc_plat_dev_attr); + +/** + * soc_device_unregister - unregister SoC device + * @dev: SoC device to be unregistered + */ +void soc_device_unregister(struct soc_device *soc_dev); + +/** + * soc_device_to_device - helper function to fetch struct device + * @soc: Previously registered SoC device container + */ +struct device *soc_device_to_device(struct soc_device *soc); + +#endif /* __SOC_BUS_H */ -- cgit From 4031ae6edb92f7e0aade76357813211ae0520a5c Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Fri, 27 Jan 2012 06:22:53 +0000 Subject: skbuff: Move rxhash and vlan_tci to consolidate holes in sk_buff This change helps to reduce the overall size of the sk_buff by moving rxhash and vlan_tci so that the u16 values and u8 bitfields can be better combined to create only one hole instead of multiple. Signed-off-by: Alexander Duyck Tested-by: Stephen Ko Signed-off-by: Jeff Kirsher --- include/linux/skbuff.h | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 50db9b04a552..2b7317ff297f 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -438,6 +438,11 @@ struct sk_buff { #endif int skb_iif; + + __u32 rxhash; + + __u16 vlan_tci; + #ifdef CONFIG_NET_SCHED __u16 tc_index; /* traffic control index */ #ifdef CONFIG_NET_CLS_ACT @@ -445,8 +450,6 @@ struct sk_buff { #endif #endif - __u32 rxhash; - __u16 queue_mapping; kmemcheck_bitfield_begin(flags2); #ifdef CONFIG_IPV6_NDISC_NODETYPE @@ -470,8 +473,6 @@ struct sk_buff { __u32 dropcount; }; - __u16 vlan_tci; - sk_buff_data_t transport_header; sk_buff_data_t network_header; sk_buff_data_t mac_header; -- cgit From 9388dc3047a88bedfd867e9ba3e1980c815ac524 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 9 Feb 2012 20:45:19 +0400 Subject: sched: Turn lock_task_sighand() into a static inline It appears that sparse tool understands static inline functions for context balance checking, so let's turn the macros into an inline func. This makes the code a little bit more robust. Suggested-by: Oleg Nesterov Signed-off-by: Anton Vorontsov Cc: KOSAKI Motohiro Cc: Greg KH Cc: Arve Cc: San Mehat Cc: Colin Cross Cc: Eric W. Biederman Cc: Paul E. McKenney Cc: kernel-team@android.com Cc: linaro-kernel@lists.linaro.org Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20120209164519.GA10266@oksana.dev.rtsoft.ru Signed-off-by: Ingo Molnar --- include/linux/sched.h | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index 92313a3f6f77..5dba2ad52431 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -2393,12 +2393,15 @@ static inline void task_unlock(struct task_struct *p) extern struct sighand_struct *__lock_task_sighand(struct task_struct *tsk, unsigned long *flags); -#define lock_task_sighand(tsk, flags) \ -({ struct sighand_struct *__ss; \ - __cond_lock(&(tsk)->sighand->siglock, \ - (__ss = __lock_task_sighand(tsk, flags))); \ - __ss; \ -}) \ +static inline struct sighand_struct *lock_task_sighand(struct task_struct *tsk, + unsigned long *flags) +{ + struct sighand_struct *ret; + + ret = __lock_task_sighand(tsk, flags); + (void)__cond_lock(&tsk->sighand->siglock, ret); + return ret; +} static inline void unlock_task_sighand(struct task_struct *tsk, unsigned long *flags) -- cgit From 7a3198a89722ad9521d22b05938d357eac7460fa Mon Sep 17 00:00:00 2001 From: Jiri Benc Date: Thu, 9 Feb 2012 09:34:41 +0000 Subject: ipv6: helper function to get tclass Implement helper inline function to get traffic class from IPv6 header. Signed-off-by: Jiri Benc Signed-off-by: David S. Miller --- include/linux/ipv6.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h index 743a16a41040..4847a64d3c0a 100644 --- a/include/linux/ipv6.h +++ b/include/linux/ipv6.h @@ -233,6 +233,11 @@ static inline struct ipv6hdr *ipipv6_hdr(const struct sk_buff *skb) return (struct ipv6hdr *)skb_transport_header(skb); } +static inline __u8 ipv6_tclass(const struct ipv6hdr *iph) +{ + return (ntohl(*(__be32 *)iph) >> 20) & 0xff; +} + /* This structure contains results of exthdrs parsing as offsets from skb->nh. -- cgit From 4c507d2897bd9be810b3403ade73b04cf6fdfd4a Mon Sep 17 00:00:00 2001 From: Jiri Benc Date: Thu, 9 Feb 2012 09:35:49 +0000 Subject: net: implement IP_RECVTOS for IP_PKTOPTIONS Currently, it is not easily possible to get TOS/DSCP value of packets from an incoming TCP stream. The mechanism is there, IP_PKTOPTIONS getsockopt with IP_RECVTOS set, the same way as incoming TTL can be queried. This is not actually implemented for TOS, though. This patch adds this functionality, both for IPv4 (IP_PKTOPTIONS) and IPv6 (IPV6_2292PKTOPTIONS). For IPv4, like in the IP_RECVTTL case, the value of the TOS field is stored from the other party's ACK. This is needed for proxies which require DSCP transparency. One such example is at http://zph.bratcheda.org/. Signed-off-by: Jiri Benc Signed-off-by: David S. Miller --- include/linux/ipv6.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h index 4847a64d3c0a..8260ef779762 100644 --- a/include/linux/ipv6.h +++ b/include/linux/ipv6.h @@ -366,7 +366,7 @@ struct ipv6_pinfo { dontfrag:1; __u8 min_hopcount; __u8 tclass; - __u8 padding; + __u8 rcv_tclass; __u32 dst_cookie; -- cgit From 1a0d6ae5795c376bae6d012fb25e8341e4c6d5f2 Mon Sep 17 00:00:00 2001 From: Danny Kukawka Date: Thu, 9 Feb 2012 09:48:54 +0000 Subject: rename dev_hw_addr_random and remove redundant second Renamed dev_hw_addr_random to eth_hw_addr_random() to reflect that this function only assign a random ethernet address (MAC). Removed the second parameter (u8 *hwaddr), it's redundant since the also given net_device already contains net_device->dev_addr. Set it directly. Adapt igbvf and ixgbevf to the changed function. Small fix for ixgbevf_probe(): if ixgbevf_sw_init() fails (which means the device got no dev_addr) handle the error and jump to err_sw_init as already done by igbvf in similar case. Signed-off-by: Danny Kukawka Signed-off-by: David S. Miller --- include/linux/etherdevice.h | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h index 05955cf09937..8a1835855faa 100644 --- a/include/linux/etherdevice.h +++ b/include/linux/etherdevice.h @@ -140,17 +140,18 @@ static inline void random_ether_addr(u8 *addr) } /** - * dev_hw_addr_random - Create random MAC and set device flag + * eth_hw_addr_random - Generate software assigned random Ethernet and + * set device flag * @dev: pointer to net_device structure - * @hwaddr: Pointer to a six-byte array containing the Ethernet address * - * Generate random MAC to be used by a device and set addr_assign_type - * so the state can be read by sysfs and be used by udev. + * Generate a random Ethernet address (MAC) to be used by a net device + * and set addr_assign_type so the state can be read by sysfs and be + * used by userspace. */ -static inline void dev_hw_addr_random(struct net_device *dev, u8 *hwaddr) +static inline void eth_hw_addr_random(struct net_device *dev) { dev->addr_assign_type |= NET_ADDR_RANDOM; - random_ether_addr(hwaddr); + random_ether_addr(dev->dev_addr); } /** -- cgit From 8675381109b0eb1c948a423c2b35e3f4509cb25e Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Mon, 13 Feb 2012 13:24:02 +0200 Subject: usb: otg: Rename otg_transceiver to usb_phy This is the first step in separating USB transceivers from USB OTG utilities. Includes fixes to IMX code from Sascha Hauer. Signed-off-by: Heikki Krogerus Acked-by: Sascha Hauer Acked-by: Pavankumar Kondeti Acked-by: Li Yang Acked-by: Alan Stern Acked-by: Igor Grinberg Reviewed-by: Marek Vasut Signed-off-by: Felipe Balbi --- include/linux/usb/intel_mid_otg.h | 6 +-- include/linux/usb/msm_hsusb.h | 2 +- include/linux/usb/otg.h | 98 +++++++++++++++++++-------------------- include/linux/usb/ulpi.h | 2 +- 4 files changed, 54 insertions(+), 54 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb/intel_mid_otg.h b/include/linux/usb/intel_mid_otg.h index a0ccf795f362..756cf5543ffd 100644 --- a/include/linux/usb/intel_mid_otg.h +++ b/include/linux/usb/intel_mid_otg.h @@ -104,11 +104,11 @@ struct iotg_ulpi_access_ops { /* * the Intel MID (Langwell/Penwell) otg transceiver driver needs to interact * with device and host drivers to implement the USB OTG related feature. More - * function members are added based on otg_transceiver data structure for this + * function members are added based on usb_phy data structure for this * purpose. */ struct intel_mid_otg_xceiv { - struct otg_transceiver otg; + struct usb_phy otg; struct otg_hsm hsm; /* base address */ @@ -147,7 +147,7 @@ struct intel_mid_otg_xceiv { }; static inline -struct intel_mid_otg_xceiv *otg_to_mid_xceiv(struct otg_transceiver *otg) +struct intel_mid_otg_xceiv *otg_to_mid_xceiv(struct usb_phy *otg) { return container_of(otg, struct intel_mid_otg_xceiv, otg); } diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h index 00311fe9d0df..2d3547ae9562 100644 --- a/include/linux/usb/msm_hsusb.h +++ b/include/linux/usb/msm_hsusb.h @@ -160,7 +160,7 @@ struct msm_otg_platform_data { * detection process. */ struct msm_otg { - struct otg_transceiver otg; + struct usb_phy otg; struct msm_otg_platform_data *pdata; int irq; struct clk *clk; diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h index d87f44f5b04e..e0bc55702a89 100644 --- a/include/linux/usb/otg.h +++ b/include/linux/usb/otg.h @@ -43,14 +43,14 @@ enum usb_xceiv_events { USB_EVENT_ENUMERATED, /* gadget driver enumerated */ }; -struct otg_transceiver; +struct usb_phy; /* for transceivers connected thru an ULPI interface, the user must * provide access ops */ struct otg_io_access_ops { - int (*read)(struct otg_transceiver *otg, u32 reg); - int (*write)(struct otg_transceiver *otg, u32 val, u32 reg); + int (*read)(struct usb_phy *x, u32 reg); + int (*write)(struct usb_phy *x, u32 val, u32 reg); }; /* @@ -59,7 +59,7 @@ struct otg_io_access_ops { * moment, using the transceiver, ID signal, HNP and sometimes static * configuration information (including "board isn't wired for otg"). */ -struct otg_transceiver { +struct usb_phy { struct device *dev; const char *label; unsigned int flags; @@ -82,40 +82,40 @@ struct otg_transceiver { u16 port_change; /* initialize/shutdown the OTG controller */ - int (*init)(struct otg_transceiver *otg); - void (*shutdown)(struct otg_transceiver *otg); + int (*init)(struct usb_phy *x); + void (*shutdown)(struct usb_phy *x); /* bind/unbind the host controller */ - int (*set_host)(struct otg_transceiver *otg, + int (*set_host)(struct usb_phy *x, struct usb_bus *host); /* bind/unbind the peripheral controller */ - int (*set_peripheral)(struct otg_transceiver *otg, + int (*set_peripheral)(struct usb_phy *x, struct usb_gadget *gadget); /* effective for B devices, ignored for A-peripheral */ - int (*set_power)(struct otg_transceiver *otg, + int (*set_power)(struct usb_phy *x, unsigned mA); /* effective for A-peripheral, ignored for B devices */ - int (*set_vbus)(struct otg_transceiver *otg, + int (*set_vbus)(struct usb_phy *x, bool enabled); /* for non-OTG B devices: set transceiver into suspend mode */ - int (*set_suspend)(struct otg_transceiver *otg, + int (*set_suspend)(struct usb_phy *x, int suspend); /* for B devices only: start session with A-Host */ - int (*start_srp)(struct otg_transceiver *otg); + int (*start_srp)(struct usb_phy *x); /* start or continue HNP role switch */ - int (*start_hnp)(struct otg_transceiver *otg); + int (*start_hnp)(struct usb_phy *x); }; /* for board-specific init logic */ -extern int otg_set_transceiver(struct otg_transceiver *); +extern int otg_set_transceiver(struct usb_phy *); #if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE)) /* sometimes transceivers are accessed only through e.g. ULPI */ @@ -132,50 +132,50 @@ static inline void usb_nop_xceiv_unregister(void) #endif /* helpers for direct access thru low-level io interface */ -static inline int otg_io_read(struct otg_transceiver *otg, u32 reg) +static inline int otg_io_read(struct usb_phy *x, u32 reg) { - if (otg->io_ops && otg->io_ops->read) - return otg->io_ops->read(otg, reg); + if (x->io_ops && x->io_ops->read) + return x->io_ops->read(x, reg); return -EINVAL; } -static inline int otg_io_write(struct otg_transceiver *otg, u32 val, u32 reg) +static inline int otg_io_write(struct usb_phy *x, u32 val, u32 reg) { - if (otg->io_ops && otg->io_ops->write) - return otg->io_ops->write(otg, val, reg); + if (x->io_ops && x->io_ops->write) + return x->io_ops->write(x, val, reg); return -EINVAL; } static inline int -otg_init(struct otg_transceiver *otg) +otg_init(struct usb_phy *x) { - if (otg->init) - return otg->init(otg); + if (x->init) + return x->init(x); return 0; } static inline void -otg_shutdown(struct otg_transceiver *otg) +otg_shutdown(struct usb_phy *x) { - if (otg->shutdown) - otg->shutdown(otg); + if (x->shutdown) + x->shutdown(x); } /* for usb host and peripheral controller drivers */ #ifdef CONFIG_USB_OTG_UTILS -extern struct otg_transceiver *otg_get_transceiver(void); -extern void otg_put_transceiver(struct otg_transceiver *); +extern struct usb_phy *otg_get_transceiver(void); +extern void otg_put_transceiver(struct usb_phy *); extern const char *otg_state_string(enum usb_otg_state state); #else -static inline struct otg_transceiver *otg_get_transceiver(void) +static inline struct usb_phy *otg_get_transceiver(void) { return NULL; } -static inline void otg_put_transceiver(struct otg_transceiver *x) +static inline void otg_put_transceiver(struct usb_phy *x) { } @@ -187,67 +187,67 @@ static inline const char *otg_state_string(enum usb_otg_state state) /* Context: can sleep */ static inline int -otg_start_hnp(struct otg_transceiver *otg) +otg_start_hnp(struct usb_phy *x) { - return otg->start_hnp(otg); + return x->start_hnp(x); } /* Context: can sleep */ static inline int -otg_set_vbus(struct otg_transceiver *otg, bool enabled) +otg_set_vbus(struct usb_phy *x, bool enabled) { - return otg->set_vbus(otg, enabled); + return x->set_vbus(x, enabled); } /* for HCDs */ static inline int -otg_set_host(struct otg_transceiver *otg, struct usb_bus *host) +otg_set_host(struct usb_phy *x, struct usb_bus *host) { - return otg->set_host(otg, host); + return x->set_host(x, host); } /* for usb peripheral controller drivers */ /* Context: can sleep */ static inline int -otg_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *periph) +otg_set_peripheral(struct usb_phy *x, struct usb_gadget *periph) { - return otg->set_peripheral(otg, periph); + return x->set_peripheral(x, periph); } static inline int -otg_set_power(struct otg_transceiver *otg, unsigned mA) +otg_set_power(struct usb_phy *x, unsigned mA) { - return otg->set_power(otg, mA); + return x->set_power(x, mA); } /* Context: can sleep */ static inline int -otg_set_suspend(struct otg_transceiver *otg, int suspend) +otg_set_suspend(struct usb_phy *x, int suspend) { - if (otg->set_suspend != NULL) - return otg->set_suspend(otg, suspend); + if (x->set_suspend != NULL) + return x->set_suspend(x, suspend); else return 0; } static inline int -otg_start_srp(struct otg_transceiver *otg) +otg_start_srp(struct usb_phy *x) { - return otg->start_srp(otg); + return x->start_srp(x); } /* notifiers */ static inline int -otg_register_notifier(struct otg_transceiver *otg, struct notifier_block *nb) +otg_register_notifier(struct usb_phy *x, struct notifier_block *nb) { - return atomic_notifier_chain_register(&otg->notifier, nb); + return atomic_notifier_chain_register(&x->notifier, nb); } static inline void -otg_unregister_notifier(struct otg_transceiver *otg, struct notifier_block *nb) +otg_unregister_notifier(struct usb_phy *x, struct notifier_block *nb) { - atomic_notifier_chain_unregister(&otg->notifier, nb); + atomic_notifier_chain_unregister(&x->notifier, nb); } /* for OTG controller drivers (and maybe other stuff) */ diff --git a/include/linux/usb/ulpi.h b/include/linux/usb/ulpi.h index 9595796d62ed..51ebf72bc449 100644 --- a/include/linux/usb/ulpi.h +++ b/include/linux/usb/ulpi.h @@ -181,7 +181,7 @@ /*-------------------------------------------------------------------------*/ -struct otg_transceiver *otg_ulpi_create(struct otg_io_access_ops *ops, +struct usb_phy *otg_ulpi_create(struct otg_io_access_ops *ops, unsigned int flags); #ifdef CONFIG_USB_ULPI_VIEWPORT -- cgit From de07e18c00c403d5076a5a697d83fe3ced73bc30 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Mon, 13 Feb 2012 13:24:03 +0200 Subject: usb: otg: Rename usb_xceiv_event to usb_phy_event Convert all users. Signed-off-by: Heikki Krogerus Reviewed-by: Marek Vasut Signed-off-by: Felipe Balbi --- include/linux/usb/otg.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h index e0bc55702a89..723a000146f8 100644 --- a/include/linux/usb/otg.h +++ b/include/linux/usb/otg.h @@ -35,7 +35,7 @@ enum usb_otg_state { OTG_STATE_A_VBUS_ERR, }; -enum usb_xceiv_events { +enum usb_phy_events { USB_EVENT_NONE, /* no events or cable disconnected */ USB_EVENT_VBUS, /* vbus valid event */ USB_EVENT_ID, /* id was grounded */ @@ -66,7 +66,7 @@ struct usb_phy { u8 default_a; enum usb_otg_state state; - enum usb_xceiv_events last_event; + enum usb_phy_events last_event; struct usb_bus *host; struct usb_gadget *gadget; @@ -74,7 +74,7 @@ struct usb_phy { struct otg_io_access_ops *io_ops; void __iomem *io_priv; - /* for notification of usb_xceiv_events */ + /* for notification of usb_phy_events */ struct atomic_notifier_head notifier; /* to pass extra port status to the root hub */ -- cgit From 7a8a3a9bec7432eedcb32b54a3940d0593246060 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Mon, 13 Feb 2012 13:24:04 +0200 Subject: usb: otg: Separate otg members from usb_phy Introducing struct otg and collecting otg specific members to it from struct usb_phy. There are no changes to struct usb_phy at this stage. This also renames transceiver specific functions, and offers aliases for the old otg ones. Signed-off-by: Heikki Krogerus Reviewed-by: Marek Vasut Signed-off-by: Felipe Balbi --- include/linux/usb/otg.h | 96 ++++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 79 insertions(+), 17 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h index 723a000146f8..5c1cfbc73555 100644 --- a/include/linux/usb/otg.h +++ b/include/linux/usb/otg.h @@ -48,11 +48,36 @@ struct usb_phy; /* for transceivers connected thru an ULPI interface, the user must * provide access ops */ -struct otg_io_access_ops { +struct usb_phy_io_ops { int (*read)(struct usb_phy *x, u32 reg); int (*write)(struct usb_phy *x, u32 val, u32 reg); }; +struct usb_otg { + u8 default_a; + + struct usb_phy *phy; + struct usb_bus *host; + struct usb_gadget *gadget; + + /* bind/unbind the host controller */ + int (*set_host)(struct usb_otg *otg, struct usb_bus *host); + + /* bind/unbind the peripheral controller */ + int (*set_peripheral)(struct usb_otg *otg, + struct usb_gadget *gadget); + + /* effective for A-peripheral, ignored for B devices */ + int (*set_vbus)(struct usb_otg *otg, bool enabled); + + /* for B devices only: start session with A-Host */ + int (*start_srp)(struct usb_otg *otg); + + /* start or continue HNP role switch */ + int (*start_hnp)(struct usb_otg *otg); + +}; + /* * the otg driver needs to interact with both device side and host side * usb controllers. it decides which controller is active at a given @@ -68,11 +93,13 @@ struct usb_phy { enum usb_otg_state state; enum usb_phy_events last_event; + struct usb_otg *otg; + struct usb_bus *host; struct usb_gadget *gadget; - struct otg_io_access_ops *io_ops; - void __iomem *io_priv; + struct usb_phy_io_ops *io_ops; + void __iomem *io_priv; /* for notification of usb_phy_events */ struct atomic_notifier_head notifier; @@ -115,7 +142,7 @@ struct usb_phy { /* for board-specific init logic */ -extern int otg_set_transceiver(struct usb_phy *); +extern int usb_set_transceiver(struct usb_phy *); #if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE)) /* sometimes transceivers are accessed only through e.g. ULPI */ @@ -132,7 +159,7 @@ static inline void usb_nop_xceiv_unregister(void) #endif /* helpers for direct access thru low-level io interface */ -static inline int otg_io_read(struct usb_phy *x, u32 reg) +static inline int usb_phy_io_read(struct usb_phy *x, u32 reg) { if (x->io_ops && x->io_ops->read) return x->io_ops->read(x, reg); @@ -140,7 +167,7 @@ static inline int otg_io_read(struct usb_phy *x, u32 reg) return -EINVAL; } -static inline int otg_io_write(struct usb_phy *x, u32 val, u32 reg) +static inline int usb_phy_io_write(struct usb_phy *x, u32 val, u32 reg) { if (x->io_ops && x->io_ops->write) return x->io_ops->write(x, val, reg); @@ -149,7 +176,7 @@ static inline int otg_io_write(struct usb_phy *x, u32 val, u32 reg) } static inline int -otg_init(struct usb_phy *x) +usb_phy_init(struct usb_phy *x) { if (x->init) return x->init(x); @@ -158,7 +185,7 @@ otg_init(struct usb_phy *x) } static inline void -otg_shutdown(struct usb_phy *x) +usb_phy_shutdown(struct usb_phy *x) { if (x->shutdown) x->shutdown(x); @@ -166,16 +193,16 @@ otg_shutdown(struct usb_phy *x) /* for usb host and peripheral controller drivers */ #ifdef CONFIG_USB_OTG_UTILS -extern struct usb_phy *otg_get_transceiver(void); -extern void otg_put_transceiver(struct usb_phy *); +extern struct usb_phy *usb_get_transceiver(void); +extern void usb_put_transceiver(struct usb_phy *); extern const char *otg_state_string(enum usb_otg_state state); #else -static inline struct usb_phy *otg_get_transceiver(void) +static inline struct usb_phy *usb_get_transceiver(void) { return NULL; } -static inline void otg_put_transceiver(struct usb_phy *x) +static inline void usb_put_transceiver(struct usb_phy *x) { } @@ -189,6 +216,9 @@ static inline const char *otg_state_string(enum usb_otg_state state) static inline int otg_start_hnp(struct usb_phy *x) { + if (x->otg && x->otg->start_hnp) + return x->otg->start_hnp(x->otg); + return x->start_hnp(x); } @@ -196,6 +226,9 @@ otg_start_hnp(struct usb_phy *x) static inline int otg_set_vbus(struct usb_phy *x, bool enabled) { + if (x->otg && x->otg->set_vbus) + return x->otg->set_vbus(x->otg, enabled); + return x->set_vbus(x, enabled); } @@ -203,6 +236,9 @@ otg_set_vbus(struct usb_phy *x, bool enabled) static inline int otg_set_host(struct usb_phy *x, struct usb_bus *host) { + if (x->otg && x->otg->set_host) + return x->otg->set_host(x->otg, host); + return x->set_host(x, host); } @@ -212,18 +248,23 @@ otg_set_host(struct usb_phy *x, struct usb_bus *host) static inline int otg_set_peripheral(struct usb_phy *x, struct usb_gadget *periph) { + if (x->otg && x->otg->set_peripheral) + return x->otg->set_peripheral(x->otg, periph); + return x->set_peripheral(x, periph); } static inline int -otg_set_power(struct usb_phy *x, unsigned mA) +usb_phy_set_power(struct usb_phy *x, unsigned mA) { - return x->set_power(x, mA); + if (x && x->set_power) + return x->set_power(x, mA); + return 0; } /* Context: can sleep */ static inline int -otg_set_suspend(struct usb_phy *x, int suspend) +usb_phy_set_suspend(struct usb_phy *x, int suspend) { if (x->set_suspend != NULL) return x->set_suspend(x, suspend); @@ -234,18 +275,21 @@ otg_set_suspend(struct usb_phy *x, int suspend) static inline int otg_start_srp(struct usb_phy *x) { + if (x->otg && x->otg->start_srp) + return x->otg->start_srp(x->otg); + return x->start_srp(x); } /* notifiers */ static inline int -otg_register_notifier(struct usb_phy *x, struct notifier_block *nb) +usb_register_notifier(struct usb_phy *x, struct notifier_block *nb) { return atomic_notifier_chain_register(&x->notifier, nb); } static inline void -otg_unregister_notifier(struct usb_phy *x, struct notifier_block *nb) +usb_unregister_notifier(struct usb_phy *x, struct notifier_block *nb) { atomic_notifier_chain_unregister(&x->notifier, nb); } @@ -253,4 +297,22 @@ otg_unregister_notifier(struct usb_phy *x, struct notifier_block *nb) /* for OTG controller drivers (and maybe other stuff) */ extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num); +/* Temporary aliases for transceiver functions */ +#define otg_set_transceiver(x) usb_set_transceiver(x) +#define otg_get_transceiver() usb_get_transceiver() +#define otg_put_transceiver(x) usb_put_transceiver(x) + +#define otg_io_read(x, a) usb_phy_io_read(x, a) +#define otg_io_write(x, a, b) usb_phy_io_write(x, a, b) + +#define otg_init(x) usb_phy_init(x) +#define otg_shutdown(x) usb_phy_shutdown(x) +#define otg_set_power(x, a) usb_phy_set_power(x, a) +#define otg_set_suspend(x, a) usb_phy_set_suspend(x, a) + +#define otg_register_notifier(x, a) usb_register_notifier(x, a) +#define otg_unregister_notifier(x, a) usb_unregiser_notifier(x, a) + +#define otg_io_access_ops usb_phy_io_ops + #endif /* __LINUX_USB_OTG_H */ -- cgit From 1d4c9293ae3555f2dcf9f394d1e2a14fd9421c4f Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Mon, 13 Feb 2012 13:24:09 +0200 Subject: usb: otg: msm: Start using struct usb_otg Use struct usb_otg members with OTG specific functions instead of usb_phy members. Signed-off-by: Heikki Krogerus Acked-by: Pavankumar Kondeti Reviewed-by: Marek Vasut Signed-off-by: Felipe Balbi --- include/linux/usb/msm_hsusb.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h index 2d3547ae9562..22a396c13f3a 100644 --- a/include/linux/usb/msm_hsusb.h +++ b/include/linux/usb/msm_hsusb.h @@ -160,7 +160,7 @@ struct msm_otg_platform_data { * detection process. */ struct msm_otg { - struct usb_phy otg; + struct usb_phy phy; struct msm_otg_platform_data *pdata; int irq; struct clk *clk; -- cgit From 298b083cf9dd2efd9bb7020107ab0077135051e0 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Mon, 13 Feb 2012 13:24:13 +0200 Subject: usb: otg: ulpi: Start using struct usb_otg Use struct usb_otg members with OTG specific functions instead of usb_phy members. Signed-off-by: Heikki Krogerus Acked-by: Igor Grinberg Acked-by: Sascha Hauer Reviewed-by: Marek Vasut Signed-off-by: Felipe Balbi --- include/linux/usb/ulpi.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb/ulpi.h b/include/linux/usb/ulpi.h index 51ebf72bc449..6f033a415ecb 100644 --- a/include/linux/usb/ulpi.h +++ b/include/linux/usb/ulpi.h @@ -181,12 +181,12 @@ /*-------------------------------------------------------------------------*/ -struct usb_phy *otg_ulpi_create(struct otg_io_access_ops *ops, +struct usb_phy *otg_ulpi_create(struct usb_phy_io_ops *ops, unsigned int flags); #ifdef CONFIG_USB_ULPI_VIEWPORT /* access ops for controllers with a viewport register */ -extern struct otg_io_access_ops ulpi_viewport_access_ops; +extern struct usb_phy_io_ops ulpi_viewport_access_ops; #endif #endif /* __LINUX_USB_ULPI_H */ -- cgit From 2fbb90db1b8fcc78f43830f1a009f3af243c5f42 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Tue, 7 Feb 2012 09:32:43 -0500 Subject: tracing/rcu: Add trace_##name##__rcuidle() static tracepoint for inside rcu_idle_exit() sections Added is a new static inline function that lets *any* tracepoint be used inside a rcu_idle_exit() section. And this also solves the problem where the same tracepoint may be used inside a rcu_idle_exit() section as well as outside of one. I added a new tracepoint function with a "_rcuidle" extension. All tracepoints can be used with either the normal "trace_foobar()" function, or the "trace_foobar_rcuidle()" function when inside a rcu_idle_exit() section. All tracepoints defined by TRACE_EVENT() or any of the derivatives will have a "_rcuidle()" function also defined. When a tracepoint is used within an rcu_idle_exit() section, the "_rcuidle()" version must be used. This denotes that the tracepoint is within rcu_idle_exit() and it allows the rcu read locks within the tracepoint to still be valid, as this version takes us out of rcu_idle_exit(). Another nice aspect about this patch is that "static inline"s are not compiled into text when not used. So only the tracepoints that actually use the _rcuidle() version will have them defined in the actual text that is booted. Link: http://lkml.kernel.org/r/1328563113.2200.39.camel@gandalf.stny.rr.com> Acked-by: Paul E. McKenney Reviewed-by: Josh Triplett Signed-off-by: Steven Rostedt --- include/linux/tracepoint.h | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h index df0a779c1bbd..fc36da97ff7e 100644 --- a/include/linux/tracepoint.h +++ b/include/linux/tracepoint.h @@ -114,7 +114,7 @@ static inline void tracepoint_synchronize_unregister(void) * as "(void *, void)". The DECLARE_TRACE_NOARGS() will pass in just * "void *data", where as the DECLARE_TRACE() will pass in "void *data, proto". */ -#define __DO_TRACE(tp, proto, args, cond) \ +#define __DO_TRACE(tp, proto, args, cond, prercu, postrcu) \ do { \ struct tracepoint_func *it_func_ptr; \ void *it_func; \ @@ -122,6 +122,7 @@ static inline void tracepoint_synchronize_unregister(void) \ if (!(cond)) \ return; \ + prercu; \ rcu_read_lock_sched_notrace(); \ it_func_ptr = rcu_dereference_sched((tp)->funcs); \ if (it_func_ptr) { \ @@ -132,6 +133,7 @@ static inline void tracepoint_synchronize_unregister(void) } while ((++it_func_ptr)->func); \ } \ rcu_read_unlock_sched_notrace(); \ + postrcu; \ } while (0) /* @@ -139,7 +141,7 @@ static inline void tracepoint_synchronize_unregister(void) * not add unwanted padding between the beginning of the section and the * structure. Force alignment to the same alignment as the section start. */ -#define __DECLARE_TRACE(name, proto, args, cond, data_proto, data_args) \ +#define __DECLARE_TRACE(name, proto, args, cond, data_proto, data_args) \ extern struct tracepoint __tracepoint_##name; \ static inline void trace_##name(proto) \ { \ @@ -147,7 +149,17 @@ static inline void tracepoint_synchronize_unregister(void) __DO_TRACE(&__tracepoint_##name, \ TP_PROTO(data_proto), \ TP_ARGS(data_args), \ - TP_CONDITION(cond)); \ + TP_CONDITION(cond),,); \ + } \ + static inline void trace_##name##_rcuidle(proto) \ + { \ + if (static_branch(&__tracepoint_##name.key)) \ + __DO_TRACE(&__tracepoint_##name, \ + TP_PROTO(data_proto), \ + TP_ARGS(data_args), \ + TP_CONDITION(cond), \ + rcu_idle_exit(), \ + rcu_idle_enter()); \ } \ static inline int \ register_trace_##name(void (*probe)(data_proto), void *data) \ @@ -190,9 +202,11 @@ static inline void tracepoint_synchronize_unregister(void) EXPORT_SYMBOL(__tracepoint_##name) #else /* !CONFIG_TRACEPOINTS */ -#define __DECLARE_TRACE(name, proto, args, cond, data_proto, data_args) \ +#define __DECLARE_TRACE(name, proto, args, cond, data_proto, data_args) \ static inline void trace_##name(proto) \ { } \ + static inline void trace_##name##_rcuidle(proto) \ + { } \ static inline int \ register_trace_##name(void (*probe)(data_proto), \ void *data) \ -- cgit From 4296c70a5ec316903ef037ed15f154dd3d354ad7 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Fri, 6 Jan 2012 10:34:31 -0800 Subject: USB/xHCI: Enable USB 3.0 hub remote wakeup. USB 3.0 hubs have a different remote wakeup policy than USB 2.0 hubs. USB 2.0 hubs, once they have remote wakeup enabled, will always send remote wakes when anything changes on a port. However, USB 3.0 hubs have a per-port remote wake up policy that is off by default. The Set Feature remote wake mask can be changed for any port, enabling remote wakeup for a connect, disconnect, or overcurrent event, much like EHCI and xHCI host controller "wake on" port status bits. The bits are cleared to zero on the initial hub power on, or after the hub has been reset. Without this patch, when a USB 3.0 hub gets suspended, it will not send a remote wakeup on device connect or disconnect. This would show up to the user as "dead ports" unless they ran lsusb -v (since newer versions of lsusb use the sysfs files, rather than sending control transfers). Change the hub driver's suspend method to enable remote wake up for disconnect, connect, and overcurrent for all ports on the hub. Modify the xHCI driver's roothub code to handle that request, and set the "wake on" bits in the port status registers accordingly. Signed-off-by: Sarah Sharp --- include/linux/usb/ch11.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb/ch11.h b/include/linux/usb/ch11.h index 0b83acd3360a..f1d26b6067f1 100644 --- a/include/linux/usb/ch11.h +++ b/include/linux/usb/ch11.h @@ -76,6 +76,11 @@ #define USB_PORT_FEAT_C_BH_PORT_RESET 29 #define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT 30 +/* USB 3.0 hub remote wake mask bits, see table 10-14 */ +#define USB_PORT_FEAT_REMOTE_WAKE_CONNECT (1 << 8) +#define USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT (1 << 9) +#define USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT (1 << 10) + /* * Hub Status and Hub Change results * See USB 2.0 spec Table 11-19 and Table 11-20 -- cgit From 4ee823b83bc9851743fab756c76b27d6a1e2472b Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Mon, 14 Nov 2011 18:00:01 -0800 Subject: USB/xHCI: Support device-initiated USB 3.0 resume. USB 3.0 hubs don't have a port suspend change bit (that bit is now reserved). Instead, when a host-initiated resume finishes, the hub sets the port link state change bit. When a USB 3.0 device initiates remote wakeup, the parent hubs with their upstream links in U3 will pass the LFPS up the chain. The first hub that has an upstream link in U0 (which may be the roothub) will reflect that LFPS back down the path to the device. However, the parent hubs in the resumed path will not set their link state change bit. Instead, the device that initiated the resume has to send an asynchronous "Function Wake" Device Notification up to the host controller. Therefore, we need a way to notify the USB core of a device resume without going through the normal hub URB completion method. First, make the xHCI roothub act like an external USB 3.0 hub and not pass up the port link state change bit when a device-initiated resume finishes. Introduce a new xHCI bit field, port_remote_wakeup, so that we can tell the difference between a port coming out of the U3Exit state (host-initiated resume) and the RExit state (ending state of device-initiated resume). Since the USB core can't tell whether a port on a hub has resumed by looking at the Hub Status buffer, we need to introduce a bitfield, wakeup_bits, that indicates which ports have resumed. When the xHCI driver notices a port finishing a device-initiated resume, we call into a new USB core function, usb_wakeup_notification(), that will set the right bit in wakeup_bits, and kick khubd for that hub. We also call usb_wakeup_notification() when the Function Wake Device Notification is received by the xHCI driver. This covers the case where the link between the roothub and the first-tier hub is in U0, and the hub reflects the resume signaling back to the device without giving any indication it has done so until the device sends the Function Wake notification. Change the code in khubd that handles the remote wakeup to look at the state the USB core thinks the device is in, and handle the remote wakeup if the port's wakeup bit is set. This patch only takes care of the case where the device is attached directly to the roothub, or the USB 3.0 hub that is attached to the root hub is the device sending the Function Wake Device Notification (e.g. because a new USB device was attached). The other cases will be covered in a second patch. Signed-off-by: Sarah Sharp --- include/linux/usb/hcd.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index b2f62f3a32af..2e6071efbfb7 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -412,6 +412,8 @@ extern irqreturn_t usb_hcd_irq(int irq, void *__hcd); extern void usb_hc_died(struct usb_hcd *hcd); extern void usb_hcd_poll_rh_status(struct usb_hcd *hcd); +extern void usb_wakeup_notification(struct usb_device *hdev, + unsigned int portnum); /* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */ #define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1) -- cgit From 0d4e1b2a7eb7f4db8b3dc1c7ef4b507040f87ded Mon Sep 17 00:00:00 2001 From: Jassi Brar Date: Thu, 2 Feb 2012 22:00:48 +0530 Subject: usb: uac2: Add ACHeader and FormatType descriptor Add missing, but needed, ACHeader and FormatType descriptor definitions. Signed-off-by: Yadi Brar Signed-off-by: Jassi Brar Signed-off-by: Felipe Balbi --- include/linux/usb/audio-v2.h | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb/audio-v2.h b/include/linux/usb/audio-v2.h index 964cb603f7c7..ed13053153f4 100644 --- a/include/linux/usb/audio-v2.h +++ b/include/linux/usb/audio-v2.h @@ -43,6 +43,27 @@ static inline bool uac2_control_is_writeable(u32 bmControls, u8 control) return (bmControls >> (control * 2)) & 0x2; } +/* 4.7.2 Class-Specific AC Interface Descriptor */ +struct uac2_ac_header_descriptor { + __u8 bLength; /* 9 */ + __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ + __u8 bDescriptorSubtype; /* UAC_MS_HEADER */ + __le16 bcdADC; /* 0x0200 */ + __u8 bCategory; + __le16 wTotalLength; /* includes Unit and Terminal desc. */ + __u8 bmControls; +} __packed; + +/* 2.3.1.6 Type I Format Type Descriptor (Frmts20 final.pdf)*/ +struct uac2_format_type_i_descriptor { + __u8 bLength; /* in bytes: 6 */ + __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ + __u8 bDescriptorSubtype; /* FORMAT_TYPE */ + __u8 bFormatType; /* FORMAT_TYPE_1 */ + __u8 bSubslotSize; /* {1,2,3,4} */ + __u8 bBitResolution; +} __packed; + /* 4.7.2.1 Clock Source Descriptor */ struct uac_clock_source_descriptor { -- cgit From d705ae6b133f9f6a8beee617b1224b6a5c99c5da Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 15 Feb 2012 09:45:49 +0100 Subject: block: replace icq->changed with icq->flags icq->changed was used for ICQ_*_CHANGED bits. Rename it to flags and access it under ioc->lock instead of using atomic bitops. ioc_get_changed() is added so that the changed part can be fetched and cleared as before. icq->flags will be used to carry other flags. Signed-off-by: Tejun Heo Tested-by: Shaohua Li Signed-off-by: Jens Axboe --- include/linux/iocontext.h | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h index 119773eebe31..17839c7b9614 100644 --- a/include/linux/iocontext.h +++ b/include/linux/iocontext.h @@ -6,8 +6,10 @@ #include enum { - ICQ_IOPRIO_CHANGED, - ICQ_CGROUP_CHANGED, + ICQ_IOPRIO_CHANGED = 1 << 0, + ICQ_CGROUP_CHANGED = 1 << 1, + + ICQ_CHANGED_MASK = ICQ_IOPRIO_CHANGED | ICQ_CGROUP_CHANGED, }; /* @@ -88,7 +90,7 @@ struct io_cq { struct rcu_head __rcu_head; }; - unsigned long changed; + unsigned int flags; }; /* @@ -139,6 +141,7 @@ struct io_context *get_task_io_context(struct task_struct *task, gfp_t gfp_flags, int node); void ioc_ioprio_changed(struct io_context *ioc, int ioprio); void ioc_cgroup_changed(struct io_context *ioc); +unsigned int icq_get_changed(struct io_cq *icq); #else struct io_context; static inline void put_io_context(struct io_context *ioc) { } -- cgit From 621032ad6eaabf2fe771c4fa0d8f58e1fcfcdba6 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 15 Feb 2012 09:45:53 +0100 Subject: block: exit_io_context() should call elevator_exit_icq_fn() While updating locking, b2efa05265 "block, cfq: unlink cfq_io_context's immediately" moved elevator_exit_icq_fn() invocation from exit_io_context() to the final ioc put. While this doesn't cause catastrophic failure, it effectively removes task exit notification to elevator and cause noticeable IO performance degradation with CFQ. On task exit, CFQ used to immediately expire the slice if it was being used by the exiting task as no more IO would be issued by the task; however, after b2efa05265, the notification is lost and disk could sit idle needlessly, leading to noticeable IO performance degradation for certain workloads. This patch renames ioc_exit_icq() to ioc_destroy_icq(), separates elevator_exit_icq_fn() invocation into ioc_exit_icq() and invokes it from exit_io_context(). ICQ_EXITED flag is added to avoid invoking the callback more than once for the same icq. Walking icq_list from ioc side and invoking elevator callback requires reverse double locking. This may be better implemented using RCU; unfortunately, using RCU isn't trivial. e.g. RCU protection would need to cover request_queue and queue_lock switch on cleanup makes grabbing queue_lock from RCU unsafe. Reverse double locking should do, at least for now. Signed-off-by: Tejun Heo Reported-and-bisected-by: Shaohua Li LKML-Reference: Tested-by: Shaohua Li Signed-off-by: Jens Axboe --- include/linux/iocontext.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h index 17839c7b9614..1a3018063034 100644 --- a/include/linux/iocontext.h +++ b/include/linux/iocontext.h @@ -8,6 +8,7 @@ enum { ICQ_IOPRIO_CHANGED = 1 << 0, ICQ_CGROUP_CHANGED = 1 << 1, + ICQ_EXITED = 1 << 2, ICQ_CHANGED_MASK = ICQ_IOPRIO_CHANGED | ICQ_CGROUP_CHANGED, }; -- cgit From 150647fb2c313d7c5184fca3fa0829a4a7d6f7bc Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Wed, 15 Feb 2012 17:54:56 +0000 Subject: net: sh_eth: change the condition of initialization The SH7757 has 2 Fast Ethernet and 2 Gigabit Ethernet, and the first Gigabit channel needs the initialization. So, this patch adds the parameter of "needs_init", and if the sh_eth_plat_data is set it to 1, the driver will initialize the channel. Signed-off-by: Yoshihiro Shimoda Signed-off-by: David S. Miller --- include/linux/sh_eth.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/sh_eth.h b/include/linux/sh_eth.h index 2076acf8294d..b17d765ded84 100644 --- a/include/linux/sh_eth.h +++ b/include/linux/sh_eth.h @@ -20,6 +20,7 @@ struct sh_eth_plat_data { unsigned char mac_addr[6]; unsigned no_ether_link:1; unsigned ether_link_active_low:1; + unsigned needs_init:1; }; #endif -- cgit From e248491ac283b516958ca9ab62c8e74b6718bca8 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Wed, 15 Feb 2012 15:51:48 +0100 Subject: ftrace: Add enable/disable ftrace_ops control interface Adding a way to temporarily enable/disable ftrace_ops. The change follows the same way as 'global' ftrace_ops are done. Introducing 2 global ftrace_ops - control_ops and ftrace_control_list which take over all ftrace_ops registered with FTRACE_OPS_FL_CONTROL flag. In addition new per cpu flag called 'disabled' is also added to ftrace_ops to provide the control information for each cpu. When ftrace_ops with FTRACE_OPS_FL_CONTROL is registered, it is set as disabled for all cpus. The ftrace_control_list contains all the registered 'control' ftrace_ops. The control_ops provides function which iterates ftrace_control_list and does the check for 'disabled' flag on current cpu. Adding 3 inline functions: ftrace_function_local_disable/ftrace_function_local_enable - enable/disable the ftrace_ops on current cpu ftrace_function_local_disabled - get disabled ftrace_ops::disabled value for current cpu Link: http://lkml.kernel.org/r/1329317514-8131-2-git-send-email-jolsa@redhat.com Acked-by: Frederic Weisbecker Signed-off-by: Jiri Olsa Signed-off-by: Steven Rostedt --- include/linux/ftrace.h | 66 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 66 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index f33fb3b041c6..64a309d2fbd6 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -31,16 +31,33 @@ ftrace_enable_sysctl(struct ctl_table *table, int write, typedef void (*ftrace_func_t)(unsigned long ip, unsigned long parent_ip); +/* + * FTRACE_OPS_FL_* bits denote the state of ftrace_ops struct and are + * set in the flags member. + * + * ENABLED - set/unset when ftrace_ops is registered/unregistered + * GLOBAL - set manualy by ftrace_ops user to denote the ftrace_ops + * is part of the global tracers sharing the same filter + * via set_ftrace_* debugfs files. + * DYNAMIC - set when ftrace_ops is registered to denote dynamically + * allocated ftrace_ops which need special care + * CONTROL - set manualy by ftrace_ops user to denote the ftrace_ops + * could be controled by following calls: + * ftrace_function_local_enable + * ftrace_function_local_disable + */ enum { FTRACE_OPS_FL_ENABLED = 1 << 0, FTRACE_OPS_FL_GLOBAL = 1 << 1, FTRACE_OPS_FL_DYNAMIC = 1 << 2, + FTRACE_OPS_FL_CONTROL = 1 << 3, }; struct ftrace_ops { ftrace_func_t func; struct ftrace_ops *next; unsigned long flags; + int __percpu *disabled; #ifdef CONFIG_DYNAMIC_FTRACE struct ftrace_hash *notrace_hash; struct ftrace_hash *filter_hash; @@ -97,6 +114,55 @@ int register_ftrace_function(struct ftrace_ops *ops); int unregister_ftrace_function(struct ftrace_ops *ops); void clear_ftrace_function(void); +/** + * ftrace_function_local_enable - enable controlled ftrace_ops on current cpu + * + * This function enables tracing on current cpu by decreasing + * the per cpu control variable. + * It must be called with preemption disabled and only on ftrace_ops + * registered with FTRACE_OPS_FL_CONTROL. If called without preemption + * disabled, this_cpu_ptr will complain when CONFIG_DEBUG_PREEMPT is enabled. + */ +static inline void ftrace_function_local_enable(struct ftrace_ops *ops) +{ + if (WARN_ON_ONCE(!(ops->flags & FTRACE_OPS_FL_CONTROL))) + return; + + (*this_cpu_ptr(ops->disabled))--; +} + +/** + * ftrace_function_local_disable - enable controlled ftrace_ops on current cpu + * + * This function enables tracing on current cpu by decreasing + * the per cpu control variable. + * It must be called with preemption disabled and only on ftrace_ops + * registered with FTRACE_OPS_FL_CONTROL. If called without preemption + * disabled, this_cpu_ptr will complain when CONFIG_DEBUG_PREEMPT is enabled. + */ +static inline void ftrace_function_local_disable(struct ftrace_ops *ops) +{ + if (WARN_ON_ONCE(!(ops->flags & FTRACE_OPS_FL_CONTROL))) + return; + + (*this_cpu_ptr(ops->disabled))++; +} + +/** + * ftrace_function_local_disabled - returns ftrace_ops disabled value + * on current cpu + * + * This function returns value of ftrace_ops::disabled on current cpu. + * It must be called with preemption disabled and only on ftrace_ops + * registered with FTRACE_OPS_FL_CONTROL. If called without preemption + * disabled, this_cpu_ptr will complain when CONFIG_DEBUG_PREEMPT is enabled. + */ +static inline int ftrace_function_local_disabled(struct ftrace_ops *ops) +{ + WARN_ON_ONCE(!(ops->flags & FTRACE_OPS_FL_CONTROL)); + return *this_cpu_ptr(ops->disabled); +} + extern void ftrace_stub(unsigned long a0, unsigned long a1); #else /* !CONFIG_FUNCTION_TRACER */ -- cgit From ceec0b6fc7cd43b38a40c2d40223f9cd0616f0cd Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Wed, 15 Feb 2012 15:51:49 +0100 Subject: ftrace, perf: Add open/close tracepoint perf registration actions Adding TRACE_REG_PERF_OPEN and TRACE_REG_PERF_CLOSE to differentiate register/unregister from open/close actions. The register/unregister actions are invoked for the first/last tracepoint user when opening/closing the event. The open/close actions are invoked for each tracepoint user when opening/closing the event. Link: http://lkml.kernel.org/r/1329317514-8131-3-git-send-email-jolsa@redhat.com Acked-by: Frederic Weisbecker Signed-off-by: Jiri Olsa Signed-off-by: Steven Rostedt --- include/linux/ftrace_event.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h index c3da42dd22ba..195e3606ddd7 100644 --- a/include/linux/ftrace_event.h +++ b/include/linux/ftrace_event.h @@ -146,6 +146,8 @@ enum trace_reg { TRACE_REG_UNREGISTER, TRACE_REG_PERF_REGISTER, TRACE_REG_PERF_UNREGISTER, + TRACE_REG_PERF_OPEN, + TRACE_REG_PERF_CLOSE, }; struct ftrace_event_call; @@ -157,7 +159,7 @@ struct ftrace_event_class { void *perf_probe; #endif int (*reg)(struct ftrace_event_call *event, - enum trace_reg type); + enum trace_reg type, void *data); int (*define_fields)(struct ftrace_event_call *); struct list_head *(*get_fields)(struct ftrace_event_call *); struct list_head fields; @@ -165,7 +167,7 @@ struct ftrace_event_class { }; extern int ftrace_event_reg(struct ftrace_event_call *event, - enum trace_reg type); + enum trace_reg type, void *data); enum { TRACE_EVENT_FL_ENABLED_BIT, -- cgit From 489c75c3b333dfda4c8d2b7ad1b00e5da024bfa7 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Wed, 15 Feb 2012 15:51:50 +0100 Subject: ftrace, perf: Add add/del tracepoint perf registration actions Adding TRACE_REG_PERF_ADD and TRACE_REG_PERF_DEL to handle perf event schedule in/out actions. The add action is invoked for when the perf event is scheduled in, while the del action is invoked when the event is scheduled out. Link: http://lkml.kernel.org/r/1329317514-8131-4-git-send-email-jolsa@redhat.com Acked-by: Frederic Weisbecker Signed-off-by: Jiri Olsa Signed-off-by: Steven Rostedt --- include/linux/ftrace_event.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h index 195e3606ddd7..2bf677cb2d6f 100644 --- a/include/linux/ftrace_event.h +++ b/include/linux/ftrace_event.h @@ -148,6 +148,8 @@ enum trace_reg { TRACE_REG_PERF_UNREGISTER, TRACE_REG_PERF_OPEN, TRACE_REG_PERF_CLOSE, + TRACE_REG_PERF_ADD, + TRACE_REG_PERF_DEL, }; struct ftrace_event_call; -- cgit From ced39002f5ea736b716ae233fb68b26d59783912 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Wed, 15 Feb 2012 15:51:52 +0100 Subject: ftrace, perf: Add support to use function tracepoint in perf Adding perf registration support for the ftrace function event, so it is now possible to register it via perf interface. The perf_event struct statically contains ftrace_ops as a handle for function tracer. The function tracer is registered/unregistered in open/close actions. To be efficient, we enable/disable ftrace_ops each time the traced process is scheduled in/out (via TRACE_REG_PERF_(ADD|DELL) handlers). This way tracing is enabled only when the process is running. Intentionally using this way instead of the event's hw state PERF_HES_STOPPED, which would not disable the ftrace_ops. It is now possible to use function trace within perf commands like: perf record -e ftrace:function ls perf stat -e ftrace:function ls Allowed only for root. Link: http://lkml.kernel.org/r/1329317514-8131-6-git-send-email-jolsa@redhat.com Acked-by: Frederic Weisbecker Signed-off-by: Jiri Olsa Signed-off-by: Steven Rostedt --- include/linux/perf_event.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 412b790f5da6..92a056f6d18d 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -859,6 +859,9 @@ struct perf_event { #ifdef CONFIG_EVENT_TRACING struct ftrace_event_call *tp_event; struct event_filter *filter; +#ifdef CONFIG_FUNCTION_TRACER + struct ftrace_ops ftrace_ops; +#endif #endif #ifdef CONFIG_CGROUP_PERF -- cgit From 02aa3162edaa166a01d193f80ccde890be8b55da Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Wed, 15 Feb 2012 15:51:53 +0100 Subject: ftrace: Allow to specify filter field type for ftrace events Adding FILTER_TRACE_FN event field type for function tracepoint event, so it can be properly recognized within filtering code. Currently all fields of ftrace subsystem events share the common field type FILTER_OTHER. Since the function trace fields need special care within the filtering code we need to recognize it properly, hence adding the FILTER_TRACE_FN event type. Adding filter parameter to the FTRACE_ENTRY macro, to specify the filter field type for the event. Link: http://lkml.kernel.org/r/1329317514-8131-7-git-send-email-jolsa@redhat.com Signed-off-by: Jiri Olsa Signed-off-by: Steven Rostedt --- include/linux/ftrace_event.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h index 2bf677cb2d6f..dd478fc8f9f5 100644 --- a/include/linux/ftrace_event.h +++ b/include/linux/ftrace_event.h @@ -245,6 +245,7 @@ enum { FILTER_STATIC_STRING, FILTER_DYN_STRING, FILTER_PTR_STRING, + FILTER_TRACE_FN, }; #define EVENT_STORAGE_SIZE 128 -- cgit From 5500fa51199aee770ce53718853732600543619e Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Wed, 15 Feb 2012 15:51:54 +0100 Subject: ftrace, perf: Add filter support for function trace event Adding support to filter function trace event via perf interface. It is now possible to use filter interface in the perf tool like: perf record -e ftrace:function --filter="(ip == mm_*)" ls The filter syntax is restricted to the the 'ip' field only, and following operators are accepted '==' '!=' '||', ending up with the filter strings like: ip == f1[, ]f2 ... || ip != f3[, ]f4 ... with comma ',' or space ' ' as a function separator. If the space ' ' is used as a separator, the right side of the assignment needs to be enclosed in double quotes '"', e.g.: perf record -e ftrace:function --filter '(ip == do_execve,sys_*,ext*)' ls perf record -e ftrace:function --filter '(ip == "do_execve,sys_*,ext*")' ls perf record -e ftrace:function --filter '(ip == "do_execve sys_* ext*")' ls The '==' operator adds trace filter with same effect as would be added via set_ftrace_filter file. The '!=' operator adds trace filter with same effect as would be added via set_ftrace_notrace file. The right side of the '!=', '==' operators is list of functions or regexp. to be added to filter separated by space. The '||' operator is used for connecting multiple filter definitions together. It is possible to have more than one '==' and '!=' operators within one filter string. Link: http://lkml.kernel.org/r/1329317514-8131-8-git-send-email-jolsa@redhat.com Signed-off-by: Jiri Olsa Signed-off-by: Steven Rostedt --- include/linux/ftrace.h | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index 64a309d2fbd6..72a6cabb4d5b 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -250,6 +250,7 @@ int ftrace_set_notrace(struct ftrace_ops *ops, unsigned char *buf, int len, int reset); void ftrace_set_global_filter(unsigned char *buf, int len, int reset); void ftrace_set_global_notrace(unsigned char *buf, int len, int reset); +void ftrace_free_filter(struct ftrace_ops *ops); int register_ftrace_command(struct ftrace_func_command *cmd); int unregister_ftrace_command(struct ftrace_func_command *cmd); @@ -380,9 +381,6 @@ extern void ftrace_enable_daemon(void); #else static inline int skip_trace(unsigned long ip) { return 0; } static inline int ftrace_force_update(void) { return 0; } -static inline void ftrace_set_filter(unsigned char *buf, int len, int reset) -{ -} static inline void ftrace_disable_daemon(void) { } static inline void ftrace_enable_daemon(void) { } static inline void ftrace_release_mod(struct module *mod) {} @@ -406,6 +404,9 @@ static inline int ftrace_text_reserved(void *start, void *end) */ #define ftrace_regex_open(ops, flag, inod, file) ({ -ENODEV; }) #define ftrace_set_early_filter(ops, buf, enable) do { } while (0) +#define ftrace_set_filter(ops, buf, len, reset) ({ -ENODEV; }) +#define ftrace_set_notrace(ops, buf, len, reset) ({ -ENODEV; }) +#define ftrace_free_filter(ops) do { } while (0) static inline ssize_t ftrace_filter_write(struct file *file, const char __user *ubuf, size_t cnt, loff_t *ppos) { return -ENODEV; } -- cgit From 18fec7d8758dd416904da205375e6fa667defc80 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Wed, 4 Jan 2012 11:44:57 -0800 Subject: rcu: Improve synchronize_rcu() diagnostics Although TREE_PREEMPT_RCU indirectly uses might_sleep() to detect illegal use of synchronize_sched() and synchronize_rcu_bh() from within an RCU read-side critical section, this might_sleep() check is bypassed when there is only a single CPU (for example, when running an SMP kernel on a single-CPU system). This patch therefore adds a might_sleep() call to the rcu_blocking_is_gp() check that is unconditionally invoked from both synchronize_sched() and synchronize_rcu_bh(). Signed-off-by: Frederic Weisbecker Signed-off-by: Paul E. McKenney --- include/linux/rcutree.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h index 67458468f1a8..73e7195f9997 100644 --- a/include/linux/rcutree.h +++ b/include/linux/rcutree.h @@ -83,6 +83,7 @@ extern void rcu_sched_force_quiescent_state(void); /* A context switch is a grace period for RCU-sched and RCU-bh. */ static inline int rcu_blocking_is_gp(void) { + might_sleep(); /* Check for RCU read-side critical section. */ return num_online_cpus() == 1; } -- cgit From 486e259340fc4c60474f2c14703e3b3634bb58ca Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Fri, 6 Jan 2012 14:11:30 -0800 Subject: rcu: Avoid waking up CPUs having only kfree_rcu() callbacks When CONFIG_RCU_FAST_NO_HZ is enabled, RCU will allow a given CPU to enter dyntick-idle mode even if it still has RCU callbacks queued. RCU avoids system hangs in this case by scheduling a timer for several jiffies in the future. However, if all of the callbacks on that CPU are from kfree_rcu(), there is no reason to wake the CPU up, as it is not a problem to defer freeing of memory. This commit therefore tracks the number of callbacks on a given CPU that are from kfree_rcu(), and avoids scheduling the timer if all of a given CPU's callbacks are from kfree_rcu(). Signed-off-by: Paul E. McKenney Signed-off-by: Paul E. McKenney --- include/linux/rcupdate.h | 2 +- include/linux/rcutiny.h | 6 ++++++ include/linux/rcutree.h | 2 ++ 3 files changed, 9 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 81c04f4348ec..a67d5f1072ea 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -841,7 +841,7 @@ void __kfree_rcu(struct rcu_head *head, unsigned long offset) /* See the kfree_rcu() header comment. */ BUILD_BUG_ON(!__is_kfree_rcu_offset(offset)); - call_rcu(head, (rcu_callback)offset); + kfree_call_rcu(head, (rcu_callback)offset); } /** diff --git a/include/linux/rcutiny.h b/include/linux/rcutiny.h index 00b7a5e493d2..51bf29c81485 100644 --- a/include/linux/rcutiny.h +++ b/include/linux/rcutiny.h @@ -83,6 +83,12 @@ static inline void synchronize_sched_expedited(void) synchronize_sched(); } +static inline void kfree_call_rcu(struct rcu_head *head, + void (*func)(struct rcu_head *rcu)) +{ + call_rcu(head, func); +} + #ifdef CONFIG_TINY_RCU static inline void rcu_preempt_note_context_switch(void) diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h index 73e7195f9997..73892483fd05 100644 --- a/include/linux/rcutree.h +++ b/include/linux/rcutree.h @@ -61,6 +61,8 @@ extern void synchronize_rcu_bh(void); extern void synchronize_sched_expedited(void); extern void synchronize_rcu_expedited(void); +void kfree_call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu)); + static inline void synchronize_rcu_bh_expedited(void) { synchronize_sched_expedited(); -- cgit From 768dfffdffbfcc07d6927bdd642c714c0dd64c99 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Wed, 11 Jan 2012 16:33:17 -0800 Subject: rcu: Prevent RCU callbacks from executing before scheduler initialized This is a port of commit #b0d3041 from TREE_RCU to TREE_PREEMPT_RCU. Under some rare but real combinations of configuration parameters, RCU callbacks are posted during early boot that use kernel facilities that are not yet initialized. Therefore, when these callbacks are invoked, hard hangs and crashes ensue. This commit therefore prevents RCU callbacks from being invoked until after the scheduler is fully up and running, as in after multiple tasks have been spawned. It might well turn out that a better approach is to identify the specific RCU callbacks that are causing this problem, but that discussion will wait until such time as someone really needs an RCU callback to be invoked (as opposed to merely registered) during early boot. Signed-off-by: Paul E. McKenney Signed-off-by: Paul E. McKenney --- include/linux/rcutiny.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/rcutiny.h b/include/linux/rcutiny.h index 51bf29c81485..e93df77176d1 100644 --- a/include/linux/rcutiny.h +++ b/include/linux/rcutiny.h @@ -27,13 +27,9 @@ #include -#ifdef CONFIG_RCU_BOOST static inline void rcu_init(void) { } -#else /* #ifdef CONFIG_RCU_BOOST */ -void rcu_init(void); -#endif /* #else #ifdef CONFIG_RCU_BOOST */ static inline void rcu_barrier_bh(void) { -- cgit From 1aa03f1188f7b0b85df2de602b33ee7b6fab8e00 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Wed, 11 Jan 2012 17:25:17 -0800 Subject: rcu: Simplify unboosting checks This is a port of commit #82e78d80 from TREE_PREEMPT_RCU to TINY_PREEMPT_RCU. This commit uses the fact that current->rcu_boost_mutex is set any time that the RCU_READ_UNLOCK_BOOSTED flag is set in the current->rcu_read_unlock_special bitmask. This allows tests of the bit to be changed to tests of the pointer, which in turn allows the RCU_READ_UNLOCK_BOOSTED flag to be eliminated. Please note that the check of current->rcu_read_unlock_special need not change because any time that RCU_READ_UNLOCK_BOOSTED was set, so was RCU_READ_UNLOCK_BLOCKED. Therefore, __rcu_read_unlock() can continue testing current->rcu_read_unlock_special for non-zero, as before. Signed-off-by: Paul E. McKenney Signed-off-by: Paul E. McKenney --- include/linux/sched.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index 7d379a6bfd88..e692abaf915a 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1864,8 +1864,7 @@ extern void task_clear_jobctl_pending(struct task_struct *task, #ifdef CONFIG_PREEMPT_RCU #define RCU_READ_UNLOCK_BLOCKED (1 << 0) /* blocked while in RCU read-side. */ -#define RCU_READ_UNLOCK_BOOSTED (1 << 1) /* boosted while in RCU read-side. */ -#define RCU_READ_UNLOCK_NEED_QS (1 << 2) /* RCU core needs CPU response. */ +#define RCU_READ_UNLOCK_NEED_QS (1 << 1) /* RCU core needs CPU response. */ static inline void rcu_copy_process(struct task_struct *p) { -- cgit From 50406b98b6372e7de21d903d2cf3914e9d64e094 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Thu, 12 Jan 2012 13:49:19 -0800 Subject: rcu: Make rcu_sleep_check() also check rcu_lock_map Although it is OK to be preempted in an RCU read-side critical section for TREE_PREEMPT_RCU, it is definitely not OK to be preempted, block, or might_sleep() within an RCU read-side critical section for TREE_RCU. Unfortunately, rcu_might_sleep() currently only checks for RCU-bh and RCU-sched read-side critical sections. This commit therefore makes rcu_might_sleep() check for RCU read-side critical sections, but only in TREE_RCU builds. Signed-off-by: Paul E. McKenney Signed-off-by: Paul E. McKenney --- include/linux/rcupdate.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'include/linux') diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index a67d5f1072ea..6df0ae197810 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -381,8 +381,22 @@ extern int rcu_my_thread_group_empty(void); } \ } while (0) +#if defined(CONFIG_PROVE_RCU) && !defined(CONFIG_PREEMPT_RCU) +static inline void rcu_preempt_sleep_check(void) +{ + rcu_lockdep_assert(!lock_is_held(&rcu_lock_map), + "Illegal context switch in RCU read-side " + "critical section"); +} +#else /* #ifdef CONFIG_PROVE_RCU */ +static inline void rcu_preempt_sleep_check(void) +{ +} +#endif /* #else #ifdef CONFIG_PROVE_RCU */ + #define rcu_sleep_check() \ do { \ + rcu_preempt_sleep_check(); \ rcu_lockdep_assert(!lock_is_held(&rcu_bh_lock_map), \ "Illegal context switch in RCU-bh" \ " read-side critical section"); \ -- cgit From 5e1ee6e1016763812018bf5c5e966992821dc47e Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Thu, 12 Jan 2012 17:21:20 -0800 Subject: rcu: Note that rcu_access_pointer() can be used for teardown There is no convenient expression for rcu_deference_protected() when it is used in tearing down multilinked structures following a grace period. For example, suppose that an element containing an RCU-protected pointer to a second element is removed from an enclosing RCU-protected data structure, then the write-side lock is released, and finally synchronize_rcu() is invoked to wait for a grace period. Then it is necessary to traverse the pointer in order to free up the second element. But we are not in an RCU read-side critical section and we are holding no locks, so the usual rcu_dereference_check() and rcu_dereference_protected() primitives are not appropriate. Neither is rcu_dereference_raw(), as it is intended for use in data structures where the user defines the locking design (for example, list_head). So this responsibility is added to rcu_access_pointer()'s list, and this commit updates rcu_assign_pointer()'s header comment accordingly. Suggested-by: David Howells Signed-off-by: Paul E. McKenney Acked-by: David Howells --- include/linux/rcupdate.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 6df0ae197810..f409529ff35a 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -484,6 +484,13 @@ static inline void rcu_preempt_sleep_check(void) * NULL. Although rcu_access_pointer() may also be used in cases where * update-side locks prevent the value of the pointer from changing, you * should instead use rcu_dereference_protected() for this use case. + * + * It is also permissible to use rcu_access_pointer() when read-side + * access to the pointer was removed at least one grace period ago, as + * is the case in the context of the RCU callback that is freeing up + * the data, or after a synchronize_rcu() returns. This can be useful + * when tearing down multi-linked structures after a grace period + * has elapsed. */ #define rcu_access_pointer(p) __rcu_access_pointer((p), __rcu) -- cgit From c0d6d01bffdce19fa19baad6cb8cc3eed7bfd6f5 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Mon, 23 Jan 2012 12:41:26 -0800 Subject: rcu: Check for illegal use of RCU from offlined CPUs Although it is legal to use RCU during early boot, it is anything but legal to use RCU at runtime from an offlined CPU. After all, RCU explicitly ignores offlined CPUs. This commit therefore adds checks for runtime use of RCU from offlined CPUs. These checks are not perfect, in particular, they can be subverted through use of things like rcu_dereference_raw(). Note that it is not possible to put checks in rcu_read_lock() and friends due to the fact that these primitives are used in code that might be used under either RCU or lock-based protection, which means that checking rcu_read_lock() gets you fat piles of false positives. Signed-off-by: Paul E. McKenney Signed-off-by: Paul E. McKenney --- include/linux/rcupdate.h | 19 +++++++++++++++++++ include/linux/srcu.h | 11 +++++++---- 2 files changed, 26 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index f409529ff35a..146d37d31778 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -226,6 +226,15 @@ static inline void destroy_rcu_head_on_stack(struct rcu_head *head) } #endif /* #else !CONFIG_DEBUG_OBJECTS_RCU_HEAD */ +#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PROVE_RCU) +bool rcu_lockdep_current_cpu_online(void); +#else /* #if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PROVE_RCU) */ +static inline bool rcu_lockdep_current_cpu_online(void) +{ + return 1; +} +#endif /* #else #if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PROVE_RCU) */ + #ifdef CONFIG_DEBUG_LOCK_ALLOC #ifdef CONFIG_PROVE_RCU @@ -270,6 +279,9 @@ extern int debug_lockdep_rcu_enabled(void); * occur in the same context, for example, it is illegal to invoke * rcu_read_unlock() in process context if the matching rcu_read_lock() * was invoked from within an irq handler. + * + * Note that rcu_read_lock() is disallowed if the CPU is either idle or + * offline from an RCU perspective, so check for those as well. */ static inline int rcu_read_lock_held(void) { @@ -277,6 +289,8 @@ static inline int rcu_read_lock_held(void) return 1; if (rcu_is_cpu_idle()) return 0; + if (!rcu_lockdep_current_cpu_online()) + return 0; return lock_is_held(&rcu_lock_map); } @@ -313,6 +327,9 @@ extern int rcu_read_lock_bh_held(void); * notice an extended quiescent state to other CPUs that started a grace * period. Otherwise we would delay any grace period as long as we run in * the idle task. + * + * Similarly, we avoid claiming an SRCU read lock held if the current + * CPU is offline. */ #ifdef CONFIG_PREEMPT_COUNT static inline int rcu_read_lock_sched_held(void) @@ -323,6 +340,8 @@ static inline int rcu_read_lock_sched_held(void) return 1; if (rcu_is_cpu_idle()) return 0; + if (!rcu_lockdep_current_cpu_online()) + return 0; if (debug_locks) lockdep_opinion = lock_is_held(&rcu_sched_lock_map); return lockdep_opinion || preempt_count() != 0 || irqs_disabled(); diff --git a/include/linux/srcu.h b/include/linux/srcu.h index e1b005918bbb..9a323728e60c 100644 --- a/include/linux/srcu.h +++ b/include/linux/srcu.h @@ -99,15 +99,18 @@ long srcu_batches_completed(struct srcu_struct *sp); * power mode. This way we can notice an extended quiescent state to * other CPUs that started a grace period. Otherwise we would delay any * grace period as long as we run in the idle task. + * + * Similarly, we avoid claiming an SRCU read lock held if the current + * CPU is offline. */ static inline int srcu_read_lock_held(struct srcu_struct *sp) { - if (rcu_is_cpu_idle()) - return 0; - if (!debug_lockdep_rcu_enabled()) return 1; - + if (rcu_is_cpu_idle()) + return 0; + if (!rcu_lockdep_current_cpu_online()) + return 0; return lock_is_held(&sp->dep_map); } -- cgit From 236fefafe5d3d34b78ed2ccf5510909716112326 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Tue, 31 Jan 2012 14:00:41 -0800 Subject: rcu: Call out dangers of expedited RCU primitives The expedited RCU primitives can be quite useful, but they have some high costs as well. This commit updates and creates docbook comments calling out the costs, and updates the RCU documentation as well. Signed-off-by: Paul E. McKenney --- include/linux/rcutree.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'include/linux') diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h index 73892483fd05..e8ee5dd0854c 100644 --- a/include/linux/rcutree.h +++ b/include/linux/rcutree.h @@ -63,6 +63,22 @@ extern void synchronize_rcu_expedited(void); void kfree_call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu)); +/** + * synchronize_rcu_bh_expedited - Brute-force RCU-bh grace period + * + * Wait for an RCU-bh grace period to elapse, but use a "big hammer" + * approach to force the grace period to end quickly. This consumes + * significant time on all CPUs and is unfriendly to real-time workloads, + * so is thus not recommended for any sort of common-case code. In fact, + * if you are using synchronize_rcu_bh_expedited() in a loop, please + * restructure your code to batch your updates, and then use a single + * synchronize_rcu_bh() instead. + * + * Note that it is illegal to call this function while holding any lock + * that is acquired by a CPU-hotplug notifier. And yes, it is also illegal + * to call this function from a CPU-hotplug notifier. Failing to observe + * these restriction will result in deadlock. + */ static inline void synchronize_rcu_bh_expedited(void) { synchronize_sched_expedited(); -- cgit From bde23c6892878e48f64de668660778991bc2fb56 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 1 Feb 2012 10:30:46 -0800 Subject: rcu: Convert WARN_ON_ONCE() in rcu_lock_acquire() to lockdep The WARN_ON_ONCE() in rcu_lock_acquire() results in infinite recursion on S390, and also doesn't print very much information. Remove this. Updated patch to add lockdep-RCU assertions to RCU's read-side primitives. Signed-off-by: Heiko Carstens Signed-off-by: Paul E. McKenney --- include/linux/rcupdate.h | 14 ++++++++++++-- include/linux/srcu.h | 4 ++++ 2 files changed, 16 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 146d37d31778..6ee663c8745a 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -248,13 +248,11 @@ static inline int rcu_is_cpu_idle(void) static inline void rcu_lock_acquire(struct lockdep_map *map) { - WARN_ON_ONCE(rcu_is_cpu_idle()); lock_acquire(map, 0, 0, 2, 1, NULL, _THIS_IP_); } static inline void rcu_lock_release(struct lockdep_map *map) { - WARN_ON_ONCE(rcu_is_cpu_idle()); lock_release(map, 1, _THIS_IP_); } @@ -699,6 +697,8 @@ static inline void rcu_read_lock(void) __rcu_read_lock(); __acquire(RCU); rcu_lock_acquire(&rcu_lock_map); + rcu_lockdep_assert(!rcu_is_cpu_idle(), + "rcu_read_lock() used illegally while idle"); } /* @@ -718,6 +718,8 @@ static inline void rcu_read_lock(void) */ static inline void rcu_read_unlock(void) { + rcu_lockdep_assert(!rcu_is_cpu_idle(), + "rcu_read_unlock() used illegally while idle"); rcu_lock_release(&rcu_lock_map); __release(RCU); __rcu_read_unlock(); @@ -745,6 +747,8 @@ static inline void rcu_read_lock_bh(void) local_bh_disable(); __acquire(RCU_BH); rcu_lock_acquire(&rcu_bh_lock_map); + rcu_lockdep_assert(!rcu_is_cpu_idle(), + "rcu_read_lock_bh() used illegally while idle"); } /* @@ -754,6 +758,8 @@ static inline void rcu_read_lock_bh(void) */ static inline void rcu_read_unlock_bh(void) { + rcu_lockdep_assert(!rcu_is_cpu_idle(), + "rcu_read_unlock_bh() used illegally while idle"); rcu_lock_release(&rcu_bh_lock_map); __release(RCU_BH); local_bh_enable(); @@ -777,6 +783,8 @@ static inline void rcu_read_lock_sched(void) preempt_disable(); __acquire(RCU_SCHED); rcu_lock_acquire(&rcu_sched_lock_map); + rcu_lockdep_assert(!rcu_is_cpu_idle(), + "rcu_read_lock_sched() used illegally while idle"); } /* Used by lockdep and tracing: cannot be traced, cannot call lockdep. */ @@ -793,6 +801,8 @@ static inline notrace void rcu_read_lock_sched_notrace(void) */ static inline void rcu_read_unlock_sched(void) { + rcu_lockdep_assert(!rcu_is_cpu_idle(), + "rcu_read_unlock_sched() used illegally while idle"); rcu_lock_release(&rcu_sched_lock_map); __release(RCU_SCHED); preempt_enable(); diff --git a/include/linux/srcu.h b/include/linux/srcu.h index 9a323728e60c..d3d5fa54f25e 100644 --- a/include/linux/srcu.h +++ b/include/linux/srcu.h @@ -172,6 +172,8 @@ static inline int srcu_read_lock(struct srcu_struct *sp) __acquires(sp) int retval = __srcu_read_lock(sp); rcu_lock_acquire(&(sp)->dep_map); + rcu_lockdep_assert(!rcu_is_cpu_idle(), + "srcu_read_lock() used illegally while idle"); return retval; } @@ -185,6 +187,8 @@ static inline int srcu_read_lock(struct srcu_struct *sp) __acquires(sp) static inline void srcu_read_unlock(struct srcu_struct *sp, int idx) __releases(sp) { + rcu_lockdep_assert(!rcu_is_cpu_idle(), + "srcu_read_unlock() used illegally while idle"); rcu_lock_release(&(sp)->dep_map); __srcu_read_unlock(sp, idx); } -- cgit From 8a2ecf474d3ee8dd5d001490349e422cec52f39f Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Thu, 2 Feb 2012 15:42:04 -0800 Subject: rcu: Add RCU_NONIDLE() for idle-loop RCU read-side critical sections RCU, RCU-bh, and RCU-sched read-side critical sections are forbidden in the inner idle loop, that is, between the rcu_idle_enter() and the rcu_idle_exit() -- RCU will happily ignore any such read-side critical sections. However, things like powertop need tracepoints in the inner idle loop. This commit therefore provides an RCU_NONIDLE() macro that can be used to wrap code in the idle loop that requires RCU read-side critical sections. Suggested-by: Steven Rostedt Signed-off-by: Paul E. McKenney Signed-off-by: Paul E. McKenney Reviewed-by: Josh Triplett Acked-by: Deepthi Dharwar --- include/linux/rcupdate.h | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'include/linux') diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 6ee663c8745a..937217425c47 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -190,6 +190,33 @@ extern void rcu_idle_exit(void); extern void rcu_irq_enter(void); extern void rcu_irq_exit(void); +/** + * RCU_NONIDLE - Indicate idle-loop code that needs RCU readers + * @a: Code that RCU needs to pay attention to. + * + * RCU, RCU-bh, and RCU-sched read-side critical sections are forbidden + * in the inner idle loop, that is, between the rcu_idle_enter() and + * the rcu_idle_exit() -- RCU will happily ignore any such read-side + * critical sections. However, things like powertop need tracepoints + * in the inner idle loop. + * + * This macro provides the way out: RCU_NONIDLE(do_something_with_RCU()) + * will tell RCU that it needs to pay attending, invoke its argument + * (in this example, a call to the do_something_with_RCU() function), + * and then tell RCU to go back to ignoring this CPU. It is permissible + * to nest RCU_NONIDLE() wrappers, but the nesting level is currently + * quite limited. If deeper nesting is required, it will be necessary + * to adjust DYNTICK_TASK_NESTING_VALUE accordingly. + * + * This macro may be used from process-level code only. + */ +#define RCU_NONIDLE(a) \ + do { \ + rcu_idle_exit(); \ + do { a; } while (0); \ + rcu_idle_enter(); \ + } while (0) + /* * Infrastructure to implement the synchronize_() primitives in * TREE_RCU and rcu_barrier_() primitives in TINY_RCU. -- cgit From 3f518bf745cbd6007d8069100fb9cb09e960c872 Mon Sep 17 00:00:00 2001 From: Pavel Emelyanov Date: Tue, 21 Feb 2012 07:30:58 +0000 Subject: datagram: Add offset argument to __skb_recv_datagram This one is only considered for MSG_PEEK flag and the value pointed by it specifies where to start peeking bytes from. If the offset happens to point into the middle of the returned skb, the offset within this skb is put back to this very argument. Signed-off-by: Pavel Emelyanov Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/skbuff.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 2b7317ff297f..f3cf43de3c2a 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -2046,7 +2046,7 @@ static inline void skb_frag_add_head(struct sk_buff *skb, struct sk_buff *frag) for (iter = skb_shinfo(skb)->frag_list; iter; iter = iter->next) extern struct sk_buff *__skb_recv_datagram(struct sock *sk, unsigned flags, - int *peeked, int *err); + int *peeked, int *off, int *err); extern struct sk_buff *skb_recv_datagram(struct sock *sk, unsigned flags, int noblock, int *err); extern unsigned int datagram_poll(struct file *file, struct socket *sock, -- cgit From da5ef6e51b327b41180b5d1000c06e8d3595a936 Mon Sep 17 00:00:00 2001 From: Pavel Emelyanov Date: Tue, 21 Feb 2012 07:31:18 +0000 Subject: skb: Add skb_peek_next helper Signed-off-by: Pavel Emelyanov Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/skbuff.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'include/linux') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index f3cf43de3c2a..c11a44ea1bf4 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -876,6 +876,24 @@ static inline struct sk_buff *skb_peek(const struct sk_buff_head *list_) return list; } +/** + * skb_peek_next - peek skb following the given one from a queue + * @skb: skb to start from + * @list_: list to peek at + * + * Returns %NULL when the end of the list is met or a pointer to the + * next element. The reference count is not incremented and the + * reference is therefore volatile. Use with caution. + */ +static inline struct sk_buff *skb_peek_next(struct sk_buff *skb, + const struct sk_buff_head *list_) +{ + struct sk_buff *next = skb->next; + if (next == (struct sk_buff *)list_) + next = NULL; + return next; +} + /** * skb_peek_tail - peek at the tail of an &sk_buff_head * @list_: list to peek at -- cgit From ef64a54f6e558155b4f149bb10666b9e914b6c54 Mon Sep 17 00:00:00 2001 From: Pavel Emelyanov Date: Tue, 21 Feb 2012 07:31:34 +0000 Subject: sock: Introduce the SO_PEEK_OFF sock option This one specifies where to start MSG_PEEK-ing queue data from. When set to negative value means that MSG_PEEK works as ususally -- peeks from the head of the queue always. When some bytes are peeked from queue and the peeking offset is non negative it is moved forward so that the next peek will return next portion of data. When non-peeking recvmsg occurs and the peeking offset is non negative is is moved backward so that the next peek will still peek the proper data (i.e. the one that would have been picked if there were no non peeking recv in between). The offset is set using per-proto opteration to let the protocol handle the locking issues and to check whether the peeking offset feature is supported by the protocol the socket belongs to. Signed-off-by: Pavel Emelyanov Signed-off-by: David S. Miller --- include/linux/net.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/net.h b/include/linux/net.h index b29923006b11..be60c7f5e145 100644 --- a/include/linux/net.h +++ b/include/linux/net.h @@ -206,6 +206,7 @@ struct proto_ops { int offset, size_t size, int flags); ssize_t (*splice_read)(struct socket *sock, loff_t *ppos, struct pipe_inode_info *pipe, size_t len, unsigned int flags); + void (*set_peek_off)(struct sock *sk, int val); }; #define DECLARE_SOCKADDR(type, dst, src) \ -- cgit From de5bdff7a72acc281219be2b8edeeca1fd81c542 Mon Sep 17 00:00:00 2001 From: Hiroshi Shimamoto Date: Thu, 16 Feb 2012 14:52:21 +0900 Subject: sched: Make initial SCHED_RR timeslace DEF_TIMESLICE Current the initial SCHED_RR timeslice of init_task is HZ, which means 1s, and is not same as the default SCHED_RR timeslice DEF_TIMESLICE. Change that initial timeslice to the DEF_TIMESLICE. Signed-off-by: Hiroshi Shimamoto [ s/DEF_TIMESLICE/RR_TIMESLICE/g ] Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/4F3C9995.3010800@ct.jp.nec.com Signed-off-by: Ingo Molnar --- include/linux/init_task.h | 2 +- include/linux/sched.h | 6 ++++++ 2 files changed, 7 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/init_task.h b/include/linux/init_task.h index 9c66b1ada9d7..f994d51f70f2 100644 --- a/include/linux/init_task.h +++ b/include/linux/init_task.h @@ -149,7 +149,7 @@ extern struct cred init_cred; }, \ .rt = { \ .run_list = LIST_HEAD_INIT(tsk.rt.run_list), \ - .time_slice = HZ, \ + .time_slice = RR_TIMESLICE, \ .nr_cpus_allowed = NR_CPUS, \ }, \ .tasks = LIST_HEAD_INIT(tsk.tasks), \ diff --git a/include/linux/sched.h b/include/linux/sched.h index 5dba2ad52431..eb5de466f099 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1234,6 +1234,12 @@ struct sched_rt_entity { #endif }; +/* + * default timeslice is 100 msecs (used only for SCHED_RR tasks). + * Timeslices get refilled after they expire. + */ +#define RR_TIMESLICE (100 * HZ / 1000) + struct rcu_node; enum perf_event_task_context { -- cgit From 8860020e0be1f03d83dc9e9e93e18a4ddbe01038 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 13 Feb 2012 15:17:18 +0100 Subject: cfg80211: restructure AP/GO mode API The AP/GO mode API isn't very clearly defined, it has "set beacon" and "new beacon" etc. Modify the API to the following: * start AP -- all settings * change beacon -- new beacon data * stop AP -- stop AP mode operation This also reflects in the nl80211 API, rename the commands there correspondingly (but keep the old names for compatibility.) Overall, this makes it much clearer what's going on in the API. Kalle developed the ath6kl changes, I created the rest of the patch. Signed-off-by: Kalle Valo Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/nl80211.h | 34 +++++++++++++++++++--------------- 1 file changed, 19 insertions(+), 15 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index ad56e21a9f10..be35a68746a7 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -156,21 +156,23 @@ * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX * or %NL80211_ATTR_MAC. * - * @NL80211_CMD_GET_BEACON: retrieve beacon information (returned in a - * %NL80222_CMD_NEW_BEACON message) - * @NL80211_CMD_SET_BEACON: set the beacon on an access point interface - * using the %NL80211_ATTR_BEACON_INTERVAL, %NL80211_ATTR_DTIM_PERIOD, - * %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL attributes. - * Following attributes are provided for drivers that generate full Beacon - * and Probe Response frames internally: %NL80211_ATTR_SSID, + * @NL80211_CMD_GET_BEACON: (not used) + * @NL80211_CMD_SET_BEACON: change the beacon on an access point interface + * using the %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL + * attributes. For drivers that generate the beacon and probe responses + * internally, the following attributes must be provided: %NL80211_ATTR_IE, + * %NL80211_ATTR_IE_PROBE_RESP and %NL80211_ATTR_IE_ASSOC_RESP. + * @NL80211_CMD_START_AP: Start AP operation on an AP interface, parameters + * are like for %NL80211_CMD_SET_BEACON, and additionally parameters that + * do not change are used, these include %NL80211_ATTR_BEACON_INTERVAL, + * %NL80211_ATTR_DTIM_PERIOD, %NL80211_ATTR_SSID, * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE, * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS, - * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY, - * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_IE, %NL80211_ATTR_IE_PROBE_RESP, - * %NL80211_ATTR_IE_ASSOC_RESP. - * @NL80211_CMD_NEW_BEACON: add a new beacon to an access point interface, - * parameters are like for %NL80211_CMD_SET_BEACON. - * @NL80211_CMD_DEL_BEACON: remove the beacon, stop sending it + * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY and + * %NL80211_ATTR_AUTH_TYPE. + * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP + * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface + * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP * * @NL80211_CMD_GET_STATION: Get station attributes for station identified by * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX. @@ -565,8 +567,10 @@ enum nl80211_commands { NL80211_CMD_GET_BEACON, NL80211_CMD_SET_BEACON, - NL80211_CMD_NEW_BEACON, - NL80211_CMD_DEL_BEACON, + NL80211_CMD_START_AP, + NL80211_CMD_NEW_BEACON = NL80211_CMD_START_AP, + NL80211_CMD_STOP_AP, + NL80211_CMD_DEL_BEACON = NL80211_CMD_STOP_AP, NL80211_CMD_GET_STATION, NL80211_CMD_SET_STATION, -- cgit From c5905afb0ee6550b42c49213da1c22d67316c194 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Fri, 24 Feb 2012 08:31:31 +0100 Subject: static keys: Introduce 'struct static_key', static_key_true()/false() and static_key_slow_[inc|dec]() So here's a boot tested patch on top of Jason's series that does all the cleanups I talked about and turns jump labels into a more intuitive to use facility. It should also address the various misconceptions and confusions that surround jump labels. Typical usage scenarios: #include struct static_key key = STATIC_KEY_INIT_TRUE; if (static_key_false(&key)) do unlikely code else do likely code Or: if (static_key_true(&key)) do likely code else do unlikely code The static key is modified via: static_key_slow_inc(&key); ... static_key_slow_dec(&key); The 'slow' prefix makes it abundantly clear that this is an expensive operation. I've updated all in-kernel code to use this everywhere. Note that I (intentionally) have not pushed through the rename blindly through to the lowest levels: the actual jump-label patching arch facility should be named like that, so we want to decouple jump labels from the static-key facility a bit. On non-jump-label enabled architectures static keys default to likely()/unlikely() branches. Signed-off-by: Ingo Molnar Acked-by: Jason Baron Acked-by: Steven Rostedt Cc: a.p.zijlstra@chello.nl Cc: mathieu.desnoyers@efficios.com Cc: davem@davemloft.net Cc: ddaney.cavm@gmail.com Cc: Linus Torvalds Link: http://lkml.kernel.org/r/20120222085809.GA26397@elte.hu Signed-off-by: Ingo Molnar --- include/linux/jump_label.h | 139 ++++++++++++++++++++++++++++++++------------- include/linux/netdevice.h | 4 +- include/linux/netfilter.h | 6 +- include/linux/perf_event.h | 12 ++-- include/linux/static_key.h | 1 + include/linux/tracepoint.h | 8 +-- 6 files changed, 116 insertions(+), 54 deletions(-) create mode 100644 include/linux/static_key.h (limited to 'include/linux') diff --git a/include/linux/jump_label.h b/include/linux/jump_label.h index f7c69580fea7..2172da2d9bb4 100644 --- a/include/linux/jump_label.h +++ b/include/linux/jump_label.h @@ -9,15 +9,15 @@ * * Jump labels provide an interface to generate dynamic branches using * self-modifying code. Assuming toolchain and architecture support the result - * of a "if (static_branch(&key))" statement is a unconditional branch (which + * of a "if (static_key_false(&key))" statement is a unconditional branch (which * defaults to false - and the true block is placed out of line). * - * However at runtime we can change the 'static' branch target using - * jump_label_{inc,dec}(). These function as a 'reference' count on the key + * However at runtime we can change the branch target using + * static_key_slow_{inc,dec}(). These function as a 'reference' count on the key * object and for as long as there are references all branches referring to * that particular key will point to the (out of line) true block. * - * Since this relies on modifying code the jump_label_{inc,dec}() functions + * Since this relies on modifying code the static_key_slow_{inc,dec}() functions * must be considered absolute slow paths (machine wide synchronization etc.). * OTOH, since the affected branches are unconditional their runtime overhead * will be absolutely minimal, esp. in the default (off) case where the total @@ -26,12 +26,26 @@ * * When the control is directly exposed to userspace it is prudent to delay the * decrement to avoid high frequency code modifications which can (and do) - * cause significant performance degradation. Struct jump_label_key_deferred and - * jump_label_dec_deferred() provide for this. + * cause significant performance degradation. Struct static_key_deferred and + * static_key_slow_dec_deferred() provide for this. * * Lacking toolchain and or architecture support, it falls back to a simple * conditional branch. - */ + * + * struct static_key my_key = STATIC_KEY_INIT_TRUE; + * + * if (static_key_true(&my_key)) { + * } + * + * will result in the true case being in-line and starts the key with a single + * reference. Mixing static_key_true() and static_key_false() on the same key is not + * allowed. + * + * Not initializing the key (static data is initialized to 0s anyway) is the + * same as using STATIC_KEY_INIT_FALSE and static_key_false() is + * equivalent with static_branch(). + * +*/ #include #include @@ -39,16 +53,17 @@ #if defined(CC_HAVE_ASM_GOTO) && defined(CONFIG_JUMP_LABEL) -struct jump_label_key { +struct static_key { atomic_t enabled; +/* Set lsb bit to 1 if branch is default true, 0 ot */ struct jump_entry *entries; #ifdef CONFIG_MODULES - struct jump_label_mod *next; + struct static_key_mod *next; #endif }; -struct jump_label_key_deferred { - struct jump_label_key key; +struct static_key_deferred { + struct static_key key; unsigned long timeout; struct delayed_work work; }; @@ -66,13 +81,34 @@ struct module; #ifdef HAVE_JUMP_LABEL -#ifdef CONFIG_MODULES -#define JUMP_LABEL_INIT {ATOMIC_INIT(0), NULL, NULL} -#else -#define JUMP_LABEL_INIT {ATOMIC_INIT(0), NULL} -#endif +#define JUMP_LABEL_TRUE_BRANCH 1UL + +static +inline struct jump_entry *jump_label_get_entries(struct static_key *key) +{ + return (struct jump_entry *)((unsigned long)key->entries + & ~JUMP_LABEL_TRUE_BRANCH); +} + +static inline bool jump_label_get_branch_default(struct static_key *key) +{ + if ((unsigned long)key->entries & JUMP_LABEL_TRUE_BRANCH) + return true; + return false; +} + +static __always_inline bool static_key_false(struct static_key *key) +{ + return arch_static_branch(key); +} -static __always_inline bool static_branch(struct jump_label_key *key) +static __always_inline bool static_key_true(struct static_key *key) +{ + return !static_key_false(key); +} + +/* Deprecated. Please use 'static_key_false() instead. */ +static __always_inline bool static_branch(struct static_key *key) { return arch_static_branch(key); } @@ -88,21 +124,24 @@ extern void arch_jump_label_transform(struct jump_entry *entry, extern void arch_jump_label_transform_static(struct jump_entry *entry, enum jump_label_type type); extern int jump_label_text_reserved(void *start, void *end); -extern void jump_label_inc(struct jump_label_key *key); -extern void jump_label_dec(struct jump_label_key *key); -extern void jump_label_dec_deferred(struct jump_label_key_deferred *key); -extern bool jump_label_enabled(struct jump_label_key *key); +extern void static_key_slow_inc(struct static_key *key); +extern void static_key_slow_dec(struct static_key *key); +extern void static_key_slow_dec_deferred(struct static_key_deferred *key); +extern bool static_key_enabled(struct static_key *key); extern void jump_label_apply_nops(struct module *mod); -extern void jump_label_rate_limit(struct jump_label_key_deferred *key, - unsigned long rl); +extern void +jump_label_rate_limit(struct static_key_deferred *key, unsigned long rl); + +#define STATIC_KEY_INIT_TRUE ((struct static_key) \ + { .enabled = ATOMIC_INIT(1), .entries = (void *)1 }) +#define STATIC_KEY_INIT_FALSE ((struct static_key) \ + { .enabled = ATOMIC_INIT(0), .entries = (void *)0 }) #else /* !HAVE_JUMP_LABEL */ #include -#define JUMP_LABEL_INIT {ATOMIC_INIT(0)} - -struct jump_label_key { +struct static_key { atomic_t enabled; }; @@ -110,30 +149,45 @@ static __always_inline void jump_label_init(void) { } -struct jump_label_key_deferred { - struct jump_label_key key; +struct static_key_deferred { + struct static_key key; }; -static __always_inline bool static_branch(struct jump_label_key *key) +static __always_inline bool static_key_false(struct static_key *key) +{ + if (unlikely(atomic_read(&key->enabled)) > 0) + return true; + return false; +} + +static __always_inline bool static_key_true(struct static_key *key) { - if (unlikely(atomic_read(&key->enabled))) + if (likely(atomic_read(&key->enabled)) > 0) return true; return false; } -static inline void jump_label_inc(struct jump_label_key *key) +/* Deprecated. Please use 'static_key_false() instead. */ +static __always_inline bool static_branch(struct static_key *key) +{ + if (unlikely(atomic_read(&key->enabled)) > 0) + return true; + return false; +} + +static inline void static_key_slow_inc(struct static_key *key) { atomic_inc(&key->enabled); } -static inline void jump_label_dec(struct jump_label_key *key) +static inline void static_key_slow_dec(struct static_key *key) { atomic_dec(&key->enabled); } -static inline void jump_label_dec_deferred(struct jump_label_key_deferred *key) +static inline void static_key_slow_dec_deferred(struct static_key_deferred *key) { - jump_label_dec(&key->key); + static_key_slow_dec(&key->key); } static inline int jump_label_text_reserved(void *start, void *end) @@ -144,9 +198,9 @@ static inline int jump_label_text_reserved(void *start, void *end) static inline void jump_label_lock(void) {} static inline void jump_label_unlock(void) {} -static inline bool jump_label_enabled(struct jump_label_key *key) +static inline bool static_key_enabled(struct static_key *key) { - return !!atomic_read(&key->enabled); + return (atomic_read(&key->enabled) > 0); } static inline int jump_label_apply_nops(struct module *mod) @@ -154,13 +208,20 @@ static inline int jump_label_apply_nops(struct module *mod) return 0; } -static inline void jump_label_rate_limit(struct jump_label_key_deferred *key, +static inline void +jump_label_rate_limit(struct static_key_deferred *key, unsigned long rl) { } + +#define STATIC_KEY_INIT_TRUE ((struct static_key) \ + { .enabled = ATOMIC_INIT(1) }) +#define STATIC_KEY_INIT_FALSE ((struct static_key) \ + { .enabled = ATOMIC_INIT(0) }) + #endif /* HAVE_JUMP_LABEL */ -#define jump_label_key_enabled ((struct jump_label_key){ .enabled = ATOMIC_INIT(1), }) -#define jump_label_key_disabled ((struct jump_label_key){ .enabled = ATOMIC_INIT(0), }) +#define STATIC_KEY_INIT STATIC_KEY_INIT_FALSE +#define jump_label_enabled static_key_enabled #endif /* _LINUX_JUMP_LABEL_H */ diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 0eac07c95255..7dfaae7846ab 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -214,8 +214,8 @@ enum { #include #ifdef CONFIG_RPS -#include -extern struct jump_label_key rps_needed; +#include +extern struct static_key rps_needed; #endif struct neighbour; diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h index b809265607d0..29734be334c1 100644 --- a/include/linux/netfilter.h +++ b/include/linux/netfilter.h @@ -163,13 +163,13 @@ extern struct ctl_path nf_net_ipv4_netfilter_sysctl_path[]; extern struct list_head nf_hooks[NFPROTO_NUMPROTO][NF_MAX_HOOKS]; #if defined(CONFIG_JUMP_LABEL) -#include -extern struct jump_label_key nf_hooks_needed[NFPROTO_NUMPROTO][NF_MAX_HOOKS]; +#include +extern struct static_key nf_hooks_needed[NFPROTO_NUMPROTO][NF_MAX_HOOKS]; static inline bool nf_hooks_active(u_int8_t pf, unsigned int hook) { if (__builtin_constant_p(pf) && __builtin_constant_p(hook)) - return static_branch(&nf_hooks_needed[pf][hook]); + return static_key_false(&nf_hooks_needed[pf][hook]); return !list_empty(&nf_hooks[pf][hook]); } diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 412b790f5da6..0d21e6f1cf53 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -514,7 +514,7 @@ struct perf_guest_info_callbacks { #include #include #include -#include +#include #include #include @@ -1038,7 +1038,7 @@ static inline int is_software_event(struct perf_event *event) return event->pmu->task_ctx_nr == perf_sw_context; } -extern struct jump_label_key perf_swevent_enabled[PERF_COUNT_SW_MAX]; +extern struct static_key perf_swevent_enabled[PERF_COUNT_SW_MAX]; extern void __perf_sw_event(u32, u64, struct pt_regs *, u64); @@ -1066,7 +1066,7 @@ perf_sw_event(u32 event_id, u64 nr, struct pt_regs *regs, u64 addr) { struct pt_regs hot_regs; - if (static_branch(&perf_swevent_enabled[event_id])) { + if (static_key_false(&perf_swevent_enabled[event_id])) { if (!regs) { perf_fetch_caller_regs(&hot_regs); regs = &hot_regs; @@ -1075,12 +1075,12 @@ perf_sw_event(u32 event_id, u64 nr, struct pt_regs *regs, u64 addr) } } -extern struct jump_label_key_deferred perf_sched_events; +extern struct static_key_deferred perf_sched_events; static inline void perf_event_task_sched_in(struct task_struct *prev, struct task_struct *task) { - if (static_branch(&perf_sched_events.key)) + if (static_key_false(&perf_sched_events.key)) __perf_event_task_sched_in(prev, task); } @@ -1089,7 +1089,7 @@ static inline void perf_event_task_sched_out(struct task_struct *prev, { perf_sw_event(PERF_COUNT_SW_CONTEXT_SWITCHES, 1, NULL, 0); - if (static_branch(&perf_sched_events.key)) + if (static_key_false(&perf_sched_events.key)) __perf_event_task_sched_out(prev, next); } diff --git a/include/linux/static_key.h b/include/linux/static_key.h new file mode 100644 index 000000000000..27bd3f8a0857 --- /dev/null +++ b/include/linux/static_key.h @@ -0,0 +1 @@ +#include diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h index fc36da97ff7e..bd96ecd0e05c 100644 --- a/include/linux/tracepoint.h +++ b/include/linux/tracepoint.h @@ -17,7 +17,7 @@ #include #include #include -#include +#include struct module; struct tracepoint; @@ -29,7 +29,7 @@ struct tracepoint_func { struct tracepoint { const char *name; /* Tracepoint name */ - struct jump_label_key key; + struct static_key key; void (*regfunc)(void); void (*unregfunc)(void); struct tracepoint_func __rcu *funcs; @@ -145,7 +145,7 @@ static inline void tracepoint_synchronize_unregister(void) extern struct tracepoint __tracepoint_##name; \ static inline void trace_##name(proto) \ { \ - if (static_branch(&__tracepoint_##name.key)) \ + if (static_key_false(&__tracepoint_##name.key)) \ __DO_TRACE(&__tracepoint_##name, \ TP_PROTO(data_proto), \ TP_ARGS(data_args), \ @@ -188,7 +188,7 @@ static inline void tracepoint_synchronize_unregister(void) __attribute__((section("__tracepoints_strings"))) = #name; \ struct tracepoint __tracepoint_##name \ __attribute__((section("__tracepoints"))) = \ - { __tpstrtab_##name, JUMP_LABEL_INIT, reg, unreg, NULL };\ + { __tpstrtab_##name, STATIC_KEY_INIT_FALSE, reg, unreg, NULL };\ static struct tracepoint * const __tracepoint_ptr_##name __used \ __attribute__((section("__tracepoints_ptrs"))) = \ &__tracepoint_##name; -- cgit From 36eabda3d094dae30a74350c6289c163349b744d Mon Sep 17 00:00:00 2001 From: Ben Greear Date: Sat, 11 Feb 2012 15:39:14 +0000 Subject: net: Support RXFCS feature flag. When set on hardware that supports the feature, this causes the Ethernet FCS to be appended to the end of the skb. Useful for sniffing packets. Signed-off-by: Ben Greear Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- include/linux/netdev_features.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/netdev_features.h b/include/linux/netdev_features.h index 77f5202977ce..d1331865f830 100644 --- a/include/linux/netdev_features.h +++ b/include/linux/netdev_features.h @@ -54,6 +54,7 @@ enum { NETIF_F_RXCSUM_BIT, /* Receive checksumming offload */ NETIF_F_NOCACHE_COPY_BIT, /* Use no-cache copyfromuser */ NETIF_F_LOOPBACK_BIT, /* Enable loopback */ + NETIF_F_RXFCS_BIT, /* Append FCS to skb pkt data */ /* * Add your fresh new feature above and remember to update @@ -98,6 +99,7 @@ enum { #define NETIF_F_TSO __NETIF_F(TSO) #define NETIF_F_UFO __NETIF_F(UFO) #define NETIF_F_VLAN_CHALLENGED __NETIF_F(VLAN_CHALLENGED) +#define NETIF_F_RXFCS __NETIF_F(RXFCS) /* Features valid for ethtool to change */ /* = all defined minus driver/device-class-related */ -- cgit From 3bdc0eba0b8b47797f4a76e377dd8360f317450f Mon Sep 17 00:00:00 2001 From: Ben Greear Date: Sat, 11 Feb 2012 15:39:30 +0000 Subject: net: Add framework to allow sending packets with customized CRC. This is useful for testing RX handling of frames with bad CRCs. Requires driver support to actually put the packet on the wire properly. Signed-off-by: Ben Greear Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- include/linux/if.h | 2 ++ include/linux/netdevice.h | 8 +++++++- include/linux/skbuff.h | 4 +++- 3 files changed, 12 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/if.h b/include/linux/if.h index 06b6ef60c821..f995c663c493 100644 --- a/include/linux/if.h +++ b/include/linux/if.h @@ -80,6 +80,8 @@ * skbs on transmit */ #define IFF_UNICAST_FLT 0x20000 /* Supports unicast filtering */ #define IFF_TEAM_PORT 0x40000 /* device used as team port */ +#define IFF_SUPP_NOFCS 0x80000 /* device supports sending custom FCS */ + #define IF_GET_IFACE 0x0001 /* for querying only */ #define IF_GET_PROTO 0x0002 diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 0eac07c95255..f1b7d037c2c5 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1082,7 +1082,8 @@ struct net_device { const struct header_ops *header_ops; unsigned int flags; /* interface flags (a la BSD) */ - unsigned int priv_flags; /* Like 'flags' but invisible to userspace. */ + unsigned int priv_flags; /* Like 'flags' but invisible to userspace. + * See if.h for definitions. */ unsigned short gflags; unsigned short padded; /* How much padding added by alloc_netdev() */ @@ -2650,6 +2651,11 @@ static inline int netif_is_bond_slave(struct net_device *dev) return dev->flags & IFF_SLAVE && dev->priv_flags & IFF_BONDING; } +static inline bool netif_supports_nofcs(struct net_device *dev) +{ + return dev->priv_flags & IFF_SUPP_NOFCS; +} + extern struct pernet_operations __net_initdata loopback_net_ops; /* Logging, debugging and troubleshooting/diagnostic helpers. */ diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index c11a44ea1bf4..06a4c0fd7bef 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -361,6 +361,7 @@ typedef unsigned char *sk_buff_data_t; * ports. * @wifi_acked_valid: wifi_acked was set * @wifi_acked: whether frame was acked on wifi or not + * @no_fcs: Request NIC to treat last 4 bytes as Ethernet FCS * @dma_cookie: a cookie to one of several possible DMA operations * done by skb DMA functions * @secmark: security marking @@ -459,7 +460,8 @@ struct sk_buff { __u8 l4_rxhash:1; __u8 wifi_acked_valid:1; __u8 wifi_acked:1; - /* 10/12 bit hole (depending on ndisc_nodetype presence) */ + __u8 no_fcs:1; + /* 9/11 bit hole (depending on ndisc_nodetype presence) */ kmemcheck_bitfield_end(flags2); #ifdef CONFIG_NET_DMA -- cgit From 5e0c03c8cd40e5c3b7ba624b8ba9a343de79ade1 Mon Sep 17 00:00:00 2001 From: Ben Greear Date: Sat, 11 Feb 2012 15:39:45 +0000 Subject: net: Support RX-ALL feature flag. This flag requests that network devices pass all received frames up the stack, even ones with errors such as invalid FCS (frame check sum). This will allow sniffers to see bad packets and perhaps give the user some idea how to fix the problem. Signed-off-by: Ben Greear Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- include/linux/netdev_features.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/netdev_features.h b/include/linux/netdev_features.h index d1331865f830..5ac32123035a 100644 --- a/include/linux/netdev_features.h +++ b/include/linux/netdev_features.h @@ -55,6 +55,7 @@ enum { NETIF_F_NOCACHE_COPY_BIT, /* Use no-cache copyfromuser */ NETIF_F_LOOPBACK_BIT, /* Enable loopback */ NETIF_F_RXFCS_BIT, /* Append FCS to skb pkt data */ + NETIF_F_RXALL_BIT, /* Receive errored frames too */ /* * Add your fresh new feature above and remember to update @@ -100,6 +101,7 @@ enum { #define NETIF_F_UFO __NETIF_F(UFO) #define NETIF_F_VLAN_CHALLENGED __NETIF_F(VLAN_CHALLENGED) #define NETIF_F_RXFCS __NETIF_F(RXFCS) +#define NETIF_F_RXALL __NETIF_F(RXALL) /* Features valid for ethtool to change */ /* = all defined minus driver/device-class-related */ -- cgit From 765e0ba62613fb90f09c1b5926750df0aa56f349 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 23 Feb 2012 14:55:59 -0500 Subject: usb-serial: new API for driver registration This patch (as1522) adds two new routines to the usb-serial core, for registering and unregistering serial drivers. Instead of registering the usb_driver and usb_serial_drivers separately, with error checking for each one, the drivers can all be registered and unregistered by a single function call. This reduces duplicated code. More importantly, the new core routines change the order in which the drivers are registered. Currently the usb-serial drivers are all registered first and the usb_driver is done last, which leaves a window for problems. A udev script may quickly add a new dynamic-ID for a usb-serial driver, causing the corresponding usb_driver to be probed. If the usb_driver hasn't been registered yet then an oops will occur. The new routine prevents such problems by registering the usb_driver first. To insure that it gets probed properly for already-attached serial devices, we call driver_attach() after all the usb-serial drivers have been registered. Along with adding the new routines, the patch modifies the "generic" serial driver to use them. Further patches will similarly modify all the other in-tree USB serial drivers. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/serial.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index 10cb74d2ad1d..8c8dbf9c5b89 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -300,8 +300,17 @@ struct usb_serial_driver { #define to_usb_serial_driver(d) \ container_of(d, struct usb_serial_driver, driver) +/* + * These two routines are kept only for backward compatibility. + * Don't use them; call usb_serial_{de}register_drivers() instead. + */ extern int usb_serial_register(struct usb_serial_driver *driver); extern void usb_serial_deregister(struct usb_serial_driver *driver); + +extern int usb_serial_register_drivers(struct usb_driver *udriver, + struct usb_serial_driver * const serial_drivers[]); +extern void usb_serial_deregister_drivers(struct usb_driver *udriver, + struct usb_serial_driver * const serial_drivers[]); extern void usb_serial_port_softint(struct usb_serial_port *port); extern int usb_serial_probe(struct usb_interface *iface, -- cgit From f799e7678390029e322ae2dc3cda389b11f38124 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 24 Feb 2012 12:50:30 -0800 Subject: USB: serial: remove usb_serial_register and usb_serial_deregister No one uses them anymore, they should be using the safer usb_serial_register_drivers() and usb_serial_deregister_drivers() functions instead. Thanks to Alan Stern for writing these functions and porting all in-kernel users to them. Cc: Alan Stern Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/serial.h | 7 ------- 1 file changed, 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index 8c8dbf9c5b89..34c06a723dcc 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -300,13 +300,6 @@ struct usb_serial_driver { #define to_usb_serial_driver(d) \ container_of(d, struct usb_serial_driver, driver) -/* - * These two routines are kept only for backward compatibility. - * Don't use them; call usb_serial_{de}register_drivers() instead. - */ -extern int usb_serial_register(struct usb_serial_driver *driver); -extern void usb_serial_deregister(struct usb_serial_driver *driver); - extern int usb_serial_register_drivers(struct usb_driver *udriver, struct usb_serial_driver * const serial_drivers[]); extern void usb_serial_deregister_drivers(struct usb_driver *udriver, -- cgit From 247ff8e610cb63c015de19191db9666754c2ed79 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 24 Feb 2012 12:47:11 +0000 Subject: vt: lock the accent table First step to debletcherising the vt console layer - pick a victim and fix the locking This is a nice simple object with its own rules so lets pick it out for treatment. The user of the table already has a lock so we will also use the same lock for updates. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- include/linux/vt_kern.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h index c2164fad0083..5d8726ad5729 100644 --- a/include/linux/vt_kern.h +++ b/include/linux/vt_kern.h @@ -167,4 +167,7 @@ extern int unregister_vt_notifier(struct notifier_block *nb); extern void hide_boot_cursor(bool hide); +/* keyboard provided interfaces */ +extern int vt_do_diacrit(unsigned int cmd, void __user *up, int eperm); + #endif /* _VT_KERN_H */ -- cgit From 80d326fab534a5380e8f6e509a0b9076655a9670 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Fri, 24 Feb 2012 14:30:15 +0000 Subject: netlink: add netlink_dump_control structure for netlink_dump_start() Davem considers that the argument list of this interface is getting out of control. This patch tries to address this issue following his proposal: struct netlink_dump_control c = { .dump = dump, .done = done, ... }; netlink_dump_start(..., &c); Suggested by David S. Miller. Signed-off-by: Pablo Neira Ayuso Signed-off-by: David S. Miller --- include/linux/netlink.h | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netlink.h b/include/linux/netlink.h index a390e9d54827..1f8c1a95f57c 100644 --- a/include/linux/netlink.h +++ b/include/linux/netlink.h @@ -248,11 +248,15 @@ __nlmsg_put(struct sk_buff *skb, u32 pid, u32 seq, int type, int len, int flags) #define NLMSG_PUT(skb, pid, seq, type, len) \ NLMSG_NEW(skb, pid, seq, type, len, 0) +struct netlink_dump_control { + int (*dump)(struct sk_buff *skb, struct netlink_callback *); + int (*done)(struct netlink_callback*); + u16 min_dump_alloc; +}; + extern int netlink_dump_start(struct sock *ssk, struct sk_buff *skb, const struct nlmsghdr *nlh, - int (*dump)(struct sk_buff *skb, struct netlink_callback*), - int (*done)(struct netlink_callback*), - u16 min_dump_alloc); + struct netlink_dump_control *control); #define NL_NONROOT_RECV 0x1 -- cgit From 7175c883071515f0d4c1cece2646203b8a5a7415 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Fri, 24 Feb 2012 14:30:16 +0000 Subject: netlink: allow to pass data pointer to netlink_dump_start() callback This patch allows you to pass a data pointer that can be accessed from the dump callback. Netfilter is going to use this patch to provide filtered dumps to user-space. This is specifically interesting in ctnetlink that may handle lots of conntrack entries. We can save precious cycles by skipping the conversion to TLV format of conntrack entries that are not interesting for user-space. More specifically, ctnetlink will include one operation to allow to filter the dumping of conntrack entries by ctmark values. Signed-off-by: Pablo Neira Ayuso Signed-off-by: David S. Miller --- include/linux/netlink.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/netlink.h b/include/linux/netlink.h index 1f8c1a95f57c..a2092f582a78 100644 --- a/include/linux/netlink.h +++ b/include/linux/netlink.h @@ -225,6 +225,7 @@ struct netlink_callback { int (*dump)(struct sk_buff * skb, struct netlink_callback *cb); int (*done)(struct netlink_callback *cb); + void *data; u16 family; u16 min_dump_alloc; unsigned int prev_seq, seq; @@ -251,6 +252,7 @@ __nlmsg_put(struct sk_buff *skb, u32 pid, u32 seq, int type, int len, int flags) struct netlink_dump_control { int (*dump)(struct sk_buff *skb, struct netlink_callback *); int (*done)(struct netlink_callback*); + void *data; u16 min_dump_alloc; }; -- cgit From 0f298a285f2e365cb34f69d1f79bb9fc996f683d Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Fri, 24 Feb 2012 14:41:50 +0000 Subject: netfilter: ctnetlink: support kernel-space dump filtering by ctmark This patch adds CTA_MARK_MASK which, together with CTA_MARK, allows you to selectively send conntrack entries to user-space by returning those that match mark & mask. With this, we can save cycles in the building and the parsing of the entries that may be later on filtered out in user-space by using the ctmark & mask. Signed-off-by: Pablo Neira Ayuso Signed-off-by: David S. Miller --- include/linux/netfilter/nfnetlink_conntrack.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/netfilter/nfnetlink_conntrack.h b/include/linux/netfilter/nfnetlink_conntrack.h index debf1aefd753..d498a4426ebf 100644 --- a/include/linux/netfilter/nfnetlink_conntrack.h +++ b/include/linux/netfilter/nfnetlink_conntrack.h @@ -43,6 +43,7 @@ enum ctattr_type { CTA_ZONE, CTA_SECCTX, CTA_TIMESTAMP, + CTA_MARK_MASK, __CTA_MAX }; #define CTA_MAX (__CTA_MAX - 1) -- cgit From 622121719934f60378279eb440d3cec2fc3176d2 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sat, 25 Feb 2012 00:51:05 +0000 Subject: mlx4_en: dont change mac_header on xmit A driver xmit function is not allowed to change skb without special care. mlx4_en_xmit() should not call skb_reset_mac_header() and instead should use skb->data to access ethernet header. This removes a dumb test : if (ethh && ethh->h_dest) Also remove this slow mlx4_en_mac_to_u64() call, we can use get_unaligned() to get faster code. Signed-off-by: Eric Dumazet Cc: Yevgeny Petrilin Signed-off-by: David S. Miller --- include/linux/mlx4/qp.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mlx4/qp.h b/include/linux/mlx4/qp.h index bee8fa231276..091f9e7dc8b9 100644 --- a/include/linux/mlx4/qp.h +++ b/include/linux/mlx4/qp.h @@ -212,7 +212,10 @@ struct mlx4_wqe_ctrl_seg { * [1] SE (solicited event) * [0] FL (force loopback) */ - __be32 srcrb_flags; + union { + __be32 srcrb_flags; + __be16 srcrb_flags16[2]; + }; /* * imm is immediate data for send/RDMA write w/ immediate; * also invalidation key for send with invalidate; input -- cgit From 136ced891ad2762dfe5ba476103e82ea2b9aff41 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Mon, 13 Feb 2012 13:24:19 +0200 Subject: usb: otg: Remove OTG specific members from usb_phy All the drivers are now converted to use struct usb_otg, so removing the OTG specific members from struct usb_phy. Signed-off-by: Heikki Krogerus Reviewed-by: Marek Vasut Signed-off-by: Felipe Balbi --- include/linux/usb/otg.h | 50 +++++-------------------------------------------- 1 file changed, 5 insertions(+), 45 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h index 5c1cfbc73555..de89342098e4 100644 --- a/include/linux/usb/otg.h +++ b/include/linux/usb/otg.h @@ -89,15 +89,11 @@ struct usb_phy { const char *label; unsigned int flags; - u8 default_a; enum usb_otg_state state; enum usb_phy_events last_event; struct usb_otg *otg; - struct usb_bus *host; - struct usb_gadget *gadget; - struct usb_phy_io_ops *io_ops; void __iomem *io_priv; @@ -112,32 +108,14 @@ struct usb_phy { int (*init)(struct usb_phy *x); void (*shutdown)(struct usb_phy *x); - /* bind/unbind the host controller */ - int (*set_host)(struct usb_phy *x, - struct usb_bus *host); - - /* bind/unbind the peripheral controller */ - int (*set_peripheral)(struct usb_phy *x, - struct usb_gadget *gadget); - /* effective for B devices, ignored for A-peripheral */ int (*set_power)(struct usb_phy *x, unsigned mA); - /* effective for A-peripheral, ignored for B devices */ - int (*set_vbus)(struct usb_phy *x, - bool enabled); - /* for non-OTG B devices: set transceiver into suspend mode */ int (*set_suspend)(struct usb_phy *x, int suspend); - /* for B devices only: start session with A-Host */ - int (*start_srp)(struct usb_phy *x); - - /* start or continue HNP role switch */ - int (*start_hnp)(struct usb_phy *x); - }; @@ -219,7 +197,7 @@ otg_start_hnp(struct usb_phy *x) if (x->otg && x->otg->start_hnp) return x->otg->start_hnp(x->otg); - return x->start_hnp(x); + return -ENOTSUPP; } /* Context: can sleep */ @@ -229,7 +207,7 @@ otg_set_vbus(struct usb_phy *x, bool enabled) if (x->otg && x->otg->set_vbus) return x->otg->set_vbus(x->otg, enabled); - return x->set_vbus(x, enabled); + return -ENOTSUPP; } /* for HCDs */ @@ -239,7 +217,7 @@ otg_set_host(struct usb_phy *x, struct usb_bus *host) if (x->otg && x->otg->set_host) return x->otg->set_host(x->otg, host); - return x->set_host(x, host); + return -ENOTSUPP; } /* for usb peripheral controller drivers */ @@ -251,7 +229,7 @@ otg_set_peripheral(struct usb_phy *x, struct usb_gadget *periph) if (x->otg && x->otg->set_peripheral) return x->otg->set_peripheral(x->otg, periph); - return x->set_peripheral(x, periph); + return -ENOTSUPP; } static inline int @@ -278,7 +256,7 @@ otg_start_srp(struct usb_phy *x) if (x->otg && x->otg->start_srp) return x->otg->start_srp(x->otg); - return x->start_srp(x); + return -ENOTSUPP; } /* notifiers */ @@ -297,22 +275,4 @@ usb_unregister_notifier(struct usb_phy *x, struct notifier_block *nb) /* for OTG controller drivers (and maybe other stuff) */ extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num); -/* Temporary aliases for transceiver functions */ -#define otg_set_transceiver(x) usb_set_transceiver(x) -#define otg_get_transceiver() usb_get_transceiver() -#define otg_put_transceiver(x) usb_put_transceiver(x) - -#define otg_io_read(x, a) usb_phy_io_read(x, a) -#define otg_io_write(x, a, b) usb_phy_io_write(x, a, b) - -#define otg_init(x) usb_phy_init(x) -#define otg_shutdown(x) usb_phy_shutdown(x) -#define otg_set_power(x, a) usb_phy_set_power(x, a) -#define otg_set_suspend(x, a) usb_phy_set_suspend(x, a) - -#define otg_register_notifier(x, a) usb_register_notifier(x, a) -#define otg_unregister_notifier(x, a) usb_unregiser_notifier(x, a) - -#define otg_io_access_ops usb_phy_io_ops - #endif /* __LINUX_USB_OTG_H */ -- cgit From 6e13c6505cdff9766d5268ffb8c972c1a2f996e6 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Mon, 13 Feb 2012 13:24:20 +0200 Subject: usb: otg: Convert all users to pass struct usb_otg for OTG functions This changes the otg functions so that they receive struct otg instead of struct usb_phy as parameter and converts all users of these functions to pass the otg member of their usb_phy. Includes fixes to IMX code from Sascha Hauer. [ balbi@ti.com : fixed a compile warning on ehci-mv.c ] Signed-off-by: Heikki Krogerus Acked-by: Sascha Hauer Acked-by: Igor Grinberg Acked-by: Pavankumar Kondeti Acked-by: Li Yang Acked-by: Alan Stern Reviewed-by: Marek Vasut Signed-off-by: Felipe Balbi --- include/linux/usb/otg.h | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h index de89342098e4..f67810f8f21b 100644 --- a/include/linux/usb/otg.h +++ b/include/linux/usb/otg.h @@ -192,30 +192,30 @@ static inline const char *otg_state_string(enum usb_otg_state state) /* Context: can sleep */ static inline int -otg_start_hnp(struct usb_phy *x) +otg_start_hnp(struct usb_otg *otg) { - if (x->otg && x->otg->start_hnp) - return x->otg->start_hnp(x->otg); + if (otg && otg->start_hnp) + return otg->start_hnp(otg); return -ENOTSUPP; } /* Context: can sleep */ static inline int -otg_set_vbus(struct usb_phy *x, bool enabled) +otg_set_vbus(struct usb_otg *otg, bool enabled) { - if (x->otg && x->otg->set_vbus) - return x->otg->set_vbus(x->otg, enabled); + if (otg && otg->set_vbus) + return otg->set_vbus(otg, enabled); return -ENOTSUPP; } /* for HCDs */ static inline int -otg_set_host(struct usb_phy *x, struct usb_bus *host) +otg_set_host(struct usb_otg *otg, struct usb_bus *host) { - if (x->otg && x->otg->set_host) - return x->otg->set_host(x->otg, host); + if (otg && otg->set_host) + return otg->set_host(otg, host); return -ENOTSUPP; } @@ -224,10 +224,10 @@ otg_set_host(struct usb_phy *x, struct usb_bus *host) /* Context: can sleep */ static inline int -otg_set_peripheral(struct usb_phy *x, struct usb_gadget *periph) +otg_set_peripheral(struct usb_otg *otg, struct usb_gadget *periph) { - if (x->otg && x->otg->set_peripheral) - return x->otg->set_peripheral(x->otg, periph); + if (otg && otg->set_peripheral) + return otg->set_peripheral(otg, periph); return -ENOTSUPP; } @@ -251,10 +251,10 @@ usb_phy_set_suspend(struct usb_phy *x, int suspend) } static inline int -otg_start_srp(struct usb_phy *x) +otg_start_srp(struct usb_otg *otg) { - if (x->otg && x->otg->start_srp) - return x->otg->start_srp(x->otg); + if (otg && otg->start_srp) + return otg->start_srp(otg); return -ENOTSUPP; } -- cgit From a698908d3b3be915ac20cd37faeff1216f6b4fe8 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 15 Dec 2011 13:31:48 +0200 Subject: usb: gadget: add generic map/unmap request utilities such utilities are currently duplicated on all UDC drivers basically with the same structure. Let's group all implementations into one generic implementation and get rid of that duplication. Signed-off-by: Felipe Balbi --- include/linux/usb/gadget.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index da653b5c7134..9517466ababb 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -950,6 +950,16 @@ static inline void usb_free_descriptors(struct usb_descriptor_header **v) /*-------------------------------------------------------------------------*/ +/* utility to simplify map/unmap of usb_requests to/from DMA */ + +extern int usb_gadget_map_request(struct usb_gadget *gadget, + struct usb_request *req, int is_in); + +extern void usb_gadget_unmap_request(struct usb_gadget *gadget, + struct usb_request *req, int is_in); + +/*-------------------------------------------------------------------------*/ + /* utility wrapping a simple endpoint selection policy */ extern struct usb_ep *usb_ep_autoconfig(struct usb_gadget *, -- cgit From fbe74e361c6586cdd996bc2805033999dd469e99 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Wed, 15 Feb 2012 11:58:54 +0100 Subject: security: struct security_operations kerneldoc fix unix_may_send hook has the prototype: int (*unix_may_send) (struct socket *sock, struct socket *other) so the documentation is wrongly referring to the second argument as @sock. Signed-off-by: Javier Martinez Canillas Signed-off-by: Jiri Kosina --- include/linux/security.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/security.h b/include/linux/security.h index 83c18e8c846d..c8949385e56e 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -812,7 +812,7 @@ static inline void security_free_mnt_opts(struct security_mnt_opts *opts) * Check permissions before connecting or sending datagrams from @sock to * @other. * @sock contains the socket structure. - * @sock contains the peer socket structure. + * @other contains the peer socket structure. * Return 0 if permission is granted. * * The @unix_stream_connect and @unix_may_send hooks were necessary because -- cgit From e6be0c9e7e9f68b99e5a5ba609c455bae4b141d5 Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Thu, 23 Feb 2012 13:42:30 +0100 Subject: compiler.h: Fix typo Signed-off-by: Alexander Stein Signed-off-by: Jiri Kosina --- include/linux/compiler.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/compiler.h b/include/linux/compiler.h index 4a243546d142..923d093c9cea 100644 --- a/include/linux/compiler.h +++ b/include/linux/compiler.h @@ -236,7 +236,7 @@ void ftrace_likely_update(struct ftrace_branch_data *f, int val, int expect); /* * Rather then using noinline to prevent stack consumption, use - * noinline_for_stack instead. For documentaiton reasons. + * noinline_for_stack instead. For documentation reasons. */ #define noinline_for_stack noinline -- cgit From 8eedce996556d7d06522cd3a0e6069141c8dffe0 Mon Sep 17 00:00:00 2001 From: Jason Baron Date: Tue, 28 Feb 2012 13:49:01 -0500 Subject: static keys: Inline the static_key_enabled() function In the jump label enabled case, calling static_key_enabled() results in a function call. The function returns the results of a compare, so it really doesn't need the overhead of a full function call. Let's make it 'static inline' for both the jump label enabled and disabled cases. Signed-off-by: Jason Baron Cc: a.p.zijlstra@chello.nl Cc: rostedt@goodmis.org Cc: mathieu.desnoyers@polymtl.ca Cc: Andrew Morton Cc: Linus Torvalds Link: http://lkml.kernel.org/r/201202281849.q1SIn1p2023270@int-mx10.intmail.prod.int.phx2.redhat.com Signed-off-by: Ingo Molnar --- include/linux/jump_label.h | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/jump_label.h b/include/linux/jump_label.h index 2172da2d9bb4..c513a40510f5 100644 --- a/include/linux/jump_label.h +++ b/include/linux/jump_label.h @@ -127,7 +127,6 @@ extern int jump_label_text_reserved(void *start, void *end); extern void static_key_slow_inc(struct static_key *key); extern void static_key_slow_dec(struct static_key *key); extern void static_key_slow_dec_deferred(struct static_key_deferred *key); -extern bool static_key_enabled(struct static_key *key); extern void jump_label_apply_nops(struct module *mod); extern void jump_label_rate_limit(struct static_key_deferred *key, unsigned long rl); @@ -198,11 +197,6 @@ static inline int jump_label_text_reserved(void *start, void *end) static inline void jump_label_lock(void) {} static inline void jump_label_unlock(void) {} -static inline bool static_key_enabled(struct static_key *key) -{ - return (atomic_read(&key->enabled) > 0); -} - static inline int jump_label_apply_nops(struct module *mod) { return 0; @@ -224,4 +218,9 @@ jump_label_rate_limit(struct static_key_deferred *key, #define STATIC_KEY_INIT STATIC_KEY_INIT_FALSE #define jump_label_enabled static_key_enabled +static inline bool static_key_enabled(struct static_key *key) +{ + return (atomic_read(&key->enabled) > 0); +} + #endif /* _LINUX_JUMP_LABEL_H */ -- cgit From 7ac4704c099125214a4f0a4bd54ce94d15be2ffb Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Sat, 25 Feb 2012 18:28:09 +0100 Subject: usb/storage: a couple defines from drivers/usb/storage/transport.h to include/linux/usb/storage.h This moves the BOT data structures for CBW and CSW from drivers internal header file to global include able file in include/. The storage gadget is using the same name for CSW but a different for CBW so I fix it up properly. The same goes for the ub driver and keucr driver in staging. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/storage.h | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb/storage.h b/include/linux/usb/storage.h index d7fc910f1dc4..87a94bf34d47 100644 --- a/include/linux/usb/storage.h +++ b/include/linux/usb/storage.h @@ -45,4 +45,43 @@ #define USB_PR_DEVICE 0xff /* Use device's value */ + /* + * Bulk only data structures + */ + +/* command block wrapper */ +struct bulk_cb_wrap { + __le32 Signature; /* contains 'USBC' */ + __u32 Tag; /* unique per command id */ + __le32 DataTransferLength; /* size of data */ + __u8 Flags; /* direction in bit 0 */ + __u8 Lun; /* LUN normally 0 */ + __u8 Length; /* of of the CDB */ + __u8 CDB[16]; /* max command */ +}; + +#define US_BULK_CB_WRAP_LEN 31 +#define US_BULK_CB_SIGN 0x43425355 /*spells out USBC */ +#define US_BULK_FLAG_IN 1 +#define US_BULK_FLAG_OUT 0 + +/* command status wrapper */ +struct bulk_cs_wrap { + __le32 Signature; /* should = 'USBS' */ + __u32 Tag; /* same as original command */ + __le32 Residue; /* amount not transferred */ + __u8 Status; /* see below */ + __u8 Filler[18]; +}; + +#define US_BULK_CS_WRAP_LEN 13 +#define US_BULK_CS_SIGN 0x53425355 /* spells out 'USBS' */ +#define US_BULK_STAT_OK 0 +#define US_BULK_STAT_FAIL 1 +#define US_BULK_STAT_PHASE 2 + +/* bulk-only class specific requests */ +#define US_BULK_RESET_REQUEST 0xff +#define US_BULK_GET_MAX_LUN 0xfe + #endif -- cgit From b8db6d6402ddca1c78a27407fbd10a6ccb23ab14 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Sat, 25 Feb 2012 18:28:10 +0100 Subject: usb/storage: redefine US_BULK_FLAG_IN and use it US_BULK_FLAG_IN is defined as 1 and not used. The USB storage spec says that bit 7 of flags within CBW defines the data direction. 1 is DATA-IN (read from device) and 0 is the DATA-OUT. Bit 6 is obselete and bits 0-5 are reserved. This patch redefines the unsued define US_BULK_FLAG_IN from 1 to 1 << 7 aka 0x80 and replaces the obvious users. In a following patch the storage gadget will use it as well. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/storage.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/usb/storage.h b/include/linux/usb/storage.h index 87a94bf34d47..4de58b15fad6 100644 --- a/include/linux/usb/storage.h +++ b/include/linux/usb/storage.h @@ -62,7 +62,7 @@ struct bulk_cb_wrap { #define US_BULK_CB_WRAP_LEN 31 #define US_BULK_CB_SIGN 0x43425355 /*spells out USBC */ -#define US_BULK_FLAG_IN 1 +#define US_BULK_FLAG_IN (1 << 7) #define US_BULK_FLAG_OUT 0 /* command status wrapper */ -- cgit From 03892d5fefbe7d4df68466bd4cfda86fac84ebd8 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Sat, 25 Feb 2012 18:28:12 +0100 Subject: usb/storage: remove Filler member from struct bulk_cs_wrap As Alan Stern pointed out this member has nothing to do with the Command Status Wrapper (CSW) as specified by the Universal Serial Bus Mass Storage Class Bulk-Only Transport rev 1.0. It defines the structure without the additional 18 filler bytes and defines the total size of the struct to exactly 13 bytes. Larger responses should be dropped. All in-tree users use a defines instead of sizeof() of this struct as far I can tell. Cc: Alan Stern Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/storage.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/usb/storage.h b/include/linux/usb/storage.h index 4de58b15fad6..cb33fff2ba0b 100644 --- a/include/linux/usb/storage.h +++ b/include/linux/usb/storage.h @@ -71,7 +71,6 @@ struct bulk_cs_wrap { __u32 Tag; /* same as original command */ __le32 Residue; /* amount not transferred */ __u8 Status; /* see below */ - __u8 Filler[18]; }; #define US_BULK_CS_WRAP_LEN 13 -- cgit From d1cddb4a8e9b09c33158acae05c48069d74fa4d0 Mon Sep 17 00:00:00 2001 From: Greg KH Date: Fri, 24 Feb 2012 15:38:14 -0800 Subject: USB: create module_usb_serial_driver macro Now that Alan Stern has cleaned up the usb serial driver registration, we have the ability to create a module_usb_serial_driver macro to make things a bit simpler, like the other *_driver macros created. But, as we need two functions here, we can't reuse the existing module_driver() macro, so we need to roll our own. Here's a patch implementing module_usb_serial_driver() and it converts the pl2303 driver to use it, showing a nice cleanup. Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/serial.h | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index 34c06a723dcc..7b1db841e2a8 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -406,5 +406,33 @@ do { \ } \ } while (0) +/* + * module_usb_serial_driver() - Helper macro for registering a USB Serial driver + * @__usb_driver: usb_driver struct to register + * @__serial_drivers: list of usb_serial drivers to register + * + * Helper macro for USB serial drivers which do not do anything special + * in module init/exit. This eliminates a lot of boilerplate. Each + * module may only use this macro once, and calling it replaces + * module_init() and module_exit() + * + * Note, we can't use the generic module_driver() call here, due to the + * two parameters in the usb_serial_* functions, so we roll our own here + * :( + */ +#define module_usb_serial_driver(__usb_driver, __serial_drivers) \ +static int __init usb_serial_driver_init(void) \ +{ \ + return usb_serial_register_drivers(&(__usb_driver), \ + (__serial_drivers)); \ +} \ +module_init(usb_serial_driver_init); \ +static void __exit usb_serial_driver_exit(void) \ +{ \ + return usb_serial_deregister_drivers(&(__usb_driver), \ + (__serial_drivers)); \ +} \ +module_exit(usb_serial_driver_exit); + #endif /* __LINUX_USB_SERIAL_H */ -- cgit From c5491ea779793f977d282754db478157cc409d82 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 21 Mar 2011 12:09:35 +0100 Subject: sched/rt: Add schedule_preempt_disabled() Add helper to get rid of the ever repeating: preempt_enable_no_resched(); schedule(); preempt_disable(); patterns. Signed-off-by: Thomas Gleixner Acked-by: Peter Zijlstra Link: http://lkml.kernel.org/n/tip-wxx7btox7coby6ifv5vzhzgp@git.kernel.org Signed-off-by: Ingo Molnar --- include/linux/sched.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index 1a6398424fab..03dd224d0667 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -361,6 +361,7 @@ extern signed long schedule_timeout_interruptible(signed long timeout); extern signed long schedule_timeout_killable(signed long timeout); extern signed long schedule_timeout_uninterruptible(signed long timeout); asmlinkage void schedule(void); +extern void schedule_preempt_disabled(void); extern int mutex_spin_on_owner(struct mutex *lock, struct task_struct *owner); struct nsproxy; -- cgit From ba74c1448f127649046615ec017bded7b2a76f29 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 21 Mar 2011 13:32:17 +0100 Subject: sched/rt: Document scheduler related skip-resched-check sites Create a distinction between scheduler related preempt_enable_no_resched() calls and the nearly one hundred other places in the kernel that do not want to reschedule, for one reason or another. This distinction matters for -rt, where the scheduler and the non-scheduler preempt models (and checks) are different. For upstream it's purely documentational. Signed-off-by: Thomas Gleixner Link: http://lkml.kernel.org/n/tip-gs88fvx2mdv5psnzxnv575ke@git.kernel.org Signed-off-by: Ingo Molnar --- include/linux/preempt.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/preempt.h b/include/linux/preempt.h index 58969b2a8a82..5a710b9c578e 100644 --- a/include/linux/preempt.h +++ b/include/linux/preempt.h @@ -48,12 +48,14 @@ do { \ barrier(); \ } while (0) -#define preempt_enable_no_resched() \ +#define sched_preempt_enable_no_resched() \ do { \ barrier(); \ dec_preempt_count(); \ } while (0) +#define preempt_enable_no_resched() sched_preempt_enable_no_resched() + #define preempt_enable() \ do { \ preempt_enable_no_resched(); \ @@ -92,6 +94,7 @@ do { \ #else /* !CONFIG_PREEMPT_COUNT */ #define preempt_disable() do { } while (0) +#define sched_preempt_enable_no_resched() do { } while (0) #define preempt_enable_no_resched() do { } while (0) #define preempt_enable() do { } while (0) -- cgit From 63b2001169e75cd71e917ec953fdab572e3f944a Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 1 Dec 2011 00:04:00 +0100 Subject: sched/wait: Add __wake_up_all_locked() API For code which protects the waitqueue itself with another lock it makes no sense to acquire the waitqueue lock for wakeup all. Provide __wake_up_all_locked(). This is an optimization on the vanilla kernel (to be used by the PCI code) and an important semantic distinction on -rt. Signed-off-by: Thomas Gleixner Acked-by: Peter Zijlstra Link: http://lkml.kernel.org/n/tip-ux6m4b8jonb9inx8xafh77ds@git.kernel.org Signed-off-by: Ingo Molnar --- include/linux/wait.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/wait.h b/include/linux/wait.h index a9ce45e8501c..7d9a9e990ce6 100644 --- a/include/linux/wait.h +++ b/include/linux/wait.h @@ -157,7 +157,7 @@ void __wake_up(wait_queue_head_t *q, unsigned int mode, int nr, void *key); void __wake_up_locked_key(wait_queue_head_t *q, unsigned int mode, void *key); void __wake_up_sync_key(wait_queue_head_t *q, unsigned int mode, int nr, void *key); -void __wake_up_locked(wait_queue_head_t *q, unsigned int mode); +void __wake_up_locked(wait_queue_head_t *q, unsigned int mode, int nr); void __wake_up_sync(wait_queue_head_t *q, unsigned int mode, int nr); void __wake_up_bit(wait_queue_head_t *, void *, int); int __wait_on_bit(wait_queue_head_t *, struct wait_bit_queue *, int (*)(void *), unsigned); @@ -170,7 +170,8 @@ wait_queue_head_t *bit_waitqueue(void *, int); #define wake_up(x) __wake_up(x, TASK_NORMAL, 1, NULL) #define wake_up_nr(x, nr) __wake_up(x, TASK_NORMAL, nr, NULL) #define wake_up_all(x) __wake_up(x, TASK_NORMAL, 0, NULL) -#define wake_up_locked(x) __wake_up_locked((x), TASK_NORMAL) +#define wake_up_locked(x) __wake_up_locked((x), TASK_NORMAL, 1) +#define wake_up_all_locked(x) __wake_up_locked((x), TASK_NORMAL, 0) #define wake_up_interruptible(x) __wake_up(x, TASK_INTERRUPTIBLE, 1, NULL) #define wake_up_interruptible_nr(x, nr) __wake_up(x, TASK_INTERRUPTIBLE, nr, NULL) -- cgit From 3c7d51843b03a6839e9ec7cda724e54d2319a63a Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 17 Jul 2011 20:46:52 +0200 Subject: sched/rt: Do not submit new work when PI-blocked When we are PI-blocked then we want to get things done ASAP. Signed-off-by: Thomas Gleixner Acked-by: Peter Zijlstra Link: http://lkml.kernel.org/n/tip-vw8et3445km5b8mpihf4trae@git.kernel.org Signed-off-by: Ingo Molnar --- include/linux/sched.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index 03dd224d0667..c628a9151437 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -2082,12 +2082,20 @@ extern unsigned int sysctl_sched_cfs_bandwidth_slice; extern int rt_mutex_getprio(struct task_struct *p); extern void rt_mutex_setprio(struct task_struct *p, int prio); extern void rt_mutex_adjust_pi(struct task_struct *p); +static inline bool tsk_is_pi_blocked(struct task_struct *tsk) +{ + return tsk->pi_blocked_on != NULL; +} #else static inline int rt_mutex_getprio(struct task_struct *p) { return p->normal_prio; } # define rt_mutex_adjust_pi(p) do { } while (0) +static inline bool tsk_is_pi_blocked(struct task_struct *tsk) +{ + return false; +} #endif extern bool yield_to(struct task_struct *p, bool preempt); -- cgit From cd70469d084fde198dc07c1a31b8463562228a5a Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 29 Feb 2012 16:46:23 +0200 Subject: usb: core: hcd: make hcd->irq unsigned There's really no point in having hcd->irq as a signed integer when we consider the fact that IRQ 0 means NO_IRQ. In order to avoid confusion, make hcd->irq unsigned and fix users who were passing -1 as the IRQ number to usb_add_hcd. Tested-by: Kuninori Morimoto Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/hcd.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index 2e6071efbfb7..5de415707c23 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -127,7 +127,7 @@ struct usb_hcd { unsigned authorized_default:1; unsigned has_tt:1; /* Integrated TT in root hub */ - int irq; /* irq allocated */ + unsigned int irq; /* irq allocated */ void __iomem *regs; /* device memory/io */ u64 rsrc_start; /* memory/io resource start */ u64 rsrc_len; /* memory/io resource length */ -- cgit From 9c717758c9289331e22c88ef69d8c248def9cd29 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 29 Feb 2012 14:23:27 +0000 Subject: mdio: Export mdio.h to userland The ID packing definitions are needed by userland and the register definitions may also be useful there. Do not export mdio_phy_id_{is_c45,prtad,devad}() as the use of bool is problematic and it's not that useful to export only a subset of these. Do not export MDIO_SUPPORTS_{C22,C45} directly; these flags are only exposed to userland through struct ethtool_cmd so they should be defined alongside that with appropriate names. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- include/linux/Kbuild | 1 + include/linux/mdio.h | 9 ++++----- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/Kbuild b/include/linux/Kbuild index c94e71781b79..4b0b7ed4a999 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -238,6 +238,7 @@ header-y += magic.h header-y += major.h header-y += map_to_7segment.h header-y += matroxfb.h +header-y += mdio.h header-y += media.h header-y += mempolicy.h header-y += meye.h diff --git a/include/linux/mdio.h b/include/linux/mdio.h index b1494aced217..ec90da7232cc 100644 --- a/include/linux/mdio.h +++ b/include/linux/mdio.h @@ -273,6 +273,8 @@ static inline __u16 mdio_phy_id_c45(int prtad, int devad) return MDIO_PHY_ID_C45 | (prtad << 5) | devad; } +#ifdef __KERNEL__ + static inline bool mdio_phy_id_is_c45(int phy_id) { return (phy_id & MDIO_PHY_ID_C45) && !(phy_id & ~MDIO_PHY_ID_C45_MASK); @@ -288,11 +290,6 @@ static inline __u16 mdio_phy_id_devad(int phy_id) return phy_id & MDIO_PHY_ID_DEVAD; } -#define MDIO_SUPPORTS_C22 1 -#define MDIO_SUPPORTS_C45 2 - -#ifdef __KERNEL__ - /** * struct mdio_if_info - Ethernet controller MDIO interface * @prtad: PRTAD of the PHY (%MDIO_PRTAD_NONE if not present/unknown) @@ -321,6 +318,8 @@ struct mdio_if_info { #define MDIO_PRTAD_NONE (-1) #define MDIO_DEVAD_NONE (-1) +#define MDIO_SUPPORTS_C22 1 +#define MDIO_SUPPORTS_C45 2 #define MDIO_EMULATE_C22 4 struct ethtool_cmd; -- cgit From 9c4df53bc3f9c72d7f1f1226927f456d46412381 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 29 Feb 2012 14:26:22 +0000 Subject: ethtool, mdio, mii: Specify MDIO information fields in struct ethtool_cmd Add comments for ethtool_cmd::phy_address and ethtool_cmd::mdio_support, and definitions of the flags currently used in mdio_support. In the mdio library, assert that its own flags continue to match those in the ethtool interface. In the mii library, use the ethtool flag definition and stop including . Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- include/linux/ethtool.h | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index da5b2de99ae4..e1d9e0ede309 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -30,10 +30,15 @@ struct ethtool_cmd { * access it */ __u8 duplex; /* Duplex, half or full */ __u8 port; /* Which connector port */ - __u8 phy_address; + __u8 phy_address; /* MDIO PHY address (PRTAD for clause 45). + * May be read-only or read-write + * depending on the driver. + */ __u8 transceiver; /* Which transceiver to use */ __u8 autoneg; /* Enable or disable autonegotiation */ - __u8 mdio_support; + __u8 mdio_support; /* MDIO protocols supported. Read-only. + * Not set by all drivers. + */ __u32 maxtxpkt; /* Tx pkts before generating tx int */ __u32 maxrxpkt; /* Rx pkts before generating rx int */ __u16 speed_hi; /* The forced speed (upper @@ -59,6 +64,20 @@ static inline __u32 ethtool_cmd_speed(const struct ethtool_cmd *ep) return (ep->speed_hi << 16) | ep->speed; } +/* Device supports clause 22 register access to PHY or peripherals + * using the interface defined in . This should not be + * set if there are known to be no such peripherals present or if + * the driver only emulates clause 22 registers for compatibility. + */ +#define ETH_MDIO_SUPPORTS_C22 1 + +/* Device supports clause 45 register access to PHY or peripherals + * using the interface defined in and . + * This should not be set if there are known to be no such peripherals + * present. + */ +#define ETH_MDIO_SUPPORTS_C45 2 + #define ETHTOOL_FWVERS_LEN 32 #define ETHTOOL_BUSINFO_LEN 32 /* these strings are set to whatever the driver author decides... */ -- cgit From fe316bf2d5847bc5dd975668671a7b1067603bc7 Mon Sep 17 00:00:00 2001 From: Jun'ichi Nomura Date: Fri, 2 Mar 2012 10:38:33 +0100 Subject: block: Fix NULL pointer dereference in sd_revalidate_disk Since 2.6.39 (1196f8b), when a driver returns -ENOMEDIUM for open(), __blkdev_get() calls rescan_partitions() to remove in-kernel partition structures and raise KOBJ_CHANGE uevent. However it ends up calling driver's revalidate_disk without open and could cause oops. In the case of SCSI: process A process B ---------------------------------------------- sys_open __blkdev_get sd_open returns -ENOMEDIUM scsi_remove_device rescan_partitions sd_revalidate_disk Oopses are reported here: http://marc.info/?l=linux-scsi&m=132388619710052 This patch separates the partition invalidation from rescan_partitions() and use it for -ENOMEDIUM case. Reported-by: Huajun Li Signed-off-by: Jun'ichi Nomura Acked-by: Tejun Heo Cc: stable@kernel.org Signed-off-by: Jens Axboe --- include/linux/genhd.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/genhd.h b/include/linux/genhd.h index fe23ee768589..e61d3192448e 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -596,6 +596,7 @@ extern char *disk_name (struct gendisk *hd, int partno, char *buf); extern int disk_expand_part_tbl(struct gendisk *disk, int target); extern int rescan_partitions(struct gendisk *disk, struct block_device *bdev); +extern int invalidate_partitions(struct gendisk *disk, struct block_device *bdev); extern struct hd_struct * __must_check add_partition(struct gendisk *disk, int partno, sector_t start, sector_t len, int flags, -- cgit From 62d3c5439c534b0e6c653fc63e6d8c67be3a57b1 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 2 Mar 2012 10:51:00 +0100 Subject: Block: use a freezable workqueue for disk-event polling This patch (as1519) fixes a bug in the block layer's disk-events polling. The polling is done by a work routine queued on the system_nrt_wq workqueue. Since that workqueue isn't freezable, the polling continues even in the middle of a system sleep transition. Obviously, polling a suspended drive for media changes and such isn't a good thing to do; in the case of USB mass-storage devices it can lead to real problems requiring device resets and even re-enumeration. The patch fixes things by creating a new system-wide, non-reentrant, freezable workqueue and using it for disk-events polling. Signed-off-by: Alan Stern CC: Acked-by: Tejun Heo Acked-by: Rafael J. Wysocki Signed-off-by: Jens Axboe --- include/linux/workqueue.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h index eb8b9f15f2e0..af155450cabb 100644 --- a/include/linux/workqueue.h +++ b/include/linux/workqueue.h @@ -289,12 +289,16 @@ enum { * * system_freezable_wq is equivalent to system_wq except that it's * freezable. + * + * system_nrt_freezable_wq is equivalent to system_nrt_wq except that + * it's freezable. */ extern struct workqueue_struct *system_wq; extern struct workqueue_struct *system_long_wq; extern struct workqueue_struct *system_nrt_wq; extern struct workqueue_struct *system_unbound_wq; extern struct workqueue_struct *system_freezable_wq; +extern struct workqueue_struct *system_nrt_freezable_wq; extern struct workqueue_struct * __alloc_workqueue_key(const char *fmt, unsigned int flags, int max_active, -- cgit From d28a9689c93195d39f91f35a9519876688605b65 Mon Sep 17 00:00:00 2001 From: Anton Tikhomirov Date: Wed, 15 Feb 2012 17:04:56 +0900 Subject: usb: dwc3: Add Exynos Specific Glue layer Adds Exynos Specific Glue layer to support USB peripherals on Samsung Exynos5 chips. [ balbi@ti.com : prevent compilation of Exynos glue layer on platforms which don't provide clk API implementation ] Signed-off-by: Anton Tikhomirov Signed-off-by: Felipe Balbi --- include/linux/platform_data/dwc3-exynos.h | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 include/linux/platform_data/dwc3-exynos.h (limited to 'include/linux') diff --git a/include/linux/platform_data/dwc3-exynos.h b/include/linux/platform_data/dwc3-exynos.h new file mode 100644 index 000000000000..5eb7da9b3772 --- /dev/null +++ b/include/linux/platform_data/dwc3-exynos.h @@ -0,0 +1,24 @@ +/** + * dwc3-exynos.h - Samsung EXYNOS DWC3 Specific Glue layer, header. + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Author: Anton Tikhomirov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef _DWC3_EXYNOS_H_ +#define _DWC3_EXYNOS_H_ + +struct dwc3_exynos_data { + int phy_type; + int (*phy_init)(struct platform_device *pdev, int type); + int (*phy_exit)(struct platform_device *pdev, int type); +}; + +#endif /* _DWC3_EXYNOS_H_ */ -- cgit From 2e5b5b3a1b7768c89fbfeca18e75f8ee377e924c Mon Sep 17 00:00:00 2001 From: Hiroshi Shimamoto Date: Thu, 23 Feb 2012 17:41:27 +0900 Subject: sched: Clean up parameter passing of proc_sched_autogroup_set_nice() Pass nice as a value to proc_sched_autogroup_set_nice(). No side effect is expected, and the variable err will be overwritten with the return value. Signed-off-by: Hiroshi Shimamoto Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/4F45FBB7.5090607@ct.jp.nec.com Signed-off-by: Ingo Molnar --- include/linux/sched.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index c628a9151437..c298fb9cf5ad 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -2065,7 +2065,7 @@ extern void sched_autogroup_fork(struct signal_struct *sig); extern void sched_autogroup_exit(struct signal_struct *sig); #ifdef CONFIG_PROC_FS extern void proc_sched_autogroup_show_task(struct task_struct *p, struct seq_file *m); -extern int proc_sched_autogroup_set_nice(struct task_struct *p, int *nice); +extern int proc_sched_autogroup_set_nice(struct task_struct *p, int nice); #endif #else static inline void sched_autogroup_create_attach(struct task_struct *p) { } -- cgit From f541fb7e20c848f947ca65fbf169efe69400c942 Mon Sep 17 00:00:00 2001 From: Samuel Jero Date: Sun, 26 Feb 2012 18:22:02 -0700 Subject: dccp: fix bug in sequence number validation during connection setup This fixes a bug in the sequence number validation during the initial handshake. The code did not treat the initial sequence numbers ISS and ISR as read-only and did not keep state for GSR and GSS as required by the specification. This causes problems with retransmissions during the initial handshake, causing the budding connection to be reset. This patch now treats ISS/ISR as read-only and tracks GSS/GSR as required. Signed-off-by: Samuel Jero Signed-off-by: Gerrit Renker --- include/linux/dccp.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/dccp.h b/include/linux/dccp.h index 710c04302a15..eaf95a023af4 100644 --- a/include/linux/dccp.h +++ b/include/linux/dccp.h @@ -376,8 +376,10 @@ static inline unsigned int dccp_hdr_len(const struct sk_buff *skb) /** * struct dccp_request_sock - represent DCCP-specific connection request * @dreq_inet_rsk: structure inherited from - * @dreq_iss: initial sequence number sent on the Response (RFC 4340, 7.1) - * @dreq_isr: initial sequence number received on the Request + * @dreq_iss: initial sequence number, sent on the first Response (RFC 4340, 7.1) + * @dreq_gss: greatest sequence number sent (for retransmitted Responses) + * @dreq_isr: initial sequence number received in the first Request + * @dreq_gsr: greatest sequence number received (for retransmitted Request(s)) * @dreq_service: service code present on the Request (there is just one) * @dreq_featneg: feature negotiation options for this connection * The following two fields are analogous to the ones in dccp_sock: @@ -387,7 +389,9 @@ static inline unsigned int dccp_hdr_len(const struct sk_buff *skb) struct dccp_request_sock { struct inet_request_sock dreq_inet_rsk; __u64 dreq_iss; + __u64 dreq_gss; __u64 dreq_isr; + __u64 dreq_gsr; __be32 dreq_service; struct list_head dreq_featneg; __u32 dreq_timestamp_echo; -- cgit From 2556cd8603cd1f39205aaf61f054a76133359ae6 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 3 Mar 2012 15:04:45 -0500 Subject: mdio.h: Include linux/types.h Fixes: /home/davem/src/GIT/net-next/usr/include/linux/mdio.h:271: found __[us]{8,16,32,64} type without #include Signed-off-by: David S. Miller --- include/linux/mdio.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mdio.h b/include/linux/mdio.h index ec90da7232cc..dfb947959ec9 100644 --- a/include/linux/mdio.h +++ b/include/linux/mdio.h @@ -10,6 +10,7 @@ #ifndef __LINUX_MDIO_H__ #define __LINUX_MDIO_H__ +#include #include /* MDIO Manageable Devices (MMDs). */ -- cgit From 784db3f06228da81627d23052a6d2ecc38db001a Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Sun, 4 Mar 2012 12:54:54 +0000 Subject: ppp: Change copyright notices from ANU to me This changes the copyright notices on the PPP code that I developed in the late 1990s from being copyright The Australian National University to copyright Paul Mackerras. I can do this as I have an acknowledgement in writing from the Head of the Computer Science Department at ANU (where I worked then) that ANU does not claim any intellectual property in this code. While I'm at it, change the copyright notice from BSD-style to GNU GPL like the rest of the kernel. Signed-off-by: Paul Mackerras Signed-off-by: David S. Miller --- include/linux/ppp-comp.h | 38 ++++---------------------------------- include/linux/ppp_defs.h | 38 ++++---------------------------------- 2 files changed, 8 insertions(+), 68 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ppp-comp.h b/include/linux/ppp-comp.h index b8d4ddd22736..e53ff65935dd 100644 --- a/include/linux/ppp-comp.h +++ b/include/linux/ppp-comp.h @@ -1,42 +1,12 @@ /* * ppp-comp.h - Definitions for doing PPP packet compression. * - * Copyright (c) 1994 The Australian National University. - * All rights reserved. + * Copyright 1994-1998 Paul Mackerras. * - * Permission to use, copy, modify, and distribute this software and its - * documentation is hereby granted, provided that the above copyright - * notice appears in all copies. This software is provided without any - * warranty, express or implied. The Australian National University - * makes no representations about the suitability of this software for - * any purpose. - * - * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY - * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES - * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF - * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY - * OF SUCH DAMAGE. - * - * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY - * AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS - * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO - * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, - * OR MODIFICATIONS. + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. */ - -/* - * ==FILEVERSION 980319== - * - * NOTE TO MAINTAINERS: - * If you modify this file at all, please set the above date. - * ppp-comp.h is shipped with a PPP distribution as well as with the kernel; - * if everyone increases the FILEVERSION number above, then scripts - * can do the right thing when deciding whether to install a new ppp-comp.h - * file. Don't change the format of that line otherwise, so the - * installation script can recognize it. - */ - #ifndef _NET_PPP_COMP_H #define _NET_PPP_COMP_H diff --git a/include/linux/ppp_defs.h b/include/linux/ppp_defs.h index 0f93ed6b4a88..ba416f67eb62 100644 --- a/include/linux/ppp_defs.h +++ b/include/linux/ppp_defs.h @@ -1,44 +1,14 @@ /* * ppp_defs.h - PPP definitions. * - * Copyright (c) 1994 The Australian National University. - * All rights reserved. + * Copyright 1994-2000 Paul Mackerras. * - * Permission to use, copy, modify, and distribute this software and its - * documentation is hereby granted, provided that the above copyright - * notice appears in all copies. This software is provided without any - * warranty, express or implied. The Australian National University - * makes no representations about the suitability of this software for - * any purpose. - * - * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY - * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES - * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF - * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY - * OF SUCH DAMAGE. - * - * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY - * AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS - * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO - * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, - * OR MODIFICATIONS. + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. */ - #include -/* - * ==FILEVERSION 20000114== - * - * NOTE TO MAINTAINERS: - * If you modify this file at all, please set the above date. - * ppp_defs.h is shipped with a PPP distribution as well as with the kernel; - * if everyone increases the FILEVERSION number above, then scripts - * can do the right thing when deciding whether to install a new ppp_defs.h - * file. Don't change the format of that line otherwise, so the - * installation script can recognize it. - */ - #ifndef _PPP_DEFS_H_ #define _PPP_DEFS_H_ -- cgit From bf7daebb9fba540cb8864f435f153678b3e5c171 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Sun, 4 Mar 2012 12:56:04 +0000 Subject: ppp: Move ioctl definitions from if_ppp.h to new ppp-ioctl.h This moves the definitions of the ioctls, constants and structures relating to the ppp_generic interface to userspace out from if_ppp.h to a new file, ppp-ioctl.h. The new file has my copyright since I designed and implemented the ppp_generic interface in the late 1990s. None of the contents of this file comes from the original if_ppp.h published by Carnegie Mellon University. Of the remainder of if_ppp.h, only the PPP_MTU definition was being used, and this replaces the uses of it with PPP_MRU (which is identical). Therefore, this replaces the entire file with the single line #include which clearly doesn't contain any CMU code. Thus I have removed the CMU copyright notice with its problematic advertising clause, and in fact since it's only one trivial line I have not added any other copyright notice. Signed-off-by: Paul Mackerras Signed-off-by: David S. Miller --- include/linux/Kbuild | 1 + include/linux/if_ppp.h | 174 +--------------------------------------------- include/linux/ppp-ioctl.h | 119 +++++++++++++++++++++++++++++++ 3 files changed, 121 insertions(+), 173 deletions(-) create mode 100644 include/linux/ppp-ioctl.h (limited to 'include/linux') diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 4b0b7ed4a999..a25555381097 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -305,6 +305,7 @@ header-y += poll.h header-y += posix_types.h header-y += ppdev.h header-y += ppp-comp.h +header-y += ppp-ioctl.h header-y += ppp_defs.h header-y += pps.h header-y += prctl.h diff --git a/include/linux/if_ppp.h b/include/linux/if_ppp.h index c9ad38322576..9048fabb7a4e 100644 --- a/include/linux/if_ppp.h +++ b/include/linux/if_ppp.h @@ -1,173 +1 @@ -/* - * if_ppp.h - Point-to-Point Protocol definitions. - * - * Copyright (c) 1989 Carnegie Mellon University. - * All rights reserved. - * - * Redistribution and use in source and binary forms are permitted - * provided that the above copyright notice and this paragraph are - * duplicated in all such forms and that any documentation, - * advertising materials, and other materials related to such - * distribution and use acknowledge that the software was developed - * by Carnegie Mellon University. The name of the - * University may not be used to endorse or promote products derived - * from this software without specific prior written permission. - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED - * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. - * - */ - -/* - * ==FILEVERSION 20050812== - * - * NOTE TO MAINTAINERS: - * If you modify this file at all, please set the above date. - * if_ppp.h is shipped with a PPP distribution as well as with the kernel; - * if everyone increases the FILEVERSION number above, then scripts - * can do the right thing when deciding whether to install a new if_ppp.h - * file. Don't change the format of that line otherwise, so the - * installation script can recognize it. - */ - -#ifndef _IF_PPP_H_ -#define _IF_PPP_H_ - -#include -#include - -/* - * Packet sizes - */ - -#define PPP_MTU 1500 /* Default MTU (size of Info field) */ -#define PPP_MAXMRU 65000 /* Largest MRU we allow */ -#define PROTO_IPX 0x002b /* protocol numbers */ -#define PROTO_DNA_RT 0x0027 /* DNA Routing */ - - -/* - * Bit definitions for flags. - */ - -#define SC_COMP_PROT 0x00000001 /* protocol compression (output) */ -#define SC_COMP_AC 0x00000002 /* header compression (output) */ -#define SC_COMP_TCP 0x00000004 /* TCP (VJ) compression (output) */ -#define SC_NO_TCP_CCID 0x00000008 /* disable VJ connection-id comp. */ -#define SC_REJ_COMP_AC 0x00000010 /* reject adrs/ctrl comp. on input */ -#define SC_REJ_COMP_TCP 0x00000020 /* reject TCP (VJ) comp. on input */ -#define SC_CCP_OPEN 0x00000040 /* Look at CCP packets */ -#define SC_CCP_UP 0x00000080 /* May send/recv compressed packets */ -#define SC_ENABLE_IP 0x00000100 /* IP packets may be exchanged */ -#define SC_LOOP_TRAFFIC 0x00000200 /* send traffic to pppd */ -#define SC_MULTILINK 0x00000400 /* do multilink encapsulation */ -#define SC_MP_SHORTSEQ 0x00000800 /* use short MP sequence numbers */ -#define SC_COMP_RUN 0x00001000 /* compressor has been inited */ -#define SC_DECOMP_RUN 0x00002000 /* decompressor has been inited */ -#define SC_MP_XSHORTSEQ 0x00004000 /* transmit short MP seq numbers */ -#define SC_DEBUG 0x00010000 /* enable debug messages */ -#define SC_LOG_INPKT 0x00020000 /* log contents of good pkts recvd */ -#define SC_LOG_OUTPKT 0x00040000 /* log contents of pkts sent */ -#define SC_LOG_RAWIN 0x00080000 /* log all chars received */ -#define SC_LOG_FLUSH 0x00100000 /* log all chars flushed */ -#define SC_SYNC 0x00200000 /* synchronous serial mode */ -#define SC_MUST_COMP 0x00400000 /* no uncompressed packets may be sent or received */ -#define SC_MASK 0x0f600fff /* bits that user can change */ - -/* state bits */ -#define SC_XMIT_BUSY 0x10000000 /* (used by isdn_ppp?) */ -#define SC_RCV_ODDP 0x08000000 /* have rcvd char with odd parity */ -#define SC_RCV_EVNP 0x04000000 /* have rcvd char with even parity */ -#define SC_RCV_B7_1 0x02000000 /* have rcvd char with bit 7 = 1 */ -#define SC_RCV_B7_0 0x01000000 /* have rcvd char with bit 7 = 0 */ -#define SC_DC_FERROR 0x00800000 /* fatal decomp error detected */ -#define SC_DC_ERROR 0x00400000 /* non-fatal decomp error detected */ - -/* - * Ioctl definitions. - */ - -struct npioctl { - int protocol; /* PPP protocol, e.g. PPP_IP */ - enum NPmode mode; -}; - -/* Structure describing a CCP configuration option, for PPPIOCSCOMPRESS */ -struct ppp_option_data { - __u8 __user *ptr; - __u32 length; - int transmit; -}; - -struct ifpppstatsreq { - struct ifreq b; - struct ppp_stats stats; /* statistic information */ -}; - -struct ifpppcstatsreq { - struct ifreq b; - struct ppp_comp_stats stats; -}; - -/* For PPPIOCGL2TPSTATS */ -struct pppol2tp_ioc_stats { - __u16 tunnel_id; /* redundant */ - __u16 session_id; /* if zero, get tunnel stats */ - __u32 using_ipsec:1; /* valid only for session_id == 0 */ - __aligned_u64 tx_packets; - __aligned_u64 tx_bytes; - __aligned_u64 tx_errors; - __aligned_u64 rx_packets; - __aligned_u64 rx_bytes; - __aligned_u64 rx_seq_discards; - __aligned_u64 rx_oos_packets; - __aligned_u64 rx_errors; -}; - -#define ifr__name b.ifr_ifrn.ifrn_name -#define stats_ptr b.ifr_ifru.ifru_data - -/* - * Ioctl definitions. - */ - -#define PPPIOCGFLAGS _IOR('t', 90, int) /* get configuration flags */ -#define PPPIOCSFLAGS _IOW('t', 89, int) /* set configuration flags */ -#define PPPIOCGASYNCMAP _IOR('t', 88, int) /* get async map */ -#define PPPIOCSASYNCMAP _IOW('t', 87, int) /* set async map */ -#define PPPIOCGUNIT _IOR('t', 86, int) /* get ppp unit number */ -#define PPPIOCGRASYNCMAP _IOR('t', 85, int) /* get receive async map */ -#define PPPIOCSRASYNCMAP _IOW('t', 84, int) /* set receive async map */ -#define PPPIOCGMRU _IOR('t', 83, int) /* get max receive unit */ -#define PPPIOCSMRU _IOW('t', 82, int) /* set max receive unit */ -#define PPPIOCSMAXCID _IOW('t', 81, int) /* set VJ max slot ID */ -#define PPPIOCGXASYNCMAP _IOR('t', 80, ext_accm) /* get extended ACCM */ -#define PPPIOCSXASYNCMAP _IOW('t', 79, ext_accm) /* set extended ACCM */ -#define PPPIOCXFERUNIT _IO('t', 78) /* transfer PPP unit */ -#define PPPIOCSCOMPRESS _IOW('t', 77, struct ppp_option_data) -#define PPPIOCGNPMODE _IOWR('t', 76, struct npioctl) /* get NP mode */ -#define PPPIOCSNPMODE _IOW('t', 75, struct npioctl) /* set NP mode */ -#define PPPIOCSPASS _IOW('t', 71, struct sock_fprog) /* set pass filter */ -#define PPPIOCSACTIVE _IOW('t', 70, struct sock_fprog) /* set active filt */ -#define PPPIOCGDEBUG _IOR('t', 65, int) /* Read debug level */ -#define PPPIOCSDEBUG _IOW('t', 64, int) /* Set debug level */ -#define PPPIOCGIDLE _IOR('t', 63, struct ppp_idle) /* get idle time */ -#define PPPIOCNEWUNIT _IOWR('t', 62, int) /* create new ppp unit */ -#define PPPIOCATTACH _IOW('t', 61, int) /* attach to ppp unit */ -#define PPPIOCDETACH _IOW('t', 60, int) /* detach from ppp unit/chan */ -#define PPPIOCSMRRU _IOW('t', 59, int) /* set multilink MRU */ -#define PPPIOCCONNECT _IOW('t', 58, int) /* connect channel to unit */ -#define PPPIOCDISCONN _IO('t', 57) /* disconnect channel */ -#define PPPIOCATTCHAN _IOW('t', 56, int) /* attach to ppp channel */ -#define PPPIOCGCHAN _IOR('t', 55, int) /* get ppp channel number */ -#define PPPIOCGL2TPSTATS _IOR('t', 54, struct pppol2tp_ioc_stats) - -#define SIOCGPPPSTATS (SIOCDEVPRIVATE + 0) -#define SIOCGPPPVER (SIOCDEVPRIVATE + 1) /* NEVER change this!! */ -#define SIOCGPPPCSTATS (SIOCDEVPRIVATE + 2) - -#if !defined(ifr_mtu) -#define ifr_mtu ifr_ifru.ifru_metric -#endif - -#endif /* _IF_PPP_H_ */ +#include diff --git a/include/linux/ppp-ioctl.h b/include/linux/ppp-ioctl.h new file mode 100644 index 000000000000..2d9a8859550a --- /dev/null +++ b/include/linux/ppp-ioctl.h @@ -0,0 +1,119 @@ +/* + * ppp-ioctl.h - PPP ioctl definitions. + * + * Copyright 1999-2002 Paul Mackerras. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + */ +#ifndef _PPP_IOCTL_H +#define _PPP_IOCTL_H + +#include +#include + +/* + * Bit definitions for flags argument to PPPIOCGFLAGS/PPPIOCSFLAGS. + */ +#define SC_COMP_PROT 0x00000001 /* protocol compression (output) */ +#define SC_COMP_AC 0x00000002 /* header compression (output) */ +#define SC_COMP_TCP 0x00000004 /* TCP (VJ) compression (output) */ +#define SC_NO_TCP_CCID 0x00000008 /* disable VJ connection-id comp. */ +#define SC_REJ_COMP_AC 0x00000010 /* reject adrs/ctrl comp. on input */ +#define SC_REJ_COMP_TCP 0x00000020 /* reject TCP (VJ) comp. on input */ +#define SC_CCP_OPEN 0x00000040 /* Look at CCP packets */ +#define SC_CCP_UP 0x00000080 /* May send/recv compressed packets */ +#define SC_ENABLE_IP 0x00000100 /* IP packets may be exchanged */ +#define SC_LOOP_TRAFFIC 0x00000200 /* send traffic to pppd */ +#define SC_MULTILINK 0x00000400 /* do multilink encapsulation */ +#define SC_MP_SHORTSEQ 0x00000800 /* use short MP sequence numbers */ +#define SC_COMP_RUN 0x00001000 /* compressor has been inited */ +#define SC_DECOMP_RUN 0x00002000 /* decompressor has been inited */ +#define SC_MP_XSHORTSEQ 0x00004000 /* transmit short MP seq numbers */ +#define SC_DEBUG 0x00010000 /* enable debug messages */ +#define SC_LOG_INPKT 0x00020000 /* log contents of good pkts recvd */ +#define SC_LOG_OUTPKT 0x00040000 /* log contents of pkts sent */ +#define SC_LOG_RAWIN 0x00080000 /* log all chars received */ +#define SC_LOG_FLUSH 0x00100000 /* log all chars flushed */ +#define SC_SYNC 0x00200000 /* synchronous serial mode */ +#define SC_MUST_COMP 0x00400000 /* no uncompressed packets may be sent or received */ +#define SC_MASK 0x0f600fff /* bits that user can change */ + +/* state bits */ +#define SC_XMIT_BUSY 0x10000000 /* (used by isdn_ppp?) */ +#define SC_RCV_ODDP 0x08000000 /* have rcvd char with odd parity */ +#define SC_RCV_EVNP 0x04000000 /* have rcvd char with even parity */ +#define SC_RCV_B7_1 0x02000000 /* have rcvd char with bit 7 = 1 */ +#define SC_RCV_B7_0 0x01000000 /* have rcvd char with bit 7 = 0 */ +#define SC_DC_FERROR 0x00800000 /* fatal decomp error detected */ +#define SC_DC_ERROR 0x00400000 /* non-fatal decomp error detected */ + +/* Used with PPPIOCGNPMODE/PPPIOCSNPMODE */ +struct npioctl { + int protocol; /* PPP protocol, e.g. PPP_IP */ + enum NPmode mode; +}; + +/* Structure describing a CCP configuration option, for PPPIOCSCOMPRESS */ +struct ppp_option_data { + __u8 __user *ptr; + __u32 length; + int transmit; +}; + +/* For PPPIOCGL2TPSTATS */ +struct pppol2tp_ioc_stats { + __u16 tunnel_id; /* redundant */ + __u16 session_id; /* if zero, get tunnel stats */ + __u32 using_ipsec:1; /* valid only for session_id == 0 */ + __aligned_u64 tx_packets; + __aligned_u64 tx_bytes; + __aligned_u64 tx_errors; + __aligned_u64 rx_packets; + __aligned_u64 rx_bytes; + __aligned_u64 rx_seq_discards; + __aligned_u64 rx_oos_packets; + __aligned_u64 rx_errors; +}; + +/* + * Ioctl definitions. + */ + +#define PPPIOCGFLAGS _IOR('t', 90, int) /* get configuration flags */ +#define PPPIOCSFLAGS _IOW('t', 89, int) /* set configuration flags */ +#define PPPIOCGASYNCMAP _IOR('t', 88, int) /* get async map */ +#define PPPIOCSASYNCMAP _IOW('t', 87, int) /* set async map */ +#define PPPIOCGUNIT _IOR('t', 86, int) /* get ppp unit number */ +#define PPPIOCGRASYNCMAP _IOR('t', 85, int) /* get receive async map */ +#define PPPIOCSRASYNCMAP _IOW('t', 84, int) /* set receive async map */ +#define PPPIOCGMRU _IOR('t', 83, int) /* get max receive unit */ +#define PPPIOCSMRU _IOW('t', 82, int) /* set max receive unit */ +#define PPPIOCSMAXCID _IOW('t', 81, int) /* set VJ max slot ID */ +#define PPPIOCGXASYNCMAP _IOR('t', 80, ext_accm) /* get extended ACCM */ +#define PPPIOCSXASYNCMAP _IOW('t', 79, ext_accm) /* set extended ACCM */ +#define PPPIOCXFERUNIT _IO('t', 78) /* transfer PPP unit */ +#define PPPIOCSCOMPRESS _IOW('t', 77, struct ppp_option_data) +#define PPPIOCGNPMODE _IOWR('t', 76, struct npioctl) /* get NP mode */ +#define PPPIOCSNPMODE _IOW('t', 75, struct npioctl) /* set NP mode */ +#define PPPIOCSPASS _IOW('t', 71, struct sock_fprog) /* set pass filter */ +#define PPPIOCSACTIVE _IOW('t', 70, struct sock_fprog) /* set active filt */ +#define PPPIOCGDEBUG _IOR('t', 65, int) /* Read debug level */ +#define PPPIOCSDEBUG _IOW('t', 64, int) /* Set debug level */ +#define PPPIOCGIDLE _IOR('t', 63, struct ppp_idle) /* get idle time */ +#define PPPIOCNEWUNIT _IOWR('t', 62, int) /* create new ppp unit */ +#define PPPIOCATTACH _IOW('t', 61, int) /* attach to ppp unit */ +#define PPPIOCDETACH _IOW('t', 60, int) /* detach from ppp unit/chan */ +#define PPPIOCSMRRU _IOW('t', 59, int) /* set multilink MRU */ +#define PPPIOCCONNECT _IOW('t', 58, int) /* connect channel to unit */ +#define PPPIOCDISCONN _IO('t', 57) /* disconnect channel */ +#define PPPIOCATTCHAN _IOW('t', 56, int) /* attach to ppp channel */ +#define PPPIOCGCHAN _IOR('t', 55, int) /* get ppp channel number */ +#define PPPIOCGL2TPSTATS _IOR('t', 54, struct pppol2tp_ioc_stats) + +#define SIOCGPPPSTATS (SIOCDEVPRIVATE + 0) +#define SIOCGPPPVER (SIOCDEVPRIVATE + 1) /* NEVER change this!! */ +#define SIOCGPPPCSTATS (SIOCDEVPRIVATE + 2) + +#endif /* _PPP_IOCTL_H */ -- cgit From 4b32da2bcf1de2b7a196a0e48389d231b4472c36 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Sun, 4 Mar 2012 12:56:55 +0000 Subject: ppp: Replace uses of with Since all that include/linux/if_ppp.h does is #include , this replaces the occurrences of #include with #include . It also corrects an error in Documentation/networking/l2tp.txt, where it referenced include/linux/if_ppp.h as the source of some definitions that are actually now defined in include/linux/if_pppol2tp.h. Signed-off-by: Paul Mackerras Signed-off-by: David S. Miller --- include/linux/isdn.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/isdn.h b/include/linux/isdn.h index 4ccf95d681b4..292f27a793d4 100644 --- a/include/linux/isdn.h +++ b/include/linux/isdn.h @@ -187,7 +187,7 @@ typedef struct { #endif #include -#include +#include #include #endif -- cgit From 0b471506712dd734964b3270d2aa88160712c262 Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Mon, 27 Feb 2012 09:44:48 +0000 Subject: tg3: Recode PCI MRRS adjustment as a PCI quirk This patch recodes the MRRS cap for 5719 A0 devices as a PCI quirk. Signed-off-by: Matt Carlson Signed-off-by: David S. Miller --- include/linux/pci_ids.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 31d77af2ef42..3329965ed63f 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2105,6 +2105,7 @@ #define PCI_DEVICE_ID_NX2_57711E 0x1650 #define PCI_DEVICE_ID_TIGON3_5705 0x1653 #define PCI_DEVICE_ID_TIGON3_5705_2 0x1654 +#define PCI_DEVICE_ID_TIGON3_5719 0x1657 #define PCI_DEVICE_ID_TIGON3_5721 0x1659 #define PCI_DEVICE_ID_TIGON3_5722 0x165a #define PCI_DEVICE_ID_TIGON3_5723 0x165b -- cgit From bce38cd53e5ddba9cb6d708c4ef3d04a4016ec7e Mon Sep 17 00:00:00 2001 From: Stephane Eranian Date: Thu, 9 Feb 2012 23:20:51 +0100 Subject: perf: Add generic taken branch sampling support This patch adds the ability to sample taken branches to the perf_event interface. The ability to capture taken branches is very useful for all sorts of analysis. For instance, basic block profiling, call counts, statistical call graph. This new capability requires hardware assist and as such may not be available on all HW platforms. On Intel x86 it is implemented on top of the Last Branch Record (LBR) facility. To enable taken branches sampling, the PERF_SAMPLE_BRANCH_STACK bit must be set in attr->sample_type. Sampled taken branches may be filtered by type and/or priv levels. The patch adds a new field, called branch_sample_type, to the perf_event_attr structure. It contains a bitmask of filters to apply to the sampled taken branches. Filters may be implemented in HW. If the HW filter does not exist or is not good enough, some arch may also implement a SW filter. The following generic filters are currently defined: - PERF_SAMPLE_USER only branches whose targets are at the user level - PERF_SAMPLE_KERNEL only branches whose targets are at the kernel level - PERF_SAMPLE_HV only branches whose targets are at the hypervisor level - PERF_SAMPLE_ANY any type of branches (subject to priv levels filters) - PERF_SAMPLE_ANY_CALL any call branches (may incl. syscall on some arch) - PERF_SAMPLE_ANY_RET any return branches (may incl. syscall returns on some arch) - PERF_SAMPLE_IND_CALL indirect call branches Obviously filter may be combined. The priv level bits are optional. If not provided, the priv level of the associated event are used. It is possible to collect branches at a priv level different from the associated event. Use of kernel, hv priv levels is subject to permissions and availability (hv). The number of taken branch records present in each sample may vary based on HW, the type of sampled branches, the executed code. Therefore each sample contains the number of taken branches it contains. Signed-off-by: Stephane Eranian Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1328826068-11713-2-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar --- include/linux/perf_event.h | 71 +++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 67 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 64426b71381f..5fc494f4a094 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -129,10 +129,39 @@ enum perf_event_sample_format { PERF_SAMPLE_PERIOD = 1U << 8, PERF_SAMPLE_STREAM_ID = 1U << 9, PERF_SAMPLE_RAW = 1U << 10, + PERF_SAMPLE_BRANCH_STACK = 1U << 11, - PERF_SAMPLE_MAX = 1U << 11, /* non-ABI */ + PERF_SAMPLE_MAX = 1U << 12, /* non-ABI */ }; +/* + * values to program into branch_sample_type when PERF_SAMPLE_BRANCH is set + * + * If the user does not pass priv level information via branch_sample_type, + * the kernel uses the event's priv level. Branch and event priv levels do + * not have to match. Branch priv level is checked for permissions. + * + * The branch types can be combined, however BRANCH_ANY covers all types + * of branches and therefore it supersedes all the other types. + */ +enum perf_branch_sample_type { + PERF_SAMPLE_BRANCH_USER = 1U << 0, /* user branches */ + PERF_SAMPLE_BRANCH_KERNEL = 1U << 1, /* kernel branches */ + PERF_SAMPLE_BRANCH_HV = 1U << 2, /* hypervisor branches */ + + PERF_SAMPLE_BRANCH_ANY = 1U << 3, /* any branch types */ + PERF_SAMPLE_BRANCH_ANY_CALL = 1U << 4, /* any call branch */ + PERF_SAMPLE_BRANCH_ANY_RETURN = 1U << 5, /* any return branch */ + PERF_SAMPLE_BRANCH_IND_CALL = 1U << 6, /* indirect calls */ + + PERF_SAMPLE_BRANCH_MAX = 1U << 7, /* non-ABI */ +}; + +#define PERF_SAMPLE_BRANCH_PLM_ALL \ + (PERF_SAMPLE_BRANCH_USER|\ + PERF_SAMPLE_BRANCH_KERNEL|\ + PERF_SAMPLE_BRANCH_HV) + /* * The format of the data returned by read() on a perf event fd, * as specified by attr.read_format: @@ -240,6 +269,7 @@ struct perf_event_attr { __u64 bp_len; __u64 config2; /* extension of config1 */ }; + __u64 branch_sample_type; /* enum branch_sample_type */ }; /* @@ -458,6 +488,8 @@ enum perf_event_type { * * { u32 size; * char data[size];}&& PERF_SAMPLE_RAW + * + * { u64 from, to, flags } lbr[nr];} && PERF_SAMPLE_BRANCH_STACK * }; */ PERF_RECORD_SAMPLE = 9, @@ -530,12 +562,34 @@ struct perf_raw_record { void *data; }; +/* + * single taken branch record layout: + * + * from: source instruction (may not always be a branch insn) + * to: branch target + * mispred: branch target was mispredicted + * predicted: branch target was predicted + * + * support for mispred, predicted is optional. In case it + * is not supported mispred = predicted = 0. + */ struct perf_branch_entry { - __u64 from; - __u64 to; - __u64 flags; + __u64 from; + __u64 to; + __u64 mispred:1, /* target mispredicted */ + predicted:1,/* target predicted */ + reserved:62; }; +/* + * branch stack layout: + * nr: number of taken branches stored in entries[] + * + * Note that nr can vary from sample to sample + * branches (to, from) are stored from most recent + * to least recent, i.e., entries[0] contains the most + * recent branch. + */ struct perf_branch_stack { __u64 nr; struct perf_branch_entry entries[0]; @@ -566,7 +620,9 @@ struct hw_perf_event { unsigned long event_base; int idx; int last_cpu; + struct hw_perf_event_extra extra_reg; + struct hw_perf_event_extra branch_reg; }; struct { /* software */ struct hrtimer hrtimer; @@ -1007,12 +1063,14 @@ struct perf_sample_data { u64 period; struct perf_callchain_entry *callchain; struct perf_raw_record *raw; + struct perf_branch_stack *br_stack; }; static inline void perf_sample_data_init(struct perf_sample_data *data, u64 addr) { data->addr = addr; data->raw = NULL; + data->br_stack = NULL; } extern void perf_output_sample(struct perf_output_handle *handle, @@ -1151,6 +1209,11 @@ extern void perf_bp_event(struct perf_event *event, void *data); # define perf_instruction_pointer(regs) instruction_pointer(regs) #endif +static inline bool has_branch_stack(struct perf_event *event) +{ + return event->attr.sample_type & PERF_SAMPLE_BRANCH_STACK; +} + extern int perf_output_begin(struct perf_output_handle *handle, struct perf_event *event, unsigned int size); extern void perf_output_end(struct perf_output_handle *handle); -- cgit From d010b3326cf06b3406cdd88af16dcf4e4b6fec2e Mon Sep 17 00:00:00 2001 From: Stephane Eranian Date: Thu, 9 Feb 2012 23:21:00 +0100 Subject: perf: Add callback to flush branch_stack on context switch With branch stack sampling, it is possible to filter by priv levels. In system-wide mode, that means it is possible to capture only user level branches. The builtin SW LBR filter needs to disassemble code based on LBR captured addresses. For that, it needs to know the task the addresses are associated with. Because of context switches, the content of the branch stack buffer may contain addresses from different tasks. We need a callback on context switch to either flush the branch stack or save it. This patch adds a new callback in struct pmu which is called during context switches. The callback is called only when necessary. That is when a system-wide context has, at least, one event which uses PERF_SAMPLE_BRANCH_STACK. The callback is never called for per-thread context. In this version, the Intel x86 code simply flushes (resets) the LBR on context switches (fills it with zeroes). Those zeroed branches are then filtered out by the SW filter. Signed-off-by: Stephane Eranian Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1328826068-11713-11-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar --- include/linux/perf_event.h | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 5fc494f4a094..fbbf5e598368 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -746,6 +746,11 @@ struct pmu { * if no implementation is provided it will default to: event->hw.idx + 1. */ int (*event_idx) (struct perf_event *event); /*optional */ + + /* + * flush branch stack on context-switches (needed in cpu-wide mode) + */ + void (*flush_branch_stack) (void); }; /** @@ -979,7 +984,8 @@ struct perf_event_context { u64 parent_gen; u64 generation; int pin_count; - int nr_cgroups; /* cgroup events present */ + int nr_cgroups; /* cgroup evts */ + int nr_branch_stack; /* branch_stack evt */ struct rcu_head rcu_head; }; @@ -1044,6 +1050,7 @@ perf_event_create_kernel_counter(struct perf_event_attr *attr, extern u64 perf_event_read_value(struct perf_event *event, u64 *enabled, u64 *running); + struct perf_sample_data { u64 type; -- cgit From edd8d90b624e97105d26615d1655da22a3605fff Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Tue, 28 Feb 2012 00:56:04 +0100 Subject: ssb: sprom fix some sizes / signedness Some parts of the sprom struct are bigger than needed. The leddc and maxpwr values are just 8 bit long and not 16. rxpo2g and rxpo5g are signed I got these information for the open source part of the Broadcom SDK covering sprom version 1 to 9. rxpo2g contained a negative number on my bcm5354 based device, this cased an error and Broadcom SDK says this is signed. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville --- include/linux/ssb/ssb.h | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h index bbc2612cb64a..f1696213e3b5 100644 --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h @@ -33,8 +33,8 @@ struct ssb_sprom { u8 et1mdcport; /* MDIO for enet1 */ u16 board_rev; /* Board revision number from SPROM. */ u8 country_code; /* Country Code */ - u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */ - u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ + u8 leddc_on_time; /* LED Powersave Duty Cycle On Count */ + u8 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */ u16 pa0b0; @@ -53,10 +53,10 @@ struct ssb_sprom { u8 gpio1; /* GPIO pin 1 */ u8 gpio2; /* GPIO pin 2 */ u8 gpio3; /* GPIO pin 3 */ - u16 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ - u16 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ - u16 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ - u16 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ + u8 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ + u8 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ + u8 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ + u8 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ u8 itssi_a; /* Idle TSSI Target for A-PHY */ u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */ u8 tri2g; /* 2.4GHz TX isolation */ @@ -67,8 +67,8 @@ struct ssb_sprom { u8 txpid5gl[4]; /* 4.9 - 5.1GHz TX power index */ u8 txpid5g[4]; /* 5.1 - 5.5GHz TX power index */ u8 txpid5gh[4]; /* 5.5 - ...GHz TX power index */ - u8 rxpo2g; /* 2GHz RX power offset */ - u8 rxpo5g; /* 5GHz RX power offset */ + s8 rxpo2g; /* 2GHz RX power offset */ + s8 rxpo5g; /* 5GHz RX power offset */ u8 rssisav2g; /* 2GHz RSSI params */ u8 rssismc2g; u8 rssismf2g; -- cgit From f8f8a660ba501ad14617ccd0d91a1ed8ce54d6d0 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Tue, 28 Feb 2012 00:56:05 +0100 Subject: ssb: remove 5GHz antenna gain from sprom There is no 2.4 GHz or 5GHz antenna gain stored in sprom. The sprom just stores the gain values for antenna 1 and 2 or 1 to 4 for more recent sprom versions. On old devices antenna 2 was used for 5 GHz wifi. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville --- include/linux/ssb/ssb.h | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h index f1696213e3b5..1de56757e949 100644 --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h @@ -94,12 +94,7 @@ struct ssb_sprom { * on each band. Values in dBm/4 (Q5.2). Negative gain means the * loss in the connectors is bigger than the gain. */ struct { - struct { - s8 a0, a1, a2, a3; - } ghz24; /* 2.4GHz band */ - struct { - s8 a0, a1, a2, a3; - } ghz5; /* 5GHz band */ + s8 a0, a1, a2, a3; } antenna_gain; struct { -- cgit From 3b64e6f9050ff87a746c8e07dc04d97c7f26c5e2 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Tue, 28 Feb 2012 00:56:06 +0100 Subject: ssb: fix per path sprom vars On sprom version 4 and 5 there are 4 values for pa_2g, pa_5gl, pa_5g and pa_5gh, for sprom version 8 and 9 there are only 3. Make the per path sprom store also work for older sprom versions. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville --- include/linux/ssb/ssb.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h index 1de56757e949..49284192521b 100644 --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h @@ -19,7 +19,7 @@ struct ssb_driver; struct ssb_sprom_core_pwr_info { u8 itssi_2g, itssi_5g; u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh; - u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3]; + u16 pa_2g[4], pa_5gl[4], pa_5g[4], pa_5gh[4]; }; struct ssb_sprom { -- cgit From 03a5642b6a578d8de355b77efff49bbc45b8be6d Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Tue, 28 Feb 2012 00:56:07 +0100 Subject: ssb: add alpha2 This member contains the country code encoded with two chars Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville --- include/linux/ssb/ssb.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h index 49284192521b..d658de45ffb9 100644 --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h @@ -33,6 +33,7 @@ struct ssb_sprom { u8 et1mdcport; /* MDIO for enet1 */ u16 board_rev; /* Board revision number from SPROM. */ u8 country_code; /* Country Code */ + char alpha2[2]; /* Country Code as two chars like EU or US */ u8 leddc_on_time; /* LED Powersave Duty Cycle On Count */ u8 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ -- cgit From 52aa63f5322aab23e07a52ff8ddd246d34799eb5 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Tue, 28 Feb 2012 00:56:08 +0100 Subject: ssb: add some missing sprom attributes This patch extends the sprom struct to contain all sprom attributes found in sprom version 1 to 9. This was done accordingly to the open source part of the Broadcom SDK. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville --- include/linux/ssb/ssb.h | 76 ++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 75 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h index d658de45ffb9..d27683180025 100644 --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h @@ -32,6 +32,8 @@ struct ssb_sprom { u8 et0mdcport; /* MDIO for enet0 */ u8 et1mdcport; /* MDIO for enet1 */ u16 board_rev; /* Board revision number from SPROM. */ + u16 board_num; /* Board number from SPROM. */ + u16 board_type; /* Board type from SPROM. */ u8 country_code; /* Country Code */ char alpha2[2]; /* Country Code as two chars like EU or US */ u8 leddc_on_time; /* LED Powersave Duty Cycle On Count */ @@ -107,7 +109,79 @@ struct ssb_sprom { } ghz5; } fem; - /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ + u16 mcs2gpo[8]; + u16 mcs5gpo[8]; + u16 mcs5glpo[8]; + u16 mcs5ghpo[8]; + u8 opo; + + u8 rxgainerr2ga[3]; + u8 rxgainerr5gla[3]; + u8 rxgainerr5gma[3]; + u8 rxgainerr5gha[3]; + u8 rxgainerr5gua[3]; + + u8 noiselvl2ga[3]; + u8 noiselvl5gla[3]; + u8 noiselvl5gma[3]; + u8 noiselvl5gha[3]; + u8 noiselvl5gua[3]; + + u8 regrev; + u8 txchain; + u8 rxchain; + u8 antswitch; + u16 cddpo; + u16 stbcpo; + u16 bw40po; + u16 bwduppo; + + u8 tempthresh; + u8 tempoffset; + u16 rawtempsense; + u8 measpower; + u8 tempsense_slope; + u8 tempcorrx; + u8 tempsense_option; + u8 freqoffset_corr; + u8 iqcal_swp_dis; + u8 hw_iqcal_en; + u8 elna2g; + u8 elna5g; + u8 phycal_tempdelta; + u8 temps_period; + u8 temps_hysteresis; + u8 measpower1; + u8 measpower2; + u8 pcieingress_war; + + /* power per rate from sromrev 9 */ + u16 cckbw202gpo; + u16 cckbw20ul2gpo; + u32 legofdmbw202gpo; + u32 legofdmbw20ul2gpo; + u32 legofdmbw205glpo; + u32 legofdmbw20ul5glpo; + u32 legofdmbw205gmpo; + u32 legofdmbw20ul5gmpo; + u32 legofdmbw205ghpo; + u32 legofdmbw20ul5ghpo; + u32 mcsbw202gpo; + u32 mcsbw20ul2gpo; + u32 mcsbw402gpo; + u32 mcsbw205glpo; + u32 mcsbw20ul5glpo; + u32 mcsbw405glpo; + u32 mcsbw205gmpo; + u32 mcsbw20ul5gmpo; + u32 mcsbw405gmpo; + u32 mcsbw205ghpo; + u32 mcsbw20ul5ghpo; + u32 mcsbw405ghpo; + u16 mcs32po; + u16 legofdm40duppo; + u8 sar2g; + u8 sar5g; }; /* Information about the PCB the circuitry is soldered on. */ -- cgit From 1c9351cf2180924c91bb85e5ba607f24a3d875b1 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Tue, 28 Feb 2012 00:56:09 +0100 Subject: bcma: export bcma_find_core This function is needed by the bcm47xx arch code to get the number of the ieee80211 core. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville --- include/linux/bcma/bcma.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h index b9f65fbee42f..46bbd088c4ad 100644 --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -284,6 +284,7 @@ static inline void bcma_maskset16(struct bcma_device *cc, bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set); } +extern struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid); extern bool bcma_core_is_enabled(struct bcma_device *core); extern void bcma_core_disable(struct bcma_device *core, u32 flags); extern int bcma_core_enable(struct bcma_device *core, u32 flags); -- cgit From a027237a56f7d519eee5749cfb720e568d0bb0b6 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Tue, 28 Feb 2012 00:56:10 +0100 Subject: bcma: add support for sprom not found on the device On SoCs the sprom is stored in the nvram in a special partition on the flash chip. The nvram contains the sprom for the main bus, but sometimes also for a pci devices using bcma. This patch makes it possible for the arch code to register a function to fetch the needed sprom from the nvram and provide it to the bcma code. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville --- include/linux/bcma/bcma.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h index 46bbd088c4ad..5af9a075498f 100644 --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -176,6 +176,12 @@ int __bcma_driver_register(struct bcma_driver *drv, struct module *owner); extern void bcma_driver_unregister(struct bcma_driver *drv); +/* Set a fallback SPROM. + * See kdoc at the function definition for complete documentation. */ +extern int bcma_arch_register_fallback_sprom( + int (*sprom_callback)(struct bcma_bus *bus, + struct ssb_sprom *out)); + struct bcma_bus { /* The MMIO area. */ void __iomem *mmio; -- cgit From 5533513784a88049e19dd2ab380a452b61e5171e Mon Sep 17 00:00:00 2001 From: Ashok Nagarajan Date: Tue, 28 Feb 2012 17:04:08 -0800 Subject: {nl,cfg,mac}80211: Implement RSSI threshold for mesh peering Mesh peer links are established only if average rssi of the peer candidate satisfies the threshold. This is not in 802.11s specification but was requested by David Fulgham, an open80211s user. This is a way to avoid marginal peer links with stations that are barely within range. This patch adds a new mesh configuration parameter, mesh_rssi_threshold. This feature is supported only for hardwares that report signal in dBm. Signed-off-by: Ashok Nagarajan Signed-off-by: Javier Cardona Signed-off-by: John W. Linville --- include/linux/nl80211.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index be35a68746a7..38fda5ee57f5 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -2112,6 +2112,10 @@ enum nl80211_mntr_flags { * @NL80211_MESHCONF_FORWARDING: set Mesh STA as forwarding or non-forwarding * or forwarding entity (default is TRUE - forwarding entity) * + * @NL80211_MESHCONF_RSSI_THRESHOLD: RSSI threshold in dBm. This specifies the + * threshold for average signal strength of candidate station to establish + * a peer link. + * * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute * * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use @@ -2137,6 +2141,7 @@ enum nl80211_meshconf_params { NL80211_MESHCONF_GATE_ANNOUNCEMENTS, NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL, NL80211_MESHCONF_FORWARDING, + NL80211_MESHCONF_RSSI_THRESHOLD, /* keep last */ __NL80211_MESHCONF_ATTR_AFTER_LAST, -- cgit From 77a1abf54f4b003ad6e59c535045b2ad89fedfeb Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 5 Mar 2012 04:50:09 +0000 Subject: net: export netdev_stats_to_stats64 Some drivers use internal netdev stats member to store part of their stats, yet advertize ndo_get_stats64() to implement some 64bit fields. Allow them to use netdev_stats_to_stats64() helper to make the copy of netdev stats before they compute their 64bit counters. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/netdevice.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index f1b7d037c2c5..4d279c5287f8 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2557,6 +2557,8 @@ extern void dev_load(struct net *net, const char *name); extern void dev_mcast_init(void); extern struct rtnl_link_stats64 *dev_get_stats(struct net_device *dev, struct rtnl_link_stats64 *storage); +extern void netdev_stats_to_stats64(struct rtnl_link_stats64 *stats64, + const struct net_device_stats *netdev_stats); extern int netdev_max_backlog; extern int netdev_tstamp_prequeue; -- cgit From 1b658f118b11de3c4052ed8cbdd5803cd1fa5670 Mon Sep 17 00:00:00 2001 From: Vasanthakumar Thiagarajan Date: Fri, 2 Mar 2012 15:50:02 +0530 Subject: cfg80211: Add an attribute to set inactivity timeout in AP mode This patch adds an attribute, NL80211_ATTR_INACTIVITY_TIMEOUT, to set the inactivity timeout which can be used to remove the station in AP mode. This can be passed in NL80211_CMD_START_AP and used by the drivers which have AP MLME in firmware but don't support get_station() properly. To disable inactivity timer in userspace, wpa_s for example, there is a new flag, NL80211_FEATURE_INACTIVITY_TIMER, in nl80211_feature_flags through which drivers can register their capability to use the inactivity timeout to free the stations. Signed-off-by: Vasanthakumar Thiagarajan Acked-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/nl80211.h | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 38fda5ee57f5..9f46c62b1eee 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -168,8 +168,8 @@ * %NL80211_ATTR_DTIM_PERIOD, %NL80211_ATTR_SSID, * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE, * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS, - * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY and - * %NL80211_ATTR_AUTH_TYPE. + * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY, + * %NL80211_ATTR_AUTH_TYPE and %NL80211_ATTR_INACTIVITY_TIMEOUT. * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP @@ -1197,6 +1197,12 @@ enum nl80211_commands { * @NL80211_ATTR_NOACK_MAP: This u16 bitmap contains the No Ack Policy of * up to 16 TIDs. * + * @NL80211_ATTR_INACTIVITY_TIMEOUT: timeout value in seconds, this can be + * used by the drivers which has MLME in firmware and does not have support + * to report per station tx/rx activity to free up the staion entry from + * the list. This needs to be used when the driver advertises the + * capability to timeout the stations. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1442,6 +1448,8 @@ enum nl80211_attrs { NL80211_ATTR_NOACK_MAP, + NL80211_ATTR_INACTIVITY_TIMEOUT, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -2809,10 +2817,13 @@ enum nl80211_ap_sme_features { * TX status to the socket error queue when requested with the * socket option. * @NL80211_FEATURE_HT_IBSS: This driver supports IBSS with HT datarates. + * @NL80211_FEATURE_INACTIVITY_TIMER: This driver takes care of freeing up + * the connected inactive stations in AP mode. */ enum nl80211_feature_flags { NL80211_FEATURE_SK_TX_STATUS = 1 << 0, NL80211_FEATURE_HT_IBSS = 1 << 1, + NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2, }; /** -- cgit From 804483e90794256f9ed53e795ffbf1e94de237c8 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 5 Mar 2012 22:18:41 +0100 Subject: cfg80211/mac80211: report signal strength for mgmt frames Add the signal strength (in dBm only for now) to frames that are received via nl80211's various frame APIs. Signed-off-by: Johannes Berg Acked-by: Kalle Valo Signed-off-by: John W. Linville --- include/linux/nl80211.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 9f46c62b1eee..c37d67add090 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -1203,6 +1203,10 @@ enum nl80211_commands { * the list. This needs to be used when the driver advertises the * capability to timeout the stations. * + * @NL80211_ATTR_RX_SIGNAL_DBM: signal strength in dBm (as a 32-bit int); + * this attribute is (depending on the driver capabilities) added to + * received frames indicated with %NL80211_CMD_FRAME. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1450,6 +1454,8 @@ enum nl80211_attrs { NL80211_ATTR_INACTIVITY_TIMEOUT, + NL80211_ATTR_RX_SIGNAL_DBM, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -- cgit From 10d8493cd9efd38b1947b7a74276dbdc8311aa1a Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Tue, 6 Mar 2012 15:50:48 +0100 Subject: bcma: add support for on-chip OTP memory used for SPROM storage Wireless Broadcom chips can have either their SPROM data stored on either external SPROM or on-chip OTP memory. Both are accessed through the same register space. This patch adds support for the on-chip OTP memory. Tested with: BCM43224 OTP and SPROM BCM4331 SPROM BCM4313 OTP This patch is in response to linux-wireless thread [1]. [1] http://article.gmane.org/gmane.linux.kernel.wireless.general/85426 Tested-by: Saul St. John Tested-by: Rafal Milecki Tested-by: Hauke Mehrtens Cc: Larry Finger Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- include/linux/bcma/bcma_driver_chipcommon.h | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index e72938b10714..8bbfe31fbac8 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -56,6 +56,9 @@ #define BCMA_CC_OTPS_HW_PROTECT 0x00000001 #define BCMA_CC_OTPS_SW_PROTECT 0x00000002 #define BCMA_CC_OTPS_CID_PROTECT 0x00000004 +#define BCMA_CC_OTPS_GU_PROG_IND 0x00000F00 /* General Use programmed indication */ +#define BCMA_CC_OTPS_GU_PROG_IND_SHIFT 8 +#define BCMA_CC_OTPS_GU_PROG_HW 0x00000100 /* HW region programmed */ #define BCMA_CC_OTPC 0x0014 /* OTP control */ #define BCMA_CC_OTPC_RECWAIT 0xFF000000 #define BCMA_CC_OTPC_PROGWAIT 0x00FFFF00 @@ -72,6 +75,8 @@ #define BCMA_CC_OTPP_READ 0x40000000 #define BCMA_CC_OTPP_START 0x80000000 #define BCMA_CC_OTPP_BUSY 0x80000000 +#define BCMA_CC_OTPL 0x001C /* OTP layout */ +#define BCMA_CC_OTPL_GURGN_OFFSET 0x00000FFF /* offset of general use region */ #define BCMA_CC_IRQSTAT 0x0020 #define BCMA_CC_IRQMASK 0x0024 #define BCMA_CC_IRQ_GPIO 0x00000001 /* gpio intr */ @@ -79,6 +84,10 @@ #define BCMA_CC_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */ #define BCMA_CC_CHIPCTL 0x0028 /* Rev >= 11 only */ #define BCMA_CC_CHIPSTAT 0x002C /* Rev >= 11 only */ +#define BCMA_CC_CHIPST_4313_SPROM_PRESENT 1 +#define BCMA_CC_CHIPST_4313_OTP_PRESENT 2 +#define BCMA_CC_CHIPST_4331_SPROM_PRESENT 2 +#define BCMA_CC_CHIPST_4331_OTP_PRESENT 4 #define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */ #define BCMA_CC_JCMD_START 0x80000000 #define BCMA_CC_JCMD_BUSY 0x80000000 @@ -256,7 +265,6 @@ #define BCMA_CC_PLLCTL_ADDR 0x0660 #define BCMA_CC_PLLCTL_DATA 0x0664 #define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ -#define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */ /* Divider allocation in 4716/47162/5356 */ #define BCMA_CC_PMU5_MAINPLL_CPU 1 -- cgit From c970a1ac4e75a5d31c7b6e8e9f0bb192b0a511e7 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Mon, 5 Mar 2012 01:03:34 +0100 Subject: NFC: Add device powered netlink attribute For user space to know if a device is up or down. Signed-off-by: Samuel Ortiz Signed-off-by: John W. Linville --- include/linux/nfc.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/nfc.h b/include/linux/nfc.h index b4999abcb2a2..39c1fcf089c0 100644 --- a/include/linux/nfc.h +++ b/include/linux/nfc.h @@ -107,6 +107,7 @@ enum nfc_attrs { NFC_ATTR_TARGET_SENSF_RES, NFC_ATTR_COMM_MODE, NFC_ATTR_RF_MODE, + NFC_ATTR_DEVICE_POWERED, /* private: internal use only */ __NFC_ATTR_AFTER_LAST }; -- cgit From 9a9a232a9295deb3b6b5f4ce4290a7d05ff061fa Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Tue, 6 Mar 2012 04:04:47 +0000 Subject: net/mlx4: fixing sparse warnings for not declared, functions The SET_PORT functions are implemented in port.c, which is part of mlx4_core, these functions are exported. The functions are in use by the mlx4_en module (were originally part of mlx4_en). Their declaration remained in mlx4_en module, moving the declaration to the right location. Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller --- include/linux/mlx4/device.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index aea61905499b..44d8144e9ae8 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -622,7 +622,10 @@ int mlx4_replace_mac(struct mlx4_dev *dev, u8 port, int qpn, u64 new_mac); int mlx4_get_eth_qp(struct mlx4_dev *dev, u8 port, u64 mac, int *qpn); void mlx4_put_eth_qp(struct mlx4_dev *dev, u8 port, u64 mac, int qpn); void mlx4_set_stats_bitmap(struct mlx4_dev *dev, u64 *stats_bitmap); - +int mlx4_SET_PORT_general(struct mlx4_dev *dev, u8 port, int mtu, + u8 pptx, u8 pfctx, u8 pprx, u8 pfcrx); +int mlx4_SET_PORT_qpn_calc(struct mlx4_dev *dev, u8 port, u32 base_qpn, + u8 promisc); int mlx4_find_cached_vlan(struct mlx4_dev *dev, u8 port, u16 vid, int *idx); int mlx4_register_vlan(struct mlx4_dev *dev, u8 port, u16 vlan, int *index); void mlx4_unregister_vlan(struct mlx4_dev *dev, u8 port, int index); -- cgit From 95f050bf7f64be5168ae2e2c715bb0b0ded141d1 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 6 Mar 2012 16:12:15 -0500 Subject: net: Use bool for return value of dev_valid_name(). Signed-off-by: David S. Miller --- include/linux/netdevice.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 4d279c5287f8..a89933bc4f2f 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2122,7 +2122,7 @@ extern int netdev_rx_handler_register(struct net_device *dev, void *rx_handler_data); extern void netdev_rx_handler_unregister(struct net_device *dev); -extern int dev_valid_name(const char *name); +extern bool dev_valid_name(const char *name); extern int dev_ioctl(struct net *net, unsigned int cmd, void __user *); extern int dev_ethtool(struct net *net, struct ifreq *); extern unsigned dev_get_flags(const struct net_device *); -- cgit From 95468fd41a8930743180ea3560f4c601d4174275 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 5 Mar 2012 15:06:02 -0800 Subject: writeback: fix typo in the writeback_control comment Signed-off-by: Andrew Morton Signed-off-by: Fengguang Wu Signed-off-by: Jiri Kosina --- include/linux/writeback.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/writeback.h b/include/linux/writeback.h index 995b8bf630ac..a2b84f598e2b 100644 --- a/include/linux/writeback.h +++ b/include/linux/writeback.h @@ -64,7 +64,7 @@ struct writeback_control { long pages_skipped; /* Pages which were not written */ /* - * For a_ops->writepages(): is start or end are non-zero then this is + * For a_ops->writepages(): if start or end are non-zero then this is * a hint that the filesystem need only write out the pages inside that * byterange. The byte at `end' is included in the writeout request. */ -- cgit From c15f1c83251049182b1771da004d14f29683ab97 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Tue, 14 Feb 2012 00:24:10 +0100 Subject: netfilter: ipset: use NFPROTO_ constants ipset is actually using NFPROTO values rather than AF (xt_set passes that along). Signed-off-by: Jan Engelhardt Signed-off-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter/ipset/ip_set.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/netfilter/ipset/ip_set.h b/include/linux/netfilter/ipset/ip_set.h index 3540c6e262f7..e7b06f52be84 100644 --- a/include/linux/netfilter/ipset/ip_set.h +++ b/include/linux/netfilter/ipset/ip_set.h @@ -288,7 +288,10 @@ struct ip_set_type { u8 features; /* Set type dimension */ u8 dimension; - /* Supported family: may be AF_UNSPEC for both AF_INET/AF_INET6 */ + /* + * Supported family: may be NFPROTO_UNSPEC for both + * NFPROTO_IPV4/NFPROTO_IPV6. + */ u8 family; /* Type revisions */ u8 revision_min, revision_max; -- cgit From ae8ded1cb88b9c24f3c9552ca9eefd894b069716 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Sat, 14 Jan 2012 16:26:20 +0100 Subject: netfilter: ipset: expose userspace-relevant parts in ip_set.h iptables's libxt_SET.c depends on these. Signed-off-by: Jan Engelhardt Signed-off-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter/ipset/ip_set.h | 26 ++++++++++++++------------ 1 file changed, 14 insertions(+), 12 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netfilter/ipset/ip_set.h b/include/linux/netfilter/ipset/ip_set.h index e7b06f52be84..e921766d3aff 100644 --- a/include/linux/netfilter/ipset/ip_set.h +++ b/include/linux/netfilter/ipset/ip_set.h @@ -11,6 +11,8 @@ * published by the Free Software Foundation. */ +#include + /* The protocol version */ #define IPSET_PROTOCOL 6 @@ -168,19 +170,10 @@ enum ipset_adt { IPSET_CADT_MAX, }; -#ifdef __KERNEL__ -#include -#include -#include -#include -#include -#include -#include - /* Sets are identified by an index in kernel space. Tweak with ip_set_id_t * and IPSET_INVALID_ID if you want to increase the max number of sets. */ -typedef u16 ip_set_id_t; +typedef __u16 ip_set_id_t; #define IPSET_INVALID_ID 65535 @@ -203,6 +196,15 @@ enum ip_set_kopt { IPSET_DIM_THREE_SRC = (1 << IPSET_DIM_THREE), }; +#ifdef __KERNEL__ +#include +#include +#include +#include +#include +#include +#include + /* Set features */ enum ip_set_feature { IPSET_TYPE_IP_FLAG = 0, @@ -453,6 +455,8 @@ bitmap_bytes(u32 a, u32 b) return 4 * ((((b - a + 8) / 8) + 3) / 4); } +#endif /* __KERNEL__ */ + /* Interface to iptables/ip6tables */ #define SO_IP_SET 83 @@ -478,6 +482,4 @@ struct ip_set_req_version { unsigned version; }; -#endif /* __KERNEL__ */ - #endif /*_IP_SET_H */ -- cgit From 0927a1ac63388271d58e9f7352d71434e1271374 Mon Sep 17 00:00:00 2001 From: Jozsef Kadlecsik Date: Tue, 10 Jan 2012 17:04:32 +0100 Subject: netfilter: ipset: Log warning when a hash type of set gets full If the set is full, the SET target cannot add more elements. Log warning so that the admin got notified about it. Signed-off-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter/ipset/ip_set_ahash.h | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netfilter/ipset/ip_set_ahash.h b/include/linux/netfilter/ipset/ip_set_ahash.h index b89fb79cb44f..bd1fc8d16851 100644 --- a/include/linux/netfilter/ipset/ip_set_ahash.h +++ b/include/linux/netfilter/ipset/ip_set_ahash.h @@ -353,9 +353,12 @@ retry: htable_bits++; pr_debug("attempt to resize set %s from %u to %u, t %p\n", set->name, orig->htable_bits, htable_bits, orig); - if (!htable_bits) + if (!htable_bits) { /* In case we have plenty of memory :-) */ + pr_warning("Cannot increase the hashsize of set %s further\n", + set->name); return -IPSET_ERR_HASH_FULL; + } t = ip_set_alloc(sizeof(*t) + jhash_size(htable_bits) * sizeof(struct hbucket)); if (!t) @@ -407,8 +410,12 @@ type_pf_add(struct ip_set *set, void *value, u32 timeout, u32 flags) int i, ret = 0; u32 key, multi = 0; - if (h->elements >= h->maxelem) + if (h->elements >= h->maxelem) { + if (net_ratelimit()) + pr_warning("Set %s is full, maxelem %u reached\n", + set->name, h->maxelem); return -IPSET_ERR_HASH_FULL; + } rcu_read_lock_bh(); t = rcu_dereference_bh(h->table); @@ -790,9 +797,12 @@ type_pf_tresize(struct ip_set *set, bool retried) retry: ret = 0; htable_bits++; - if (!htable_bits) + if (!htable_bits) { /* In case we have plenty of memory :-) */ + pr_warning("Cannot increase the hashsize of set %s further\n", + set->name); return -IPSET_ERR_HASH_FULL; + } t = ip_set_alloc(sizeof(*t) + jhash_size(htable_bits) * sizeof(struct hbucket)); if (!t) @@ -843,8 +853,12 @@ type_pf_tadd(struct ip_set *set, void *value, u32 timeout, u32 flags) if (h->elements >= h->maxelem) /* FIXME: when set is full, we slow down here */ type_pf_expire(h); - if (h->elements >= h->maxelem) + if (h->elements >= h->maxelem) { + if (net_ratelimit()) + pr_warning("Set %s is full, maxelem %u reached\n", + set->name, h->maxelem); return -IPSET_ERR_HASH_FULL; + } rcu_read_lock_bh(); t = rcu_dereference_bh(h->table); -- cgit From 2a7cef2a4ba64b9bf0ff9aeaa364554716c06669 Mon Sep 17 00:00:00 2001 From: Jozsef Kadlecsik Date: Sat, 14 Jan 2012 17:16:36 +0100 Subject: netfilter: ipset: Exceptions support added to hash:*net* types The "nomatch" keyword and option is added to the hash:*net* types, by which one can add exception entries to sets. Example: ipset create test hash:net ipset add test 192.168.0/24 ipset add test 192.168.0/30 nomatch In this case the IP addresses from 192.168.0/24 except 192.168.0/30 match the elements of the set. Signed-off-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter/ipset/ip_set.h | 4 ++ include/linux/netfilter/ipset/ip_set_ahash.h | 89 +++++++++++++++++++++------- 2 files changed, 70 insertions(+), 23 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netfilter/ipset/ip_set.h b/include/linux/netfilter/ipset/ip_set.h index e921766d3aff..2f8e18a23227 100644 --- a/include/linux/netfilter/ipset/ip_set.h +++ b/include/linux/netfilter/ipset/ip_set.h @@ -150,6 +150,7 @@ enum ipset_cmd_flags { IPSET_FLAG_LIST_SETNAME = (1 << IPSET_FLAG_BIT_LIST_SETNAME), IPSET_FLAG_BIT_LIST_HEADER = 2, IPSET_FLAG_LIST_HEADER = (1 << IPSET_FLAG_BIT_LIST_HEADER), + IPSET_FLAG_CMD_MAX = 15, /* Lower half */ }; /* Flags at CADT attribute level */ @@ -158,6 +159,9 @@ enum ipset_cadt_flags { IPSET_FLAG_BEFORE = (1 << IPSET_FLAG_BIT_BEFORE), IPSET_FLAG_BIT_PHYSDEV = 1, IPSET_FLAG_PHYSDEV = (1 << IPSET_FLAG_BIT_PHYSDEV), + IPSET_FLAG_BIT_NOMATCH = 2, + IPSET_FLAG_NOMATCH = (1 << IPSET_FLAG_BIT_NOMATCH), + IPSET_FLAG_CADT_MAX = 15, /* Upper half */ }; /* Commands with settype-specific attributes */ diff --git a/include/linux/netfilter/ipset/ip_set_ahash.h b/include/linux/netfilter/ipset/ip_set_ahash.h index bd1fc8d16851..0e5c3cf7618a 100644 --- a/include/linux/netfilter/ipset/ip_set_ahash.h +++ b/include/linux/netfilter/ipset/ip_set_ahash.h @@ -113,6 +113,12 @@ htable_bits(u32 hashsize) } #ifdef IP_SET_HASH_WITH_NETS +#ifdef IP_SET_HASH_WITH_NETS_PACKED +/* When cidr is packed with nomatch, cidr - 1 is stored in the entry */ +#define CIDR(cidr) (cidr + 1) +#else +#define CIDR(cidr) (cidr) +#endif #define SET_HOST_MASK(family) (family == AF_INET ? 32 : 128) @@ -262,6 +268,12 @@ ip_set_hash_destroy(struct ip_set *set) #define type_pf_data_list TOKEN(TYPE, PF, _data_list) #define type_pf_data_tlist TOKEN(TYPE, PF, _data_tlist) #define type_pf_data_next TOKEN(TYPE, PF, _data_next) +#define type_pf_data_flags TOKEN(TYPE, PF, _data_flags) +#ifdef IP_SET_HASH_WITH_NETS +#define type_pf_data_match TOKEN(TYPE, PF, _data_match) +#else +#define type_pf_data_match(d) 1 +#endif #define type_pf_elem TOKEN(TYPE, PF, _elem) #define type_pf_telem TOKEN(TYPE, PF, _telem) @@ -308,8 +320,10 @@ ip_set_hash_destroy(struct ip_set *set) * we spare the maintenance of the internal counters. */ static int type_pf_elem_add(struct hbucket *n, const struct type_pf_elem *value, - u8 ahash_max) + u8 ahash_max, u32 cadt_flags) { + struct type_pf_elem *data; + if (n->pos >= n->size) { void *tmp; @@ -330,7 +344,13 @@ type_pf_elem_add(struct hbucket *n, const struct type_pf_elem *value, n->value = tmp; n->size += AHASH_INIT_SIZE; } - type_pf_data_copy(ahash_data(n, n->pos++), value); + data = ahash_data(n, n->pos++); + type_pf_data_copy(data, value); +#ifdef IP_SET_HASH_WITH_NETS + /* Resizing won't overwrite stored flags */ + if (cadt_flags) + type_pf_data_flags(data, cadt_flags); +#endif return 0; } @@ -371,7 +391,7 @@ retry: for (j = 0; j < n->pos; j++) { data = ahash_data(n, j); m = hbucket(t, HKEY(data, h->initval, htable_bits)); - ret = type_pf_elem_add(m, data, AHASH_MAX(h)); + ret = type_pf_elem_add(m, data, AHASH_MAX(h), 0); if (ret < 0) { read_unlock_bh(&set->lock); ahash_destroy(t); @@ -409,6 +429,7 @@ type_pf_add(struct ip_set *set, void *value, u32 timeout, u32 flags) struct hbucket *n; int i, ret = 0; u32 key, multi = 0; + u32 cadt_flags = flags >> 16; if (h->elements >= h->maxelem) { if (net_ratelimit()) @@ -423,11 +444,17 @@ type_pf_add(struct ip_set *set, void *value, u32 timeout, u32 flags) n = hbucket(t, key); for (i = 0; i < n->pos; i++) if (type_pf_data_equal(ahash_data(n, i), d, &multi)) { +#ifdef IP_SET_HASH_WITH_NETS + if (flags & IPSET_FLAG_EXIST) + /* Support overwriting just the flags */ + type_pf_data_flags(ahash_data(n, i), + cadt_flags); +#endif ret = -IPSET_ERR_EXIST; goto out; } TUNE_AHASH_MAX(h, multi); - ret = type_pf_elem_add(n, value, AHASH_MAX(h)); + ret = type_pf_elem_add(n, value, AHASH_MAX(h), cadt_flags); if (ret != 0) { if (ret == -EAGAIN) type_pf_data_next(h, d); @@ -435,7 +462,7 @@ type_pf_add(struct ip_set *set, void *value, u32 timeout, u32 flags) } #ifdef IP_SET_HASH_WITH_NETS - add_cidr(h, d->cidr, HOST_MASK); + add_cidr(h, CIDR(d->cidr), HOST_MASK); #endif h->elements++; out: @@ -470,7 +497,7 @@ type_pf_del(struct ip_set *set, void *value, u32 timeout, u32 flags) n->pos--; h->elements--; #ifdef IP_SET_HASH_WITH_NETS - del_cidr(h, d->cidr, HOST_MASK); + del_cidr(h, CIDR(d->cidr), HOST_MASK); #endif if (n->pos + AHASH_INIT_SIZE < n->size) { void *tmp = kzalloc((n->size - AHASH_INIT_SIZE) @@ -513,7 +540,7 @@ type_pf_test_cidrs(struct ip_set *set, struct type_pf_elem *d, u32 timeout) for (i = 0; i < n->pos; i++) { data = ahash_data(n, i); if (type_pf_data_equal(data, d, &multi)) - return 1; + return type_pf_data_match(data); } } return 0; @@ -535,7 +562,7 @@ type_pf_test(struct ip_set *set, void *value, u32 timeout, u32 flags) #ifdef IP_SET_HASH_WITH_NETS /* If we test an IP address and not a network address, * try all possible network sizes */ - if (d->cidr == SET_HOST_MASK(set->family)) + if (CIDR(d->cidr) == SET_HOST_MASK(set->family)) return type_pf_test_cidrs(set, d, timeout); #endif @@ -544,7 +571,7 @@ type_pf_test(struct ip_set *set, void *value, u32 timeout, u32 flags) for (i = 0; i < n->pos; i++) { data = ahash_data(n, i); if (type_pf_data_equal(data, d, &multi)) - return 1; + return type_pf_data_match(data); } return 0; } @@ -700,7 +727,7 @@ type_pf_data_timeout_set(struct type_pf_elem *data, u32 timeout) static int type_pf_elem_tadd(struct hbucket *n, const struct type_pf_elem *value, - u8 ahash_max, u32 timeout) + u8 ahash_max, u32 cadt_flags, u32 timeout) { struct type_pf_elem *data; @@ -727,6 +754,11 @@ type_pf_elem_tadd(struct hbucket *n, const struct type_pf_elem *value, data = ahash_tdata(n, n->pos++); type_pf_data_copy(data, value); type_pf_data_timeout_set(data, timeout); +#ifdef IP_SET_HASH_WITH_NETS + /* Resizing won't overwrite stored flags */ + if (cadt_flags) + type_pf_data_flags(data, cadt_flags); +#endif return 0; } @@ -747,7 +779,7 @@ type_pf_expire(struct ip_set_hash *h) if (type_pf_data_expired(data)) { pr_debug("expired %u/%u\n", i, j); #ifdef IP_SET_HASH_WITH_NETS - del_cidr(h, data->cidr, HOST_MASK); + del_cidr(h, CIDR(data->cidr), HOST_MASK); #endif if (j != n->pos - 1) /* Not last one */ @@ -815,7 +847,7 @@ retry: for (j = 0; j < n->pos; j++) { data = ahash_tdata(n, j); m = hbucket(t, HKEY(data, h->initval, htable_bits)); - ret = type_pf_elem_tadd(m, data, AHASH_MAX(h), + ret = type_pf_elem_tadd(m, data, AHASH_MAX(h), 0, type_pf_data_timeout(data)); if (ret < 0) { read_unlock_bh(&set->lock); @@ -849,6 +881,7 @@ type_pf_tadd(struct ip_set *set, void *value, u32 timeout, u32 flags) int ret = 0, i, j = AHASH_MAX(h) + 1; bool flag_exist = flags & IPSET_FLAG_EXIST; u32 key, multi = 0; + u32 cadt_flags = flags >> 16; if (h->elements >= h->maxelem) /* FIXME: when set is full, we slow down here */ @@ -868,6 +901,7 @@ type_pf_tadd(struct ip_set *set, void *value, u32 timeout, u32 flags) data = ahash_tdata(n, i); if (type_pf_data_equal(data, d, &multi)) { if (type_pf_data_expired(data) || flag_exist) + /* Just timeout value may be updated */ j = i; else { ret = -IPSET_ERR_EXIST; @@ -880,15 +914,18 @@ type_pf_tadd(struct ip_set *set, void *value, u32 timeout, u32 flags) if (j != AHASH_MAX(h) + 1) { data = ahash_tdata(n, j); #ifdef IP_SET_HASH_WITH_NETS - del_cidr(h, data->cidr, HOST_MASK); - add_cidr(h, d->cidr, HOST_MASK); + del_cidr(h, CIDR(data->cidr), HOST_MASK); + add_cidr(h, CIDR(d->cidr), HOST_MASK); #endif type_pf_data_copy(data, d); type_pf_data_timeout_set(data, timeout); +#ifdef IP_SET_HASH_WITH_NETS + type_pf_data_flags(data, cadt_flags); +#endif goto out; } TUNE_AHASH_MAX(h, multi); - ret = type_pf_elem_tadd(n, d, AHASH_MAX(h), timeout); + ret = type_pf_elem_tadd(n, d, AHASH_MAX(h), cadt_flags, timeout); if (ret != 0) { if (ret == -EAGAIN) type_pf_data_next(h, d); @@ -896,7 +933,7 @@ type_pf_tadd(struct ip_set *set, void *value, u32 timeout, u32 flags) } #ifdef IP_SET_HASH_WITH_NETS - add_cidr(h, d->cidr, HOST_MASK); + add_cidr(h, CIDR(d->cidr), HOST_MASK); #endif h->elements++; out: @@ -930,7 +967,7 @@ type_pf_tdel(struct ip_set *set, void *value, u32 timeout, u32 flags) n->pos--; h->elements--; #ifdef IP_SET_HASH_WITH_NETS - del_cidr(h, d->cidr, HOST_MASK); + del_cidr(h, CIDR(d->cidr), HOST_MASK); #endif if (n->pos + AHASH_INIT_SIZE < n->size) { void *tmp = kzalloc((n->size - AHASH_INIT_SIZE) @@ -968,8 +1005,9 @@ type_pf_ttest_cidrs(struct ip_set *set, struct type_pf_elem *d, u32 timeout) n = hbucket(t, key); for (i = 0; i < n->pos; i++) { data = ahash_tdata(n, i); - if (type_pf_data_equal(data, d, &multi)) - return !type_pf_data_expired(data); + if (type_pf_data_equal(data, d, &multi) && + !type_pf_data_expired(data)) + return type_pf_data_match(data); } } return 0; @@ -987,15 +1025,16 @@ type_pf_ttest(struct ip_set *set, void *value, u32 timeout, u32 flags) u32 key, multi = 0; #ifdef IP_SET_HASH_WITH_NETS - if (d->cidr == SET_HOST_MASK(set->family)) + if (CIDR(d->cidr) == SET_HOST_MASK(set->family)) return type_pf_ttest_cidrs(set, d, timeout); #endif key = HKEY(d, h->initval, t->htable_bits); n = hbucket(t, key); for (i = 0; i < n->pos; i++) { data = ahash_tdata(n, i); - if (type_pf_data_equal(data, d, &multi)) - return !type_pf_data_expired(data); + if (type_pf_data_equal(data, d, &multi) && + !type_pf_data_expired(data)) + return type_pf_data_match(data); } return 0; } @@ -1108,14 +1147,17 @@ type_pf_gc_init(struct ip_set *set) #undef type_pf_data_isnull #undef type_pf_data_copy #undef type_pf_data_zero_out +#undef type_pf_data_netmask #undef type_pf_data_list #undef type_pf_data_tlist +#undef type_pf_data_next +#undef type_pf_data_flags +#undef type_pf_data_match #undef type_pf_elem #undef type_pf_telem #undef type_pf_data_timeout #undef type_pf_data_expired -#undef type_pf_data_netmask #undef type_pf_data_timeout_set #undef type_pf_elem_add @@ -1125,6 +1167,7 @@ type_pf_gc_init(struct ip_set *set) #undef type_pf_test #undef type_pf_elem_tadd +#undef type_pf_del_telem #undef type_pf_expire #undef type_pf_tadd #undef type_pf_tdel -- cgit From 7f81c951d961bef0bf9aa55449654302b9da8185 Mon Sep 17 00:00:00 2001 From: Jozsef Kadlecsik Date: Fri, 13 Jan 2012 22:55:54 +0100 Subject: netfilter: ipset: hash:net,iface timeout bug fixed Timed out entries were still matched till the garbage collector purged them out. The fix is verified in the testsuite. Signed-off-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter/ipset/ip_set_ahash.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/netfilter/ipset/ip_set_ahash.h b/include/linux/netfilter/ipset/ip_set_ahash.h index 0e5c3cf7618a..05a5d72680be 100644 --- a/include/linux/netfilter/ipset/ip_set_ahash.h +++ b/include/linux/netfilter/ipset/ip_set_ahash.h @@ -1005,9 +1005,17 @@ type_pf_ttest_cidrs(struct ip_set *set, struct type_pf_elem *d, u32 timeout) n = hbucket(t, key); for (i = 0; i < n->pos; i++) { data = ahash_tdata(n, i); +#ifdef IP_SET_HASH_WITH_MULTI + if (type_pf_data_equal(data, d, &multi)) { + if (!type_pf_data_expired(data)) + return type_pf_data_match(data); + multi = 0; + } +#else if (type_pf_data_equal(data, d, &multi) && !type_pf_data_expired(data)) return type_pf_data_match(data); +#endif } } return 0; -- cgit From b8c5e52c13edc99ce192d78c8a7fe2fd626ac643 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Sun, 5 Feb 2012 03:21:12 +0100 Subject: netfilter: ctnetlink: allow to set expectation class This patch allows you to set the expectation class. Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter/nfnetlink_conntrack.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/netfilter/nfnetlink_conntrack.h b/include/linux/netfilter/nfnetlink_conntrack.h index d498a4426ebf..557a0cfb1433 100644 --- a/include/linux/netfilter/nfnetlink_conntrack.h +++ b/include/linux/netfilter/nfnetlink_conntrack.h @@ -173,6 +173,7 @@ enum ctattr_expect { CTA_EXPECT_HELP_NAME, CTA_EXPECT_ZONE, CTA_EXPECT_FLAGS, + CTA_EXPECT_CLASS, __CTA_EXPECT_MAX }; #define CTA_EXPECT_MAX (__CTA_EXPECT_MAX - 1) -- cgit From 076a0ca02644657b13e4af363f487ced2942e9cb Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Sun, 5 Feb 2012 03:41:52 +0100 Subject: netfilter: ctnetlink: add NAT support for expectations This patch adds the missing bits to create expectations that are created in NAT setups. --- include/linux/netfilter/nfnetlink_conntrack.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/linux') diff --git a/include/linux/netfilter/nfnetlink_conntrack.h b/include/linux/netfilter/nfnetlink_conntrack.h index 557a0cfb1433..a2f1f483ecc9 100644 --- a/include/linux/netfilter/nfnetlink_conntrack.h +++ b/include/linux/netfilter/nfnetlink_conntrack.h @@ -174,10 +174,19 @@ enum ctattr_expect { CTA_EXPECT_ZONE, CTA_EXPECT_FLAGS, CTA_EXPECT_CLASS, + CTA_EXPECT_NAT, __CTA_EXPECT_MAX }; #define CTA_EXPECT_MAX (__CTA_EXPECT_MAX - 1) +enum ctattr_expect_nat { + CTA_EXPECT_NAT_UNSPEC, + CTA_EXPECT_NAT_DIR, + CTA_EXPECT_NAT_TUPLE, + __CTA_EXPECT_NAT_MAX +}; +#define CTA_EXPECT_NAT_MAX (__CTA_EXPECT_NAT_MAX - 1) + enum ctattr_help { CTA_HELP_UNSPEC, CTA_HELP_NAME, -- cgit From 544d5c7d9f4d1ec4f170bc5bcc522012cb7704bc Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Sun, 5 Feb 2012 03:44:51 +0100 Subject: netfilter: ctnetlink: allow to set expectfn for expectations This patch allows you to set expectfn which is specifically used by the NAT side of most of the existing conntrack helpers. I have added a symbol map that uses a string as key to look up for the function that is attached to the expectation object. This is the best solution I came out with to solve this issue. Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter/nfnetlink_conntrack.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/netfilter/nfnetlink_conntrack.h b/include/linux/netfilter/nfnetlink_conntrack.h index a2f1f483ecc9..e58e4b93c108 100644 --- a/include/linux/netfilter/nfnetlink_conntrack.h +++ b/include/linux/netfilter/nfnetlink_conntrack.h @@ -175,6 +175,7 @@ enum ctattr_expect { CTA_EXPECT_FLAGS, CTA_EXPECT_CLASS, CTA_EXPECT_NAT, + CTA_EXPECT_FN, __CTA_EXPECT_MAX }; #define CTA_EXPECT_MAX (__CTA_EXPECT_MAX - 1) -- cgit From 6939c33a757bd006c5e0b8b5fd429fc587a4d0f4 Mon Sep 17 00:00:00 2001 From: Richard Weinberger Date: Fri, 10 Feb 2012 23:10:52 +0100 Subject: netfilter: merge ipt_LOG and ip6_LOG into xt_LOG ipt_LOG and ip6_LOG have a lot of common code, merge them to reduce duplicate code. Signed-off-by: Richard Weinberger Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter/Kbuild | 1 + include/linux/netfilter/xt_LOG.h | 19 +++++++++++++++++++ include/linux/netfilter_ipv4/ipt_LOG.h | 2 ++ include/linux/netfilter_ipv6/ip6t_LOG.h | 2 ++ 4 files changed, 24 insertions(+) create mode 100644 include/linux/netfilter/xt_LOG.h (limited to 'include/linux') diff --git a/include/linux/netfilter/Kbuild b/include/linux/netfilter/Kbuild index e144f54185c0..aaa72aaa21de 100644 --- a/include/linux/netfilter/Kbuild +++ b/include/linux/netfilter/Kbuild @@ -22,6 +22,7 @@ header-y += xt_CT.h header-y += xt_DSCP.h header-y += xt_IDLETIMER.h header-y += xt_LED.h +header-y += xt_LOG.h header-y += xt_MARK.h header-y += xt_nfacct.h header-y += xt_NFLOG.h diff --git a/include/linux/netfilter/xt_LOG.h b/include/linux/netfilter/xt_LOG.h new file mode 100644 index 000000000000..cac079095305 --- /dev/null +++ b/include/linux/netfilter/xt_LOG.h @@ -0,0 +1,19 @@ +#ifndef _XT_LOG_H +#define _XT_LOG_H + +/* make sure not to change this without changing nf_log.h:NF_LOG_* (!) */ +#define XT_LOG_TCPSEQ 0x01 /* Log TCP sequence numbers */ +#define XT_LOG_TCPOPT 0x02 /* Log TCP options */ +#define XT_LOG_IPOPT 0x04 /* Log IP options */ +#define XT_LOG_UID 0x08 /* Log UID owning local socket */ +#define XT_LOG_NFLOG 0x10 /* Unsupported, don't reuse */ +#define XT_LOG_MACDECODE 0x20 /* Decode MAC header */ +#define XT_LOG_MASK 0x2f + +struct xt_log_info { + unsigned char level; + unsigned char logflags; + char prefix[30]; +}; + +#endif /* _XT_LOG_H */ diff --git a/include/linux/netfilter_ipv4/ipt_LOG.h b/include/linux/netfilter_ipv4/ipt_LOG.h index dcdbadf9fd4a..5d8152077d71 100644 --- a/include/linux/netfilter_ipv4/ipt_LOG.h +++ b/include/linux/netfilter_ipv4/ipt_LOG.h @@ -1,6 +1,8 @@ #ifndef _IPT_LOG_H #define _IPT_LOG_H +#warning "Please update iptables, this file will be removed soon!" + /* make sure not to change this without changing netfilter.h:NF_LOG_* (!) */ #define IPT_LOG_TCPSEQ 0x01 /* Log TCP sequence numbers */ #define IPT_LOG_TCPOPT 0x02 /* Log TCP options */ diff --git a/include/linux/netfilter_ipv6/ip6t_LOG.h b/include/linux/netfilter_ipv6/ip6t_LOG.h index 9dd5579e02ec..3dd0bc4e0735 100644 --- a/include/linux/netfilter_ipv6/ip6t_LOG.h +++ b/include/linux/netfilter_ipv6/ip6t_LOG.h @@ -1,6 +1,8 @@ #ifndef _IP6T_LOG_H #define _IP6T_LOG_H +#warning "Please update iptables, this file will be removed soon!" + /* make sure not to change this without changing netfilter.h:NF_LOG_* (!) */ #define IP6T_LOG_TCPSEQ 0x01 /* Log TCP sequence numbers */ #define IP6T_LOG_TCPOPT 0x02 /* Log TCP options */ -- cgit From 5f1f815103eb13823d34875807c1710b8e2b0f09 Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Wed, 29 Feb 2012 04:05:41 +0100 Subject: netfilter: remove ipt_SAME.h and ipt_realm.h These two headers are not required anymore, they have been replaced by xt_SAME.h and xt_realm.h. Florian Westphal pointed out this. Cc: "David S. Miller" Cc: Florian Westphal Signed-off-by: WANG Cong --- include/linux/netfilter_ipv4/Kbuild | 2 -- include/linux/netfilter_ipv4/ipt_SAME.h | 20 -------------------- include/linux/netfilter_ipv4/ipt_realm.h | 7 ------- 3 files changed, 29 deletions(-) delete mode 100644 include/linux/netfilter_ipv4/ipt_SAME.h delete mode 100644 include/linux/netfilter_ipv4/ipt_realm.h (limited to 'include/linux') diff --git a/include/linux/netfilter_ipv4/Kbuild b/include/linux/netfilter_ipv4/Kbuild index f9930c87fff3..31f8bec95650 100644 --- a/include/linux/netfilter_ipv4/Kbuild +++ b/include/linux/netfilter_ipv4/Kbuild @@ -4,11 +4,9 @@ header-y += ipt_CLUSTERIP.h header-y += ipt_ECN.h header-y += ipt_LOG.h header-y += ipt_REJECT.h -header-y += ipt_SAME.h header-y += ipt_TTL.h header-y += ipt_ULOG.h header-y += ipt_addrtype.h header-y += ipt_ah.h header-y += ipt_ecn.h -header-y += ipt_realm.h header-y += ipt_ttl.h diff --git a/include/linux/netfilter_ipv4/ipt_SAME.h b/include/linux/netfilter_ipv4/ipt_SAME.h deleted file mode 100644 index 5bca78267afd..000000000000 --- a/include/linux/netfilter_ipv4/ipt_SAME.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef _IPT_SAME_H -#define _IPT_SAME_H - -#include - -#define IPT_SAME_MAX_RANGE 10 - -#define IPT_SAME_NODST 0x01 - -struct ipt_same_info { - unsigned char info; - __u32 rangesize; - __u32 ipnum; - __u32 *iparray; - - /* hangs off end. */ - struct nf_nat_range range[IPT_SAME_MAX_RANGE]; -}; - -#endif /*_IPT_SAME_H*/ diff --git a/include/linux/netfilter_ipv4/ipt_realm.h b/include/linux/netfilter_ipv4/ipt_realm.h deleted file mode 100644 index b3996eaa0188..000000000000 --- a/include/linux/netfilter_ipv4/ipt_realm.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _IPT_REALM_H -#define _IPT_REALM_H - -#include -#define ipt_realm_info xt_realm_info - -#endif /* _IPT_REALM_H */ -- cgit From 33ee44643f10638f0ce6a96d11e30d1fbe877024 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Tue, 28 Feb 2012 16:56:31 +0100 Subject: netfilter: nf_ct_tcp: move retransmission and unacknowledged timeout to array This patch moves the retransmission and unacknowledged timeouts to the tcp_timeouts array. This change is required by follow-up patches. Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter/nf_conntrack_tcp.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/netfilter/nf_conntrack_tcp.h b/include/linux/netfilter/nf_conntrack_tcp.h index 6e135f97e59a..e59868ae12d4 100644 --- a/include/linux/netfilter/nf_conntrack_tcp.h +++ b/include/linux/netfilter/nf_conntrack_tcp.h @@ -18,7 +18,10 @@ enum tcp_conntrack { TCP_CONNTRACK_LISTEN, /* obsolete */ #define TCP_CONNTRACK_SYN_SENT2 TCP_CONNTRACK_LISTEN TCP_CONNTRACK_MAX, - TCP_CONNTRACK_IGNORE + TCP_CONNTRACK_IGNORE, + TCP_CONNTRACK_RETRANS, + TCP_CONNTRACK_UNACK, + TCP_CONNTRACK_TIMEOUT_MAX }; /* Window scaling is advertised by the sender */ -- cgit From 50978462300f74dc48aea4a38471cb69bdf741a5 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Tue, 28 Feb 2012 19:13:48 +0100 Subject: netfilter: add cttimeout infrastructure for fine timeout tuning This patch adds the infrastructure to add fine timeout tuning over nfnetlink. Now you can use the NFNL_SUBSYS_CTNETLINK_TIMEOUT subsystem to create/delete/dump timeout objects that contain some specific timeout policy for one flow. The follow up patches will allow you attach timeout policy object to conntrack via the CT target and the conntrack extension infrastructure. Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter/Kbuild | 1 + include/linux/netfilter/nfnetlink.h | 3 +- include/linux/netfilter/nfnetlink_cttimeout.h | 114 ++++++++++++++++++++++++++ 3 files changed, 117 insertions(+), 1 deletion(-) create mode 100644 include/linux/netfilter/nfnetlink_cttimeout.h (limited to 'include/linux') diff --git a/include/linux/netfilter/Kbuild b/include/linux/netfilter/Kbuild index aaa72aaa21de..1697036336b6 100644 --- a/include/linux/netfilter/Kbuild +++ b/include/linux/netfilter/Kbuild @@ -10,6 +10,7 @@ header-y += nfnetlink.h header-y += nfnetlink_acct.h header-y += nfnetlink_compat.h header-y += nfnetlink_conntrack.h +header-y += nfnetlink_cttimeout.h header-y += nfnetlink_log.h header-y += nfnetlink_queue.h header-y += x_tables.h diff --git a/include/linux/netfilter/nfnetlink.h b/include/linux/netfilter/nfnetlink.h index b64454c2f79f..6fd1f0d07e64 100644 --- a/include/linux/netfilter/nfnetlink.h +++ b/include/linux/netfilter/nfnetlink.h @@ -49,7 +49,8 @@ struct nfgenmsg { #define NFNL_SUBSYS_OSF 5 #define NFNL_SUBSYS_IPSET 6 #define NFNL_SUBSYS_ACCT 7 -#define NFNL_SUBSYS_COUNT 8 +#define NFNL_SUBSYS_CTNETLINK_TIMEOUT 8 +#define NFNL_SUBSYS_COUNT 9 #ifdef __KERNEL__ diff --git a/include/linux/netfilter/nfnetlink_cttimeout.h b/include/linux/netfilter/nfnetlink_cttimeout.h new file mode 100644 index 000000000000..a2810a7c5e30 --- /dev/null +++ b/include/linux/netfilter/nfnetlink_cttimeout.h @@ -0,0 +1,114 @@ +#ifndef _CTTIMEOUT_NETLINK_H +#define _CTTIMEOUT_NETLINK_H +#include + +enum ctnl_timeout_msg_types { + IPCTNL_MSG_TIMEOUT_NEW, + IPCTNL_MSG_TIMEOUT_GET, + IPCTNL_MSG_TIMEOUT_DELETE, + + IPCTNL_MSG_TIMEOUT_MAX +}; + +enum ctattr_timeout { + CTA_TIMEOUT_UNSPEC, + CTA_TIMEOUT_NAME, + CTA_TIMEOUT_L3PROTO, + CTA_TIMEOUT_L4PROTO, + CTA_TIMEOUT_DATA, + CTA_TIMEOUT_USE, + __CTA_TIMEOUT_MAX +}; +#define CTA_TIMEOUT_MAX (__CTA_TIMEOUT_MAX - 1) + +enum ctattr_timeout_generic { + CTA_TIMEOUT_GENERIC_UNSPEC, + CTA_TIMEOUT_GENERIC_TIMEOUT, + __CTA_TIMEOUT_GENERIC_MAX +}; +#define CTA_TIMEOUT_GENERIC_MAX (__CTA_TIMEOUT_GENERIC_MAX - 1) + +enum ctattr_timeout_tcp { + CTA_TIMEOUT_TCP_UNSPEC, + CTA_TIMEOUT_TCP_SYN_SENT, + CTA_TIMEOUT_TCP_SYN_RECV, + CTA_TIMEOUT_TCP_ESTABLISHED, + CTA_TIMEOUT_TCP_FIN_WAIT, + CTA_TIMEOUT_TCP_CLOSE_WAIT, + CTA_TIMEOUT_TCP_LAST_ACK, + CTA_TIMEOUT_TCP_TIME_WAIT, + CTA_TIMEOUT_TCP_CLOSE, + CTA_TIMEOUT_TCP_SYN_SENT2, + CTA_TIMEOUT_TCP_RETRANS, + CTA_TIMEOUT_TCP_UNACK, + __CTA_TIMEOUT_TCP_MAX +}; +#define CTA_TIMEOUT_TCP_MAX (__CTA_TIMEOUT_TCP_MAX - 1) + +enum ctattr_timeout_udp { + CTA_TIMEOUT_UDP_UNSPEC, + CTA_TIMEOUT_UDP_UNREPLIED, + CTA_TIMEOUT_UDP_REPLIED, + __CTA_TIMEOUT_UDP_MAX +}; +#define CTA_TIMEOUT_UDP_MAX (__CTA_TIMEOUT_UDP_MAX - 1) + +enum ctattr_timeout_udplite { + CTA_TIMEOUT_UDPLITE_UNSPEC, + CTA_TIMEOUT_UDPLITE_UNREPLIED, + CTA_TIMEOUT_UDPLITE_REPLIED, + __CTA_TIMEOUT_UDPLITE_MAX +}; +#define CTA_TIMEOUT_UDPLITE_MAX (__CTA_TIMEOUT_UDPLITE_MAX - 1) + +enum ctattr_timeout_icmp { + CTA_TIMEOUT_ICMP_UNSPEC, + CTA_TIMEOUT_ICMP_TIMEOUT, + __CTA_TIMEOUT_ICMP_MAX +}; +#define CTA_TIMEOUT_ICMP_MAX (__CTA_TIMEOUT_ICMP_MAX - 1) + +enum ctattr_timeout_dccp { + CTA_TIMEOUT_DCCP_UNSPEC, + CTA_TIMEOUT_DCCP_REQUEST, + CTA_TIMEOUT_DCCP_RESPOND, + CTA_TIMEOUT_DCCP_PARTOPEN, + CTA_TIMEOUT_DCCP_OPEN, + CTA_TIMEOUT_DCCP_CLOSEREQ, + CTA_TIMEOUT_DCCP_CLOSING, + CTA_TIMEOUT_DCCP_TIMEWAIT, + __CTA_TIMEOUT_DCCP_MAX +}; +#define CTA_TIMEOUT_DCCP_MAX (__CTA_TIMEOUT_DCCP_MAX - 1) + +enum ctattr_timeout_sctp { + CTA_TIMEOUT_SCTP_UNSPEC, + CTA_TIMEOUT_SCTP_CLOSED, + CTA_TIMEOUT_SCTP_COOKIE_WAIT, + CTA_TIMEOUT_SCTP_COOKIE_ECHOED, + CTA_TIMEOUT_SCTP_ESTABLISHED, + CTA_TIMEOUT_SCTP_SHUTDOWN_SENT, + CTA_TIMEOUT_SCTP_SHUTDOWN_RECD, + CTA_TIMEOUT_SCTP_SHUTDOWN_ACK_SENT, + __CTA_TIMEOUT_SCTP_MAX +}; +#define CTA_TIMEOUT_SCTP_MAX (__CTA_TIMEOUT_SCTP_MAX - 1) + +enum ctattr_timeout_icmpv6 { + CTA_TIMEOUT_ICMPV6_UNSPEC, + CTA_TIMEOUT_ICMPV6_TIMEOUT, + __CTA_TIMEOUT_ICMPV6_MAX +}; +#define CTA_TIMEOUT_ICMPV6_MAX (__CTA_TIMEOUT_ICMPV6_MAX - 1) + +enum ctattr_timeout_gre { + CTA_TIMEOUT_GRE_UNSPEC, + CTA_TIMEOUT_GRE_UNREPLIED, + CTA_TIMEOUT_GRE_REPLIED, + __CTA_TIMEOUT_GRE_MAX +}; +#define CTA_TIMEOUT_GRE_MAX (__CTA_TIMEOUT_GRE_MAX - 1) + +#define CTNL_TIMEOUT_NAME_MAX 32 + +#endif -- cgit From 24de58f465165298aaa8f286b2592f0163706cfe Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Wed, 29 Feb 2012 02:19:19 +0100 Subject: netfilter: xt_CT: allow to attach timeout policy + glue code This patch allows you to attach the timeout policy via the CT target, it adds a new revision of the target to ensure backward compatibility. Moreover, it also contains the glue code to stick the timeout object defined via nfnetlink_cttimeout to the given flow. Example usage (it requires installing the nfct tool and libnetfilter_cttimeout): 1) create the timeout policy: nfct timeout add tcp-policy0 inet tcp \ established 1000 close 10 time_wait 10 last_ack 10 2) attach the timeout policy to the packet: iptables -I PREROUTING -t raw -p tcp -j CT --timeout tcp-policy0 You have to install the following user-space software: a) libnetfilter_cttimeout: git://git.netfilter.org/libnetfilter_cttimeout b) nfct: git://git.netfilter.org/nfct You also have to get iptables with -j CT --timeout support. Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter/xt_CT.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include/linux') diff --git a/include/linux/netfilter/xt_CT.h b/include/linux/netfilter/xt_CT.h index b56e76811c04..a064b8af360c 100644 --- a/include/linux/netfilter/xt_CT.h +++ b/include/linux/netfilter/xt_CT.h @@ -16,4 +16,16 @@ struct xt_ct_target_info { struct nf_conn *ct __attribute__((aligned(8))); }; +struct xt_ct_target_info_v1 { + __u16 flags; + __u16 zone; + __u32 ct_events; + __u32 exp_events; + char helper[16]; + char timeout[32]; + + /* Used internally by the kernel */ + struct nf_conn *ct __attribute__((aligned(8))); +}; + #endif /* _XT_CT_H */ -- cgit From 079c9534a96da9a85a2a2f9715851050fbfbf749 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 28 Feb 2012 14:49:23 +0000 Subject: vt:tackle kbd_table Keyboard struct lifetime is easy, but the locking is not and is completely ignored by the existing code. Tackle this one head on - Make the kbd_table private so we can run down all direct users - Hoick the relevant ioctl handlers into the keyboard layer - Lock them with the keyboard lock so they don't change mid keypress - Add helpers for things like console stop/start so we isolate the poking around properly - Tweak the braille console so it still builds There are a couple of FIXME locking cases left for ioctls that are so hideous they should be addressed in a later patch. After this patch the kbd_table is private and all the keyboard jiggery pokery is in one place. This update fixes speakup and also a memory leak in the original. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- include/linux/kbd_kern.h | 7 +------ include/linux/keyboard.h | 2 -- include/linux/vt_kern.h | 23 +++++++++++++++++++++++ 3 files changed, 24 insertions(+), 8 deletions(-) (limited to 'include/linux') diff --git a/include/linux/kbd_kern.h b/include/linux/kbd_kern.h index ec2d17bc1f1e..daf4a3a40ee0 100644 --- a/include/linux/kbd_kern.h +++ b/include/linux/kbd_kern.h @@ -7,8 +7,6 @@ extern struct tasklet_struct keyboard_tasklet; -extern int shift_state; - extern char *func_table[MAX_NR_FUNC]; extern char func_buf[]; extern char *funcbufptr; @@ -65,8 +63,6 @@ struct kbd_struct { #define VC_META 4 /* 0 - meta, 1 - meta=prefix with ESC */ }; -extern struct kbd_struct kbd_table[]; - extern int kbd_init(void); extern unsigned char getledstate(void); @@ -79,6 +75,7 @@ extern void (*kbd_ledfunc)(unsigned int led); extern int set_console(int nr); extern void schedule_console_callback(void); +/* FIXME: review locking for vt.c callers */ static inline void set_leds(void) { tasklet_schedule(&keyboard_tasklet); @@ -142,8 +139,6 @@ static inline void chg_vc_kbd_led(struct kbd_struct * kbd, int flag) struct console; -int getkeycode(unsigned int scancode); -int setkeycode(unsigned int scancode, unsigned int keycode); void compute_shiftstate(void); /* defkeymap.c */ diff --git a/include/linux/keyboard.h b/include/linux/keyboard.h index 33a63f62d57f..86e5214ae735 100644 --- a/include/linux/keyboard.h +++ b/include/linux/keyboard.h @@ -24,8 +24,6 @@ #ifdef __KERNEL__ struct notifier_block; -extern const int NR_TYPES; -extern const int max_vals[]; extern unsigned short *key_maps[MAX_NR_KEYMAPS]; extern unsigned short plain_map[NR_KEYS]; diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h index 5d8726ad5729..e33d77f15bda 100644 --- a/include/linux/vt_kern.h +++ b/include/linux/vt_kern.h @@ -169,5 +169,28 @@ extern void hide_boot_cursor(bool hide); /* keyboard provided interfaces */ extern int vt_do_diacrit(unsigned int cmd, void __user *up, int eperm); +extern int vt_do_kdskbmode(int console, unsigned int arg); +extern int vt_do_kdskbmeta(int console, unsigned int arg); +extern int vt_do_kbkeycode_ioctl(int cmd, struct kbkeycode __user *user_kbkc, + int perm); +extern int vt_do_kdsk_ioctl(int cmd, struct kbentry __user *user_kbe, + int perm, int console); +extern int vt_do_kdgkb_ioctl(int cmd, struct kbsentry __user *user_kdgkb, + int perm); +extern int vt_do_kdskled(int console, int cmd, unsigned long arg, int perm); +extern int vt_do_kdgkbmode(int console); +extern int vt_do_kdgkbmeta(int console); +extern void vt_reset_unicode(int console); +extern int vt_get_shift_state(void); +extern void vt_reset_keyboard(int console); +extern int vt_get_leds(int console, int flag); +extern int vt_get_kbd_mode_bit(int console, int bit); +extern void vt_set_kbd_mode_bit(int console, int bit); +extern void vt_clr_kbd_mode_bit(int console, int bit); +extern void vt_set_led_state(int console, int leds); +extern void vt_set_led_state(int console, int leds); +extern void vt_kbd_con_start(int console); +extern void vt_kbd_con_stop(int console); + #endif /* _VT_KERN_H */ -- cgit From 1a54a76d5171f3ffd89eb69f6f38d535724e3d05 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 5 Mar 2012 14:51:50 +0100 Subject: TTY: let alloc_tty_driver deduce the owner automatically Like the rest of the kernel, make a stub from alloc_tty_driver which calls __alloc_tty_driver with proper owner. This will save us one more assignment on the driver side. Also this fixes some drivers which didn't set the owner. This allowed user to remove the module from the system even though a tty from the driver is still open. Signed-off-by: Jiri Slaby Signed-off-by: Greg Kroah-Hartman --- include/linux/tty_driver.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h index 5cf685086dd3..6e65493a5e6c 100644 --- a/include/linux/tty_driver.h +++ b/include/linux/tty_driver.h @@ -234,6 +234,7 @@ * if provided (otherwise EINVAL will be returned). */ +#include #include #include #include @@ -324,7 +325,7 @@ struct tty_driver { extern struct list_head tty_drivers; -extern struct tty_driver *alloc_tty_driver(int lines); +extern struct tty_driver *__alloc_tty_driver(int lines, struct module *owner); extern void put_tty_driver(struct tty_driver *driver); extern void tty_set_operations(struct tty_driver *driver, const struct tty_operations *op); @@ -332,6 +333,8 @@ extern struct tty_driver *tty_find_polling_driver(char *name, int *line); extern void tty_driver_kref_put(struct tty_driver *driver); +#define alloc_tty_driver(lines) __alloc_tty_driver(lines, THIS_MODULE) + static inline struct tty_driver *tty_driver_kref_get(struct tty_driver *d) { kref_get(&d->kref); -- cgit From 87cab16beb882d3f9e61a2c0184fa7cf76de1f90 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 5 Mar 2012 14:51:51 +0100 Subject: TTY: remove minor_num from tty_driver It was added back in 2004 and never used for anything real. Remove the only assignment in the tree as well. Signed-off-by: Jiri Slaby Signed-off-by: Greg Kroah-Hartman --- include/linux/tty_driver.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h index 6e65493a5e6c..e064f1704e20 100644 --- a/include/linux/tty_driver.h +++ b/include/linux/tty_driver.h @@ -299,7 +299,6 @@ struct tty_driver { int name_base; /* offset of printed name */ int major; /* major device number */ int minor_start; /* start of minor device number */ - int minor_num; /* number of *possible* devices */ int num; /* number of devices allocated */ short type; /* type of tty driver */ short subtype; /* subtype of tty driver */ -- cgit From 91cedcde1e5feede6c1e4c2086ec4f3c84c56d4f Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 5 Mar 2012 14:51:55 +0100 Subject: TTY: serial, simplify ASYNC_USR_MASK By using ASYNC_SPD_MASK instead of the single speed bits. Signed-off-by: Jiri Slaby Signed-off-by: Greg Kroah-Hartman --- include/linux/serial.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/serial.h b/include/linux/serial.h index 3d86517fe7d5..441980ecc4e5 100644 --- a/include/linux/serial.h +++ b/include/linux/serial.h @@ -152,8 +152,8 @@ struct serial_uart_config { #define ASYNC_AUTOPROBE (1U << ASYNCB_AUTOPROBE) #define ASYNC_FLAGS ((1U << (ASYNCB_LAST_USER + 1)) - 1) -#define ASYNC_USR_MASK (ASYNC_SPD_HI|ASYNC_SPD_VHI| \ - ASYNC_CALLOUT_NOHUP|ASYNC_SPD_SHI|ASYNC_LOW_LATENCY) +#define ASYNC_USR_MASK (ASYNC_SPD_MASK|ASYNC_CALLOUT_NOHUP| \ + ASYNC_LOW_LATENCY) #define ASYNC_SPD_CUST (ASYNC_SPD_HI|ASYNC_SPD_VHI) #define ASYNC_SPD_WARP (ASYNC_SPD_HI|ASYNC_SPD_SHI) #define ASYNC_SPD_MASK (ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI) -- cgit From 26b23209c0ea5503824df60b8f218fb04b80cad0 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 5 Mar 2012 14:51:56 +0100 Subject: TTY: tty_driver, document tty->ops->shutdown limitation Note that tty->ops->shutdown is called from whatever context the user drops the last tty reference from. E.g. if one takes a reference in an ISR, tty close happens on other CPU and the final tty put is from the ISR, tty->ops->shutdown will be called from that hard irq context. We would have a problem in vt if we start using tty refcounting from other contexts than user there. It is because vt's shutdown uses mutexes. This is yet to be fixed. Signed-off-by: Jiri Slaby Reported-by: Al Viro Signed-off-by: Greg Kroah-Hartman --- include/linux/tty_driver.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h index e064f1704e20..6e6dbb7447b6 100644 --- a/include/linux/tty_driver.h +++ b/include/linux/tty_driver.h @@ -50,6 +50,8 @@ * Note that tty_shutdown() is not called if ops->shutdown is defined. * This means one is responsible to take care of calling ops->remove (e.g. * via tty_driver_remove_tty) and releasing tty->termios. + * Note that this hook may be called from *all* the contexts where one + * uses tty refcounting (e.g. tty_port_tty_get). * * * void (*cleanup)(struct tty_struct * tty); -- cgit From 44a1bfd95d0a6c0096e79a883197596e1ce83cc3 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 5 Mar 2012 14:52:00 +0100 Subject: TTY: serialP, remove DECLARE_WAITQUEUE check The macro is always defined now. This was there only for historical reasons. Signed-off-by: Jiri Slaby Signed-off-by: Greg Kroah-Hartman --- include/linux/serialP.h | 6 ------ 1 file changed, 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/serialP.h b/include/linux/serialP.h index e811a615f696..ec27b34bbbd6 100644 --- a/include/linux/serialP.h +++ b/include/linux/serialP.h @@ -79,15 +79,9 @@ struct async_struct { int io_type; struct work_struct work; struct tasklet_struct tlet; -#ifdef DECLARE_WAITQUEUE wait_queue_head_t open_wait; wait_queue_head_t close_wait; wait_queue_head_t delta_msr_wait; -#else - struct wait_queue *open_wait; - struct wait_queue *close_wait; - struct wait_queue *delta_msr_wait; -#endif struct async_struct *next_port; /* For the linked list */ struct async_struct *prev_port; }; -- cgit From 9c8efecc91c02056340ae19612315f3225e6dbe2 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 5 Mar 2012 14:52:12 +0100 Subject: TTY: serialP, remove unused material First, remove unused macro and rs_multiport_struct structure. Nobody uses them at all. Further, the 2 drivers (they are below) which use the rest of structures from serialP.h (async_struct and serial_state) do not use all the members. Remove the members: * which are unused or * which are only initialized and never used for something real. Everybody should avoid the structures with a looong distance. Finally, remove the ALPHA kludge MCR quirks. They are 1:1 copy from 8250.h. No need to redefine them here. The 2 promised users of the structures: arch/ia64/hp/sim/simserial.c drivers/tty/amiserial.c Signed-off-by: Jiri Slaby Cc: Geert Uytterhoeven Cc: Tony Luck Cc: Fenghua Yu Signed-off-by: Greg Kroah-Hartman --- include/linux/serialP.h | 59 ------------------------------------------------- 1 file changed, 59 deletions(-) (limited to 'include/linux') diff --git a/include/linux/serialP.h b/include/linux/serialP.h index ec27b34bbbd6..c1acdb2c8584 100644 --- a/include/linux/serialP.h +++ b/include/linux/serialP.h @@ -26,32 +26,23 @@ #include struct serial_state { - int magic; int baud_base; unsigned long port; int irq; int flags; - int hub6; int type; int line; - int revision; /* Chip revision (950) */ int xmit_fifo_size; int custom_divisor; int count; - u8 *iomem_base; - u16 iomem_reg_shift; unsigned short close_delay; unsigned short closing_wait; /* time to wait before closing */ struct async_icount icount; - int io_type; struct async_struct *info; - struct pci_dev *dev; }; struct async_struct { - int magic; unsigned long port; - int hub6; int flags; int xmit_fifo_size; struct serial_state *state; @@ -63,21 +54,12 @@ struct async_struct { int x_char; /* xon/xoff character */ int close_delay; unsigned short closing_wait; - unsigned short closing_wait2; /* obsolete */ int IER; /* Interrupt Enable Register */ int MCR; /* Modem control register */ - int LCR; /* Line control register */ - int ACR; /* 16950 Additional Control Reg. */ unsigned long event; - unsigned long last_active; int line; int blocked_open; /* # of blocked opens */ struct circ_buf xmit; - spinlock_t xmit_lock; - u8 *iomem_base; - u16 iomem_reg_shift; - int io_type; - struct work_struct work; struct tasklet_struct tlet; wait_queue_head_t open_wait; wait_queue_head_t close_wait; @@ -86,51 +68,10 @@ struct async_struct { struct async_struct *prev_port; }; -#define CONFIGURED_SERIAL_PORT(info) ((info)->port || ((info)->iomem_base)) - -#define SERIAL_MAGIC 0x5301 -#define SSTATE_MAGIC 0x5302 - /* * Events are used to schedule things to happen at timer-interrupt * time, instead of at rs interrupt time. */ #define RS_EVENT_WRITE_WAKEUP 0 -/* - * Multiport serial configuration structure --- internal structure - */ -struct rs_multiport_struct { - int port1; - unsigned char mask1, match1; - int port2; - unsigned char mask2, match2; - int port3; - unsigned char mask3, match3; - int port4; - unsigned char mask4, match4; - int port_monitor; -}; - -#if defined(__alpha__) && !defined(CONFIG_PCI) -/* - * Digital did something really horribly wrong with the OUT1 and OUT2 - * lines on at least some ALPHA's. The failure mode is that if either - * is cleared, the machine locks up with endless interrupts. - * - * This is still used by arch/mips/au1000/common/serial.c for some weird - * reason (mips != alpha!) - */ -#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2 | UART_MCR_OUT1) -#elif defined(CONFIG_SBC8560) -/* - * WindRiver did something similarly broken on their SBC8560 board. The - * UART tristates its IRQ output while OUT2 is clear, but they pulled - * the interrupt line _up_ instead of down, so if we register the IRQ - * while the UART is in that state, we die in an IRQ storm. */ -#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2) -#else -#define ALPHA_KLUDGE_MCR 0 -#endif - #endif /* _LINUX_SERIAL_H */ -- cgit From c5f0508b992ad081ba378a59b2404966f9f89429 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 5 Mar 2012 14:52:13 +0100 Subject: TTY: amiserial, remove tasklet for tty_wakeup tty_wakeup is safe to be called from all contexts. No need to schedule a tasklet for that. Let's call it directly like in other drivers. This allows us to kill another member of async_struct structure. (If we remove the dummy uses in simserial.) Signed-off-by: Jiri Slaby Cc: Geert Uytterhoeven Cc: Tony Luck Cc: Fenghua Yu Signed-off-by: Greg Kroah-Hartman --- include/linux/serialP.h | 8 -------- 1 file changed, 8 deletions(-) (limited to 'include/linux') diff --git a/include/linux/serialP.h b/include/linux/serialP.h index c1acdb2c8584..beaf39f819d6 100644 --- a/include/linux/serialP.h +++ b/include/linux/serialP.h @@ -56,11 +56,9 @@ struct async_struct { unsigned short closing_wait; int IER; /* Interrupt Enable Register */ int MCR; /* Modem control register */ - unsigned long event; int line; int blocked_open; /* # of blocked opens */ struct circ_buf xmit; - struct tasklet_struct tlet; wait_queue_head_t open_wait; wait_queue_head_t close_wait; wait_queue_head_t delta_msr_wait; @@ -68,10 +66,4 @@ struct async_struct { struct async_struct *prev_port; }; -/* - * Events are used to schedule things to happen at timer-interrupt - * time, instead of at rs interrupt time. - */ -#define RS_EVENT_WRITE_WAKEUP 0 - #endif /* _LINUX_SERIAL_H */ -- cgit From d1c3414c2a9d10ef7f0f7665f5d2947cd088c093 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Mon, 5 Mar 2012 08:47:41 -0700 Subject: drivercore: Add driver probe deferral mechanism Allow drivers to report at probe time that they cannot get all the resources required by the device, and should be retried at a later time. This should completely solve the problem of getting devices initialized in the right order. Right now this is mostly handled by mucking about with initcall ordering which is a complete hack, and doesn't even remotely handle the case where device drivers are in modules. This approach completely sidesteps the issues by allowing driver registration to occur in any order, and any driver can request to be retried after a few more other drivers get probed. v4: - Integrate Manjunath's addition of a separate workqueue - Change -EAGAIN to -EPROBE_DEFER for drivers to trigger deferral - Update comment blocks to reflect how the code really works v3: - Hold off workqueue scheduling until late_initcall so that the bulk of driver probes are complete before we start retrying deferred devices. - Tested with simple use cases. Still needs more testing though. Using it to get rid of the gpio early_initcall madness, or to replace the ASoC internal probe deferral code would be ideal. v2: - added locking so it should no longer be utterly broken in that regard - remove device from deferred list at device_del time. - Still completely untested with any real use case, but has been boot tested. Signed-off-by: Grant Likely Cc: Mark Brown Cc: Arnd Bergmann Cc: Dilan Lee Cc: Manjunath GKondaiah Cc: Alan Stern Cc: Tony Lindgren Cc: Alan Cox Reviewed-by: Mark Brown Acked-by: David Daney Reviewed-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman --- include/linux/device.h | 5 +++++ include/linux/errno.h | 1 + 2 files changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/device.h b/include/linux/device.h index f62e21689fdd..22d6938ddbb4 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -585,6 +585,10 @@ struct device_dma_parameters { * @mutex: Mutex to synchronize calls to its driver. * @bus: Type of bus device is on. * @driver: Which driver has allocated this + * @deferred_probe: entry in deferred_probe_list which is used to retry the + * binding of drivers which were unable to get all the resources + * needed by the device; typically because it depends on another + * driver getting probed first. * @platform_data: Platform data specific to the device. * Example: For devices on custom boards, as typical of embedded * and SOC based hardware, Linux often uses platform_data to point @@ -644,6 +648,7 @@ struct device { struct bus_type *bus; /* type of bus device is on */ struct device_driver *driver; /* which driver has allocated this device */ + struct list_head deferred_probe; void *platform_data; /* Platform specific data, device core doesn't touch it */ struct dev_pm_info power; diff --git a/include/linux/errno.h b/include/linux/errno.h index 46685832ed99..2d09bfa5c262 100644 --- a/include/linux/errno.h +++ b/include/linux/errno.h @@ -16,6 +16,7 @@ #define ERESTARTNOHAND 514 /* restart if no handler.. */ #define ENOIOCTLCMD 515 /* No ioctl command */ #define ERESTART_RESTARTBLOCK 516 /* restart by calling sys_restart_syscall */ +#define EPROBE_DEFER 517 /* Driver requests probe retry */ /* Defined for the NFSv3 protocol */ #define EBADHANDLE 521 /* Illegal NFS file handle */ -- cgit From ef8a3fd6e5e12e8989dae97ba5491c2e39369af9 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 8 Mar 2012 12:17:22 -0800 Subject: driver core: move the deferred probe pointer into the private area Nothing outside of the driver core needs to get to the deferred probe pointer, so move it inside the private area of 'struct device' so no one tries to mess around with it. Cc: Grant Likely Signed-off-by: Greg Kroah-Hartman --- include/linux/device.h | 5 ----- 1 file changed, 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/device.h b/include/linux/device.h index 22d6938ddbb4..f62e21689fdd 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -585,10 +585,6 @@ struct device_dma_parameters { * @mutex: Mutex to synchronize calls to its driver. * @bus: Type of bus device is on. * @driver: Which driver has allocated this - * @deferred_probe: entry in deferred_probe_list which is used to retry the - * binding of drivers which were unable to get all the resources - * needed by the device; typically because it depends on another - * driver getting probed first. * @platform_data: Platform data specific to the device. * Example: For devices on custom boards, as typical of embedded * and SOC based hardware, Linux often uses platform_data to point @@ -648,7 +644,6 @@ struct device { struct bus_type *bus; /* type of bus device is on */ struct device_driver *driver; /* which driver has allocated this device */ - struct list_head deferred_probe; void *platform_data; /* Platform specific data, device core doesn't touch it */ struct dev_pm_info power; -- cgit From 979b6d89766ed573bca6a6e902193c4cad502909 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 5 Mar 2012 14:52:15 +0100 Subject: TTY: simserial, use only one copy of async flags The same as for amiserial. Use only one instance of the flags. Also remove them from async_struct now. Nobody else uses them. Signed-off-by: Jiri Slaby Cc: Tony Luck Cc: Fenghua Yu Signed-off-by: Greg Kroah-Hartman --- include/linux/serialP.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/serialP.h b/include/linux/serialP.h index beaf39f819d6..6741f57cc2ae 100644 --- a/include/linux/serialP.h +++ b/include/linux/serialP.h @@ -43,7 +43,6 @@ struct serial_state { struct async_struct { unsigned long port; - int flags; int xmit_fifo_size; struct serial_state *state; struct tty_struct *tty; -- cgit From d852256389f1bcf506710ea5de77debde40013b9 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 5 Mar 2012 14:52:16 +0100 Subject: TTY: simserial/amiserial, use one instance of other members This means: * close_delay * closing_wait * line * port * xmit_fifo_size This actually fixes a bug in amiserial. It initializes one and uses the other of the close delays. Yes, duplicating structure members is evil. Signed-off-by: Jiri Slaby Cc: Geert Uytterhoeven Cc: Tony Luck Cc: Fenghua Yu Signed-off-by: Greg Kroah-Hartman --- include/linux/serialP.h | 5 ----- 1 file changed, 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/serialP.h b/include/linux/serialP.h index 6741f57cc2ae..6ce488c46589 100644 --- a/include/linux/serialP.h +++ b/include/linux/serialP.h @@ -42,8 +42,6 @@ struct serial_state { }; struct async_struct { - unsigned long port; - int xmit_fifo_size; struct serial_state *state; struct tty_struct *tty; int read_status_mask; @@ -51,11 +49,8 @@ struct async_struct { int timeout; int quot; int x_char; /* xon/xoff character */ - int close_delay; - unsigned short closing_wait; int IER; /* Interrupt Enable Register */ int MCR; /* Modem control register */ - int line; int blocked_open; /* # of blocked opens */ struct circ_buf xmit; wait_queue_head_t open_wait; -- cgit From 964105b501071e8a0e9feb1d0e4b3e46508bc38e Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 5 Mar 2012 14:52:17 +0100 Subject: TTY: simserial, remove support of shared interrupts It never worked there. The ISR was never written for that kind of stuff. So remove all that crap with a hash of linked lists and pass the pointer directly to the ISR. BTW this answers the question there: * I don't know exactly why they don't use the dev_id opaque data * pointer instead of this extra lookup table -> Because they thought they will support more devices bound to a single interrupt w/o IRQF_SHARED. They would need exactly the hash there. What I don't understand is rebinding of the interrupt in the shutdown path. They perhaps meant to do just synchronize_irq? In any case, this is all gone and free_irq there properly. By removing the hash we save some bits (exactly NR_IRQS * 8 bytes of .bss and over a kilo of .text): before: text data bss dec hex filename 19600 320 8227 28147 6df3 ../a/ia64/arch/ia64/hp/sim/simserial.o after: text data bss dec hex filename 18568 320 28 18916 49e4 ../a/ia64/arch/ia64/hp/sim/simserial.o Note that a shared interrupt could not work too. request_irq requires data parameter to be non-NULL. So the whole IRQ_T exercise was pointless. Finally, this helps us remove another two members of async_struct :). Signed-off-by: Jiri Slaby Cc: Tony Luck Cc: Fenghua Yu Signed-off-by: Greg Kroah-Hartman --- include/linux/serialP.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/serialP.h b/include/linux/serialP.h index 6ce488c46589..b8543f902453 100644 --- a/include/linux/serialP.h +++ b/include/linux/serialP.h @@ -56,8 +56,6 @@ struct async_struct { wait_queue_head_t open_wait; wait_queue_head_t close_wait; wait_queue_head_t delta_msr_wait; - struct async_struct *next_port; /* For the linked list */ - struct async_struct *prev_port; }; #endif /* _LINUX_SERIAL_H */ -- cgit From 916b765675b7044bd5895b7430a2aa2c63ea4545 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 5 Mar 2012 14:52:20 +0100 Subject: TTY: serialP, merge serial_state and async_struct This is the final step to get rid of the one of the structures. A further cleanup will follow. And I struct serial_state deserves cease to exist after a switch to tty_port too. While changing the lines, it removes also pointless tty->driver_data casts. Signed-off-by: Jiri Slaby Cc: Geert Uytterhoeven Cc: Tony Luck Cc: Fenghua Yu Signed-off-by: Greg Kroah-Hartman --- include/linux/serialP.h | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/serialP.h b/include/linux/serialP.h index b8543f902453..984f5ba8da4e 100644 --- a/include/linux/serialP.h +++ b/include/linux/serialP.h @@ -38,24 +38,24 @@ struct serial_state { unsigned short close_delay; unsigned short closing_wait; /* time to wait before closing */ struct async_icount icount; - struct async_struct *info; -}; -struct async_struct { - struct serial_state *state; - struct tty_struct *tty; + /* amiserial */ int read_status_mask; int ignore_status_mask; int timeout; int quot; - int x_char; /* xon/xoff character */ int IER; /* Interrupt Enable Register */ int MCR; /* Modem control register */ + wait_queue_head_t delta_msr_wait; + /* simserial */ + int x_char; /* xon/xoff character */ int blocked_open; /* # of blocked opens */ struct circ_buf xmit; wait_queue_head_t open_wait; wait_queue_head_t close_wait; - wait_queue_head_t delta_msr_wait; + struct tty_struct *tty; + /* /simserial */ + /* /amiserial */ }; #endif /* _LINUX_SERIAL_H */ -- cgit From 87758791c99715433841f1c054b49166506513e4 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 5 Mar 2012 14:52:24 +0100 Subject: TTY: amiserial/simserial, use tty_port Add tty_port to serial_state and start using common tty port members from tty_port in amiserial and simserial. The rest will follow one by one. Signed-off-by: Jiri Slaby Cc: Geert Uytterhoeven Cc: Tony Luck Cc: Fenghua Yu Signed-off-by: Greg Kroah-Hartman --- include/linux/serialP.h | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/serialP.h b/include/linux/serialP.h index 984f5ba8da4e..32d45b869cbc 100644 --- a/include/linux/serialP.h +++ b/include/linux/serialP.h @@ -23,6 +23,7 @@ #include #include #include +#include #include struct serial_state { @@ -38,6 +39,7 @@ struct serial_state { unsigned short close_delay; unsigned short closing_wait; /* time to wait before closing */ struct async_icount icount; + struct tty_port tport; /* amiserial */ int read_status_mask; @@ -46,14 +48,9 @@ struct serial_state { int quot; int IER; /* Interrupt Enable Register */ int MCR; /* Modem control register */ - wait_queue_head_t delta_msr_wait; /* simserial */ int x_char; /* xon/xoff character */ - int blocked_open; /* # of blocked opens */ struct circ_buf xmit; - wait_queue_head_t open_wait; - wait_queue_head_t close_wait; - struct tty_struct *tty; /* /simserial */ /* /amiserial */ }; -- cgit From 799be6ff2fd7294f428a9e68a7786490c862c1af Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 5 Mar 2012 14:52:25 +0100 Subject: TTY: amiserial/simserial, use close delays from tty_port Note that previously simserial set the delay to 0. So we preserve that. BUT, is it correct? Signed-off-by: Jiri Slaby Cc: Geert Uytterhoeven Cc: Tony Luck Cc: Fenghua Yu Signed-off-by: Greg Kroah-Hartman --- include/linux/serialP.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/serialP.h b/include/linux/serialP.h index 32d45b869cbc..997edd008b92 100644 --- a/include/linux/serialP.h +++ b/include/linux/serialP.h @@ -36,8 +36,6 @@ struct serial_state { int xmit_fifo_size; int custom_divisor; int count; - unsigned short close_delay; - unsigned short closing_wait; /* time to wait before closing */ struct async_icount icount; struct tty_port tport; -- cgit From 12c8035435fa16e3f6b18049bb1d7815c00a7a58 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 5 Mar 2012 14:52:26 +0100 Subject: TTY: amiserial/simserial, use count from tty_port Nothing special. Just remove count from serial_state and change all users to use tty_port. Signed-off-by: Jiri Slaby Cc: Geert Uytterhoeven Cc: Tony Luck Cc: Fenghua Yu Signed-off-by: Greg Kroah-Hartman --- include/linux/serialP.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/serialP.h b/include/linux/serialP.h index 997edd008b92..a6612b9c7e84 100644 --- a/include/linux/serialP.h +++ b/include/linux/serialP.h @@ -35,7 +35,6 @@ struct serial_state { int line; int xmit_fifo_size; int custom_divisor; - int count; struct async_icount icount; struct tty_port tport; -- cgit From 01bd730d92bd002adc3f3317d8e3328c629b436c Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 5 Mar 2012 14:52:27 +0100 Subject: TTY: amiserial/simserial, use flags from tty_port This changes flags' type to ulong which is appropriate for all the set/clear_bits performed in the drivers.. Signed-off-by: Jiri Slaby Cc: Geert Uytterhoeven Cc: Tony Luck Cc: Fenghua Yu Signed-off-by: Greg Kroah-Hartman --- include/linux/serialP.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/serialP.h b/include/linux/serialP.h index a6612b9c7e84..e5e8442c08d6 100644 --- a/include/linux/serialP.h +++ b/include/linux/serialP.h @@ -30,7 +30,6 @@ struct serial_state { int baud_base; unsigned long port; int irq; - int flags; int type; int line; int xmit_fifo_size; -- cgit From 3c4782dcd9b8d02e79f0f0bd1fe6e30a79790526 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 5 Mar 2012 14:52:31 +0100 Subject: TTY: simserial no longer needs serialP Let's do a spin-off of serial_state structure with only needed elements. And remove serialP crap from includes. Signed-off-by: Jiri Slaby Cc: Tony Luck Cc: Fenghua Yu Signed-off-by: Greg Kroah-Hartman --- include/linux/serialP.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/serialP.h b/include/linux/serialP.h index e5e8442c08d6..9a04dec1589a 100644 --- a/include/linux/serialP.h +++ b/include/linux/serialP.h @@ -44,10 +44,8 @@ struct serial_state { int quot; int IER; /* Interrupt Enable Register */ int MCR; /* Modem control register */ - /* simserial */ int x_char; /* xon/xoff character */ struct circ_buf xmit; - /* /simserial */ /* /amiserial */ }; -- cgit From ff169e5cbec29d33765687c7131673316011b328 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 5 Mar 2012 14:52:44 +0100 Subject: TTY: amiserial, stop using serial_state->{irq,type,line} * instead of line, use tty->index or iterator... * irq and type are left unset. So get rid of them. Signed-off-by: Jiri Slaby Cc: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman --- include/linux/serialP.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/serialP.h b/include/linux/serialP.h index 9a04dec1589a..77afbdb134ae 100644 --- a/include/linux/serialP.h +++ b/include/linux/serialP.h @@ -29,9 +29,6 @@ struct serial_state { int baud_base; unsigned long port; - int irq; - int type; - int line; int xmit_fifo_size; int custom_divisor; struct async_icount icount; -- cgit From 6fe18d26b1c33d5cb748f8694ee1a59dc5578da4 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 5 Mar 2012 14:52:45 +0100 Subject: TTY: amiserial no longer needs serialP amiserial is the last user of serialP.h. Let's move struct serial_state directly to amiserial and remove serialP crap from includes. Finally, remove the header from the tree completely. Signed-off-by: Jiri Slaby Cc: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman --- include/linux/serialP.h | 49 ------------------------------------------------- 1 file changed, 49 deletions(-) delete mode 100644 include/linux/serialP.h (limited to 'include/linux') diff --git a/include/linux/serialP.h b/include/linux/serialP.h deleted file mode 100644 index 77afbdb134ae..000000000000 --- a/include/linux/serialP.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Private header file for the (dumb) serial driver - * - * Copyright (C) 1997 by Theodore Ts'o. - * - * Redistribution of this file is permitted under the terms of the GNU - * Public License (GPL) - */ - -#ifndef _LINUX_SERIALP_H -#define _LINUX_SERIALP_H - -/* - * This is our internal structure for each serial port's state. - * - * Many fields are paralleled by the structure used by the serial_struct - * structure. - * - * For definitions of the flags field, see tty.h - */ - -#include -#include -#include -#include -#include -#include - -struct serial_state { - int baud_base; - unsigned long port; - int xmit_fifo_size; - int custom_divisor; - struct async_icount icount; - struct tty_port tport; - - /* amiserial */ - int read_status_mask; - int ignore_status_mask; - int timeout; - int quot; - int IER; /* Interrupt Enable Register */ - int MCR; /* Modem control register */ - int x_char; /* xon/xoff character */ - struct circ_buf xmit; - /* /amiserial */ -}; - -#endif /* _LINUX_SERIAL_H */ -- cgit From 3cc3615749dbd1b891512d5c9a5bf4559cfa9741 Mon Sep 17 00:00:00 2001 From: Bjørn Mork Date: Tue, 6 Mar 2012 17:29:22 +0100 Subject: usb: cdc-wdm: adding usb_cdc_wdm_register subdriver support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This driver can be used as a subdriver of another USB driver, allowing it to export a Device Managment interface consisting of a single interrupt endpoint with no dedicated USB interface. Some devices provide a Device Management function combined with a wwan function in a single USB interface having three endpoints (bulk in/out + interrupt). If the interrupt endpoint is used exclusively for DM notifications, then this driver can support that as a subdriver provided that the wwan driver calls the appropriate entry points on probe, suspend, resume, pre_reset, post_reset and disconnect. The main driver must have full control over all interface related settings, including the needs_remote_wakeup flag. A manage_power function must be provided by the main driver. A manage_power stub doing direct flag manipulation is used in normal driver mode. Signed-off-by: Bjørn Mork Acked-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/cdc-wdm.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) create mode 100644 include/linux/usb/cdc-wdm.h (limited to 'include/linux') diff --git a/include/linux/usb/cdc-wdm.h b/include/linux/usb/cdc-wdm.h new file mode 100644 index 000000000000..719c332620fa --- /dev/null +++ b/include/linux/usb/cdc-wdm.h @@ -0,0 +1,19 @@ +/* + * USB CDC Device Management subdriver + * + * Copyright (c) 2012 Bjørn Mork + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + */ + +#ifndef __LINUX_USB_CDC_WDM_H +#define __LINUX_USB_CDC_WDM_H + +extern struct usb_driver *usb_cdc_wdm_register(struct usb_interface *intf, + struct usb_endpoint_descriptor *ep, + int bufsize, + int (*manage_power)(struct usb_interface *, int)); + +#endif /* __LINUX_USB_CDC_WDM_H */ -- cgit From cb5d76999029ae7a517cb07dfa732c1b5a934fc2 Mon Sep 17 00:00:00 2001 From: Stephane Eranian Date: Thu, 9 Feb 2012 23:21:05 +0100 Subject: perf: Add ABI reference sizes This patch adds reference sizes for revision 1 and 2 of the perf_event ABI, i.e., the size of the perf_event_attr struct. With Rev1: config2 was added = +8 bytes With Rev2: branch_sample_type was added = +8 bytes Adds the definition for Rev1, Rev2. This is useful for tools trying to decode the revision numbers based on the size of the struct. Signed-off-by: Stephane Eranian Cc: peterz@infradead.org Cc: acme@redhat.com Cc: robert.richter@amd.com Cc: ming.m.lin@intel.com Cc: andi@firstfloor.org Cc: asharma@fb.com Cc: ravitillo@lbl.gov Cc: vweaver1@eecs.utk.edu Cc: khandual@linux.vnet.ibm.com Cc: dsahern@gmail.com Link: http://lkml.kernel.org/r/1328826068-11713-16-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar --- include/linux/perf_event.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index fbbf5e598368..bd9f55a5958d 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -192,6 +192,8 @@ enum perf_event_read_format { }; #define PERF_ATTR_SIZE_VER0 64 /* sizeof first published struct */ +#define PERF_ATTR_SIZE_VER1 72 /* add: config2 */ +#define PERF_ATTR_SIZE_VER2 80 /* add: branch_sample_type */ /* * Hardware event_id to monitor via a performance monitoring event: -- cgit From 4bcdf1d0b652bc33d52f2322b77463e4dc58abf8 Mon Sep 17 00:00:00 2001 From: Alexander Gordeev Date: Fri, 9 Mar 2012 14:59:26 +0100 Subject: genirq: Get rid of unnecessary irqaction field in task_struct When a new thread handler is created, an irqaction is passed to it as data. Not only that irqaction is stored in task_struct by the handler for later use, but also a structure associated with the kernel thread keeps this value as long as the thread exists. This fix kicks irqaction out off task_struct. Yes, I introduce new bit field. But it allows not only to eliminate the duplicate, but also shortens size of task_struct. Reported-by: Oleg Nesterov Signed-off-by: Alexander Gordeev Link: http://lkml.kernel.org/r/20120309135925.GB2114@dhcp-26-207.brq.redhat.com Signed-off-by: Thomas Gleixner --- include/linux/sched.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index 7d379a6bfd88..07f537a371ce 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1319,6 +1319,11 @@ struct task_struct { unsigned sched_reset_on_fork:1; unsigned sched_contributes_to_load:1; +#ifdef CONFIG_GENERIC_HARDIRQS + /* IRQ handler threads */ + unsigned irq_thread:1; +#endif + pid_t pid; pid_t tgid; @@ -1427,11 +1432,6 @@ struct task_struct { * mempolicy */ spinlock_t alloc_lock; -#ifdef CONFIG_GENERIC_HARDIRQS - /* IRQ handler threads */ - struct irqaction *irqaction; -#endif - /* Protection of the PI data structures: */ raw_spinlock_t pi_lock; -- cgit From 927353a75602dd97144352f53177e18093fdd198 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Thu, 8 Mar 2012 19:12:12 -0500 Subject: serial: introduce generic port in/out helpers Looking at the existing serial drivers (esp. the 8250 derived variants) we see a common trend. They create a hardware specific port struct, which in turn contains a generic serial_port struct. The other trend, is that they all create some sort of shortcut to go through the hardware specific struct, to the serial_port struct, which has the basic in/out operations within. Looking for the serial_in and serial_out in several drivers shows this. Rather than let this continue, lets create a generic set of similar helper wrappers that can be used on a struct port, so we can eliminate bouncing out through hardware specific struct pointers just to come back into struct port where possible. Signed-off-by: Paul Gortmaker Acked-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- include/linux/serial_core.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/linux') diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 585bfd03d2ee..f51bf2e70c69 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -383,6 +383,16 @@ struct uart_port { void *private_data; /* generic platform data pointer */ }; +static inline int serial_port_in(struct uart_port *up, int offset) +{ + return up->serial_in(up, offset); +} + +static inline void serial_port_out(struct uart_port *up, int offset, int value) +{ + up->serial_out(up, offset, value); +} + /* * This is the state information which is persistent across opens. */ -- cgit From bdcc0924c8c6e6362bb93b6120631f257aac6f87 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 7 Mar 2012 20:53:36 -0500 Subject: net: Use bool in skbuff.h helper functions. In particular do this for skb_is_nonlinear(), skb_is_gso(), and skb_is_gso_v6(). Signed-off-by: David S. Miller --- include/linux/skbuff.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 79ef8209bbb7..8dc8257eab8b 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -1173,7 +1173,7 @@ static inline struct sk_buff *__skb_dequeue_tail(struct sk_buff_head *list) } -static inline int skb_is_nonlinear(const struct sk_buff *skb) +static inline bool skb_is_nonlinear(const struct sk_buff *skb) { return skb->data_len; } @@ -2469,12 +2469,12 @@ static inline struct sec_path *skb_sec_path(struct sk_buff *skb) } #endif -static inline int skb_is_gso(const struct sk_buff *skb) +static inline bool skb_is_gso(const struct sk_buff *skb) { return skb_shinfo(skb)->gso_size; } -static inline int skb_is_gso_v6(const struct sk_buff *skb) +static inline bool skb_is_gso_v6(const struct sk_buff *skb) { return skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6; } -- cgit From 4d29515f5a2e062c3fe82bfb574da70ed544ffad Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 7 Mar 2012 21:02:35 -0500 Subject: net: Use bool in netdevice.h helpers. Specifically use it in napi_disable_pending(), napi_schedule_prep(), napi_reschedule(), netif_tx_queue_stopped(), netif_queue_stopped(), netif_xmit_stopped(), netif_xmit_frozen_or_stopped(), netif_running(), __netif_subqueue_stopped(), netif_subqueue_stopped(), netif_is_multiquue(), netif_carrier_ok(), netif_dormant(), netif_oper_up(), netif_device_present(), __netif_tx_trylock(), net_gso_ok(), skb_gso_ok(), netif_needs_gso(), and netif_is_bond_slave(). Signed-off-by: David S. Miller --- include/linux/netdevice.h | 52 +++++++++++++++++++++++------------------------ 1 file changed, 26 insertions(+), 26 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index a89933bc4f2f..b195a34440bb 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -417,7 +417,7 @@ typedef rx_handler_result_t rx_handler_func_t(struct sk_buff **pskb); extern void __napi_schedule(struct napi_struct *n); -static inline int napi_disable_pending(struct napi_struct *n) +static inline bool napi_disable_pending(struct napi_struct *n) { return test_bit(NAPI_STATE_DISABLE, &n->state); } @@ -431,7 +431,7 @@ static inline int napi_disable_pending(struct napi_struct *n) * insure only one NAPI poll instance runs. We also make * sure there is no pending NAPI disable. */ -static inline int napi_schedule_prep(struct napi_struct *n) +static inline bool napi_schedule_prep(struct napi_struct *n) { return !napi_disable_pending(n) && !test_and_set_bit(NAPI_STATE_SCHED, &n->state); @@ -451,13 +451,13 @@ static inline void napi_schedule(struct napi_struct *n) } /* Try to reschedule poll. Called by dev->poll() after napi_complete(). */ -static inline int napi_reschedule(struct napi_struct *napi) +static inline bool napi_reschedule(struct napi_struct *napi) { if (napi_schedule_prep(napi)) { __napi_schedule(napi); - return 1; + return true; } - return 0; + return false; } /** @@ -1868,7 +1868,7 @@ static inline void netif_tx_stop_all_queues(struct net_device *dev) } } -static inline int netif_tx_queue_stopped(const struct netdev_queue *dev_queue) +static inline bool netif_tx_queue_stopped(const struct netdev_queue *dev_queue) { return test_bit(__QUEUE_STATE_DRV_XOFF, &dev_queue->state); } @@ -1879,17 +1879,17 @@ static inline int netif_tx_queue_stopped(const struct netdev_queue *dev_queue) * * Test if transmit queue on device is currently unable to send. */ -static inline int netif_queue_stopped(const struct net_device *dev) +static inline bool netif_queue_stopped(const struct net_device *dev) { return netif_tx_queue_stopped(netdev_get_tx_queue(dev, 0)); } -static inline int netif_xmit_stopped(const struct netdev_queue *dev_queue) +static inline bool netif_xmit_stopped(const struct netdev_queue *dev_queue) { return dev_queue->state & QUEUE_STATE_ANY_XOFF; } -static inline int netif_xmit_frozen_or_stopped(const struct netdev_queue *dev_queue) +static inline bool netif_xmit_frozen_or_stopped(const struct netdev_queue *dev_queue) { return dev_queue->state & QUEUE_STATE_ANY_XOFF_OR_FROZEN; } @@ -1954,7 +1954,7 @@ static inline void netdev_reset_queue(struct net_device *dev_queue) * * Test if the device has been brought up. */ -static inline int netif_running(const struct net_device *dev) +static inline bool netif_running(const struct net_device *dev) { return test_bit(__LINK_STATE_START, &dev->state); } @@ -2004,16 +2004,16 @@ static inline void netif_stop_subqueue(struct net_device *dev, u16 queue_index) * * Check individual transmit queue of a device with multiple transmit queues. */ -static inline int __netif_subqueue_stopped(const struct net_device *dev, - u16 queue_index) +static inline bool __netif_subqueue_stopped(const struct net_device *dev, + u16 queue_index) { struct netdev_queue *txq = netdev_get_tx_queue(dev, queue_index); return netif_tx_queue_stopped(txq); } -static inline int netif_subqueue_stopped(const struct net_device *dev, - struct sk_buff *skb) +static inline bool netif_subqueue_stopped(const struct net_device *dev, + struct sk_buff *skb) { return __netif_subqueue_stopped(dev, skb_get_queue_mapping(skb)); } @@ -2052,7 +2052,7 @@ static inline u16 skb_tx_hash(const struct net_device *dev, * * Check if device has multiple transmit queues */ -static inline int netif_is_multiqueue(const struct net_device *dev) +static inline bool netif_is_multiqueue(const struct net_device *dev) { return dev->num_tx_queues > 1; } @@ -2188,7 +2188,7 @@ extern void linkwatch_forget_dev(struct net_device *dev); * * Check if carrier is present on device */ -static inline int netif_carrier_ok(const struct net_device *dev) +static inline bool netif_carrier_ok(const struct net_device *dev) { return !test_bit(__LINK_STATE_NOCARRIER, &dev->state); } @@ -2240,7 +2240,7 @@ static inline void netif_dormant_off(struct net_device *dev) * * Check if carrier is present on device */ -static inline int netif_dormant(const struct net_device *dev) +static inline bool netif_dormant(const struct net_device *dev) { return test_bit(__LINK_STATE_DORMANT, &dev->state); } @@ -2252,7 +2252,7 @@ static inline int netif_dormant(const struct net_device *dev) * * Check if carrier is operational */ -static inline int netif_oper_up(const struct net_device *dev) +static inline bool netif_oper_up(const struct net_device *dev) { return (dev->operstate == IF_OPER_UP || dev->operstate == IF_OPER_UNKNOWN /* backward compat */); @@ -2264,7 +2264,7 @@ static inline int netif_oper_up(const struct net_device *dev) * * Check if device has not been removed from system. */ -static inline int netif_device_present(struct net_device *dev) +static inline bool netif_device_present(struct net_device *dev) { return test_bit(__LINK_STATE_PRESENT, &dev->state); } @@ -2334,9 +2334,9 @@ static inline void __netif_tx_lock_bh(struct netdev_queue *txq) txq->xmit_lock_owner = smp_processor_id(); } -static inline int __netif_tx_trylock(struct netdev_queue *txq) +static inline bool __netif_tx_trylock(struct netdev_queue *txq) { - int ok = spin_trylock(&txq->_xmit_lock); + bool ok = spin_trylock(&txq->_xmit_lock); if (likely(ok)) txq->xmit_lock_owner = smp_processor_id(); return ok; @@ -2614,7 +2614,7 @@ void netif_stacked_transfer_operstate(const struct net_device *rootdev, netdev_features_t netif_skb_features(struct sk_buff *skb); -static inline int net_gso_ok(netdev_features_t features, int gso_type) +static inline bool net_gso_ok(netdev_features_t features, int gso_type) { netdev_features_t feature = gso_type << NETIF_F_GSO_SHIFT; @@ -2629,14 +2629,14 @@ static inline int net_gso_ok(netdev_features_t features, int gso_type) return (features & feature) == feature; } -static inline int skb_gso_ok(struct sk_buff *skb, netdev_features_t features) +static inline bool skb_gso_ok(struct sk_buff *skb, netdev_features_t features) { return net_gso_ok(features, skb_shinfo(skb)->gso_type) && (!skb_has_frag_list(skb) || (features & NETIF_F_FRAGLIST)); } -static inline int netif_needs_gso(struct sk_buff *skb, - netdev_features_t features) +static inline bool netif_needs_gso(struct sk_buff *skb, + netdev_features_t features) { return skb_is_gso(skb) && (!skb_gso_ok(skb, features) || unlikely(skb->ip_summed != CHECKSUM_PARTIAL)); @@ -2648,7 +2648,7 @@ static inline void netif_set_gso_max_size(struct net_device *dev, dev->gso_max_size = size; } -static inline int netif_is_bond_slave(struct net_device *dev) +static inline bool netif_is_bond_slave(struct net_device *dev) { return dev->flags & IFF_SLAVE && dev->priv_flags & IFF_BONDING; } -- cgit From cd4946188aac597d187a765127fd26fa3644c29f Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Sat, 25 Feb 2012 11:25:58 +0100 Subject: driver-core: Allow additional parameters for module_driver Allow module_driver take additional parameters which will be passed to the register and unregister function calls. This allows it to be used in cases where additional parameters are required (e.g. usb_serial_register_drivers). Signed-off-by: Lars-Peter Clausen Signed-off-by: Greg Kroah-Hartman --- include/linux/device.h | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/device.h b/include/linux/device.h index b63fb393aa58..bccccef520dc 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -1007,19 +1007,20 @@ extern long sysfs_deprecated; * @__driver: driver name * @__register: register function for this driver type * @__unregister: unregister function for this driver type + * @...: Additional arguments to be passed to __register and __unregister. * * Use this macro to construct bus specific macros for registering * drivers, and do not use it on its own. */ -#define module_driver(__driver, __register, __unregister) \ +#define module_driver(__driver, __register, __unregister, ...) \ static int __init __driver##_init(void) \ { \ - return __register(&(__driver)); \ + return __register(&(__driver) , ##__VA_ARGS__); \ } \ module_init(__driver##_init); \ static void __exit __driver##_exit(void) \ { \ - __unregister(&(__driver)); \ + __unregister(&(__driver) , ##__VA_ARGS__); \ } \ module_exit(__driver##_exit); -- cgit From b790f5d1260b4c962bd066cd34ae982943c27fe1 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 9 Mar 2012 16:38:14 -0800 Subject: USB: serial: use module_driver() macro Now that module_driver() can handle varargs, use it instead of rolling our own version. Cc: Lars-Peter Clausen Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/serial.h | 17 ++--------------- 1 file changed, 2 insertions(+), 15 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index 7b1db841e2a8..fbb666b1b670 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -416,23 +416,10 @@ do { \ * module may only use this macro once, and calling it replaces * module_init() and module_exit() * - * Note, we can't use the generic module_driver() call here, due to the - * two parameters in the usb_serial_* functions, so we roll our own here - * :( */ #define module_usb_serial_driver(__usb_driver, __serial_drivers) \ -static int __init usb_serial_driver_init(void) \ -{ \ - return usb_serial_register_drivers(&(__usb_driver), \ - (__serial_drivers)); \ -} \ -module_init(usb_serial_driver_init); \ -static void __exit usb_serial_driver_exit(void) \ -{ \ - return usb_serial_deregister_drivers(&(__usb_driver), \ - (__serial_drivers)); \ -} \ -module_exit(usb_serial_driver_exit); + module_driver(__usb_driver, usb_serial_register_drivers, \ + usb_serial_deregister_drivers, __serial_drivers) #endif /* __LINUX_USB_SERIAL_H */ -- cgit From 43db362d3adda9e0a915ddb9a8d1a41186e19179 Mon Sep 17 00:00:00 2001 From: Maciej Żenczykowski Date: Sun, 11 Mar 2012 12:51:50 +0000 Subject: net: get rid of some pointless casts to sockaddr MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The following 4 functions: move_addr_to_kernel move_addr_to_user verify_iovec verify_compat_iovec are always effectively called with a sockaddr_storage. Make this explicit by changing their signature. This removes a large number of casts from sockaddr_storage to sockaddr. Signed-off-by: Maciej Żenczykowski Signed-off-by: David S. Miller --- include/linux/socket.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/socket.h b/include/linux/socket.h index d0e77f607a79..da2d3e2543f3 100644 --- a/include/linux/socket.h +++ b/include/linux/socket.h @@ -326,11 +326,11 @@ extern int csum_partial_copy_fromiovecend(unsigned char *kdata, int offset, unsigned int len, __wsum *csump); -extern int verify_iovec(struct msghdr *m, struct iovec *iov, struct sockaddr *address, int mode); +extern int verify_iovec(struct msghdr *m, struct iovec *iov, struct sockaddr_storage *address, int mode); extern int memcpy_toiovec(struct iovec *v, unsigned char *kdata, int len); extern int memcpy_toiovecend(const struct iovec *v, unsigned char *kdata, int offset, int len); -extern int move_addr_to_kernel(void __user *uaddr, int ulen, struct sockaddr *kaddr); +extern int move_addr_to_kernel(void __user *uaddr, int ulen, struct sockaddr_storage *kaddr); extern int put_cmsg(struct msghdr*, int level, int type, int len, void *data); struct timespec; -- cgit From f99298bfa7c42da8d27c2b42050941471c0866ab Mon Sep 17 00:00:00 2001 From: Andiry Xu Date: Mon, 12 Dec 2011 16:45:28 +0800 Subject: xHCI: BESL calculation based on USB2.0 LPM errata The latest released errata for USB2.0 ECN LPM adds new fields to USB2.0 extension descriptor, defines two BESL values for device: baseline BESL and deep BESL. Baseline BESL value communicates a nominal power savings design point and the deep BESL value communicates a significant power savings design point. If device indicates BESL value, driver will use a value count in both host BESL and device BESL. Use baseline BESL value as default. Signed-off-by: Andiry Xu Tested-by: Jason Fan Signed-off-by: Sarah Sharp --- include/linux/usb/ch9.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index 3b6f628880f8..af21f3115919 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -789,6 +789,11 @@ struct usb_ext_cap_descriptor { /* Link Power Management */ __u8 bDevCapabilityType; __le32 bmAttributes; #define USB_LPM_SUPPORT (1 << 1) /* supports LPM */ +#define USB_BESL_SUPPORT (1 << 2) /* supports BESL */ +#define USB_BESL_BASELINE_VALID (1 << 3) /* Baseline BESL valid*/ +#define USB_BESL_DEEP_VALID (1 << 4) /* Deep BESL valid */ +#define USB_GET_BESL_BASELINE(p) (((p) & (0xf << 8)) >> 8) +#define USB_GET_BESL_DEEP(p) (((p) & (0xf << 12)) >> 12) } __attribute__((packed)); #define USB_DT_USB_EXT_CAP_SIZE 7 -- cgit From 4486ea987efdaa546bdda569e3dfacdc14a9fb13 Mon Sep 17 00:00:00 2001 From: Bala Shanmugam Date: Wed, 7 Mar 2012 17:27:12 +0530 Subject: cfg80211: Add background scan period attribute. Receive background scan period as part of connect command and pass the same to the driver. Signed-off-by: Bala Shanmugam Signed-off-by: John W. Linville --- include/linux/nl80211.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index c37d67add090..e474f6e780cc 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -369,6 +369,11 @@ * %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE and * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT. + * Background scan period can optionally be + * specified in %NL80211_ATTR_BG_SCAN_PERIOD, + * if not specified default background scan configuration + * in driver is used and if period value is 0, bg scan will be disabled. + * This attribute is ignored if driver does not support roam scan. * It is also sent as an event, with the BSSID and response IEs when the * connection is established or failed to be established. This can be * determined by the STATUS_CODE attribute. @@ -1207,6 +1212,9 @@ enum nl80211_commands { * this attribute is (depending on the driver capabilities) added to * received frames indicated with %NL80211_CMD_FRAME. * + * @NL80211_ATTR_BG_SCAN_PERIOD: Background scan period in seconds + * or 0 to disable background scan. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1456,6 +1464,8 @@ enum nl80211_attrs { NL80211_ATTR_RX_SIGNAL_DBM, + NL80211_ATTR_BG_SCAN_PERIOD, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -- cgit From 3ccf3e8306156a28213adc720aba807e9a901ad5 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 27 Feb 2012 10:47:00 +0100 Subject: printk/sched: Introduce special printk_sched() for those awkward moments There's a few awkward printk()s inside of scheduler guts that people prefer to keep but really are rather deadlock prone. Fudge around it by storing the text in a per-cpu buffer and poll it using the existing printk_tick() handler. This will drop output when its more frequent than once a tick, however only the affinity thing could possible go that fast and for that just one should suffice to notify the admin he's done something silly.. Signed-off-by: Peter Zijlstra Cc: Linus Torvalds Cc: Andrew Morton Link: http://lkml.kernel.org/n/tip-wua3lmkt3dg8nfts66o6brne@git.kernel.org Signed-off-by: Ingo Molnar --- include/linux/printk.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/linux') diff --git a/include/linux/printk.h b/include/linux/printk.h index f0e22f75143f..1f77a4174ee0 100644 --- a/include/linux/printk.h +++ b/include/linux/printk.h @@ -100,6 +100,11 @@ int vprintk(const char *fmt, va_list args); asmlinkage __printf(1, 2) __cold int printk(const char *fmt, ...); +/* + * Special printk facility for scheduler use only, _DO_NOT_USE_ ! + */ +__printf(1, 2) __cold int printk_sched(const char *fmt, ...); + /* * Please don't use printk_ratelimit(), because it shares ratelimiting state * with all other unrelated printk_ratelimit() callsites. Instead use @@ -127,6 +132,11 @@ int printk(const char *s, ...) { return 0; } +static inline __printf(1, 2) __cold +int printk_sched(const char *s, ...) +{ + return 0; +} static inline int printk_ratelimit(void) { return 0; -- cgit From 5c4903549c05bbb373479e0ce2992573c120654a Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Tue, 7 Feb 2012 02:29:01 +0000 Subject: net: Fix issue with netdev_tx_reset_queue not resetting queue from XOFF state We are seeing dev_watchdog hangs on several drivers. I suspect this is due to the __QUEUE_STATE_STACK_XOFF bit being set prior to a reset for link change, and then not being cleared by netdev_tx_reset_queue. This change corrects that. In addition we were seeing dev_watchdog hangs on igb after running the ethtool tests. We found this to be due to the fact that the ethtool test runs the same logic as ndo_start_xmit, but we were never clearing the XOFF flag since the loopback test in ethtool does not do byte queue accounting. Signed-off-by: Alexander Duyck Tested-by: Stephen Ko Signed-off-by: Jeff Kirsher --- include/linux/netdevice.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index b195a34440bb..4bf314fe2145 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1939,6 +1939,7 @@ static inline void netdev_completed_queue(struct net_device *dev, static inline void netdev_tx_reset_queue(struct netdev_queue *q) { #ifdef CONFIG_BQL + clear_bit(__QUEUE_STATE_STACK_XOFF, &q->state); dql_reset(&q->dql); #endif } -- cgit From b37c0fbe3f6dfba1f8ad2aed47fb40578a254635 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Tue, 7 Feb 2012 02:29:06 +0000 Subject: net: Add memory barriers to prevent possible race in byte queue limits This change adds a memory barrier to the byte queue limit code to address a possible race as has been seen in the past with the netif_stop_queue/netif_wake_queue logic. Signed-off-by: Alexander Duyck Tested-by: Stephen Ko Signed-off-by: Jeff Kirsher --- include/linux/netdevice.h | 49 +++++++++++++++++++++++++++++++---------------- 1 file changed, 33 insertions(+), 16 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 4bf314fe2145..4535a4ea9760 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1899,12 +1899,22 @@ static inline void netdev_tx_sent_queue(struct netdev_queue *dev_queue, { #ifdef CONFIG_BQL dql_queued(&dev_queue->dql, bytes); - if (unlikely(dql_avail(&dev_queue->dql) < 0)) { - set_bit(__QUEUE_STATE_STACK_XOFF, &dev_queue->state); - if (unlikely(dql_avail(&dev_queue->dql) >= 0)) - clear_bit(__QUEUE_STATE_STACK_XOFF, - &dev_queue->state); - } + + if (likely(dql_avail(&dev_queue->dql) >= 0)) + return; + + set_bit(__QUEUE_STATE_STACK_XOFF, &dev_queue->state); + + /* + * The XOFF flag must be set before checking the dql_avail below, + * because in netdev_tx_completed_queue we update the dql_completed + * before checking the XOFF flag. + */ + smp_mb(); + + /* check again in case another CPU has just made room avail */ + if (unlikely(dql_avail(&dev_queue->dql) >= 0)) + clear_bit(__QUEUE_STATE_STACK_XOFF, &dev_queue->state); #endif } @@ -1917,16 +1927,23 @@ static inline void netdev_tx_completed_queue(struct netdev_queue *dev_queue, unsigned pkts, unsigned bytes) { #ifdef CONFIG_BQL - if (likely(bytes)) { - dql_completed(&dev_queue->dql, bytes); - if (unlikely(test_bit(__QUEUE_STATE_STACK_XOFF, - &dev_queue->state) && - dql_avail(&dev_queue->dql) >= 0)) { - if (test_and_clear_bit(__QUEUE_STATE_STACK_XOFF, - &dev_queue->state)) - netif_schedule_queue(dev_queue); - } - } + if (unlikely(!bytes)) + return; + + dql_completed(&dev_queue->dql, bytes); + + /* + * Without the memory barrier there is a small possiblity that + * netdev_tx_sent_queue will miss the update and cause the queue to + * be stopped forever + */ + smp_mb(); + + if (dql_avail(&dev_queue->dql) < 0) + return; + + if (test_and_clear_bit(__QUEUE_STATE_STACK_XOFF, &dev_queue->state)) + netif_schedule_queue(dev_queue); #endif } -- cgit From 9993bc635d01a6ee7f6b833b4ee65ce7c06350b1 Mon Sep 17 00:00:00 2001 From: Salman Qazi Date: Fri, 9 Mar 2012 16:41:01 -0800 Subject: sched/x86: Fix overflow in cyc2ns_offset When a machine boots up, the TSC generally gets reset. However, when kexec is used to boot into a kernel, the TSC value would be carried over from the previous kernel. The computation of cycns_offset in set_cyc2ns_scale is prone to an overflow, if the machine has been up more than 208 days prior to the kexec. The overflow happens when we multiply *scale, even though there is enough room to store the final answer. We fix this issue by decomposing tsc_now into the quotient and remainder of division by CYC2NS_SCALE_FACTOR and then performing the multiplication separately on the two components. Refactor code to share the calculation with the previous fix in __cycles_2_ns(). Signed-off-by: Salman Qazi Acked-by: John Stultz Acked-by: Peter Zijlstra Cc: Paul Turner Cc: john stultz Link: http://lkml.kernel.org/r/20120310004027.19291.88460.stgit@dungbeetle.mtv.corp.google.com Signed-off-by: Ingo Molnar --- include/linux/kernel.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'include/linux') diff --git a/include/linux/kernel.h b/include/linux/kernel.h index e8343422240a..d801acb5e680 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -85,6 +85,19 @@ } \ ) +/* + * Multiplies an integer by a fraction, while avoiding unnecessary + * overflow or loss of precision. + */ +#define mult_frac(x, numer, denom)( \ +{ \ + typeof(x) quot = (x) / (denom); \ + typeof(x) rem = (x) % (denom); \ + (quot * (numer)) + ((rem * (numer)) / (denom)); \ +} \ +) + + #define _RET_IP_ (unsigned long)__builtin_return_address(0) #define _THIS_IP_ ({ __label__ __here; __here: (unsigned long)&&__here; }) -- cgit From 8816230e13d0c3c6ba51916d20e6d204646abf03 Mon Sep 17 00:00:00 2001 From: Huajun Li Date: Mon, 12 Mar 2012 21:00:19 +0800 Subject: USB: dynamically allocate usb_device children pointers instead of using a fix array Non-hub device has no child, and even a real USB hub has ports far less than USB_MAXCHILDREN, so there is no need using a fix array for child devices, just allocate it dynamically according real port number. Signed-off-by: Huajun Li Signed-off-by: Greg Kroah-Hartman --- include/linux/usb.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/usb.h b/include/linux/usb.h index 0c51663f2733..73b68d1f2cb0 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -501,7 +501,7 @@ struct usb_device { #endif int maxchild; - struct usb_device *children[USB_MAXCHILDREN]; + struct usb_device **children; u32 quirks; atomic_t urbnum; -- cgit From e485ceac9ebd43901ef0ce13622385d509e072e7 Mon Sep 17 00:00:00 2001 From: "K. Y. Srinivasan" Date: Sat, 10 Mar 2012 15:32:08 -0800 Subject: Drivers: hv: Add new message types to enhance KVP Add additional KVP (Key Value Pair) protocol messages to enhance KVP functionality for Linux guests on Hyper-V. As part of this, patch define an explicit version negoitiation message. Reviewed-by: Haiyang Zhang Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- include/linux/hyperv.h | 30 +++++++++++++++++++++++++++--- 1 file changed, 27 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index e57a6c6ee0e8..a2d8c547f91b 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -149,7 +149,11 @@ struct hv_kvp_exchg_msg_value { __u32 key_size; __u32 value_size; __u8 key[HV_KVP_EXCHANGE_MAX_KEY_SIZE]; - __u8 value[HV_KVP_EXCHANGE_MAX_VALUE_SIZE]; + union { + __u8 value[HV_KVP_EXCHANGE_MAX_VALUE_SIZE]; + __u32 value_u32; + __u64 value_u64; + }; } __attribute__((packed)); struct hv_kvp_msg_enumerate { @@ -157,11 +161,31 @@ struct hv_kvp_msg_enumerate { struct hv_kvp_exchg_msg_value data; } __attribute__((packed)); +struct hv_kvp_msg_get { + struct hv_kvp_exchg_msg_value data; +}; + +struct hv_kvp_msg_set { + struct hv_kvp_exchg_msg_value data; +}; + +struct hv_kvp_msg_delete { + __u32 key_size; + __u8 key[HV_KVP_EXCHANGE_MAX_KEY_SIZE]; +}; + +struct hv_kvp_register { + __u8 version[HV_KVP_EXCHANGE_MAX_KEY_SIZE]; +}; + struct hv_kvp_msg { struct hv_kvp_hdr kvp_hdr; union { - struct hv_kvp_msg_enumerate kvp_enum_data; - char kvp_version[HV_KVP_EXCHANGE_MAX_KEY_SIZE]; + struct hv_kvp_msg_get kvp_get; + struct hv_kvp_msg_set kvp_set; + struct hv_kvp_msg_delete kvp_delete; + struct hv_kvp_msg_enumerate kvp_enum_data; + struct hv_kvp_register kvp_register; } body; } __attribute__((packed)); -- cgit From fa3364b5a2d79b0c94a912b371c92bd3d06bc8fb Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Tue, 13 Mar 2012 01:04:47 +0100 Subject: USB: OHCI: Add a generic platform device driver This adds a generic driver for platform devices. It works like the PCI driver and is based on it. This is for devices which do not have an own bus but their OHCI controller works like a PCI controller. It will be used for the Broadcom bcma and ssb USB OHCI controller. Acked-by: Alan Stern Signed-off-by: Hauke Mehrtens Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/ohci_pdriver.h | 38 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) create mode 100644 include/linux/usb/ohci_pdriver.h (limited to 'include/linux') diff --git a/include/linux/usb/ohci_pdriver.h b/include/linux/usb/ohci_pdriver.h new file mode 100644 index 000000000000..2808f2a9cce8 --- /dev/null +++ b/include/linux/usb/ohci_pdriver.h @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2012 Hauke Mehrtens + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __USB_CORE_OHCI_PDRIVER_H +#define __USB_CORE_OHCI_PDRIVER_H + +/** + * struct usb_ohci_pdata - platform_data for generic ohci driver + * + * @big_endian_desc: BE descriptors + * @big_endian_mmio: BE registers + * @no_big_frame_no: no big endian frame_no shift + * + * These are general configuration options for the OHCI controller. All of + * these options are activating more or less workarounds for some hardware. + */ +struct usb_ohci_pdata { + unsigned big_endian_desc:1; + unsigned big_endian_mmio:1; + unsigned no_big_frame_no:1; +}; + +#endif /* __USB_CORE_OHCI_PDRIVER_H */ -- cgit From 7a7a4a592f42d9abf3b6cc40620b3f79fef49246 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Tue, 13 Mar 2012 01:04:48 +0100 Subject: USB: EHCI: Add a generic platform device driver This adds a generic driver for platform devices. It works like the PCI driver and is based on it. This is for devices which do not have an own bus but their EHCI controller works like a PCI controller. It will be used for the Broadcom bcma and ssb USB EHCI controller. Acked-by: Alan Stern Signed-off-by: Hauke Mehrtens Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/ehci_pdriver.h | 46 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 include/linux/usb/ehci_pdriver.h (limited to 'include/linux') diff --git a/include/linux/usb/ehci_pdriver.h b/include/linux/usb/ehci_pdriver.h new file mode 100644 index 000000000000..1894f42fe3f7 --- /dev/null +++ b/include/linux/usb/ehci_pdriver.h @@ -0,0 +1,46 @@ +/* + * Copyright (C) 2012 Hauke Mehrtens + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __USB_CORE_EHCI_PDRIVER_H +#define __USB_CORE_EHCI_PDRIVER_H + +/** + * struct usb_ehci_pdata - platform_data for generic ehci driver + * + * @caps_offset: offset of the EHCI Capability Registers to the start of + * the io memory region provided to the driver. + * @has_tt: set to 1 if TT is integrated in root hub. + * @port_power_on: set to 1 if the controller needs a power up after + * initialization. + * @port_power_off: set to 1 if the controller needs to be powered down + * after initialization. + * + * These are general configuration options for the EHCI controller. All of + * these options are activating more or less workarounds for some hardware. + */ +struct usb_ehci_pdata { + int caps_offset; + unsigned has_tt:1; + unsigned has_synopsys_hc_bug:1; + unsigned big_endian_desc:1; + unsigned big_endian_mmio:1; + unsigned port_power_on:1; + unsigned port_power_off:1; +}; + +#endif /* __USB_CORE_EHCI_PDRIVER_H */ -- cgit From f910381a55cdaa097030291f272f6e6e4380c39a Mon Sep 17 00:00:00 2001 From: Sasha Levin Date: Thu, 15 Mar 2012 12:36:13 -0400 Subject: math: Introduce div64_long Add a div64_long macro which is used to devide a 64bit number by a long (which can be 4 bytes on 32bit systems and 8 bytes on 64bit systems). Suggested-by: Thomas Gleixner Signed-off-by: Sasha Levin Cc: johnstul@us.ibm.com Link: http://lkml.kernel.org/r/1331829374-31543-1-git-send-email-levinsasha928@gmail.com Signed-off-by: Thomas Gleixner --- include/linux/math64.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/math64.h b/include/linux/math64.h index 23fcdfcba81b..b8ba85544721 100644 --- a/include/linux/math64.h +++ b/include/linux/math64.h @@ -6,6 +6,8 @@ #if BITS_PER_LONG == 64 +#define div64_long(x,y) div64_s64((x),(y)) + /** * div_u64_rem - unsigned 64bit divide with 32bit divisor with remainder * @@ -45,6 +47,8 @@ static inline s64 div64_s64(s64 dividend, s64 divisor) #elif BITS_PER_LONG == 32 +#define div64_long(x,y) div_s64((x),(y)) + #ifndef div_u64_rem static inline u64 div_u64_rem(u64 dividend, u32 divisor, u32 *remainder) { -- cgit From fa3d5b85c681518b6e4ec515814dcb2d5b702b89 Mon Sep 17 00:00:00 2001 From: "K. Y. Srinivasan" Date: Fri, 16 Mar 2012 08:02:25 -0700 Subject: Drivers: hv: Support the newly introduced KVP messages in the driver Support the newly defined KVP message types. It turns out that the host pushes a set of standard key value pairs as soon as the guest opens the KVP channel. Since we cannot handle these tuples until the user level daemon loads up, defer reading the KVP channel until the user level daemon is launched. Signed-off-by: K. Y. Srinivasan Reviewed-by: Haiyang Zhang Reviewed-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman --- include/linux/hyperv.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index a2d8c547f91b..e88a979107b5 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -119,6 +119,8 @@ */ #define REG_SZ 1 +#define REG_U32 4 +#define REG_U64 8 enum hv_kvp_exchg_op { KVP_OP_GET = 0, -- cgit From adc80ae60eae24a43a357bf5b30fb496f34aa605 Mon Sep 17 00:00:00 2001 From: "K. Y. Srinivasan" Date: Fri, 16 Mar 2012 08:02:27 -0700 Subject: Tools: hv: Support enumeration from all the pools We have only supported enumeration only from the AUTO pool. Now support enumeration from all the available pools. Signed-off-by: K. Y. Srinivasan Reviewed-by: Haiyang Zhang Reviewed-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman --- include/linux/hyperv.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index e88a979107b5..5852545e6bba 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -952,6 +952,7 @@ void vmbus_driver_unregister(struct hv_driver *hv_driver); #define HV_S_OK 0x00000000 #define HV_E_FAIL 0x80004005 +#define HV_S_CONT 0x80070103 #define HV_ERROR_NOT_SUPPORTED 0x80070032 #define HV_ERROR_MACHINE_LOCKED 0x800704F7 -- cgit From 124d37e9f088a8f56494b0264d63d22555f53fef Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Thu, 15 Mar 2012 05:25:58 +0000 Subject: arp: allow arp processing to honor per interface arp_accept sysctl I found recently that the arp_process function which handles all of our received arp frames, is using IPV4_DEVCONF_ALL macro to check the state of the arp_process flag. This seems wrong, as it implies that either none or all of the network interfaces accept gratuitous arps. This patch corrects that, allowing per-interface arp_accept configuration to deviate from the all setting. Note this also brings us into line with the way the arp_filter setting is handled during arp_process execution. Tested this myself on my home network, and confirmed it works as expected. Signed-off-by: Neil Horman CC: "David S. Miller" Signed-off-by: David S. Miller --- include/linux/inetdevice.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/inetdevice.h b/include/linux/inetdevice.h index 5f8146695b7f..597f4a9f3240 100644 --- a/include/linux/inetdevice.h +++ b/include/linux/inetdevice.h @@ -139,6 +139,7 @@ static inline void ipv4_devconf_setall(struct in_device *in_dev) IN_DEV_ORCONF((in_dev), ACCEPT_REDIRECTS))) #define IN_DEV_ARPFILTER(in_dev) IN_DEV_ORCONF((in_dev), ARPFILTER) +#define IN_DEV_ARP_ACCEPT(in_dev) IN_DEV_ORCONF((in_dev), ARP_ACCEPT) #define IN_DEV_ARP_ANNOUNCE(in_dev) IN_DEV_MAXCONF((in_dev), ARP_ANNOUNCE) #define IN_DEV_ARP_IGNORE(in_dev) IN_DEV_MAXCONF((in_dev), ARP_IGNORE) #define IN_DEV_ARP_NOTIFY(in_dev) IN_DEV_MAXCONF((in_dev), ARP_NOTIFY) -- cgit From c8628155ece363487b57d33441ea0359018c0fa7 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sun, 18 Mar 2012 11:07:47 +0000 Subject: tcp: reduce out_of_order memory use MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit With increasing receive window sizes, but speed of light not improved that much, out of order queue can contain a huge number of skbs, waiting to be moved to receive_queue when missing packets can fill the holes. Some devices happen to use fat skbs (truesize of 4096 + sizeof(struct sk_buff)) to store regular (MTU <= 1500) frames. This makes highly probable sk_rmem_alloc hits sk_rcvbuf limit, which can be 4Mbytes in many cases. When limit is hit, tcp stack calls tcp_collapse_ofo_queue(), a true latency killer and cpu cache blower. Doing the coalescing attempt each time we add a frame in ofo queue permits to keep memory use tight and in many cases avoid the tcp_collapse() thing later. Tested on various wireless setups (b43, ath9k, ...) known to use big skb truesize, this patch removed the "packets collapsed in receive queue due to low socket buffer" I had before. This also reduced average memory used by tcp sockets. With help from Neal Cardwell. Signed-off-by: Eric Dumazet Cc: Neal Cardwell Cc: Yuchung Cheng Cc: H.K. Jerry Chu Cc: Tom Herbert Cc: Ilpo Järvinen Acked-by: Neal Cardwell Signed-off-by: David S. Miller --- include/linux/snmp.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/snmp.h b/include/linux/snmp.h index 8ee8af4e6da9..2e68f5ba0389 100644 --- a/include/linux/snmp.h +++ b/include/linux/snmp.h @@ -233,6 +233,7 @@ enum LINUX_MIB_TCPREQQFULLDOCOOKIES, /* TCPReqQFullDoCookies */ LINUX_MIB_TCPREQQFULLDROP, /* TCPReqQFullDrop */ LINUX_MIB_TCPRETRANSFAIL, /* TCPRetransFail */ + LINUX_MIB_TCPRCVCOALESCE, /* TCPRcvCoalesce */ __LINUX_MIB_MAX }; -- cgit From a3f671b3152919e72af261333402c0f1272bdf59 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Sun, 18 Mar 2012 17:37:56 +0000 Subject: if_vlan: Remove VLAN_ETH_ALEN define and the 1 use of it Just use ETH_ALEN. Signed-off-by: Joe Perches Signed-off-by: David S. Miller --- include/linux/if_vlan.h | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/if_vlan.h b/include/linux/if_vlan.h index 13aff1e2183b..33a6e1951d4d 100644 --- a/include/linux/if_vlan.h +++ b/include/linux/if_vlan.h @@ -18,10 +18,9 @@ #include #include -#define VLAN_HLEN 4 /* The additional bytes (on top of the Ethernet header) - * that VLAN requires. +#define VLAN_HLEN 4 /* The additional bytes required by VLAN + * (in addition to the Ethernet header) */ -#define VLAN_ETH_ALEN 6 /* Octets in one ethernet addr */ #define VLAN_ETH_HLEN 18 /* Total octets in header. */ #define VLAN_ETH_ZLEN 64 /* Min. octets in frame sans FCS */ @@ -177,7 +176,7 @@ static inline struct sk_buff *vlan_insert_tag(struct sk_buff *skb, u16 vlan_tci) veth = (struct vlan_ethhdr *)skb_push(skb, VLAN_HLEN); /* Move the mac addresses to the beginning of the new header. */ - memmove(skb->data, skb->data + VLAN_HLEN, 2 * VLAN_ETH_ALEN); + memmove(skb->data, skb->data + VLAN_HLEN, 2 * ETH_ALEN); skb->mac_header -= VLAN_HLEN; /* first, the ethernet type */ -- cgit From cdbee74ce74cd66de42a6f6d0edfa74fa9a66f2a Mon Sep 17 00:00:00 2001 From: Yi Zou Date: Fri, 16 Mar 2012 23:08:11 +0000 Subject: net: do not do gso for CHECKSUM_UNNECESSARY in netif_needs_gso This is related to fixing the bug of dropping FCoE frames when disabling tx ip checksum by 'ethtool -K ethx tx off'. The FCoE protocol stack driver would use CHECKSUM_UNNECESSARY on tx path instead of CHECKSUM_PARTIAL (as indicated in the 2/2 of this series). To do so, netif_needs_gso() has to be changed here to not do gso for both CHECKSUM_PARTIAL and CHECKSUM_UNNECESSARY. Ref. to original discussion thread: http://patchwork.ozlabs.org/patch/146567/ Signed-off-by: Yi Zou Tested-by: Ross Brattain Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- include/linux/netdevice.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 4535a4ea9760..261067b94559 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2657,7 +2657,8 @@ static inline bool netif_needs_gso(struct sk_buff *skb, netdev_features_t features) { return skb_is_gso(skb) && (!skb_gso_ok(skb, features) || - unlikely(skb->ip_summed != CHECKSUM_PARTIAL)); + unlikely((skb->ip_summed != CHECKSUM_PARTIAL) && + (skb->ip_summed != CHECKSUM_UNNECESSARY))); } static inline void netif_set_gso_max_size(struct net_device *dev, -- cgit From 3af79302b400e05b45e377993a8870869500466b Mon Sep 17 00:00:00 2001 From: Yi Zou Date: Mon, 19 Mar 2012 11:12:41 +0000 Subject: net: update the usage of CHECKSUM_UNNECESSARY As suggested by Ben, this adds the clarification on the usage of CHECKSUM_UNNECESSARY on the outgoing patch. Also add the usage description of NETIF_F_FCOE_CRC and CHECKSUM_UNNECESSARY for the kernel FCoE protocol driver. This is a follow-up to the following: http://patchwork.ozlabs.org/patch/147315/ Signed-off-by: Yi Zou Cc: Ben Hutchings Cc: Jeff Kirsher Cc: www.Open-FCoE.org Signed-off-by: David S. Miller --- include/linux/skbuff.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 8dc8257eab8b..a2b9953b582d 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -94,6 +94,13 @@ * about CHECKSUM_UNNECESSARY. 8) * NETIF_F_IPV6_CSUM about as dumb as the last one but does IPv6 instead. * + * UNNECESSARY: device will do per protocol specific csum. Protocol drivers + * that do not want net to perform the checksum calculation should use + * this flag in their outgoing skbs. + * NETIF_F_FCOE_CRC this indicates the device can do FCoE FC CRC + * offload. Correspondingly, the FCoE protocol driver + * stack should use CHECKSUM_UNNECESSARY. + * * Any questions? No questions, good. --ANK */ -- cgit From df828598a755732e717b0adca82f884e44d37576 Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Sun, 18 Mar 2012 20:17:54 +0000 Subject: netdev: driver: ethernet: Add TI CPSW driver This patch adds support for TI's CPSW driver. The three port switch gigabit ethernet subsystem provides ethernet packet communication and can be configured as an ethernet switch. Supports 10/100/1000 Mbps. Signed-off-by: Cyril Chemparathy Signed-off-by: Sriramakrishnan A G Signed-off-by: Mugunthan V N Signed-off-by: David S. Miller --- include/linux/platform_data/cpsw.h | 55 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 55 insertions(+) create mode 100644 include/linux/platform_data/cpsw.h (limited to 'include/linux') diff --git a/include/linux/platform_data/cpsw.h b/include/linux/platform_data/cpsw.h new file mode 100644 index 000000000000..c4e23d029498 --- /dev/null +++ b/include/linux/platform_data/cpsw.h @@ -0,0 +1,55 @@ +/* + * Texas Instruments Ethernet Switch Driver + * + * Copyright (C) 2012 Texas Instruments + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef __CPSW_H__ +#define __CPSW_H__ + +#include + +struct cpsw_slave_data { + u32 slave_reg_ofs; + u32 sliver_reg_ofs; + const char *phy_id; + int phy_if; + u8 mac_addr[ETH_ALEN]; +}; + +struct cpsw_platform_data { + u32 ss_reg_ofs; /* Subsystem control register offset */ + u32 channels; /* number of cpdma channels (symmetric) */ + u32 cpdma_reg_ofs; /* cpdma register offset */ + u32 cpdma_sram_ofs; /* cpdma sram offset */ + + u32 slaves; /* number of slave cpgmac ports */ + struct cpsw_slave_data *slave_data; + + u32 ale_reg_ofs; /* address lookup engine reg offset */ + u32 ale_entries; /* ale table size */ + + u32 host_port_reg_ofs; /* cpsw cpdma host port registers */ + u32 host_port_num; /* The port number for the host port */ + + u32 hw_stats_reg_ofs; /* cpsw hardware statistics counters */ + + u32 bd_ram_ofs; /* embedded buffer descriptor RAM offset*/ + u32 bd_ram_size; /*buffer descriptor ram size */ + u32 hw_ram_addr; /*if the HW address for BD RAM is different */ + bool no_bd_ram; /* no embedded BD ram*/ + + u32 rx_descs; /* Number of Rx Descriptios */ + + u32 mac_control; /* Mac control register */ +}; + +#endif /* __CPSW_H__ */ -- cgit From bf362f750bea1372aff3b5c405b50560a1b28981 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 19 Mar 2012 00:01:09 +0000 Subject: constify struct pci_dev * in obvious cases Signed-off-by: Al Viro Signed-off-by: Jiri Kosina --- include/linux/pci.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index a16b1df3deff..766afe93d5d3 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -746,28 +746,28 @@ int pci_bus_write_config_dword(struct pci_bus *bus, unsigned int devfn, int where, u32 val); struct pci_ops *pci_bus_set_ops(struct pci_bus *bus, struct pci_ops *ops); -static inline int pci_read_config_byte(struct pci_dev *dev, int where, u8 *val) +static inline int pci_read_config_byte(const struct pci_dev *dev, int where, u8 *val) { return pci_bus_read_config_byte(dev->bus, dev->devfn, where, val); } -static inline int pci_read_config_word(struct pci_dev *dev, int where, u16 *val) +static inline int pci_read_config_word(const struct pci_dev *dev, int where, u16 *val) { return pci_bus_read_config_word(dev->bus, dev->devfn, where, val); } -static inline int pci_read_config_dword(struct pci_dev *dev, int where, +static inline int pci_read_config_dword(const struct pci_dev *dev, int where, u32 *val) { return pci_bus_read_config_dword(dev->bus, dev->devfn, where, val); } -static inline int pci_write_config_byte(struct pci_dev *dev, int where, u8 val) +static inline int pci_write_config_byte(const struct pci_dev *dev, int where, u8 val) { return pci_bus_write_config_byte(dev->bus, dev->devfn, where, val); } -static inline int pci_write_config_word(struct pci_dev *dev, int where, u16 val) +static inline int pci_write_config_word(const struct pci_dev *dev, int where, u16 val) { return pci_bus_write_config_word(dev->bus, dev->devfn, where, val); } -static inline int pci_write_config_dword(struct pci_dev *dev, int where, +static inline int pci_write_config_dword(const struct pci_dev *dev, int where, u32 val) { return pci_bus_write_config_dword(dev->bus, dev->devfn, where, val); -- cgit