Merge tag 'input-for-v6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:

 - a brand new driver for touchpads and touchbars in newer Apple devices

 - support for Berlin-A series in goodix-berlin touchscreen driver

 - improvements to matrix_keypad driver to better handle GPIOs toggling

 - assorted small cleanups in other input drivers

* tag 'input-for-v6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: goodix_berlin - add support for Berlin-A series
  dt-bindings: input: goodix,gt9916: Document gt9897 compatible
  dt-bindings: input: matrix_keypad - add wakeup-source property
  dt-bindings: input: matrix_keypad - add missing property
  Input: pm8941-pwrkey - fix dev_dbg() output in pm8941_pwrkey_irq()
  Input: synaptics - hide unused smbus_pnp_ids[] array
  Input: apple_z2 - fix potential confusion in Kconfig
  Input: matrix_keypad - use fsleep for delays after activating columns
  Input: matrix_keypad - add settle time after enabling all columns
  dt-bindings: input: matrix_keypad: add settle time after enabling all columns
  dt-bindings: input: matrix_keypad: convert to YAML
  dt-bindings: input: Correct indentation and style in DTS example
  MAINTAINERS: Add entries for Apple Z2 touchscreen driver
  Input: apple_z2 - add a driver for Apple Z2 touchscreens
  dt-bindings: input: touchscreen: Add Z2 controller
  Input: Switch to use hrtimer_setup()
  Input: drop vb2_ops_wait_prepare/finish

24 files changed, 814 insertions, 150 deletions

diff --git a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
deleted file mode 100644
index 570dc10f0cd7..000000000000
--- a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* GPIO driven matrix keypad device tree bindings
-
-GPIO driven matrix keypad is used to interface a SoC with a matrix keypad.
-The matrix keypad supports multiple row and column lines, a key can be
-placed at each intersection of a unique row and a unique column. The matrix
-keypad can sense a key-press and key-release by means of GPIO lines and
-report the event using GPIO interrupts to the cpu.
-
-Required Properties:
-- compatible:		Should be "gpio-matrix-keypad"
-- row-gpios:		List of gpios used as row lines. The gpio specifier
-			for this property depends on the gpio controller to
-			which these row lines are connected.
-- col-gpios:		List of gpios used as column lines. The gpio specifier
-			for this property depends on the gpio controller to
-			which these column lines are connected.
-- linux,keymap:		The definition can be found at
-			bindings/input/matrix-keymap.txt
-
-Optional Properties:
-- linux,no-autorepeat:	do no enable autorepeat feature.
-- wakeup-source:	use any event on keypad as wakeup event.
-			(Legacy property supported: "linux,wakeup")
-- debounce-delay-ms:	debounce interval in milliseconds
-- col-scan-delay-us:	delay, measured in microseconds, that is needed
-			before we can scan keypad after activating column gpio
-- drive-inactive-cols:	drive inactive columns during scan,
-			default is to turn inactive columns into inputs.
-
-Example:
-	matrix-keypad {
-		compatible = "gpio-matrix-keypad";
-		debounce-delay-ms = <5>;
-		col-scan-delay-us = <2>;
-
-		row-gpios = <&gpio2 25 0
-			     &gpio2 26 0
-			     &gpio2 27 0>;
-
-		col-gpios = <&gpio2 21 0
-			     &gpio2 22 0>;
-
-		linux,keymap = <0x0000008B
-				0x0100009E
-				0x02000069
-				0x0001006A
-				0x0101001C
-				0x0201006C>;
-	};
diff --git a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.yaml b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.yaml
new file mode 100644
index 000000000000..ebfff9e42a36
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/input/gpio-matrix-keypad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO matrix keypad
+
+maintainers:
+  - Marek Vasut <marek.vasut@gmail.com>
+
+description:
+  GPIO driven matrix keypad is used to interface a SoC with a matrix keypad.
+  The matrix keypad supports multiple row and column lines, a key can be
+  placed at each intersection of a unique row and a unique column. The matrix
+  keypad can sense a key-press and key-release by means of GPIO lines and
+  report the event using GPIO interrupts to the cpu.
+
+allOf:
+  - $ref: /schemas/input/matrix-keymap.yaml#
+
+properties:
+  compatible:
+    const: gpio-matrix-keypad
+
+  row-gpios:
+    description:
+      List of GPIOs used as row lines. The gpio specifier for this property
+      depends on the gpio controller to which these row lines are connected.
+
+  col-gpios:
+    description:
+      List of GPIOs used as column lines. The gpio specifier for this property
+      depends on the gpio controller to which these column lines are connected.
+
+  linux,keymap: true
+
+  linux,no-autorepeat:
+    type: boolean
+    description: Do not enable autorepeat feature.
+
+  gpio-activelow:
+    type: boolean
+    description:
+      Force GPIO polarity to active low.
+      In the absence of this property GPIOs are treated as active high.
+
+  debounce-delay-ms:
+    description: Debounce interval in milliseconds.
+    default: 0
+
+  col-scan-delay-us:
+    description:
+      Delay, measured in microseconds, that is needed
+      before we can scan keypad after activating column gpio.
+    default: 0
+
+  all-cols-on-delay-us:
+    description:
+      Delay, measured in microseconds, that is needed
+      after activating all column gpios.
+    default: 0
+
+  drive-inactive-cols:
+    type: boolean
+    description:
+      Drive inactive columns during scan,
+      default is to turn inactive columns into inputs.
+
+  wakeup-source: true
+
+required:
+  - compatible
+  - row-gpios
+  - col-gpios
+  - linux,keymap
+
+additionalProperties: false
+
+examples:
+  - |
+    matrix-keypad {
+        compatible = "gpio-matrix-keypad";
+        debounce-delay-ms = <5>;
+        col-scan-delay-us = <2>;
+
+        row-gpios = <&gpio2 25 0
+                     &gpio2 26 0
+                     &gpio2 27 0>;
+
+        col-gpios = <&gpio2 21 0
+                     &gpio2 22 0>;
+
+        linux,keymap = <0x0000008B
+                        0x0100009E
+                        0x02000069
+                        0x0001006A
+                        0x0101001C
+                        0x0201006C>;
+
+        wakeup-source;
+    };
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8921-keypad.yaml b/Documentation/devicetree/bindings/input/qcom,pm8921-keypad.yaml
index 88764adcd696..e03611eef93d 100644
--- a/Documentation/devicetree/bindings/input/qcom,pm8921-keypad.yaml
+++ b/Documentation/devicetree/bindings/input/qcom,pm8921-keypad.yaml
@@ -62,28 +62,28 @@ unevaluatedProperties: false
 
 examples:
   - |
-   #include <dt-bindings/input/input.h>
-   #include <dt-bindings/interrupt-controller/irq.h>
-   pmic {
-       #address-cells = <1>;
-       #size-cells = <0>;
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
 
-       keypad@148 {
-           compatible = "qcom,pm8921-keypad";
-           reg = <0x148>;
-           interrupt-parent = <&pmicintc>;
-           interrupts = <74 IRQ_TYPE_EDGE_RISING>, <75 IRQ_TYPE_EDGE_RISING>;
-           linux,keymap = <
-               MATRIX_KEY(0, 0, KEY_VOLUMEUP)
-               MATRIX_KEY(0, 1, KEY_VOLUMEDOWN)
-               MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS)
-               MATRIX_KEY(0, 3, KEY_CAMERA)
-           >;
-           keypad,num-rows = <1>;
-           keypad,num-columns = <5>;
-           debounce = <15>;
-           scan-delay = <32>;
-           row-hold = <91500>;
-       };
-   };
+        keypad@148 {
+            compatible = "qcom,pm8921-keypad";
+            reg = <0x148>;
+            interrupt-parent = <&pmicintc>;
+            interrupts = <74 IRQ_TYPE_EDGE_RISING>, <75 IRQ_TYPE_EDGE_RISING>;
+            linux,keymap = <
+                MATRIX_KEY(0, 0, KEY_VOLUMEUP)
+                MATRIX_KEY(0, 1, KEY_VOLUMEDOWN)
+                MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS)
+                MATRIX_KEY(0, 3, KEY_CAMERA)
+            >;
+            keypad,num-rows = <1>;
+            keypad,num-columns = <5>;
+            debounce = <15>;
+            scan-delay = <32>;
+            row-hold = <91500>;
+        };
+    };
 ...
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8921-pwrkey.yaml b/Documentation/devicetree/bindings/input/qcom,pm8921-pwrkey.yaml
index 12c74c083258..64590894857a 100644
--- a/Documentation/devicetree/bindings/input/qcom,pm8921-pwrkey.yaml
+++ b/Documentation/devicetree/bindings/input/qcom,pm8921-pwrkey.yaml
@@ -52,24 +52,24 @@ unevaluatedProperties: false
 
 examples:
   - |
-   #include <dt-bindings/interrupt-controller/irq.h>
-   ssbi {
-     #address-cells = <1>;
-     #size-cells = <0>;
+    #include <dt-bindings/interrupt-controller/irq.h>
+    ssbi {
+        #address-cells = <1>;
+        #size-cells = <0>;
 
-     pmic@0 {
-       reg = <0x0>;
-       #address-cells = <1>;
-       #size-cells = <0>;
+        pmic@0 {
+            reg = <0x0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
 
-       pwrkey@1c {
-         compatible = "qcom,pm8921-pwrkey";
-         reg = <0x1c>;
-         interrupt-parent = <&pmicint>;
-         interrupts = <50 IRQ_TYPE_EDGE_RISING>, <51 IRQ_TYPE_EDGE_RISING>;
-         debounce = <15625>;
-         pull-up;
-       };
-     };
-   };
+            pwrkey@1c {
+                compatible = "qcom,pm8921-pwrkey";
+                reg = <0x1c>;
+                interrupt-parent = <&pmicint>;
+                interrupts = <50 IRQ_TYPE_EDGE_RISING>, <51 IRQ_TYPE_EDGE_RISING>;
+                debounce = <15625>;
+                pull-up;
+            };
+        };
+    };
 ...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/apple,z2-multitouch.yaml b/Documentation/devicetree/bindings/input/touchscreen/apple,z2-multitouch.yaml
new file mode 100644
index 000000000000..402ca6bffd34
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/apple,z2-multitouch.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/apple,z2-multitouch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple touchscreens attached using the Z2 protocol
+
+maintainers:
+  - Sasha Finkelstein <fnkl.kernel@gmail.com>
+
+description: A series of touschscreen controllers used in Apple products
+
+allOf:
+  - $ref: touchscreen.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - apple,j293-touchbar
+      - apple,j493-touchbar
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  firmware-name:
+    maxItems: 1
+
+  apple,z2-cal-blob:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    maxItems: 4096
+    description:
+      Calibration blob supplied by the bootloader
+
+required:
+  - compatible
+  - interrupts
+  - reset-gpios
+  - firmware-name
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@0 {
+            compatible = "apple,j293-touchbar";
+            reg = <0>;
+            spi-max-frequency = <11500000>;
+            reset-gpios = <&pinctrl_ap 139 GPIO_ACTIVE_LOW>;
+            interrupts-extended = <&pinctrl_ap 194 IRQ_TYPE_EDGE_FALLING>;
+            firmware-name = "apple/dfrmtfw-j293.bin";
+            touchscreen-size-x = <23045>;
+            touchscreen-size-y = <640>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix,gt9916.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix,gt9916.yaml
index d90f045ac06c..c40d92b7f4af 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/goodix,gt9916.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/goodix,gt9916.yaml
@@ -19,6 +19,7 @@ allOf:
 properties:
   compatible:
     enum:
+      - goodix,gt9897
       - goodix,gt9916
 
   reg:
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti,ads7843.yaml b/Documentation/devicetree/bindings/input/touchscreen/ti,ads7843.yaml
index 604921733d2c..8f6335d7da1c 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/ti,ads7843.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/ti,ads7843.yaml
@@ -164,20 +164,20 @@ examples:
         #size-cells = <0>;
 
         touchscreen@0 {
-           compatible = "ti,tsc2046";
-           reg = <0>;	/* CS0 */
-           interrupt-parent = <&gpio1>;
-           interrupts = <8 0>;	/* BOOT6 / GPIO 8 */
-           pendown-gpio = <&gpio1 8 0>;
-           spi-max-frequency = <1000000>;
-           vcc-supply = <&reg_vcc3>;
-           wakeup-source;
-
-           ti,pressure-max = /bits/ 16 <255>;
-           ti,x-max = /bits/ 16 <8000>;
-           ti,x-min = /bits/ 16 <0>;
-           ti,x-plate-ohms = /bits/ 16 <40>;
-           ti,y-max = /bits/ 16 <4800>;
-           ti,y-min = /bits/ 16 <0>;
-       };
+            compatible = "ti,tsc2046";
+            reg = <0>;	/* CS0 */
+            interrupt-parent = <&gpio1>;
+            interrupts = <8 0>;	/* BOOT6 / GPIO 8 */
+            pendown-gpio = <&gpio1 8 0>;
+            spi-max-frequency = <1000000>;
+            vcc-supply = <&reg_vcc3>;
+            wakeup-source;
+
+            ti,pressure-max = /bits/ 16 <255>;
+            ti,x-max = /bits/ 16 <8000>;
+            ti,x-min = /bits/ 16 <0>;
+            ti,x-plate-ohms = /bits/ 16 <40>;
+            ti,y-max = /bits/ 16 <4800>;
+            ti,y-min = /bits/ 16 <0>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/power/wakeup-source.txt b/Documentation/devicetree/bindings/power/wakeup-source.txt
index 27f1797be963..66bb016305f9 100644
--- a/Documentation/devicetree/bindings/power/wakeup-source.txt
+++ b/Documentation/devicetree/bindings/power/wakeup-source.txt
@@ -23,7 +23,7 @@ List of legacy properties and respective binding document
 
 1. "gpio-key,wakeup"		Documentation/devicetree/bindings/input/gpio-keys{,-polled}.txt
 2. "has-tpo"			Documentation/devicetree/bindings/rtc/rtc-opal.txt
-3. "linux,wakeup"		Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
+3. "linux,wakeup"		Documentation/devicetree/bindings/input/gpio-matrix-keypad.yaml
 				Documentation/devicetree/bindings/mfd/tc3589x.txt
 				Documentation/devicetree/bindings/input/touchscreen/ti,ads7843.yaml
 4. "linux,keypad-wakeup"	Documentation/devicetree/bindings/input/qcom,pm8921-keypad.yaml
diff --git a/MAINTAINERS b/MAINTAINERS
index 3241c8d2b258..349ec6815ff7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2268,6 +2268,7 @@ F:	Documentation/devicetree/bindings/clock/apple,nco.yaml
 F:	Documentation/devicetree/bindings/cpufreq/apple,cluster-cpufreq.yaml
 F:	Documentation/devicetree/bindings/dma/apple,admac.yaml
 F:	Documentation/devicetree/bindings/i2c/apple,i2c.yaml
+F:	Documentation/devicetree/bindings/input/touchscreen/apple,z2-multitouch.yaml
 F:	Documentation/devicetree/bindings/interrupt-controller/apple,*
 F:	Documentation/devicetree/bindings/iommu/apple,dart.yaml
 F:	Documentation/devicetree/bindings/iommu/apple,sart.yaml
@@ -2290,6 +2291,7 @@ F:	drivers/dma/apple-admac.c
 F:	drivers/pmdomain/apple/
 F:	drivers/i2c/busses/i2c-pasemi-core.c
 F:	drivers/i2c/busses/i2c-pasemi-platform.c
+F:	drivers/input/touchscreen/apple_z2.c
 F:	drivers/iommu/apple-dart.c
 F:	drivers/iommu/io-pgtable-dart.c
 F:	drivers/irqchip/irq-apple-aic.c
diff --git a/drivers/input/joystick/walkera0701.c b/drivers/input/joystick/walkera0701.c
index 59eea813f258..15370fb82317 100644
--- a/drivers/input/joystick/walkera0701.c
+++ b/drivers/input/joystick/walkera0701.c
@@ -232,8 +232,7 @@ static void walkera0701_attach(struct parport *pp)
 		goto err_unregister_device;
 	}
 
-	hrtimer_init(&w->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
-	w->timer.function = timer_handler;
+	hrtimer_setup(&w->timer, timer_handler, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
 
 	w->input_dev = input_allocate_device();
 	if (!w->input_dev) {
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index 5eef66516e37..166cfc67d98b 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -590,9 +590,8 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
 
 		INIT_DELAYED_WORK(&bdata->work, gpio_keys_gpio_work_func);
 
-		hrtimer_init(&bdata->debounce_timer,
-			     CLOCK_REALTIME, HRTIMER_MODE_REL);
-		bdata->debounce_timer.function = gpio_keys_debounce_timer;
+		hrtimer_setup(&bdata->debounce_timer, gpio_keys_debounce_timer, CLOCK_REALTIME,
+			      HRTIMER_MODE_REL);
 
 		isr = gpio_keys_gpio_isr;
 		irqflags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING;
@@ -628,9 +627,8 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
 		}
 
 		bdata->release_delay = button->debounce_interval;
-		hrtimer_init(&bdata->release_timer,
-			     CLOCK_REALTIME, HRTIMER_MODE_REL_HARD);
-		bdata->release_timer.function = gpio_keys_irq_timer;
+		hrtimer_setup(&bdata->release_timer, gpio_keys_irq_timer, CLOCK_REALTIME,
+			      HRTIMER_MODE_REL_HARD);
 
 		isr = gpio_keys_irq_isr;
 		irqflags = 0;
diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c
index 2a3b3bfc2878..e46473cb817c 100644
--- a/drivers/input/keyboard/matrix_keypad.c
+++ b/drivers/input/keyboard/matrix_keypad.c
@@ -26,6 +26,7 @@ struct matrix_keypad {
 	unsigned int row_shift;
 
 	unsigned int col_scan_delay_us;
+	unsigned int all_cols_on_delay_us;
 	/* key debounce interval in milli-second */
 	unsigned int debounce_ms;
 	bool drive_inactive_cols;
@@ -68,7 +69,7 @@ static void activate_col(struct matrix_keypad *keypad, int col, bool on)
 	__activate_col(keypad, col, on);
 
 	if (on && keypad->col_scan_delay_us)
-		udelay(keypad->col_scan_delay_us);
+		fsleep(keypad->col_scan_delay_us);
 }
 
 static void activate_all_cols(struct matrix_keypad *keypad, bool on)
@@ -77,6 +78,9 @@ static void activate_all_cols(struct matrix_keypad *keypad, bool on)
 
 	for (col = 0; col < keypad->num_col_gpios; col++)
 		__activate_col(keypad, col, on);
+
+	if (on && keypad->all_cols_on_delay_us)
+		fsleep(keypad->all_cols_on_delay_us);
 }
 
 static bool row_asserted(struct matrix_keypad *keypad, int row)
@@ -392,6 +396,8 @@ static int matrix_keypad_probe(struct platform_device *pdev)
 				 &keypad->debounce_ms);
 	device_property_read_u32(&pdev->dev, "col-scan-delay-us",
 				 &keypad->col_scan_delay_us);
+	device_property_read_u32(&pdev->dev, "all-cols-on-delay-us",
+				 &keypad->all_cols_on_delay_us);
 
 	err = matrix_keypad_init_gpio(pdev, keypad);
 	if (err)
diff --git a/drivers/input/misc/pm8941-pwrkey.c b/drivers/input/misc/pm8941-pwrkey.c
index d0c46665e527..d952c16f2458 100644
--- a/drivers/input/misc/pm8941-pwrkey.c
+++ b/drivers/input/misc/pm8941-pwrkey.c
@@ -154,8 +154,8 @@ static irqreturn_t pm8941_pwrkey_irq(int irq, void *_data)
 	if (pwrkey->sw_debounce_time_us) {
 		if (ktime_before(ktime_get(), pwrkey->sw_debounce_end_time)) {
 			dev_dbg(pwrkey->dev,
-				"ignoring key event received before debounce end %llu us\n",
-				pwrkey->sw_debounce_end_time);
+				"ignoring key event received before debounce end %lld us\n",
+				ktime_to_us(pwrkey->sw_debounce_end_time));
 			return IRQ_HANDLED;
 		}
 	}
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index aba57abe6978..309c360aab55 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -161,6 +161,7 @@ static const char * const topbuttonpad_pnp_ids[] = {
 	NULL
 };
 
+#ifdef CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS
 static const char * const smbus_pnp_ids[] = {
 	/* all of the topbuttonpad_pnp_ids are valid, we just add some extras */
 	"LEN0048", /* X1 Carbon 3 */
@@ -196,6 +197,7 @@ static const char * const smbus_pnp_ids[] = {
 	"SYN3257", /* HP Envy 13-ad105ng */
 	NULL
 };
+#endif
 
 static const char * const forcepad_pnp_ids[] = {
 	"SYN300D",
diff --git a/drivers/input/rmi4/rmi_f54.c b/drivers/input/rmi4/rmi_f54.c
index 5c3da910b5b2..ac4041a69fcd 100644
--- a/drivers/input/rmi4/rmi_f54.c
+++ b/drivers/input/rmi4/rmi_f54.c
@@ -372,8 +372,6 @@ static const struct vb2_ops rmi_f54_queue_ops = {
 	.queue_setup            = rmi_f54_queue_setup,
 	.buf_queue              = rmi_f54_buffer_queue,
 	.stop_streaming		= rmi_f54_stop_streaming,
-	.wait_prepare           = vb2_ops_wait_prepare,
-	.wait_finish            = vb2_ops_wait_finish,
 };
 
 static const struct vb2_queue rmi_f54_queue = {
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 1a03de7fcfa6..91a2b584dab1 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -103,6 +103,19 @@ config TOUCHSCREEN_ADC
 	  To compile this driver as a module, choose M here: the
 	  module will be called resistive-adc-touch.ko.
 
+config TOUCHSCREEN_APPLE_Z2
+	tristate "Apple Z2 touchscreens"
+	default ARCH_APPLE
+	depends on SPI && (ARCH_APPLE || COMPILE_TEST)
+	help
+	  Say Y here if you have an ARM Apple device with
+	  a touchscreen or a touchbar.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called apple_z2.
+
 config TOUCHSCREEN_AR1021_I2C
 	tristate "Microchip AR1020/1021 i2c touchscreen"
 	depends on I2C && OF
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 82bc837ca01e..97a025c6a377 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_TOUCHSCREEN_AD7879_I2C)	+= ad7879-i2c.o
 obj-$(CONFIG_TOUCHSCREEN_AD7879_SPI)	+= ad7879-spi.o
 obj-$(CONFIG_TOUCHSCREEN_ADC)		+= resistive-adc-touch.o
 obj-$(CONFIG_TOUCHSCREEN_ADS7846)	+= ads7846.o
+obj-$(CONFIG_TOUCHSCREEN_APPLE_Z2)	+= apple_z2.o
 obj-$(CONFIG_TOUCHSCREEN_AR1021_I2C)	+= ar1021_i2c.o
 obj-$(CONFIG_TOUCHSCREEN_ATMEL_MXT)	+= atmel_mxt_ts.o
 obj-$(CONFIG_TOUCHSCREEN_AUO_PIXCIR)	+= auo-pixcir-ts.o
diff --git a/drivers/input/touchscreen/apple_z2.c b/drivers/input/touchscreen/apple_z2.c
new file mode 100644
index 000000000000..0de161eae59a
--- /dev/null
+++ b/drivers/input/touchscreen/apple_z2.c
@@ -0,0 +1,477 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Apple Z2 touchscreen driver
+ *
+ * Copyright (C) The Asahi Linux Contributors
+ */
+
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/spi/spi.h>
+#include <linux/unaligned.h>
+
+#define APPLE_Z2_NUM_FINGERS_OFFSET      16
+#define APPLE_Z2_FINGERS_OFFSET          24
+#define APPLE_Z2_TOUCH_STARTED           3
+#define APPLE_Z2_TOUCH_MOVED             4
+#define APPLE_Z2_CMD_READ_INTERRUPT_DATA 0xEB
+#define APPLE_Z2_HBPP_CMD_BLOB           0x3001
+#define APPLE_Z2_FW_MAGIC                0x5746325A
+#define LOAD_COMMAND_INIT_PAYLOAD        0
+#define LOAD_COMMAND_SEND_BLOB           1
+#define LOAD_COMMAND_SEND_CALIBRATION    2
+#define CAL_PROP_NAME                    "apple,z2-cal-blob"
+
+struct apple_z2 {
+	struct spi_device *spidev;
+	struct gpio_desc *reset_gpio;
+	struct input_dev *input_dev;
+	struct completion boot_irq;
+	bool booted;
+	int index_parity;
+	struct touchscreen_properties props;
+	const char *fw_name;
+	u8 *tx_buf;
+	u8 *rx_buf;
+};
+
+struct apple_z2_finger {
+	u8 finger;
+	u8 state;
+	__le16 unknown2;
+	__le16 abs_x;
+	__le16 abs_y;
+	__le16 rel_x;
+	__le16 rel_y;
+	__le16 tool_major;
+	__le16 tool_minor;
+	__le16 orientation;
+	__le16 touch_major;
+	__le16 touch_minor;
+	__le16 unused[2];
+	__le16 pressure;
+	__le16 multi;
+} __packed;
+
+struct apple_z2_hbpp_blob_hdr {
+	__le16 cmd;
+	__le16 len;
+	__le32 addr;
+	__le16 checksum;
+};
+
+struct apple_z2_fw_hdr {
+	__le32 magic;
+	__le32 version;
+};
+
+struct apple_z2_read_interrupt_cmd {
+	u8 cmd;
+	u8 counter;
+	u8 unused[12];
+	__le16 checksum;
+};
+
+static void apple_z2_parse_touches(struct apple_z2 *z2,
+				   const u8 *msg, size_t msg_len)
+{
+	int i;
+	int nfingers;
+	int slot;
+	int slot_valid;
+	struct apple_z2_finger *fingers;
+
+	if (msg_len <= APPLE_Z2_NUM_FINGERS_OFFSET)
+		return;
+	nfingers = msg[APPLE_Z2_NUM_FINGERS_OFFSET];
+	fingers = (struct apple_z2_finger *)(msg + APPLE_Z2_FINGERS_OFFSET);
+	for (i = 0; i < nfingers; i++) {
+		slot = input_mt_get_slot_by_key(z2->input_dev, fingers[i].finger);
+		if (slot < 0) {
+			dev_warn(&z2->spidev->dev, "unable to get slot for finger\n");
+			continue;
+		}
+		slot_valid = fingers[i].state == APPLE_Z2_TOUCH_STARTED ||
+			     fingers[i].state == APPLE_Z2_TOUCH_MOVED;
+		input_mt_slot(z2->input_dev, slot);
+		if (!input_mt_report_slot_state(z2->input_dev, MT_TOOL_FINGER, slot_valid))
+			continue;
+		touchscreen_report_pos(z2->input_dev, &z2->props,
+				       le16_to_cpu(fingers[i].abs_x),
+				       le16_to_cpu(fingers[i].abs_y),
+				       true);
+		input_report_abs(z2->input_dev, ABS_MT_WIDTH_MAJOR,
+				 le16_to_cpu(fingers[i].tool_major));
+		input_report_abs(z2->input_dev, ABS_MT_WIDTH_MINOR,
+				 le16_to_cpu(fingers[i].tool_minor));
+		input_report_abs(z2->input_dev, ABS_MT_ORIENTATION,
+				 le16_to_cpu(fingers[i].orientation));
+		input_report_abs(z2->input_dev, ABS_MT_TOUCH_MAJOR,
+				 le16_to_cpu(fingers[i].touch_major));
+		input_report_abs(z2->input_dev, ABS_MT_TOUCH_MINOR,
+				 le16_to_cpu(fingers[i].touch_minor));
+	}
+	input_mt_sync_frame(z2->input_dev);
+	input_sync(z2->input_dev);
+}
+
+static int apple_z2_read_packet(struct apple_z2 *z2)
+{
+	struct apple_z2_read_interrupt_cmd *len_cmd = (void *)z2->tx_buf;
+	struct spi_transfer xfer;
+	int error;
+	size_t pkt_len;
+
+	memset(&xfer, 0, sizeof(xfer));
+	len_cmd->cmd = APPLE_Z2_CMD_READ_INTERRUPT_DATA;
+	len_cmd->counter = z2->index_parity + 1;
+	len_cmd->checksum =
+		cpu_to_le16(APPLE_Z2_CMD_READ_INTERRUPT_DATA + len_cmd->counter);
+	z2->index_parity = !z2->index_parity;
+	xfer.tx_buf = z2->tx_buf;
+	xfer.rx_buf = z2->rx_buf;
+	xfer.len = sizeof(*len_cmd);
+
+	error = spi_sync_transfer(z2->spidev, &xfer, 1);
+	if (error)
+		return error;
+
+	pkt_len = (get_unaligned_le16(z2->rx_buf + 1) + 8) & 0xfffffffc;
+
+	error = spi_read(z2->spidev, z2->rx_buf, pkt_len);
+	if (error)
+		return error;
+
+	apple_z2_parse_touches(z2, z2->rx_buf + 5, pkt_len - 5);
+
+	return 0;
+}
+
+static irqreturn_t apple_z2_irq(int irq, void *data)
+{
+	struct apple_z2 *z2 = data;
+
+	if (unlikely(!z2->booted))
+		complete(&z2->boot_irq);
+	else
+		apple_z2_read_packet(z2);
+
+	return IRQ_HANDLED;
+}
+
+/* Build calibration blob, caller is responsible for freeing the blob data. */
+static const u8 *apple_z2_build_cal_blob(struct apple_z2 *z2,
+					 u32 address, size_t *size)
+{
+	u8 *cal_data;
+	int cal_size;
+	size_t blob_size;
+	u32 checksum;
+	u16 checksum_hdr;
+	int i;
+	struct apple_z2_hbpp_blob_hdr *hdr;
+	int error;
+
+	if (!device_property_present(&z2->spidev->dev, CAL_PROP_NAME))
+		return NULL;
+
+	cal_size = device_property_count_u8(&z2->spidev->dev, CAL_PROP_NAME);
+	if (cal_size < 0)
+		return ERR_PTR(cal_size);
+
+	blob_size = sizeof(struct apple_z2_hbpp_blob_hdr) + cal_size + sizeof(__le32);
+	u8 *blob_data __free(kfree) = kzalloc(blob_size, GFP_KERNEL);
+	if (!blob_data)
+		return ERR_PTR(-ENOMEM);
+
+	hdr = (struct apple_z2_hbpp_blob_hdr *)blob_data;
+	hdr->cmd = cpu_to_le16(APPLE_Z2_HBPP_CMD_BLOB);
+	hdr->len = cpu_to_le16(round_up(cal_size, 4) / 4);
+	hdr->addr = cpu_to_le32(address);
+
+	checksum_hdr = 0;
+	for (i = 2; i < 8; i++)
+		checksum_hdr += blob_data[i];
+	hdr->checksum = cpu_to_le16(checksum_hdr);
+
+	cal_data = blob_data + sizeof(struct apple_z2_hbpp_blob_hdr);
+	error = device_property_read_u8_array(&z2->spidev->dev, CAL_PROP_NAME,
+					      cal_data, cal_size);
+	if (error)
+		return ERR_PTR(error);
+
+	checksum = 0;
+	for (i = 0; i < cal_size; i++)
+		checksum += cal_data[i];
+	put_unaligned_le32(checksum, cal_data + cal_size);
+
+	*size = blob_size;
+	return no_free_ptr(blob_data);
+}
+
+static int apple_z2_send_firmware_blob(struct apple_z2 *z2, const u8 *data,
+				       u32 size, bool init)
+{
+	struct spi_message msg;
+	struct spi_transfer blob_xfer, ack_xfer;
+	int error;
+
+	z2->tx_buf[0] = 0x1a;
+	z2->tx_buf[1] = 0xa1;
+
+	spi_message_init(&msg);
+	memset(&blob_xfer, 0, sizeof(blob_xfer));
+	memset(&ack_xfer, 0, sizeof(ack_xfer));
+
+	blob_xfer.tx_buf = data;
+	blob_xfer.len = size;
+	blob_xfer.bits_per_word = init ? 8 : 16;
+	spi_message_add_tail(&blob_xfer, &msg);
+
+	ack_xfer.tx_buf = z2->tx_buf;
+	ack_xfer.len = 2;
+	spi_message_add_tail(&ack_xfer, &msg);
+
+	reinit_completion(&z2->boot_irq);
+	error = spi_sync(z2->spidev, &msg);
+	if (error)
+		return error;
+
+	/* Irq only happens sometimes, but the thing boots reliably nonetheless */
+	wait_for_completion_timeout(&z2->boot_irq, msecs_to_jiffies(20));
+
+	return 0;
+}
+
+static int apple_z2_upload_firmware(struct apple_z2 *z2)
+{
+	const struct apple_z2_fw_hdr *fw_hdr;
+	size_t fw_idx = sizeof(struct apple_z2_fw_hdr);
+	int error;
+	u32 load_cmd;
+	u32 address;
+	bool init;
+	size_t size;
+
+	const struct firmware *fw __free(firmware) = NULL;
+	error = request_firmware(&fw, z2->fw_name, &z2->spidev->dev);
+	if (error) {
+		dev_err(&z2->spidev->dev, "unable to load firmware\n");
+		return error;
+	}
+
+	fw_hdr = (const struct apple_z2_fw_hdr *)fw->data;
+	if (le32_to_cpu(fw_hdr->magic) != APPLE_Z2_FW_MAGIC || le32_to_cpu(fw_hdr->version) != 1) {
+		dev_err(&z2->spidev->dev, "invalid firmware header\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * This will interrupt the upload half-way if the file is malformed
+	 * As the device has no non-volatile storage to corrupt, and gets reset
+	 * on boot anyway, this is fine.
+	 */
+	while (fw_idx < fw->size) {
+		if (fw->size - fw_idx < 8) {
+			dev_err(&z2->spidev->dev, "firmware malformed\n");
+			return -EINVAL;
+		}
+
+		load_cmd = le32_to_cpup((__force __le32 *)(fw->data + fw_idx));
+		fw_idx += sizeof(u32);
+		if (load_cmd == LOAD_COMMAND_INIT_PAYLOAD || load_cmd == LOAD_COMMAND_SEND_BLOB) {
+			size = le32_to_cpup((__force __le32 *)(fw->data + fw_idx));
+			fw_idx += sizeof(u32);
+			if (fw->size - fw_idx < size) {
+				dev_err(&z2->spidev->dev, "firmware malformed\n");
+				return -EINVAL;
+			}
+			init = load_cmd == LOAD_COMMAND_INIT_PAYLOAD;
+			error = apple_z2_send_firmware_blob(z2, fw->data + fw_idx,
+							    size, init);
+			if (error)
+				return error;
+			fw_idx += size;
+		} else if (load_cmd == LOAD_COMMAND_SEND_CALIBRATION) {
+			address = le32_to_cpup((__force __le32 *)(fw->data + fw_idx));
+			fw_idx += sizeof(u32);
+
+			const u8 *data __free(kfree) =
+				apple_z2_build_cal_blob(z2, address, &size);
+			if (IS_ERR(data))
+				return PTR_ERR(data);
+
+			if (data) {
+				error = apple_z2_send_firmware_blob(z2, data, size, false);
+				if (error)
+					return error;
+			}
+		} else {
+			dev_err(&z2->spidev->dev, "firmware malformed\n");
+			return -EINVAL;
+		}
+		fw_idx = round_up(fw_idx, 4);
+	}
+
+
+	z2->booted = true;
+	apple_z2_read_packet(z2);
+	return 0;
+}
+
+static int apple_z2_boot(struct apple_z2 *z2)
+{
+	int error;
+
+	reinit_completion(&z2->boot_irq);
+	enable_irq(z2->spidev->irq);
+	gpiod_set_value(z2->reset_gpio, 0);
+	if (!wait_for_completion_timeout(&z2->boot_irq, msecs_to_jiffies(20)))
+		return -ETIMEDOUT;
+
+	error = apple_z2_upload_firmware(z2);
+	if (error) {
+		gpiod_set_value(z2->reset_gpio, 1);
+		disable_irq(z2->spidev->irq);
+		return error;
+	}
+
+	return 0;
+}
+
+static int apple_z2_probe(struct spi_device *spi)
+{
+	struct device *dev = &spi->dev;
+	struct apple_z2 *z2;
+	int error;
+
+	z2 = devm_kzalloc(dev, sizeof(*z2), GFP_KERNEL);
+	if (!z2)
+		return -ENOMEM;
+
+	z2->tx_buf = devm_kzalloc(dev, sizeof(struct apple_z2_read_interrupt_cmd), GFP_KERNEL);
+	if (!z2->tx_buf)
+		return -ENOMEM;
+	/* 4096 will end up being rounded up to 8192 due to devres header */
+	z2->rx_buf = devm_kzalloc(dev, 4000, GFP_KERNEL);
+	if (!z2->rx_buf)
+		return -ENOMEM;
+
+	z2->spidev = spi;
+	init_completion(&z2->boot_irq);
+	spi_set_drvdata(spi, z2);
+
+	/* Reset the device on boot */
+	z2->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(z2->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(z2->reset_gpio), "unable to get reset\n");
+
+	error = devm_request_threaded_irq(dev, z2->spidev->irq, NULL, apple_z2_irq,
+					  IRQF_ONESHOT | IRQF_NO_AUTOEN,
+					  "apple-z2-irq", z2);
+	if (error)
+		return dev_err_probe(dev, error, "unable to request irq\n");
+
+	error = device_property_read_string(dev, "firmware-name", &z2->fw_name);
+	if (error)
+		return dev_err_probe(dev, error, "unable to get firmware name\n");
+
+	z2->input_dev = devm_input_allocate_device(dev);
+	if (!z2->input_dev)
+		return -ENOMEM;
+
+	z2->input_dev->name = (char *)spi_get_device_id(spi)->driver_data;
+	z2->input_dev->phys = "apple_z2";
+	z2->input_dev->id.bustype = BUS_SPI;
+
+	/* Allocate the axes before setting from DT */
+	input_set_abs_params(z2->input_dev, ABS_MT_POSITION_X, 0, 0, 0, 0);
+	input_set_abs_params(z2->input_dev, ABS_MT_POSITION_Y, 0, 0, 0, 0);
+	touchscreen_parse_properties(z2->input_dev, true, &z2->props);
+	input_abs_set_res(z2->input_dev, ABS_MT_POSITION_X, 100);
+	input_abs_set_res(z2->input_dev, ABS_MT_POSITION_Y, 100);
+	input_set_abs_params(z2->input_dev, ABS_MT_WIDTH_MAJOR, 0, 65535, 0, 0);
+	input_set_abs_params(z2->input_dev, ABS_MT_WIDTH_MINOR, 0, 65535, 0, 0);
+	input_set_abs_params(z2->input_dev, ABS_MT_TOUCH_MAJOR, 0, 65535, 0, 0);
+	input_set_abs_params(z2->input_dev, ABS_MT_TOUCH_MINOR, 0, 65535, 0, 0);
+	input_set_abs_params(z2->input_dev, ABS_MT_ORIENTATION, -32768, 32767, 0, 0);
+
+	error = input_mt_init_slots(z2->input_dev, 256, INPUT_MT_DIRECT);
+	if (error)
+		return dev_err_probe(dev, error, "unable to initialize multitouch slots\n");
+
+	error = input_register_device(z2->input_dev);
+	if (error)
+		return dev_err_probe(dev, error, "unable to register input device\n");
+
+	/* Wait for device reset to finish */
+	usleep_range(5000, 10000);
+	error = apple_z2_boot(z2);
+	if (error)
+		return error;
+
+	return 0;
+}
+
+static void apple_z2_shutdown(struct spi_device *spi)
+{
+	struct apple_z2 *z2 = spi_get_drvdata(spi);
+
+	disable_irq(z2->spidev->irq);
+	gpiod_direction_output(z2->reset_gpio, 1);
+	z2->booted = false;
+}
+
+static int apple_z2_suspend(struct device *dev)
+{
+	apple_z2_shutdown(to_spi_device(dev));
+
+	return 0;
+}
+
+static int apple_z2_resume(struct device *dev)
+{
+	struct apple_z2 *z2 = spi_get_drvdata(to_spi_device(dev));
+
+	return apple_z2_boot(z2);
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(apple_z2_pm, apple_z2_suspend, apple_z2_resume);
+
+static const struct of_device_id apple_z2_of_match[] = {
+	{ .compatible = "apple,j293-touchbar" },
+	{ .compatible = "apple,j493-touchbar" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, apple_z2_of_match);
+
+static struct spi_device_id apple_z2_of_id[] = {
+	{ .name = "j293-touchbar", .driver_data = (kernel_ulong_t)"MacBookPro17,1 Touch Bar" },
+	{ .name = "j493-touchbar", .driver_data = (kernel_ulong_t)"Mac14,7 Touch Bar" },
+	{}
+};
+MODULE_DEVICE_TABLE(spi, apple_z2_of_id);
+
+static struct spi_driver apple_z2_driver = {
+	.driver = {
+		.name	= "apple-z2",
+		.pm	= pm_sleep_ptr(&apple_z2_pm),
+		.of_match_table = apple_z2_of_match,
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+	.id_table = apple_z2_of_id,
+	.probe    = apple_z2_probe,
+	.remove   = apple_z2_shutdown,
+};
+
+module_spi_driver(apple_z2_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE("apple/dfrmtfw-*.bin");
+MODULE_DESCRIPTION("Apple Z2 touchscreens driver");
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 3ddabc5a2c99..322d5a3d40a0 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -2535,8 +2535,6 @@ fault:
 static const struct vb2_ops mxt_queue_ops = {
 	.queue_setup		= mxt_queue_setup,
 	.buf_queue		= mxt_buffer_queue,
-	.wait_prepare		= vb2_ops_wait_prepare,
-	.wait_finish		= vb2_ops_wait_finish,
 };
 
 static const struct vb2_queue mxt_queue = {
diff --git a/drivers/input/touchscreen/goodix_berlin.h b/drivers/input/touchscreen/goodix_berlin.h
index 38b6f9ddbdef..d8bbd4853206 100644
--- a/drivers/input/touchscreen/goodix_berlin.h
+++ b/drivers/input/touchscreen/goodix_berlin.h
@@ -12,12 +12,26 @@
 
 #include <linux/pm.h>
 
+#define GOODIX_BERLIN_FW_VERSION_INFO_ADDR_A	0x1000C
+#define GOODIX_BERLIN_FW_VERSION_INFO_ADDR_D	0x10014
+
+#define GOODIX_BERLIN_IC_INFO_ADDR_A		0x10068
+#define GOODIX_BERLIN_IC_INFO_ADDR_D		0x10070
+
+struct goodix_berlin_ic_data {
+	int fw_version_info_addr;
+	int ic_info_addr;
+	ssize_t read_dummy_len;
+	ssize_t read_prefix_len;
+};
+
 struct device;
 struct input_id;
 struct regmap;
 
 int goodix_berlin_probe(struct device *dev, int irq, const struct input_id *id,
-			struct regmap *regmap);
+			struct regmap *regmap,
+			const struct goodix_berlin_ic_data *ic_data);
 
 extern const struct dev_pm_ops goodix_berlin_pm_ops;
 extern const struct attribute_group *goodix_berlin_groups[];
diff --git a/drivers/input/touchscreen/goodix_berlin_core.c b/drivers/input/touchscreen/goodix_berlin_core.c
index f7ea443b152e..02a1d9a465f2 100644
--- a/drivers/input/touchscreen/goodix_berlin_core.c
+++ b/drivers/input/touchscreen/goodix_berlin_core.c
@@ -12,7 +12,7 @@
  * to the previous generations.
  *
  * Currently the driver only handles Multitouch events with already
- * programmed firmware and "config" for "Revision D" Berlin IC.
+ * programmed firmware and "config" for "Revision A/D" Berlin IC.
  *
  * Support is missing for:
  * - ESD Management
@@ -20,7 +20,7 @@
  * - "Config" update/flashing
  * - Stylus Events
  * - Gesture Events
- * - Support for older revisions (A & B)
+ * - Support for revision B
  */
 
 #include <linux/bitfield.h>
@@ -28,6 +28,7 @@
 #include <linux/input.h>
 #include <linux/input/mt.h>
 #include <linux/input/touchscreen.h>
+#include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
 #include <linux/sizes.h>
@@ -53,10 +54,8 @@
 
 #define GOODIX_BERLIN_DEV_CONFIRM_VAL		0xAA
 #define GOODIX_BERLIN_BOOTOPTION_ADDR		0x10000
-#define GOODIX_BERLIN_FW_VERSION_INFO_ADDR	0x10014
 
 #define GOODIX_BERLIN_IC_INFO_MAX_LEN		SZ_1K
-#define GOODIX_BERLIN_IC_INFO_ADDR		0x10070
 
 #define GOODIX_BERLIN_CHECKSUM_SIZE		sizeof(u16)
 
@@ -175,6 +174,8 @@ struct goodix_berlin_core {
 	/* Runtime parameters extracted from IC_INFO buffer  */
 	u32 touch_data_addr;
 
+	const struct goodix_berlin_ic_data *ic_data;
+
 	struct goodix_berlin_event event;
 };
 
@@ -299,7 +300,7 @@ static int goodix_berlin_read_version(struct goodix_berlin_core *cd)
 {
 	int error;
 
-	error = regmap_raw_read(cd->regmap, GOODIX_BERLIN_FW_VERSION_INFO_ADDR,
+	error = regmap_raw_read(cd->regmap, cd->ic_data->fw_version_info_addr,
 				&cd->fw_version, sizeof(cd->fw_version));
 	if (error) {
 		dev_err(cd->dev, "error reading fw version, %d\n", error);
@@ -367,7 +368,7 @@ static int goodix_berlin_get_ic_info(struct goodix_berlin_core *cd)
 	if (!afe_data)
 		return -ENOMEM;
 
-	error = regmap_raw_read(cd->regmap, GOODIX_BERLIN_IC_INFO_ADDR,
+	error = regmap_raw_read(cd->regmap, cd->ic_data->ic_info_addr,
 				&length_raw, sizeof(length_raw));
 	if (error) {
 		dev_err(cd->dev, "failed get ic info length, %d\n", error);
@@ -380,8 +381,8 @@ static int goodix_berlin_get_ic_info(struct goodix_berlin_core *cd)
 		return -EINVAL;
 	}
 
-	error = regmap_raw_read(cd->regmap, GOODIX_BERLIN_IC_INFO_ADDR,
-				afe_data, length);
+	error = regmap_raw_read(cd->regmap, cd->ic_data->ic_info_addr, afe_data,
+				length);
 	if (error) {
 		dev_err(cd->dev, "failed get ic info data, %d\n", error);
 		return error;
@@ -716,7 +717,8 @@ const struct attribute_group *goodix_berlin_groups[] = {
 EXPORT_SYMBOL_GPL(goodix_berlin_groups);
 
 int goodix_berlin_probe(struct device *dev, int irq, const struct input_id *id,
-			struct regmap *regmap)
+			struct regmap *regmap,
+			const struct goodix_berlin_ic_data *ic_data)
 {
 	struct goodix_berlin_core *cd;
 	int error;
@@ -733,6 +735,7 @@ int goodix_berlin_probe(struct device *dev, int irq, const struct input_id *id,
 	cd->dev = dev;
 	cd->regmap = regmap;
 	cd->irq = irq;
+	cd->ic_data = ic_data;
 
 	cd->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
 	if (IS_ERR(cd->reset_gpio))
diff --git a/drivers/input/touchscreen/goodix_berlin_i2c.c b/drivers/input/touchscreen/goodix_berlin_i2c.c
index ad7a60d94338..929090a094bf 100644
--- a/drivers/input/touchscreen/goodix_berlin_i2c.c
+++ b/drivers/input/touchscreen/goodix_berlin_i2c.c
@@ -31,6 +31,8 @@ static const struct input_id goodix_berlin_i2c_input_id = {
 
 static int goodix_berlin_i2c_probe(struct i2c_client *client)
 {
+	const struct goodix_berlin_ic_data *ic_data =
+		i2c_get_match_data(client);
 	struct regmap *regmap;
 	int error;
 
@@ -39,22 +41,28 @@ static int goodix_berlin_i2c_probe(struct i2c_client *client)
 		return PTR_ERR(regmap);
 
 	error = goodix_berlin_probe(&client->dev, client->irq,
-				    &goodix_berlin_i2c_input_id, regmap);
+				    &goodix_berlin_i2c_input_id, regmap,
+				    ic_data);
 	if (error)
 		return error;
 
 	return 0;
 }
 
+static const struct goodix_berlin_ic_data gt9916_data = {
+	.fw_version_info_addr = GOODIX_BERLIN_FW_VERSION_INFO_ADDR_D,
+	.ic_info_addr = GOODIX_BERLIN_IC_INFO_ADDR_D,
+};
+
 static const struct i2c_device_id goodix_berlin_i2c_id[] = {
-	{ "gt9916" },
+	{ .name = "gt9916", .driver_data = (long)&gt9916_data },
 	{ }
 };
 
 MODULE_DEVICE_TABLE(i2c, goodix_berlin_i2c_id);
 
 static const struct of_device_id goodix_berlin_i2c_of_match[] = {
-	{ .compatible = "goodix,gt9916", },
+	{ .compatible = "goodix,gt9916", .data = &gt9916_data },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, goodix_berlin_i2c_of_match);
diff --git a/drivers/input/touchscreen/goodix_berlin_spi.c b/drivers/input/touchscreen/goodix_berlin_spi.c
index 0662e87b8692..01f850f484c2 100644
--- a/drivers/input/touchscreen/goodix_berlin_spi.c
+++ b/drivers/input/touchscreen/goodix_berlin_spi.c
@@ -18,10 +18,14 @@
 
 #define GOODIX_BERLIN_SPI_TRANS_PREFIX_LEN	1
 #define GOODIX_BERLIN_REGISTER_WIDTH		4
-#define GOODIX_BERLIN_SPI_READ_DUMMY_LEN	3
-#define GOODIX_BERLIN_SPI_READ_PREFIX_LEN	(GOODIX_BERLIN_SPI_TRANS_PREFIX_LEN + \
+#define GOODIX_BERLIN_SPI_READ_DUMMY_LEN_A	4
+#define GOODIX_BERLIN_SPI_READ_DUMMY_LEN_D	3
+#define GOODIX_BERLIN_SPI_READ_PREFIX_LEN_A	(GOODIX_BERLIN_SPI_TRANS_PREFIX_LEN + \
 						 GOODIX_BERLIN_REGISTER_WIDTH + \
-						 GOODIX_BERLIN_SPI_READ_DUMMY_LEN)
+						 GOODIX_BERLIN_SPI_READ_DUMMY_LEN_A)
+#define GOODIX_BERLIN_SPI_READ_PREFIX_LEN_D	(GOODIX_BERLIN_SPI_TRANS_PREFIX_LEN + \
+						 GOODIX_BERLIN_REGISTER_WIDTH + \
+						 GOODIX_BERLIN_SPI_READ_DUMMY_LEN_D)
 #define GOODIX_BERLIN_SPI_WRITE_PREFIX_LEN	(GOODIX_BERLIN_SPI_TRANS_PREFIX_LEN + \
 						 GOODIX_BERLIN_REGISTER_WIDTH)
 
@@ -33,6 +37,7 @@ static int goodix_berlin_spi_read(void *context, const void *reg_buf,
 				  size_t val_size)
 {
 	struct spi_device *spi = context;
+	const struct goodix_berlin_ic_data *ic_data = spi_get_device_match_data(spi);
 	struct spi_transfer xfers;
 	struct spi_message spi_msg;
 	const u32 *reg = reg_buf; /* reg is stored as native u32 at start of buffer */
@@ -42,23 +47,22 @@ static int goodix_berlin_spi_read(void *context, const void *reg_buf,
 		return -EINVAL;
 
 	u8 *buf __free(kfree) =
-		kzalloc(GOODIX_BERLIN_SPI_READ_PREFIX_LEN + val_size,
-			GFP_KERNEL);
+		kzalloc(ic_data->read_prefix_len + val_size, GFP_KERNEL);
 	if (!buf)
 		return -ENOMEM;
 
 	spi_message_init(&spi_msg);
 	memset(&xfers, 0, sizeof(xfers));
 
-	/* buffer format: 0xF1 + addr(4bytes) + dummy(3bytes) + data */
+	/* buffer format: 0xF1 + addr(4bytes) + dummy(3/4bytes) + data */
 	buf[0] = GOODIX_BERLIN_SPI_READ_FLAG;
 	put_unaligned_be32(*reg, buf + GOODIX_BERLIN_SPI_TRANS_PREFIX_LEN);
 	memset(buf + GOODIX_BERLIN_SPI_TRANS_PREFIX_LEN + GOODIX_BERLIN_REGISTER_WIDTH,
-	       0xff, GOODIX_BERLIN_SPI_READ_DUMMY_LEN);
+	       0xff, ic_data->read_dummy_len);
 
 	xfers.tx_buf = buf;
 	xfers.rx_buf = buf;
-	xfers.len = GOODIX_BERLIN_SPI_READ_PREFIX_LEN + val_size;
+	xfers.len = ic_data->read_prefix_len + val_size;
 	xfers.cs_change = 0;
 	spi_message_add_tail(&xfers, &spi_msg);
 
@@ -68,7 +72,7 @@ static int goodix_berlin_spi_read(void *context, const void *reg_buf,
 		return error;
 	}
 
-	memcpy(val_buf, buf + GOODIX_BERLIN_SPI_READ_PREFIX_LEN, val_size);
+	memcpy(val_buf, buf + ic_data->read_prefix_len, val_size);
 	return error;
 }
 
@@ -123,6 +127,7 @@ static const struct input_id goodix_berlin_spi_input_id = {
 
 static int goodix_berlin_spi_probe(struct spi_device *spi)
 {
+	const struct goodix_berlin_ic_data *ic_data = spi_get_device_match_data(spi);
 	struct regmap_config regmap_config;
 	struct regmap *regmap;
 	size_t max_size;
@@ -137,7 +142,7 @@ static int goodix_berlin_spi_probe(struct spi_device *spi)
 	max_size = spi_max_transfer_size(spi);
 
 	regmap_config = goodix_berlin_spi_regmap_conf;
-	regmap_config.max_raw_read = max_size - GOODIX_BERLIN_SPI_READ_PREFIX_LEN;
+	regmap_config.max_raw_read = max_size - ic_data->read_prefix_len;
 	regmap_config.max_raw_write = max_size - GOODIX_BERLIN_SPI_WRITE_PREFIX_LEN;
 
 	regmap = devm_regmap_init(&spi->dev, NULL, spi, &regmap_config);
@@ -145,21 +150,38 @@ static int goodix_berlin_spi_probe(struct spi_device *spi)
 		return PTR_ERR(regmap);
 
 	error = goodix_berlin_probe(&spi->dev, spi->irq,
-				    &goodix_berlin_spi_input_id, regmap);
+				    &goodix_berlin_spi_input_id, regmap,
+				    ic_data);
 	if (error)
 		return error;
 
 	return 0;
 }
 
+static const struct goodix_berlin_ic_data gt9897_data = {
+	.fw_version_info_addr = GOODIX_BERLIN_FW_VERSION_INFO_ADDR_A,
+	.ic_info_addr = GOODIX_BERLIN_IC_INFO_ADDR_A,
+	.read_dummy_len = GOODIX_BERLIN_SPI_READ_DUMMY_LEN_A,
+	.read_prefix_len = GOODIX_BERLIN_SPI_READ_PREFIX_LEN_A,
+};
+
+static const struct goodix_berlin_ic_data gt9916_data = {
+	.fw_version_info_addr = GOODIX_BERLIN_FW_VERSION_INFO_ADDR_D,
+	.ic_info_addr = GOODIX_BERLIN_IC_INFO_ADDR_D,
+	.read_dummy_len = GOODIX_BERLIN_SPI_READ_DUMMY_LEN_D,
+	.read_prefix_len = GOODIX_BERLIN_SPI_READ_PREFIX_LEN_D,
+};
+
 static const struct spi_device_id goodix_berlin_spi_ids[] = {
-	{ "gt9916" },
+	{ .name = "gt9897", .driver_data = (long)&gt9897_data },
+	{ .name = "gt9916", .driver_data = (long)&gt9916_data },
 	{ },
 };
 MODULE_DEVICE_TABLE(spi, goodix_berlin_spi_ids);
 
 static const struct of_device_id goodix_berlin_spi_of_match[] = {
-	{ .compatible = "goodix,gt9916", },
+	{ .compatible = "goodix,gt9897", .data = &gt9897_data },
+	{ .compatible = "goodix,gt9916", .data = &gt9916_data },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, goodix_berlin_spi_of_match);
diff --git a/drivers/input/touchscreen/sur40.c b/drivers/input/touchscreen/sur40.c
index 8365a2ac6fce..7b3b10cbfcfc 100644
--- a/drivers/input/touchscreen/sur40.c
+++ b/drivers/input/touchscreen/sur40.c
@@ -1108,8 +1108,6 @@ static const struct vb2_ops sur40_queue_ops = {
 	.buf_queue		= sur40_buffer_queue,
 	.start_streaming	= sur40_start_streaming,
 	.stop_streaming		= sur40_stop_streaming,
-	.wait_prepare		= vb2_ops_wait_prepare,
-	.wait_finish		= vb2_ops_wait_finish,
 };
 
 static const struct vb2_queue sur40_queue = {