6 files changed, 21 insertions, 10 deletions

diff --git a/drivers/iio/adc/ad4030.c b/drivers/iio/adc/ad4030.c
index 1bc2f9a22470..d8bee6a4215a 100644
--- a/drivers/iio/adc/ad4030.c
+++ b/drivers/iio/adc/ad4030.c
@@ -385,7 +385,7 @@ static int ad4030_get_chan_scale(struct iio_dev *indio_dev,
 	struct ad4030_state *st = iio_priv(indio_dev);
 	const struct iio_scan_type *scan_type;
 
-	scan_type = iio_get_current_scan_type(indio_dev, st->chip->channels);
+	scan_type = iio_get_current_scan_type(indio_dev, chan);
 	if (IS_ERR(scan_type))
 		return PTR_ERR(scan_type);
 
diff --git a/drivers/iio/adc/ad7124.c b/drivers/iio/adc/ad7124.c
index 910b40393f77..61623cc6cb25 100644
--- a/drivers/iio/adc/ad7124.c
+++ b/drivers/iio/adc/ad7124.c
@@ -1525,10 +1525,6 @@ static int __ad7124_calibrate_all(struct ad7124_state *st, struct iio_dev *indio
 	int ret, i;
 
 	for (i = 0; i < st->num_channels; i++) {
-
-		if (indio_dev->channels[i].type != IIO_VOLTAGE)
-			continue;
-
 		/*
 		 * For calibration the OFFSET register should hold its reset default
 		 * value. For the GAIN register there is no such requirement but
@@ -1539,6 +1535,14 @@ static int __ad7124_calibrate_all(struct ad7124_state *st, struct iio_dev *indio
 		st->channels[i].cfg.calibration_gain = st->gain_default;
 
 		/*
+		 * Only the main voltage input channels are important enough
+		 * to be automatically calibrated here. For everything else,
+		 * just use the default values set above.
+		 */
+		if (indio_dev->channels[i].type != IIO_VOLTAGE)
+			continue;
+
+		/*
 		 * Full-scale calibration isn't supported at gain 1, so skip in
 		 * that case. Note that untypically full-scale calibration has
 		 * to happen before zero-scale calibration. This only applies to
diff --git a/drivers/iio/adc/ad7280a.c b/drivers/iio/adc/ad7280a.c
index dda2986ccda0..50a6ff7c8b1c 100644
--- a/drivers/iio/adc/ad7280a.c
+++ b/drivers/iio/adc/ad7280a.c
@@ -541,7 +541,7 @@ static ssize_t ad7280_store_balance_timer(struct iio_dev *indio_dev,
 	int val, val2;
 	int ret;
 
-	ret = iio_str_to_fixpoint(buf, 1000, &val, &val2);
+	ret = iio_str_to_fixpoint(buf, 100, &val, &val2);
 	if (ret)
 		return ret;
 
diff --git a/drivers/iio/adc/ad7380.c b/drivers/iio/adc/ad7380.c
index fa251dc1aae6..bfd908deefc0 100644
--- a/drivers/iio/adc/ad7380.c
+++ b/drivers/iio/adc/ad7380.c
@@ -1227,6 +1227,14 @@ static int ad7380_offload_buffer_postenable(struct iio_dev *indio_dev)
 	if (ret)
 		return ret;
 
+	/*
+	 * When the sequencer is required to read all channels, we need to
+	 * trigger twice per sample period in order to read one complete set
+	 * of samples.
+	 */
+	if (st->seq)
+		config.periodic.frequency_hz *= 2;
+
 	ret = spi_offload_trigger_enable(st->offload, st->offload_trigger, &config);
 	if (ret)
 		spi_unoptimize_message(&st->offload_msg);
diff --git a/drivers/iio/adc/rtq6056.c b/drivers/iio/adc/rtq6056.c
index ad9738228b7f..2bf3a09ac6b0 100644
--- a/drivers/iio/adc/rtq6056.c
+++ b/drivers/iio/adc/rtq6056.c
@@ -300,7 +300,7 @@ static int rtq6056_adc_read_channel(struct rtq6056_priv *priv,
 		return IIO_VAL_INT;
 	case RTQ6056_REG_SHUNTVOLT:
 	case RTQ6056_REG_CURRENT:
-		*val = sign_extend32(regval, 16);
+		*val = sign_extend32(regval, 15);
 		return IIO_VAL_INT;
 	default:
 		return -EINVAL;
diff --git a/drivers/iio/adc/stm32-dfsdm-adc.c b/drivers/iio/adc/stm32-dfsdm-adc.c
index 74b1b4dc6e81..9664b9bd75d4 100644
--- a/drivers/iio/adc/stm32-dfsdm-adc.c
+++ b/drivers/iio/adc/stm32-dfsdm-adc.c
@@ -725,9 +725,8 @@ static int stm32_dfsdm_generic_channel_parse_of(struct stm32_dfsdm *dfsdm,
 	}
 	df_ch->src = val;
 
-	ret = fwnode_property_read_u32(node, "st,adc-alt-channel", &df_ch->alt_si);
-	if (ret != -EINVAL)
-		df_ch->alt_si = 0;
+	if (fwnode_property_present(node, "st,adc-alt-channel"))
+		df_ch->alt_si = 1;
 
 	if (adc->dev_data->type == DFSDM_IIO) {
 		backend = devm_iio_backend_fwnode_get(&indio_dev->dev, NULL, node);