Age | Commit message (Collapse) | Author |
|
Since there is no protection in the SPI protocol against electrical
interferences, the driver shouldn't blindly trust the length payload
of CMD_RTS. So introduce a bounds check for incoming frames.
Fixes: 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250430133043.7722-4-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The LEN_MASK for CMD_RTS doesn't cover the whole parameter mask.
The Bit 11 is reserved, so adjust LEN_MASK accordingly.
Fixes: 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250430133043.7722-3-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The MSE102x doesn't provide any SPI commands for interrupt handling.
So in case the interrupt fired before the driver requests the IRQ,
the interrupt will never fire again. In order to fix this always poll
for pending packets after opening the interface.
Fixes: 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250430133043.7722-2-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jijie Shao says:
====================
There are some bugfix for the HNS3 ethernet driver
====================
Link: https://patch.msgid.link/20250430093052.2400464-1-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently the ptp_clock_register() is called before relative
ptp resource ready. It may cause unexpected result when upper
layer called the ptp API during the timewindow. Fix it by
moving the ptp_clock_register() to the function end.
Fixes: 0bf5eb788512 ("net: hns3: add support for PTP")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250430093052.2400464-5-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The size of the tm_qset file of debugfs is limited to 64 KB,
which is too small in the scenario with 1280 qsets.
The size needs to be expanded to 1 MB.
Fixes: 5e69ea7ee2a6 ("net: hns3: refactor the debugfs process")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20250430093052.2400464-4-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a VF is passthrough to a VM, and the VM is killed, the reported
interrupt may not been handled, it will remain, and won't be clear by
the nic engine even with a flr or tqp reset. When the VM restart, the
interrupt of the first vector may be dropped by the second enable_irq
in vfio, see the issue below:
https://gitlab.com/qemu-project/qemu/-/issues/2884#note_2423361621
We notice that the vfio has always behaved this way, and the interrupt
is a residue of the nic engine, so we fix the problem by moving the
vector enable process out of the enable_irq loop.
Fixes: 08a100689d4b ("net: hns3: re-organize vector handle")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20250430093052.2400464-3-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The VF driver missed to store the rx VLAN tag strip state when
user change the rx VLAN tag offload state. And it will default
to enable the rx vlan tag strip when re-init VF device after
reset. So if user disable rx VLAN tag offload, and trig reset,
then the HW will still strip the VLAN tag from packet nad fill
into RX BD, but the VF driver will ignore it for rx VLAN tag
offload disabled. It may cause the rx VLAN tag dropped.
Fixes: b2641e2ad456 ("net: hns3: Add support of hardware rx-vlan-offload to HNS3 VF driver")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250430093052.2400464-2-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-04-29 (idpf, igc)
For idpf:
Michal fixes error path handling to remove memory leak.
Larysa prevents reset from being called during shutdown.
For igc:
Jake adjusts locking order to resolve sleeping in atomic context.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: fix lock order in igc_ptp_reset
idpf: protect shutdown from reset
idpf: fix potential memory leak on kcalloc() failure
====================
Link: https://patch.msgid.link/20250429221034.3909139-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the host loses heartbeat messages from the device,
the driver calls the device-specific ndo_stop function,
which frees the resources. If the driver is unloaded in
this scenario, it calls ndo_stop again, attempting to free
resources that have already been freed, leading to a host
hang issue. To resolve this, dev_close should be called
instead of the device-specific stop function.dev_close
internally calls ndo_stop to stop the network interface
and performs additional cleanup tasks. During the driver
unload process, if the device is already down, ndo_stop
is not called.
Fixes: 5cb96c29aa0e ("octeon_ep: add heartbeat monitor")
Signed-off-by: Sathesh B Edara <sedara@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250429114624.19104-1-sedara@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Activate TX hang workaround also in
fec_enet_txq_submit_skb() when TSO is not enabled.
Errata: ERR007885
Symptoms: NETDEV WATCHDOG: eth0 (fec): transmit queue 0 timed out
commit 37d6017b84f7 ("net: fec: Workaround for imx6sx enet tx hang when enable three queues")
There is a TDAR race condition for mutliQ when the software sets TDAR
and the UDMA clears TDAR simultaneously or in a small window (2-4 cycles).
This will cause the udma_tx and udma_tx_arbiter state machines to hang.
So, the Workaround is checking TDAR status four time, if TDAR cleared by
hardware and then write TDAR, otherwise don't set TDAR.
Fixes: 53bb20d1faba ("net: fec: add variable reg_desc_active to speed things up")
Signed-off-by: Mattias Barthel <mattias.barthel@atlascopco.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250429090826.3101258-1-mattiasbarthel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Always map the `skb` to the LS descriptor. Previously skb was
mapped to EXT descriptor when the number of fragments is zero with
GSO enabled. Mapping the skb to EXT descriptor prevents it from
being freed, leading to a memory leak
Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Thangaraj Samynathan <thangaraj.s@microchip.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250429052527.10031-1-thangaraj.s@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On Adva boards, SMA sysfs store/get operations can call
__handle_signal_outputs() or __handle_signal_inputs() while the `irig`
and `dcf` pointers are uninitialized, leading to a NULL pointer
dereference in __handle_signal() and causing a kernel crash. Adva boards
don't use `irig` or `dcf` functionality, so add Adva-specific callbacks
`ptp_ocp_sma_adva_set_outputs()` and `ptp_ocp_sma_adva_set_inputs()` that
avoid invoking `irig` or `dcf` input/output routines.
Fixes: ef61f5528fca ("ptp: ocp: add Adva timecard support")
Signed-off-by: Sagi Maimon <maimon.sagi@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250429073320.33277-1-maimon.sagi@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It is possible for a pointer of type struct inet_timewait_sock to be
returned from the functions __inet_lookup_established() and
__inet6_lookup_established(). This can cause a crash when the
returned pointer is of type struct inet_timewait_sock and
sock_put() is called on it. The following is a crash call stack that
shows sk->sk_wmem_alloc being accessed in sk_free() during the call to
sock_put() on a struct inet_timewait_sock pointer. To avoid this issue,
use sock_gen_put() instead of sock_put() when sk->sk_state
is TCP_TIME_WAIT.
mrdump.ko ipanic() + 120
vmlinux notifier_call_chain(nr_to_call=-1, nr_calls=0) + 132
vmlinux atomic_notifier_call_chain(val=0) + 56
vmlinux panic() + 344
vmlinux add_taint() + 164
vmlinux end_report() + 136
vmlinux kasan_report(size=0) + 236
vmlinux report_tag_fault() + 16
vmlinux do_tag_recovery() + 16
vmlinux __do_kernel_fault() + 88
vmlinux do_bad_area() + 28
vmlinux do_tag_check_fault() + 60
vmlinux do_mem_abort() + 80
vmlinux el1_abort() + 56
vmlinux el1h_64_sync_handler() + 124
vmlinux > 0xFFFFFFC080011294()
vmlinux __lse_atomic_fetch_add_release(v=0xF2FFFF82A896087C)
vmlinux __lse_atomic_fetch_sub_release(v=0xF2FFFF82A896087C)
vmlinux arch_atomic_fetch_sub_release(i=1, v=0xF2FFFF82A896087C)
+ 8
vmlinux raw_atomic_fetch_sub_release(i=1, v=0xF2FFFF82A896087C)
+ 8
vmlinux atomic_fetch_sub_release(i=1, v=0xF2FFFF82A896087C) + 8
vmlinux __refcount_sub_and_test(i=1, r=0xF2FFFF82A896087C,
oldp=0) + 8
vmlinux __refcount_dec_and_test(r=0xF2FFFF82A896087C, oldp=0) + 8
vmlinux refcount_dec_and_test(r=0xF2FFFF82A896087C) + 8
vmlinux sk_free(sk=0xF2FFFF82A8960700) + 28
vmlinux sock_put() + 48
vmlinux tcp6_check_fraglist_gro() + 236
vmlinux tcp6_gro_receive() + 624
vmlinux ipv6_gro_receive() + 912
vmlinux dev_gro_receive() + 1116
vmlinux napi_gro_receive() + 196
ccmni.ko ccmni_rx_callback() + 208
ccmni.ko ccmni_queue_recv_skb() + 388
ccci_dpmaif.ko dpmaif_rxq_push_thread() + 1088
vmlinux kthread() + 268
vmlinux 0xFFFFFFC08001F30C()
Fixes: c9d1d23e5239 ("net: add heuristic for enabling TCP fraglist GRO")
Signed-off-by: Jibin Zhang <jibin.zhang@mediatek.com>
Signed-off-by: Shiming Cheng <shiming.cheng@mediatek.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250429020412.14163-1-shiming.cheng@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Recent updates to the PTP part of bnxt changed the way PTP FIFO is
cleared, skbs waiting for TX timestamps are now cleared during
ndo_close() call. To do clearing procedure, the ptp structure must
exist and point to a valid address. Module destroy sequence had ptp
clear code running before netdev close causing invalid memory access and
kernel crash. Change the sequence to destroy ptp structure after device
close.
Fixes: 8f7ae5a85137 ("bnxt_en: improve TX timestamping FIFO configuration")
Reported-by: Taehee Yoo <ap420073@gmail.com>
Closes: https://lore.kernel.org/netdev/CAMArcTWDe2cd41=ub=zzvYifaYcYv-N-csxfqxUvejy_L0D6UQ@mail.gmail.com/
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Tested-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250430170343.759126-1-vadfed@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 6.15
- fix queue unquiesce check on PCI slot_reset (Keith Busch)
- fix premature queue removal and I/O failover in nvme-tcp
(Michael Liang)
- don't restore null sk_state_change (Alistair Francis)
- select CONFIG_TLS where needed (Alistair Francis)
- always free derived key data (Hannes Reinecke)
- more quirks (Wentao Guan)"
* tag 'nvme-6.15-2025-05-01' of git://git.infradead.org/nvme:
nvmet-auth: always free derived key data
nvmet-tcp: don't restore null sk_state_change
nvmet-tcp: select CONFIG_TLS from CONFIG_NVME_TARGET_TCP_TLS
nvme-tcp: select CONFIG_TLS from CONFIG_NVME_TCP_TLS
nvme-tcp: fix premature queue removal and I/O failover
nvme-pci: add quirks for WDC Blue SN550 15b7:5009
nvme-pci: add quirks for device 126f:1001
nvme-pci: fix queue unquiesce check on slot_reset
|
|
Make all IO sizes multiple of PAGE_SIZE, either negotiated by the
server or passed through rsize, wsize and bsize mount options, to
prevent from breaking DIO reads and writes against servers that
enforce alignment as specified in MS-FSA 2.1.5.3 and 2.1.5.4.
Cc: linux-cifs@vger.kernel.org
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Replace with logging the error in the superblock.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We won't be root causing this in the immediate future, and it's fairly
innocuous - so just log it in the superblock.
https://github.com/koverstreet/bcachefs/issues/869
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.15
A moderately large batch of fixes for v6.15, many driver specific
including cleanups for the enabling of the Cirrus KUnit tests and a fix
for a nasty crash on resume on AMD systems. We also have one core fix,
for an ordering issue between DAPM and DPCM which could leave things
incorrectly unpowered.
|
|
Merge series from Stefan Binding <sbinding@opensource.cirrus.com>:
Both CS35L56 and CS42L43 have maximum volumes above 0dB.
However, for many use cases, this can cause distorted audio, depending
various factors, such as other signal-processing elements in the chain,
for example if the audio passes through a gain control before reaching
the amp or the signal path has been tuned for a particular maximum
gain in the amp.
In the cases where systems use the soc_sdw_* drivers, audio above the
0dB volume will likely always be distorted, therefore apply a 0dB
limit to those devices.
Stefan Binding (2):
ASoC: intel/sdw_utils: Add volume limit to cs42l43 speakers
ASoC: intel/sdw_utils: Add volume limit to cs35l56 speakers
include/sound/soc_sdw_utils.h | 1 +
sound/soc/sdw_utils/soc_sdw_bridge_cs35l56.c | 4 ++++
sound/soc/sdw_utils/soc_sdw_cs42l43.c | 10 ++++++++
sound/soc/sdw_utils/soc_sdw_cs_amp.c | 24 ++++++++++++++++++++
4 files changed, 39 insertions(+)
--
2.43.0
|
|
Merge series from Olivier Moysan <olivier.moysan@foss.st.com>:
This patchset adds some checks on kernel minimum rate requirements.
This avoids potential clock rate misconfiguration, when setting the
kernel frequency on STM32MP2 SoCs.
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A spurious WARN fix for nouveau, an init and interrupt handling fixes
for ivpu, a warning fix for ttm, a hotplug fix for fdinfo, vblank fixes
for adp, a memory leak fix for the shmem kunit tests, and a timing fix
for mipi-dbi.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://lore.kernel.org/r/20250430-dark-eggplant-trout-c4ea6c@houat
|
|
Clang and GCC have different behaviors around disabling warnings
included in -Wall and -Wextra and the order in which flags are
specified, which is exposed by clang's new support for
-Wunterminated-string-initialization.
$ cat test.c
const char foo[3] = "FOO";
const char bar[3] __attribute__((__nonstring__)) = "BAR";
$ clang -fsyntax-only -Wextra test.c
test.c:1:21: warning: initializer-string for character array is too long, array size is 3 but initializer has size 4 (including the null terminating character); did you mean to use the 'nonstring' attribute? [-Wunterminated-string-initialization]
1 | const char foo[3] = "FOO";
| ^~~~~
$ clang -fsyntax-only -Wextra -Wno-unterminated-string-initialization test.c
$ clang -fsyntax-only -Wno-unterminated-string-initialization -Wextra test.c
test.c:1:21: warning: initializer-string for character array is too long, array size is 3 but initializer has size 4 (including the null terminating character); did you mean to use the 'nonstring' attribute? [-Wunterminated-string-initialization]
1 | const char foo[3] = "FOO";
| ^~~~~
$ gcc -fsyntax-only -Wextra test.c
test.c:1:21: warning: initializer-string for array of ‘char’ truncates NUL terminator but destination lacks ‘nonstring’ attribute (4 chars into 3 available) [-Wunterminated-string-initialization]
1 | const char foo[3] = "FOO";
| ^~~~~
$ gcc -fsyntax-only -Wextra -Wno-unterminated-string-initialization test.c
$ gcc -fsyntax-only -Wno-unterminated-string-initialization -Wextra test.c
Move -Wextra up right below -Wall in Makefile.extrawarn to ensure these
flags are at the beginning of the warning options list. Move the couple
of warning options that have been added to the main Makefile since
commit e88ca24319e4 ("kbuild: consolidate warning flags in
scripts/Makefile.extrawarn") to scripts/Makefile.extrawarn after -Wall /
-Wextra to ensure they get properly disabled for all compilers.
Fixes: 9d7a0577c9db ("gcc-15: disable '-Wunterminated-string-initialization' entirely for now")
Link: https://github.com/llvm/llvm-project/issues/10359
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If any Soundwire manager interrupt is reported, and wake interrupt
is not reported, in this scenario irq_flag will be set to zero,
which results in interrupt handler return status as IRQ_NONE.
Add new irq flag 'wake_irq_flag' check for SoundWire wake interrupt
handling to fix incorrect irq handling return status.
Fixes: 3898b189079c8 ("ASoC: amd: ps: add soundwire wake interrupt handling")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20250430195517.3065308-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Actually check if the passed pointers are valid, before writing to them.
This also fixes a USBAN warning:
UBSAN: invalid-load in ../sound/soc/fsl/imx-card.c:687:25
load of value 255 is not a valid value for type '_Bool'
This is because playback_only is uninitialized and is not written to, as
the playback-only property is absent.
Fixes: 844de7eebe97 ("ASoC: audio-graph-card2: expand dai_link property part")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://patch.msgid.link/20250429094910.1150970-1-alexander.stein@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The volume control for cs35l56 speakers has a maximum gain of +12 dB.
However, for many use cases, this can cause distorted audio, depending
various factors, such as other signal-processing elements in the chain,
for example if the audio passes through a gain control before reaching
the amp or the signal path has been tuned for a particular maximum
gain in the amp.
In the case of systems which use the soc_sdw_* driver, audio will
likely be distorted in all cases above 0 dB, therefore add a volume
limit of 400, which is 0 dB maximum volume inside this driver.
The volume limit should be applied to both soundwire and soundwire
bridge configurations.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://patch.msgid.link/20250430103134.24579-3-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The volume control for cs42l43 speakers has a maximum gain of +31.5 dB.
However, for many use cases, this can cause distorted audio, depending
various factors, such as other signal-processing elements in the chain,
for example if the audio passes through a gain control before reaching
the codec or the signal path has been tuned for a particular maximum
gain in the codec.
In the case of systems which use the soc_sdw_cs42l43 driver, audio will
likely be distorted in all cases above 0 dB, therefore add a volume
limit of 128, which is 0 dB maximum volume inside this driver.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250430103134.24579-2-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On MP2 SoCs SAI kernel clock rate is managed through
stm32_sai_set_parent_rate() function.
If the kernel clock rate was set previously to a low frequency, this
frequency may be too low to support the newly requested audio stream rate.
However the stm32_sai_rate_accurate() will only check accuracy against
the maximum kernel clock rate. The function will return leaving the kernel
clock rate unchanged.
Add a check on minimal frequency requirement, to avoid this.
Fixes: 2cfe1ff22555 ("ASoC: stm32: sai: add stm32mp25 support")
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://patch.msgid.link/20250430165210.321273-3-olivier.moysan@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
the frequency of the kernel clock must be greater than or equal to the
bitclock rate. When searching for a convenient kernel clock rate in
stm32_sai_set_parent_rate() function, it is useless to continue the loop
below bitclock rate, as it will result in a invalid kernel clock rate.
Change the loop output condition.
Fixes: 2cfe1ff22555 ("ASoC: stm32: sai: add stm32mp25 support")
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://patch.msgid.link/20250430165210.321273-2-olivier.moysan@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
irq_domain_debug_show_one() calls msi_domain_debug_show() with a non-NULL
domain pointer and a NULL irq_data pointer. irq_debug_show_data() calls it
with a NULL domain pointer.
The domain pointer is not used, but the irq_data pointer is required to be
non-NULL and lacks a NULL pointer check.
Add the missing NULL pointer check to ensure there is a non-NULL irq_data
pointer in msi_domain_debug_show() before dereferencing it.
[ tglx: Massaged change log ]
Fixes: 01499ae673dc ("genirq/msi: Expose MSI message data in debugfs")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250430124836.49964-2-ajones@ventanamicro.com
|
|
More HP EliteBook with Realtek HDA codec ALC3247 and combined CS35L56
Amplifiers need quirk ALC236_FIXUP_HP_GPIO_LED to fix the micmute LED.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250430101843.150833-1-chris.chiu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix potential inode leak in iget() after memory allocation failure
- in subpage mode, fix extent buffer bitmap iteration when writing out
dirty sectors
- fix range calculation when falling back to COW for a NOCOW file
* tag 'for-6.15-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: adjust subpage bit start based on sectorsize
btrfs: fix the inode leak in btrfs_iget()
btrfs: fix COW handling in run_delalloc_nocow()
|
|
- Don't call bch2_trans_relock() after dir_emit(); taking a transaction
restart here will cause us to emit the same dirent to userspace twice
- Fix incorrect checking of the return value on dir_emit(): "true" means
success, keep going, but bch2_dir_emit() needs to return true when
we're finished iterating.
https://github.com/koverstreet/bcachefs/issues/867
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull modules fixes from Petr Pavlu:
"A single series to properly handle the module_kobject creation.
This fixes a problem with missing /sys/module/<module>/drivers for
built-in modules"
* tag 'modules-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
drivers: base: handle module_kobject creation
kernel: globalize lookup_or_create_module_kobject()
kernel: refactor lookup_or_create_module_kobject()
kernel: param: rename locate_module_kobject
|
|
function
Function CIFSSMBSetPathInfo() is not supported by non-NT servers and
returns error. Fallback code via open filehandle and CIFSSMBSetFileInfo()
does not work neither because CIFS_open() works also only on NT server.
Therefore currently the whole smb_set_file_info() function as a SMB1
callback for the ->set_file_info() does not work with older non-NT SMB
servers, like Win9x and others.
This change implements fallback code in smb_set_file_info() which will
works with any server and allows to change time values and also to set or
clear read-only attributes.
To make existing fallback code via CIFSSMBSetFileInfo() working with also
non-NT servers, it is needed to change open function from CIFS_open()
(which is NT specific) to cifs_open_file() which works with any server
(this is just a open wrapper function which choose the correct open
function supported by the server).
CIFSSMBSetFileInfo() is working also on non-NT servers, but zero time
values are not treated specially. So first it is needed to fill all time
values if some of them are missing, via cifs_query_path_info() call.
There is another issue, opening file in write-mode (needed for changing
attributes) is not possible when the file has read-only attribute set.
The only option how to clear read-only attribute is via SMB_COM_SETATTR
command. And opening directory is not possible neither and here the
SMB_COM_SETATTR command is the only option how to change attributes.
And CIFSSMBSetFileInfo() does not honor setting read-only attribute, so
for setting is also needed to use SMB_COM_SETATTR command.
Existing code in cifs_query_path_info() is already using SMB_COM_GETATTR as
a fallback code path (function SMBQueryInformation()), so introduce a new
function SMBSetInformation which will implement SMB_COM_SETATTR command.
My testing showed that Windows XP SMB1 client is also using SMB_COM_SETATTR
command for setting or clearing read-only attribute against non-NT server.
So this can prove that this is the correct way how to do it.
With this change it is possible set all 4 time values and all attributes,
including clearing and setting read-only bit on non-NT SMB servers.
Tested against Win98 SMB1 server.
This change fixes "touch" command which was failing when called on existing
file. And fixes also "chmod +w" and "chmod -w" commands which were also
failing (as they are changing read-only attribute).
Note that this change depends on following change
"cifs: Improve cifs_query_path_info() and cifs_query_file_info()"
as it require to query all 4 time attribute values.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When CAP_NT_SMBS was not negotiated then do not issue CIFSSMBQPathInfo()
and CIFSSMBQFileInfo() commands. CIFSSMBQPathInfo() is not supported by
non-NT Win9x SMB server and CIFSSMBQFileInfo() returns from Win9x SMB
server bogus data in Attributes field (for example lot of files are marked
as reparse points, even Win9x does not support them and read-only bit is
not marked for read-only files). Correct information is returned by
CIFSFindFirst() or SMBQueryInformation() command.
So as a fallback in cifs_query_path_info() function use CIFSFindFirst()
with SMB_FIND_FILE_FULL_DIRECTORY_INFO level which is supported by both NT
and non-NT servers and as a last option use SMBQueryInformation() as it was
before.
And in function cifs_query_file_info() immediately returns -EOPNOTSUPP when
not communicating with NT server. Client then revalidate inode entry by the
cifs_query_path_info() call, which is working fine. So fstat() syscall on
already opened file will receive correct information.
Note that both fallback functions in non-UNICODE mode expands wildcards.
Therefore those fallback functions cannot be used on paths which contain
SMB wildcard characters (* ? " > <).
CIFSFindFirst() returns all 4 time attributes as opposite of
SMBQueryInformation() which returns only one.
With this change it is possible to query all 4 times attributes from Win9x
server and at the same time, client minimize sending of unsupported
commands to server.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
SMB create requests issued via smb311_posix_mkdir() have an incorrect
length of zero bytes for the POSIX create context data. ksmbd server
rejects such requests and logs "cli req too short" causing mkdir to fail
with "invalid argument" on the client side. It also causes subsequent
rmmod to crash in cifs_destroy_request_bufs()
Inspection of packets sent by cifs.ko using wireshark show valid data for
the SMB2_POSIX_CREATE_CONTEXT is appended with the correct offset, but
with an incorrect length of zero bytes. Fails with ksmbd+cifs.ko only as
Windows server/client does not use POSIX extensions.
Fix smb311_posix_mkdir() to set req->CreateContextsLength as part of
appending the POSIX creation context to the request.
Signed-off-by: Jethro Donaldson <devel@jro.nz>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When turbo mode is unavailable on a Skylake-X system, executing the
command:
# echo 1 > /sys/devices/system/cpu/intel_pstate/no_turbo
results in an unchecked MSR access error:
WRMSR to 0x199 (attempted to write 0x0000000100001300).
This issue was reproduced on an OEM (Original Equipment Manufacturer)
system and is not a common problem across all Skylake-X systems.
This error occurs because the MSR 0x199 Turbo Engage Bit (bit 32) is set
when turbo mode is disabled. The issue arises when intel_pstate fails to
detect that turbo mode is disabled. Here intel_pstate relies on
MSR_IA32_MISC_ENABLE bit 38 to determine the status of turbo mode.
However, on this system, bit 38 is not set even when turbo mode is
disabled.
According to the Intel Software Developer's Manual (SDM), the BIOS sets
this bit during platform initialization to enable or disable
opportunistic processor performance operations. Logically, this bit
should be set in such cases. However, the SDM also specifies that "OS
and applications must use CPUID leaf 06H to detect processors with
opportunistic processor performance operations enabled."
Therefore, in addition to checking MSR_IA32_MISC_ENABLE bit 38, verify
that CPUID.06H:EAX[1] is 0 to accurately determine if turbo mode is
disabled.
Fixes: 4521e1a0ce17 ("cpufreq: intel_pstate: Reflect current no_turbo state correctly")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Before commit bca84a7b93fd ("PM: sleep: Use DPM_FLAG_SMART_SUSPEND
conditionally") the runtime PM status of the device in intel_resume()
had always been RPM_ACTIVE because setting DPM_FLAG_SMART_SUSPEND had
caused the core to call pm_runtime_set_active() for that device during
the "noirq" resume phase. For this reason, the pm_runtime_suspended()
check in intel_resume() had never triggered and the code depending on
it had never run. That had not caused any observable functional issues
to appear, so effectively the code in question had never been needed.
After commit bca84a7b93fd the core does not call pm_runtime_set_active()
for all devices with DPM_FLAG_SMART_SUSPEND set any more and the code
depending on the pm_runtime_suspended() check in intel_resume() runs if
the device is runtime-suspended prior to a system-wide suspend
transition. Unfortunately, when it runs, it breaks things due to the
attempt to runtime-resume bus->dev which most likely is not ready for a
runtime resume at that point.
It also does other more-or-less questionable things. Namely, it
calls pm_runtime_idle() for a device with a nonzero runtime PM usage
counter which has no effect (all devices have nonzero runtime PM
usage counters during system-wide suspend and resume). It also calls
pm_runtime_mark_last_busy() for the device even though devices cannot
runtime-suspend during system-wide suspend and resume (because their
runtime PM usage counters are nonzero) and an analogous call is made
in the same function later. Moreover, it sets the runtime PM status
of the device to RPM_ACTIVE before activating it.
For the reasons listed above, remove that code altogether.
On top of that, add a pm_runtime_disable() call to intel_suspend() to
prevent the device from being runtime-resumed at any point after
intel_suspend() has started to manipulate it because the changes
made by that function would be undone by a runtime-suspend of the
device.
Next, once runtime PM has been disabled, the runtime PM status of the
device cannot change, so pm_runtime_status_suspended() can be used
instead of pm_runtime_suspended() in intel_suspend().
Finally, make intel_resume() call pm_runtime_set_active() at the end to
set the runtime PM status of the device to "active" because it has just
been activated and re-enable runtime PM for it after that.
Additionally, drop the setting of DPM_FLAG_SMART_SUSPEND from the
driver because it has no effect on devices handled by it.
Fixes: bca84a7b93fd ("PM: sleep: Use DPM_FLAG_SMART_SUSPEND conditionally")
Reported-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Tested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/12680420.O9o76ZdvQC@rjwysocki.net
|
|
syzbot complains about the cached sq head read, and it's totally right.
But we don't need to care, it's just reading fdinfo, and reading the
CQ or SQ tail/head entries are known racy in that they are just a view
into that very instant and may of course be outdated by the time they
are reported.
Annotate both the SQ head and CQ tail read with data_race() to avoid
this syzbot complaint.
Link: https://lore.kernel.org/io-uring/6811f6dc.050a0220.39e3a1.0d0e.GAE@google.com/
Reported-by: syzbot+3e77fd302e99f5af9394@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
After calling nvme_auth_derive_tls_psk() we need to free the resulting
psk data, as either TLS is disable (and we don't need the data anyway)
or the psk data is copied into the resulting key (and can be free, too).
Fixes: fa2e0f8bbc68 ("nvmet-tcp: support secure channel concatenation")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Suggested-by: Maurizio Lombardi <mlombard@bsdbackstore.eu>
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
queue->state_change is set as part of nvmet_tcp_set_queue_sock(), but if
the TCP connection isn't established when nvmet_tcp_set_queue_sock() is
called then queue->state_change isn't set and sock->sk->sk_state_change
isn't replaced.
As such we don't need to restore sock->sk->sk_state_change if
queue->state_change is NULL.
This avoids NULL pointer dereferences such as this:
[ 286.462026][ C0] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 286.462814][ C0] #PF: supervisor instruction fetch in kernel mode
[ 286.463796][ C0] #PF: error_code(0x0010) - not-present page
[ 286.464392][ C0] PGD 8000000140620067 P4D 8000000140620067 PUD 114201067 PMD 0
[ 286.465086][ C0] Oops: Oops: 0010 [#1] SMP KASAN PTI
[ 286.465559][ C0] CPU: 0 UID: 0 PID: 1628 Comm: nvme Not tainted 6.15.0-rc2+ #11 PREEMPT(voluntary)
[ 286.466393][ C0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014
[ 286.467147][ C0] RIP: 0010:0x0
[ 286.467420][ C0] Code: Unable to access opcode bytes at 0xffffffffffffffd6.
[ 286.467977][ C0] RSP: 0018:ffff8883ae008580 EFLAGS: 00010246
[ 286.468425][ C0] RAX: 0000000000000000 RBX: ffff88813fd34100 RCX: ffffffffa386cc43
[ 286.469019][ C0] RDX: 1ffff11027fa68b6 RSI: 0000000000000008 RDI: ffff88813fd34100
[ 286.469545][ C0] RBP: ffff88813fd34160 R08: 0000000000000000 R09: ffffed1027fa682c
[ 286.470072][ C0] R10: ffff88813fd34167 R11: 0000000000000000 R12: ffff88813fd344c3
[ 286.470585][ C0] R13: ffff88813fd34112 R14: ffff88813fd34aec R15: ffff888132cdd268
[ 286.471070][ C0] FS: 00007fe3c04c7d80(0000) GS:ffff88840743f000(0000) knlGS:0000000000000000
[ 286.471644][ C0] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 286.472543][ C0] CR2: ffffffffffffffd6 CR3: 000000012daca000 CR4: 00000000000006f0
[ 286.473500][ C0] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 286.474467][ C0] DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400
[ 286.475453][ C0] Call Trace:
[ 286.476102][ C0] <IRQ>
[ 286.476719][ C0] tcp_fin+0x2bb/0x440
[ 286.477429][ C0] tcp_data_queue+0x190f/0x4e60
[ 286.478174][ C0] ? __build_skb_around+0x234/0x330
[ 286.478940][ C0] ? rcu_is_watching+0x11/0xb0
[ 286.479659][ C0] ? __pfx_tcp_data_queue+0x10/0x10
[ 286.480431][ C0] ? tcp_try_undo_loss+0x640/0x6c0
[ 286.481196][ C0] ? seqcount_lockdep_reader_access.constprop.0+0x82/0x90
[ 286.482046][ C0] ? kvm_clock_get_cycles+0x14/0x30
[ 286.482769][ C0] ? ktime_get+0x66/0x150
[ 286.483433][ C0] ? rcu_is_watching+0x11/0xb0
[ 286.484146][ C0] tcp_rcv_established+0x6e4/0x2050
[ 286.484857][ C0] ? rcu_is_watching+0x11/0xb0
[ 286.485523][ C0] ? ipv4_dst_check+0x160/0x2b0
[ 286.486203][ C0] ? __pfx_tcp_rcv_established+0x10/0x10
[ 286.486917][ C0] ? lock_release+0x217/0x2c0
[ 286.487595][ C0] tcp_v4_do_rcv+0x4d6/0x9b0
[ 286.488279][ C0] tcp_v4_rcv+0x2af8/0x3e30
[ 286.488904][ C0] ? raw_local_deliver+0x51b/0xad0
[ 286.489551][ C0] ? rcu_is_watching+0x11/0xb0
[ 286.490198][ C0] ? __pfx_tcp_v4_rcv+0x10/0x10
[ 286.490813][ C0] ? __pfx_raw_local_deliver+0x10/0x10
[ 286.491487][ C0] ? __pfx_nf_confirm+0x10/0x10 [nf_conntrack]
[ 286.492275][ C0] ? rcu_is_watching+0x11/0xb0
[ 286.492900][ C0] ip_protocol_deliver_rcu+0x8f/0x370
[ 286.493579][ C0] ip_local_deliver_finish+0x297/0x420
[ 286.494268][ C0] ip_local_deliver+0x168/0x430
[ 286.494867][ C0] ? __pfx_ip_local_deliver+0x10/0x10
[ 286.495498][ C0] ? __pfx_ip_local_deliver_finish+0x10/0x10
[ 286.496204][ C0] ? ip_rcv_finish_core+0x19a/0x1f20
[ 286.496806][ C0] ? lock_release+0x217/0x2c0
[ 286.497414][ C0] ip_rcv+0x455/0x6e0
[ 286.497945][ C0] ? __pfx_ip_rcv+0x10/0x10
[ 286.498550][ C0] ? rcu_is_watching+0x11/0xb0
[ 286.499137][ C0] ? __pfx_ip_rcv_finish+0x10/0x10
[ 286.499763][ C0] ? lock_release+0x217/0x2c0
[ 286.500327][ C0] ? dl_scaled_delta_exec+0xd1/0x2c0
[ 286.500922][ C0] ? __pfx_ip_rcv+0x10/0x10
[ 286.501480][ C0] __netif_receive_skb_one_core+0x166/0x1b0
[ 286.502173][ C0] ? __pfx___netif_receive_skb_one_core+0x10/0x10
[ 286.502903][ C0] ? lock_acquire+0x2b2/0x310
[ 286.503487][ C0] ? process_backlog+0x372/0x1350
[ 286.504087][ C0] ? lock_release+0x217/0x2c0
[ 286.504642][ C0] process_backlog+0x3b9/0x1350
[ 286.505214][ C0] ? process_backlog+0x372/0x1350
[ 286.505779][ C0] __napi_poll.constprop.0+0xa6/0x490
[ 286.506363][ C0] net_rx_action+0x92e/0xe10
[ 286.506889][ C0] ? __pfx_net_rx_action+0x10/0x10
[ 286.507437][ C0] ? timerqueue_add+0x1f0/0x320
[ 286.507977][ C0] ? sched_clock_cpu+0x68/0x540
[ 286.508492][ C0] ? lock_acquire+0x2b2/0x310
[ 286.509043][ C0] ? kvm_sched_clock_read+0xd/0x20
[ 286.509607][ C0] ? handle_softirqs+0x1aa/0x7d0
[ 286.510187][ C0] handle_softirqs+0x1f2/0x7d0
[ 286.510754][ C0] ? __pfx_handle_softirqs+0x10/0x10
[ 286.511348][ C0] ? irqtime_account_irq+0x181/0x290
[ 286.511937][ C0] ? __dev_queue_xmit+0x85d/0x3450
[ 286.512510][ C0] do_softirq.part.0+0x89/0xc0
[ 286.513100][ C0] </IRQ>
[ 286.513548][ C0] <TASK>
[ 286.513953][ C0] __local_bh_enable_ip+0x112/0x140
[ 286.514522][ C0] ? __dev_queue_xmit+0x85d/0x3450
[ 286.515072][ C0] __dev_queue_xmit+0x872/0x3450
[ 286.515619][ C0] ? nft_do_chain+0xe16/0x15b0 [nf_tables]
[ 286.516252][ C0] ? __pfx___dev_queue_xmit+0x10/0x10
[ 286.516817][ C0] ? selinux_ip_postroute+0x43c/0xc50
[ 286.517433][ C0] ? __pfx_selinux_ip_postroute+0x10/0x10
[ 286.518061][ C0] ? rcu_is_watching+0x11/0xb0
[ 286.518606][ C0] ? ip_output+0x164/0x4a0
[ 286.519149][ C0] ? rcu_is_watching+0x11/0xb0
[ 286.519671][ C0] ? ip_finish_output2+0x17d5/0x1fb0
[ 286.520258][ C0] ip_finish_output2+0xb4b/0x1fb0
[ 286.520787][ C0] ? __pfx_ip_finish_output2+0x10/0x10
[ 286.521355][ C0] ? __ip_finish_output+0x15d/0x750
[ 286.521890][ C0] ip_output+0x164/0x4a0
[ 286.522372][ C0] ? __pfx_ip_output+0x10/0x10
[ 286.522872][ C0] ? rcu_is_watching+0x11/0xb0
[ 286.523402][ C0] ? _raw_spin_unlock_irqrestore+0x4c/0x60
[ 286.524031][ C0] ? __pfx_ip_finish_output+0x10/0x10
[ 286.524605][ C0] ? __ip_queue_xmit+0x999/0x2260
[ 286.525200][ C0] ? rcu_is_watching+0x11/0xb0
[ 286.525744][ C0] ? ipv4_dst_check+0x16a/0x2b0
[ 286.526279][ C0] ? lock_release+0x217/0x2c0
[ 286.526793][ C0] __ip_queue_xmit+0x1883/0x2260
[ 286.527324][ C0] ? __skb_clone+0x54c/0x730
[ 286.527827][ C0] __tcp_transmit_skb+0x209b/0x37a0
[ 286.528374][ C0] ? __pfx___tcp_transmit_skb+0x10/0x10
[ 286.528952][ C0] ? rcu_is_watching+0x11/0xb0
[ 286.529472][ C0] ? seqcount_lockdep_reader_access.constprop.0+0x82/0x90
[ 286.530152][ C0] ? trace_hardirqs_on+0x12/0x120
[ 286.530691][ C0] tcp_write_xmit+0xb81/0x88b0
[ 286.531224][ C0] ? mod_memcg_state+0x4d/0x60
[ 286.531736][ C0] ? rcu_is_watching+0x11/0xb0
[ 286.532253][ C0] __tcp_push_pending_frames+0x90/0x320
[ 286.532826][ C0] tcp_send_fin+0x141/0xb50
[ 286.533352][ C0] ? __pfx_tcp_send_fin+0x10/0x10
[ 286.533908][ C0] ? __local_bh_enable_ip+0xab/0x140
[ 286.534495][ C0] inet_shutdown+0x243/0x320
[ 286.535077][ C0] nvme_tcp_alloc_queue+0xb3b/0x2590 [nvme_tcp]
[ 286.535709][ C0] ? do_raw_spin_lock+0x129/0x260
[ 286.536314][ C0] ? __pfx_nvme_tcp_alloc_queue+0x10/0x10 [nvme_tcp]
[ 286.536996][ C0] ? do_raw_spin_unlock+0x54/0x1e0
[ 286.537550][ C0] ? _raw_spin_unlock+0x29/0x50
[ 286.538127][ C0] ? do_raw_spin_lock+0x129/0x260
[ 286.538664][ C0] ? __pfx_do_raw_spin_lock+0x10/0x10
[ 286.539249][ C0] ? nvme_tcp_alloc_admin_queue+0xd5/0x340 [nvme_tcp]
[ 286.539892][ C0] ? __wake_up+0x40/0x60
[ 286.540392][ C0] nvme_tcp_alloc_admin_queue+0xd5/0x340 [nvme_tcp]
[ 286.541047][ C0] ? rcu_is_watching+0x11/0xb0
[ 286.541589][ C0] nvme_tcp_setup_ctrl+0x8b/0x7a0 [nvme_tcp]
[ 286.542254][ C0] ? _raw_spin_unlock_irqrestore+0x4c/0x60
[ 286.542887][ C0] ? __pfx_nvme_tcp_setup_ctrl+0x10/0x10 [nvme_tcp]
[ 286.543568][ C0] ? trace_hardirqs_on+0x12/0x120
[ 286.544166][ C0] ? _raw_spin_unlock_irqrestore+0x35/0x60
[ 286.544792][ C0] ? nvme_change_ctrl_state+0x196/0x2e0 [nvme_core]
[ 286.545477][ C0] nvme_tcp_create_ctrl+0x839/0xb90 [nvme_tcp]
[ 286.546126][ C0] nvmf_dev_write+0x3db/0x7e0 [nvme_fabrics]
[ 286.546775][ C0] ? rw_verify_area+0x69/0x520
[ 286.547334][ C0] vfs_write+0x218/0xe90
[ 286.547854][ C0] ? do_syscall_64+0x9f/0x190
[ 286.548408][ C0] ? trace_hardirqs_on_prepare+0xdb/0x120
[ 286.549037][ C0] ? syscall_exit_to_user_mode+0x93/0x280
[ 286.549659][ C0] ? __pfx_vfs_write+0x10/0x10
[ 286.550259][ C0] ? do_syscall_64+0x9f/0x190
[ 286.550840][ C0] ? syscall_exit_to_user_mode+0x8e/0x280
[ 286.551516][ C0] ? trace_hardirqs_on_prepare+0xdb/0x120
[ 286.552180][ C0] ? syscall_exit_to_user_mode+0x93/0x280
[ 286.552834][ C0] ? ksys_read+0xf5/0x1c0
[ 286.553386][ C0] ? __pfx_ksys_read+0x10/0x10
[ 286.553964][ C0] ksys_write+0xf5/0x1c0
[ 286.554499][ C0] ? __pfx_ksys_write+0x10/0x10
[ 286.555072][ C0] ? trace_hardirqs_on_prepare+0xdb/0x120
[ 286.555698][ C0] ? syscall_exit_to_user_mode+0x93/0x280
[ 286.556319][ C0] ? do_syscall_64+0x54/0x190
[ 286.556866][ C0] do_syscall_64+0x93/0x190
[ 286.557420][ C0] ? rcu_read_unlock+0x17/0x60
[ 286.557986][ C0] ? rcu_is_watching+0x11/0xb0
[ 286.558526][ C0] ? lock_release+0x217/0x2c0
[ 286.559087][ C0] ? rcu_is_watching+0x11/0xb0
[ 286.559659][ C0] ? count_memcg_events.constprop.0+0x4a/0x60
[ 286.560476][ C0] ? exc_page_fault+0x7a/0x110
[ 286.561064][ C0] ? rcu_is_watching+0x11/0xb0
[ 286.561647][ C0] ? lock_release+0x217/0x2c0
[ 286.562257][ C0] ? do_user_addr_fault+0x171/0xa00
[ 286.562839][ C0] ? do_user_addr_fault+0x4a2/0xa00
[ 286.563453][ C0] ? irqentry_exit_to_user_mode+0x84/0x270
[ 286.564112][ C0] ? rcu_is_watching+0x11/0xb0
[ 286.564677][ C0] ? irqentry_exit_to_user_mode+0x84/0x270
[ 286.565317][ C0] ? trace_hardirqs_on_prepare+0xdb/0x120
[ 286.565922][ C0] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 286.566542][ C0] RIP: 0033:0x7fe3c05e6504
[ 286.567102][ C0] Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d c5 8b 10 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89
[ 286.568931][ C0] RSP: 002b:00007fff76444f58 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
[ 286.569807][ C0] RAX: ffffffffffffffda RBX: 000000003b40d930 RCX: 00007fe3c05e6504
[ 286.570621][ C0] RDX: 00000000000000cf RSI: 000000003b40d930 RDI: 0000000000000003
[ 286.571443][ C0] RBP: 0000000000000003 R08: 00000000000000cf R09: 000000003b40d930
[ 286.572246][ C0] R10: 0000000000000000 R11: 0000000000000202 R12: 000000003b40cd60
[ 286.573069][ C0] R13: 00000000000000cf R14: 00007fe3c07417f8 R15: 00007fe3c073502e
[ 286.573886][ C0] </TASK>
Closes: https://lore.kernel.org/linux-nvme/5hdonndzoqa265oq3bj6iarwtfk5dewxxjtbjvn5uqnwclpwt6@a2n6w3taxxex/
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Ensure that TLS support is enabled in the kernel when
CONFIG_NVME_TARGET_TCP_TLS is enabled. Without this the code compiles,
but does not actually work unless something else enables CONFIG_TLS.
Fixes: 675b453e0241 ("nvmet-tcp: enable TLS handshake upcall")
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Ensure that TLS support is enabled in the kernel when
CONFIG_NVME_TCP_TLS is enabled. Without this the code compiles, but does
not actually work unless something else enables CONFIG_TLS.
Fixes: be8e82caa68 ("nvme-tcp: enable TLS handshake upcall")
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This patch addresses a data corruption issue observed in nvme-tcp during
testing.
In an NVMe native multipath setup, when an I/O timeout occurs, all
inflight I/Os are canceled almost immediately after the kernel socket is
shut down. These canceled I/Os are reported as host path errors,
triggering a failover that succeeds on a different path.
However, at this point, the original I/O may still be outstanding in the
host's network transmission path (e.g., the NIC’s TX queue). From the
user-space app's perspective, the buffer associated with the I/O is
considered completed since they're acked on the different path and may
be reused for new I/O requests.
Because nvme-tcp enables zero-copy by default in the transmission path,
this can lead to corrupted data being sent to the original target,
ultimately causing data corruption.
We can reproduce this data corruption by injecting delay on one path and
triggering i/o timeout.
To prevent this issue, this change ensures that all inflight
transmissions are fully completed from host's perspective before
returning from queue stop. To handle concurrent I/O timeout from multiple
namespaces under the same controller, always wait in queue stop
regardless of queue's state.
This aligns with the behavior of queue stopping in other NVMe fabric
transports.
Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver")
Signed-off-by: Michael Liang <mliang@purestorage.com>
Reviewed-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Reviewed-by: Randy Jennings <randyj@purestorage.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Michael Chan says:
====================
bnxt_en: Misc. bug fixes
This series fixes a bug in the driver initialization path, MSIX
setup sequencing issue in the FW error and AER paths, a missing
skb_mark_for_recycle() in the VLAN error path, some ethtool coredump
fixes, an ethtool selftest fix, and an ethtool register dump byte order
fix.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For version 1 register dump that includes the PCIe stats, the existing
code incorrectly assumes that all PCIe stats are 64-bit values. Fix it
by using an array containing the starting and ending index of the 32-bit
values. The loop in bnxt_get_regs() will use the array to do proper
endian swap for the 32-bit values.
Fixes: b5d600b027eb ("bnxt_en: Add support for 'ethtool -d'")
Reviewed-by: Shruti Parab <shruti.parab@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|