summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-05-27mm/z3fold: put z3fold page back into unbuddied list when reclaim or ↵Miaohe Lin
migration fails When doing z3fold page reclaim or migration, the page is removed from unbuddied list. If reclaim or migration succeeds, it's fine as page is released. But in case it fails, the page is not put back into unbuddied list now. The page will be leaked until next compaction work, reclaim or migration is done. Link: https://lkml.kernel.org/r/20220429064051.61552-7-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Vitaly Wool <vitaly.wool@konsulko.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-27revert "mm/z3fold.c: allow __GFP_HIGHMEM in z3fold_alloc"Miaohe Lin
Revert commit f1549cb5ab2b ("mm/z3fold.c: allow __GFP_HIGHMEM in z3fold_alloc"). z3fold can't support GFP_HIGHMEM page now. page_address is used directly at all places. Moreover, z3fold_header is on per cpu unbuddied list which could be accessed anytime. So we should remove the support of GFP_HIGHMEM allocation for z3fold. Link: https://lkml.kernel.org/r/20220429064051.61552-6-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Vitaly Wool <vitaly.wool@konsulko.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-27mm/z3fold: throw warning on failure of trylock_page in z3fold_allocMiaohe Lin
If trylock_page fails, the page won't be non-lru movable page. When this page is freed via free_z3fold_page, it will trigger bug on PageMovable check in __ClearPageMovable. Throw warning on failure of trylock_page to guard against such rare case just as what zsmalloc does. Link: https://lkml.kernel.org/r/20220429064051.61552-5-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Vitaly Wool <vitaly.wool@konsulko.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-27mm/z3fold: remove buggy use of stale list for allocationMiaohe Lin
Currently if z3fold couldn't find an unbuddied page it would first try to pull a page off the stale list. But this approach is problematic. If init z3fold page fails later, the page should be freed via free_z3fold_page to clean up the relevant resource instead of using __free_page directly. And if page is successfully reused, it will BUG_ON later in __SetPageMovable because it's already non-lru movable page, i.e. PAGE_MAPPING_MOVABLE is already set in page->mapping. In order to fix all of these issues, we can simply remove the buggy use of stale list for allocation because can_sleep should always be false and we never really hit the reusing code path now. Link: https://lkml.kernel.org/r/20220429064051.61552-4-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Vitaly Wool <vitaly.wool@konsulko.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-27mm/z3fold: fix possible null pointer dereferencingMiaohe Lin
alloc_slots could fail to allocate memory under heavy memory pressure. So we should check zhdr->slots against NULL to avoid future null pointer dereferencing. Link: https://lkml.kernel.org/r/20220429064051.61552-3-linmiaohe@huawei.com Fixes: fc5488651c7d ("z3fold: simplify freeing slots") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Vitaly Wool <vitaly.wool@konsulko.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-27mm/z3fold: fix sheduling while atomicMiaohe Lin
Patch series "A few fixup patches for z3fold". This series contains a few fixup patches to fix sheduling while atomic, fix possible null pointer dereferencing, fix various race conditions and so on. More details can be found in the respective changelogs. This patch (of 9): z3fold's page_lock is always held when calling alloc_slots. So gfp should be GFP_ATOMIC to avoid "scheduling while atomic" bug. Link: https://lkml.kernel.org/r/20220429064051.61552-1-linmiaohe@huawei.com Link: https://lkml.kernel.org/r/20220429064051.61552-2-linmiaohe@huawei.com Fixes: fc5488651c7d ("z3fold: simplify freeing slots") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Vitaly Wool <vitaly.wool@konsulko.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-27mm: split free page with properly free memory accounting and without raceZi Yan
In isolate_single_pageblock(), free pages are checked without holding zone lock, but they can go away in split_free_page() when zone lock is held. Check the free page and its order again in split_free_page() when zone lock is held. Recheck the page if the free page is gone under zone lock. In addition, in split_free_page(), the free page was deleted from the page list without changing free page accounting. Add the missing free page accounting code. Fix the type of order parameter in split_free_page(). Link: https://lore.kernel.org/lkml/20220525103621.987185e2ca0079f7b97b856d@linux-foundation.org/ Link: https://lkml.kernel.org/r/20220526231531.2404977-2-zi.yan@sent.com Fixes: b2c9e2fbba32 ("mm: make alloc_contig_range work at pageblock granularity") Signed-off-by: Zi Yan <ziy@nvidia.com> Reported-by: Doug Berger <opendmb@gmail.com> Link: https://lore.kernel.org/linux-mm/c3932a6f-77fe-29f7-0c29-fe6b1c67ab7b@gmail.com/ Cc: David Hildenbrand <david@redhat.com> Cc: Qian Cai <quic_qiancai@quicinc.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Eric Ren <renzhengeek@gmail.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Michael Walle <michael@walle.cc> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-27mm: page-isolation: skip isolated pageblock in start_isolate_page_range()Zi Yan
start_isolate_page_range() first isolates the first and the last pageblocks in the range and ensure pages across range boundaries are split during isolation. But it missed the case when the range is <= a pageblock and the first and the last pageblocks are the same one, so the second isolate_single_pageblock() will always fail. To fix it, skip the pageblock isolation in second isolate_single_pageblock(). Link: https://lkml.kernel.org/r/20220526231531.2404977-1-zi.yan@sent.com Fixes: 88ee134320b8 ("mm: fix a potential infinite loop in start_isolate_page_range()") Signed-off-by: Zi Yan <ziy@nvidia.com> Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/linux-mm/ac65adc0-a7e4-cdfe-a0d8-757195b86293@samsung.com/ Reported-by: Michael Walle <michael@walle.cc> Tested-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/linux-mm/8ca048ca8b547e0dd1c95387ee05c23d@walle.cc/ Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David Hildenbrand <david@redhat.com> Cc: Doug Berger <opendmb@gmail.com> Cc: Eric Ren <renzhengeek@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Mike Rapoport <rppt@kernel.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: Qian Cai <quic_qiancai@quicinc.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-27tools arch x86: Sync the msr-index.h copy with the kernel sourcesArnaldo Carvalho de Melo
To pick up the changes in: db1af12929c99d15 ("x86/msr-index: Define INTEGRITY_CAPABILITIES MSR") 089be16d5992dd0b ("x86/msr: Add PerfCntrGlobal* registers") f52ba93190457aa2 ("tools/power turbostat: Add Power Limit4 support") Addressing these tools/perf build warnings: diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h' That makes the beautification scripts to pick some new entries: $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after $ diff -u before after --- before 2022-05-26 12:50:01.228612839 -0300 +++ after 2022-05-26 12:50:07.699776166 -0300 @@ -116,6 +116,7 @@ [0x0000026f] = "MTRRfix4K_F8000", [0x00000277] = "IA32_CR_PAT", [0x00000280] = "IA32_MC0_CTL2", + [0x000002d9] = "INTEGRITY_CAPS", [0x000002ff] = "MTRRdefType", [0x00000309] = "CORE_PERF_FIXED_CTR0", [0x0000030a] = "CORE_PERF_FIXED_CTR1", @@ -176,6 +177,7 @@ [0x00000586] = "IA32_RTIT_ADDR3_A", [0x00000587] = "IA32_RTIT_ADDR3_B", [0x00000600] = "IA32_DS_AREA", + [0x00000601] = "VR_CURRENT_CONFIG", [0x00000606] = "RAPL_POWER_UNIT", [0x0000060a] = "PKGC3_IRTL", [0x0000060b] = "PKGC6_IRTL", @@ -260,6 +262,10 @@ [0xc0000102 - x86_64_specific_MSRs_offset] = "KERNEL_GS_BASE", [0xc0000103 - x86_64_specific_MSRs_offset] = "TSC_AUX", [0xc0000104 - x86_64_specific_MSRs_offset] = "AMD64_TSC_RATIO", + [0xc000010f - x86_64_specific_MSRs_offset] = "AMD_DBG_EXTN_CFG", + [0xc0000300 - x86_64_specific_MSRs_offset] = "AMD64_PERF_CNTR_GLOBAL_STATUS", + [0xc0000301 - x86_64_specific_MSRs_offset] = "AMD64_PERF_CNTR_GLOBAL_CTL", + [0xc0000302 - x86_64_specific_MSRs_offset] = "AMD64_PERF_CNTR_GLOBAL_STATUS_CLR", }; #define x86_AMD_V_KVM_MSRs_offset 0xc0010000 @@ -318,4 +324,5 @@ [0xc00102b4 - x86_AMD_V_KVM_MSRs_offset] = "AMD_CPPC_STATUS", [0xc00102f0 - x86_AMD_V_KVM_MSRs_offset] = "AMD_PPIN_CTL", [0xc00102f1 - x86_AMD_V_KVM_MSRs_offset] = "AMD_PPIN", + [0xc0010300 - x86_AMD_V_KVM_MSRs_offset] = "AMD_SAMP_BR_FROM", }; $ Now one can trace systemwide asking to see backtraces to where those MSRs are being read/written, see this example with a previous update: # perf trace -e msr:*_msr/max-stack=32/ --filter="msr>=IA32_U_CET && msr<=IA32_INT_SSP_TAB" ^C# If we use -v (verbose mode) we can see what it does behind the scenes: # perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr>=IA32_U_CET && msr<=IA32_INT_SSP_TAB" Using CPUID AuthenticAMD-25-21-0 0x6a0 0x6a8 New filter for msr:read_msr: (msr>=0x6a0 && msr<=0x6a8) && (common_pid != 597499 && common_pid != 3313) 0x6a0 0x6a8 New filter for msr:write_msr: (msr>=0x6a0 && msr<=0x6a8) && (common_pid != 597499 && common_pid != 3313) mmap size 528384B ^C# Example with a frequent msr: # perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr==IA32_SPEC_CTRL" --max-events 2 Using CPUID AuthenticAMD-25-21-0 0x48 New filter for msr:read_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841) 0x48 New filter for msr:write_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841) mmap size 528384B Looking at the vmlinux_path (8 entries long) symsrc__init: build id mismatch for vmlinux. Using /proc/kcore for kernel data Using /proc/kallsyms for symbols 0.000 Timer/2525383 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6) do_trace_write_msr ([kernel.kallsyms]) do_trace_write_msr ([kernel.kallsyms]) __switch_to_xtra ([kernel.kallsyms]) __switch_to ([kernel.kallsyms]) __schedule ([kernel.kallsyms]) schedule ([kernel.kallsyms]) futex_wait_queue_me ([kernel.kallsyms]) futex_wait ([kernel.kallsyms]) do_futex ([kernel.kallsyms]) __x64_sys_futex ([kernel.kallsyms]) do_syscall_64 ([kernel.kallsyms]) entry_SYSCALL_64_after_hwframe ([kernel.kallsyms]) __futex_abstimed_wait_common64 (/usr/lib64/libpthread-2.33.so) 0.030 :0/0 msr:write_msr(msr: IA32_SPEC_CTRL, val: 2) do_trace_write_msr ([kernel.kallsyms]) do_trace_write_msr ([kernel.kallsyms]) __switch_to_xtra ([kernel.kallsyms]) __switch_to ([kernel.kallsyms]) __schedule ([kernel.kallsyms]) schedule_idle ([kernel.kallsyms]) do_idle ([kernel.kallsyms]) cpu_startup_entry ([kernel.kallsyms]) secondary_startup_64_no_verify ([kernel.kallsyms]) # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Len Brown <len.brown@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Cc: Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/lkml/Yo+i%252Fj5+UtE9dcix@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-05-27perf scripts python: Support Arm CoreSight trace data disassemblyLeo Yan
This commit adds python script to parse CoreSight tracing event and print out source line and disassembly, it generates readable program execution flow for easier humans inspecting. The script receives CoreSight tracing packet with below format: +------------+------------+------------+ packet(n): | addr | ip | cpu | +------------+------------+------------+ packet(n+1): | addr | ip | cpu | +------------+------------+------------+ packet::addr presents the start address of the coming branch sample, and packet::ip is the last address of the branch smple. Therefore, a code section between branches starts from packet(n)::addr and it stops at packet(n+1)::ip. As results we combines the two continuous packets to generate the address range for instructions: [ sample(n)::addr .. sample(n+1)::ip ] The script supports both objdump or llvm-objdump for disassembly with specifying option '-d'. If doesn't specify option '-d', the script simply outputs source lines and symbols. Below shows usages with llvm-objdump or objdump to output disassembly. # perf script -s scripts/python/arm-cs-trace-disasm.py -- -d llvm-objdump-11 -k ./vmlinux ARM CoreSight Trace Data Assembler Dump ffff800008eb3198 <etm4_enable_hw>: ffff800008eb3310: c0 38 00 35 cbnz w0, 0xffff800008eb3a28 <etm4_enable_hw+0x890> ffff800008eb3314: 9f 3f 03 d5 dsb sy ffff800008eb3318: df 3f 03 d5 isb ffff800008eb331c: f5 5b 42 a9 ldp x21, x22, [sp, #32] ffff800008eb3320: fb 73 45 a9 ldp x27, x28, [sp, #80] ffff800008eb3324: e0 82 40 39 ldrb w0, [x23, #32] ffff800008eb3328: 60 00 00 34 cbz w0, 0xffff800008eb3334 <etm4_enable_hw+0x19c> ffff800008eb332c: e0 03 19 aa mov x0, x25 ffff800008eb3330: 8c fe ff 97 bl 0xffff800008eb2d60 <etm4_cs_lock.isra.0.part.0> main 6728/6728 [0004] 0.000000000 etm4_enable_hw+0x198 [kernel.kallsyms] ffff800008eb2d60 <etm4_cs_lock.isra.0.part.0>: ffff800008eb2d60: 1f 20 03 d5 nop ffff800008eb2d64: 1f 20 03 d5 nop ffff800008eb2d68: 3f 23 03 d5 hint #25 ffff800008eb2d6c: 00 00 40 f9 ldr x0, [x0] ffff800008eb2d70: 9f 3f 03 d5 dsb sy ffff800008eb2d74: 00 c0 3e 91 add x0, x0, #4016 ffff800008eb2d78: 1f 00 00 b9 str wzr, [x0] ffff800008eb2d7c: bf 23 03 d5 hint #29 ffff800008eb2d80: c0 03 5f d6 ret main 6728/6728 [0004] 0.000000000 etm4_cs_lock.isra.0.part.0+0x20 # perf script -s scripts/python/arm-cs-trace-disasm.py -- -d objdump -k ./vmlinux ARM CoreSight Trace Data Assembler Dump ffff800008eb3310 <etm4_enable_hw+0x178>: ffff800008eb3310: 350038c0 cbnz w0, ffff800008eb3a28 <etm4_enable_hw+0x890> ffff800008eb3314: d5033f9f dsb sy ffff800008eb3318: d5033fdf isb ffff800008eb331c: a9425bf5 ldp x21, x22, [sp, #32] ffff800008eb3320: a94573fb ldp x27, x28, [sp, #80] ffff800008eb3324: 394082e0 ldrb w0, [x23, #32] ffff800008eb3328: 34000060 cbz w0, ffff800008eb3334 <etm4_enable_hw+0x19c> ffff800008eb332c: aa1903e0 mov x0, x25 ffff800008eb3330: 97fffe8c bl ffff800008eb2d60 <etm4_cs_lock.isra.0.part.0> main 6728/6728 [0004] 0.000000000 etm4_enable_hw+0x198 [kernel.kallsyms] ffff800008eb2d60 <etm4_cs_lock.isra.0.part.0>: ffff800008eb2d60: d503201f nop ffff800008eb2d64: d503201f nop ffff800008eb2d68: d503233f paciasp ffff800008eb2d6c: f9400000 ldr x0, [x0] ffff800008eb2d70: d5033f9f dsb sy ffff800008eb2d74: 913ec000 add x0, x0, #0xfb0 ffff800008eb2d78: b900001f str wzr, [x0] ffff800008eb2d7c: d50323bf autiasp ffff800008eb2d80: d65f03c0 ret main 6728/6728 [0004] 0.000000000 etm4_cs_lock.isra.0.part.0+0x20 Signed-off-by: Leo Yan <leo.yan@linaro.org> Co-authored-by: Al Grant <al.grant@arm.com> Co-authored-by: Mathieu Poirier <mathieu.poirier@linaro.org> Co-authored-by: Tor Jeremiassen <tor@ti.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Eelco Chaudron <echaudro@redhat.com> Cc: German Gomez <german.gomez@arm.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Brennan <stephen.s.brennan@oracle.com> Cc: Tanmay Jagdale <tanmay@marvell.com> Cc: coresight@lists.linaro.org Cc: zengshun . wu <zengshun.wu@outlook.com> Link: https://lore.kernel.org/r/20220521130446.4163597-3-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-05-27perf scripting python: Expose dso and map informationLeo Yan
This change adds dso build_id and corresponding map's start and end address. The info of dso build_id can be used to find dso file path, and we can validate if a branch address falls into the range of map's start and end addresses. In addition, the map's start address can be used as an offset for disassembly. Signed-off-by: Leo Yan <leo.yan@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Grant <al.grant@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Eelco Chaudron <echaudro@redhat.com> Cc: German Gomez <german.gomez@arm.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Brennan <stephen.s.brennan@oracle.com> Cc: Tanmay Jagdale <tanmay@marvell.com> Cc: coresight@lists.linaro.org Cc: zengshun . wu <zengshun.wu@outlook.com> Link: https://lore.kernel.org/r/20220521130446.4163597-2-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-05-27perf jevents: Fix event syntax error caused by ExtSelZhengjun Xing
In the origin code, when "ExtSel" is 1, the eventcode will change to "eventcode |= 1 << 21”. For event “UNC_Q_RxL_CREDITS_CONSUMED_VN0.DRS", its "ExtSel" is "1", its eventcode will change from 0x1E to 0x20001E, but in fact the eventcode should <=0x1FF, so this will cause the parse fail: # perf stat -e "UNC_Q_RxL_CREDITS_CONSUMED_VN0.DRS" -a sleep 0.1 event syntax error: '.._RxL_CREDITS_CONSUMED_VN0.DRS' \___ value too big for format, maximum is 511 On the perf kernel side, the kernel assumes the valid bits are continuous. It will adjust the 0x100 (bit 8 for perf tool) to bit 21 in HW. DEFINE_UNCORE_FORMAT_ATTR(event_ext, event, "config:0-7,21"); So the perf tool follows the kernel side and just set bit8 other than bit21. Fixes: fedb2b518239cbc0 ("perf jevents: Add support for parsing uncore json files") Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220525140410.1706851-1-zhengjun.xing@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-05-27perf tools arm64: Add support for VG registerJames Clark
Add the name of the VG register so it can be used in --user-regs The event will fail to open if the register is requested but not available so only add it to the mask if the kernel supports sve and also if it supports that specific register. Committer notes: Add conditional definition of HWCAP_SVE, as suggested by Leo Yan, to build on older systems where this is not available in the system headers. Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: James Clark <james.clark@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: German Gomez <german.gomez@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Mark Brown <broonie@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220525154114.718321-6-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-05-27mm/page_table_check: fix accessing unmapped ptepMiaohe Lin
ptep is unmapped too early, so ptep could theoretically be accessed while it's unmapped. This might become a problem if/when CONFIG_HIGHPTE becomes available on riscv. Fix it by deferring pte_unmap() until page table checking is done. [akpm@linux-foundation.org: account for ptep alteration, per Matthew] Link: https://lkml.kernel.org/r/20220526113350.30806-1-linmiaohe@huawei.com Fixes: 80110bbfbba6 ("mm/page_table_check: check entries at pmd levels") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Acked-by: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-27kexec_file: drop weak attribute from arch_kexec_apply_relocations[_add]Naveen N. Rao
Since commit d1bcae833b32f1 ("ELF: Don't generate unused section symbols") [1], binutils (v2.36+) started dropping section symbols that it thought were unused. This isn't an issue in general, but with kexec_file.c, gcc is placing kexec_arch_apply_relocations[_add] into a separate .text.unlikely section and the section symbol ".text.unlikely" is being dropped. Due to this, recordmcount is unable to find a non-weak symbol in .text.unlikely to generate a relocation record against. Address this by dropping the weak attribute from these functions. Instead, follow the existing pattern of having architectures #define the name of the function they want to override in their headers. [1] https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=d1bcae833b32f1 [akpm@linux-foundation.org: arch/s390/include/asm/kexec.h needs linux/module.h] Link: https://lkml.kernel.org/r/20220519091237.676736-1-naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-27mm/page_alloc: always attempt to allocate at least one page during bulk ↵Mel Gorman
allocation Peter Pavlisko reported the following problem on kernel bugzilla 216007. When I try to extract an uncompressed tar archive (2.6 milion files, 760.3 GiB in size) on newly created (empty) XFS file system, after first low tens of gigabytes extracted the process hangs in iowait indefinitely. One CPU core is 100% occupied with iowait, the other CPU core is idle (on 2-core Intel Celeron G1610T). It was bisected to c9fa563072e1 ("xfs: use alloc_pages_bulk_array() for buffers") but XFS is only the messenger. The problem is that nothing is waking kswapd to reclaim some pages at a time the PCP lists cannot be refilled until some reclaim happens. The bulk allocator checks that there are some pages in the array and the original intent was that a bulk allocator did not necessarily need all the requested pages and it was best to return as quickly as possible. This was fine for the first user of the API but both NFS and XFS require the requested number of pages be available before making progress. Both could be adjusted to call the page allocator directly if a bulk allocation fails but it puts a burden on users of the API. Adjust the semantics to attempt at least one allocation via __alloc_pages() before returning so kswapd is woken if necessary. It was reported via bugzilla that the patch addressed the problem and that the tar extraction completed successfully. This may also address bug 215975 but has yet to be confirmed. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216007 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215975 Link: https://lkml.kernel.org/r/20220526091210.GC3441@techsingularity.net Fixes: 387ba26fb1cb ("mm/page_alloc: add a bulk page allocator") Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Dave Chinner <dchinner@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: <stable@vger.kernel.org> [5.13+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-27hugetlb: fix huge_pmd_unshare address updateMike Kravetz
The routine huge_pmd_unshare() is passed a pointer to an address associated with an area which may be unshared. If unshare is successful this address is updated to 'optimize' callers iterating over huge page addresses. For the optimization to work correctly, address should be updated to the last huge page in the unmapped/unshared area. However, in the common case where the passed address is PUD_SIZE aligned, the address is incorrectly updated to the address of the preceding huge page. That wastes CPU cycles as the unmapped/unshared range is scanned twice. Link: https://lkml.kernel.org/r/20220524205003.126184-1-mike.kravetz@oracle.com Fixes: 39dde65c9940 ("shared page table for hugetlb page") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Muchun Song <songmuchun@bytedance.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-27md: bcache: check the return value of kzalloc() in detached_dev_do_request()Jia-Ju Bai
The function kzalloc() in detached_dev_do_request() can fail, so its return value should be checked. Fixes: bc082a55d25c ("bcache: fix inaccurate io state for detached bcache devices") Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Coly Li <colyli@suse.de> Link: https://lore.kernel.org/r/20220527152818.27545-4-colyli@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-27bcache: memset on stack variables in bch_btree_check() and ↵Coly Li
bch_sectors_dirty_init() The local variables check_state (in bch_btree_check()) and state (in bch_sectors_dirty_init()) should be fully filled by 0, because before allocating them on stack, they were dynamically allocated by kzalloc(). Signed-off-by: Coly Li <colyli@suse.de> Link: https://lore.kernel.org/r/20220527152818.27545-2-colyli@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-27selftests/bpf: fix stacktrace_build_id with missing kprobe/urandom_readSong Liu
Kernel function urandom_read is replaced with urandom_read_iter. Therefore, kprobe on urandom_read is not working any more: [root@eth50-1 bpf]# ./test_progs -n 161 test_stacktrace_build_id:PASS:skel_open_and_load 0 nsec libbpf: kprobe perf_event_open() failed: No such file or directory libbpf: prog 'oncpu': failed to create kprobe 'urandom_read+0x0' \ perf event: No such file or directory libbpf: prog 'oncpu': failed to auto-attach: -2 test_stacktrace_build_id:FAIL:attach_tp err -2 161 stacktrace_build_id:FAIL Fix this by replacing urandom_read with urandom_read_iter in the test. Fixes: 1b388e7765f2 ("random: convert to using fops->read_iter()") Reported-by: Mykola Lysenko <mykolal@fb.com> Signed-off-by: Song Liu <song@kernel.org> Acked-by: David Vernet <void@manifault.com> Link: https://lore.kernel.org/r/20220526191608.2364049-1-song@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-05-27ALSA: hda/via: Delete does not require returnXiang wangx
Void function return statements are not generally useful. Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com> Link: https://lore.kernel.org/r/20220527121059.25221-1-wangxiang@cdjrlc.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-05-27ALSA: hda/realtek: Enable 4-speaker output for Dell XPS 15 9520 laptopRik van der Kemp
The 2022-model XPS 15 appears to use the same 4-speakers-on-ALC289 audio setup as the Dell XPS 15 9510, so requires the same quirk to enable woofer output. Tested on my own 9520. [ Move the entry to the right position in the SSID order -- tiwai ] BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216035 Cc: <stable@vger.kernel.org> Signed-off-by: Rik van der Kemp <rik@upto11.nl> Link: https://lore.kernel.org/r/181056a137b.d14baf90133058.8425453735588429828@upto11.nl Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-05-27ubi: ubi_create_volume: Fix use-after-free when volume creation failedZhihao Cheng
There is an use-after-free problem for 'eba_tbl' in ubi_create_volume()'s error handling path: ubi_eba_replace_table(vol, eba_tbl) vol->eba_tbl = tbl out_mapping: ubi_eba_destroy_table(eba_tbl) // Free 'eba_tbl' out_unlock: put_device(&vol->dev) vol_release kfree(tbl->entries) // UAF Fix it by removing redundant 'eba_tbl' releasing. Fetch a reproducer in [Link]. Fixes: 493cfaeaa0c9b ("mtd: utilize new cdev_device_add helper function") Link: https://bugzilla.kernel.org/show_bug.cgi?id=215965 Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2022-05-27ubi: fastmap: Check wl_pool for free peb before wear levelingZhihao Cheng
UBI fetches free peb from wl_pool during wear leveling, so UBI should check wl_pool's empty status before wear leveling. Otherwise, UBI will miss wear leveling chances when free pebs are run out. Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2022-05-27ubi: fastmap: Fix high cpu usage of ubi_bgt by making sure wl_pool not emptyZhihao Cheng
There at least 6 PEBs reserved on UBI device: 1. EBA_RESERVED_PEBS[1] 2. WL_RESERVED_PEBS[1] 3. UBI_LAYOUT_VOLUME_EBS[2] 4. MIN_FASTMAP_RESERVED_PEBS[2] When all ubi volumes take all their PEBs, there are 3 (EBA_RESERVED_PEBS + WL_RESERVED_PEBS + MIN_FASTMAP_RESERVED_PEBS - MIN_FASTMAP_TAKEN_PEBS[1]) free PEBs. Since commit f9c34bb529975fe ("ubi: Fix producing anchor PEBs") and commit 4b68bf9a69d22dd ("ubi: Select fastmap anchor PEBs considering wear level rules") applied, there is only 1 (3 - FASTMAP_ANCHOR_PEBS[1] - FASTMAP_NEXT_ANCHOR_PEBS[1]) free PEB to fill pool and wl_pool, after filling pool, wl_pool is always empty. So, UBI could be stuck in an infinite loop: ubi_thread system_wq wear_leveling_worker <-------------------------------------------------- get_peb_for_wl | // fm_wl_pool, used = size = 0 | schedule_work(&ubi->fm_work) | | update_fastmap_work_fn | ubi_update_fastmap | ubi_refill_pools | // ubi->free_count - ubi->beb_rsvd_pebs < 5 | // wl_pool is not filled with any PEBs | schedule_erase(old_fm_anchor) | ubi_ensure_anchor_pebs | __schedule_ubi_work(wear_leveling_worker) | | __erase_worker | ensure_wear_leveling | __schedule_ubi_work(wear_leveling_worker) -------------------------- , which cause high cpu usage of ubi_bgt: top - 12:10:42 up 5 min, 2 users, load average: 1.76, 0.68, 0.27 Tasks: 123 total, 3 running, 54 sleeping, 0 stopped, 0 zombie PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1589 root 20 0 0 0 0 R 45.0 0.0 0:38.86 ubi_bgt0d 319 root 20 0 0 0 0 I 15.2 0.0 0:15.29 kworker/0:3-eve 371 root 20 0 0 0 0 I 14.9 0.0 0:12.85 kworker/3:3-eve 20 root 20 0 0 0 0 I 11.3 0.0 0:05.33 kworker/1:0-eve 202 root 20 0 0 0 0 I 11.3 0.0 0:04.93 kworker/2:3-eve In commit 4b68bf9a69d22dd ("ubi: Select fastmap anchor PEBs considering wear level rules"), there are three key changes: 1) Choose the fastmap anchor when the most free PEBs are available. 2) Enable anchor move within the anchor area again as it is useful for distributing wear. 3) Import a candidate fm anchor and check this PEB's erase count during wear leveling. If the wear leveling limit is exceeded, use the used anchor area PEB with the lowest erase count to replace it. The anchor candidate can be removed, we can check fm_anchor PEB's erase count during wear leveling. Fix it by: 1) Removing 'fm_next_anchor' and check 'fm_anchor' during wear leveling. 2) Preferentially filling one free peb into fm_wl_pool in condition of ubi->free_count > ubi->beb_rsvd_pebs, then try to reserve enough free count for fastmap non anchor pebs after the above prerequisites are met. Then, there are at least 1 PEB in pool and 1 PEB in wl_pool after calling ubi_refill_pools() with all erase works done. Fetch a reproducer in [Link]. Fixes: 4b68bf9a69d22dd ("ubi: Select fastmap anchor PEBs ... rules") Link: https://bugzilla.kernel.org/show_bug.cgi?id=215407 Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2022-05-27ubifs: Use NULL instead of using plain integer as pointerHaowen Bai
This fixes the following sparse warnings: fs/ubifs/xattr.c:680:58: warning: Using plain integer as NULL pointer Signed-off-by: Haowen Bai <baihaowen@meizu.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2022-05-27ubifs: Simplify the return expression of run_gc()Minghao Chi
Simplify the return expression. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2022-05-27jffs2: fix memory leak in jffs2_do_fill_superBaokun Li
If jffs2_iget() or d_make_root() in jffs2_do_fill_super() returns an error, we can observe the following kmemleak report: -------------------------------------------- unreferenced object 0xffff888105a65340 (size 64): comm "mount", pid 710, jiffies 4302851558 (age 58.239s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff859c45e5>] kmem_cache_alloc_trace+0x475/0x8a0 [<ffffffff86160146>] jffs2_sum_init+0x96/0x1a0 [<ffffffff86140e25>] jffs2_do_mount_fs+0x745/0x2120 [<ffffffff86149fec>] jffs2_do_fill_super+0x35c/0x810 [<ffffffff8614aae9>] jffs2_fill_super+0x2b9/0x3b0 [...] unreferenced object 0xffff8881bd7f0000 (size 65536): comm "mount", pid 710, jiffies 4302851558 (age 58.239s) hex dump (first 32 bytes): bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ backtrace: [<ffffffff858579ba>] kmalloc_order+0xda/0x110 [<ffffffff85857a11>] kmalloc_order_trace+0x21/0x130 [<ffffffff859c2ed1>] __kmalloc+0x711/0x8a0 [<ffffffff86160189>] jffs2_sum_init+0xd9/0x1a0 [<ffffffff86140e25>] jffs2_do_mount_fs+0x745/0x2120 [<ffffffff86149fec>] jffs2_do_fill_super+0x35c/0x810 [<ffffffff8614aae9>] jffs2_fill_super+0x2b9/0x3b0 [...] -------------------------------------------- This is because the resources allocated in jffs2_sum_init() are not released. Call jffs2_sum_exit() to release these resources to solve the problem. Fixes: e631ddba5887 ("[JFFS2] Add erase block summary support (mount time improvement)") Signed-off-by: Baokun Li <libaokun1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2022-05-27jffs2: Use kzalloc instead of kmalloc/memsetHaowen Bai
Use kzalloc rather than duplicating its implementation, which makes code simple and easy to understand. Signed-off-by: Haowen Bai <baihaowen@meizu.com> [rw: Fixed printk string] Signed-off-by: Richard Weinberger <richard@nod.at>
2022-05-27arm64: dts: sprd: use new 'dma-channels' propertyKrzysztof Kozlowski
The '#dma-channels' property was deprecated in favor of one defined by generic dma-common DT bindings. Add new property while keeping old one for backwards compatibility. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Baolin Wang <baolin.wang7@gmail.com> Link: https://lore.kernel.org/r/20220516142857.6419-4-krzysztof.kozlowski@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-27ARM: dts: da850: use new 'dma-channels' propertyKrzysztof Kozlowski
The '#dma-channels' property was deprecated in favor of one defined by generic dma-common DT bindings. Add new property while keeping old one for backwards compatibility. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220516142857.6419-3-krzysztof.kozlowski@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-27ARM: dts: pxa: use new 'dma-channels/requests' propertiesKrzysztof Kozlowski
The '#dma-channels' and '#dma-requests' properties were deprecated in favor of these defined by generic dma-common DT bindings. Add new properties while keeping old ones for backwards compatibility. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220516142857.6419-2-krzysztof.kozlowski@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-27soc: ixp4xx/qmgr: Fix unused match warningLinus Walleij
The kernel test robot found this inconsistency: >> drivers/soc/ixp4xx/ixp4xx-npe.c:737:34: warning: 'ixp4xx_npe_of_match' defined but not used [-Wunused-const-variable=] 737 | static const struct of_device_id ixp4xx_npe_of_match[] = { This is because the match is enclosed in the of_match_ptr() which compiles into NULL when OF is disabled and this is unnecessary. Fix it by dropping of_match_ptr() around the match. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220523085520.913217-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-27ARM: ep93xx: Make ts72xx_register_flash() staticAlexander Sverdlin
... and fix the warning/error: arch/arm/mach-ep93xx/ts72xx.c:154:13: error: no previous prototype for function 'ts72xx_register_flash' [-Werror,-Wmissing-prototypes] void __init ts72xx_register_flash(struct mtd_partition *parts, int n, ^ arch/arm/mach-ep93xx/ts72xx.c:154:1: note: declare 'static' if the function is not intended to be used outside of this translation unit void __init ts72xx_register_flash(struct mtd_partition *parts, int n, ^ static Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Link: https://lore.kernel.org/lkml/202202140141.HRZ3WZwi-lkp@intel.com/T/ Link: https://lore.kernel.org/r/20220523065616.325052-1-alexander.sverdlin@gmail.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-27ARM: configs: enable support for Kontron KSwitch D10Michael Walle
The Kontron KSwitch D10 is based on a Microchip LAN9668 SoC. It is a managed ethernet network switch with either 8 copper ports or 6 copper ports and 2 SFP cages. Enable all required kconfig symbols, either as module where possible or compiled-in where it is not possible. Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20220518141542.531148-1-michael@walle.cc' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-27Merge tag 'at91-dt-5.19-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/late AT91 DT #2 for 5.19: - at91: more DT compliance updates for RTC and RTT nodes - at91: sama7g5: add microphone support * tag 'at91-dt-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sama7g5ek: add node for PDMC0 ARM: dts: at91: sama7g5: add nodes for PDMC ARM: dts: at91: Use the generic "rtc" node name for the rtt IPs ARM: dts: at91: Add the required 'atmel, rtt-rtc-time-reg' property Link: https://lore.kernel.org/r/20220517153252.92393-1-nicolas.ferre@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-27Merge tag 'at91-soc-5.19-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/late AT91 SoC #2 for 5.19: - One Kconfig fix for random build error * tag 'at91-soc-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: at91: pm: Fix rand build error Link: https://lore.kernel.org/r/20220517150832.89451-1-nicolas.ferre@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-27ep93xx: clock: Do not return the address of the freed memoryGenjian Zhang
Avoid return freed memory addresses,Modified to the actual error return value of clk_register(). Fixes: 9645ccc7bd7a ("ep93xx: clock: convert in-place to COMMON_CLK") Signed-off-by: Genjian Zhang <zhanggenjian@kylinos.cn> Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-27Merge branch 'hpe/gxp-soc' into arm/lateArnd Bergmann
Patch series from Nick Hawkins: "The GXP is the HPE BMC SoC that is used in the majority of HPE current generation servers. Traditionally the asic will last multiple generations of server before being replaced. Info about SoC: HPE GXP is the name of the HPE Soc. This SoC is used to implement many BMC features at HPE. It supports ARMv7 architecture based on the Cortex A9 core. It is capable of using an AXI bus to which a memory controller is attached. It has multiple SPI interfaces to connect boot flash and BIOS flash. It uses a 10/100/1000 MAC for network connectivity. It has multiple i2c engines to drive connectivity with a host infrastructure. The initial patches enable the watchdog and timer enabling the host to be able to boot." * hpe/gxp-soc: MAINTAINERS: Introduce HPE GXP Architecture ARM: dts: Introduce HPE GXP Device tree dt-bindings: arm: hpe: add GXP Support dt-bindings: timer: hpe,gxp-timer: Add HPE GXP Timer and Watchdog clocksource/drivers/timer-gxp: Add HPE GXP Timer watchdog: hpe-wdt: Introduce HPE GXP Watchdog ARM: configs: multi_v7_defconfig: Add HPE GXP ARCH ARM: hpe: Introduce the HPE GXP architecture Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-27block, loop: support partitions without scanningChristoph Hellwig
Historically we did distinguish between a flag that surpressed partition scanning, and a combinations of the minors variable and another flag if any partitions were supported. This was generally confusing and doesn't make much sense, but some corner case uses of the loop driver actually do want to support manually added partitions on a device that does not actively scan for partitions. To make things worsee the loop driver also wants to dynamically toggle the scanning for partitions on a live gendisk, which makes the disk->flags updates non-atomic. Introduce a new GD_SUPPRESS_PART_SCAN bit in disk->state that disables just scanning for partitions, and toggle that instead of GENHD_FL_NO_PART in the loop driver. Fixes: 1ebe2e5f9d68 ("block: remove GENHD_FL_EXT_DEVT") Reported-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220527055806.1972352-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-27powerpc/64: Include cache.h directly in paca.hMichael Ellerman
paca.h uses ____cacheline_aligned without directly including cache.h, where it's defined. For Book3S builds that's OK because paca.h includes lppaca.h, and it does include cache.h. But Book3E builds have been getting cache.h indirectly via printk.h, which is dicey, and in fact that include was recently removed, leading to build errors such as: ld: fs/isofs/dir.o:(.bss+0x0): multiple definition of `____cacheline_aligned'; fs/isofs/namei.o:(.bss+0x0): first defined here So include cache.h directly to fix the build error. Fixes: 534aa1dc975a ("printk: stop including cache.h from printk.h") Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2022-05-27net: usb: qmi_wwan: add Telit 0x1250 compositionCarlo Lobrano
Add support for Telit LN910Cx 0x1250 composition 0x1250: rmnet, tty, tty, tty, tty Signed-off-by: Carlo Lobrano <c.lobrano@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-27net: lan743x: PCI11010 / PCI11414 fixRaju Lakkaraju
Fix the MDIO interface declarations to reflect what is currently supported by the PCI11010 / PCI11414 devices (C22 for RGMII and C22_C45 for SGMII) Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-27Revert "printk: wake up all waiters"John Ogness
This reverts commit 938ba4084abcf6fdd21d9078513c52f8fb9b00d0. The wait queue @log_wait never has exclusive waiters, so there is no need to use wake_up_interruptible_all(). Using wake_up_interruptible() was the correct function to wake all waiters. Since there are no exclusive waiters, erroneously changing wake_up_interruptible() to wake_up_interruptible_all() did not result in any behavior change. However, using wake_up_interruptible_all() on a wait queue without exclusive waiters is fundamentally wrong. Go back to using wake_up_interruptible() to wake all waiters. Signed-off-by: John Ogness <john.ogness@linutronix.de> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20220526203056.81123-1-john.ogness@linutronix.de
2022-05-27x86/extable: Annotate ex_handler_msr_mce() as a dead endBorislav Petkov
Fix vmlinux.o: warning: objtool: fixup_exception+0x2d6: unreachable instruction Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20220520192729.23969-1-bp@alien8.de
2022-05-27context_tracking: Always inline empty stubsPeter Zijlstra
Because GCC is seriously challenged.. vmlinux.o: warning: objtool: enter_from_user_mode+0x85: call to context_tracking_enabled() leaves .noinstr.text section vmlinux.o: warning: objtool: syscall_enter_from_user_mode+0x8f: call to context_tracking_enabled() leaves .noinstr.text section vmlinux.o: warning: objtool: syscall_enter_from_user_mode_prepare+0x85: call to context_tracking_enabled() leaves .noinstr.text section vmlinux.o: warning: objtool: irqentry_enter_from_user_mode+0x85: call to context_tracking_enabled() leaves .noinstr.text section Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Link: https://lkml.kernel.org/r/20220526105958.134113388@infradead.org
2022-05-27x86: Always inline on_thread_stack() and current_top_of_stack()Peter Zijlstra
Becaues GCC clearly lost it's marbles again... vmlinux.o: warning: objtool: enter_from_user_mode+0x4e: call to on_thread_stack() leaves .noinstr.text section vmlinux.o: warning: objtool: syscall_enter_from_user_mode+0x53: call to on_thread_stack() leaves .noinstr.text section vmlinux.o: warning: objtool: syscall_enter_from_user_mode_prepare+0x4e: call to on_thread_stack() leaves .noinstr.text section vmlinux.o: warning: objtool: irqentry_enter_from_user_mode+0x4e: call to on_thread_stack() leaves .noinstr.text section vmlinux.o: warning: objtool: enter_from_user_mode+0x4e: call to current_top_of_stack() leaves .noinstr.text section vmlinux.o: warning: objtool: syscall_enter_from_user_mode+0x53: call to current_top_of_stack() leaves .noinstr.text section vmlinux.o: warning: objtool: syscall_enter_from_user_mode_prepare+0x4e: call to current_top_of_stack() leaves .noinstr.text section vmlinux.o: warning: objtool: irqentry_enter_from_user_mode+0x4e: call to current_top_of_stack() leaves .noinstr.text section Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20220526105958.071435483@infradead.org
2022-05-27jump_label,noinstr: Avoid instrumentation for JUMP_LABEL=n buildsPeter Zijlstra
When building x86_64 with JUMP_LABEL=n it's possible for instrumentation to sneak into noinstr: vmlinux.o: warning: objtool: exit_to_user_mode+0x14: call to static_key_count.constprop.0() leaves .noinstr.text section vmlinux.o: warning: objtool: syscall_exit_to_user_mode+0x2d: call to static_key_count.constprop.0() leaves .noinstr.text section vmlinux.o: warning: objtool: irqentry_exit_to_user_mode+0x1b: call to static_key_count.constprop.0() leaves .noinstr.text section Switch to arch_ prefixed atomic to avoid the explicit instrumentation. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2022-05-27x86/cpu: Elide KCSAN for cpu_has() and friendsPeter Zijlstra
As x86 uses the <asm-generic/bitops/instrumented-*.h> headers, the regular forms of all bitops are instrumented with explicit calls to KASAN and KCSAN checks. As these are explicit calls, these are not suppressed by the noinstr function attribute. This can result in calls to those check functions in noinstr code, which objtool warns about: vmlinux.o: warning: objtool: enter_from_user_mode+0x24: call to __kcsan_check_access() leaves .noinstr.text section vmlinux.o: warning: objtool: syscall_enter_from_user_mode+0x28: call to __kcsan_check_access() leaves .noinstr.text section vmlinux.o: warning: objtool: syscall_enter_from_user_mode_prepare+0x24: call to __kcsan_check_access() leaves .noinstr.text section vmlinux.o: warning: objtool: irqentry_enter_from_user_mode+0x24: call to __kcsan_check_access() leaves .noinstr.text section Prevent this by using the arch_*() bitops, which are the underlying bitops without explciit instrumentation. [null: Changelog] Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20220502111216.290518605@infradead.org
2022-05-27objtool: Mark __ubsan_handle_builtin_unreachable() as noreturnPeter Zijlstra
fs/ntfs3/ntfs3.prelink.o: warning: objtool: ni_read_frame() falls through to next function ni_readpage_cmpr.cold() That is in fact: 000000000000124a <ni_read_frame.cold>: 124a: 44 89 e0 mov %r12d,%eax 124d: 0f b6 55 98 movzbl -0x68(%rbp),%edx 1251: 48 c7 c7 00 00 00 00 mov $0x0,%rdi 1254: R_X86_64_32S .data+0x1380 1258: 48 89 c6 mov %rax,%rsi 125b: e8 00 00 00 00 call 1260 <ni_read_frame.cold+0x16> 125c: R_X86_64_PLT32 __ubsan_handle_shift_out_of_bounds-0x4 1260: 48 8d 7d cc lea -0x34(%rbp),%rdi 1264: e8 00 00 00 00 call 1269 <ni_read_frame.cold+0x1f> 1265: R_X86_64_PLT32 __tsan_read4-0x4 1269: 8b 45 cc mov -0x34(%rbp),%eax 126c: e9 00 00 00 00 jmp 1271 <ni_read_frame.cold+0x27> 126d: R_X86_64_PC32 .text+0x19109 1271: 48 8b 75 a0 mov -0x60(%rbp),%rsi 1275: 48 63 d0 movslq %eax,%rdx 1278: 48 c7 c7 00 00 00 00 mov $0x0,%rdi 127b: R_X86_64_32S .data+0x13a0 127f: 89 45 88 mov %eax,-0x78(%rbp) 1282: e8 00 00 00 00 call 1287 <ni_read_frame.cold+0x3d> 1283: R_X86_64_PLT32 __ubsan_handle_shift_out_of_bounds-0x4 1287: 8b 45 88 mov -0x78(%rbp),%eax 128a: e9 00 00 00 00 jmp 128f <ni_read_frame.cold+0x45> 128b: R_X86_64_PC32 .text+0x19098 128f: 48 c7 c7 00 00 00 00 mov $0x0,%rdi 1292: R_X86_64_32S .data+0x11f0 1296: e8 00 00 00 00 call 129b <ni_readpage_cmpr.cold> 1297: R_X86_64_PLT32 __ubsan_handle_builtin_unreachable-0x4 000000000000129b <ni_readpage_cmpr.cold>: Tell objtool that __ubsan_handle_builtin_unreachable() is a noreturn. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20220502091514.GB479834@worktop.programming.kicks-ass.net
generated by cgit (git 2.34.1) at 2025-07-19 17:31:44 +0000