| Age | Commit message (Collapse) | Author |
|---|
|
This patch add the ROCE supported flag in the driver_data
field of pci_device_id, delete roce_pci_tbl and change
HNAE_DEV_SUPPORT_ROCE_B to HNAE3_DEV_SUPPORT_ROCE_B.
This cleanup is done in order to support adding capability
in pci_device_id and to fix initialization failure when
cmd is not supported.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains two Netfilter fixes for your net tree,
they are:
1) Fix NAt compilation with UP, from Geert Uytterhoeven.
2) Fix incorrect number of entries when dumping a set, from
Vishwanath Pai.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In isdn_ppp_write(), the header (i.e., protobuf) of the buffer is
fetched twice from userspace. The first fetch is used to peek at the
protocol of the message and reset the huptimer if necessary; while the
second fetch copies in the whole buffer. However, given that buf resides
in userspace memory, a user process can race to change its memory content
across fetches. By doing so, we can either avoid resetting the huptimer
for any type of packets (by first setting proto to PPP_LCP and later
change to the actual type) or force resetting the huptimer for LCP
packets.
This patch changes this double-fetch behavior into two single fetches
decided by condition (lp->isdn_device < 0 || lp->isdn_channel <0).
A more detailed discussion can be found at
https://marc.info/?l=linux-kernel&m=150586376926123&w=2
Signed-off-by: Meng Xu <mengxu.gatech@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
fec_ptp_check_pps_event will return 1 if FEC_T_TF_MASK caused
an interrupt. Don't return IRQ_NONE in this case.
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
FEC_ENET_TS_TIMER is not checked in the interrupt routine
so there is no need to enable it.
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Before queue 0 was always checked if any queue caused an interrupt.
It is better to just mark queue 0 if queue 0 has caused an interrupt.
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Fugang Duan <Fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since XDP's view of the packet includes the MAC header, moving the start-
of-packet with bpf_xdp_adjust_head needs to also update the offset of the
MAC header (which is relative to skb->head, not to the skb->data that was
changed).
Without this, tcpdump sees packets starting from the old MAC header rather
than the new one, at least in my tests on the loopback device.
Fixes: b5cdae3291f7 ("net: Generic XDP")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The actual length of cmsg fetched in during the second loop
(i.e., kcmsg - kcmsg_base) could be different from what we
get from the first loop (i.e., kcmlen).
The main reason is that the two get_user() calls in the two
loops (i.e., get_user(ucmlen, &ucmsg->cmsg_len) and
__get_user(ucmlen, &ucmsg->cmsg_len)) could cause ucmlen
to have different values even they fetch from the same userspace
address, as user can race to change the memory content in
&ucmsg->cmsg_len across fetches.
Although in the second loop, the sanity check
if ((char *)kcmsg_base + kcmlen - (char *)kcmsg < CMSG_ALIGN(tmp))
is inplace, it only ensures that the cmsg fetched in during the
second loop does not exceed the length of kcmlen, but not
necessarily equal to kcmlen. But indicated by the assignment
kmsg->msg_controllen = kcmlen, we should enforce that.
This patch adds this additional sanity check and ensures that
what is recorded in kmsg->msg_controllen is the actual cmsg length.
Signed-off-by: Meng Xu <mengxu.gatech@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
- fix suspend/resume issues.
- fix memory corruption detected by kasan.
- fix build error on x86.
* tag 'exynos-drm-fixes-for-v4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm/exynos/hdmi: Fix unsafe list iteration
drm: exynos: include linux/irq.h
drm/exynos: Fix suspend/resume support
drm/exynos: Fix locking in the suspend/resume paths
|
|
git://anongit.freedesktop.org/git/drm-intel into drm-fixes
drm/i915 fixes for 4.14-rc1
Couple fixes for stable:
- Fix MIPI panels on BXT.
- Fix PCI BARs information on GVT.
Plus other fixes:
- Fix minimal brightness for BXT, GLK, CFL and CNL.
- Fix compilation warning: unused in_vbl
- Fix error handling in intel_framebuffer_init
* tag 'drm-intel-fixes-2017-09-20' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: Remove unused 'in_vbl' from i915_get_crtc_scanoutpos()
drm/i915/cnp: set min brightness from VBT
Revert "drm/i915/bxt: Disable device ready before shutdown command"
drm/i915/bxt: set min brightness from VBT
drm/i915: Fix an error handling in 'intel_framebuffer_init()'
drm/i915/gvt: Fix incorrect PCI BARs reporting
|
|
We were not displaying some key fields (session status and capabilities and
whether guest authenticated) for SMB2/SMB3 session in /proc/fs/cifs/DebugData.
This is needed for real world triage of problems with the (now much more
common) SMB3 mounts.
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
This patch fixes a bug exhibited by the following scenario:
1. fd1 = perf_event_open with attr.config = ID1
2. attach bpf program prog1 to fd1
3. fd2 = perf_event_open with attr.config = ID1
<this will be successful>
4. user program closes fd2 and prog1 is detached from the tracepoint.
5. user program with fd1 does not work properly as tracepoint
no output any more.
The issue happens at step 4. Multiple perf_event_open can be called
successfully, but only one bpf prog pointer in the tp_event. In the
current logic, any fd release for the same tp_event will free
the tp_event->prog.
The fix is to free tp_event->prog only when the closing fd
corresponds to the one which registered the program.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Packet socket bind operations must hold the po->bind_lock. This keeps
po->running consistent with whether the socket is actually on a ptype
list to receive packets.
fanout_add unbinds a socket and its packet_rcv/tpacket_rcv call, then
binds the fanout object to receive through packet_rcv_fanout.
Make it hold the po->bind_lock when testing po->running and rebinding.
Else, it can race with other rebind operations, such as that in
packet_set_ring from packet_rcv to tpacket_rcv. Concurrent updates
can result in a socket being added to a fanout group twice, causing
use-after-free KASAN bug reports, among others.
Reported independently by both trinity and syzkaller.
Verified that the syzkaller reproducer passes after this patch.
Fixes: dc99f600698d ("packet: Add fanout support.")
Reported-by: nixioaming <nixiaoming@huawei.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
pci_epf_test_raise_irq() reads the interrupt to use for the response from
reg->command, but this has been cleared at the beginning of the command
handler so the value is always zero at this point.
Instead, extract the interrupt index before handling the command and then
pass the requested interrupt into pci_epf_test_raise_irq(). This allows us
to remove the specific code to extract the interrupt for
COMMAND_RAISE_MSI_IRQ since it is now handled in common code.
Fixes: 3ecf3232c54c ("PCI: endpoint: Do not reset *command* inadvertently")
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"This includes three minor fixes.
- Have writing to trace file clear the irqsoff (and friends) tracer
- trace_pipe behavior for instance buffers was different than top
buffer
- Show a message of why mmiotrace doesn't start from commandline"
* tag 'trace-v4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix trace_pipe behavior for instance traces
tracing: Ignore mmiotrace from kernel commandline
tracing: Erase irqsoff trace with empty write
|
|
Update dtx_diff include paths in the same manner as:
commit b12869a8d519 ("of: remove drivers/of/testcase-data from
include search path for CPP"), commit 5ffa2aed389c ("of: remove
arch/$(SRCARCH)/boot/dts from include search path for CPP"), and
commit 50f9ddaf64e1 ("of: search scripts/dtc/include-prefixes path
for both CPP and DTC").
Remove proposed include path kernel/dts/, which was never implemented
for the dtb build.
For the diff case, each source file is compiled separately. For
each of those compiles, provide the location of the source file
as an include path, not the location of both source files.
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The "Release:" field of the spec file is determined based on the
.version file.
However, the .version file is not copied to the source tar file.
So, when we build the kernel from the source package, the UTS_VERSION
always indicates #1. This does not match with "rpm -q".
The kernel UTS_VERSION and "rpm -q" do not agree for binrpm-pkg, either.
Please note the kernel has already been built before the spec file is
created. Currently, mkspec invokes mkversion. This script returns an
incremented version. So, the "Release:" field of the spec file is
greater than the version in the kernel by one.
For the source package build (where .version file is missing), we can
give KBUILD_BUILD_VERSION=%{release} to the build command.
For the binary package build, we can simply read out the .version file
because it contains the version number that was used for building the
kernel image.
We can remove scripts/mkversion because scripts/package/Makefile need
not touch the .version file.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
Commit 5620a0d1aacd ("firmware: delete in-kernel firmware") deleted
in-kernel firmware support, including the firmware install command.
So, the firmware package does not make sense any more. Remove it.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Riku Voipio <riku.voipio@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 5620a0d1aacd ("firmware: delete in-kernel firmware") deleted
in-kernel firmware support, including "make firmware_install".
Since then, "make rpm-pkg" / "make binrpm-pkg" fails to build with
the error:
make[2]: *** No rule to make target `firmware_install'. Stop.
Commit df85b2d767aa ("firmware: Restore support for built-in firmware")
restored the build infrastructure for CONFIG_EXTRA_FIRMWARE, but this
is out of the scope of "make firmware_install". So, the right thing to
do is to kill the use of "make firmware_install".
Fixes: 5620a0d1aacd ("firmware: delete in-kernel firmware")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a new sysctl file /proc/sys/s390/topology which displays if
topology is on (1) or off (0) as specified by the "topology=" kernel
parameter.
This allows to change topology information during runtime and
configuring it via /etc/sysctl.conf instead of using the kernel line
parameter.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
If running on machines that do not provide topology information we
currently generate a "fake" topology which defines the maximum
distance between each cpu: each cpu will be put into an own drawer.
Historically this used to be the best option for (virtual) machines in
overcommited hypervisors.
For some workloads however it is better to generate a different
topology where all cpus are siblings within a package (all cpus are
core siblings). This shows performance improvements of up to 10%,
depending on the workload.
In order to keep the current behaviour, but also allow to switch to
the different core sibling topology use the existing "topology="
kernel parameter:
Specifying "topology=on" on machines without topology information will
generate the core siblings (fake) topology information, instead of the
default topology information where all cpus have the maximum distance.
On machines which provide topology information specifying
"topology=on" does not have any effect.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Optprobes depended on an updated regs->nip from analyse_instr() to
identify the location to branch back from the optprobes trampoline.
However, since commit 3cdfcbfd32b9d ("powerpc: Change analyse_instr so
it doesn't modify *regs"), analyse_instr() doesn't update the registers
anymore. Due to this, we end up branching back from the optprobes
trampoline to the same branch into the trampoline resulting in a loop.
Fix this by calling out to emulate_update_regs() before using the nip.
Additionally, explicitly compare the return value from analyse_instr()
to 1, rather than just checking for !0 so as to guard against any
future changes to analyse_instr() that may result in -1 being returned
in more scenarios.
Fixes: 3cdfcbfd32b9d ("powerpc: Change analyse_instr so it doesn't modify *regs")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linux into fixes
Merge one commit from Scott which I missed while away.
|
|
When two adjacent TX SGL are processed and parts of both TX SGLs
are pulled into the per-request TX SGL, the wrong per-request
TX SGL entries were updated.
This fixes a NULL pointer dereference when a cipher implementation walks
the TX SGL where some of the SGL entries were NULL.
Fixes: e870456d8e7c ("crypto: algif_skcipher - overhaul memory...")
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When built using multi_v7_defconfig, driver does not work on LS1021A:
[...]
caam 1700000.crypto: can't identify CAAM ipg clk: -2
caam: probe of 1700000.crypto failed with error -2
[...]
It turns out we have to detect at runtime whether driver is running
on an i.MX platform or not.
Cc: <stable@vger.kernel.org>
Fixes: 6c3af9559352 ("crypto: caam - add support for LS1021A")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
All older compiler versions up to gcc-4.9 produce these
harmless warnings:
drivers/crypto/inside-secure/safexcel_cipher.c:389:9: warning: missing braces around initializer [-Wmissing-braces]
drivers/crypto/inside-secure/safexcel_cipher.c:389:9: warning: (near initialization for ‘result.completion’) [-Wmissing-braces]
drivers/crypto/inside-secure/safexcel_hash.c:422:9: warning: missing braces around initializer [-Wmissing-braces]
drivers/crypto/inside-secure/safexcel_hash.c:422:9: warning: (near initialization for ‘result.completion’) [-Wmissing-braces]
This changes the syntax to something that works on all versions
without warnings.
Fixes: 1b44c5a60c13 ("crypto: inside-secure - add SafeXcel EIP197 crypto engine driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Today, md5sum fails with error -ENOKEY because a setkey
function is set for non hmac hashing algs, see strace output below:
mmap(NULL, 378880, PROT_READ, MAP_SHARED, 6, 0) = 0x77f50000
accept(3, 0, NULL) = 7
vmsplice(5, [{"bin/\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 378880}], 1, SPLICE_F_MORE|SPLICE_F_GIFT) = 262144
splice(4, NULL, 7, NULL, 262144, SPLICE_F_MORE) = -1 ENOKEY (Required key not available)
write(2, "Generation of hash for file kcap"..., 50) = 50
munmap(0x77f50000, 378880) = 0
This patch ensures that setkey() function is set only
for hmac hashing.
Cc: <stable@vger.kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
md5sum on some files gives wrong result
Exemple:
With the md5sum from libkcapi:
c15115c05bad51113f81bdaee735dd09 test
With the original md5sum:
bbdf41d80ba7e8b2b7be3a0772be76cb test
This patch fixes this issue
Cc: <stable@vger.kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Kernel crypto tests report the following error at startup
[ 2.752626] alg: hash: Test 4 failed for sha224-talitos
[ 2.757907] 00000000: 30 e2 86 e2 e7 8a dd 0d d7 eb 9f d5 83 fe f1 b0
00000010: 2d 5a 6c a5 f9 55 ea fd 0e 72 05 22
This patch fixes it
Cc: <stable@vger.kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Using RBP as a temporary register breaks frame pointer convention and
breaks stack traces when unwinding from an interrupt in the crypto code.
Use R13 instead of RBP. Both are callee-saved registers, so the
substitution is straightforward.
Reported-by: Eric Biggers <ebiggers@google.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Eric Biggers <ebiggers@google.com>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Using RBP as a temporary register breaks frame pointer convention and
breaks stack traces when unwinding from an interrupt in the crypto code.
Mix things up a little bit to get rid of the RBP usage, without hurting
performance too much. Use RDI instead of RBP for the TBL pointer. That
will clobber CTX, so spill CTX onto the stack and use R12 to read it in
the outer loop. R12 is used as a non-persistent temporary variable
elsewhere, so it's safe to use.
Also remove the unused y4 variable.
Reported-by: Eric Biggers <ebiggers3@gmail.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Eric Biggers <ebiggers@google.com>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Using RBP as a temporary register breaks frame pointer convention and
breaks stack traces when unwinding from an interrupt in the crypto code.
Swap the usages of R12 and RBP. Use R12 for the TBL register, and use
RBP to store the pre-aligned stack pointer.
Reported-by: Eric Biggers <ebiggers@google.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Eric Biggers <ebiggers@google.com>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Using RBP as a temporary register breaks frame pointer convention and
breaks stack traces when unwinding from an interrupt in the crypto code.
There's no need to use RBP as a temporary register for the TBL value,
because it always stores the same value: the address of the K256 table.
Instead just reference the address of K256 directly.
Reported-by: Eric Biggers <ebiggers@google.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Eric Biggers <ebiggers@google.com>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Using RBP as a temporary register breaks frame pointer convention and
breaks stack traces when unwinding from an interrupt in the crypto code.
Swap the usages of R12 and RBP. Use R12 for the TBL register, and use
RBP to store the pre-aligned stack pointer.
Reported-by: Eric Biggers <ebiggers@google.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Eric Biggers <ebiggers@google.com>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Using RBP as a temporary register breaks frame pointer convention and
breaks stack traces when unwinding from an interrupt in the crypto code.
Swap the usages of R12 and RBP. Use R12 for the REG_D register, and use
RBP to store the pre-aligned stack pointer.
Reported-by: Eric Biggers <ebiggers@google.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Eric Biggers <ebiggers@google.com>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Using RBP as a temporary register breaks frame pointer convention and
breaks stack traces when unwinding from an interrupt in the crypto code.
Use R11 instead of RBP. Since R11 isn't a callee-saved register, it
doesn't need to be saved and restored on the stack.
Reported-by: Eric Biggers <ebiggers@google.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Eric Biggers <ebiggers@google.com>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Using RBP as a temporary register breaks frame pointer convention and
breaks stack traces when unwinding from an interrupt in the crypto code.
Use RSI instead of RBP for RT1. Since RSI is also used as a the 'dst'
function argument, it needs to be saved on the stack until the argument
is needed.
Reported-by: Eric Biggers <ebiggers@google.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Eric Biggers <ebiggers@google.com>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Using RBP as a temporary register breaks frame pointer convention and
breaks stack traces when unwinding from an interrupt in the crypto code.
Use R15 instead of RBP. R15 can't be used as the RID1 register because
of x86 instruction encoding limitations. So use R15 for CTX and RDI for
CTX. This means that CTX is no longer an implicit function argument.
Instead it needs to be explicitly copied from RDI.
Reported-by: Eric Biggers <ebiggers@google.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Eric Biggers <ebiggers@google.com>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Using RBP as a temporary register breaks frame pointer convention and
breaks stack traces when unwinding from an interrupt in the crypto code.
Use R15 instead of RBP. R15 can't be used as the RID1 register because
of x86 instruction encoding limitations. So use R15 for CTX and RDI for
CTX. This means that CTX is no longer an implicit function argument.
Instead it needs to be explicitly copied from RDI.
Reported-by: Eric Biggers <ebiggers@google.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Eric Biggers <ebiggers@google.com>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Using RBP as a temporary register breaks frame pointer convention and
breaks stack traces when unwinding from an interrupt in the crypto code.
Use R12 instead of RBP. Both are callee-saved registers, so the
substitution is straightforward.
Reported-by: Eric Biggers <ebiggers@google.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Eric Biggers <ebiggers@google.com>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Using RBP as a temporary register breaks frame pointer convention and
breaks stack traces when unwinding from an interrupt in the crypto code.
Use R12 instead of RBP. R12 can't be used as the RT0 register because
of x86 instruction encoding limitations. So use R12 for CTX and RDI for
CTX. This means that CTX is no longer an implicit function argument.
Instead it needs to be explicitly copied from RDI.
Reported-by: Eric Biggers <ebiggers@google.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Eric Biggers <ebiggers@google.com>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
During the change to use aligned buffers, the deallocation code path was
not updated correctly. The current code tries to free the aligned buffer
pointer and not the original buffer pointer as it is supposed to.
Thus, the code is updated to free the original buffer pointer and set
the aligned buffer pointer that is used throughout the code to NULL.
Fixes: 3cfc3b9721123 ("crypto: drbg - use aligned buffers")
CC: <stable@vger.kernel.org>
CC: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Commit c311c797998c ("cpumask: make "nr_cpumask_bits" unsigned")
modified mipspmu_event_init() to cast the struct perf_event cpu field to
an unsigned integer before it is compared with nr_cpumask_bits (and
*ahem* did so without copying the linux-mips mailing list or any MIPS
developers...). This is broken because the cpu field may be -1 for
events which follow a process rather than being affine to a particular
CPU. When this is the case the cast to an unsigned int results in a
value equal to ULONG_MAX, which is always greater than nr_cpumask_bits
so we always fail mipspmu_event_init() and return -ENODEV.
The check against nr_cpumask_bits seems nonsensical anyway, so this
patch simply removes it. The cpu field is going to either be -1 or a
valid CPU number. Comparing it with nr_cpumask_bits is effectively
checking that it's a valid cpu number, but it seems safe to rely on the
core perf events code to ensure that's the case.
The end result is that this fixes use of perf on MIPS when not
constraining events to a particular CPU, and fixes the "perf list hw"
command which fails to list any events without this.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: c311c797998c ("cpumask: make "nr_cpumask_bits" unsigned")
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mips@linux-mips.org
Cc: stable <stable@vger.kernel.org> # v4.12+
Patchwork: https://patchwork.linux-mips.org/patch/17323/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
It can be confusing if user ends up authenticated as guest but they
requested signing (server will return error validating signed packets)
so add log message for this.
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
|
|
Multi-dialect negotiate patch had a minor endian error.
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org> # 4.13+
|
|
Commit 24be85a23d1f ("powerpc/powernv: Clear PECE1 in LPCR via
stop-api only on Hotplug") clears the PECE1 bit of the LPCR via
stop-api during CPU-Hotplug to prevent wakeup due to a decrementer on
an offlined CPU which is in a deep stop state.
In the case where the stop-api support is found to be lacking, the
commit 785a12afdb4a ("powerpc/powernv/idle: Disable LOSE_FULL_CONTEXT
states when stop-api fails") disables deep states that lose hypervisor
context. Thus in this case, the offlined CPU will be put to some
shallow idle state.
However, we currently unconditionally clear the PECE1 in LPCR via
stop-api during CPU-Hotplug even when deep states are disabled due to
stop-api failure.
Fix this by clearing PECE1 of LPCR via stop-api during CPU-Hotplug
*only* when the offlined CPU will be put to a deep state that loses
hypervisor context.
Fixes: 24be85a23d1f ("powerpc/powernv: Clear PECE1 in LPCR via stop-api only on Hotplug")
Reported-by: Pavithra Prakash <pavirampu@linux.vnet.ibm.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Pavithra Prakash <pavrampu@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
mullw should do a 32 bit signed multiply and create a 64 bit signed
result. It currently truncates the result to 32 bits.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
mcrf broke when we changed analyse_instr() to not modify the register
state. The instruction writes to the CR, so we need to store the result
in op->ccval, not op->val.
Fixes: 3cdfcbfd32b9 ("powerpc: Change analyse_instr so it doesn't modify *regs")
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
set_cr0() broke when we changed analyse_instr() to not modify the
register state. Instead of looking at regs->gpr[x] which has not
been updated yet, we need to look at op->val.
Fixes: 3cdfcbfd32b9 ("powerpc: Change analyse_instr so it doesn't modify *regs")
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
