| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-fixes
omapdrm fixes for 4.15
* Fix platform detection issue causing OMAP3 DPI output to have missing color bits
* Fix platform detection issue causing OMAP4 HDMI audio not to work
* tag 'omapdrm-4.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
omapdrm: hdmi4_cec: signedness bug in hdmi4_cec_init()
drm: omapdrm: Fix DPI on platforms using the DSI VDDS
omapdrm: hdmi4: Correct the SoC revision matching
drm/omap: displays: panel-dpi: add backlight dependency
drm/omap: Fix error handling path in 'omap_dmm_probe()'
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for -rc2
- big pile of bridge driver (mostly tc358767), all handled by Archit
and Andrez
- rockchip dsi fix
- atomic helper regression fix for spurious -EBUSY (Maarten)
- fix deferred fbdev fallout (Maarten)
* tag 'drm-misc-fixes-2017-11-30' of git://anongit.freedesktop.org/drm/drm-misc:
drm/bridge: tc358767: fix 1-lane behavior
drm/bridge: tc358767: fix AUXDATAn registers access
drm/bridge: tc358767: fix timing calculations
drm/bridge: tc358767: fix DP0_MISC register set
drm/bridge: tc358767: filter out too high modes
drm/bridge: tc358767: do no fail on hi-res displays
drm/bridge: Fix lvds-encoder since the panel_bridge rework.
drm/bridge: synopsys/dw-hdmi: Enable cec clock
drm/bridge: adv7511/33: Fix adv7511_cec_init() failure handling
drm/fb_helper: Disable all crtc's when initial setup fails.
drm/atomic: make drm_atomic_helper_wait_for_vblanks more agressive
drm/rockchip: dw-mipi-dsi: fix possible un-balanced runtime PM enable
|
|
With a nxp,se97 chip on an atmel sama5d31 board, the I2C adapter driver
is not always capable of avoiding the 25-35 ms timeout as specified by
the SMBUS protocol. This may cause silent corruption of the last bit of
any transfer, e.g. a one is read instead of a zero if the sensor chip
times out. This also affects the eeprom half of the nxp-se97 chip, where
this silent corruption was originally noticed. Other I2C adapters probably
suffer similar issues, e.g. bit-banging comes to mind as risky...
The SMBUS register in the nxp chip is not a standard Jedec register, but
it is not special to the nxp chips either, at least the atmel chips
have the same mechanism. Therefore, do not special case this on the
manufacturer, it is opt-in via the device property anyway.
Cc: stable@vger.kernel.org # 4.9+
Signed-off-by: Peter Rosin <peda@axentia.se>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
We used to have some cmpxchg syscalls. They're no longer there, so we
no longer need the include.
CC: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
Despite RISC-V having a direct 'fence.i' instruction available to
userspace (which we can't trap!), that's not actually viable when
running on Linux because the kernel might schedule a process on another
hart. There is no way for userspace to handle this without invoking the
kernel (as it doesn't know the thread->hart mappings), so we've defined
a RISC-V specific system call to flush the instruction cache.
This patch adds both a system call and a VDSO entry. If possible, we'd
like to avoid having the system call be considered part of the
user-facing ABI and instead restrict that to the VDSO entry -- both just
in general to avoid having additional user-visible ABI to maintain, and
because we'd prefer that users just call the VDSO entry because there
might be a better way to do this in the future (ie, one that doesn't
require entering the kernel).
Signed-off-by: Andrew Waterman <andrew@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
The RISC-V ISA allows for instruction caches that are not coherent WRT
stores, even on a single hart. As a result, we need to explicitly flush
the instruction cache whenever marking a dirty page as executable in
order to preserve the correct system behavior.
Local instruction caches aren't that scary (our implementations actually
flush the cache, but RISC-V is defined to allow higher-performance
implementations to exist), but RISC-V defines no way to perform an
instruction cache shootdown. When explicitly asked to do so we can
shoot down remote instruction caches via an IPI, but this is a bit on
the slow side.
Instead of requiring an IPI to all harts whenever marking a page as
executable, we simply flush the currently running harts. In order to
maintain correct behavior, we additionally mark every other hart as
needing a deferred instruction cache which will be taken before anything
runs on it.
Signed-off-by: Andrew Waterman <andrew@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
Fixes:
include/asm-generic/mm_hooks.h:20:11: warning: 'struct vm_area_struct' declared inside parameter list will not be visible outside of this definition or declaration
include/asm-generic/mm_hooks.h:19:38: warning: 'struct mm_struct' declared inside parameter list will not be visible outside of this definition or declaration
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
Fixes the following on allmodconfig build:
profile.c:(.text+0x3e4): undefined reference to `setup_profiling_timer'
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
These are the ones needed by current allmodconfig, so add them instead
of everything other architectures are exporting -- the rest can be
added on demand later if needed.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
Needed by some modules (exported by other architectures).
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
include <linux/types.h> for __iomem definition. Also, add volatile to
iounmap() like other architectures have it to avoid "discarding
volatile" warnings from some drivers.
Finally, explicitly promote the base address for INB/OUTB functions to
avoid some old legacy drivers complaining about int-to-ptr promotions.
The drivers are unlikely to work but they're included in allmodconfig
so the warnings are noisy.
Fixes, among other warnings, these with allmodconfig:
../arch/riscv/include/asm/io.h:24:21: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token
extern void __iomem *ioremap(phys_addr_t offset, unsigned long size);
sound/pci/echoaudio/echoaudio.c: In function 'snd_echo_free':
sound/pci/echoaudio/echoaudio.c:1879:10: warning: passing argument 1 of 'iounmap' discards 'volatile' qualifier from pointer target type [-Wdiscarded-qualifiers]
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
INT and SHORT are used by some drivers that pull in the include files,
so prefixing helps avoid namespace conflicts. Other constructs in the
same file already uses this.
Fixes, among others, these warnings with allmodconfig:
../sound/core/pcm_misc.c:43:0: warning: "INT" redefined
#define INT __force int
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
Fixes this from allmodconfig:
drivers/tty/serial/earlycon.c:27:10: fatal error: asm/serial.h: No such file or directory
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Once the inode item writeback errors is already fixed, it's time to fix the same
problem in dquot code.
Although there were no reports of users hitting this bug in dquot code (at least
none I've seen), the bug is there and I was already planning to fix it when the
correct approach to fix the inodes part was decided.
This patch aims to fix the same problem in dquot code, regarding failed buffers
being unable to be resubmitted once they are flush locked.
Tested with the recently test-case sent to fstests list by Hou Tao.
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Since we've used up all the bits in i_mode, the existing mode check
doesn't actually do anything useful. However, we've not used all the
bit values in the format portion of i_mode, so we /do/ need to test
that for bad values.
Fixes: 80e4e1268 ("xfs: scrub inodes")
Fixes-coverity-id: 1423992
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
The first thing that xfs_writepage_map does is clobber the offset
parameter. Since we never use the passed-in value, turn the parameter
into a local variable. This gets rid of an UBSAN warning in generic/466.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
Fix some complaints from the UBSAN about signed integer addition overflows.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
Pull KVM fixes from Paolo Bonzini:
- x86 bugfixes: APIC, nested virtualization, IOAPIC
- PPC bugfix: HPT guests on a POWER9 radix host
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (26 commits)
KVM: Let KVM_SET_SIGNAL_MASK work as advertised
KVM: VMX: Fix vmx->nested freeing when no SMI handler
KVM: VMX: Fix rflags cache during vCPU reset
KVM: X86: Fix softlockup when get the current kvmclock
KVM: lapic: Fixup LDR on load in x2apic
KVM: lapic: Split out x2apic ldr calculation
KVM: PPC: Book3S HV: Fix migration and HPT resizing of HPT guests on radix hosts
KVM: vmx: use X86_CR4_UMIP and X86_FEATURE_UMIP
KVM: x86: Fix CPUID function for word 6 (80000001_ECX)
KVM: nVMX: Fix vmx_check_nested_events() return value in case an event was reinjected to L2
KVM: x86: ioapic: Preserve read-only values in the redirection table
KVM: x86: ioapic: Clear Remote IRR when entry is switched to edge-triggered
KVM: x86: ioapic: Remove redundant check for Remote IRR in ioapic_set_irq
KVM: x86: ioapic: Don't fire level irq when Remote IRR set
KVM: x86: ioapic: Fix level-triggered EOI and IOAPIC reconfigure race
KVM: x86: inject exceptions produced by x86_decode_insn
KVM: x86: Allow suppressing prints on RDMSR/WRMSR of unhandled MSRs
KVM: x86: fix em_fxstor() sleeping while in atomic
KVM: nVMX: Fix mmu context after VMLAUNCH/VMRESUME failure
KVM: nVMX: Validate the IA32_BNDCFGS on nested VM-entry
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
- SPDX identifiers are added to more of the s390 specific files.
- The ELF_ET_DYN_BASE base patch from Kees is reverted, with the change
some old 31-bit programs crash.
- Bug fixes and cleanups.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (29 commits)
s390/gs: add compat regset for the guarded storage broadcast control block
s390: revert ELF_ET_DYN_BASE base changes
s390: Remove redundant license text
s390: crypto: Remove redundant license text
s390: include: Remove redundant license text
s390: kernel: Remove redundant license text
s390: add SPDX identifiers to the remaining files
s390: appldata: add SPDX identifiers to the remaining files
s390: pci: add SPDX identifiers to the remaining files
s390: mm: add SPDX identifiers to the remaining files
s390: crypto: add SPDX identifiers to the remaining files
s390: kernel: add SPDX identifiers to the remaining files
s390: sthyi: add SPDX identifiers to the remaining files
s390: drivers: Remove redundant license text
s390: crypto: Remove redundant license text
s390: virtio: add SPDX identifiers to the remaining files
s390: scsi: zfcp_aux: add SPDX identifier
s390: net: add SPDX identifiers to the remaining files
s390: char: add SPDX identifiers to the remaining files
s390: cio: add SPDX identifiers to the remaining files
...
|
|
drm_atomic_helper_wait_for_vblanks will go away in the future.
The new drm_atomic_helper_setup_commit in 4.15 expects that blocking commits
have completed flipping before the commit_tail returns. This must be ensured
by calling wait_for_vblanks or wait_for_flip_done, where flip_done might do
a less agressive wait, which is fine for imx-drm.
Fixes: 080de2e5be2d (drm/atomic: Check for busy planes/connectors before
setting the commit)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
* acpi-ec:
ACPI / EC: Fix regression related to PM ops support in ECDT device
|
|
* pm-tools:
cpupower : Fix cpupower working when cpu0 is offline
cpupowerutils: bench - Fix cpu online check
|
|
"ret" needs to be signed for the error handling to work.
Fixes: 8d7f934df8d8 ("omapdrm: hdmi4_cec: add OMAP4 HDMI CEC support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
Commit d178e034d565 ("drm: omapdrm: Move FEAT_DPI_USES_VDDS_DSI feature
to dpi code") replaced usage of platform data version with SoC matching
to configure DPI VDDS. The SoC match entries were incorrect, they should
have matched on the machine name instead of the SoC family. Fix it.
The result was observed on OpenPandora with OMAP3530 where the panel only
had the Blue channel and Red&Green were missing. It was not observed on
GTA04 with DM3730.
Fixes: d178e034d565 ("drm: omapdrm: Move FEAT_DPI_USES_VDDS_DSI feature to dpi code")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Cc: stable@vger.kernel.org # 4.14
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
I believe the intention of the commit 2c9fc9bf45f8
("drm: omapdrm: Move FEAT_HDMI_* features to hdmi4 driver")
was to identify omap4430 ES1.x, omap4430 ES2.x and other OMAP4 revisions,
like omap4460.
By using family=OMAP4 in the match the code will treat omap4460 ES1.x in a
same way as it would treat omap4430 ES1.x
This breaks HDMI audio on OMAP4460 devices (PandaES for example).
Correct the match rule so we are not going to get false positive match.
Fixes: 2c9fc9bf45f8 ("drm: omapdrm: Move FEAT_HDMI_* features to hdmi4 driver")
Cc: stable@vger.kernel.org # 4.14
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
The new backlight code causes a link failure when backlight
support itself is disabled:
drivers/gpu/drm/omapdrm/displays/panel-dpi.o: In function `panel_dpi_probe_of':
panel-dpi.c:(.text+0x35c): undefined reference to `of_find_backlight_by_node'
This adds a Kconfig dependency like we have for the other OMAP
display targets.
Fixes: 39135a305a0f ("drm/omap: displays: panel-dpi: Support for handling backlight devices")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
If we don't find a matching device node, we must free the memory allocated
in 'omap_dmm' a few lines above.
Fixes: 7cb0d6c17b96 ("drm/omap: fix TILER on OMAP5")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
We seem to be missing some W/A for 2M pages and are getting
a hit on raw GPU read bandwidths (even 30%) even though the
GPU write bandwidths improve (even 10%).
For now, disable THP, which is our only practical source of
2M pages until we have a W/A for the issue.
v2:
- Be explicit that we talk about GPU bandwidths (Eero)
- s/deny/never/ because that's why (Chris)
Reported-by: Valtteri Rantala <valtteri.rantala@intel.com>
Fixes: b901bb89324a ("drm/i915/gemfs: enable THP")
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Valtteri Rantala <valtteri.rantala@intel.com>
Cc: Eero Tamminen <eero.t.tamminen@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Tested-by: Valtteri Rantala <valtteri.rantala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171127091233.7001-1-joonas.lahtinen@linux.intel.com
(cherry picked from commit 9987da4b5dcfc8b94b702d4bb94b30955eb73c75)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Use drm_dp_channel_eq_ok helper
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-7-git-send-email-andrey.gusakov@cogentembedded.com
|
|
First four bytes should go to DP0_AUXWDATA0. Due to bug if
len > 4 first four bytes was writen to DP0_AUXWDATA1 and all
data get shifted by 4 bytes. Fix it.
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-6-git-send-email-andrey.gusakov@cogentembedded.com
|
|
Fields in HTIM01 and HTIM02 regs should be even.
Recomended thresh_dly value is max_tu_symbol.
Remove set of VPCTRL0.VSDELAY as it is related to DSI input
interface. Currently driver supports only DPI.
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-5-git-send-email-andrey.gusakov@cogentembedded.com
|
|
Remove shift from TU_SIZE_RECOMMENDED define as it used to
calculate max_tu_symbols.
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-4-git-send-email-andrey.gusakov@cogentembedded.com
|
|
Pixel clock limitation for DPI is 154 MHz. Do not accept modes
with higher pixel clock rate.
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-3-git-send-email-andrey.gusakov@cogentembedded.com
|
|
Do not fail data rates higher than 2.7 and more than 2 lanes.
Try to fall back to 2.7Gbps and 2 lanes.
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-2-git-send-email-andrey.gusakov@cogentembedded.com
|
|
The panel_bridge bridge attaches to the panel's OF node, not the
lvds-encoder's node. Put in a little no-op bridge of our own so that
our consumers can still find a bridge where they expect.
This also fixes an unintended unregistration and leak of the
panel-bridge on module remove.
Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: 13dfc0540a57 ("drm/bridge: Refactor out the panel wrapper from the lvds-encoder bri
dge.")
Tested-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114191647.22207-1-eric@anholt.net
|
|
Support the "cec" optional clock. The documentation already mentions "cec"
optional clock and it is used by several boards, but currently the driver
doesn't enable it, thus preventing cec from working on those boards.
And even worse: a /dev/cecX device will appear for those boards, but it
won't be functioning without configuring this clock.
Changes:
v4:
- Change commit message to stress the importance of this patch
v3:
- Drop useless braces
v2:
- Separate ENOENT errors from others
- Propagate other errors (especially -EPROBE_DEFER)
Signed-off-by: Pierre-Hugues Husson <phh@phh.me>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171125201844.11353-1-phh@phh.me
|
|
If the device tree for a board did not specify a cec clock, then
adv7511_cec_init would return an error, which would cause adv7511_probe()
to fail and thus there is no HDMI output.
There is no need to have adv7511_probe() fail if the CEC initialization
fails, so just change adv7511_cec_init() to a void function. In addition,
adv7511_cec_init() should just return silently if the cec clock isn't
found and show a message for any other errors.
An otherwise correct cleanup patch from Dan Carpenter turned this broken
failure handling into a kernel Oops, so bisection points to commit
7af35b0addbc ("drm/kirin: Checking for IS_ERR() instead of NULL") rather
than 3b1b975003e4 ("drm: adv7511/33: add HDMI CEC support").
Based on earlier patches from Arnd and John.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Xinliang Liu <xinliang.liu@linaro.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: https://bugs.linaro.org/show_bug.cgi?id=3345
Link: https://lkft.validation.linaro.org/scheduler/job/48017#L3551
Fixes: 7af35b0addbc ("drm/kirin: Checking for IS_ERR() instead of NULL")
Fixes: 3b1b975003e4 ("drm: adv7511/33: add HDMI CEC support")
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Tested-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/9097b2a4-b6b9-5fca-e039-0a17694b1143@xs4all.nl
|
|
Mergr misc fixes from Andrew Morton:
"28 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (28 commits)
fs/hugetlbfs/inode.c: change put_page/unlock_page order in hugetlbfs_fallocate()
mm/hugetlb: fix NULL-pointer dereference on 5-level paging machine
autofs: revert "autofs: fix AT_NO_AUTOMOUNT not being honored"
autofs: revert "autofs: take more care to not update last_used on path walk"
fs/fat/inode.c: fix sb_rdonly() change
mm, memcg: fix mem_cgroup_swapout() for THPs
mm: migrate: fix an incorrect call of prep_transhuge_page()
kmemleak: add scheduling point to kmemleak_scan()
scripts/bloat-o-meter: don't fail with division by 0
fs/mbcache.c: make count_objects() more robust
Revert "mm/page-writeback.c: print a warning if the vm dirtiness settings are illogical"
mm/madvise.c: fix madvise() infinite loop under special circumstances
exec: avoid RLIMIT_STACK races with prlimit()
IB/core: disable memory registration of filesystem-dax vmas
v4l2: disable filesystem-dax mapping support
mm: fail get_vaddr_frames() for filesystem-dax mappings
mm: introduce get_user_pages_longterm
device-dax: implement ->split() to catch invalid munmap attempts
mm, hugetlbfs: introduce ->split() to vm_operations_struct
scripts/faddr2line: extend usage on generic arch
...
|
|
hugetlfs_fallocate() currently performs put_page() before unlock_page().
This scenario opens a small time window, from the time the page is added
to the page cache, until it is unlocked, in which the page might be
removed from the page-cache by another core. If the page is removed
during this time windows, it might cause a memory corruption, as the
wrong page will be unlocked.
It is arguable whether this scenario can happen in a real system, and
there are several mitigating factors. The issue was found by code
inspection (actually grep), and not by actually triggering the flow.
Yet, since putting the page before unlocking is incorrect it should be
fixed, if only to prevent future breakage or someone copy-pasting this
code.
Mike said:
"I am of the opinion that this does not need to be sent to stable.
Although the ordering is current code is incorrect, there is no way
for this to be a problem with current locking. In addition, I verified
that the perhaps bigger issue with sys_fadvise64(POSIX_FADV_DONTNEED)
for hugetlbfs and other filesystems is addressed in 3a77d214807c ("mm:
fadvise: avoid fadvise for fs without backing device")"
Link: http://lkml.kernel.org/r/20170826191124.51642-1-namit@vmware.com
Fixes: 70c3547e36f5c ("hugetlbfs: add hugetlbfs_fallocate()")
Signed-off-by: Nadav Amit <namit@vmware.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
I made a mistake during converting hugetlb code to 5-level paging: in
huge_pte_alloc() we have to use p4d_alloc(), not p4d_offset().
Otherwise it leads to crash -- NULL-pointer dereference in pud_alloc()
if p4d table is not yet allocated.
It only can happen in 5-level paging mode. In 4-level paging mode
p4d_offset() always returns pgd, so we are fine.
Link: http://lkml.kernel.org/r/20171122121921.64822-1-kirill.shutemov@linux.intel.com
Fixes: c2febafc6773 ("mm: convert generic code to 5-level paging")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org> [4.11+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 42f461482178 ("autofs: fix AT_NO_AUTOMOUNT not being honored")
allowed the fstatat(2) system call to properly honor the AT_NO_AUTOMOUNT
flag but introduced a semantic change.
In order to honor AT_NO_AUTOMOUNT a semantic change was made to the
negative dentry case for stat family system calls in follow_automount().
This changed the unconditional triggering of an automount in this case
to no longer be done and an error returned instead.
This has caused more problems than I expected so reverting the change is
needed.
In a discussion with Neil Brown it was concluded that the automount(8)
daemon can implement this change without kernel modifications. So that
will be done instead and the autofs module documentation updated with a
description of the problem and what needs to be done by module users for
this specific case.
Link: http://lkml.kernel.org/r/151174730120.6162.3848002191530283984.stgit@pluto.themaw.net
Fixes: 42f4614821 ("autofs: fix AT_NO_AUTOMOUNT not being honored")
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Neil Brown <neilb@suse.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: Colin Walters <walters@redhat.com>
Cc: Ondrej Holy <oholy@redhat.com>
Cc: <stable@vger.kernel.org> [4.11+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
While commit 092a53452bb7 ("autofs: take more care to not update
last_used on path walk") helped (partially) resolve a problem where
automounts were not expiring due to aggressive accesses from user space
it has a side effect for very large environments.
This change helps with the expire problem by making the expire more
aggressive but, for very large environments, that means more mount
requests from clients. When there are a lot of clients that can mean
fairly significant server load increases.
It turns out I put the last_used in this position to solve this very
problem and failed to update my own thinking of the autofs expire
policy. So the patch being reverted introduces a regression which
should be fixed.
Link: http://lkml.kernel.org/r/151174729420.6162.1832622523537052460.stgit@pluto.themaw.net
Fixes: 092a53452b ("autofs: take more care to not update last_used on path walk")
Signed-off-by: Ian Kent <raven@themaw.net>
Reviewed-by: NeilBrown <neilb@suse.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: <stable@vger.kernel.org> [4.11+]
Cc: Colin Walters <walters@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Ondrej Holy <oholy@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit bc98a42c1f7d ("VFS: Convert sb->s_flags & MS_RDONLY to
sb_rdonly(sb)") converted fat_remount():new_rdonly from a bool to an
int.
However fat_remount() depends upon the compiler's conversion of a
non-zero integer into boolean `true'.
Fix it by switching `new_rdonly' back into a bool.
Link: http://lkml.kernel.org/r/87mv3d5x51.fsf@mail.parknet.co.jp
Fixes: bc98a42c1f7d0f8 ("VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb)")
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Joe Perches <joe@perches.com>
Cc: David Howells <dhowells@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit d6810d730022 ("memcg, THP, swap: make mem_cgroup_swapout()
support THP") changed mem_cgroup_swapout() to support transparent huge
page (THP).
However the patch missed one location which should be changed for
correctly handling THPs. The resulting bug will cause the memory
cgroups whose THPs were swapped out to become zombies on deletion.
Link: http://lkml.kernel.org/r/20171128161941.20931-1-shakeelb@google.com
Fixes: d6810d730022 ("memcg, THP, swap: make mem_cgroup_swapout() support THP")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In https://lkml.org/lkml/2017/11/20/411, Andrea reported that during
memory hotplug/hot remove prep_transhuge_page() is called incorrectly on
non-THP pages for migration, when THP is on but THP migration is not
enabled. This leads to a bad state of target pages for migration.
By inspecting the code, if called on a non-THP, prep_transhuge_page()
will
1) change the value of the mapping of (page + 2), since it is used for
THP deferred list;
2) change the lru value of (page + 1), since it is used for THP's dtor.
Both can lead to data corruption of these two pages.
Andrea said:
"Pragmatically and from the point of view of the memory_hotplug subsys,
the effect is a kernel crash when pages are being migrated during a
memory hot remove offline and migration target pages are found in a
bad state"
This patch fixes it by only calling prep_transhuge_page() when we are
certain that the target page is THP.
Link: http://lkml.kernel.org/r/20171121021855.50525-1-zi.yan@sent.com
Fixes: 8135d8926c08 ("mm: memory_hotplug: memory hotremove supports thp migration")
Signed-off-by: Zi Yan <zi.yan@cs.rutgers.edu>
Reported-by: Andrea Reale <ar@linux.vnet.ibm.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: <stable@vger.kernel.org> [4.14]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
kmemleak_scan() will scan struct page for each node and it can be really
large and resulting in a soft lockup. We have seen a soft lockup when
do scan while compile kernel:
watchdog: BUG: soft lockup - CPU#53 stuck for 22s! [bash:10287]
[...]
Call Trace:
kmemleak_scan+0x21a/0x4c0
kmemleak_write+0x312/0x350
full_proxy_write+0x5a/0xa0
__vfs_write+0x33/0x150
vfs_write+0xad/0x1a0
SyS_write+0x52/0xc0
do_syscall_64+0x61/0x1a0
entry_SYSCALL64_slow_path+0x25/0x25
Fix this by adding cond_resched every MAX_SCAN_SIZE.
Link: http://lkml.kernel.org/r/1511439788-20099-1-git-send-email-xieyisheng1@huawei.com
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Under some circumstances it's possible to get a divider 0 which crashes
the script.
Traceback (most recent call last):
File "linux/scripts/bloat-o-meter", line 98, in <module>
print_result("Function", "tTdDbBrR", 2)
File "linux/scripts/bloat-o-meter", line 87, in print_result
(otot, ntot, (ntot - otot)*100.0/otot))
ZeroDivisionError: float division by zero
Hide this by checking the divider first.
Link: http://lkml.kernel.org/r/20171123171219.31453-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Vaneet Narang <v.narang@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When running ltp stress test for 7*24 hours, vmscan occasionally emits
the following warning continuously:
mb_cache_scan+0x0/0x3f0 negative objects to delete
nr=-9232265467809300450
...
Tracing shows the freeable(mb_cache_count returns) is -1, which causes
the continuous accumulation and overflow of total_scan.
This patch makes sure that mb_cache_count() cannot return a negative
value, which makes the mbcache shrinker more robust.
Link: http://lkml.kernel.org/r/1511753419-52328-1-git-send-email-jiang.biao2@zte.com.cn
Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <zhong.weidong@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
