summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-03-10staging: qlge: qlge.h: remove spaces before tabs and align codePayal Kshirsagar
Remove white spaces before tabs and align code properly for readability. Signed-off-by: Payal Kshirsagar <payalskshirsagar1234@gmail.com> Link: https://lore.kernel.org/r/20200309162728.4342-2-payalskshirsagar1234@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-10staging: qlge: remove blank linePayal Kshirsagar
Remove unnecessary multiple blank lines. Signed-off-by: Payal Kshirsagar <payalskshirsagar1234@gmail.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Link: https://lore.kernel.org/r/20200309094036.3957-1-payalskshirsagar1234@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-10staging: vt6655: alignment should match open parenthesisPayal Kshirsagar
Align code to the open parenthesis to fix the alignment issue. Signed-off-by: Payal Kshirsagar <payalskshirsagar1234@gmail.com> Link: https://lore.kernel.org/r/20200309170927.6171-1-payalskshirsagar1234@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-10staging: vt6656: remove blank linePayal Kshirsagar
To avoid style issues, remove multiple blank lines. Signed-off-by: Payal Kshirsagar <payalskshirsagar1234@gmail.com> Acked-by: Julia Lawall <julia.lawall@inria.fr> Link: https://lore.kernel.org/r/20200309073424.4920-1-payalskshirsagar1234@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-08iio: dac: Kconfig: sort symbols alphabeticallyAlexandru Ardelean
While adding a new device, I noticed these aren't sorted alphabetically [as in the Makefile], which messed my head-up. This change sorts the devices alphabetically in the drivers/iio/dac/Kconfig file as well. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: light: gp2ap020a00f: fix iio_triggered_buffer_{predisable,postenable} ↵Alexandru Ardelean
positions The iio_triggered_buffer_{predisable,postenable} functions attach/detach the poll functions. For the predisable hook, the disable code should occur before detaching the poll func, and for the postenable hook, the poll func should be attached before the enable code. This change moves the postenable/predisable hooks into the correct positions. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: potentiostat: lmp9100: fix iio_triggered_buffer_{predisable,postenable} ↵Alexandru Ardelean
positions The iio_triggered_buffer_{predisable,postenable} functions attach/detach the poll functions. For the predisable hook, the disable code should occur before detaching the poll func, and for the postenable hook, the poll func should be attached before the enable code. The lmp9100 was attaching a poll function but never detaching it via any IIO disable hook. This change adds the detaching of the poll function, and moves/renames lmp91000_buffer_preenable() function to lmp91000_buffer_postenable(). The idea is to make it more symmetrical, so that when the iio_triggered_buffer_{predisable,postenable} functions get removed, it's easier to see. Fixes: 67e17300dc1d7 ("iio: potentiostat: add LMP91000 support") Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: trigger: stm32-timer: add power management supportFabrice Gasnier
Add suspend/resume PM sleep ops to stm32-timer-trigger driver. Register contents may be lost depending on low power modes. When going to low power, enforce the timer isn't active. Gracefully restore its state upon resume in case it's been left enabled prior to suspend. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: trigger: stm32-timer: rename enabled flagFabrice Gasnier
"clk_enabled" flag reflects enabled state of the timer, for master mode, slave mode or trigger (with sampling_frequency). So rename it to "enabled". Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: add a TODORohit Sarkar
This patch adds a TODO file with some work items added with reference to the conversation in [1]. A TODO file is immensely useful while onboarding new contributors who are looking for some low hanging fruit to get their foot into the door. Since these items affect all drivers the file has been placed in the root iio directory instead of augmenting the staging TODO. Thanks, Rohit [1]: https://marc.info/?l=linux-iio&m=158256721009892&w=2 Signed-off-by: Rohit Sarkar <rohitsarkar5398@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08counter: 104-quad-8: Support Differential Encoder Cable StatusWilliam Breathitt Gray
The ACCES 104-QUAD-8 series provides status information about the connection state of the differential encoder cable inputs. This patch implements support to expose such information from these devices. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08counter: 104-quad-8: Support Filter Clock PrescalerWilliam Breathitt Gray
The ACCES 104-QUAD-8 series does active filtering on the quadrature input signals via the PC/104 bus clock (OSC 14.318 MHz). This patch exposes the filter clock prescaler available on each channel. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: pressure: icp10100: add driver for InvenSense ICP-101xxJean-Baptiste Maneyrol
InvenSense ICP-101xx sensors are a family of barometric pressure and temperature sensor. These devices are I2C only and use a specific protocol of commands/responses. Data transfer is secured by using crc8. Driver provides processed pressure and raw temperature data. Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: industrialio-core: Fix debugfs readAlexandru Tachici
Currently iio_debugfs_read_reg calls debugfs_reg_access every time it is ran. Reading the same hardware register multiple times during the same reading of a debugfs file can cause unintended effects. For example for each: cat iio:device0/direct_reg_access the file_operations.read function will be called at least twice. First will return the full length of the string in bytes and the second will return 0. This patch makes iio_debugfs_read_reg to call debugfs_reg_access only when the user's buffer position (*ppos) is 0. (meaning it is the beginning of a new reading of the debugfs file). Fixes: e553f182d55b ("staging: iio: core: Introduce debugfs support, add support for direct register access") Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: imu: adis: add a note better explaining state_lockAlexandru Ardelean
The 'state_lock' mutex was renamed from 'txrx_lock' in a previous patch and is intended to be used by ADIS drivers to protect the state of devices during consecutive R/W ops. The initial patch that introduced this change did not do a good [well, any] job at explaining this. This patch adds a comment to the 'state_lock' better explaining it's use. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: imu: adis: update 'adis_data' struct doc-stringAlexandru Ardelean
The doc-string has been neglected over time. This change updates it with all the missing info. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: imu: adis: add doc-string for 'adis' structAlexandru Ardelean
This change adds a doc-string for the 'adis' struct. It details the fields and their roles. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: imu: adis_buffer: Use new structure for SPI transfer delaysSergiu Cuciurean
In a recent change to the SPI subsystem [1], a new `delay` struct was added to replace the `delay_usecs`. This change replaces the current `delay_usecs` with `delay` for this driver. The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure that both `delay_usecs` & `delay` are used (in this order to preserve backwards compatibility). [1] commit bebcfd272df6 ("spi: introduce `delay` field for `spi_transfer` + spi_transfer_delay_exec()") Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: adc: ti-tlc4541: Use new structure for SPI transfer delaysSergiu Cuciurean
In a recent change to the SPI subsystem [1], a new `delay` struct was added to replace the `delay_usecs`. This change replaces the current `delay_usecs` with `delay` for this driver. The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure that both `delay_usecs` & `delay` are used (in this order to preserve backwards compatibility). [1] commit bebcfd272df6 ("spi: introduce `delay` field for `spi_transfer` + spi_transfer_delay_exec()") Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: adc: mcp320x: Use new structure for SPI transfer delaysSergiu Cuciurean
In a recent change to the SPI subsystem [1], a new `delay` struct was added to replace the `delay_usecs`. This change replaces the current `delay_usecs` with `delay` for this driver. The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure that both `delay_usecs` & `delay` are used (in this order to preserve backwards compatibility). [1] commit bebcfd272df6 ("spi: introduce `delay` field for `spi_transfer` + spi_transfer_delay_exec()") Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: adc: max1118: Use new structure for SPI transfer delaysSergiu Cuciurean
In a recent change to the SPI subsystem [1], a new `delay` struct was added to replace the `delay_usecs`. This change replaces the current `delay_usecs` with `delay` for this driver. The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure that both `delay_usecs` & `delay` are used (in this order to preserve backwards compatibility). [1] commit bebcfd272df6 ("spi: introduce `delay` field for `spi_transfer` + spi_transfer_delay_exec()") Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: adc: ad9292: Use new structure for SPI transfer delaysSergiu Cuciurean
In a recent change to the SPI subsystem [1], a new `delay` struct was added to replace the `delay_usecs`. This change replaces the current `delay_usecs` with `delay` for this driver. The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure that both `delay_usecs` & `delay` are used (in this order to preserve backwards compatibility). [1] commit bebcfd272df6 ("spi: introduce `delay` field for `spi_transfer` + spi_transfer_delay_exec()") Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: adc: exynos: Silence warning about regulators during deferred probeMarek Szyprowski
Don't confuse user with meaningless warning about the failure in getting regulators in case of deferred probe. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08staging: iio: update TODORohit Sarkar
Since there are no uses of the old GPIO API, remove the item from the TODO. Signed-off-by: Rohit Sarkar <rohitsarkar5398@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: amplifiers: ad8366: add support for HMC1119 AttenuatorSergiu Cuciurean
This change adds support for the HMC1119 Silicon Digial Attenuator. The HMC1119 is a broadband, highly accurate, 7-bit digital attenuator, operating from 0.1 GHz to 6.0 GHz with 31.5 dB attenuation control range in 0.25 dB steps. Link: https://www.analog.com/media/en/technical-documentation/data-sheets/hmc1119.pdf Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: si1133: read 24-bit signed integer for measurementMaxime Roussin-Bélanger
The chip is configured in 24 bit mode. The values read from it must always be treated as is. This fixes the issue by replacing the previous 16 bits value by a 24 bits buffer. This changes affects the value output by previous version of the driver, since the least significant byte was missing. The upper half of 16 bit values previously output are now the upper half of a 24 bit value. Fixes: e01e7eaf37d8 ("iio: light: introduce si1133") Reported-by: Simon Goyette <simon.goyette@gmail.com> Co-authored-by: Guillaume Champagne <champagne.guillaume.c@gmail.com> Signed-off-by: Maxime Roussin-Bélanger <maxime.roussinbelanger@gmail.com> Signed-off-by: Guillaume Champagne <champagne.guillaume.c@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08dt-bindings: iio: dac: Add docs for AD5770R DACAlexandru Tachici
Adding dt-bindings documentation for AD5770R DAC. Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com> Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: dac: ad5770r: Add AD5770R supportAlexandru Tachici
The AD5770R is a 6-channel, 14-bit resolution, low noise, programmable current output digital-to-analog converter (DAC) for photonics control applications. It contains five 14-bit resolution current sourcing DAC channels and one 14-bit resolution current sourcing/sinking DAC channel. Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com> Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: light: Simplify the current to lux LUTGregor Riepl
The look-up-table for currens to lux is simply specifying all currents from 5..47 mA, if we add some values for 0..5 we can just select the index for the lux value in an array from the mA value. Use clamp() to get the value in the range of values in the array. Cc: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Gregor Riepl <onitake@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08dt-bindings: iio: adc: ad7923: Add binding documentation for AD7928Daniel Junho
This patch add device tree binding documentation for AD7923 adc in YAML format. Signed-off-by: Daniel Junho <djunho@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08dt-bindings: iio: chemical: consolidate atlas-sensor docsMatt Ranostay
Since Atlas Scientific device support only varies from the compatible string is ideal all the respective docs are merged into a single doc named atlas,sensor.yaml Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: chemical: atlas-sensor: add DO-SM module supportMatt Ranostay
Atlas Scientific DO-SM OEM sensor reads disolved oxygen in a solution. This is reported back as mg/L which maps directly to ppm and so the IIO_CONCENTRATION channel type can be used. Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: chemical: atlas-sensor: allow probe without interrupt lineMatt Ranostay
Sensors don't actually need a interrupt line to give valid readings, and can triggered with CONFIG_IIO_HRTIMER_TRIGGER as well. Remove the required check for interrupt, and continue along in the probe function. Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: imu: inv_mpu6050: temperature only work with accel/gyroJean-Baptiste Maneyrol
Temperature sensor works correctly only when accel and/or gyro is turned on. Prevent polling value if they are not running. Anyway it doesn't make sense to use it without sensor engines on. Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: imu: inv_mpu6050: use runtime pm with autosuspendJean-Baptiste Maneyrol
Use runtime power management for handling chip power and sensor engines on/off. Simplifies things a lot since pm runtime already has reference counter. Usage of autosuspend reduces the number of power on/off. This makes polling interface now usable to get data at low frequency. Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: imu: inv_mpu6050: dynamic sampling rate changeJean-Baptiste Maneyrol
Sampling rate can be changed while the chip is running. It can be useful thus do not prevent it. Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: imu: inv_mpu6050: factorize fifo enable/disableJean-Baptiste Maneyrol
Rework fifo enable/disable in a separate function. Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: imu: inv_mpu6050: fix data polling interfaceJean-Baptiste Maneyrol
When reading data with the polling interface, we need to wait at 1 sampling period to have a sample. For gyroscope and magnetometer, we need to wait for 2 periods before having a correct sample. Not suitable for stable or backporting. Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: imu: inv_mpu6050: rewrite power and engine managementJean-Baptiste Maneyrol
Rewrite clock management to use automatic clock switching present since MPU6500. Sensors engine management can now turn on or off a batch of sensors which simplifies usage a lot. Temperature sensor is now turned on/off depending on usage. Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: imu: inv_mpu6050: reduce sleep time when turning regulators onJean-Baptiste Maneyrol
Turning vdd regulator on requires a consequent sleep for the chip to power on correctly. Turning vddio regulator is much faster. Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: imu: inv_mpu6050: add all signal path resets at initJean-Baptiste Maneyrol
Old chips using spi require for a full reset to manually reset all signal path. This does not harm when using i2c so do it inconditionally. Exclude i2c only chips. Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: imu: inv_mpu6050: early init of chip_config for use at setupJean-Baptiste Maneyrol
Init chip_config early and use its values for initial setup. More coherent, prevent possible mistakes. Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: imu: inv_mpu6050: simplify polling magnetometerJean-Baptiste Maneyrol
Do not change the sampling rate value. Let userspace decide what is the sampling rate to use. Read only the requested axis. Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: imu: inv_mpu6050: set power on/off only once during all initJean-Baptiste Maneyrol
This way there is no need anymore to export the power function to i2c and spi modules. Bus setup is done inside init when power is on and the result is now checked. Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: imu: inv_mpu6050: delete useless checkJean-Baptiste Maneyrol
If we are here it means we have fifo enabled for 1 sensor at least. And interrupt is always required for using trigger. Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: imu: inv_mpu6050: enable i2c aux mux bypass only onceJean-Baptiste Maneyrol
i2c auxiliary mux is done by analog switches. You do not need to set them for every i2c transfer. Just set i2c bypass bit at init and do noting in i2c de/select. Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08dt-bindings: iio: adc: max1363 etc i2c ADC binding conversionJonathan Cameron
Split the binding in two to reflect the threshold monitor capabilities and hence interrupts vs the more straight forward parts that don't have this facility. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Rob Herring <robh@kernel.org>
2020-03-08iio: trigger: stm32-timer: enable clock when in master modeFabrice Gasnier
Clock should be enabled as soon as using master modes, even before enabling timer. Or, this may provoke bad behavior on the other end (slave timer). Then, introduce 'clk_enabled' flag, instead of relying on CR1 EN bit, to keep track of clock being enabled (balanced refcount). Propagate this anywhere else in the driver. Also add 'remove' routine to stop timer and disable clock in case it has been left enabled. Enforce the user interface has been unregistered in the remove routine, before disabling the hardware to avoid possible race. So, remove use of devm_ variant to register triggers and unregister them before the hardware gets disabled [1]. [1] https://patchwork.kernel.org/patch/9956247/ Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: light: al3320a allow module autoload and polishDavid Heidelberg
- allow autoloading when build as module and defined inside DT Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: light: al3320a implement devm_add_action_or_resetDavid Heidelberg
Use devm_add_action_or_reset to automatically disable the device and allow you to get rid of the remove function entirely. Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
generated by cgit (git 2.34.1) at 2025-07-15 23:34:36 +0000