| Age | Commit message (Collapse) | Author |
|---|
|
Introduce the dt-bindings documentation for bcm2835 CCP2/CSI2 Unicam
camera interface.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Co-developed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Co-developed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
This is a packed grey-scale image format with a depth of 14 bits per
pixel. Every four consecutive samples are packed into seven bytes. Each
of the first four bytes contain the eight high order bits of the pixels,
and the three following bytes contains the six least significants bits
of each pixel, in the same order.
As the other formats only needed 5 bytes before, append two bytes in the
documentation array.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
This is a packed grey-scale image format with a depth of 12 bits per
pixel. Two consecutive pixels are packed into 3 bytes. The first 2 bytes
contain the 8 high order bits of the pixels, and the 3rd byte contains
the 4 least significants bits of each pixel, in the same order.
Add the entry in userspace API, and document it.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add trivial S_ROUTING IOCTL support for drivers where routing is static.
Essentially this means returning the same information G_ROUTING call would
have done.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Julien Massot <julien.massot@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Return the routes set using S_ROUTING back to the user. Also reflect this
in documentation.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The len_routes field is used to tell the size of the routes array in
struct v4l2_subdev_routing. This way the number of routes returned from
S_ROUTING IOCTL may be larger than the number of routes provided, in case
there are more routes returned by the driver.
Note that this uAPI is still disabled in the code, so this change can
safely be done. Anyone who manually patched the code to enable this uAPI
must update their code.
The patch also increases the number of reserved fields in struct
v4l2_subdev_routing.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
As the user needs to know what went wrong for S_ROUTING, copy array
arguments back to the user.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add two new functions, v4l2_subdev_lock_states() and
v4l2_subdev_unclock_states(), to acquire and release the state of two
sub-devices. They differ from calling v4l2_subdev_{un,}lock_state() so
that if the two states share the same lock, the lock is acquired only
once.
Also use the new functions in v4l2_subdev_link_validate().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Document S_ROUTING behaviour for different devices.
Generally in devices that produce streams the streams are static and some
can be enabled and disabled, whereas in devices that just transport them
or write them to memory, more configurability is allowed. Document this.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Having extra streams on the source end of the link that cannot be captured
by the sink sub-device generally are not an issue, at least not on CSI-2
bus. Still document that there may be hardware-specific limitations. For
example on parallel bus this might not work on all cases.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Set (and unset) the V4L2_FMT_FLAG_META_LINE_BASED flag in struct
v4l2_fmtdesc based on the format after returning the driver callback for
enumerating formats. This way the drivers don't need to care about the
flag.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Many camera sensors, among other devices, transmit embedded data and image
data for each CSI-2 frame. This embedded data typically contains register
configuration of the sensor that has been used to capture the image data
of the same frame.
The embedded data is received by the CSI-2 receiver and has the same
properties as the image data, including that it is line based: it has
width, height and bytesperline (stride).
Add these fields to struct v4l2_meta_format and document them.
Also add V4L2_FMT_FLAG_META_LINE_BASED to tell a given format is
line-based i.e. these fields of struct v4l2_meta_format are valid for it.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Generic 8-bit metadata formats define the in-memory data layout but not
the format of the data itself. The reasoning for having such formats is to
allow CSI-2 receiver drivers to receive and DMA drivers to write the data
to memory without knowing a large number of device-specific formats.
These formats may be used only in conjunction with a Media Controller
pipeline where the internal pad of the source sub-device defines the
specific format of the data (using an mbus code).
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Now that metadata mbus formats have been added, it is necessary to define
which fields in struct v4l2_mbus_format are applicable to them (not many).
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add generic serial metadata mbus formats. These formats describe data
width and packing but not the content itself. The reason for specifying
such formats is that the formats as such are fairly device specific but
they are still handled by CSI-2 receiver drivers that should not be aware
of device specific formats. What makes generic metadata formats possible
is that these formats are parsed by software only, after capturing the
data to system memory.
Also add a definition for "Data Unit" to cover what is essentially a pixel
but is not image data.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add term "stream" to the glossary of the Media subsystem documentation.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The V4L2 subdev crop API has been marked as obsolete, deprecated by the
selection API. Despite this, it has recently been extended with streams
support. In hindsight this was a mistake. Make sure it doesn't happen
again by clearly documenting that no new extensions will be accepted.
Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
release_firmware() checks for NULL pointers internally so checking
before calling it is redundant.
Link: https://lore.kernel.org/linux-media/20220606014433.290667-1-chi.minghao@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Acked-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Commit d725d20e81c2 ("media: flexcop-usb: sanity checking of endpoint type
") adds a sanity check for endpoint[1], but fails to modify the sanity
check of bNumEndpoints.
Fix this by modifying the sanity check of bNumEndpoints to 2.
Link: https://lore.kernel.org/linux-media/20220602055027.849014-1-dzm91@hust.edu.cn
Fixes: d725d20e81c2 ("media: flexcop-usb: sanity checking of endpoint type")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
High speed is no longer the ultimate in speed.
Link: https://lore.kernel.org/linux-media/20220517131109.28371-2-oneukum@suse.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
No need for GFP_ATOMIC during probe()
Link: https://lore.kernel.org/linux-media/20220517131109.28371-1-oneukum@suse.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
No need for GFP_ATOMIC during probe()
Link: https://lore.kernel.org/linux-media/20220517111049.25611-1-oneukum@suse.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The driver should disable regulators when fails to probe.
Link: https://lore.kernel.org/linux-media/20220510114852.1719018-1-zheyuma97@gmail.com
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The driver should check whether the client provides the platform_data.
The following log reveals it:
[ 29.610324] BUG: KASAN: null-ptr-deref in kmemdup+0x30/0x40
[ 29.610730] Read of size 40 at addr 0000000000000000 by task bash/414
[ 29.612820] Call Trace:
[ 29.613030] <TASK>
[ 29.613201] dump_stack_lvl+0x56/0x6f
[ 29.613496] ? kmemdup+0x30/0x40
[ 29.613754] print_report.cold+0x494/0x6b7
[ 29.614082] ? kmemdup+0x30/0x40
[ 29.614340] kasan_report+0x8a/0x190
[ 29.614628] ? kmemdup+0x30/0x40
[ 29.614888] kasan_check_range+0x14d/0x1d0
[ 29.615213] memcpy+0x20/0x60
[ 29.615454] kmemdup+0x30/0x40
[ 29.615700] lgdt3306a_probe+0x52/0x310
[ 29.616339] i2c_device_probe+0x951/0xa90
Link: https://lore.kernel.org/linux-media/20220405095018.3993578-1-zheyuma97@gmail.com
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Use checkpatch --strict --in-place to cleanup most style issues.
Then, do some manual work to fix most of the remaining issues.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Found by checkpatch.
Link: https://lore.kernel.org/linux-media/20220116112238.74171-4-micha@freedict.org
Signed-off-by: Michael Bunk <micha@freedict.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
"modinfo dvb-usb-dw2102|grep 0105" returns two lines, because the module
reports this usb alias twice.
Remove one of them.
Signed-off-by: Michael Bunk <micha@freedict.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The code ignored the I2C_M_RD flag on I2C messages. Instead it assumed
an i2c transaction with a single message must be a write operation and a
transaction with two messages would be a read operation.
Though this works for the driver code, it leads to problems once the i2c
device is exposed to code not knowing this convention. For example,
I did "insmod i2c-dev" and issued read requests from userspace, which
were translated into write requests and destroyed the EEPROM of my
device.
So, just check and respect the I2C_M_READ flag, which indicates a read
when set on a message. If it is absent, it is a write message.
Incidentally, changing from the case statement to a while loop allows
the code to lift the limitation to two i2c messages per transaction.
There are 4 more *_i2c_transfer functions affected by the same behaviour
and limitation that should be fixed in the same way.
Link: https://lore.kernel.org/linux-media/20220116112238.74171-2-micha@freedict.org
Signed-off-by: Michael Bunk <micha@freedict.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The new m88ds3101b demodulator version requires the highest bit of
register 0x11 be cleared after tuning to a new frequency to make the
lock output pin go high when a signal is found. This pin is normally
connected to an indicator led.
Link: https://lore.kernel.org/linux-media/20220116112238.74171-1-micha@freedict.org
Signed-off-by: Michael Bunk <micha@freedict.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Protect against multiple inclusions of the max9271.h header with include
guards.
Link: https://lore.kernel.org/linux-media/20220102224803.27463-1-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Fix a small indentation issue in a comment block.
Link: https://lore.kernel.org/linux-media/20220101173540.9090-1-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
It is possible that mtk_vcodec_enc_pw_on fails, and in that scenario
the PM counter is not incremented, and subsequent call to
mtk_vcodec_enc_pw_off decrements the counter, leading to a PM imbalance.
Fix by bailing out of venc_if_encode in the case when mtk_vcodec_enc_pw_on
fails.
Fixes: 4e855a6efa54 ("[media] vcodec: mediatek: Add Mediatek V4L2 Video Encoder Driver")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
In the MediaTek vcodec driver, while mtk_vcodec_mem_free() is mostly
called only when the buffer to free exists, there are some instances
that didn't do the check and triggered warnings in practice.
We believe those checks were forgotten unintentionally. Add the checks
back to fix the warnings.
Signed-off-by: Fei Shao <fshao@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In mtk_vcodec_mem_free(), there are two cases where a NULL VA is passed:
- mem->size == 0: we are called to free no memory. This may happen when
we call mtk_vcodec_mem_free() twice or the memory has never been
allocated.
- mem->size > 0: we are called to free memory but without VA. This means
that we failed to free the memory for real.
Both cases are not expected to happen, and we want to have clearer error
messages to describe which one we just encountered.
Update the error messages to include more information for that purpose.
Signed-off-by: Fei Shao <fshao@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In mtk_vcodec_mem_alloc() and mtk_vcodec_mem_free(), the value of
mem->size is not expected to change before and when using the DMA APIs
and debug print, so there's no point in keeping local copies of it.
Drop the local variable "size" in the mentioned functions, and update
printk format identifiers accordingly.
This makes the code slightly more visually consistent, and retrieve a
small amount of memory that is used for no real purpose.
Signed-off-by: Fei Shao <fshao@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
mtk_v4l2_err() already uses dev_err(), so don't print the device name
again. Print the function name instead.
Signed-off-by: Fei Shao <fshao@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Set the owner field of the async sub-devices by making
v4l2_async_register_subdev() a macro and obtaining THIS_MODULE that way.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Set a sub-device's owner field to the caller's module, provided as an
argument to the function. v4l2_device_register_subdev() becomes a macro
passing THIS_MODULE to the __v4l2_device_register_subdev() function.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Drop dev_err() and use the dev_err_probe() helper on probe path.
No functional changes intended.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Set timing-related and BLC anchor registers via cci calls instead of
hardcoding them in the register table. This prepares the driver for
implementation of configurable analogue crop and binning. No
functional change intended.
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Pixel array dimensions and default crop size do not belong to the
ov4689_mode structure, since they are mode independent. Make them
defines instead.
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The OV4689 sensor has separate red and blue gain settings (up to 4x).
Implement appropriate controls in the driver. Default gain values
are not modified.
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The OV4689 sensor supports digital gain up to 16x. Implement
corresponding control in the driver. Default digital gain value is not
modified by this patch.
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The OV4689 sensor supports horizontal and vertical flipping. Add
appropriate controls to the driver. Toggling both array flip and
digital flip bits allows to achieve flipping while maintaining output
Bayer order. Note that the default value of hflip control corresponds
to both bits set, as it was before this patch.
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Make horizontal blanking configurable. To do so, set HTS register
according to the requested horizontal blanking in ov4689_set_ctrl
instead of the register table. Default HTS value is not changed by
this patch. Minimal HTS value is found experimentally and corresponds
to 90 fps framerate at minimum vertical blanking. Real HTS value is
the register value multiplied by 4.
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
max_fps field of struct ov4689_mode is unused in this driver, so
remove it.
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Use runtime PM autosuspend to avoid powering off the sensor during
fast stop-reconfigure-restart cycles.
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
As the sensor may be accessible right after its async sub-device is
registered, enable runtime PM before doing so.
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Use sub-device active state. Employ control handler lock to
synchronize access to the active state and s_stream.
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Introduce local variable for regmap within the ov4689_set_ctrl
function. This adjustment eliminates repetition within the function.
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
