| Age | Commit message (Collapse) | Author |
|---|
|
This reverts commit feed0258e11e04b7e0, as the same issues
are already covered in another version of that patch that
was also applied (579e92ffac65c717c9c8a50feb755a).
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
commit 5126f2590bee412e3053de851cb07f531e4be36a
"v4l2-dev: add flag to have the core lock all file operations"
introduced an additional bit flag (V4L2_FL_LOCK_ALL_FOPS) that
should be set by drivers that use the v4l2 core lock for all file
operations. Since this driver has been merged at the same time as
the core changes it doesn't set this flags and thus its all file
operations except IOCTL are not properly serialized. Fix this by
adding file ops locking in the driver.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Commit bac387efbb88cf0e8df6f46a38387897cea464ee ("omap3isp: preview:
Simplify configuration parameters access") added three fields to the
preview_update structure, but failed to properly update the related
initializers. Fix this.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
The preview engine crops 4 columns and 4 lines when CFA is enabled.
Commit b2da46e52fe7871cba36e1a435844502c0eccf39 ("omap3isp: preview: Add
support for greyscale input") inverted the condition by mistake, fix
this.
Reported-by: Florian Neuhaus <florian.neuhaus@reberinformatik.ch>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Florian Neuhaus <florian.neuhaus@reberinformatik.ch>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
We need to set a timeout so we can go idle on no activity.
Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
We aren't getting any module info for the txandx option because
of a typo:
parm: txandrx:bool
Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
I am seeing a constant stream of warnings on my cx23885 based card:
cx23885_tuner_callback(): Unknown command 0x2.
Add a check in cx23885_tuner_callback to silence it.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Get the HVR-1255 analog support working for all supported inputs. This
includes introduction of a new board profile for an OEM variant which
doesn't have all the same inputs as the retail version of the board.
Validated with the following boards:
HVR-1255 (0070:2259)
Thanks to Steven Toth and Hauppauge for loaning me various boards to
regression test with.
Thanks-to: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Devin Heitmueler <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
The analog support in the cx23885 driver was completely broken for the
HVR-1250. Add the necessary code.
Note that this only implements analog for the composite and s-video
inputs. The tuner input continues to be non-functional due to a lack of
analog support in the mt2131 driver.
Validated with the following boards:
HVR-1250 (0070:7911)
Thanks to Steven Toth and Hauppauge for loaning me various boards to
regression test with.
Thanks-to: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Devin Heitmueler <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
The location of the vsrc/hsrc registers moved in the cx23888, causing
the s_mbus call to fail prematurely indicating that "720x480 is not a
valid size". The function bailed out before many pertinent registers
were set related to the scaler (causing unexpected results in video
rendering when doing raw video capture).
Use the correct registers for the cx23888.
Validated with the following boards:
HVR-1800 retail (0070:7801)
HVR-1800 OEM (0070:7809)
HVR-1850 retail (0070:8541)
Thanks to Steven Toth and Hauppauge for loaning me various boards to
regression test with.
Reported-by: Jonathan <sitten74490@mypacks.net>
Thanks-to: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Devin Heitmueler <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
The refactoring of the cx25840 driver to support the cx23888 caused breakage
with the existing support for cx23885/cx23887 analog audio support. Tweak
the code so that it only uses the code if it really is a cx23888 instead of
applying it to all cx2388x based devices.
Validated with the following boards:
HVR-1800 retail (0070:7801)
HVR-1800 OEM (0070:7809)
HVR_1850 retail (0070:8541)
Thanks to Steven Toth and Hauppauge for loaning me various boards to
regression test with.
Reported-by: Jonathan <sitten74490@mypacks.net>
Thanks-to: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Devin Heitmueler <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Fix regression in HVR-1800 analog support hue/saturation controls.
The changes made for the cx23888 caused regressions in the analog
support for cx23885/cx23887 based boards (partly due to changes in the
locations of the hue/saturation controls). As a result the wrong
registers were being overwritten.
Add code to use the correct registers if it's a cx23888
Validated with the following boards:
HVR-1800 retail (0070:7801)
HVR-1800 OEM (0070:7809)
HVR-1850 retail (0070:8541)
Thanks to Steven Toth and Hauppauge for loaning me various boards to
regression test with.
Reported-by: Jonathan <sitten74490@mypacks.net>
Thanks-to: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Devin Heitmueler <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
The refactoring of the cx25840 driver to support the cx23888 caused breakage
with the existing support for cx23885/cx23887 analog support. Rework the
routines such that the new code is only used for the 888.
Validated with the following boards:
HVR-1800 retail (0070:7801)
HVR-1800 OEM (0070:7809)
HVR_1850 retail (0070:8541)
Thanks to Steven Toth and Hauppauge for loaning me various boards to
regression test with.
Reported-by: Jonathan <sitten74490@mypacks.net>
Thanks-to: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Devin Heitmueler <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Fixed bugs in functions that initialize custom controls.
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Commit 7a6f6c29d264cdd2fe0eb3d923217eed5f0ad134 (cx231xx: use
URB_NO_TRANSFER_DMA_MAP) was intended to avoid mapping the DMA buffer
for URB twice. This works for the URBs allocated with usb_alloc_urb(),
as those are allocated from cohernent DMA pools, but the flag was also
added for the VBI and audio URBs, which have a manually allocated area.
This leaves the random trash in the structure after allocation as the
DMA address, corrupting memory and preventing VBI and audio from
working. Letting the USB core map the buffers solves the problem.
Cc: stable@kernel.org
Signed-off-by: David Dillow <dave@thedillows.org>
Cc: Sri Deevi <srinivasa.deevi@conexant.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
The logic that checks if a device has remote control is wrong.
Due to that, the em28xx RC module is not loaded by default.
Fix the logic, in order to make it work properly.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
There is a missing "up_write()" here. Semaphore should be released
before returning error value.
Cc: stable@kernel.org
Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs
Pull eCryptfs fixes from Tyler Hicks:
"Fixes an incorrect access mode check when preparing to open a file in
the lower filesystem. This isn't an urgent fix, but it is simple and
the check was obviously incorrect.
Also fixes a couple important bugs in the eCryptfs miscdev interface.
These changes are low risk due to the small number of users that use
the miscdev interface. I was able to keep the changes minimal and I
have some cleaner, more complete changes queued up for the next merge
window that will build on these patches."
* tag 'ecryptfs-3.5-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
eCryptfs: Gracefully refuse miscdev file ops on inherited/passed files
eCryptfs: Fix lockdep warning in miscdev operations
eCryptfs: Properly check for O_RDONLY flag before doing privileged open
|
|
Pull target fixes from Nicholas Bellinger:
"Two minor target fixes. There is really nothing exciting and/or
controversial this time around.
There's one fix from MDR for a RCU debug warning message within tcm_fc
code (CC'ed to stable), and a small AC fix for qla_target.c based upon
a recent Coverity static report.
Also, there is one other outstanding virtio-scsi LUN scanning bugfix
that has been uncovered with the in-flight tcm_vhost driver over the
last days, and that needs to make it into 3.5 final too. This patch
has been posted to linux-scsi again here:
http://marc.info/?l=linux-scsi&m=134160609212542&w=2
and I've asked James to include it in his next PULL request."
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
qla2xxx: print the right array elements in qlt_async_event
tcm_fc: Resolve suspicious RCU usage warnings
|
|
File operations on /dev/ecryptfs would BUG() when the operations were
performed by processes other than the process that originally opened the
file. This could happen with open files inherited after fork() or file
descriptors passed through IPC mechanisms. Rather than calling BUG(), an
error code can be safely returned in most situations.
In ecryptfs_miscdev_release(), eCryptfs still needs to handle the
release even if the last file reference is being held by a process that
didn't originally open the file. ecryptfs_find_daemon_by_euid() will not
be successful, so a pointer to the daemon is stored in the file's
private_data. The private_data pointer is initialized when the miscdev
file is opened and only used when the file is released.
https://launchpad.net/bugs/994247
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Reported-by: Sasha Levin <levinsasha928@gmail.com>
Tested-by: Sasha Levin <levinsasha928@gmail.com>
|
|
Based upon Alan's patch from Coverity scan id 793583, these debug
messages in qlt_async_event() should be starting from byte 0, which is
always the Asynchronous Event Status Code from the parent switch statement.
Also, rename reason_code -> login_code following the language used in
2500 FW spec for Port Database Changed (0x8014) -> Port Database Changed
Event Mailbox Register for mailbox[2].
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Chad Dupuis <chad.dupuis@qlogic.com>
Cc: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
Fix build error in the case of SMP=y but ARCH_SH73A0=n
introduced by:
9601e87 ARM: shmobile: fix smp build
The use of of_machine_is_compatible() will link in the
the SoC-specific symbols:
"sh73a0_get_core_count", "sh73a0_smp_prepare_cpus",
"sh73a0_secondary_init" and "sh73a0_boot_secondary".
This patch adds an ugly #ifdef wrapper as a stop-gap
solution.
Signed-off-by: Magnus Damm <damm@opensource.se>
Tested-by: Tested-by: Simon Horman <horms@verge.net.au>
Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Use rcu_dereference_protected to tell rcu that the ft_lport_lock
is held during ft_lport_create. This resolved "suspicious RCU usage"
warnings when debugging options are turned on.
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
From Lee Jones <lee.jones@linaro.org>:
* ux500/fixes-3.5:
ARM: ux500: Over-ride the DT device naming scheme for pinctrl
ARM: ux500: Fix build errors/warnings when MACH_UX500_DT is not set
of: address: Don't fail a lookup just because a node has no reg property
I ended up rebasing Lee's branch on 3.5-rc5 because we have more patches
lined for 3.6 that depend on them, and I want to keep all branches in
arm-soc be based on -rc releases rather than random commits in the
upstream history.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
When pin control mapping tables are written the registered device
name is supplied for use in name-based searches within the pinctrl
driver. In the case of the DB8500 the string "pinctrl-db8500" is
used. However, when we register the driver with Device Tree, its
naming convention uses something that looks more like "pinctrl.2".
To work around the device naming inconsistencies between devices
registered via platform code and the ones registered by Device
Tree, we use AUXDATA to over-ride the Device Tree naming scheme.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
When MACH_UX500_DT and all related Device Tree configurations are forced
off the warning and error below prevent the kernel from compiling. This
simple patch fixes both issues and allows for full build and boot of
ST-Ericsson's low-cost development board, Snowball.
Warnings fixed:
arch/arm/mach-ux500/board-mop500.c:680:32: warning: ‘snowball_of_platform_devs’ defined but not used
Errors fixed:
arch/arm/mach-ux500/timer.c: In function ‘ux500_timer_init’:
arch/arm/mach-ux500/timer.c:66:3: error: implicit declaration of function ‘of_find_matching_node’
arch/arm/mach-ux500/timer.c:66:6: warning: assignment makes pointer from integer without a cast
Cc: stable@vger.kernel.org
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Sometimes it doesn't make any sense for a node to have an address.
In this case device lookup will always be unsuccessful because we
currently assume every node will have a reg property. This patch
changes the semantics so that the resource address and the lookup
address will only be compared if one exists.
Things like AUXDATA() rely on of_dev_lookup to return the lookup
entry of a particular device in order to do things like apply
platform_data to a device. However, this is currently broken for
nodes which do not have a reg property, meaning that platform_data
can not be passed in those cases.
Acked-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
This patch is to convert port_owners type from void * to struct dev_state *
in order to make code more readable.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch rename struct ci13xxx_udc_driver and var with the type.
ci13xxx_platform_data reflect it's passed from platfrom driver.
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
allow this driver to be removed too.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
No functional changes, it will just free up some
code if we don't have hotplug.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
msm glue layer compiles on all arches just
fine. Let's drop the unnecessary ARCH check
so we have easier compile tests.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As reported by Dan Carpenter, there is a NULL check in udc_start() that
follows a dereference of the pointer that's being checked. However, at
that point udc pointer shouldn't ever be NULL and if it is, the dereference
should cause an oops.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When using urb->transfer_buffer we need to allocate physical contiguous buffers
for the entire transfer, which is pretty much guaranteed to fail with large
transfers.
Currently userspace works around this by breaking large transfers into multiple
urbs. For large bulk transfers this leads to all kind of complications.
This patch makes it possible for userspace to reliable submit large bulk
transfers to scatter-gather capable host controllers in one go, by using a
scatterlist to break the transfer up in managable chunks.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are a few (new) usbdevfs capabilities which an application cannot
discover in any other way then checking the kernel version. There are 3
problems with this:
1) It is just not very pretty.
2) Given the tendency of enterprise distros to backport stuff it is not
reliable.
3) As discussed in length on the mailinglist, USBDEVFS_URB_BULK_CONTINUATION
does not work as it should when combined with USBDEVFS_URB_SHORT_NOT_OK
(which is its intended use) on devices attached to an XHCI controller.
So the availability of these features can be host controller dependent,
making depending on them based on the kernel version not a good idea.
This patch besides adding the new ioctl also adds flags for the following
existing capabilities:
USBDEVFS_CAP_ZERO_PACKET, available since 2.6.31
USBDEVFS_CAP_BULK_CONTINUATION, available since 2.6.32, except for XHCI
USBDEVFS_CAP_NO_PACKET_SIZE_LIM, available since 3.3
Note that this patch only does not advertise the USBDEVFS_URB_BULK_CONTINUATION
cap for XHCI controllers, bulk transfers with this flag set will still be
accepted when submitted to XHCI controllers.
Returning -EINVAL for them would break existing apps, and in most cases the
troublesome scenario wrt USBDEVFS_URB_SHORT_NOT_OK urbs on XHCI controllers
will never get hit, so this would break working use cases.
The disadvantage of not returning -EINVAL is that cases were it is causing
real trouble may go undetected / the cause of the trouble may be unclear,
but this is the best we can do.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
iso data buffers may have holes in them if some packets were short, so for
iso urbs we should always copy the entire buffer, just like the regular
processcompl does.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
CC: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixed coding style issue related to
prohibited space in drivers/usb/class/cdc-acm.c
Signed-off-by: Jeffrin Jose <ahiliation@yahoo.co.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The devm_ functions allocate memory that is released when a driver
detaches. This makes the code smaller and a bit simpler.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The devm_ functions allocate memory that is released when a driver
detaches. This makes the code smaller and a bit simpler.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch adds clock gating to suspend and resume functions.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pull two MTD fixes from David Woodhouse:
- Fix a logic error in OLPC CAFÉ NAND ready() function.
- Fix regression due to bitflip handling changes.
* tag 'for-linus-20120706' of git://git.infradead.org/linux-mtd:
mtd: cafe_nand: fix an & vs | mistake
mtd: nand: initialize bitflip_threshold prior to BBT scanning
|
|
Otherwise the code races with munmap (causing a use-after-free
of the vma) or with close (causing a use-after-free of the struct
file).
The bug was introduced by commit 90ed52ebe481 ("[PATCH] holepunch: fix
mmap_sem i_mutex deadlock")
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Miklos Szeredi <mszeredi@suse.cz>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2
Pull ocfs2 fixes from Joel Becker.
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
aio: make kiocb->private NUll in init_sync_kiocb()
ocfs2: Fix bogus error message from ocfs2_global_read_info
ocfs2: for SEEK_DATA/SEEK_HOLE, return internal error unchanged if ocfs2_get_clusters_nocache() or ocfs2_inode_lock() call failed.
ocfs2: use spinlock irqsave for downconvert lock.patch
ocfs2: Misplaced parens in unlikley
ocfs2: clear unaligned io flag when dio fails
|
|
Pull cifs fixes from Steve French.
* git://git.samba.org/sfrench/cifs-2.6:
cifs: when server doesn't set CAP_LARGE_READ_X, cap default rsize at MaxBufferSize
cifs: fix parsing of password mount option
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input layer fixes from Dmitry Torokhov:
"Two fixes for regressions in Wacom driver and fixes for drivers using
threaded IRQ framework without specifying IRQF_ONESHOT."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: request threaded-only IRQs with IRQF_ONESHOT
Input: wacom - don't retrieve touch_max when it is predefined
Input: wacom - fix retrieving touch_max bug
Input: fix input.h kernel-doc warning
|
|
We suppress printing kmsg records to the console, which are already printed
immediately while we have received their fragments.
Newly registered boot consoles print the entire kmsg buffer during
registration. Clear the console-suppress flag after we skipped the record
during its first storage, so any later print will see these records as usual.
Signed-off-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The /proc/kmsg read() interface is internally simply wired up to a sequence
of syslog() syscalls, which might are racy between their checks and actions,
regarding concurrency.
In the (very uncommon) case of concurrent readers of /dev/kmsg, relying on
usual O_NONBLOCK behavior, the recently introduced mutex might block an
O_NONBLOCK reader in read(), when poll() returns for it, but another process
has already read the data in the meantime. We've seen that while running
artificial test setups and tools that "fight" about /proc/kmsg data.
This restores the original /proc/kmsg behavior, where in case of concurrent
read()s, poll() might wake up but the read() syscall will just return 0 to
the caller, while another process has "stolen" the data.
This is in the general case not the expected behavior, but it is the exact
same one, that can easily be triggered with a 3.4 kernel, and some tools
might just rely on it.
The mutex is not needed, the original integrity issue which introduced it,
is in the meantime covered by:
"fill buffer with more than a single message for SYSLOG_ACTION_READ"
116e90b23f74d303e8d607c7a7d54f60f14ab9f2
Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
After the recent split of facility and level into separate variables,
we miss the facility value (always 0 for kernel-originated messages)
in the syslog prefix.
On Tue, Jul 3, 2012 at 12:45 PM, Dan Carpenter <dan.carpenter@oracle.com> wrote:
> Static checkers complain about the impossible condition here.
>
> In 084681d14e ('printk: flush continuation lines immediately to
> console'), we changed msg->level from being a u16 to being an unsigned
> 3 bit bitfield.
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Non-printable characters in the log data are hex-escaped to ensure safe
post processing. We need to escape a backslash we find in the data, to be
able to distinguish it from a backslash we add for the escaping.
Also escape the non-printable character 127.
Thanks to Miloslav Trmac for the heads up.
Reported-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In function devkmsg_read/writev/llseek/poll/open()..., the function
raw_spin_lock/unlock is used, there is potential deadlock case happening.
CPU1: thread1 doing the cat /dev/kmsg:
raw_spin_lock(&logbuf_lock);
while (user->seq == log_next_seq) {
when thread1 run here, at this time one interrupt is coming on CPU1 and running
based on this thread,if the interrupt handle called the printk which need the
logbuf_lock spin also, it will cause deadlock.
So we should use raw_spin_lock/unlock_irq here.
Acked-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: liu chuansheng <chuansheng.liu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
