| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"The core clk framework is left largely untouched this time around
except for support for the newly ratified DT property
'assigned-clock-rates-u64'.
I'm much more excited about the support for loading DT overlays from
KUnit tests so that we can test how the clk framework parses DT nodes
during clk registration. The clk framework has some places that are
highly DeviceTree dependent so this charts the path to extend the
KUnit tests to cover even more framework code in the future. I've got
some more tests on the list that use the DT overlay support, but they
uncovered issues with clk unregistration that I'm still working on
fixing.
Outside the core, the clk driver update pile is dominated by Qualcomm
and Renesas SoCs, making it fairly usual. Looking closer, there are
fixes for things all over the place, like adding missing clk
frequencies or moving defines for the number of clks out of DT binding
headers into the drivers. There are even conversions of DT bindings to
YAML and migration away from strings to describe clk topology. Overall
it doesn't look unusual so I expect the new drivers to be where we'll
have fixes in the coming weeks.
Core:
- KUnit tests for clk registration and fixed rate basic clk type
- A couple more devm helpers, one consumer and one provider
- Support for assigned-clock-rates-u64
New Drivers:
- Camera, display and GPU clocks on Qualcomm SM4450
- Camera clocks on Qualcomm SM8150
- Rockchip rk3576 clks
- Microchip SAM9X7 clks
- Renesas RZ/V2H(P) (R9A09G057) clks
Updates:
- Mark a bunch of struct freq_tbl const to reduce .data usage
- Add Qualcomm MSM8226 A7PLL and Regera PLL support
- Fix the Qualcomm Lucid 5LPE PLL configuration sequence to not reuse
Trion, as they do differ
- A number of fixes to the Qualcomm SM8550 display clock driver
- Fold Qualcomm SM8650 display clock driver into SM8550 one
- Add missing clocks and GDSCs needed for audio on Qualcomm MSM8998
- Add missing USB MP resets, GPLL9, and QUPv3 DFS to Qualcomm SC8180X
- Fix sdcc clk frequency tables on Qualcomm SC8180X
- Drop the Qualcomm SM8150 gcc_cpuss_ahb_clk_src
- Mark Qualcomm PCIe GDSCs as RET_ON on sm8250 and sm8540 to avoid
them turning off during suspend
- Use the HW_CTRL mechanism on Qualcomm SM8550 video clock controller
GDSCs
- Get rid of CLK_NR_CLKS defines in Rockchip DT binding headers
- Some fixes for Rockchip rk3228 and rk3588
- Exynos850: Add clock for Thermal Management Unit
- Exynos7885: Fix duplicated ID in the header, add missing TOP PLLs
and add clocks for USB block in the FSYS clock controller
- ExynosAutov9: Add DPUM clock controller
- ExynosAutov920: Add new (first) clock controllers: TOP and PERIC0
(and a bit more complete bindings)
- Use clk_hw pointer instead of fw_name for acm_aud_clk[0-1]_sel
clocks on i.MX8Q as parents in ACM provider
- Add i.MX95 NETCMIX support to the block control provider
- Fix parents for ENETx_REF_SEL clocks on i.MX6UL
- Add USB clocks, resets and power domains on Renesas RZ/G3S
- Add Generic Timer (GTM), I2C Bus Interface (RIIC), SD/MMC Host
Interface (SDHI) and Watchdog Timer (WDT) clocks and resets on
Renesas RZ/V2H
- Add PCIe, PWM, and CAN-FD clocks on Renesas R-Car V4M
- Add LCD controller clocks and resets on Renesas RZ/G2UL
- Add DMA clocks and resets on Renesas RZ/G3S
- Add fractional multiplication PLL support on Renesas R-Car Gen4
- Document support for the Renesas RZ/G2M v3.0 (r8a774a3) SoC
- Support for the Microchip SAM9X7 SoC as follows:
- Updates for the Microchip PLL drivers
- DT binding documentation updates (for the new clock driver and for
the slow clock controller that SAM9X7 is using)
- A fix for the Microchip SAMA7G5 clock driver to avoid allocating
more memory than necessary
- Constify some Amlogic structs
- Add SM1 eARC clocks for Amlogic
- Introduce a symbol namespace for Amlogic clock specific symbols
- Add reset controller support to audiomix block control on i.MX
- Add CLK_SET_RATE_PARENT flag to all audiomix clocks and to i.MX7D
lcdif_pixel_src clock
- Fix parent clocks for earc_phy and audpll on i.MX8MP
- Fix default parents for enet[12]_ref_sel on i.MX6UL
- Add ops in composite 8M and 93 that allow no-op on disable
- Add check for PCC present bit on composite 7ULP register
- Fix fractional part for fracn-gppll on prepare in i.MX
- Fix clock tree update for TF-A managed clocks on i.MX8M
- Drop CLK_SET_PARENT_GATE for DRAM mux on i.MX7D
- Add the SAI7 IPG clock for i.MX8MN
- Mark the 'nand_usdhc_bus' clock as non-critical on i.MX8MM
- Add LVDS bypass clocks on i.MX8QXP
- Add muxes for MIPI and PHY ref clocks on i.MX
- Reorder dc0_bypass0_clk, lcd_pxl and dc1_disp clocks on i.MX8QXP
- Add 1039.5MHz and 800MHz rates to fracn-gppll table on i.MX
- Add CLK_SET_RATE_PARENT for media_disp pixel clocks on i.MX8QXP
- Add some module descriptions to the i.MX generic and the i.MXRT1050
driver
- Fix return value for bypass for composite i.MX7ULP
- Move Mediatek clk bindings to clock/
- Convert some more clk bindings to dt schema"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (180 commits)
clk: Switch back to struct platform_driver::remove()
dt-bindings: clock, reset: fix top-comment indentation rk3576 headers
clk: rockchip: remove unused mclk_pdm0_p/pdm0_p definitions
clk: provide devm_clk_get_optional_enabled_with_rate()
clk: fixed-rate: add devm_clk_hw_register_fixed_rate_parent_data()
clk: imx6ul: fix clock parent for IMX6UL_CLK_ENETx_REF_SEL
clk: renesas: r9a09g057: Add clock and reset entries for GTM/RIIC/SDHI/WDT
clk: renesas: rzv2h: Add support for dynamic switching divider clocks
clk: renesas: r9a08g045: Add clocks, resets and power domains for USB
clk: rockchip: fix error for unknown clocks
clk: rockchip: rk3588: drop unused code
clk: rockchip: Add clock controller for the RK3576
clk: rockchip: Add new pll type pll_rk3588_ddr
dt-bindings: clock, reset: Add support for rk3576
dt-bindings: clock: rockchip,rk3588-cru: drop unneeded assigned-clocks
clk: rockchip: rk3588: Fix 32k clock name for pmu_24m_32k_100m_src_p
clk: imx95: enable the clock of NETCMIX block control
dt-bindings: clock: add RMII clock selection
dt-bindings: clock: add i.MX95 NETCMIX block control
clk: imx: imx8: Use clk_hw pointer for self registered clock in clk_parent_data
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"I2C core:
- finally remove the I2C_COMPAT symbol after 15 years of deprecation
- lock client addresses during initialization to prevent race
conditions between different kinds of instantiation
- use scoped foreach OF child loops
- testunit cleanups and documentation improvements, as well as two
new tests, one for repeated start and one for triggering SMBusAlert
interrupts
I2C host drivers:
- DesignWare and Renesas I2C driver updates.
The first has has undergone through a series of cleanups that have
been sent to the mailing list a year ago for the first time and
finally get merged in this pull request. They are many, from typos
(e.g. i2/i2c), to cosmetics, to refactoring (e.g. move inline
functions to librarieas) and many others.
- all the DesignWare Kconfig options have been grouped under the
I2C_DESIGNWARE_CORE and this required some adaptation in many of
the kernel configuration files for different arm and mips boards
Cleanups:
- improve the exit path in the runtime resume function for the
Qualcomm Geni platform
- get rid of the unused "target_addr" parameter in the Intel LJCA
driver
- intialize the restart_flag in the MediaTek controller in one single
place
- constify a few global data structures in the virtio driver
- simplify the bus speed handling in the Renesas driver init function
making it more readable
- improved probe function of the Renesas R-Car driver
- switch the iMX/MXC driver to use RUNTIME_PM_OPS() instead of
SET_RUNTIME_PM_OPS()
- iMX/MXC driver cleanups
- use devm_clk_get_enabled() to simplify the Renesas EMEV2, Ingenic
and MPC drivers
Refactoring:
- Fix a potential out of boundary array access in the Nuvoton driver.
This is not a bug fix because the issue could never occur due to
hardware not having the properties listed in the array. The change
makes the driver more future proof and, at the same time, silences
code analyzers.
Improvements:
- several patches improving the runtime power management handling of
the Renesas I2C (riic) driver
- use a more descriptive adapter name in the Intel i801 driver to
show the presence of the IDF feature
- kill pending transactions when irq's can't complete their handling
in the Intel Denverton (ismt) driver, triggering a timeout
New Feature:
- support fast mode plus in the Renesas I2C (riic) driver
New support:
- Added support for:
- Renesas R9A08G045
- Rockchip RK3576
- KEBA I2C
- Theobroma Systems Mule Multiplexer.
- new i2c-keba.c driver
- new driver for The Mule i2c multiplexer
Core I2C framework:
- move runtime PM functions in order to allow them to be accessed
during device add
Devicetree:
- nVidia and Qualcomm binding improvements
- get rid of redundant "multi-master" property in the aspeed binding
- convert i2c-sprd binding to YAML
AT24 updates:
- document a new model from giantec in DT bindings"
* tag 'i2c-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (69 commits)
i2c: designware: Use pci_get_drvdata()
i2c: designware: Propagate firmware node
i2c: designware: Uninline i2c_dw_probe()
i2c: ljca: Remove unused "target_addr" parameter
i2c: keba: Add KEBA I2C controller support
i2c: i801: Use a different adapter-name for IDF adapters
i2c: core: Setup i2c_adapter runtime-pm before calling device_add()
dt-bindings: i2c: i2c-sprd: convert to YAML
i2c: ismt: kill transaction in hardware on timeout
i2c: designware: Group all DesignWare drivers under a single option
net: txgbe: Fix I2C Kconfig dependencies
RISC-V: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
mips: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
arm64: defconfig: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
ARM: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
ARC: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
i2c: virtio: Constify struct i2c_algorithm and struct virtio_device_id
i2c: rcar: tidyup priv->devtype handling on rcar_i2c_probe()
i2c: imx: Convert comma to semicolon
i2c: jz4780: Use devm_clk_get_enabled() helpers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Ira Weiny:
- use Open Firmware helper routines
- fix memory leak when nvdimm labels are incorrect
- remove some dead code
* tag 'libnvdimm-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm: Remove dead code for ENODEV checking in scan_labels()
nvdimm: Fix devs leaks in scan_labels()
nvdimm: Use of_property_present() and of_property_read_bool()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight update from Lee Jones:
- Added a check for the return value of spi_setup() in the l4f00242t03
driver to catch errors
* tag 'backlight-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: l4f00242t03: Add check for spi_setup
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
- Limited LED current based on thermal conditions in the QCOM flash LED
driver
- Fixed device child node usage in the BD2606MVV and PCA995x drivers
- Used device_for_each_child_node_scoped() to access child nodes in the
IS31FL319X driver
- Reset the LED controller during the probe in the LM3601X driver
- Used device_for_each_child_node() to access device child nodes in the
PCA995X driver
- Fixed CONFIG_LEDS_CLASS_MULTICOLOR dependency in the BlinkM driver
- Replaced msleep() with usleep_range() in the SUN50I-A100 driver
- Used scoped device node handling to simplify error paths in the
AAT1290, KTD2692, and MC13783 drivers
- Added missing of_node_get for probe duration in the MAX77693 driver
- Simplified using for_each_available_child_of_node_scoped() loops when
iterating over device nodes
- Used devm_clk_get_enabled() helpers in the LP55XX driver
- Converted DT bindings from TXT to YAML format for various drivers,
including LM3692x and SC2731-BLTC
- Set num_leds after allocation in the GPIO driver
- Removed irrelevant blink configuration error message in the PCA9532
driver
- Fixed module autoloading with MODULE_DEVICE_TABLE() in the Turris
Omnia driver
* tag 'leds-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (38 commits)
leds: turris-omnia: Fix module autoloading with MODULE_DEVICE_TABLE()
leds: pca9532: Remove irrelevant blink configuration error message
leds: gpio: Set num_leds after allocation
dt-bindings: leds: Convert leds-lm3692x to YAML format
leds: lp55xx: Use devm_clk_get_enabled() helpers
leds: as3645a: Use device_* to iterate over device child nodes
leds: qcom-lpg: Simplify with scoped for each OF child loop
leds: turris-omnia: Simplify with scoped for each OF child loop
leds: sc27xx: Simplify with scoped for each OF child loop
leds: pca9532: Simplify with scoped for each OF child loop
leds: netxbig: Simplify with scoped for each OF child loop
leds: mt6323: Simplify with scoped for each OF child loop
leds: mc13783: Use scoped device node handling to simplify error paths
leds: lp55xx: Simplify with scoped for each OF child loop
leds: is31fl32xx: Simplify with scoped for each OF child loop
leds: bcm6358: Simplify with scoped for each OF child loop
leds: bcm6328: Simplify with scoped for each OF child loop
leds: aw2013: Simplify with scoped for each OF child loop
leds: 88pm860x: Simplify with scoped for each OF child loop
leds: max77693: Simplify with scoped for each OF child loop
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
- Added support for the Analog Devices ADP5585 GPIO and PWM functions
- Added parsing of GPIO hogs for the ADP5585
- Fixed module autoloading in the MAX14577 driver
- Simplified and cleaned up the CROS_EC driver
- Made the Lenovo Yoga Tab 3 X90F DMI match less strict in the
INTEL_SOC_PMIC_CHTWC driver
- Added support for the RK806 PMIC on the I2C bus
- Removed the remaining header file for the DS1WM driver
- Added compatible strings for various devices in the device tree
bindings
- Fixed a comma-related issue in the 88PM860X_CORE driver
- Constified read-only regmap structs in various drivers
- Used scoped variables with memory allocators to simplify error paths
in the MT6360 and SYSCON drivers
- Added Intel Arrow Lake-H and Panther Lake LPSS PCI IDs
* tag 'mfd-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (44 commits)
mfd: atc260x: Convert a bunch of commas to semicolons
dt-bindings: mfd: qcom,tcsr: Add compatible for sa8775p
mfd: intel-lpss: Add Intel Panther Lake LPSS PCI IDs
mfd: intel-lpss: Add Intel Arrow Lake-H LPSS PCI IDs
dt-bindings: mfd: syscon: Add rk3576 QoS register compatible
dt-bindings: mfd: adp5585: Add parsing of hogs
mfd: tc3589x: Drop vendorless compatible string from match table
mfd: qcom-spmi-pmic: Use for_each_child_of_node_scoped()
mfd: max77620: Use for_each_child_of_node_scoped()
mfd: intel_soc_pmic_chtwc: Make Lenovo Yoga Tab 3 X90F DMI match less strict
mfd: cros_ec: Update module description
mfd: cros_ec: Simplify and clean-up cros_ec_dev_init()
mfd: max14577: Provide MODULE_DEVICE_TABLE() to fix module autoloading
mfd: rk8xx: Add support for rk806 on i2c bus
dt-bindings: mfd: syscon: Add ti,j784s4-acspcie-proxy-ctrl compatible
mfd: ds1wm: Remove remaining header file
MAINTAINERS: Repair file entry in MARVELL 88PM886 PMIC DRIVER
mfd: 88pm860x-core: Convert comma to semicolon
mfd: syscon: Use scoped variables with memory allocators to simplify error paths
mfd: mt6360: Use scoped variables with memory allocators to simplify error paths
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"Unusually, more new driver and device support than updates. Couple of
new device support, AMD, Rcar, Intel and New drivers in Freescale,
Loonsoon, AMD and LPC32XX with DT conversion and mode updates etc.
New support:
- Support for AMD Versal Gen 2 DMA IP
- Rcar RZ/G3S SoC dma controller
- Support for Intel Diamond Rapids and Granite Rapids-D dma controllers
- Support for Freescale ls1021a-qdma controller
- New driver for Loongson-1 APB DMA
- New driver for AMD QDMA
- Pl08x in LPC32XX router dma driver
Updates:
- Support for dpdma cyclic dma mode
- XML conversion for marvell xor dma bindings
- Dma clocks documentation for imx dma"
* tag 'dmaengine-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (24 commits)
dmaengine: loongson1-apb-dma: Fix the build warning caused by the size of pdev_irqname
dmaengine: Fix spelling mistakes
dmaengine: Add dma router for pl08x in LPC32XX SoC
dmaengine: fsl-edma: add edma src ID check at request channel
dmaengine: fsl-edma: change to guard(mutex) within fsl_edma3_xlate()
dmaengine: avoid non-constant format string
dmaengine: imx-dma: Remove i.MX21 support
dt-bindings: dma: fsl,imx-dma: Document the DMA clocks
dmaengine: Loongson1: Add Loongson-1 APB DMA driver
dt-bindings: dma: Add Loongson-1 APB DMA
dmaengine: zynqmp_dma: Add support for AMD Versal Gen 2 DMA IP
dt-bindings: dmaengine: zynqmp_dma: Add a new compatible string
dmaengine: idxd: Add new DSA and IAA device IDs for Diamond Rapids platform
dmaengine: idxd: Add a new DSA device ID for Granite Rapids-D platform
dmaengine: ti: k3-udma: Remove unused declarations
dmaengine: amd: qdma: Add AMD QDMA driver
dmaengine: xilinx: dpdma: Add support for cyclic dma mode
dma: ipu: Remove include/linux/dma/ipu-dma.h
dt-bindings: dma: fsl-mxs-dma: Add compatible string "fsl,imx8qxp-dma-apbh"
dt-bindings: fsl-qdma: allow compatible string fallback to fsl,ls1021a-qdma
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"New hw support:
- Rcar usb2 support for RZ/G3S SoC
- Nuvoton MA35 SoC USB 2.0 PHY driver
Removed:
- obsolete qcom,usb-8x16-phy bindings
Updates:
- 4 lane PCIe support for Qualcomm X1E80100
- Constify structure in subsystem update
- Subsystem simplification with scoped for each OF child loop update
- Yaml conversion for Qualcomm sata phy, Hiilicon hi3798cv200-combphy
bindings"
* tag 'phy-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (40 commits)
phy: renesas: rcar-gen3-usb2: Add support for the RZ/G3S SoC
dt-bindings: phy: renesas,usb2-phy: Document RZ/G3S phy bindings
phy: renesas: rcar-gen3-usb2: Add support to initialize the bus
phy: ti: j721e-wiz: Simplify with scoped for each OF child loop
phy: ti: j721e-wiz: Drop OF node reference earlier for simpler code
phy: ti: gmii-sel: Simplify with dev_err_probe()
phy: ti: am654-serdes: Use scoped device node handling to simplify error paths
phy: qcom: qmp-pcie-msm8996: Simplify with scoped for each OF child loop
phy: mediatek: xsphy: Simplify with scoped for each OF child loop
phy: mediatek: tphy: Simplify with scoped for each OF child loop
phy: hisilicon: usb2: Simplify with scoped for each OF child loop
phy: cadence: sierra: Simplify with scoped for each OF child loop
phy: broadcom: brcm-sata: Simplify with scoped for each OF child loop
phy: broadcom: bcm-cygnus-pcie: Simplify with scoped for each OF child loop
phy: nuvoton: add new driver for the Nuvoton MA35 SoC USB 2.0 PHY
dt-bindings: phy: nuvoton,ma35-usb2-phy: add new bindings
phy: qcom: qmp-pcie: Configure all tables on port B PHY
phy: airoha: adjust initialization delay in airoha_pcie_phy_init()
dt-bindings: phy: socionext,uniphier: add top-level constraints
phy: qcom: qmp-pcie: Add Gen4 4-lanes mode for X1E80100
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- bus cleanup for warnings and probe deferral errors suppression
- cadence recheck for status with a delayed work
- intel interrupt rework on reset exit
* tag 'soundwire-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel_bus_common: enable interrupts before exiting reset
soundwire: cadence: re-check Peripheral status with delayed_work
soundwire: bus: clean up probe warnings
soundwire: bus: drop unused driver name field
soundwire: bus: suppress probe deferral errors
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Add Watchdog Timer driver for RZ/V2H(P)
- Add Cirrus EP93x
- Some small fixes and improvements
* tag 'linux-watchdog-6.12-rc1' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: Convert comma to semicolon
watchdog: rzv2h_wdt: Add missing MODULE_LICENSE tag to fix modpost error
dt-bindings: watchdog: Add Cirrus EP93x
dt-bindings: watchdog: stm32-iwdg: Document interrupt and wakeup properties
drivers: watchdog: marvell_gti: Convert comma to semicolon
watchdog: iTCO_wdt: Convert comma to semicolon
watchdog: Add Watchdog Timer driver for RZ/V2H(P)
dt-bindings: watchdog: renesas,wdt: Document RZ/V2H(P) SoC
watchdog: imx_sc_wdt: detect if already running
watchdog: imx2_wdt: Remove __maybe_unused notations
watchdog: imx_sc_wdt: Don't disable WDT in suspend
watchdog: imx7ulp_wdt: move post_rcs_wait into struct imx_wdt_hw_feature
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Core changes:
- Add support for "input-schmitt-microvolt" property, as used in the
Sophgo SoC
New drivers:
- Mobileye EyeQ5 pin controller, I think this is an automotive SoC
- Rockchip rk3576 pin control support
- Sophgo CV1800 series pin controllers: CV1800B, CV1812H and SG2000
Improvements:
- Gradual improvements to Renesas, Samsung, Qualcomm, Nuvoton and a
few other drivers"
* tag 'pinctrl-v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (67 commits)
pinctrl: intel: Constify struct intel_pinctrl parameter
pinctrl: Remove redundant null pointer checks in pinctrl_remove_device_debugfs()
pinctrl: baytrail: Drop duplicate return statement
pinctrl: intel: Inline intel_gpio_community_irq_handler()
dt-bindings: pinctrl: qcom: add missing type to GPIO hogs
pinctrl: madera: Simplify with dev_err_probe()
pinctrl: k210: Use devm_clk_get_enabled() helpers
pinctrl: Join split messages and remove double whitespace
pinctrl: renesas: rzg2l: Move pinconf_to_config_argument() call outside of switch cases
pinctrl: renesas: rzg2l: Introduce single macro for digital noise filter configuration
pinctrl: renesas: rzg2l: Replace of_node_to_fwnode() with more suitable API
pinctrl: mvebu: Fix devinit_dove_pinctrl_probe function
pinctrl: sunxi: Use devm_clk_get_enabled() helpers
pinctrl: sophgo: cv18xx: fix missed __iomem type identifier
pinctrl: stmfx: Use string_choices API instead of ternary operator
pinctrl: nomadik: Use kmemdup_array instead of kmemdup for multiple allocation
pinctrl: intel: Introduce for_each_intel_gpio_group() helper et al.
pinctrl: intel: Constify intel_get_community() returned object
pinctrl: intel: Implement high impedance support
pinctrl: intel: Add __intel_gpio_get_direction() helper
...
|
|
Pull PCIe non-transparent bridge updates from Jon Mason:
"Bug fixes for intel ntb driver debugfs, use after free in switchtec
driver, ntb transport rx ring buffers. Also, cleanups in printks,
kernel-docs, and idt driver comment"
* tag 'ntb-6.12' of https://github.com/jonmason/ntb:
ntb: Force physically contiguous allocation of rx ring buffers
ntb: ntb_hw_switchtec: Fix use after free vulnerability in switchtec_ntb_remove due to race condition
ntb: idt: Fix the cacography in ntb_hw_idt.c
NTB: epf: don't misuse kernel-doc marker
NTB: ntb_transport: fix all kernel-doc warnings
ntb: Constify struct bus_type
ntb_perf: Fix printk format
ntb: intel: Fix the NULL vs IS_ERR() bug for debugfs_create_dir()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire updates from Takashi Sakamoto:
"In the FireWire subsystem, tasklets have been used as the bottom half
of 1394 OHCi hardIRQ. In recent kernel updates, BH workqueues have
become available, and some developers have proposed replacing the
tasklet with a BH workqueue.
As a first step towards dropping tasklet use, the 1394 OHCI
isochronous context can use regular workqueues. In this context, the
batch of packets is processed in the specific queue, thus the timing
jitter caused by task scheduling is not so critical.
Additionally, DMA transmission can be scheduled per-packet basis,
therefore the context can be sleep between the operation of
transmissions. Furthermore, in-kernel protocol implementation involves
some CPU-bound tasks, which can sometimes consumes CPU time so long.
These characteristics suggest that normal workqueues are suitable,
through BH workqueues are not.
The replacement with a workqueue allows unit drivers to process the
content of packets in non-atomic context. It brings some reliefs to
some drivers in sound subsystem that spin-lock is not mandatory
anymore during isochronous packet processing.
Summary:
- Replace tasklet with workqueue for isochronous context
- Replace IDR with XArray
- Utilize guard macro where possible
- Print deprecation warning when enabling debug parameter of
firewire-ohci module
- Switch to nonatomic PCM operation"
* tag 'firewire-updates-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: (55 commits)
firewire: core: rename cause flag of tracepoints event
firewire: core: update documentation of kernel APIs for flushing completions
firewire: core: add helper function to retire descriptors
Revert "firewire: core: move workqueue handler from 1394 OHCI driver to core function"
Revert "firewire: core: use mutex to coordinate concurrent calls to flush completions"
firewire: core: use mutex to coordinate concurrent calls to flush completions
firewire: core: move workqueue handler from 1394 OHCI driver to core function
firewire: core: fulfill documentation of fw_iso_context_flush_completions()
firewire: core: expose kernel API to schedule work item to process isochronous context
firewire: core: use WARN_ON_ONCE() to avoid superfluous dumps
ALSA: firewire: use nonatomic PCM operation
firewire: core: non-atomic memory allocation for isochronous event to user client
firewire: ohci: operate IT/IR events in sleepable work process instead of tasklet softIRQ
firewire: core: add local API to queue work item to workqueue specific to isochronous contexts
firewire: core: allocate workqueue to handle isochronous contexts in card
firewire: ohci: obsolete direct usage of printk_ratelimit()
firewire: ohci: deprecate debug parameter
firewire: core: update fw_device outside of device_find_child()
firewire: ohci: fix error path to detect initiated reset in TI TSB41BA3D phy
firewire: core/ohci: minor refactoring for computation of configuration ROM size
...
|
|
Add missing terminator to list of unit tests to avoid random crashes seen
when running the test.
Fixes: 10ca05a76065 ("ipe: kunit test for parser")
Cc: Deven Bowers <deven.desai@linux.microsoft.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Fan Wu <wufan@linux.microsoft.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Fan Wu <wufan@linux.microsoft.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Wait for device readiness after reset by polling Vendor ID and
looking for Configuration RRS instead of polling the Command
register and looking for non-error completions, to avoid hardware
retries done for RRS on non-Vendor ID reads (Bjorn Helgaas)
- Rename CRS Completion Status to RRS ('Request Retry Status') to
match PCIe r6.0 spec usage (Bjorn Helgaas)
- Clear LBMS bit after a manual link retrain so we don't try to
retrain a link when there's no downstream device anymore (Maciej W.
Rozycki)
- Revert to the original link speed after retraining fails instead of
leaving it restricted to 2.5GT/s, so a future device has a chance
to use higher speeds (Maciej W. Rozycki)
- Wait for each level of downstream bus, not just the first, to
become accessible before restoring devices on that bus (Ilpo
Järvinen)
- Add ARCH_PCI_DEV_GROUPS so s390 can add its own attribute_groups
without having to stomp on the core's pdev->dev.groups (Lukas
Wunner)
Driver binding:
- Export pcim_request_region(), a managed counterpart of
pci_request_region(), for use by drivers (Philipp Stanner)
- Export pcim_iomap_region() and deprecate pcim_iomap_regions()
(Philipp Stanner)
- Request the PCI BAR used by xboxvideo (Philipp Stanner)
- Request and map drm/ast BARs with pcim_iomap_region() (Philipp
Stanner)
MSI:
- Add MSI_FLAG_NO_AFFINITY flag for devices that mux MSIs onto a
single IRQ line and cannot set the affinity of each MSI to a
specific CPU core (Marek Vasut)
- Use MSI_FLAG_NO_AFFINITY and remove unnecessary .irq_set_affinity()
implementations in aardvark, altera, brcmstb, dwc, mediatek-gen3,
mediatek, mobiveil, plda, rcar, tegra, vmd, xilinx-nwl,
xilinx-xdma, and xilinx drivers to avoid 'IRQ: set affinity failed'
warnings (Marek Vasut)
Power management:
- Add pwrctl support for ATH11K inside the WCN6855 package (Konrad
Dybcio)
PCI device hotplug:
- Remove unnecessary hpc_ops struct from shpchp (ngn)
- Check for PCI_POSSIBLE_ERROR(), not 0xffffffff, in cpqphp
(weiyufeng)
Virtualization:
- Mark Creative Labs EMU20k2 INTx masking as broken (Alex Williamson)
- Add an ACS quirk for Qualcomm SA8775P, which doesn't advertise ACS
but does provide ACS-like features (Subramanian Ananthanarayanan)
IOMMU:
- Add function 0 DMA alias quirk for Glenfly Arise audio function,
which uses the function 0 Requester ID (WangYuli)
NPEM:
- Add Native PCIe Enclosure Management (NPEM) support for sysfs
control of NVMe RAID storage indicators (ok/fail/locate/
rebuild/etc) (Mariusz Tkaczyk)
- Add support for the ACPI _DSM PCIe SSD status LED management, which
is functionally similar to NPEM but mediated by platform firmware
(Mariusz Tkaczyk)
Device trees:
- Drop minItems and maxItems from ranges in PCI generic host binding
since host bridges may have several MMIO and I/O port apertures
(Frank Li)
- Add kirin, rcar-gen2, uniphier DT binding top-level constraints for
clocks (Krzysztof Kozlowski)
Altera PCIe controller driver:
- Convert altera DT bindings from text to YAML (Matthew Gerlach)
- Replace TLP_REQ_ID() with macro PCI_DEVID(), which does the same
thing and is what other drivers use (Jinjie Ruan)
Broadcom STB PCIe controller driver:
- Add DT binding maxItems for reset controllers (Jim Quinlan)
- Use the 'bridge' reset method if described in the DT (Jim Quinlan)
- Use the 'swinit' reset method if described in the DT (Jim Quinlan)
- Add 'has_phy' so the existence of a 'rescal' reset controller
doesn't imply software control of it (Jim Quinlan)
- Add support for many inbound DMA windows (Jim Quinlan)
- Rename SoC 'type' to 'soc_base' express the fact that SoCs come in
families of multiple similar devices (Jim Quinlan)
- Add Broadcom 7712 DT description and driver support (Jim Quinlan)
- Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings for
maintainability (Bjorn Helgaas)
Freescale i.MX6 PCIe controller driver:
- Add imx6q-pcie 'dbi2' and 'atu' reg-names for i.MX8M Endpoints
(Richard Zhu)
- Fix a code restructuring error that caused i.MX8MM and i.MX8MP
Endpoints to fail to establish link (Richard Zhu)
- Fix i.MX8MP Endpoint occasional failure to trigger MSI by enforcing
outbound alignment requirement (Richard Zhu)
- Call phy_power_off() in the .probe() error path (Frank Li)
- Rename internal names from imx6_* to imx_* since i.MX7/8/9 are also
supported (Frank Li)
- Manage Refclk by using SoC-specific callbacks instead of switch
statements (Frank Li)
- Manage core reset by using SoC-specific callbacks instead of switch
statements (Frank Li)
- Expand comments for erratum ERR010728 workaround (Frank Li)
- Use generic PHY APIs to configure mode, speed, and submode, which
is harmless for devices that implement their own internal PHY
management and don't set the generic imx_pcie->phy (Frank Li)
- Add i.MX8Q (i.MX8QM, i.MX8QXP, and i.MX8DXL) DT binding and driver
Root Complex support (Richard Zhu)
Freescale Layerscape PCIe controller driver:
- Replace layerscape-pcie DT binding compatible fsl,lx2160a-pcie with
fsl,lx2160ar2-pcie (Frank Li)
- Add layerscape-pcie DT binding deprecated 'num-viewport' property
to address a DT checker warning (Frank Li)
- Change layerscape-pcie DT binding 'fsl,pcie-scfg' to phandle-array
(Frank Li)
Loongson PCIe controller driver:
- Increase max PCI hosts to 8 for Loongson-3C6000 and newer chipsets
(Huacai Chen)
Marvell Aardvark PCIe controller driver:
- Fix issue with emulating Configuration RRS for two-byte reads of
Vendor ID; previously it only worked for four-byte reads (Bjorn
Helgaas)
MediaTek PCIe Gen3 controller driver:
- Add per-SoC struct mtk_gen3_pcie_pdata to support multiple SoC
types (Lorenzo Bianconi)
- Use reset_bulk APIs to manage PHY reset lines (Lorenzo Bianconi)
- Add DT and driver support for Airoha EN7581 PCIe controller
(Lorenzo Bianconi)
Qualcomm PCIe controller driver:
- Update qcom,pcie-sc7280 DT binding with eight interrupts (Rayyan
Ansari)
- Add back DT 'vddpe-3v3-supply', which was incorrectly removed
earlier (Johan Hovold)
- Drop endpoint redundant masking of global IRQ events (Manivannan
Sadhasivam)
- Clarify unknown global IRQ message and only log it once to avoid a
flood (Manivannan Sadhasivam)
- Add 'linux,pci-domain' property to endpoint DT binding (Manivannan
Sadhasivam)
- Assign PCI domain number for endpoint controllers (Manivannan
Sadhasivam)
- Add 'qcom_pcie_ep' and the PCI domain number to IRQ names for
endpoint controller (Manivannan Sadhasivam)
- Add global SPI interrupt for PCIe link events to DT binding
(Manivannan Sadhasivam)
- Add global RC interrupt handler to handle 'Link up' events and
automatically enumerate hot-added devices (Manivannan Sadhasivam)
- Avoid mirroring of DBI and iATU register space so it doesn't
overlap BAR MMIO space (Prudhvi Yarlagadda)
- Enable controller resources like PHY only after PERST# is
deasserted to partially avoid the problem that the endpoint SoC
crashes when accessing things when Refclk is absent (Manivannan
Sadhasivam)
- Add 16.0 GT/s equalization and RX lane margining settings (Shashank
Babu Chinta Venkata)
- Pass domain number to pci_bus_release_domain_nr() explicitly to
avoid a NULL pointer dereference (Manivannan Sadhasivam)
Renesas R-Car PCIe controller driver:
- Make the read-only const array 'check_addr' static (Colin Ian King)
- Add R-Car V4M (R8A779H0) PCIe host and endpoint to DT binding
(Yoshihiro Shimoda)
TI DRA7xx PCIe controller driver:
- Request IRQF_ONESHOT for 'dra7xx-pcie-main' IRQ since the primary
handler is NULL (Siddharth Vadapalli)
- Handle IRQ request errors during root port and endpoint probe
(Siddharth Vadapalli)
TI J721E PCIe driver:
- Add DT 'ti,syscon-acspcie-proxy-ctrl' and driver support to enable
the ACSPCIE module to drive Refclk for the Endpoint (Siddharth
Vadapalli)
- Extract the cadence link setup from cdns_pcie_host_setup() so link
setup can be done separately during resume (Thomas Richard)
- Add T_PERST_CLK_US definition for the mandatory delay between
Refclk becoming stable and PERST# being deasserted (Thomas Richard)
- Add j721e suspend and resume support (Théo Lebrun)
TI Keystone PCIe controller driver:
- Fix NULL pointer checking when applying MRRS limitation quirk for
AM65x SR 1.0 Errata #i2037 (Dan Carpenter)
Xilinx NWL PCIe controller driver:
- Fix off-by-one error in INTx IRQ handler that caused INTx
interrupts to be lost or delivered as the wrong interrupt (Sean
Anderson)
- Rate-limit misc interrupt messages (Sean Anderson)
- Turn off the clock on probe failure and device removal (Sean
Anderson)
- Add DT binding and driver support for enabling/disabling PHYs (Sean
Anderson)
- Add PCIe phy bindings for the ZCU102 (Sean Anderson)
Xilinx XDMA PCIe controller driver:
- Add support for Xilinx QDMA Soft IP PCIe Root Port Bridge to DT
binding and xilinx-dma-pl driver (Thippeswamy Havalige)
Miscellaneous:
- Fix buffer overflow in kirin_pcie_parse_port() (Alexandra Diupina)
- Fix minor kerneldoc issues and typos (Bjorn Helgaas)
- Use PCI_DEVID() macro in aer_inject() instead of open-coding it
(Jinjie Ruan)
- Check pcie_find_root_port() return in x86 fixups to avoid NULL
pointer dereferences (Samasth Norway Ananda)
- Make pci_bus_type constant (Kunwu Chan)
- Remove unused declarations of __pci_pme_wakeup() and
pci_vpd_release() (Yue Haibing)
- Remove any leftover .*.cmd files with make clean (zhang jiao)
- Remove unused BILLION macro (zhang jiao)"
* tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (132 commits)
PCI: Fix typos
dt-bindings: PCI: qcom: Allow 'vddpe-3v3-supply' again
tools: PCI: Remove unused BILLION macro
tools: PCI: Remove .*.cmd files with make clean
PCI: Pass domain number to pci_bus_release_domain_nr() explicitly
PCI: dra7xx: Fix error handling when IRQ request fails in probe
PCI: dra7xx: Fix threaded IRQ request for "dra7xx-pcie-main" IRQ
PCI: qcom: Add RX lane margining settings for 16.0 GT/s
PCI: qcom: Add equalization settings for 16.0 GT/s
PCI: dwc: Always cache the maximum link speed value in dw_pcie::max_link_speed
PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed'
PCI: qcom-ep: Enable controller resources like PHY only after refclk is available
PCI: Mark Creative Labs EMU20k2 INTx masking as broken
dt-bindings: PCI: imx6q-pcie: Add reg-name "dbi2" and "atu" for i.MX8M PCIe Endpoint
dt-bindings: PCI: altera: msi: Convert to YAML
PCI: imx6: Add i.MX8Q PCIe Root Complex (RC) support
PCI: Rename CRS Completion Status to RRS
PCI: aardvark: Correct Configuration RRS checking
PCI: Wait for device readiness with Configuration RRS
PCI: brcmstb: Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings
...
|
|
This section answers a new FAQ entry:
9. How does LOCALIO make certain that object lifetimes are managed
properly given NFSD and NFS operate in different contexts?
See the detailed "NFS Client and Server Interlock" section below.
The first half of the section details NeilBrown's elegant design
for LOCALIO's nfs_uuid_t based interlock and is heavily based on
Neil's "net namespace refcounting" description here:
https://marc.info/?l=linux-nfs&m=172498546024767&w=2
The second half of the section details the per-cpu-refcount introduced
to ensure NFSD's nfsd_serv isn't destroyed while in use by a LOCALIO
client.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Add a FAQ section to give answers to questions that have been raised
during review of the localio feature.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Co-developed-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
This document gives an overview of the LOCALIO auxiliary RPC protocol
added to the Linux NFS client and server to allow them to reliably
handshake to determine if they are on the same host.
Once an NFS client and server handshake as "local", the client will
bypass the network RPC protocol for read, write and commit operations.
Due to this XDR and RPC bypass, these operations will operate faster.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
The LOCALIO auxiliary RPC protocol consists of a single "UUID_IS_LOCAL"
RPC method that allows the Linux NFS client to verify the local Linux
NFS server can see the nonce (single-use UUID) the client generated and
made available in nfs_common for subsequent lookup and verification
by the NFS server. If matched, the NFS server populates members in the
nfs_uuid_t struct. The NFS client then transfers these nfs_uuid_t
struct member pointers to the nfs_client struct and cleans up the
nfs_uuid_t struct. See: fs/nfs/localio.c:nfs_local_probe()
This protocol isn't part of an IETF standard, nor does it need to be
considering it is Linux-to-Linux auxiliary RPC protocol that amounts
to an implementation detail.
Localio is only supported when UNIX-style authentication (AUTH_UNIX, aka
AUTH_SYS) is used (enforced by fs/nfs/localio.c:nfs_local_probe()).
The UUID_IS_LOCAL method encodes the client generated uuid_t in terms of
the fixed UUID_SIZE (16 bytes). The fixed size opaque encode and decode
XDR methods are used instead of the less efficient variable sized
methods.
Having a nonce (single-use uuid) is better than using the same uuid
for the life of the server, and sending it proactively by client
rather than reactively by the server is also safer.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Co-developed-by: NeilBrown <neilb@suse.de>
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
For localio access, don't call filesystem read() and write() routines
directly. This solves two problems:
1) localio writes need to use a normal (non-memreclaim) unbound
workqueue. This avoids imposing new requirements on how underlying
filesystems process frontend IO, which would cause a large amount
of work to update all filesystems. Without this change, when XFS
starts getting low on space, XFS flushes work on a non-memreclaim
work queue, which causes a priority inversion problem:
00573 workqueue: WQ_MEM_RECLAIM writeback:wb_workfn is flushing !WQ_MEM_RECLAIM xfs-sync/vdc:xfs_flush_inodes_worker
00573 WARNING: CPU: 6 PID: 8525 at kernel/workqueue.c:3706 check_flush_dependency+0x2a4/0x328
00573 Modules linked in:
00573 CPU: 6 PID: 8525 Comm: kworker/u71:5 Not tainted 6.10.0-rc3-ktest-00032-g2b0a133403ab #18502
00573 Hardware name: linux,dummy-virt (DT)
00573 Workqueue: writeback wb_workfn (flush-0:33)
00573 pstate: 400010c5 (nZcv daIF -PAN -UAO -TCO -DIT +SSBS BTYPE=--)
00573 pc : check_flush_dependency+0x2a4/0x328
00573 lr : check_flush_dependency+0x2a4/0x328
00573 sp : ffff0000c5f06bb0
00573 x29: ffff0000c5f06bb0 x28: ffff0000c998a908 x27: 1fffe00019331521
00573 x26: ffff0000d0620900 x25: ffff0000c5f06ca0 x24: ffff8000828848c0
00573 x23: 1fffe00018be0d8e x22: ffff0000c1210000 x21: ffff0000c75fde00
00573 x20: ffff800080bfd258 x19: ffff0000cad63400 x18: ffff0000cd3a4810
00573 x17: 0000000000000000 x16: 0000000000000000 x15: ffff800080508d98
00573 x14: 0000000000000000 x13: 204d49414c434552 x12: 1fffe0001b6eeab2
00573 x11: ffff60001b6eeab2 x10: dfff800000000000 x9 : ffff60001b6eeab3
00573 x8 : 0000000000000001 x7 : 00009fffe491154e x6 : ffff0000db775593
00573 x5 : ffff0000db775590 x4 : ffff0000db775590 x3 : 0000000000000000
00573 x2 : 0000000000000027 x1 : ffff600018be0d62 x0 : dfff800000000000
00573 Call trace:
00573 check_flush_dependency+0x2a4/0x328
00573 __flush_work+0x184/0x5c8
00573 flush_work+0x18/0x28
00573 xfs_flush_inodes+0x68/0x88
00573 xfs_file_buffered_write+0x128/0x6f0
00573 xfs_file_write_iter+0x358/0x448
00573 nfs_local_doio+0x854/0x1568
00573 nfs_initiate_pgio+0x214/0x418
00573 nfs_generic_pg_pgios+0x304/0x480
00573 nfs_pageio_doio+0xe8/0x240
00573 nfs_pageio_complete+0x160/0x480
00573 nfs_writepages+0x300/0x4f0
00573 do_writepages+0x12c/0x4a0
00573 __writeback_single_inode+0xd4/0xa68
00573 writeback_sb_inodes+0x470/0xcb0
00573 __writeback_inodes_wb+0xb0/0x1d0
00573 wb_writeback+0x594/0x808
00573 wb_workfn+0x5e8/0x9e0
00573 process_scheduled_works+0x53c/0xd90
00573 worker_thread+0x370/0x8c8
00573 kthread+0x258/0x2e8
00573 ret_from_fork+0x10/0x20
2) Some filesystem writeback routines can end up taking up a lot of
stack space (particularly XFS). Instead of risking running over
due to the extra overhead from the NFS stack, we should just call
these routines from a workqueue job. Since we need to do this to
address 1) above we're able to avoid possibly blowing the stack
"for free".
Use of dedicated workqueues improves performance over using the
system_unbound_wq.
Also, the creds used to open the file are used to override_creds() in
both nfs_local_call_read() and nfs_local_call_write() -- otherwise the
workqueue could have elevated capabilities (which the caller may not).
Lastly, care is taken to set PF_LOCAL_THROTTLE | PF_MEMALLOC_NOIO in
nfs_do_local_write() to avoid writeback deadlocks.
The PF_LOCAL_THROTTLE flag prevents deadlocks in balance_dirty_pages()
by causing writes to only be throttled against other writes to the
same bdi (it keeps the throttling local). Normally all writes to
bdi(s) are throttled equally (after throughput factors are allowed
for).
The PF_MEMALLOC_NOIO flag prevents the lower filesystem IO from
causing memory reclaim to re-enter filesystems or IO devices and so
prevents deadlocks from occuring where IO that cleans pages is
waiting on IO to complete.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Co-developed-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Co-developed-by: NeilBrown <neilb@suse.de>
Signed-off-by: NeilBrown <neilb@suse.de> # eliminated wait_for_completion
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
If the DS is local to this client use localio to write the data.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Try a local open of the file being written to, and if it succeeds,
then use localio to issue IO.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Add client support for bypassing NFS for localhost reads, writes, and
commits. This is only useful when the client and the server are
running on the same host.
nfs_local_probe() is stubbed out, later commits will enable client and
server handshake via a Linux-only LOCALIO auxiliary RPC protocol.
This has dynamic binding with the nfsd module (via nfs_localio module
which is part of nfs_common). LOCALIO will only work if nfsd is
already loaded.
The "localio_enabled" nfs kernel module parameter can be used to
disable and enable the ability to use LOCALIO support.
CONFIG_NFS_LOCALIO enables NFS client support for LOCALIO.
Lastly, LOCALIO uses an nfsd_file to initiate all IO. To make proper
use of nfsd_file (and nfsd's filecache) its lifetime (duration before
nfsd_file_put is called) must extend until after commit, read and
write operations. So rather than immediately drop the nfsd_file
reference in nfs_local_open_fh(), that doesn't happen until
nfs_local_pgio_release() for read/write and not until
nfs_local_release_commit_data() for commit. The same applies to the
reference held on nfsd's nn->nfsd_serv. Both objects' lifetimes and
associated references are managed through calls to
nfs_to->nfsd_file_put_local().
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Co-developed-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de> # nfs_open_local_fh
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
The nfsd_file will be passed, in future commits, by callers
that enable LOCALIO support (for both regular NFS and pNFS IO).
[Derived from patch authored by Weston Andros Adamson, but switched
from passing struct file to struct nfsd_file]
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
The LOCALIO auxiliary RPC protocol consists of a single "UUID_IS_LOCAL"
RPC method that allows the Linux NFS client to verify the local Linux
NFS server can see the nonce (single-use UUID) the client generated and
made available in nfs_common. The server expects this protocol to use
the same transport as NFS and NFSACL for its RPCs. This protocol
isn't part of an IETF standard, nor does it need to be considering it
is Linux-to-Linux auxiliary RPC protocol that amounts to an
implementation detail.
The UUID_IS_LOCAL method encodes the client generated uuid_t in terms of
the fixed UUID_SIZE (16 bytes). The fixed size opaque encode and decode
XDR methods are used instead of the less efficient variable sized
methods.
The RPC program number for the NFS_LOCALIO_PROGRAM is 400122 (as assigned
by IANA, see https://www.iana.org/assignments/rpc-program-numbers/ ):
Linux Kernel Organization 400122 nfslocalio
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
[neilb: factored out and simplified single localio protocol]
Co-developed-by: NeilBrown <neilb@suse.de>
Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Add server support for bypassing NFS for localhost reads, writes, and
commits. This is only useful when both the client and server are
running on the same host.
If nfsd_open_local_fh() fails then the NFS client will both retry and
fallback to normal network-based read, write and commit operations if
localio is no longer supported.
Care is taken to ensure the same NFS security mechanisms are used
(authentication, etc) regardless of whether localio or regular NFS
access is used. The auth_domain established as part of the traditional
NFS client access to the NFS server is also used for localio. Store
auth_domain for localio in nfsd_uuid_t and transfer it to the client
if it is local to the server.
Relative to containers, localio gives the client access to the network
namespace the server has. This is required to allow the client to
access the server's per-namespace nfsd_net struct.
This commit also introduces the use of NFSD's percpu_ref to interlock
nfsd_destroy_serv and nfsd_open_local_fh, to ensure nn->nfsd_serv is
not destroyed while in use by nfsd_open_local_fh and other LOCALIO
client code.
CONFIG_NFS_LOCALIO enables NFS server support for LOCALIO.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Co-developed-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Co-developed-by: NeilBrown <neilb@suse.de>
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
The next commit will introduce nfsd_open_local_fh() which returns an
nfsd_file structure. This commit exposes LOCALIO's required NFSD
symbols to the NFS client:
- Make nfsd_open_local_fh() symbol and other required NFSD symbols
available to NFS in a global 'nfs_to' nfsd_localio_operations
struct (global access suggested by Trond, nfsd_localio_operations
suggested by NeilBrown). The next commit will also introduce
nfsd_localio_ops_init() that init_nfsd() will call to initialize
'nfs_to'.
- Introduce nfsd_file_file() that provides access to nfsd_file's
backing file. Keeps nfsd_file structure opaque to NFS client (as
suggested by Jeff Layton).
- Introduce nfsd_file_put_local() that will put the reference to the
nfsd_file's associated nn->nfsd_serv and then put the reference to
the nfsd_file (as suggested by NeilBrown).
Suggested-by: Trond Myklebust <trond.myklebust@hammerspace.com> # nfs_to
Suggested-by: NeilBrown <neilb@suse.de> # nfsd_localio_operations
Suggested-by: Jeff Layton <jlayton@kernel.org> # nfsd_file_file
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
fs/nfs_common/nfslocalio.c provides interfaces that enable an NFS
client to generate a nonce (single-use UUID) and associated nfs_uuid_t
struct, register it with nfs_common for subsequent lookup and
verification by the NFS server and if matched the NFS server populates
members in the nfs_uuid_t struct.
nfs_common's nfs_uuids list is the basis for localio enablement, as
such it has members that point to nfsd memory for direct use by the
client (e.g. 'net' is the server's network namespace, through it the
client can access nn->nfsd_serv).
This commit also provides the base nfs_uuid_t interfaces to allow
proper net namespace refcounting for the LOCALIO use case.
CONFIG_NFS_LOCALIO controls the nfs_common, NFS server and NFS client
enablement for LOCALIO. If both NFS_FS=m and NFSD=m then
NFS_COMMON_LOCALIO_SUPPORT=m and nfs_localio.ko is built (and provides
nfs_common's LOCALIO support).
# lsmod | grep nfs_localio
nfs_localio 12288 2 nfsd,nfs
sunrpc 745472 35 nfs_localio,nfsd,auth_rpcgss,lockd,nfsv3,nfs
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Co-developed-by: NeilBrown <neilb@suse.de>
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
A service created with svc_create_pooled() can be given a linked list of
programs and all of these will be served.
Using a linked list makes it cumbersome when there are several programs
that can be optionally selected with CONFIG settings.
After this patch is applied, API consumers must use only
svc_create_pooled() when creating an RPC service that listens for more
than one RPC program.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Add new funtion svcauth_map_clnt_to_svc_cred_local which maps a
generic cred to a svc_cred suitable for use in nfsd.
This is needed by the localio code to map nfs client creds to nfs
server credentials.
Following from net/sunrpc/auth_unix.c:unx_marshal() it is clear that
->fsuid and ->fsgid must be used (rather than ->uid and ->gid). In
addition, these uid and gid must be translated with from_kuid_munged()
so local client uses correct uid and gid when acting as local server.
Jeff Layton noted:
This is where the magic happens. Since we're working in
kuid_t/kgid_t, we don't need to worry about further idmapping.
Suggested-by: NeilBrown <neilb@suse.de> # to approximate unx_marshal()
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Co-developed-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Remove BUG_ON if p_arglen=0 to allow RPC with void arg.
Remove BUG_ON if p_replen=0 to allow RPC with void return.
The former was needed for the first revision of the LOCALIO protocol
which had an RPC that took a void arg:
/* raw RFC 9562 UUID */
typedef u8 uuid_t<UUID_SIZE>;
program NFS_LOCALIO_PROGRAM {
version LOCALIO_V1 {
void
NULL(void) = 0;
uuid_t
GETUUID(void) = 1;
} = 1;
} = 400122;
The latter is needed for the final revision of the LOCALIO protocol
which has a UUID_IS_LOCAL RPC which returns a void:
/* raw RFC 9562 UUID */
typedef u8 uuid_t<UUID_SIZE>;
program NFS_LOCALIO_PROGRAM {
version LOCALIO_V1 {
void
NULL(void) = 0;
void
UUID_IS_LOCAL(uuid_t) = 1;
} = 1;
} = 400122;
There is really no value in triggering a BUG_ON in response to either
of these previously unsupported conditions.
NeilBrown would like the entire 'if (proc->p_proc != 0)' branch
removed (not just the one BUG_ON that must be removed for LOCALIO's
immediate needs of returning void).
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Introduce nfsd_serv_try_get and nfsd_serv_put and update the nfsd code
to prevent nfsd_destroy_serv from destroying nn->nfsd_serv until any
caller of nfsd_serv_try_get releases their reference using nfsd_serv_put.
A percpu_ref is used to implement the interlock between
nfsd_destroy_serv and any caller of nfsd_serv_try_get.
This interlock is needed to properly wait for the completion of client
initiated localio calls to nfsd (that are _not_ in the context of nfsd).
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
nfsd_file_acquire_local() can be used to look up a file by filehandle
without having a struct svc_rqst. This can be used by NFS LOCALIO to
allow the NFS client to bypass the NFS protocol to directly access a
file provided by the NFS server which is running in the same kernel.
In nfsd_file_do_acquire() care is taken to always use fh_verify() if
rqstp is not NULL (as is the case for non-LOCALIO callers). Otherwise
the non-LOCALIO callers will not supply the correct and required
arguments to __fh_verify (e.g. gssclient isn't passed).
Introduce fh_verify_local() wrapper around __fh_verify to make it
clear that LOCALIO is intended caller.
Also, use GC for nfsd_file returned by nfsd_file_acquire_local. GC
offers performance improvements if/when a file is reopened before
launderette cleans it from the filecache's LRU.
Suggested-by: Jeff Layton <jlayton@kernel.org> # use filecache's GC
Signed-off-by: NeilBrown <neilb@suse.de>
Co-developed-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
__fh_verify() offers an interface like fh_verify() but doesn't require
a struct svc_rqst *, instead it also takes the specific parts as
explicit required arguments. So it is safe to call __fh_verify() with
a NULL rqstp, but the net, cred, and client args must not be NULL.
__fh_verify() does not use SVC_NET(), nor does the functions it calls.
Rather than using rqstp->rq_client pass the client and gssclient
explicitly to __fh_verify and then to nfsd_set_fh_dentry().
Lastly, it should be noted that the previous commit prepared for 4
associated tracepoints to only be used if rqstp is not NULL (this is a
stop-gap that should be properly fixed so localio also benefits from
the utility these tracepoints provide when debugging fh_verify
issues).
Signed-off-by: NeilBrown <neilb@suse.de>
Co-developed-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
LOCALIO will be able to call fh_verify() with a NULL rqstp. In this
case, the existing trace points need to be skipped because they
want to dereference the address fields in the passed-in rqstp.
Temporarily make these trace points conditional to avoid a seg
fault in this case. Putting the "rqstp != NULL" check in the trace
points themselves makes the check more efficient.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Acked-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Currently, fh_verify() makes some daring assumptions about which
version of file handle the caller wants, based on the things it can
find in the passed-in rqstp. The about-to-be-introduced LOCALIO use
case sometimes has no svc_rqst context, so this logic won't work in
that case.
Instead, examine the passed-in file handle. It's .max_size field
should carry information to allow nfsd_set_fh_dentry() to initialize
the file handle appropriately.
The file handle used by lockd and the one created by write_filehandle
never need any of the version-specific fields (which affect things
like write and getattr requests and pre/post attributes).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
There are several places where __fh_verify unconditionally dereferences
rqstp to check that the connection is suitably secure. They look at
rqstp->rq_xprt which is not meaningful in the target use case of
"localio" NFS in which the client talks directly to the local server.
Prepare these to always succeed when rqstp is NULL.
Signed-off-by: NeilBrown <neilb@suse.de>
Co-developed-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
LOCALIO-initiated open operations are not running in an nfsd thread
and thus do not have an associated svc_rqst context.
Signed-off-by: NeilBrown <neilb@suse.de>
Co-developed-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Eliminates duplicate functions in various files to allow for
additional callers.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Common nfs4_stat_to_errno() is used by fs/nfs/nfs4xdr.c and will be
used by fs/nfs/localio.c
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Common nfs_stat_to_errno() is used by both fs/nfs/nfs2xdr.c and
fs/nfs/nfs3xdr.c
Will also be used by fs/nfsd/localio.c
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
There are some applications that write to predefined non-overlapping
file offsets from multiple clients and therefore don't need to rely on
file locking. However, if these applications want non-aligned offsets
and sizes they need to either use locks or risk data corruption, as the
NFS client defaults to extending writes to whole pages.
This commit adds a new mount option `noalignwrite`, which allows to turn
that off and avoid the need of locking, as long as these applications
don't overlap on offsets.
Signed-off-by: Dan Aloni <dan.aloni@vastdata.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
The comment for nfs_get_root() needs to be updated as it would also be
used by NFS4 as follows:
@x[
nfs_get_root+1
nfs_get_tree_common+1819
nfs_get_tree+2594
vfs_get_tree+73
fc_mount+23
do_nfs4_mount+498
nfs4_try_get_tree+134
nfs_get_tree+2562
vfs_get_tree+73
path_mount+2776
do_mount+226
__se_sys_mount+343
__x64_sys_mount+106
do_syscall_64+69
entry_SYSCALL_64_after_hwframe+97
, mount.nfs4]: 1
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
According to draft-ietf-nfsv4-delstid-07:
If a server informs the client via the fattr4_open_arguments
attribute that it supports
OPEN_ARGS_SHARE_ACCESS_WANT_DELEG_TIMESTAMPS and it returns a valid
delegation stateid for an OPEN operation which sets the
OPEN4_SHARE_ACCESS_WANT_DELEG_TIMESTAMPS flag, then it MUST query the
client via a CB_GETATTR for the fattr4_time_deleg_access (see
Section 5.2) attribute and fattr4_time_deleg_modify attribute (see
Section 5.2).
Thus, we should look that the server supports proxying of times via
OPEN4_SHARE_ACCESS_WANT_DELEG_TIMESTAMPS.
We want to be extra pedantic and continue to check that FATTR4_TIME_DELEG_ACCESS
and FATTR4_TIME_DELEG_MODIFY are set. The server needs to expose both for the
client to correctly detect "Proxying of Times" support.
Signed-off-by: Roi Azarzar <roi.azarzar@vastdata.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Fixes: dcb3c20f7419 ("NFSv4: Add a capability for delegated attributes")
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
If the server is down when the client is trying to mount, so that the
calls to exchange_id or create_session fail, then we should allow the
mount system call to fail rather than hang and block other mount/umount
calls.
Reported-by: Oleksandr Tymoshenko <ovt@google.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
folio_attach_private
This patch is inspired by a code review of fs codes which aims at
folio's extra refcnt that could introduce unwanted behavious when
judging refcnt, such as[1].That is, the folio passed to
mapping_evict_folio carries the refcnts from find_lock_entries,
page_cache, corresponding to PTEs and folio's private if has. However,
current code doesn't take the refcnt for folio's private which could
have mapping_evict_folio miss the one to only PTE and lead to
call filemap_release_folio wrongly.
[1]
long mapping_evict_folio(struct address_space *mapping, struct folio *folio)
{
...
//current code will misjudge here if there is one pte on the folio which
is be deemed as the one as folio's private
if (folio_ref_count(folio) >
folio_nr_pages(folio) + folio_has_private(folio) + 1)
return 0;
if (!filemap_release_folio(folio, 0))
return 0;
return remove_mapping(mapping, folio);
}
Signed-off-by: Zhaoyang Huang <zhaoyang.huang@unisoc.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
The nfs_read_prepare() have been removed since
commit a4cdda59111f ("NFS: Create a common pgio_rpc_prepare function"),
and now it is useless, so remove it.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
list_head can be initialized automatically with LIST_HEAD()
instead of calling INIT_LIST_HEAD(). Here we can simplify
the code.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
destroy_wait doesn't store all RPC clients. There was a list named
"all_clients" above it, which got moved to struct sunrpc_net in 2012,
but the comment was never removed.
Fixes: 70abc49b4f4a ("SUNRPC: make SUNPRC clients list per network namespace context")
Signed-off-by: Siddh Raman Pant <siddh.raman.pant@oracle.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
The RPC_TASK_* constants are defined as macros, which means that most
kernel builds will not contain their definitions in the debuginfo.
However, it's quite useful for debuggers to be able to view the task
state constant and interpret it correctly. Conversion to an enum will
ensure the constants are present in debuginfo and can be interpreted by
debuggers without needing to hard-code them and track their changes.
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
