| Age | Commit message (Collapse) | Author |
|---|
|
entity (SecY)
Upon updating MAC security entity (SecY) in hw offload path, the macsec
security association (SA) initialization routine is called. In case of
extended packet number (epn) is enabled the salt and ssci attributes are
retrieved using the MACsec driver rx_sa context which is unavailable when
updating a SecY property such as encoding-sa hence the null dereference.
Fix by using the provided SA to set those attributes.
Fixes: 4411a6c0abd3 ("net/mlx5e: Support MACsec offload extended packet number (EPN)")
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently when macsec offload is set with extended packet number (epn)
enabled, the driver wrongly deduce the short secure channel identifier
(ssci) from the salt instead of the stand alone ssci attribute as it
should, consequently creating a mismatch between the kernel and driver's
ssci values.
Fix by using the ssci value from the relevant attribute.
Fixes: 4411a6c0abd3 ("net/mlx5e: Support MACsec offload extended packet number (EPN)")
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When a capability is set via port function caps callbacks, a memcpy() is
performed in which the source and the target are the same address, e.g.:
the copy is redundant. Hence, Remove it.
Discovered by Coverity.
Fixes: 7db98396ef45 ("net/mlx5: E-Switch, Implement devlink port function cmds to control RoCE")
Fixes: e5b9642a33be ("net/mlx5: E-Switch, Implement devlink port function cmds to control migratable")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Previously, encap rules with gbp option would be offloaded by mistake but
driver does not support gbp option offload.
To fix this issue, check if the encap rule has gbp option and don't
offload the rule
Fixes: d8f9dfae49ce ("net: sched: allow flower to match vxlan options")
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
.max_adj of ptp_clock_info acts as an absolute value for the amount in ppb
that can be set for a single call of .adjfine. This means that a single
call to .getfine cannot be greater than .max_adj or less than -(.max_adj).
Provides correct value for max frequency adjustment value supported by
devices.
Fixes: 3d8c38af1493 ("net/mlx5e: Add PTP Hardware Clock (PHC) support")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When updating statistics driver queries the vport's counters. On fail,
add error path releasing the allocated buffer avoiding memory leak.
Fixes: 64b68e369649 ("net/mlx5: Refactor and expand rep vport stat group")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The offending commit removed the support for all packet rate metering.
Restore the pkt rate metering support by removing the restriction.
Fixes: 3603f26633e7 ("net/mlx5e: TC, allow meter jump control action")
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The post meter table only matches on reg_c5. As such, the inner/outer
match levels are irrelevant for the match critieria. The cited patch only
sets the outer criteria to none, thus setting the inner match level for
encapsulated packets. This caused rules with police action on tunnel
devices to not find an existing flow group for the match criteria, thus
failing to offload the rule.
Set both the inner and outer match levels to none for post_meter rules.
Fixes: 0d8c38d44f33 ("net/mlx5e: TC, init post meter rules with branching attributes")
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The current code always does the accounting using the
stats from the parent interface (linked in the rq). This
doesn't work when there are child interfaces configured.
Fix this behavior by always using the stats from the child
interface priv. This will also work for parent only
interfaces: the child (netdev) and parent netdev (rq->netdev)
will point to the same thing.
Fixes: be98737a4faa ("net/mlx5e: Use dynamic per-channel allocations in stats")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
A user is able to configure an arbitrary number of rx queues when
creating an interface via netlink. This doesn't work for child PKEY
interfaces because the child interface uses the parent receive channels.
Although the child shares the parent's receive channels, the number of
rx queues is important for the channel_stats array: the parent's rx
channel index is used to access the child's channel_stats. So the array
has to be at least as large as the parent's rx queue size for the
counting to work correctly and to prevent out of bound accesses.
This patch checks for the mentioned scenario and returns an error when
trying to create the interface. The error is propagated to the user.
Fixes: be98737a4faa ("net/mlx5e: Use dynamic per-channel allocations in stats")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
present
PKEY sub interfaces share the receive queues with the parent interface.
While setting the sub interface queue count is not supported, it is
currently possible to change the number of queues of the parent interface.
Thus we can end up with inconsistent queue sizes between the parent and its
sub interfaces.
This change disallows setting the queue count on the parent interface when
sub interfaces are present.
This is achieved by introducing an explicit reference to the parent netdev
in the mlx5i_priv of the child interface. An additional counter is also
required on the parent side to detect when sub interfaces are attached and
for proper cleanup.
The rtnl lock is taken during the ethtool op and the sub interface
ndo_init/uninit ops. There is no race here around counting the sub
interfaces, reading the sub interfaces and setting the number of
channels. The ASSERT_RTNL was added to document that.
Fixes: be98737a4faa ("net/mlx5e: Use dynamic per-channel allocations in stats")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The native NIC port net device instance is being used as Uplink
representor. While changing profiles private resources are not
available, fix features ndo does not check if the netdev is present.
Add driver protection to verify private resources are ready.
Fixes: 7a9fb35e8c3a ("net/mlx5e: Do not reload ethernet ports when changing eswitch mode")
Signed-off-by: Roy Novich <royno@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Command may fail while driver is reloading and can't accept FW commands
till command interface is reinitialized. Such command failure is being
logged to command stats. This results in NULL pointer access as command
stats structure is being freed and reallocated during mlx5 devlink
reload (see kernel log below).
Fix it by making command stats statically allocated on driver probe.
Kernel log:
[ 2394.808802] BUG: unable to handle kernel paging request at 000000000002a9c0
[ 2394.810610] PGD 0 P4D 0
[ 2394.811811] Oops: 0002 [#1] SMP NOPTI
...
[ 2394.815482] RIP: 0010:native_queued_spin_lock_slowpath+0x183/0x1d0
...
[ 2394.829505] Call Trace:
[ 2394.830667] _raw_spin_lock_irq+0x23/0x26
[ 2394.831858] cmd_status_err+0x55/0x110 [mlx5_core]
[ 2394.833020] mlx5_access_reg+0xe7/0x150 [mlx5_core]
[ 2394.834175] mlx5_query_port_ptys+0x78/0xa0 [mlx5_core]
[ 2394.835337] mlx5e_ethtool_get_link_ksettings+0x74/0x590 [mlx5_core]
[ 2394.836454] ? kmem_cache_alloc_trace+0x140/0x1c0
[ 2394.837562] __rh_call_get_link_ksettings+0x33/0x100
[ 2394.838663] ? __rtnl_unlock+0x25/0x50
[ 2394.839755] __ethtool_get_link_ksettings+0x72/0x150
[ 2394.840862] duplex_show+0x6e/0xc0
[ 2394.841963] dev_attr_show+0x1c/0x40
[ 2394.843048] sysfs_kf_seq_show+0x9b/0x100
[ 2394.844123] seq_read+0x153/0x410
[ 2394.845187] vfs_read+0x91/0x140
[ 2394.846226] ksys_read+0x4f/0xb0
[ 2394.847234] do_syscall_64+0x5b/0x1a0
[ 2394.848228] entry_SYSCALL_64_after_hwframe+0x65/0xca
Fixes: 34f46ae0d4b3 ("net/mlx5: Add command failures data to debugfs")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When offloading TC NIC rule which has mod_hdr action, the
mod_hdr actions list is freed upon mod_hdr allocation.
In the new format of handling multi table actions and CT in
particular, the mod_hdr actions list is still relevant when
setting the pre and post rules and therefore, freeing the list
may cause adding rules which don't set the FTE_ID.
Therefore, the mod_hdr actions list needs to be kept for the
pre/post flows as well and should be left for these handler to
be freed.
Fixes: 8300f225268b ("net/mlx5e: Create new flow attr for multi table actions")
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Fix attr pointer validity checks after it was already
dereferenced.
Fixes: cb0d54cbf948 ("net/mlx5e: Fix wrong source vport matching on tunnel rule")
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
If the kernel configuration asks the compiler to check frame limit of 1K,
dr_rule_create_rule_nic exceed this limit:
"stack frame size (1184) exceeds limit (1024)"
Fixing this issue by checking configured frame limit and using the
optimization STE array only for cases with the usual 2K (or larger)
stack size warning.
Fixes: b9b81e1e9382 ("net/mlx5: DR, For short chains of STEs, avoid allocating ste_arr dynamically")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
|
|
This reverts commit 42666b2c452ce87894786aae05e3fad3cfc6cb59.
This chip version seems to be very rare, but it exits in consumer
devices, see linked report.
Link: https://stackoverflow.com/questions/75049473/cant-setup-a-wired-network-in-archlinux-fresh-install
Fixes: 42666b2c452c ("r8169: disable detection of chip version 36")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/42e9674c-d5d0-a65a-f578-e5c74f244739@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use NULL for NULL pointer to fix the following sparse warning:
drivers/cpufreq/armada-37xx-cpufreq.c:448:32: sparse: warning: Using plain integer as NULL pointer
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The 'TCA_MPLS_LABEL' attribute is of 'NLA_U32' type, but has a
validation type of 'NLA_VALIDATE_FUNCTION'. This is an invalid
combination according to the comment above 'struct nla_policy':
"
Meaning of `validate' field, use via NLA_POLICY_VALIDATE_FN:
NLA_BINARY Validation function called for the attribute.
All other Unused - but note that it's a union
"
This can trigger the warning [1] in nla_get_range_unsigned() when
validation of the attribute fails. Despite being of 'NLA_U32' type, the
associated 'min'/'max' fields in the policy are negative as they are
aliased by the 'validate' field.
Fix by changing the attribute type to 'NLA_BINARY' which is consistent
with the above comment and all other users of NLA_POLICY_VALIDATE_FN().
As a result, move the length validation to the validation function.
No regressions in MPLS tests:
# ./tdc.py -f tc-tests/actions/mpls.json
[...]
# echo $?
0
[1]
WARNING: CPU: 0 PID: 17743 at lib/nlattr.c:118
nla_get_range_unsigned+0x1d8/0x1e0 lib/nlattr.c:117
Modules linked in:
CPU: 0 PID: 17743 Comm: syz-executor.0 Not tainted 6.1.0-rc8 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.13.0-48-gd9c812dda519-prebuilt.qemu.org 04/01/2014
RIP: 0010:nla_get_range_unsigned+0x1d8/0x1e0 lib/nlattr.c:117
[...]
Call Trace:
<TASK>
__netlink_policy_dump_write_attr+0x23d/0x990 net/netlink/policy.c:310
netlink_policy_dump_write_attr+0x22/0x30 net/netlink/policy.c:411
netlink_ack_tlv_fill net/netlink/af_netlink.c:2454 [inline]
netlink_ack+0x546/0x760 net/netlink/af_netlink.c:2506
netlink_rcv_skb+0x1b7/0x240 net/netlink/af_netlink.c:2546
rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:6109
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x5e9/0x6b0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x739/0x860 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg net/socket.c:734 [inline]
____sys_sendmsg+0x38f/0x500 net/socket.c:2482
___sys_sendmsg net/socket.c:2536 [inline]
__sys_sendmsg+0x197/0x230 net/socket.c:2565
__do_sys_sendmsg net/socket.c:2574 [inline]
__se_sys_sendmsg net/socket.c:2572 [inline]
__x64_sys_sendmsg+0x42/0x50 net/socket.c:2572
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Link: https://lore.kernel.org/netdev/CAO4mrfdmjvRUNbDyP0R03_DrD_eFCLCguz6OxZ2TYRSv0K9gxA@mail.gmail.com/
Fixes: 2a2ea50870ba ("net: sched: add mpls manipulation actions to TC")
Reported-by: Wei Chen <harperchen1110@gmail.com>
Tested-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20230107171004.608436-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
User resource lookups used rcu to avoid two extra atomics. Unfortunately
the rcu paths were buggy and it was easy to make the driver crash by
submitting command buffers from two different threads. Because the
lookups never show up in performance profiles replace them with a
regular spin lock which fixes the races in accesses to those shared
resources.
Fixes kernel oops'es in IGT's vmwgfx execution_buffer stress test and
seen crashes with apps using shared resources.
Fixes: e14c02e6b699 ("drm/vmwgfx: Look up objects without taking a reference")
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221207172907.959037-1-zack@kde.org
|
|
Userspace can guess the handle value and try to race GEM object creation
with handle close, resulting in a use-after-free if we dereference the
object after dropping the handle's reference. For that reason, dropping
the handle's reference must be done *after* we are done dereferencing
the object.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Fixes: 62fb7a5e1096 ("virtio-gpu: add 3d/virgl support")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221216233355.542197-2-robdclark@gmail.com
|
|
We had already disabled this warning for gcc-12 due to bugs in the value
range analysis, but it turns out we end up having some similar problems
with gcc-11.3 too, so let's disable it there too.
Older gcc versions end up being increasingly less relevant, and
hopefully clang and newer version of gcc (ie gcc-13) end up working
reliably enough that we still get the build coverage even when we
disable this for some versions.
Link: https://lore.kernel.org/all/20221227002941.GA2691687@roeck-us.net/
Link: https://lore.kernel.org/all/D8BDBF66-E44C-45D4-9758-BAAA4F0C1998@kernel.org/
Cc: Kees Cook <kees@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If we don't, then we may lose access to it completely, leading to a
request leak. This will eventually stall the ring exit process as
well.
Cc: stable@vger.kernel.org
Fixes: 49f1c68e048f ("io_uring: optimise submission side poll_refs")
Reported-and-tested-by: syzbot+6c95df01470a47fc3af4@syzkaller.appspotmail.com
Link: https://lore.kernel.org/io-uring/0000000000009f829805f1ce87b2@google.com/
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add the check for the return value of kzalloc in order to avoid
NULL pointer dereference.
Moreover, use the goto-label to share the clean code.
Fixes: d6b98c8d242a ("ice: add write functionality for GNSS TTY")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The ice_gnss_tty_write() return directly if the write_buf alloc failed,
leaking the cmd_buf.
Fix by free cmd_buf if write_buf alloc failed.
Fixes: d6b98c8d242a ("ice: add write functionality for GNSS TTY")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Fixed bug on error when unloading amdgpu.
The error message is as follows:
[ 377.706202] kernel BUG at drivers/gpu/drm/drm_buddy.c:278!
[ 377.706215] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 377.706222] CPU: 4 PID: 8610 Comm: modprobe Tainted: G IOE 6.0.0-thomas #1
[ 377.706231] Hardware name: ASUS System Product Name/PRIME Z390-A, BIOS 2004 11/02/2021
[ 377.706238] RIP: 0010:drm_buddy_free_block+0x26/0x30 [drm_buddy]
[ 377.706264] Code: 00 00 00 90 0f 1f 44 00 00 48 8b 0e 89 c8 25 00 0c 00 00 3d 00 04 00 00 75 10 48 8b 47 18 48 d3 e0 48 01 47 28 e9 fa fe ff ff <0f> 0b 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 54 55 48 89 f5 53
[ 377.706282] RSP: 0018:ffffad2dc4683cb8 EFLAGS: 00010287
[ 377.706289] RAX: 0000000000000000 RBX: ffff8b1743bd5138 RCX: 0000000000000000
[ 377.706297] RDX: ffff8b1743bd5160 RSI: ffff8b1743bd5c78 RDI: ffff8b16d1b25f70
[ 377.706304] RBP: ffff8b1743bd59e0 R08: 0000000000000001 R09: 0000000000000001
[ 377.706311] R10: ffff8b16c8572400 R11: ffffad2dc4683cf0 R12: ffff8b16d1b25f70
[ 377.706318] R13: ffff8b16d1b25fd0 R14: ffff8b1743bd59c0 R15: ffff8b16d1b25f70
[ 377.706325] FS: 00007fec56c72c40(0000) GS:ffff8b1836500000(0000) knlGS:0000000000000000
[ 377.706334] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 377.706340] CR2: 00007f9b88c1ba50 CR3: 0000000110450004 CR4: 00000000003706e0
[ 377.706347] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 377.706354] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 377.706361] Call Trace:
[ 377.706365] <TASK>
[ 377.706369] drm_buddy_free_list+0x2a/0x60 [drm_buddy]
[ 377.706376] amdgpu_vram_mgr_fini+0xea/0x180 [amdgpu]
[ 377.706572] amdgpu_ttm_fini+0x12e/0x1a0 [amdgpu]
[ 377.706650] amdgpu_bo_fini+0x22/0x90 [amdgpu]
[ 377.706727] gmc_v11_0_sw_fini+0x26/0x30 [amdgpu]
[ 377.706821] amdgpu_device_fini_sw+0xa1/0x3c0 [amdgpu]
[ 377.706897] amdgpu_driver_release_kms+0x12/0x30 [amdgpu]
[ 377.706975] drm_dev_release+0x20/0x40 [drm]
[ 377.707006] release_nodes+0x35/0xb0
[ 377.707014] devres_release_all+0x8b/0xc0
[ 377.707020] device_unbind_cleanup+0xe/0x70
[ 377.707027] device_release_driver_internal+0xee/0x160
[ 377.707033] driver_detach+0x44/0x90
[ 377.707039] bus_remove_driver+0x55/0xe0
[ 377.707045] pci_unregister_driver+0x3b/0x90
[ 377.707052] amdgpu_exit+0x11/0x6c [amdgpu]
[ 377.707194] __x64_sys_delete_module+0x142/0x2b0
[ 377.707201] ? fpregs_assert_state_consistent+0x22/0x50
[ 377.707208] ? exit_to_user_mode_prepare+0x3e/0x190
[ 377.707215] do_syscall_64+0x38/0x90
[ 377.707221] entry_SYSCALL_64_after_hwframe+0x63/0xcd
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Removing the firmware framebuffer from the driver means that even
if the driver doesn't support the IP blocks in a GPU it will no
longer be functional after the driver fails to initialize.
This change will ensure that unsupported IP blocks at least cause
the driver to work with the EFI framebuffer.
Cc: stable@vger.kernel.org
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix potential NULL dereference, in the case when "man", the resource manager
might be NULL, when/if we print debug information.
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: AMD Graphics <amd-gfx@lists.freedesktop.org>
Cc: Dan Carpenter <error27@gmail.com>
Cc: kernel test robot <lkp@intel.com>
Fixes: 7554886daa31ea ("drm/amdgpu: Fix size validation for non-exclusive domains (v4)")
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In cifs_open_file(), @buf must hold a pointer to a cifs_open_info_data
structure which is passed by cifs_nt_open(), so assigning @buf
directly to @fi was obviously wrong.
Fix this by passing a valid FILE_ALL_INFO structure to SMBLegacyOpen()
and CIFS_open(), and then copy the set structure to the corresponding
cifs_open_info_data::fi field with move_cifs_info_to_smb2() helper.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216889
Fixes: 76894f3e2f71 ("cifs: improve symlink handling for smb2+")
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
We missed to set file info when CIFSSMBQPathInfo() returned 0, thus
leaving cifs_open_info_data::fi unset.
Fix this by setting cifs_open_info_data::fi when either
CIFSSMBQPathInfo() or SMBQueryInformation() succeed.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216881
Fixes: 76894f3e2f71 ("cifs: improve symlink handling for smb2+")
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When RISCV port was imported in 5.2, the O_* macros were taken with
their octal value and written as-is in hex, resulting in the getdents64()
to fail in nolibc-test.
Fixes: 582e84f7b779 ("tool headers nolibc: add RISCV support") #5.2
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
When building on ARM in thumb mode with gcc-11.3 at -O2 or -O3,
nolibc-test segfaults during the select() tests. It turns out that at
this level, gcc recognizes an opportunity for using memset() to zero
the fd_set, but it miscompiles it because it also recognizes a memset
pattern as well, and decides to call memset() from the memset() code:
000122bc <memset>:
122bc: b510 push {r4, lr}
122be: 0004 movs r4, r0
122c0: 2a00 cmp r2, #0
122c2: d003 beq.n 122cc <memset+0x10>
122c4: 23ff movs r3, #255 ; 0xff
122c6: 4019 ands r1, r3
122c8: f7ff fff8 bl 122bc <memset>
122cc: 0020 movs r0, r4
122ce: bd10 pop {r4, pc}
Simply placing an empty asm() statement inside the loop suffices to
avoid this.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
After the nolibc includes were split to facilitate portability from
standard libcs, programs that include only what they need may miss
some symbols which are needed by libgcc. This is the case for raise()
which is needed by the divide by zero code in some architectures for
example.
Regardless, being able to include only the apparently needed files is
convenient.
Instead of trying to move all exported definitions to a single file,
since this can change over time, this patch takes another approach
consisting in including the nolibc header at the end of all standard
include files. This way their types and functions are already known
at the moment of inclusion, and including any single one of them is
sufficient to bring all the required ones.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Depending on the compiler used and the optimization options, the sbrk()
test was crashing, both on real hardware (mips-24kc) and in qemu. One
such example is kernel.org toolchain in version 11.3 optimizing at -Os.
Inspecting the sys_brk() call shows the following code:
0040047c <sys_brk>:
40047c: 24020fcd li v0,4045
400480: 27bdffe0 addiu sp,sp,-32
400484: 0000000c syscall
400488: 27bd0020 addiu sp,sp,32
40048c: 10e00001 beqz a3,400494 <sys_brk+0x18>
400490: 00021023 negu v0,v0
400494: 03e00008 jr ra
It is obviously wrong, the "negu" instruction is placed in beqz's
delayed slot, and worse, there's no nop nor instruction after the
return, so the next function's first instruction (addiu sip,sip,-32)
will also be executed as part of the delayed slot that follows the
return.
This is caused by the ".set noreorder" directive in the _start block,
that applies to the whole program. The compiler emits code without the
delayed slots and relies on the compiler to swap instructions when this
option is not set. Removing the option would require to change the
startup code in a way that wouldn't make it look like the resulting
code, which would not be easy to debug. Instead let's just save the
default ordering before changing it, and restore it at the end of the
_start block. Now the code is correct:
0040047c <sys_brk>:
40047c: 24020fcd li v0,4045
400480: 27bdffe0 addiu sp,sp,-32
400484: 0000000c syscall
400488: 10e00002 beqz a3,400494 <sys_brk+0x18>
40048c: 27bd0020 addiu sp,sp,32
400490: 00021023 negu v0,v0
400494: 03e00008 jr ra
400498: 00000000 nop
Fixes: 66b6f755ad45 ("rcutorture: Import a copy of nolibc") #5.0
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The mode field has the type encoded as an value in a field, not as a bit
mask. Mask the mode with S_IFMT instead of each type to test. Otherwise,
false positives are possible: eg S_ISDIR will return true for block
devices because S_IFDIR = 0040000 and S_IFBLK = 0060000 since mode is
masked with S_IFDIR instead of S_IFMT. These macros now match the
similar definitions in tools/include/uapi/linux/stat.h.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The kernel uses unsigned long for the fd_set bitmap,
but nolibc use u32. This works fine on little endian
machines, but fails on big endian. Convert to unsigned
long to fix this.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Hand-written asm often contains non-function symbols in executable
sections. _end symbols for finding the size of instruction blocks
for runtime processing is one such usage.
optprobe_template_end is one example that causes the warning:
objtool: optprobe_template_end(): can't find starting instruction
This is because the symbol happens to be at the end of the file (and
therefore end of a section in the object file).
So ignore end-of-section STT_NOTYPE symbols instead of bailing out
because an instruction can't be found. While we're here, add a more
descriptive warning for STT_FUNC symbols found at the end of a
section.
[ This also solves a PowerPC regression reported by Sathvika Vasireddy. ]
Reported-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reported-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Sathvika Vasireddy <sv@linux.ibm.com>
Link: https://lore.kernel.org/r/20221220101323.3119939-1-npiggin@gmail.com
|
|
The use of strncpy() in the set_led_id() was incorrect.
The len variable should use 'min(sizeof(buf2) - 1, count)'
expression.
Use strscpy() function to simplify things and handle the error gracefully.
Fixes: a135dfb5de15 ("ALSA: led control - add sysfs kcontrol LED marking layer")
Reported-by: yang.yang29@zte.com.cn
Link: https://lore.kernel.org/alsa-devel/202301091945513559977@zte.com.cn/
Cc: <stable@vger.kernel.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
commit 45bd8951806e ("arm64: Improve HAVE_DYNAMIC_FTRACE_WITH_REGS
selection for clang") fixed the build with the above combination by
splitting HAVE_DYNAMIC_FTRACE_WITH_REGS into separate checks for
Clang and GCC.
commit 26299b3f6ba2 ("ftrace: arm64: move from REGS to ARGS") added the
GCC only check "-fpatchable-function-entry=2" back in unconditionally
which breaks the build.
Remove the unconditional check, because the conditional ones were also
updated to _ARGS in the above commit, so they work correctly on their
own.
Fixes: 26299b3f6ba2 ("ftrace: arm64: move from REGS to ARGS")
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20230109122744.1904852-1-james.clark@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
With only two levels of page-table, the generic 'pud_*' macros are
implemented using dummy operations in pgtable-nopmd.h. Since commit
730a11f982e6 ("arm64/mm: add pud_user_exec() check in
pud_user_accessible_page()"), pud_user_accessible_page() unconditionally
calls pud_user_exec(), which is an arm64-specific helper and therefore
isn't defined by pgtable-nopmd.h. This results in a build failure for
configurations with only two levels of page table:
arch/arm64/include/asm/pgtable.h: In function 'pud_user_accessible_page':
>> arch/arm64/include/asm/pgtable.h:870:51: error: implicit declaration of function 'pud_user_exec'; did you mean 'pmd_user_exec'? [-Werror=implicit-function-declaration]
870 | return pud_leaf(pud) && (pud_user(pud) || pud_user_exec(pud));
| ^~~~~~~~~~~~~
| pmd_user_exec
Fix the problem by defining pud_user_exec() as pud_user() in this case.
Link: https://lore.kernel.org/r/202301080515.z6zEksU4-lkp@intel.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
gem_context_register() makes the context visible to userspace, and which
point a separate thread can trigger the I915_GEM_CONTEXT_DESTROY ioctl.
So we need to ensure that nothing uses the ctx ptr after this. And we
need to ensure that adding the ctx to the xarray is the *last* thing
that gem_context_register() does with the ctx pointer.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes: eb4dedae920a ("drm/i915/gem: Delay tracking the GEM context until it is registered")
Fixes: a4c1cdd34e2c ("drm/i915/gem: Delay context creation (v3)")
Fixes: 49bd54b390c2 ("drm/i915: Track all user contexts per client")
Cc: <stable@vger.kernel.org> # v5.10+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
[tursulin: Stable and fixes tags add/tidy.]
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230103234948.1218393-1-robdclark@gmail.com
(cherry picked from commit bed4b455cf5374e68879be56971c1da563bcd90c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
A nested dma_resv_reserve_fences(1) will not reserve slot from the
2nd call onwards and folowing dma_resv_add_fence() might hit the
"BUG_ON(fobj->num_fences >= fobj->max_fences)" check.
I915 hit above nested dma_resv case in ttm_bo_handle_move_mem() with
async unbind:
dma_resv_reserve_fences() from --> ttm_bo_handle_move_mem()
dma_resv_reserve_fences() from --> i915_vma_unbind_async()
dma_resv_add_fence() from --> i915_vma_unbind_async()
dma_resv_add_fence() from -->ttm_bo_move_accel_cleanup()
Resolve this by adding an extra fence in i915_vma_unbind_async().
Suggested-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Fixes: 2f6b90da9192 ("drm/i915: Use vma resources for async unbinding")
Cc: <stable@vger.kernel.org> # v5.18+
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221223092011.11657-1-nirmoy.das@intel.com
(cherry picked from commit 4f0755c2faf7388616109717facc5bbde6850e60)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
snd_usb_find_implicit_fb_sync_format()
Handle the fallback code path, too.
Fixes: fd28941cff1c ("ALSA: usb-audio: Add new quirk FIXED_RATE for JBL Quantum810 Wireless")
BugLink: https://lore.kernel.org/alsa-devel/Y7frf3N%2FxzvESEsN@kili/
Reported-by: Dan Carpenter <error27@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230109141133.335543-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
with clang
While running 'perf test' for bpf, observed that "BPF prologue
generation" test case fails to compile with clang. Logs below from
powerpc:
<stdin>:33:2: error: use of undeclared identifier 'fmode_t'
fmode_t f_mode = (fmode_t)_f_mode;
^
<stdin>:37:6: error: use of undeclared identifier 'f_mode'; did you mean '_f_mode'?
if (f_mode & FMODE_WRITE)
^~~~~~
_f_mode
<stdin>:30:60: note: '_f_mode' declared here
int bpf_func__null_lseek(void *ctx, int err, unsigned long _f_mode,
^
2 errors generated.
The test code tests/bpf-script-test-prologue.c uses fmode_t. And the
error above is for "fmode_t" which is defined in include/linux/types.h
as part of kernel build directory: "/lib/modules/<kernel_version>/build"
that comes from kernel devel [ soft link to /usr/src/<kernel_version> ].
Clang picks this header file from "-working-directory" build option that
specifies this build folder.
But the commit 14e4b9f4289aed2c ("perf trace: Raw augmented syscalls fix
libbpf 1.0+ compatibility") changed the include directory to use:
"/usr/include".
Post this change, types.h from /usr/include/ is getting picked upwhich
doesn’t contain definition of "fmode_t" and hence fails to compile.
Compilation command before this commit:
/usr/bin/clang -D__KERNEL__ -D__NR_CPUS__=72 -DLINUX_VERSION_CODE=0x50e00 -xc -I/root/lib/perf/include/bpf -nostdinc -I./arch/powerpc/include -I./arch/powerpc/include/generated -I./include -I./arch/powerpc/include/uapi -I./arch/powerpc/include/generated/uapi -I./include/uapi -I./include/generated/uapi -include ./include/linux/compiler-version.h -include ./include/linux/kconfig.h -Wno-unused-value -Wno-pointer-sign -working-directory /lib/modules/<ver>/build -c - -target bpf -g -O2 -o -
Compilation command after this commit:
/usr/bin/clang -D__KERNEL__ -D__NR_CPUS__=72 -DLINUX_VERSION_CODE=0x50e00 -xc -I/usr/include/ -nostdinc -I./arch/powerpc/include -I./arch/powerpc/include/generated -I./include -I./arch/powerpc/include/uapi -I./arch/powerpc/include/generated/uapi -I./include/uapi -I./include/generated/uapi -include ./include/linux/compiler-version.h -include ./include/linux/kconfig.h -Wno-unused-value -Wno-pointer-sign -working-directory /lib/modules/<ver>/build -c - -target bpf -g -O2 -o -
The difference is addition of -I/usr/include/ in the first line which
is causing the error. Fix this by adding typedef for "fmode_t" in the
testcase to solve the compile issue.
Fixes: 14e4b9f4289aed2c ("perf trace: Raw augmented syscalls fix libbpf 1.0+ compatibility")
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/linux-perf-users/20230105120436.92051-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Since commit 80b6093b55e3 ("kbuild: add -Wundef to KBUILD_CPPFLAGS
for W=1 builds"), building with W=1 detects misuse of #(el)if.
$ make W=1 ARCH=s390 CROSS_COMPILE=s390x-linux-gnu-
[snip]
arch/s390/boot/decompressor.c:28:7: warning: "CONFIG_KERNEL_ZSTD" is not defined, evaluates to 0 [-Wundef]
28 | #elif CONFIG_KERNEL_ZSTD
| ^~~~~~~~~~~~~~~~~~
This issue has been hidden because arch/s390/boot/Makefile overwrites
KBUILD_CFLAGS, dropping -Wundef.
CONFIG_KERNEL_ZSTD is a bool option. #elif defined() should be used.
The line #ifdef CONFIG_KERNEL_BZIP2 is fine, but I changed it for
consistency.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20230106161024.2373602-1-masahiroy@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
On SC7280 ADSP bypassed platform, there are only three clocks for TX
macro. This is already reflected in "clock-names" but not in "clocks"
property:
sc7280-herobrine-zombie-lte.dtb: codec@3220000: clocks: [[219, 8], [219, 7], [220]] is too short
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221225115907.55250-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SM8250 DTS uses additional "va" clock in WSA macro device node:
sm8250-sony-xperia-edo-pdx203.dtb: codec@3240000: clock-names: ['mclk', 'npl', 'macro', 'dcodec', 'va', 'fsgen'] is too long
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221225115907.55250-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Older Qualcomm platforms like APQ8016 do not have hardware support for
SoundWire, so kernel configurations made specifically for those platforms
will usually not have CONFIG_SOUNDWIRE enabled.
Unfortunately commit 8d89cf6ff229 ("ASoC: qcom: cleanup and fix
dependency of QCOM_COMMON") breaks those kernel configurations, because
SOUNDWIRE is now a required dependency for SND_SOC_QCOM_COMMON (and in
turn also SND_SOC_APQ8016_SBC). Trying to migrate such a kernel config
silently disables SND_SOC_APQ8016_SBC and breaks audio functionality.
The soundwire helpers in common.c are only used by two of the Qualcomm
audio machine drivers, so building and requiring CONFIG_SOUNDWIRE for
all platforms is unnecessary.
There is no need to stuff all common code into a single module. Fix the
issue by moving the soundwire helpers to a separate SND_SOC_QCOM_SDW
module/option that is selected only by the machine drivers that make
use of them. This also allows reverting the imply/depends changes from
the previous fix because both SM8250 and SC8280XP already depend on
SOUNDWIRE, so the soundwire helpers will be only built if SOUNDWIRE
is really enabled.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Fixes: 8d89cf6ff229 ("ASoC: qcom: cleanup and fix dependency of QCOM_COMMON")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20221231115506.82991-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add the missing #include of asm/assembler.h, which is where the ldr_l
macro is defined.
Fixes: ff7a167961d1b97e ("arm64: efi: Execute runtime services from a dedicated stack")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
From the perspective of the uncore PMU, the new Emerald Rapids is the
same as the Sapphire Rapids. The only difference is the event list,
which will be supported in the perf tool later.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230106160449.3566477-4-kan.liang@linux.intel.com
|
