| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/defconfig
Rockchip support for basic camera interface (CIF) and Synopsis DW-DP
driver, as well as the CEC extension to the DW-HDMI-QP driver.
* tag 'v6.19-rockchip-defconfig64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: defconfig: enable rockchip camera interface
arm64: defconfig: Enable DW HDMI QP CEC support
arm64: defconfig: Enable Rockchip extensions for Synopsys DW DP
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig
Qualcomm Arm64 defconfig updates for v6.19
Enable config options for the hardare used across Fairphone 3, 4, and 5.
Then enable Novatek display panels founds on Xiaomi Pocophone F1, and
the SM8750 MTP, eUSB2 PHY found in SM8750, NSS clock controller found in
IPQ5424, the SX150x gpio expander used in QCS615 reference device, and
the support for UFS inline crypto.
* tag 'qcom-arm64-defconfig-for-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Enable SX150x GPIO expander driver
arm64: defconfig: Build NSS clock controller driver for IPQ5424
arm64: defconfig: Enable SCSI UFS Crypto and Block Inline encryption drivers
arm64: defconfig: Add M31 eUSB2 PHY config
arm64: defconfig: Enable configs for Fairphone 3, 4, 5 smartphones
arm64: defconfig: Enable two Novatek display panels for MTP8750 and Tianma
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into soc/defconfig
multi_v7_defconfig: Enable TI PRU Ethernet driver
* tag 'omap-for-v6.19/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap:
ARM: multi_v7_defconfig: Enable TI PRU Ethernet driver
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/defconfig
Microchip AT91 defconfig updates for v6.19
This update includes:
- CONFIG_MMC_SPI is set to module for at91_dt_defconfig
* tag 'at91-defconfig-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: at91: at91_dt_defconfig: set MMC_SPI to module
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/defconfig
i.MX defconfig changes for 6.19:
- Enable sound drivers for imx28-amarula-rmm in mxs_defconfig
- Enable i.MX AIPSTZ driver, i.MX95 pinctrl driver, Ethernet and PCIe
support in arm64 defconfig
* tag 'imx-defconfig-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: enable i.MX AIPSTZ driver
ARM: mxs_defconfig: enable sound drivers for imx28-amarula-rmm
arm64: defconfig: Enable i.MX95 drivers for pinctrl, Ethernet and PCIe
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/defconfig
arm64: tegra: Default configuration changes for v6.19-rc1
Enable the new driver for the VRS PSEQ RTC found on Tegra234 and later.
* tag 'tegra-for-6.19-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: defconfig: Enable NVIDIA VRS PSEQ RTC
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/defconfig
ARM: tegra: Default configuration changes for v6.19-rc1
Enable ext4 by default on Tegra to restore systems booting from MMC.
* tag 'tegra-for-6.19-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Enable EXT4 for Tegra
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/defconfig
MediaTek defconfig updates
As MediaTek boards with UFS appeared some time ago, this adds a
single commit enabling the MediaTek UFS driver, allowing those
boards to boot over UFS as primary storage.
* tag 'mtk-defconfig-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
arm64: defconfig: Enable UFS support for MediaTek Genio 1200 EVK UFS board
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Enable the Exynos ACPM clocks driver. Samsung Exynos platforms
implement ACPM to provide support for clock configuration, PMIC
and temperature sensors.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Tested-by: Peter Griffin <peter.griffin@linaro.org> # on gs101-oriole
Link: https://patch.msgid.link/20251010-acpm-clk-v6-5-321ee8826fd4@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20251110121344.120785-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/defconfig
Renesas ARM defconfig updates for v6.19
- Enable support for the Renesas RZ/G3S and RZ/G3E thermal drivers,
and the RZ/T2H and RZ/N2H ADC drivers in the ARM64 defconfig,
- Refresh the ARM SH-Mobile defconfig for v6.18-rc1.
* tag 'renesas-arm-defconfig-for-v6.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable RZ/T2H / RZ/N2H ADC driver
ARM: shmobile: defconfig: Refresh for v6.18-rc1
arm64: defconfig: Enable the Renesas RZ/G3E thermal driver
arm64: defconfig: Enable Renesas RZ/G3S thermal driver
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The patch "7bd291abe2d sched: Unify the SCHED_{SMT,CLUSTER,MC} Kconfig"
has enabled the SCHED_MC/SCHED_SMT by default for arm64.
So remove the redundant code in defconfig.
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Huang Shijie <shijie@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20251021075704.527626-1-shijie@os.amperecomputing.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The Programmable Real-time Unit and Industrial Communication Subsystem
Megabit (ICSSM) is a microcontroller subsystem in TI SoCs such as
AM57x, AM437x, and AM335x. It provides real-time processing
capabilities for industrial communication and custom peripheral interfaces.
Currently, EVMs based on AM57x, AM437x, and AM335x use the ICSSM driver
for PRU-based Ethernet functionality.
This patch enables TI_PRUSS and TI_PRUETH as a module for TI SoCs.
Signed-off-by: Parvathi Pudi <parvathi@couthit.com>
Link: https://lore.kernel.org/r/20251103125451.1679404-1-parvathi@couthit.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
Enable the i.MX AIPSTZ driver, which is used for i.MX8MP-based boards such
as NXP's IMX8MP-EVK.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Enable TLV320AIC3X I2C codec and simple-card support used on Amarula
rmm board.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Enable i.MX95 pinctrl driver necessary for booting. Also enable the
missing drivers required for Ethernet and PCIe functionality. These
drivers are used on i.MX95 boards, including the NXP i.MX95 19x19 EVK.
The below configurations were enabled (listed with their DT nodes on
imx95.dtsi):
* CONFIG_PINCTRL_IMX_SCMI for the `scmi_iomuxc` pinctrl.
* CONFIG_CLK_IMX95_BLK_CTL for the HSIO domain clock controller
(`hsio_blk_ctl`) used by the PCIe controller.
* CONFIG_NXP_NETC_BLK_CTRL for the NETC hardware domain controller
(`netc_blk_ctrl`).
* CONFIG_NXP_ENETC4 for the Ethernet controller (`enetc_port*`).
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The Rockchip Camera Interface (CIF) is featured in many Rockchip SoCs
in different variations.
Enable the driver for it in the default configuration.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Link: https://patch.msgid.link/20240220-rk3568-vicap-v15-11-8f4915ee365d@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
After commit d6ace46c82fd ("ext4: remove obsolete EXT3 config options")
was added, when using the 'tegra_defconfig' kernel configuration,
mounting an MMC device on Tegra20, Tegra30 and Tegra124 boards is
failing with "unknown filesystem type 'ext4'". Fix this by updating the
'tegra_defconfig' to use the EXT4 config options and remove the
obselete EXT2/3 options.
Fixes: d6ace46c82fd ("ext4: remove obsolete EXT3 config options")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Enable NVIDIA VRS (Voltage Regulator Specification) RTC device module.
It provides functionality to get/set system time, retain system time
across boot, wake system from suspend and shutdown state.
Supported platforms:
- NVIDIA Jetson AGX Orin Developer Kit
- NVIDIA IGX Orin Development Kit
- NVIDIA Jetson Orin NX Developer Kit
- NVIDIA Jetson Orin Nano Developer Kit
Signed-off-by: Shubhi Garg <shgarg@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The ANX7625 bridge on the Qualcomm QCS615 Ride reference board is connected
to a Semtech SX150x GPIO expander. Enable the SX150x driver to make the
display on boards built following this design functional.
Signed-off-by: Fange Zhang <fange.zhang@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251105-enable-sx150x-gpio-expander-v3-1-2ec8dfde2c9e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Change CONFIG_MMC_SPI from built-in to module in the
at91_dt_defconfig. This allows the MMC over SPI driver to
be loaded only when needed for WILC subsystem.
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Link: https://lore.kernel.org/r/20250923094552.430595-1-manikandan.m@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
NSS clock controller is needed for supplying clocks and resets to the
networking blocks for the Ethernet functions on the IPQ5424 platforms.
All boards based on the IPQ5424 SoC will require this driver to be enabled.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://lore.kernel.org/r/20251014-qcom_ipq5424_nsscc-v7-10-081f4956be02@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
These drivers will allow using the crypto functionalities of the UFS
device, like Inline Crypto Encryption. Both of these drivers are of type
'bool', so they cannot be built as modules.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/20251030095509.5877-1-manivannan.sadhasivam@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The Qualcomm SM8750 SoCs use an eUSB2 PHY driver different from the
already existing M31 USB driver because it requires a connection
to an eUSB2 repeater. Thus, for USB to probe and work properly on
the Qualcomm SM8750 SoCs, enable the additional driver.
Signed-off-by: Melody Olvera <melody.olvera@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251021-knp-usb-v2-4-a2809fffcfab@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable base options for MSM8953 and SM6350 SoCs and device-specific
options which are used on the Fairphone 3, Fairphone 4 and Fairphone 5.
* MSM8953 SoC
MSM_GCC_8953, INTERCONNECT_QCOM_MSM8953
* Fairphone 3
NFC_NXP_NCI*, TOUCHSCREEN_HIMAX_HX83112B, DRM_PANEL_HIMAX_HX83112B
* SM6350 SoC
SM_CAMCC_6350, SM_DISPCC_6350, SM_GCC_6350, SM_GPUCC_6350,
SM_VIDEOCC_6350, INTERCONNECT_QCOM_SM6350
* Fairphone 4
DRM_PANEL_HIMAX_HX83112A
* Fairphone 5
DRM_PANEL_RAYDIUM_RM692E5, TYPEC_MUX_PTN36502, INPUT_AW86927
* QCOM PMICs (used on multiple of the devices)
BACKLIGHT_QCOM_WLED, MFD_QCOM_PM8008, REGULATOR_QCOM_PM8008,
LEDS_CLASS_FLASH, LEDS_QCOM_FLASH
* USB audio offloading (enabled on Fairphone 4 & 5)
SND_USB_AUDIO*, SND_SOC_USB, SND_SOC_QDSP6_USB, USB_XHCI_SIDEBAND
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251014-arm64-defconfig-fp345-v1-1-53fe1eeb598d@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable drivers for Novatek NT36672A panel (used on Xiaomi Pocophone F1
Tianma, Qualcomm SDM845 SoC) and Novatek NT37801 panel (used on Qualcomm
MTP8750 development board).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20251009021507.175290-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc/android driver fixes for 6.18-rc3 for
reported issues. Included in here are:
- rust binder fixes for reported issues
- mei device id addition
- mei driver fixes
- comedi bugfix
- most usb driver bugfixes
- fastrpc memory leak fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
most: usb: hdm_probe: Fix calling put_device() before device initialization
most: usb: Fix use-after-free in hdm_disconnect
binder: remove "invalid inc weak" check
mei: txe: fix initialization order
comedi: fix divide-by-zero in comedi_buf_munge()
mei: late_bind: Fix -Wincompatible-function-pointer-types-strict
misc: fastrpc: Fix dma_buf object leak in fastrpc_map_lookup
mei: me: add wildcat lake P DID
misc: amd-sbi: Clarify that this is a BMC driver
nvmem: rcar-efuse: add missing MODULE_DEVICE_TABLE
binder: Fix missing kernel-doc entries in binder.c
rust_binder: report freeze notification only when fully frozen
rust_binder: don't delete FreezeListener if there are pending duplicates
rust_binder: freeze_notif_done should resend if wrong state
rust_binder: remove warning about orphan mappings
rust_binder: clean `clippy::mem_replace_with_default` warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes for the gpib subsystem to
resolve some reported issues. Included in here are:
- memory leak fixes
- error code fixes
- proper protocol fixes
All of these have been in linux-next for almost 2 weeks now with no
reported issues"
* tag 'staging-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: gpib: Fix device reference leak in fmh_gpib driver
staging: gpib: Return -EINTR on device clear
staging: gpib: Fix sending clear and trigger events
staging: gpib: Fix no EOI on 1 and 2 byte writes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for reported issues.
Included in here are:
- sh-sci serial driver fixes
- 8250_dw and _mtk driver fixes
- sc16is7xx driver bugfix
- new 8250_exar device ids added
All of these have been in linux-next this past week with no reported
issues"
* tag 'tty-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_mtk: Enable baud clock and manage in runtime PM
serial: 8250_dw: handle reset control deassert error
dt-bindings: serial: sh-sci: Fix r8a78000 interrupts
serial: sc16is7xx: remove useless enable of enhanced features
serial: 8250_exar: add support for Advantech 2 port card with Device ID 0x0018
tty: serial: sh-sci: fix RSCI FIFO overrun handling
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for 6.18-rc3.
Included in here are:
- new option serial driver device ids added
- dt bindings fixes for numerous platforms
- xhci bugfixes for many reported regressions
- usbio dependency bugfix
- dwc3 driver fix
- raw-gadget bugfix
All of these have been in linux-next this week with no reported issues"
* tag 'usb-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: option: add Telit FN920C04 ECM compositions
USB: serial: option: add Quectel RG255C
tcpm: switch check for role_sw device with fw_node
usb/core/quirks: Add Huawei ME906S to wakeup quirk
usb: raw-gadget: do not limit transfer length
USB: serial: option: add UNISOC UIS7720
xhci: dbc: enable back DbC in resume if it was enabled before suspend
xhci: dbc: fix bogus 1024 byte prefix if ttyDBC read races with stall event
usb: xhci-pci: Fix USB2-only root hub registration
dt-bindings: usb: qcom,snps-dwc3: Fix bindings for X1E80100
usb: misc: Add x86 dependency for Intel USBIO driver
dt-bindings: usb: switch: split out ports definition
usb: dwc3: Don't call clk_bulk_disable_unprepare() twice
dt-bindings: usb: dwc3-imx8mp: dma-range is required only for imx8mp
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Remove dead code leftovers after a recent mitigations cleanup which
fail a Clang build
- Make sure a Retbleed mitigation message is printed only when
necessary
- Correct the last Zen1 microcode revision for which Entrysign sha256
check is needed
- Fix a NULL ptr deref when mounting the resctrl fs on a system which
supports assignable counters but where L3 total and local bandwidth
monitoring has been disabled at boot
* tag 'x86_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Remove dead code which might prevent from building
x86/bugs: Qualify RETBLEED_INTEL_MSG
x86/microcode: Fix Entrysign revision check for Zen1/Naples
x86,fs/resctrl: Fix NULL pointer dereference with events force-disabled in mbm_event mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Restore the original buslock locking in a couple of places in the irq
core subsystem after a rework
* tag 'irq_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/manage: Add buslock back in to enable_irq()
genirq/manage: Add buslock back in to __disable_irq_nosync()
genirq/chip: Add buslock back in to irq_set_handler()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
- Fix x32 build due to wrong format specifier on that sub-arch
- Add one more Rust noreturn function to objtool's list
* tag 'objtool_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix failure when being compiled on x32 system
objtool/rust: add one more `noreturn` Rust function
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Borislav Petkov:
- Make sure a CFS runqueue on a throttled hierarchy has its PELT clock
throttled otherwise task movement and manipulation would lead to
dangling cfs_rq references and an eventual crash
* tag 'sched_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Start a cfs_rq on throttled hierarchy with PELT clock throttled
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Borislav Petkov:
- Do not create more than eight (max supported) AUX clocks sysfs
hierarchies
* tag 'timers_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Fix aux clocks sysfs initialization loop bound
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- In Device::parent(), do not make any assumptions on the device
context of the parent device
- Check visibility before changing ownership of a sysfs attribute
group
- In topology_parse_cpu_capacity(), replace an incorrect usage of
PTR_ERR_OR_ZERO() with IS_ERR_OR_NULL()
- In devcoredump, fix a circular locking dependency between
struct devcd_entry::mutex and kernfs
- Do not warn about a pending fw_devlink sync state
* tag 'driver-core-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
arch_topology: Fix incorrect error check in topology_parse_cpu_capacity()
rust: device: fix device context of Device::parent()
sysfs: check visibility before changing group attribute ownership
devcoredump: Fix circular locking dependency with devcd->mutex.
driver core: fw_devlink: Don't warn about sync_state() pending
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fixes from Takashi Sakamoto:
"A small collection of FireWire fixes. This includes corrections to
sparse and API documentation"
* tag 'firewire-fixes-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: init_ohci1394_dma: add missing function parameter documentation
firewire: core: fix __must_hold() annotation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
- Close a race during boot between userspace vDSO usage and some
late-initialized vDSO data
- Improve performance on systems with non-CPU-cache-coherent
DMA-capable peripherals by enabling write combining on
pgprot_dmacoherent() allocations
- Add human-readable detail for RISC-V IPI tracing
- Provide more information to zsmalloc on 64-bit RISC-V to improve
allocation
- Silence useless boot messages about CPUs that have been disabled in
DT
- Resolve some compiler and smatch warnings and remove a redundant
macro
* tag 'riscv-for-linus-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: hwprobe: avoid uninitialized variable use in hwprobe_arch_id()
riscv: cpufeature: avoid uninitialized variable in has_thead_homogeneous_vlenb()
riscv: hwprobe: Fix stale vDSO data for late-initialized keys at boot
riscv: add a forward declaration for cpuinfo_op
RISC-V: Don't print details of CPUs disabled in DT
riscv: Remove the PER_CPU_OFFSET_SHIFT macro
riscv: mm: Define MAX_POSSIBLE_PHYSMEM_BITS for zsmalloc
riscv: Register IPI IRQs with unique names
ACPI: RIMT: Fix unused function warnings when CONFIG_IOMMU_API is disabled
RISC-V: Define pgprot_dmacoherent() for non-coherent devices
|
|
Pull xfs fixes from Carlos Maiolino:
"The main highlight here is a fix for a bug brought in by the removal
of attr2 mount option, where some installations might actually have
'attr2' explicitly configured in fstab preventing system to boot by
not being able to remount the rootfs as RW.
Besides that there are a couple fix to the zonefs implementation,
changing XFS_ONLINE_SCRUB_STATS to depend on DEBUG_FS (was select
before), and some other minor changes"
* tag 'xfs-fixes-6.18-rc3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix locking in xchk_nlinks_collect_dir
xfs: loudly complain about defunct mount options
xfs: always warn about deprecated mount options
xfs: don't set bt_nr_sectors to a negative number
xfs: don't use __GFP_NOFAIL in xfs_init_fs_context
xfs: cache open zone in inode->i_private
xfs: avoid busy loops in GCD
xfs: XFS_ONLINE_SCRUB_STATS should depend on DEBUG_FS
xfs: do not tightly pack-write large files
xfs: Improve CONFIG_XFS_RT Kconfig help
|
|
Pull smb server fixes from Steve French:
"smbdirect (RDMA) fixes in order avoid potential submission queue
overflows:
- free transport teardown fix
- credit related fixes (five server related, one client related)"
* tag 'v6.18-rc2-smb-server-fixes' of git://git.samba.org/ksmbd:
smb: server: let free_transport() wait for SMBDIRECT_SOCKET_DISCONNECTED
smb: client: make use of smbdirect_socket.send_io.lcredits.*
smb: server: make use of smbdirect_socket.send_io.lcredits.*
smb: server: simplify sibling_list handling in smb_direct_flush_send_list/send_done
smb: server: smb_direct_disconnect_rdma_connection() already wakes all waiters on error
smb: smbdirect: introduce smbdirect_socket.send_io.lcredits.*
smb: server: allocate enough space for RW WRs and ib_drain_qp()
|
|
Clang is not happy with set but unused variable (this is visible
with `make W=1` build:
kernel/sched/sched.h:3744:18: error: variable 'cpumask' set but not used [-Werror,-Wunused-but-set-variable]
It seems like the variable was never used along with the assignment
that does not have side effects as far as I can see. Remove those
altogether.
Fixes: 223baf9d17f2 ("sched: Fix performance regression introduced by mm_cid")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull drm fixes from Simona Vetter:
"Very quiet, all just small stuff and nothing scary pending to my
knowledge:
- drm_panic: bunch of size calculation fixes
- pantor: fix kernel panic on partial gpu va unmap
- rockchip: hdmi hotplug setup fix
- amdgpu: dp mst, dc/display fixes
- i915: fix panic structure leak
- xe: madvise uapi fix, wq alloc error, vma flag handling fix"
* tag 'drm-fixes-2025-10-24' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe: Check return value of GGTT workqueue allocation
drm/amd/display: use GFP_NOWAIT for allocation in interrupt handler
drm/amd/display: increase max link count and fix link->enc NULL pointer access
drm/amd/display: Fix NULL pointer dereference
drm/panic: Fix 24bit pixel crossing page boundaries
drm/panic: Fix divide by 0 if the screen width < font width
drm/panic: Fix kmsg text drawing rectangle
drm/panic: Fix qr_code, ensure vmargin is positive
drm/panic: Fix overlap between qr code and logo
drm/panic: Fix drawing the logo on a small narrow screen
drm/xe/uapi: Hide the madvise autoreset behind a VM_BIND flag
drm/xe: Retain vma flags when recreating and splitting vmas for madvise
drm/i915/panic: fix panic structure allocation memory leak
drm/panthor: Fix kernel panic on partial unmap of a GPU VA region
drm/rockchip: dw_hdmi: use correct SCLIN mask for RK3228
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Add DWC custom pci_ops for the root bus instead of overwriting the
DBI base address, which broke drivers that rely on the DBI address
for iATU programming; fixes an FU740 probe regression (Krishna
Chaitanya Chundru)
- Revert qcom ECAM enablement, which is rendered unnecessary by the DWC
custom pci_ops (Krishna Chaitanya Chundru)
- Fix longstanding MIPS Malta resource registration issues to avoid
exposing them when the next commit fixes the boot failure (Maciej W.
Rozycki)
- Use pcibios_align_resource() on MIPS Malta to fix boot failure caused
by using the generic pci_enable_resources() (Ilpo Järvinen)
- Enable only ASPM L0s and L1, not L1 PM Substates, for devicetree
platforms because we lack information required to configure L1
Substates; fixes regressions on powerpc and rockchip. A qcom
regression (L1 Substates no longer enabled) remains and will be
addressed next (Bjorn Helgaas)
* tag 'pci-v6.18-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/ASPM: Enable only L0s and L1 for devicetree platforms
MIPS: Malta: Use pcibios_align_resource() to block io range
MIPS: Malta: Fix PCI southbridge legacy resource reservations
MIPS: Malta: Fix keyboard resource preventing i8042 driver from registering
Revert "PCI: qcom: Prepare for the DWC ECAM enablement"
PCI: dwc: Use custom pci_ops for root bus DBI vs ECAM config access
|
|
Add missing kernel-doc parameter descriptions for five functions
in init_ohci1394_dma.c to fix documentation warnings when building
with W=1.
This patch addresses the following warnings:
- init_ohci1394_wait_for_busresets: missing @ohci description
- init_ohci1394_enable_physical_dma: missing @ohci description
- init_ohci1394_reset_and_init_dma: missing @ohci description
- init_ohci1394_controller: missing @num, @slot, @func descriptions
- setup_ohci1394_dma: missing @opt description
Tested with GCC 13.2.0 and W=1 flag. All documentation warnings
for these functions have been resolved.
Signed-off-by: Nirbhay Sharma <nirbhay.lkd@gmail.com>
Link: https://lore.kernel.org/r/20251024203219.101990-2-nirbhay.lkd@gmail.com
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fix from Eric Biggers:
"Avoid some false-positive KMSAN warnings by restoring the dependency
of the architecture-optimized Poly1305 code on !KMSAN"
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: poly1305: Restore dependency of arch code on !KMSAN
|
|
Pull smb client fixes from Steve French:
- add missing tracepoints
- smbdirect (RDMA) fix
- fix potential issue with credits underflow
- rename fix
- improvement to calc_signature and additional cleanup patch
* tag '6.18-rc2-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: #include cifsglob.h before trace.h to allow structs in tracepoints
cifs: Call the calc_signature functions directly
smb: client: get rid of d_drop() in cifs_do_rename()
cifs: Fix TCP_Server_Info::credits to be signed
cifs: Add a couple of missing smb3_rw_credits tracepoints
smb: client: allocate enough space for MR WRs and ib_drain_qp()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- Fix dma alignment for PI
- Fix selinux bogosity with nbd, where sendmsg would get rejected
* tag 'block-6.18-20251023' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
block: require LBA dma_alignment when using PI
nbd: override creds to kernel when calling sock_{send,recv}msg()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Add MAINTAINERS entry for zcrx, mostly so that netdev gets
automatically CC'ed by default on any changes there too.
- Fix for the SQPOLL busy vs work time accounting.
It was using getrusage(), which was both broken from a thread point
of view (we only care about the SQPOLL thread itself), and vastly
overkill as only the systime was used. On top of that, also be a bit
smarter in when it's queried. It used excessive CPU before this
change. Marked for stable as well.
- Fix provided ring buffer auto commit for uring_cmd.
- Fix a few style issues and sparse annotation for a lock.
* tag 'io_uring-6.18-20251023' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: fix buffer auto-commit for multishot uring_cmd
io_uring: correct __must_hold annotation in io_install_fixed_file
io_uring zcrx: add MAINTAINERS entry
io_uring: Fix code indentation error
io_uring/sqpoll: be smarter on when to update the stime usage
io_uring/sqpoll: switch away from getrusage() for CPU accounting
io_uring: fix incorrect unlikely() usage in io_waitid_prep()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fixes from Vlastimil Babka:
- Two fixes for race conditions in obj_exts allocation (Hao Ge)
- Fix for slab accounting imbalance due to deferred slab decativation
(Vlastimil Babka)
* tag 'slab-for-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slab: Fix obj_ext mistakenly considered NULL due to race condition
slab: fix slab accounting imbalance due to defer_deactivate_slab()
slab: Avoid race on slab->obj_exts in alloc_slab_obj_exts
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix handling of GICv5 ITS MSI properties on platforms with
'msi-parent' as well as a of_node refcounting fix.
This is also preparation for further refactoring in 6.19 to use
common DT parsing of MSI properties.
* tag 'devicetree-fixes-for-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of/irq: Export of_msi_xlate() for module usage
of/irq: Fix OF node refcount in of_msi_get_domain()
of/irq: Add msi-parent check to of_msi_xlate()
|
