Age | Commit message (Collapse) | Author |
|
Adds the required quirk to enable the Cirrus amp and correct pins
on the ASUS ROG GZ301V series which uses an SPI connected Cirrus amp.
While this works if the related _DSD properties are made available, these
aren't included in the ACPI of these laptops (yet).
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230706223323.30871-2-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pull drm fixes from Dave Airlie:
"Lots of fixes, mostly i915 and amdgpu. It's two weeks of i915, and I
think three weeks of amdgpu.
fbdev:
- Fix module infos on sparc
panel:
- Fix mode on Starry-ili9882t
i915:
- Allow DC states along with PW2 only for PWB functionality [adlp+]
- Fix SSC selection for MPLLA [mtl]
- Use hw.adjusted mode when calculating io/fast wake times [psr]
- Apply min softlimit correctly [guc/slpc]
- Assign correct hdcp content type [hdcp]
- Add missing forward declarations/includes to display power headers
- Fix BDW PSR AUX CH data register offsets [psr]
- Use mock device info for creating mock device
amdgpu:
- Misc cleanups
- GFX 9.4.3 fixes
- DEBUGFS build fix
- Fix LPDDR5 reporting
- ASPM fixes
- DCN 3.1.4 fixes
- DP MST fixes
- DCN 3.2.x fixes
- Display PSR TCON fixes
- SMU 13.x fixes
- RAS fixes
- Vega12/20 SMU fixes
- PSP flashing cleanup
- GFX9 MCBP fixes
- SR-IOV fixes
- GPUVM clear mappings fix for always valid BOs
- Add FAMS quirk for problematic monitor
- Fix possible UAF
- Better handle monentary temperature fluctuations
- SDMA 4.4.2 fixes
- Fencing fix"
* tag 'drm-next-2023-07-07' of git://anongit.freedesktop.org/drm/drm: (83 commits)
drm/i915: use mock device info for creating mock device
drm/i915/psr: Fix BDW PSR AUX CH data register offsets
drm/amdgpu: Fix potential fence use-after-free v2
drm/amd/pm: avoid unintentional shutdown due to temperature momentary fluctuation
drm/amd/pm: expose swctf threshold setting for legacy powerplay
drm/amd/display: 3.2.241
drm/amd/display: Take full update path if number of planes changed
drm/amd/display: Create debugging mechanism for Gaming FAMS
drm/amd/display: Add monitor specific edid quirk
drm/amd/display: For new fast update path, loop through each surface
drm/amd/display: Remove Phantom Pipe Check When Calculating K1 and K2
drm/amd/display: Limit new fast update path to addr and gamma / color
drm/amd/display: Fix the delta clamping for shaper LUT
drm/amdgpu: Keep non-psp path for partition switch
drm/amd/display: program DPP shaper and 3D LUT if updated
Revert "drm/amd/display: edp do not add non-edid timings"
drm/amdgpu: share drm device for pci amdgpu device with 1st partition device
drm/amd/pm: Add GFX v9.4.3 unique id to sysfs
drm/amd/pm: Enable pp_feature attribute
drm/amdgpu/vcn: Need to unpause dpg before stop dpg
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These fix a couple of compiler warnings, refine an ACPI device
enumeration quirk to address a driver regression and clean up code.
Specifics:
- Make acpi_companion_match() return a const pointer and update its
callers accordingly (Andy Shevchenko)
- Move the extern declaration of the acpi_root variable to a header
file so as to address a compiler warning (Andy Shevchenko)
- Address compiler warnings in the ACPI device enumeration code by
adding a missing header file include to it (Ben Dooks)
- Refine the SMB0001 quirk in the ACPI device enumeration code so as
to address an i2c-scmi driver regression (Andy Shevchenko)
- Clean up two pieces of the ACPI device enumeration code (Andy
Shevchenko)"
* tag 'acpi-6.5-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: scan: Use the acpi_match_acpi_device() helper
ACPI: platform: Move SMB0001 HID to the header and reuse
ACPI: platform: Ignore SMB0001 only when it has resources
ACPI: bus: Introduce acpi_match_acpi_device() helper
ACPI: scan: fix undeclared variable warnings by including sleep.h
ACPI: bus: Constify acpi_companion_match() returned value
ACPI: scan: Move acpi_root to internal header
|
|
Pull mode documentation updates from Jonathan Corbet:
"A half-dozen late arriving docs patches. They are mostly fixes, but we
also have a kernel-doc tweak for enums and the long-overdue removal of
the outdated and redundant patch-submission comments at the top of the
MAINTAINERS file"
* tag 'docs-6.5-2' of git://git.lwn.net/linux:
scripts: kernel-doc: support private / public marking for enums
Documentation: KVM: SEV: add a missing backtick
Documentation: ACPI: fix typo in ssdt-overlays.rst
Fix documentation of panic_on_warn
docs: remove the tips on how to submit patches from MAINTAINERS
docs: fix typo in zh_TW and zh_CN translation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few mostly minor fixes that came in during the merge window, plus
one administrative update for Jonas' e-mail address.
The spi-geni-qcom fix is more major than the others, fixing the newly
added DMA support for large reads which trigger DMA"
* tag 'spi-fix-v6.5-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: bcm{63xx,bca}-hsspi: update my email address
spi: rzv2m-csi: Fix SoC product name
spi: bcm-qspi: return error if neither hif_mspi nor mspi is available
spi: spi-geni-qcom: enable SPI_CONTROLLER_MUST_TX for GPI DMA mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"A simple dependency fix for a newly added driver"
* tag 'regulator-fix-v6.5-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: raa215300: Add build dependency with COMMON_CLK
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix bad git merge of #endif in arm64 code
A merge of the arm64 tree caused #endif to go into the wrong place
- Fix crash on lseek of write access to tracefs/error_log
Opening error_log as write only, and then doing an lseek() causes a
kernel panic, because the lseek() handle expects a "seq_file" to
exist (which is not done on write only opens). Use tracing_lseek()
that tests for this instead of calling the default seq lseek handler.
- Check for negative instead of -E2BIG for error on strscpy() returns
Instead of testing for -E2BIG from strscpy(), to be more robust,
check for less than zero, which will make sure it catches any error
that strscpy() may someday return.
* tag 'trace-v6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/boot: Test strscpy() against less than zero for error
arm64: ftrace: fix build error with CONFIG_FUNCTION_GRAPH_TRACER=n
tracing: Fix null pointer dereference in tracing_err_log_open()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"This contains two minor fixes for Jan's rename locking work:
- Unlocking the source inode was guarded by a check whether source
was non-NULL. This doesn't make sense because source must be
non-NULL and the commit message explains in detail why
- The lock_two_nondirectories() helper called WARN_ON_ONCE() and
dereferenced the inodes unconditionally but the underlying
lock_two_inodes() helper and the kernel documentation for that
function are clear that it is valid to pass NULL arguments, so a
non-NULL check is needed. No callers currently pass NULL arguments
but let's not knowingly leave landmines around"
* tag 'v6.5/vfs.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: don't assume arguments are non-NULL
fs: no need to check source
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
Short summary of fixes pull:
* panel: Fix mode on Starry-ili9882t
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230706112203.GA30555@linux-uq9g
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Fix BDW PSR AUX CH data register offsets [psr] (Ville Syrjälä)
- Use mock device info for creating mock device (Jani Nikula)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZKZ6VIeInBYrBuph@tursulin-desk
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-fixes-6.5-2023-06-30-1:
amdgpu:
- Misc cleanups
- GFX 9.4.3 fixes
- DEBUGFS build fix
- Fix LPDDR5 reporting
- ASPM fixes
- DCN 3.1.4 fixes
- DP MST fixes
- DCN 3.2.x fixes
- Display PSR TCON fixes
- SMU 13.x fixes
- RAS fixes
- Vega12/20 SMU fixes
- PSP flashing cleanup
- GFX9 MCBP fixes
- SR-IOV fixes
- GPUVM clear mappings fix for always valid BOs
- Add FAMS quirk for problematic monitor
- Fix possible UAF
- Better handle monentary temperature fluctuations
- SDMA 4.4.2 fixes
- Fencing fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230630175757.8128-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Allow DC states along with PW2 only for PWB functionality [adlp+] (Imre Deak)
- Fix SSC selection for MPLLA [mtl] (Radhakrishna Sripada)
- Use hw.adjusted mode when calculating io/fast wake times [psr] (Jouni Högander)
- Apply min softlimit correctly [guc/slpc] (Vinay Belgaumkar)
- Assign correct hdcp content type [hdcp] (Suraj Kandpal)
- Add missing forward declarations/includes to display power headers (Imre Deak)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZJ1WpY+GF9NcsWXp@tursulin-desk
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Alexander Gordeev:
- Fix virtual vs physical address confusion in vmem_add_range() and
vmem_remove_range() functions
- Include <linux/io.h> instead of <asm/io.h> and <asm-generic/io.h>
throughout s390 code
- Make all PSW related defines also available for assembler files.
Remove PSW_DEFAULT_KEY define from uapi for that
- When adding an undefined symbol the build still succeeds, but
userspace crashes trying to execute VDSO, because the symbol is not
resolved. Add undefined symbols check to prevent that
- Use kvmalloc_array() instead of kzalloc() for allocaton of 256k
memory when executing s390 crypto adapter IOCTL
- Add -fPIE flag to prevent decompressor misaligned symbol build error
with clang
- Use .balign instead of .align everywhere. This is a no-op for s390,
but with this there no mix in using .align and .balign anymore
- Filter out -mno-pic-data-is-text-relative flag when compiling kernel
to prevent VDSO build error
- Rework entering of DAT-on mode on CPU restart to use PSW_KERNEL_BITS
mask directly
- Do not retry administrative requests to some s390 crypto cards, since
the firmware assumes replay attacks
- Remove most of the debug code, which is build in when kernel config
option CONFIG_ZCRYPT_DEBUG is enabled
- Remove CONFIG_ZCRYPT_MULTIDEVNODES kernel config option and switch
off the multiple devices support for the s390 zcrypt device driver
- With the conversion to generic entry machine checks are accounted to
the current context instead of irq time. As result, the STCKF
instruction at the beginning of the machine check handler and the
lowcore member are no longer required, therefore remove it
- Fix various typos found with codespell
- Minor cleanups to CPU-measurement Counter and Sampling Facilities
code
- Revert patch that removes VMEM_MAX_PHYS macro, since it causes a
regression
* tag 's390-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (25 commits)
Revert "s390/mm: get rid of VMEM_MAX_PHYS macro"
s390/cpum_sf: remove check on CPU being online
s390/cpum_sf: handle casts consistently
s390/cpum_sf: remove unnecessary debug statement
s390/cpum_sf: remove parameter in call to pr_err
s390/cpum_sf: simplify function setup_pmu_cpu
s390/cpum_cf: remove unneeded debug statements
s390/entry: remove mcck clock
s390: fix various typos
s390/zcrypt: remove ZCRYPT_MULTIDEVNODES kernel config option
s390/zcrypt: do not retry administrative requests
s390/zcrypt: cleanup some debug code
s390/entry: rework entering DAT-on mode on CPU restart
s390/mm: fence off VM macros from asm and linker
s390: include linux/io.h instead of asm/io.h
s390/ptrace: make all psw related defines also available for asm
s390/ptrace: remove PSW_DEFAULT_KEY from uapi
s390/vdso: filter out mno-pic-data-is-text-relative cflag
s390: consistently use .balign instead of .align
s390/decompressor: fix misaligned symbol build error
...
|
|
Fix the following build error.
Error log:
drivers/i2c/busses/i2c-mpc.c: In function 'mpc_i2c_setup_512x':
drivers/i2c/busses/i2c-mpc.c:310:20: error: unused variable 'pval'
Fixes: 9d178e00583e ("i2c: mpc: Use of_property_read_reg() to parse "reg"")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Since commit 235602146ec9 ("i2c-nomadik: turn the platform driver to an amba
driver"), there is no more request_mem_region() call in this driver.
So remove the release_mem_region() call from the remove function which is
likely a left over.
Fixes: 235602146ec9 ("i2c-nomadik: turn the platform driver to an amba driver")
Cc: <stable@vger.kernel.org> # v3.6+
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
In xiic_process, it is possible that error events such as arbitration
lost or TX error can be raised in conjunction with other interrupt flags
such as TX FIFO empty or bus not busy. Error events result in the
controller being reset and the error returned to the calling request,
but the function could potentially try to keep handling the other
events, such as by writing more messages into the TX FIFO. Since the
transaction has already failed, this is not helpful and will just cause
issues.
This problem has been present ever since:
commit 7f9906bd7f72 ("i2c: xiic: Service all interrupts in isr")
which allowed non-error events to be handled after errors, but became
more obvious after:
commit 743e227a8959 ("i2c: xiic: Defer xiic_wakeup() and
__xiic_start_xfer() in xiic_process()")
which reworked the code to add a WARN_ON which triggers if both the
xfer_more and wakeup_req flags were set, since this combination is
not supposed to happen, but was occurring in this scenario.
Skip further interrupt handling after error flags are detected to avoid
this problem.
Fixes: 7f9906bd7f72 ("i2c: xiic: Service all interrupts in isr")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306141934.UKmM9bFX-lkp@intel.com/
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
Currently the permstables of the shared dfas are not shared, and need
to be allocated and copied. In the future this should be addressed
with a larger rework on dfa and pdb ref counts and structure sharing.
BugLink: http://bugs.launchpad.net/bugs/2017903
Fixes: 217af7e2f4de ("apparmor: refactor profile rules and attachments")
Cc: stable@vger.kernel.org
Signed-off-by: John Johansen <john.johansen@canonical.com>
Reviewed-by: Jon Tourville <jontourville@me.com>
|
|
The transition table size was not being set by compat mappings
resulting in the profile verification code not being run. Unfortunately
the checks were also buggy not being correctly updated from the old
accept perms, to the new layout.
Also indicate to userspace that the kernel has the permstable verification
fixes.
BugLink: http://bugs.launchpad.net/bugs/2017903
Fixes: 670f31774ab6 ("apparmor: verify permission table indexes")
Signed-off-by: John Johansen <john.johansen@canonical.com>
Reviewed-by: Jon Tourville <jontourville@me.com>
|
|
If the extended permission table is present we should not be attempting
to do a compat_permission remap as the compat_permissions are not
stored in the dfa accept states.
Fixes: fd1b2b95a211 ("apparmor: add the ability for policy to specify a permission table")
Signed-off-by: John Johansen <john.johansen@canonical.com>
Reviewed-by: Jon Tourville <jontourville@me.com>
|
|
In the ongoing effort to convert all fake flexible arrays to proper
flexible arrays, replace aa_buffer's 1-element "buffer" member with a
flexible array.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
Add check for failure to allocate the permission table.
Fixes: caa9f579ca72 ("apparmor: isolate policy backwards compatibility to its own file")
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
rhashtable_insert_fast() could return err value when memory allocation is
failed. but unpack_profile() do not check values and this always returns
success value. This patch just adds error check code.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: e025be0f26d5 ("apparmor: support querying extended trusted helper extra data")
Signed-off-by: Danila Chernetsov <listdansp@mail.ru>
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
1. Return directly after a call of the function “kzalloc” failed
at the beginning in these function implementations.
2. Omit extra initialisations (for a few local variables)
which became unnecessary with this refactoring.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
Make the description of @table to @strs in function unpack_trans_table()
to silence the warnings:
security/apparmor/policy_unpack.c:456: warning: Function parameter or member 'strs' not described in 'unpack_trans_table'
security/apparmor/policy_unpack.c:456: warning: Excess function parameter 'table' description in 'unpack_trans_table'
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4332
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
Replace the use of strcpy() in build_aa_ext_struct() in
policy_unpack_test.c with strscpy().
strscpy() is the safer method to use to ensure the buffer does not
overflow. This was found by kernel test robot:
https://lore.kernel.org/all/202301040348.NbfVsXO0-lkp@intel.com/.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Rae Moar <rmoar@google.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
These cleanups came up as part of the discussion on the "riscv: Reduce
ARCH_KMALLOC_MINALIGN to 8" patch set, but that needs additional work
and thus will be delayed at least a cycle.
* b4-shazam-merge:
riscv: mm: mark noncoherent_supported as __ro_after_init
riscv: mm: mark CBO relate initialization funcs as __init
riscv: errata: thead: only set cbom size & noncoherent during boot
Link: https://lore.kernel.org/linux-riscv/20230526165958.908-1-jszhang@kernel.org/
Link: https://lore.kernel.org/r/20230614165504.532-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The noncoherent_supported indicates whether the HW is coherent or not,
it won't change after booting, mark it as __ro_after_init.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230614165504.532-4-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The two functions cbo_get_block_size() and riscv_init_cbo_blocksizes()
are only called during booting, mark them as __init.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230614165504.532-3-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The CBOM size and whether the HW is noncoherent is known and
determined during booting and won't change after that.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230614165504.532-2-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
This allocates the VM flag needed to support the userfaultfd minor fault
functionality. Because the flag bit is >= bit 32, it can only be enabled
for 64-bit kernels. See commit 7677f7fd8be7 ("userfaultfd: add minor
fault registration mode") for more information.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20230624060321.3401504-1-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
We've had a ton of issues around the ISA string parsing rules elsewhere
in RISC-V, so let's at least be clear about what the rules are so we can
try and avoid more issues.
Link: https://lore.kernel.org/r/CAK9=C2Vy-4V9kgnga98tiC3TeHkR2LFPakyBbS8s_h3_Z=ieyQ@mail.gmail.com/
Link: https://lore.kernel.org/r/20230629031705.15575-1-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Merge additional ACPI device enumeration code changes for 6.5-rc1.
- Make acpi_companion_match() return a const pointer and update its
callers accordingly (Andy Shevchenko).
- Move the extern declaration of the acpi_root variable to a header
file so as to address a compiler warning (Andy Shevchenko).
- Address compiler warnings in the ACPI device enumeration code by
adding a missing header file include to it (Ben Dooks).
- Refine the SMB0001 quirk in the ACPI device enumeration code so as to
address an i2c-scmi driver regression (Andy Shevchenko).
- Clean up two pieces of the ACPI device enumeration code (Andy
Shevchenko).
* acpi-bus:
ACPI: bus: Constify acpi_companion_match() returned value
* acpi-scan:
ACPI: scan: Use the acpi_match_acpi_device() helper
ACPI: platform: Move SMB0001 HID to the header and reuse
ACPI: platform: Ignore SMB0001 only when it has resources
ACPI: bus: Introduce acpi_match_acpi_device() helper
ACPI: scan: fix undeclared variable warnings by including sleep.h
ACPI: scan: Move acpi_root to internal header
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"These are cleanups for architecture specific header files:
- the comments in include/linux/syscalls.h have gone out of sync and
are really pointless, so these get removed
- The asm/bitsperlong.h header no longer needs to be architecture
specific on modern compilers, so use a generic version for newer
architectures that use new enough userspace compilers
- A cleanup for virt_to_pfn/virt_to_bus to have proper type checking,
forcing the use of pointers"
* tag 'asm-generic-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
syscalls: Remove file path comments from headers
tools arch: Remove uapi bitsperlong.h of hexagon and microblaze
asm-generic: Unify uapi bitsperlong.h for arm64, riscv and loongarch
m68k/mm: Make pfn accessors static inlines
arm64: memory: Make virt_to_pfn() a static inline
ARM: mm: Make virt_to_pfn() a static inline
asm-generic/page.h: Make pfn accessors static inlines
xen/netback: Pass (void *) to virt_to_page()
netfs: Pass a pointer to virt_to_page()
cifs: Pass a pointer to virt_to_page() in cifsglob
cifs: Pass a pointer to virt_to_page()
riscv: mm: init: Pass a pointer to virt_to_page()
ARC: init: Pass a pointer to virt_to_pfn() in init
m68k: Pass a pointer to virt_to_pfn() virt_to_page()
fs/proc/kcore.c: Pass a pointer to virt_addr_valid()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"There are three small fixes that came up sincie the past week:
- an incorrect bit offset in ixp4xx bus driver
- a riscv randconfig regression in the thead platform I merged
- whitespace fixes for some dts files"
* tag 'soc-fixes-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
bus: ixp4xx: fix IXP4XX_EXP_T1_MASK
ARM: dts: st: add missing space before {
RISC-V: make ARCH_THEAD preclude XIP_KERNEL
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New support:
- TI J721S2 CSI BCDMA support
Updates:
- Native HDMI support for dw edma driver
- ste dma40 updates for supporting proper SRAM handle in DT
- removal of dma device chancnt setting in drivers"
* tag 'dmaengine-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (28 commits)
dmaengine: sprd: Don't set chancnt
dmaengine: hidma: Don't set chancnt
dmaengine: plx_dma: Don't set chancnt
dmaengine: axi-dmac: Don't set chancnt
dmaengine: dw-axi-dmac: Don't set chancnt
dmaengine: qcom: bam_dma: allow omitting num-{channels,ees}
dmaengine: dw-edma: Add HDMA DebugFS support
dmaengine: dw-edma: Add support for native HDMA
dmaengine: dw-edma: Create a new dw_edma_core_ops structure to abstract controller operation
dmaengine: dw-edma: Rename dw_edma_core_ops structure to dw_edma_plat_ops
dmaengine: ste_dma40: use proper format string for resource_size_t
dmaengine: make QCOM_HIDMA depend on HAS_IOMEM
dmaengine: ste_dma40: fix typo in enum documentation
dmaengine: ste_dma40: use correct print specfier for resource_size_t
MAINTAINERS: Add myself as the DW eDMA driver reviewer
MAINTAINERS: Add Manivannan to DW eDMA driver maintainers list
MAINTAINERS: Demote Gustavo Pimentel to DW EDMA driver reviewer
dmaengine: ti: k3-udma: Add support for J721S2 CSI BCDMA instance
dt-bindings: dma: ti: Add J721S2 BCDMA
dmaengine: ti: k3-psil-j721s2: Add PSI-L thread map for main CPSW2G
...
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- add Xilinx Versal watchdog
- support Hygon FCH/SCH (Server Controller Hub)
- convert GPL notices to SPDX identifiers
- other improvements
* tag 'linux-watchdog-6.5-rc1' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: sp5100_tco: support Hygon FCH/SCH (Server Controller Hub)
dt-bindings: watchdog: restrict node name suffixes
MAINTAINERS: Add support for Xilinx versal watchdog
watchdog: xilinx_wwdt: Add Versal window watchdog support
dt-bindings: watchdog: xlnx,versal-wwdt: Add versal watchdog
watchdog: ziirave_wdt: Switch i2c driver back to use .probe()
watchdog: ibmasr: Replace GPL license notice with SPDX identifier
watchdog: Convert GPL 2.0 notice to SPDX identifier
watchdog: loongson1_wdt: Add DT support
|
|
snd_jack_report() is supposed to be callable from an IRQ context, too,
and it's indeed used in that way from virtsnd driver. The fix for
input_dev race in commit 1b6a6fc5280e ("ALSA: jack: Access input_dev
under mutex"), however, introduced a mutex lock in snd_jack_report(),
and this resulted in a potential sleep-in-atomic.
For addressing that problem, this patch changes the relevant code to
use the object get/put and removes the mutex usage. That is,
snd_jack_report(), it takes input_get_device() and leaves with
input_put_device() for assuring the input_dev being assigned.
Although the whole mutex could be reduced, we keep it because it can
be still a protection for potential races between creation and
deletion.
Fixes: 1b6a6fc5280e ("ALSA: jack: Access input_dev under mutex")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/cf95f7fe-a748-4990-8378-000491b40329@moroto.mountain
Tested-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230706155357.3470-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Merge series from Johan Hovold <johan+linaro@kernel.org>:
I've been hitting a race during boot which breaks probe of the sound
card on the Lenovo ThinkPad X13s as I've previously reported here:
https://lore.kernel.org/all/ZIHMMFtuDtvdpFAZ@hovoldconsulting.com/
The immediate issue appeared to be a probe deferral that was turned into
a hard failure, but addressing that in itself only made things worse as
it exposed further bugs.
I was hoping someone more familiar with the code in question would look
into this, but as this affects users of the X13s and breaks audio on my
machine every fifth boot or so, I decided to investigate it myself.
As expected, the Qualcomm codec drivers are broken and specifically leak
resources on component remove, which in turn breaks sound card probe
deferrals.
The source of the deferral itself appears to be legitimate and was
simply due to some audio component not yet having been registered due to
random changes in timing during boot.
These issues can most easily be reproduced by simply blacklisting the
q6apm_dai module and loading it manually after boot.
Included are also two patches that suppresses error messages on
component probe deferral to avoid spamming the logs during boot.
|
|
If CONFIG_SND_SOC_WCD934X=y, CONFIG_COMPILE_TEST=y,
CONFIG_MFD_WCD934X=n, CONFIG_REGMAP_IRQ=n:
aarch64-linux-gnu-ld: sound/soc/codecs/wcd934x.o: in function `wcd934x_codec_probe':
wcd934x.c:(.text+0x33cc): undefined reference to `regmap_irq_get_virq'
aarch64-linux-gnu-ld: sound/soc/codecs/wcd934x.o: in function `wcd934x_comp_probe':
wcd934x.c:(.text+0x4cb0): undefined reference to `regmap_irq_get_virq'
aarch64-linux-gnu-ld: wcd934x.c:(.text+0x4cc0): undefined reference to `regmap_irq_get_virq'
aarch64-linux-gnu-ld: wcd934x.c:(.text+0x4cd0): undefined reference to `regmap_irq_get_virq'
aarch64-linux-gnu-ld: wcd934x.c:(.text+0x4ce0): undefined reference to `regmap_irq_get_virq'
aarch64-linux-gnu-ld: sound/soc/codecs/wcd934x.o:wcd934x.c:(.text+0x4cf0): more undefined references to `regmap_irq_get_virq' follow
Fix this by making SND_SOC_WCD934X select REGMAP_IRQ.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/cafd878747e7951914a7d9fea33788a4a230d1f0.1688643442.git.geert@linux-m68k.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Closing GPR port before graph close can result in un handled notifications
from DSP, this results in spam of errors from GPR driver as there is no
one to handle these notification at that point in time.
Fix this by closing GPR port after graph close is finished.
Fixes: 5477518b8a0e ("ASoC: qdsp6: audioreach: add q6apm support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230705131842.41584-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Suppress probe deferral error messages when probing link components to
avoid spamming the logs, for example, if a required component has not
yet been registered:
snd-sc8280xp sound: ASoC: failed to instantiate card -517
Note that dev_err_probe() is not used as the card can be unbound and
rebound while the underlying platform device remains bound to its
driver.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230705123018.30903-9-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Suppress probe deferral error messages when loading topologies and
creating frontend links to avoid spamming the logs when a component has
not yet been registered:
snd-sc8280xp sound: ASoC: adding FE link failed
snd-sc8280xp sound: ASoC: topology: could not load header: -517
Note that dev_err_probe() is not used as the topology component can be
probed and removed while the underlying platform device remains bound to
its driver.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230705123018.30903-8-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The MBHC resources must be released on component probe failure and
removal so can not be tied to the lifetime of the component device.
This is specifically needed to allow probe deferrals of the sound card
which otherwise fails when reprobing the codec component:
snd-sc8280xp sound: ASoC: failed to instantiate card -517
genirq: Flags mismatch irq 299. 00002001 (mbhc sw intr) vs. 00002001 (mbhc sw intr)
wcd938x_codec audio-codec: Failed to request mbhc interrupts -16
wcd938x_codec audio-codec: mbhc initialization failed
wcd938x_codec audio-codec: ASoC: error at snd_soc_component_probe on audio-codec: -16
snd-sc8280xp sound: ASoC: failed to instantiate card -16
Fixes: 0e5c9e7ff899 ("ASoC: codecs: wcd: add multi button Headset detection support")
Cc: stable@vger.kernel.org # 5.14
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230705123018.30903-7-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Make sure to release allocated MBHC resources also on component remove.
This is specifically needed to allow probe deferrals of the sound card
which otherwise fails when reprobing the codec component.
Fixes: 9fb9b1690f0b ("ASoC: codecs: wcd934x: add mbhc support")
Cc: stable@vger.kernel.org # 5.14
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230705123018.30903-6-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Make sure to release allocated resources on component probe failure and
on remove.
This is specifically needed to allow probe deferrals of the sound card
which otherwise fails when reprobing the codec component:
snd-sc8280xp sound: ASoC: failed to instantiate card -517
genirq: Flags mismatch irq 289. 00002001 (HPHR PDM WD INT) vs. 00002001 (HPHR PDM WD INT)
wcd938x_codec audio-codec: Failed to request HPHR WD interrupt (-16)
genirq: Flags mismatch irq 290. 00002001 (HPHL PDM WD INT) vs. 00002001 (HPHL PDM WD INT)
wcd938x_codec audio-codec: Failed to request HPHL WD interrupt (-16)
genirq: Flags mismatch irq 291. 00002001 (AUX PDM WD INT) vs. 00002001 (AUX PDM WD INT)
wcd938x_codec audio-codec: Failed to request Aux WD interrupt (-16)
genirq: Flags mismatch irq 292. 00002001 (mbhc sw intr) vs. 00002001 (mbhc sw intr)
wcd938x_codec audio-codec: Failed to request mbhc interrupts -16
Fixes: 8d78602aa87a ("ASoC: codecs: wcd938x: add basic driver")
Cc: stable@vger.kernel.org # 5.14
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230705123018.30903-5-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Allocation of the clash control structure may fail so add the missing
error handling to avoid dereferencing an error pointer.
Fixes: 8d78602aa87a ("ASoC: codecs: wcd938x: add basic driver")
Cc: stable@vger.kernel.org # 5.14
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230705123018.30903-4-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Propagate errors when failing to load the topology component so that
probe deferrals can be handled.
Fixes: 36ad9bf1d93d ("ASoC: qdsp6: audioreach: add topology support")
Cc: stable@vger.kernel.org # 5.17
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230705123018.30903-3-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add missing whitespace between node name/label and opening {.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
Short summary of fixes pull:
* fbdev: Fix module infos on sparc
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230629113814.GA10448@linux-uq9g
|