| Age | Commit message (Collapse) | Author |
|---|
|
This test lacks a topology diagram, making the setup not obvious.
Add one.
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The ethtool dump includes the lanes parameter only when the port is up.
Therefore, the ethtool_lanes.sh test waits for ports to come before testing
the lanes parameter.
In some cases, the test considers the port as up, but the lanes parameter
is not yet dumped although assumed to be, resulting in ethtool_lanes.sh
test failure.
To avoid that, ensure that the lanes parameter is indeed dumped by waiting
for it explicitly, before preforming the test cases.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The tests use the constant TC_HIT_TIMEOUT when waiting on the counter
values. However it does not include tc_common.sh where the counter is
specified. The test has been robust in our testing, which means the counter
is bumped quickly enough that the updated value is available already on the
first iteration. Nevertheless it's not correct. Include tc_common.sh as
appropriate.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Some log_test calls are done in a loop, and lead to the same log output.
This might prove tricky to deduplicate for automated tools. Instead, roll
the unique information from log_info to log_test, and drop the log_info.
This also leads to more compact and clearer output.
This change prompts rewording the messages so that they are not excessively
long.
Some check_err messages do not indicate what the issue actually is, so
reword them to say it's a "ping with", like is the case in some other
instances in this test.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When rx-pktsNtoM reports a range that involves very low-valued range, such
as 0-64, the calculated length of the packet will be -4, because FCS is
subtracted from the value. mausezahn then confuses the value for an option
and bails out. As a result, the test dumps many mausezahn error messages.
Instead, cap the value at 0. mausezahn will use an appropriate minimum
packet length.
Cc: Vladimir Oltean <vladimir.oltean@nxp.com>
Cc: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
$ksft_skip is used to mark selftests that have tooling issues. The fact
that LLDPad is running, but shouldn't, is one such issue. Therefore have
bail_on_lldpad() bail with $ksft_skip.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The variable should contain at least NUM_NETIFS interfaces, stored
as keys named "p$i", for i in `seq $NUM_NETIFS`.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Bodies of busywait() and slowwait() functions are almost identical. Extract
the common code into a helper, loopy_wait, and convert busywait() and
slowwait() into trivial wrappers.
Moreover, the fact that slowwait() uses seconds for units is really not
intuitive, and the comment does not help much. Instead make the unit part
of the name of the argument to further clarify what units are expected.
Cc: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Convert mt753x to provide its own phylink MAC operations, thus avoiding
the shim layer in DSA's port.c
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/E1rvIco-006bQu-Fq@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Convert lantiq_gswip to provide its own phylink MAC operations, thus
avoiding the shim layer in DSA's port.c. For lantiq_gswip, it means
we end up with a common instance of phylink MAC operations that are
shared between the different variants, rather than having duplicated
initialisers in dsa_switch_ops.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1rvIcj-006bQo-B3@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Convert qca8k to provide its own phylink MAC operations, thus
avoiding the shim layer in DSA's port.c.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/E1rvIce-006bQi-58@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Convert ar9331 to provide its own phylink MAC operations, thus
avoiding the shim layer in DSA's port.c.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/E1rvIcZ-006bQc-0W@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Convert sja1105 to provide its own phylink MAC operations, thus
avoiding the shim layer in DSA's port.c
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/E1rvIcT-006bQW-S3@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Fix a potential tracepoint crash
- Fix NFSv4 GETATTR on big-endian platforms
* tag 'nfsd-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: fix endianness issue in nfsd4_encode_fattr4
SUNRPC: Fix rpcgss_context trace event acceptor field
|
|
Jakub Kicinski says:
====================
selftests: net: exercise page pool reporting via netlink
Add a basic test for page pool netlink reporting.
v1: https://lore.kernel.org/all/20240411012815.174400-1-kuba@kernel.org/
====================
Link: https://lore.kernel.org/r/20240412141436.828666-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a Python test for the basic ops.
# ./net/nl_netdev.py
KTAP version 1
1..3
ok 1 nl_netdev.empty_check
ok 2 nl_netdev.lo_check
ok 3 nl_netdev.page_pool_check
# Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20240412141436.828666-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Using "with" on an entire driver test env is supported already,
but it's also useful to use "with" on an individual nsim.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20240412141436.828666-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of a summary line print the full exception.
This makes debugging Python tests much easier.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20240412141436.828666-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Developing Python tests is a bit annoying because when test fails
we only print the fail message and no info about which exact check
led to it. Print the location (the first line of this example is new):
# At /root/ksft-net-drv/./net/nl_netdev.py line 38:
# Check failed 0 != 10
not ok 3 nl_netdev.page_pool_check
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20240412141436.828666-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
YNL currently reports None for empty dump:
$ cli.py ...netdev.yaml --dump page-pool-get
None
This doesn't matter for the CLI but when writing YNL based tests
having to deal with either list or None is annoying. Limit the
None conversion to non-dump ops:
$ cli.py ...netdev.yaml --dump page-pool-get
[]
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240412141436.828666-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add very basic page pool use so that we can exercise
the netlink uAPI in a selftest.
Page pool gets created on open, destroyed on close.
But we control allocating of a single page thru debugfs.
This page may survive past the page pool itself so that
we can test orphaned page pools.
Link: https://lore.kernel.org/r/20240412141436.828666-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Breno Leitao says:
====================
net: dqs: optimize if stall threshold is not set
Here are four patches aimed at enhancing the Dynamic Queue Limit (DQL)
subsystem within the networking stack.
The first two commits involve code refactoring, while the third patch
introduces the actual change. The fourth patch just improves the cache
locality.
Typically, when DQL is enabled, stall information is always populated
through dql_queue_stall(). However, this information is only necessary
if a stall threshold is set, which is stored in struct dql->stall_thrs.
Although dql_queue_stall() is relatively inexpensive, it is not entirely
free due to memory barriers and similar overheads.
To optimize performance, refrain from calling dql_queue_stall() when no
stall threshold is set, thus avoiding the processing of unnecessary
information.
v1: https://lore.kernel.org/all/20240404145939.3601097-1-leitao@debian.org/
====================
Link: https://lore.kernel.org/r/20240411192241.2498631-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With the previous change, struct dqs->stall_thrs will be in the hot path
(at queue side), even if DQS is disabled.
The other fields accessed in this function (last_obj_cnt and num_queued)
are in the first cache line, let's move this field (stall_thrs) to the
very first cache line, since there is a hole there.
This does not change the structure size, since it moves an short (2
bytes) to 4-bytes whole in the first cache line.
This is the new structure format now:
struct dql {
unsigned int num_queued;
unsigned int last_obj_cnt;
...
short unsigned int stall_thrs;
/* XXX 2 bytes hole, try to pack */
...
/* --- cacheline 1 boundary (64 bytes) --- */
...
/* Longest stall detected, reported to user */
short unsigned int stall_max;
/* XXX 2 bytes hole, try to pack */
};
Also, read the stall_thrs (now in the very first cache line) earlier,
together with dql->num_queued (also in the first cache line).
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240411192241.2498631-5-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When Dynamic Queue Limit (DQL) is set, it always populate stall
information through dql_queue_stall(). However, this information is
only necessary if a stall threshold is set, stored in struct
dql->stall_thrs.
dql_queue_stall() is cheap, but not free, since it does have memory
barriers and so forth.
Do not call dql_queue_stall() if there is no stall threshold set, and
save some CPU cycles.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240411192241.2498631-4-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The dql_queued() function currently handles both queuing object counts
and populating bitmaps for reporting stalls.
This commit splits the bitmap population into a separate function,
allowing for conditional invocation in scenarios where the feature is
disabled.
This refactor maintains functionality while improving code
organization.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240411192241.2498631-3-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If the dql_queued() function receives an invalid argument, WARN about it
and continue, instead of crashing the kernel.
This was raised by checkpatch, when I am refactoring this code (see
following patch/commit)
WARNING: Do not crash the kernel unless it is absolutely unavoidable--use WARN_ON_ONCE() plus recovery code (if feasible) instead of BUG() or variants
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240411192241.2498631-2-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull yet more bcachefs fixes from Kent Overstreet:
"This gets recovery working again for the affected user I've been
working with, and I'm still waiting to hear back on other bug reports
but should fix it for everyone else who's been having issues with
recovery.
- Various recovery fixes:
- fixes for the btree_insert_entry being resized on path
allocation btree_path array recently became dynamically
resizable, and btree_insert_entry along with it; this was being
observed during journal replay, when write buffer btree updates
don't use the write buffer and instead use the normal btree
update path
- multiple fixes for deadlock in recovery when we need to do lots
of btree node merges; excessive merges were clocking up the
whole pipeline
- write buffer path now correctly does btree node merges when
needed
- fix failure to go RW when superblock indicates recovery passes
needed (i.e. to complete an unfinished upgrade)
- Various unsafety fixes - test case contributed by a user who had
two drives out of a six drive array write out a whole bunch of
garbage after power failure
- New (tiny) on disk format feature: since it appears the btree node
scan tool will be a more regular thing (crappy hardware, user
error) - this adds a 64 bit per-device bitmap of regions that have
ever had btree nodes.
- A path->should_be_locked fix, from a larger patch series tightening
up invariants and assertions around btree transaction and path
locking state.
This particular fix prevents us from keeping around btree_paths
that are no longer needed"
* tag 'bcachefs-2024-04-15' of https://evilpiepirate.org/git/bcachefs: (24 commits)
bcachefs: set_btree_iter_dontneed also clears should_be_locked
bcachefs: fix error path of __bch2_read_super()
bcachefs: Check for backpointer bucket_offset >= bucket size
bcachefs: bch_member.btree_allocated_bitmap
bcachefs: sysfs internal/trigger_journal_flush
bcachefs: Fix bch2_btree_node_fill() for !path
bcachefs: add safety checks in bch2_btree_node_fill()
bcachefs: Interior known are required to have known key types
bcachefs: add missing bounds check in __bch2_bkey_val_invalid()
bcachefs: Fix btree node merging on write buffer btrees
bcachefs: Disable merges from interior update path
bcachefs: Run merges at BCH_WATERMARK_btree
bcachefs: Fix missing write refs in fs fio paths
bcachefs: Fix deadlock in journal replay
bcachefs: Go rw if running any explicit recovery passes
bcachefs: Standardize helpers for printing enum strs with bounds checks
bcachefs: don't queue btree nodes for rewrites during scan
bcachefs: fix race in bch2_btree_node_evict()
bcachefs: fix unsafety in bch2_stripe_to_text()
bcachefs: fix unsafety in bch2_extent_ptr_to_text()
...
|
|
This is part of a larger series cleaning up the semantics of
should_be_locked and adding assertions around it; if we don't need an
iterator/path anymore, it clearly doesn't need to be locked.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
In __bch2_read_super(), if kstrdup() fails, it needs to release memory
in sb->holder, fix to call bch2_free_super() in the error path.
Signed-off-by: Chao Yu <chao@kernel.org>
Reviewed-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"A fix to kselftest harness to prevent infinite loop triggered in an
assert in FIXTURE_TEARDOWN and a fix to a problem seen in being able
to stop subsystem-enable tests when sched events are being traced"
* tag 'linux_kselftest-fixes-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/harness: Prevent infinite loop due to Assert in FIXTURE_TEARDOWN
selftests/ftrace: Limit length in subsystem-enable tests
|
|
Allow the power-domains property to the PWM_DISP block as on some SoCs
this does need at most one power domain.
Fixes: b09b179bac0a ("dt-bindings: pwm: Convert pwm-mtk-disp.txt to mediatek,pwm-disp.yaml format")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240404081808.92199-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
With 16 channel pwm support, we're registering two instances of pwm_chip
with 8 channels each. We need to update PM functions to use both instances
of pwm_chip during power state transitions.
Introduce struct dwc_pwm_drvdata and use it as driver_data, which will
maintain both instances of pwm_chip along with dwc_pwm_info and allow us
to use them inside suspend/resume handles.
Fixes: ebf2c89eb95e ("pwm: dwc: Add 16 channel support for Intel Elkhart Lake")
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240415074051.14681-1-raag.jadav@intel.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
Julien Panis says:
====================
Add minimal XDP support to TI AM65 CPSW Ethernet driver
This patch adds XDP support to TI AM65 CPSW Ethernet driver.
The following features are implemented: NETDEV_XDP_ACT_BASIC,
NETDEV_XDP_ACT_REDIRECT, and NETDEV_XDP_ACT_NDO_XMIT.
Zero-copy and non-linear XDP buffer supports are NOT implemented.
Besides, the page pool memory model is used to get better performance.
====================
Signed-off-by: Julien Panis <jpanis@baylibre.com>
|
|
This patch adds XDP (eXpress Data Path) support to TI AM65 CPSW
Ethernet driver. The following features are implemented:
- NETDEV_XDP_ACT_BASIC (XDP_PASS, XDP_TX, XDP_DROP, XDP_ABORTED)
- NETDEV_XDP_ACT_REDIRECT (XDP_REDIRECT)
- NETDEV_XDP_ACT_NDO_XMIT (ndo_xdp_xmit callback)
The page pool memory model is used to get better performance.
Below are benchmark results obtained for the receiver with iperf3 default
parameters:
- Without page pool: 495 Mbits/sec
- With page pool: 605 Mbits/sec (actually 610 Mbits/sec, with a 5 Mbits/sec
loss due to extra processing in the hot path to handle XDP).
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch introduces a member and the related accessors which can be
used to store descriptor specific additional information. This member
can store, for instance, an ID to differentiate a skb TX buffer type
from a xdpf TX buffer type.
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds accessors for desc_size and cpumem members. They may be
used, for instance, to compute a descriptor index.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We've observed a 7-12% performance regression in iperf3 UDP ipv4 and
ipv6 tests with multiple sockets on Zen3 cpus, which we traced back to
commit f0ea27e7bfe1 ("udp: re-score reuseport groups when connected
sockets are present"). The failing tests were those that would spawn
UDP sockets per-cpu on systems that have a high number of cpus.
Unsurprisingly, it is not caused by the extra re-scoring of the reused
socket, but due to the compiler no longer inlining compute_score, once
it has the extra call site in udp4_lib_lookup2. This is augmented by
the "Safe RET" mitigation for SRSO, needed in our Zen3 cpus.
We could just explicitly inline it, but compute_score() is quite a large
function, around 300b. Inlining in two sites would almost double
udp4_lib_lookup2, which is a silly thing to do just to workaround a
mitigation. Instead, this patch shuffles the code a bit to avoid the
multiple calls to compute_score. Since it is a static function used in
one spot, the compiler can safely fold it in, as it did before, without
increasing the text size.
With this patch applied I ran my original iperf3 testcases. The failing
cases all looked like this (ipv4):
iperf3 -c 127.0.0.1 --udp -4 -f K -b $R -l 8920 -t 30 -i 5 -P 64 -O 2
where $R is either 1G/10G/0 (max, unlimited). I ran 3 times each.
baseline is v6.9-rc3. harmean == harmonic mean; CV == coefficient of
variation.
ipv4:
1G 10G MAX
HARMEAN (CV) HARMEAN (CV) HARMEAN (CV)
baseline 1743852.66(0.0208) 1725933.02(0.0167) 1705203.78(0.0386)
patched 1968727.61(0.0035) 1962283.22(0.0195) 1923853.50(0.0256)
ipv6:
1G 10G MAX
HARMEAN (CV) HARMEAN (CV) HARMEAN (CV)
baseline 1729020.03(0.0028) 1691704.49(0.0243) 1692251.34(0.0083)
patched 1900422.19(0.0067) 1900968.01(0.0067) 1568532.72(0.1519)
This restores the performance we had before the change above with this
benchmark. We obviously don't expect any real impact when mitigations
are disabled, but just to be sure it also doesn't regresses:
mitigations=off ipv4:
1G 10G MAX
HARMEAN (CV) HARMEAN (CV) HARMEAN (CV)
baseline 3230279.97(0.0066) 3229320.91(0.0060) 2605693.19(0.0697)
patched 3242802.36(0.0073) 3239310.71(0.0035) 2502427.19(0.0882)
Cc: Lorenz Bauer <lmb@isovalent.com>
Fixes: f0ea27e7bfe1 ("udp: re-score reuseport groups when connected sockets are present")
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 3e2f544dd8a33 ("net: get stats64 if device if driver is
configured") moved the callback to dev_get_tstats64() to net core, so,
unless the driver is doing some custom stats collection, it does not
need to set .ndo_get_stats64.
Since this driver is now relying in NETDEV_PCPU_STAT_TSTATS, then, it
doesn't need to set the dev_get_tstats64() generic .ndo_get_stats64
function pointer.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With commit 34d21de99cea9 ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core
instead of in this driver.
With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.
Remove the allocation in the ip6_gre and leverage the network
core allocation instead.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Convert dsa_user_phylink_fixed_state() to use the newly introduced
dsa_phylink_to_port() helper.
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
AFAICS all users of net_class take a const struct class * argument.
Therefore fully constify net_class.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Upon reviewing the flower control flags handling in
this driver, I notice that the key wasn't being used,
only the mask.
Ie. `tc flower ... ip_flags nofrag` was hardware
offloaded as `... ip_flags frag`.
Only compile tested, no access to HW.
Fixes: c672e3727989 ("octeontx2-pf: Add support to filter packet based on IP fragment")
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
gve has supported software timestamp generation since its inception,
but has not advertised that support via ethtool. This patch correctly
advertises that support.
Signed-off-by: John Fraker <jfraker@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Normally, we don't face these two exceptions very often meanwhile
we have some chance to meet the condition where the current cpu id
is the same as skb->alloc_cpu.
One simple test that can help us see the frequency of this statement
'cpu == raw_smp_processor_id()':
1. running iperf -s and iperf -c [ip] -P [MAX CPU]
2. using BPF to capture skb_attempt_defer_free()
I can see around 4% chance that happens to satisfy the statement.
So moving this statement at the beginning can save some cycles in
most cases.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Asbjørn Sloth Tønnesen says:
====================
flower: validate control flags
I have reviewed the flower control flags code.
In all, but one (sfc), the flags field wasn't
checked properly for unsupported flags.
In this series I have only included a single example
user for each helper function. Once the helpers are in,
I will submit patches for all other drivers implementing
flower.
After which there will be:
- 6 drivers using flow_rule_is_supp_control_flags()
- 8 drivers using flow_rule_has_control_flags()
- 11 drivers using flow_rule_match_has_control_flags()
---
Changelog:
v3:
- Added Reviewed-by from Louis Peens (first two patches)
- Properly fixed kernel-doc format
v2: https://lore.kernel.org/netdev/20240410093235.5334-1-ast@fiberby.net/
- Squashed the 3 helper functions to one commmit (requested by Baowen Zheng)
- Renamed helper functions to avoid double negatives (suggested by Louis Peens)
- Reverse booleans in some functions and callsites to align with new names
- Fix autodoc format
v1: https://lore.kernel.org/netdev/20240408130927.78594-1-ast@fiberby.net/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add check for unsupported control flags.
Only compile-tested, no access to HW.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add check for unsupported control flags.
Only compile-tested, no access to HW.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use flow_rule_is_supp_control_flags()
Check the mask, not the key, for unsupported control flags.
Only compile-tested, no access to HW
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
These helpers aim to help drivers, with checking
for the presence of unsupported control flags.
For drivers supporting at least one control flag:
flow_rule_is_supp_control_flags()
For drivers using flow_rule_match_control(), but not using flags:
flow_rule_has_control_flags()
For drivers not using flow_rule_match_control():
flow_rule_match_has_control_flags()
While primarily aimed at FLOW_DISSECTOR_KEY_CONTROL
and flow_rule_match_control(), then the first two
can also be used with FLOW_DISSECTOR_KEY_ENC_CONTROL
and flow_rule_match_enc_control().
These helpers mirrors the existing check done in sfc:
drivers/net/ethernet/sfc/tc.c +276
Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We lock and unlock rtnl in init/exit for convenience,
but it started causing problems if the exit is handled
by a different thread. To avoid having to futz with
disabling locking assertions move the locking into
the test cases. We don't use ASSERTs so it should
be safe.
============= dev-addr-list-test (6 subtests) ==============
[PASSED] dev_addr_test_basic
[PASSED] dev_addr_test_sync_one
[PASSED] dev_addr_test_add_del
[PASSED] dev_addr_test_del_main
[PASSED] dev_addr_test_add_set
[PASSED] dev_addr_test_add_excl
=============== [PASSED] dev-addr-list-test ================
Link: https://lore.kernel.org/all/20240403131936.787234-7-linux@roeck-us.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
