summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-11-16net/cadence: enable by default NET_ATMELJean-Christophe PLAGNIOL-VILLARD
so the defconfig of the atmel continue to have the support of the network as before Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16bridge: correct IPv6 checksum after pullstephen hemminger
Bridge multicast snooping of ICMPv6 would incorrectly report a checksum problem when used with Ethernet devices like sky2 that use CHECKSUM_COMPLETE. When bytes are removed from skb, the computed checksum needs to be adjusted. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Tested-by: Martin Volf <martin.volf.42@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16qeth: Reduce CPU consumption through less SIGA-r callsEinar Lueck
Patch avoids SIGA-r calls in case of SIGA-r required. It only calls SIGA-r if a threshold of free buffer is reached. CPU consumption is reduced as a consequence. Signed-off-by: Einar Lueck <elelueck@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16qeth: l3 fix rcu splat in xmitFrank Blaschka
when use dst_get_neighbour to get neighbour, we need rcu_read_lock to protect, since dst_get_neighbour uses rcu_dereference. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16netiucv: reinsert dev_alloc_name for device namingUrsula Braun
Invocation of dev_alloc_name() is re-inserted, because the created net_device name is used to create the device name for the iucv bus. This device is created before the register_netdev call. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16qeth: remove WARN_ON leftoverChristian Borntraeger
The patch "qeth: exploit asynchronous delivery of storage blocks" added a WARN_ON in qeth_schedule_recovery. A device recovery should not cause a kernel warning. This is obviously a debugging left-over that we forgot to remove. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16qeth: return with -EPERM if sniffing is not enabledUrsula Braun
Without appropriate configuration at the SE, a HiperSockets device cannot be used for sniffing. Setting the sniffer attribute is rejected with -EPERM. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16tcp: clear xmit timers in tcp_v4_syn_recv_sock()Eric Dumazet
Simon Kirby reported divides by zero errors in __tcp_select_window() This happens when inet_csk_route_child_sock() returns a NULL pointer : We free new socket while we eventually armed keepalive timer in tcp_create_openreq_child() Fix this by a call to tcp_clear_xmit_timers() [ This is a followup to commit 918eb39962dff (net: add missing bh_unlock_sock() calls) ] Reported-by: Simon Kirby <sim@hostway.ca> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Tested-by: Simon Kirby <sim@hostway.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16switch create_mnt_ns() to saner calling conventions, fix double mntput() in nfsAl Viro
Life is much saner if create_mnt_ns(mnt) drops mnt in case of error... Switch it to such calling conventions, switch callers, fix double mntput() in fs/nfs/super.c one. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-11-16btrfs: fix double mntput() in mount_subvol()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-11-16encrypted-keys: module build fixesMimi Zohar
Encrypted keys are encrypted/decrypted using either a trusted or user-defined key type, which is referred to as the 'master' key. The master key may be of type trusted iff the trusted key is builtin or both the trusted key and encrypted keys are built as modules. This patch resolves the build dependency problem. - Use "masterkey-$(CONFIG_TRUSTED_KEYS)-$(CONFIG_ENCRYPTED_KEYS)" construct to encapsulate the above logic. (Suggested by Dimtry Kasatkin.) - Fixing the encrypted-keys Makefile, results in a module name change from encrypted.ko to encrypted-keys.ko. - Add module dependency for request_trusted_key() definition Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
2011-11-16encrypted-keys: fix error return codeMimi Zohar
Fix request_master_key() error return code. Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
2011-11-16xen-gntalloc: signedness bug in add_grefs()Dan Carpenter
gref->gref_id is unsigned so the error handling didn't work. gnttab_grant_foreign_access() returns an int type, so we can add a cast here, and it doesn't cause any problems. gnttab_grant_foreign_access() can return a variety of errors including -ENOSPC, -ENOSYS and -ENOMEM. CC: stable@kernel.org Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-11-16xen-gntalloc: integer overflow in gntalloc_ioctl_alloc()Dan Carpenter
On 32 bit systems a high value of op.count could lead to an integer overflow in the kzalloc() and gref_ids would be smaller than expected. If the you triggered another integer overflow in "if (gref_size + op.count > limit)" then you'd probably get memory corruption inside add_grefs(). CC: stable@kernel.org Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-11-16xen-gntdev: integer overflow in gntdev_alloc_map()Dan Carpenter
The multiplications here can overflow resulting in smaller buffer sizes than expected. "count" comes from a copy_from_user(). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-11-16xen:pvhvm: enable PVHVM VCPU placement when using more than 32 CPUs.Zhenzhong Duan
PVHVM running with more than 32 vcpus and pv_irq/pv_time enabled need VCPU placement to work, or else it will softlockup. CC: stable@kernel.org Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-11-16xen/balloon: Avoid OOM when requesting highmemDaniel De Graaf
If highmem pages are requested from the balloon on a system without highmem, the implementation of alloc_xenballooned_pages will allocate all available memory trying to find highmem pages to return. Allow low memory to be returned when highmem pages are requested to avoid this loop. Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-11-16xen: Remove hanging references to CONFIG_XEN_PLATFORM_PCIDaniel De Graaf
In 5fbdc10395cd500d6ff844825a918c4e6f38de37 the XEN_PLATFORM_PCI config option was removed, but references in header files remained. Clean up those references. Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-11-16xen: map foreign pages for shared rings by updating the PTEs directlyDavid Vrabel
When mapping a foreign page with xenbus_map_ring_valloc() with the GNTTABOP_map_grant_ref hypercall, set the GNTMAP_contains_pte flag and pass a pointer to the PTE (in init_mm). After the page is mapped, the usual fault mechanism can be used to update additional MMs. This allows the vmalloc_sync_all() to be removed from alloc_vm_area(). Signed-off-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> [v1: Squashed fix by Michal for no-mmu case] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-11-16ALSA: hda - Fix the connection selection of ADCs on Cirrus codecsTakashi Iwai
spec->cur_adc isn't set until cs_capture_pcm_prepare() is called although the driver tries to select the connection at init time and at auto-mic switch. This results in the access to the widget NID 0, which is obviously invalid, also a wrong capture source. This patch fixes the issue by issuing the connect-select verb conditionally at appropriate places. Reported-and-tested-by: Dylan Reid <dgreid@chromium.org> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-16ALSA: hda - Update URLs in documentTakashi Iwai
Some stuff was moved from kernel.org to other places. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-16ALSA: hda - move eld->spk_alloc fixup to hdmi_update_eld()Wu Fengguang
It looks more natural and saves two lines of code. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-16ALSA: hda - delayed ELD repollWu Fengguang
The Intel HDMI chips (ironlake at least) are found to have ~250ms delay between the ELD_Valid=1 hotplug event is send and the ELD buffer becomes actually readable. During the time the ELD buffer is mysteriously all 0. Fix it by scheduling a delayed work to re-read ELD buffer after 300ms. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-16ALSA: hda - fix ELD memory leakWu Fengguang
memset(eld) clears eld->proc_entry which will leak the struct snd_info_entry when unloading module. Fix it by - memset only the fields before eld->eld_buffer - set eld->eld_valid to true _after_ all eld fields have been filled Cc: <stable@kernel.org> Cc: Pierre-louis Bossart <pierre-louis.bossart@intel.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-16Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] topology: fix topology on z10 machines [S390] crypto: avoid MSA3 and MSA4 instructions in ESA mode [S390] avoid STCKF if running in ESA mode [S390] zfcpdump: Do not initialize zfcpdump in kdump mode [S390] ap: Setup processing for messages in request queue. [S390] Kconfig: Select CONFIG_KEXEC for CONFIG_CRASH_DUMP [S390] incorrect note program header [S390] pfault: ignore leftover completion interrupts [S390] fix pgste update logic [S390] wire up process_vm syscalls
2011-11-16block: add missed trace_block_plugShaohua Li
After flush plug list, the list has no request, so we need to add a trace_block_plug(). Signed-off-by: Shaohua Li <shaohua.li@intel.com> Reviewed-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-11-16paride: fix potential information leak in pg_read()Dan Carpenter
Smatch has a new check for Rosenberg type information leaks where structs are copied to the user with uninitialized stack data in them. i In this case, the pg_write_hdr struct has a hole in it. struct pg_write_hdr { char magic; /* 0 1 */ char func; /* 1 1 */ /* XXX 2 bytes hole, try to pack */ int dlen; /* 4 4 */ Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Tim Waugh <tim@cyberelk.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-11-16bio: change some signed vars to unsignedDan Carpenter
This is just a cleanup patch to silence a static checker warning. The problem is that we cap "nr_iovecs" so it can't be larger than "UIO_MAXIOV" but we don't check for negative values. It turns out this is prevented at other layers, but logically it doesn't make sense to have negative nr_iovecs so making it unsigned is nicer. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-11-16block: avoid unnecessary plug list flushShaohua Li
get_request_wait() could sleep and flush the plug list. If the list is already flushed, don't flush again. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Reviewed-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-11-16cciss: auto engage SCSI mid layer at driver load timeStephen M. Cameron
A long time ago, probably in 2002, one of the distros, or maybe more than one, loaded block drivers prior to loading the SCSI mid layer. This meant that the cciss driver, being a block driver, could not engage the SCSI mid layer at init time without panicking, and relied on being poked by a userland program after the system was up (and the SCSI mid layer was therefore present) to engage the SCSI mid layer. This is no longer the case, and cciss can safely rely on the SCSI mid layer being present at init time and engage the SCSI mid layer straight away. This means that users will see their tape drives and medium changers at driver load time without need for a script in /etc/rc.d that does this: for x in /proc/driver/cciss/cciss* do echo "engage scsi" > $x done However, if no tape drives or medium changers are detected, the SCSI mid layer will not be engaged. If a tape drive or medium change is later hot-added to the system it will then be necessary to use the above script or similar for the device(s) to be acceesible. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-11-16loop: cleanup set_status interfaceDmitry Monakhov
1) Anyone who has read access to loopdev has permission to call set_status and may change important parameters such as lo_offset, lo_sizelimit and so on, which contradicts to read access pattern and definitely equals to write access pattern. 2) Add lo_offset over i_size check to prevent blkdev_size overflow. ##Testcase_bagin #dd if=/dev/zero of=./file bs=1k count=1 #losetup /dev/loop0 ./file /* userspace_application */ struct loop_info64 loinf; fd = open("/dev/loop0", O_RDONLY); ioctl(fd, LOOP_GET_STATUS64, &loinf); /* Set offset to any value which is bigger than i_size, and sizelimit * to nonzero value*/ loinf.lo_offset = 4096*1024; loinf.lo_sizelimit = 1024; ioctl(fd, LOOP_SET_STATUS64, &loinf); /* After this loop device will have size similar to 0x7fffffffffxxxx */ #blockdev --getsz /dev/loop0 ##OUTPUT: 36028797018955968 ##Testcase_end [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-11-16include/linux/bio.h: use a static inline function for bio_integrity_clone()Stephen Rothwell
When CONFIG_BLK_DEV_INTEGRITY is not set, we get these warnings: drivers/md/dm.c: In function 'split_bvec': drivers/md/dm.c:1061:3: warning: statement with no effect drivers/md/dm.c: In function 'clone_bio': drivers/md/dm.c:1088:3: warning: statement with no effect Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-11-16loop: prevent information leak after failed readDmitry Monakhov
If read was not fully successful we have to fail whole bio to prevent information leak of old pages ##Testcase_begin dd if=/dev/zero of=./file bs=1M count=1 losetup /dev/loop0 ./file -o 4096 truncate -s 0 ./file # OOps loop offset is now beyond i_size, so read will silently fail. # So bio's pages would not be cleared, may which result in information leak. hexdump -C /dev/loop0 ##testcase_end Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-11-16powerpc/ps3: Fix SMP lockdep boot warningGeoff Levand
Move the PS3 IPI message setup from ps3_smp_setup_cpu() to ps3_smp_probe(). Fixes startup warnings like these: ------------[ cut here ]------------ WARNING: at kernel/lockdep.c:2649 Modules linked in: ... ---[ end trace 31fd0ba7d8756001 ]--- Signed-off-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-11-16powerpc/ps3: Fix lost SMP IPIsGeoff Levand
Fixes the PS3 bootup hang introduced in 3.0-rc1 by: commit 317f394160e9beb97d19a84c39b7e5eb3d7815a sched: Move the second half of ttwu() to the remote cpu Move the PS3's LV1 EOI call lv1_end_of_interrupt_ext() from ps3_chip_eoi() to ps3_get_irq() for IPI messages. If lv1_send_event_locally() is called between a previous call to lv1_send_event_locally() and the coresponding call to lv1_end_of_interrupt_ext() the second event will not be delivered to the target cpu. The PS3's SMP IPIs are implemented using lv1_send_event_locally(), so if two IPI messages of the same type are sent to the same target in a relatively short period of time the second IPI event can become lost when lv1_end_of_interrupt_ext() is called from ps3_chip_eoi(). CC: stable@kernel.org Signed-off-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-11-16powerpc: Add hvcall.h include to book3s_hv.cMichael Neuling
If you build with KVM and UP it fails with the following due to a missing include. /arch/powerpc/kvm/book3s_hv.c: In function 'do_h_register_vpa': arch/powerpc/kvm/book3s_hv.c:156:10: error: 'H_PARAMETER' undeclared (first use in this function) arch/powerpc/kvm/book3s_hv.c:156:10: note: each undeclared identifier is reported only once for each function it appears in arch/powerpc/kvm/book3s_hv.c:192:12: error: 'H_RESOURCE' undeclared (first use in this function) arch/powerpc/kvm/book3s_hv.c:222:9: error: 'H_SUCCESS' undeclared (first use in this function) arch/powerpc/kvm/book3s_hv.c: In function 'kvmppc_pseries_do_hcall': arch/powerpc/kvm/book3s_hv.c:228:30: error: 'H_SUCCESS' undeclared (first use in this function) arch/powerpc/kvm/book3s_hv.c:232:7: error: 'H_CEDE' undeclared (first use in this function) arch/powerpc/kvm/book3s_hv.c:234:7: error: 'H_PROD' undeclared (first use in this function) arch/powerpc/kvm/book3s_hv.c:238:10: error: 'H_PARAMETER' undeclared (first use in this function) arch/powerpc/kvm/book3s_hv.c:250:7: error: 'H_CONFER' undeclared (first use in this function) arch/powerpc/kvm/book3s_hv.c:252:7: error: 'H_REGISTER_VPA' undeclared (first use in this function) make[2]: *** [arch/powerpc/kvm/book3s_hv.o] Error 1 Signed-off-by: Michael Neuling <mikey@neuling.org> cc: stable@kernel.org (3.1 only) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-11-16powerpc/trace: Add a dummy stack frame for trace_hardirqs_offKevin Hao
The trace_hardirqs_off will use CALLER_ADDR0 and CALLER_ADDR1. If an exception occurs in user mode, there is only one stack frame on the stack and accessing the CALLER_ADDR1 will causes the following call trace. So we create a dummy stack frame to make trace_hardirqs_off happy. WARNING: at kernel/smp.c:459 Modules linked in: NIP: c0093280 LR: c00930a0 CTR: c0010780 REGS: edb87ae0 TRAP: 0700 Not tainted (3.1.0) MSR: 00021002 <ME,CE> CR: 28002888 XER: 00000000 TASK = edce2ac0[17658] 'mthread-lock-on' THREAD: edb86000 CPU: 5 GPR00: 00000001 edb87b90 edce2ac0 00000005 c0019594 edb87bd8 00000001 00000fe3 GPR08: 00041000 c084138c 4e20120d edb87b90 48002888 1001aa7c 00000000 00000000 GPR16: 48830000 10012a8c 00000000 10000af4 00000001 c0810000 00000000 00000000 GPR24: ee9aa920 c0816a18 00000000 00000005 c0019594 edb87bd8 ee20178c edb87b90 NIP [c0093280] smp_call_function_many+0x214/0x2b4 LR [c00930a0] smp_call_function_many+0x34/0x2b4 Call Trace: [edb87b90] [c00930a0] smp_call_function_many+0x34/0x2b4 (unreliable) [edb87bd0] [c00194ec] __flush_tlb_page+0xac/0x100 [edb87c00] [c001957c] flush_tlb_page+0x3c/0x54 [edb87c10] [c00180ac] ptep_set_access_flags+0x74/0x12c [edb87c40] [c0128068] handle_pte_fault+0x2f0/0x9ac [edb87cb0] [c0128c3c] handle_mm_fault+0x104/0x1dc [edb87ce0] [c05f40f4] do_page_fault+0x2dc/0x630 [edb87e50] [c001078c] handle_page_fault+0xc/0x80 Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-11-16powerpc: Copy down exception vectors after feature fixupsAnton Blanchard
kdump fails because we try to execute an HV only instruction. Feature fixups are being applied after we copy the exception vectors down to 0 so they miss out on any updates. We have always had this issue but it only became critical in v3.0 when we added CFAR support (breaks POWER5) and v3.1 when we added POWERNV (breaks everyone). Signed-off-by: Anton Blanchard <anton@samba.org> Cc: <stable@kernel.org> [v3.0+] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-11-16powerpc: panic if we can't instantiate RTASAnton Blanchard
I had to debug a strange situation where all manner of things were failing. SMT threads, storage and network were all completely broken. The root cause was we couldn't find enough memory to instantiate RTAS - this was a network install so the initrd was huge. Instead of limping along and failing in mysterious ways we should just panic up front if RTAS exists and we can't allocate space for it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-11-16powerpc/4xx: Fix typos in kexec config dependenciesSuzuki Poulose
Kexec is not supported on 47x. 47x is a variant of 44x with slightly different MMU and SMP support. There was a typo in the config dependency for kexec. This patch fixes the same. Signed-off-by: Suzuki K. Poulose <suzuki@in.ibm.com> Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linux ppc dev <linuxppc-dev@lists.ozlabs.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-11-16powerpc/fsl: MCU_MPC8349EMITX wants I2C built-in, modular won't do...Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-11-16powerpc/fsl_udc_core: Fix dumb typoAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-11-16carma-fpga: Missed switch from of_register_platform_driver()Al Viro
... by 6 months Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-11-16powerpc: Fix build breakage in jump_label.cAl Viro
Should do what other architectures do and wrap all that code into the appropriate ifdef Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-11-16unicore32, exec: remove redundant set_fs(USER_DS)Mathias Krause
The address limit is already set in flush_old_exec() so this set_fs(USER_DS) is redundant. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
2011-11-16unicore32: Fix typo 'PUV3_I2C'Paul Bolle
Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
2011-11-15Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: lantiq: use export.h in favour of module.h MAINTAINERS: The MIPS git tree has moved. MIPS: Fix build error due to missing inclusion of <linux/export.h>. MIPS: ASID conflict after CPU hotplug MIPS: Octeon: Fix compile error in arch/mips/cavium-octeon/flash_setup.c MIPS: errloongson2_clock: Fix build error by including linux/module.h STAGING: octeon-ethernet: Fix compile error caused by skb_frag_struct change MIPS: Hook up process_vm_readv and process_vm_writev system calls. MIPS: Kernel hangs occasionally during boot. MIPS: Octeon: Mark SMP-IPI interrupt as IRQF_NO_THREAD MIPS: BCM47xx: fix build with GENERIC_GPIO configuration MIPS: NXP: Remove unused source files. MIPS: Yosemite, Emma: Fix off-by-two in arcs_cmdline buffer size check
2011-11-15Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon/kms: fix segfault in pm rework drm/radeon/kms: fix up gpio i2c mask bits for r4xx drm/radeon: add some missing FireMV pci ids vgaarb: a NULL bridge is acceptable for root devices. drm: Remove utterly bogus preempt_disable() sections
2011-11-15hugetlb: release pages in the error path of hugetlb_cow()Hillf Danton
If we fail to prepare an anon_vma, the {new, old}_page should be released, or they will leak. Signed-off-by: Hillf Danton <dhillf@gmail.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <jweiner@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-15drivers/firmware/dmi_scan.c: make dmi_name_in_vendors more focusedJean Delvare
The current implementation of dmi_name_in_vendors() is an invitation to lazy coding and false positives [1]. Searching for a string in 8 know what you're looking for, so you should know where to look. strstr isn't fast, especially when it fails, so we should avoid calling it when it just can't succeed. Looking at the current users of the function, it seems clear to me that they are looking for a system or board vendor name, so let's limit dmi_name_in_vendors to these two DMI fields. This much better matches the function name, BTW. [1] We currently have code looking for short names in DMI data, such as "IBM", "ASUS" or "Acer". I let you guess what will happen the day other vendors ship products named, for example, "SCHREIBMEISTER", "PEGASUS" or "Acerola". Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit (git 2.34.1) at 2025-07-15 23:57:21 +0000