| Age | Commit message (Collapse) | Author |
|---|
|
The on-disk representation and the vfs both use 64-bit tv_sec values,
so let's change the last missing piece in the middle.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
In error path of f2fs_move_rehashed_dirents, inode page could be writeback
state, so we should wait on inode page writeback before updating it.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
As Jens reported, we'd better assign REQ_RAHEAD to bio by the fact that
->readpages is called only from read-ahead.
In Documentation/filesystems/vfs.txt,
readpages: called by the VM to read pages associated with the address_space
object. This is essentially just a vector version of
readpage. Instead of just one page, several pages are
requested.
readpages is only used for read-ahead, so read errors are
ignored. If anything goes wrong, feel free to give up.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch fix hungtask problem which can be reproduced as follow:
Thread 0~3:
while true
do
touch /xxx/test/file_xxx
done
Thread 4 write a new checkpoint every three seconds.
In the meantime, fio start 16 threads for randwrite.
With my debug info, cycles num will exceed 1000 in function
f2fs_sync_dirty_inodes, and most of cycle will be dropped
into congestion_wait() and sleep more than 20ms. Cycles num
reduced to 3 with this patch.
Signed-off-by: Yunlei He <heyunlei@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
"ret" can be uninitialized on the success path when "in ==
F2FS_GOING_DOWN_FULLSYNC".
Fixes: 60b2b4ee2bc0 ("f2fs: Fix deadlock in shutdown ioctl")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Actually, we don't need to issue discard commands, if discard is on, as
mentioned in the comment.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
As Anatoly Trosinenko reported in bugzilla:
How to reproduce:
1. Compile the 73fcb1a370c76 version of the kernel using the config attached
2. Unpack and mount the attached filesystem image as F2FS
3. The kernel will BUG() on mount (BUGs are explicitly enabled in config)
[ 2.233612] F2FS-fs (sda): Found nat_bits in checkpoint
[ 2.248422] ------------[ cut here ]------------
[ 2.248857] kernel BUG at fs/f2fs/node.c:1967!
[ 2.249760] invalid opcode: 0000 [#1] SMP NOPTI
[ 2.250219] Modules linked in:
[ 2.251848] CPU: 0 PID: 944 Comm: mount Not tainted 4.17.0-rc5+ #1
[ 2.252331] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 2.253305] RIP: 0010:build_free_nids+0x337/0x3f0
[ 2.253672] RSP: 0018:ffffae7fc0857c50 EFLAGS: 00000246
[ 2.254080] RAX: 00000000ffffffff RBX: 0000000000000123 RCX: 0000000000000001
[ 2.254638] RDX: ffff9aa7063d5c00 RSI: 0000000000000122 RDI: ffff9aa705852e00
[ 2.255190] RBP: ffff9aa705852e00 R08: 0000000000000001 R09: ffff9aa7059090c0
[ 2.255719] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9aa705852e00
[ 2.256242] R13: ffff9aa7063ad000 R14: ffff9aa705919000 R15: 0000000000000123
[ 2.256809] FS: 00000000023078c0(0000) GS:ffff9aa707800000(0000) knlGS:0000000000000000
[ 2.258654] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2.259153] CR2: 00000000005511ae CR3: 0000000005872000 CR4: 00000000000006f0
[ 2.259801] Call Trace:
[ 2.260583] build_node_manager+0x5cd/0x600
[ 2.260963] f2fs_fill_super+0x66a/0x17c0
[ 2.261300] ? f2fs_commit_super+0xe0/0xe0
[ 2.261622] mount_bdev+0x16e/0x1a0
[ 2.261899] mount_fs+0x30/0x150
[ 2.262398] vfs_kern_mount.part.28+0x4f/0xf0
[ 2.262743] do_mount+0x5d0/0xc60
[ 2.263010] ? _copy_from_user+0x37/0x60
[ 2.263313] ? memdup_user+0x39/0x60
[ 2.263692] ksys_mount+0x7b/0xd0
[ 2.263960] __x64_sys_mount+0x1c/0x20
[ 2.264268] do_syscall_64+0x43/0xf0
[ 2.264560] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 2.265095] RIP: 0033:0x48d31a
[ 2.265502] RSP: 002b:00007ffc6fe60a08 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
[ 2.266089] RAX: ffffffffffffffda RBX: 0000000000008000 RCX: 000000000048d31a
[ 2.266607] RDX: 00007ffc6fe62fa5 RSI: 00007ffc6fe62f9d RDI: 00007ffc6fe62f94
[ 2.267130] RBP: 00000000023078a0 R08: 0000000000000000 R09: 0000000000000000
[ 2.267670] R10: 0000000000008000 R11: 0000000000000246 R12: 0000000000000000
[ 2.268192] R13: 0000000000000000 R14: 00007ffc6fe60c78 R15: 0000000000000000
[ 2.268767] Code: e8 5f c3 ff ff 83 c3 01 41 83 c7 01 81 fb c7 01 00 00 74 48 44 39 7d 04 76 42 48 63 c3 48 8d 04 c0 41 8b 44 06 05 83 f8 ff 75 c1 <0f> 0b 49 8b 45 50 48 8d b8 b0 00 00 00 e8 37 59 69 00 b9 01 00
[ 2.270434] RIP: build_free_nids+0x337/0x3f0 RSP: ffffae7fc0857c50
[ 2.271426] ---[ end trace ab20c06cd3c8fde4 ]---
During loading NAT entries, we will do sanity check, once the entry info
is corrupted, it will cause BUG_ON directly to protect user data from
being overwrited.
In this case, it will be better to just return failure on mount() instead
of panic, so that user can get hint from kmsg and try fsck for recovery
immediately rather than after an abnormal reboot.
https://bugzilla.kernel.org/show_bug.cgi?id=199769
Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Enable in-memory inode checksum to protect metadata blocks from
in-memory scribbles when checking consistency, which has no
performance requirements.
Signed-off-by: Weichao Guo <guoweichao@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
In fill_super, if root inode's attribute is incorrect, we need to
call f2fs_destroy_stats to release stats memory.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
readdir_ra is sysfs configuration instead of mount option, so it should
not be initialized in default_options(), otherwise after remount, it can
be reset to be enabled which may not as user wish, so let's move it to
f2fs_tuning_parameters().
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Let default_options() initialize s_res{u,g}id with default value like
other options.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
During orphan inode recovery, checkpoint should never succeed due to
SBI_POR_DOING flag, so we don't need acquire orphan ino which only be
used by checkpoint.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
[ 155.018460] ======================================================
[ 155.021431] WARNING: possible circular locking dependency detected
[ 155.024339] 4.18.0-rc3+ #5 Tainted: G OE
[ 155.026879] ------------------------------------------------------
[ 155.029783] umount/2901 is trying to acquire lock:
[ 155.032187] 00000000c4282f1f (kn->count#130){++++}, at: kernfs_remove+0x1f/0x30
[ 155.035439]
[ 155.035439] but task is already holding lock:
[ 155.038892] 0000000056e4307b (&type->s_umount_key#41){++++}, at: deactivate_super+0x33/0x50
[ 155.042602]
[ 155.042602] which lock already depends on the new lock.
[ 155.042602]
[ 155.047465]
[ 155.047465] the existing dependency chain (in reverse order) is:
[ 155.051354]
[ 155.051354] -> #1 (&type->s_umount_key#41){++++}:
[ 155.054768] f2fs_sbi_store+0x61/0x460 [f2fs]
[ 155.057083] kernfs_fop_write+0x113/0x1a0
[ 155.059277] __vfs_write+0x36/0x180
[ 155.061250] vfs_write+0xbe/0x1b0
[ 155.063179] ksys_write+0x55/0xc0
[ 155.065068] do_syscall_64+0x60/0x1b0
[ 155.067071] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 155.069529]
[ 155.069529] -> #0 (kn->count#130){++++}:
[ 155.072421] __kernfs_remove+0x26f/0x2e0
[ 155.074452] kernfs_remove+0x1f/0x30
[ 155.076342] kobject_del.part.5+0xe/0x40
[ 155.078354] f2fs_put_super+0x12d/0x290 [f2fs]
[ 155.080500] generic_shutdown_super+0x6c/0x110
[ 155.082655] kill_block_super+0x21/0x50
[ 155.084634] kill_f2fs_super+0x9c/0xc0 [f2fs]
[ 155.086726] deactivate_locked_super+0x3f/0x70
[ 155.088826] cleanup_mnt+0x3b/0x70
[ 155.090584] task_work_run+0x93/0xc0
[ 155.092367] exit_to_usermode_loop+0xf0/0x100
[ 155.094466] do_syscall_64+0x162/0x1b0
[ 155.096312] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 155.098603]
[ 155.098603] other info that might help us debug this:
[ 155.098603]
[ 155.102418] Possible unsafe locking scenario:
[ 155.102418]
[ 155.105134] CPU0 CPU1
[ 155.107037] ---- ----
[ 155.108910] lock(&type->s_umount_key#41);
[ 155.110674] lock(kn->count#130);
[ 155.113010] lock(&type->s_umount_key#41);
[ 155.115608] lock(kn->count#130);
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Once we shutdown f2fs, we have to flush stale pages in order to unmount
the system. In order to make stable, we need to stop fault injection as well.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
It turns out losing meta pages in shutdown period makes f2fs very unstable
so that I could see many unexpected error conditions.
Let's keep meta pages for fault injection and sudden power-off tests.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
When unmounting f2fs in force mode, we can get it stuck by io_schedule()
by some pending IOs in meta_inode.
io_schedule+0xd/0x30
wait_on_page_bit_common+0xc6/0x130
__filemap_fdatawait_range+0xbd/0x100
filemap_fdatawait_keep_errors+0x15/0x40
sync_inodes_sb+0x1cf/0x240
sync_filesystem+0x52/0x90
generic_shutdown_super+0x1d/0x110
kill_f2fs_super+0x28/0x80 [f2fs]
deactivate_locked_super+0x35/0x60
cleanup_mnt+0x36/0x70
task_work_run+0x79/0xa0
exit_to_usermode_loop+0x62/0x70
do_syscall_64+0xdb/0xf0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
0xffffffffffffffff
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This fixes to support dio having unaligned buffers as buffered writes.
xfs_io -f -d -c "pwrite 0 512" $testfile
-> okay
xfs_io -f -d -c "pwrite 1 512" $testfile
-> EINVAL
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Let's flush journal nat entries for speed up in the next run.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
"A few more changes for v4.18:
- wire up the two new system calls io_pgetevents and rseq
- fix a register corruption in the expolines code for machines
without EXRL
- drastically reduce the memory utilization of the dasd driver
- fix reference counting for KVM page table pages"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: wire up rseq system call
s390: wire up io_pgetevents system call
s390/mm: fix refcount usage for 4K pgste
s390/dasd: reduce the default queue depth and nr of hardware queues
s390: Correct register corruption in critical section cleanup
|
|
Pull drm fixes from Dave Airlie:
"This is the drm fixes for rc4.
It's a bit larger than I'd like but the exynos cleanups are pretty
mechanical, and I'd rather have them in sooner rather than later so we
can avoid too much conflicts around them. The non-mechanincal exynos
changes are mostly fixes for new feature recently introduced.
Apart from the exynos updates, we have:
i915:
- GVT and GGTT mapping fixes
amdgpu:
- fix HDMI2.0 4K@60 Hz regression
- Hotplug fixes for dual-GPU laptops to make power management better
- misc vega12 bios fixes, a race fix and some typos.
sii8620 bridge:
- small fixes around mode setting
core:
- use kvzalloc to allocate blob property memory"
* tag 'drm-fixes-2018-07-06' of git://anongit.freedesktop.org/drm/drm: (34 commits)
drm/amd/display: add a check for display depth validity
drm/amd/display: adding ycbcr420 pixel encoding for hdmi
drm/udl: fix display corruption of the last line
drm/bridge/sii8620: Fix link mode selection
drm/bridge/sii8620: Fix display of packed pixel modes
drm/bridge/sii8620: Send AVI infoframe in all MHL versions
drm/amdgpu: fix user fence write race condition
drm/i915: Try GGTT mmapping whole object as partial
drm/amdgpu/pm: fix display count in non-DC path
drm/amdgpu: fix swapped emit_ib_size in vce3
drm: Use kvzalloc for allocating blob property memory
drm/i915/gvt: changed DDI mode emulation type
drm/i915/gvt: fix a bug of partially write ggtt enties
drm/exynos: Replace drm_dev_unref with drm_dev_put
drm/exynos: Replace drm_gem_object_unreference_unlocked with put function
drm/exynos: Replace drm_framebuffer_{un/reference} with put,get functions
drm/exynos: ipp: use correct enum type
drm/exynos: decon5433: Fix WINCONx reset value
drm/exynos: decon5433: Fix per-plane global alpha for XRGB modes
drm/exynos: fimc: Use real buffer width for configuring the hardware
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes and cleanups from Steven Rostedt:
"While cleaning out my INBOX, I found a few patches that were lost in
the noise. These are minor bug fixes and clean ups. Those include:
- avoid a string overflow
- code that didn't match the comment (but should)
- a small code optimization (use of a conditional)
- quiet printf warnings
- nuke unused code
- fix function graph interrupt annotation"
* tag 'trace-v4.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix missing return symbol in function_graph output
ftrace: Nuke clear_ftrace_function
tracing: Use __printf markup to silence compiler
tracing: Optimize trace_buffer_iter() logic
tracing: Make create_filter() code match the comments
tracing: Avoid string overflow
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
Fixups
- Fix several problems to IPPv2 merged to mainline recentely.
. An align problem of width size that IPP driver incorrectly
calculated the real buffer size.
. Horizontal and vertical flip problem.
. Per-plane global alpha for XRGB modes.
. Incorrect variant of the YUV modes.
- Fix plane overlapping problem.
. The stange order of overlapping planes on XRGB modes
by setting global alpha value to maximum value.
Cleanup
- Rename a enum type, drm_ipp_size_id, to one specific to Exynos,
drm_exynos_ipp_limit_type.
- Replace {un/reference} with {put,get} functions.
. it replaces several reference/unreference functions with Linux
kernel nameing standard.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1530512041-21392-1-git-send-email-inki.dae@samsung.com
|
|
into drm-fixes
- Fix an HDMI 2.0 4k@60 regression
- Hotplug fixes for PX/HG laptops
- Fixes for vbios changes in vega12
- Fix a race in the user fence code
- Fix a couple of misc typos
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705155206.2752-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
A couple of GVT fixes, and a GGTT mmapping fix.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8736wxq35t.fsf@intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Fixes for v4.18-rc4:
- A few small fixes for the sii8620 bridge.
- Allocate blob property memory using kvzalloc instead of kmalloc.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4267636e-bb7c-8f69-eeff-12e045b3e7e1@linux.intel.com
|
|
sgid directories have special semantics, making newly created files in
the directory belong to the group of the directory, and newly created
subdirectories will also become sgid. This is historically used for
group-shared directories.
But group directories writable by non-group members should not imply
that such non-group members can magically join the group, so make sure
to clear the sgid bit on non-directories for non-members (but remember
that sgid without group execute means "mandatory locking", just to
confuse things even more).
Reported-by: Jann Horn <jannh@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It turns out that systemd has a bug: it wants to load the autofs module
early because of some initialization ordering with udev, and it doesn't
do that correctly. Everywhere else it does the proper "look up module
name" that does the proper alias resolution, but in that early code, it
just uses a hardcoded "autofs4" for the module name.
The result of that is that as of commit a2225d931f75 ("autofs: remove
left-over autofs4 stubs"), you get
systemd[1]: Failed to insert module 'autofs4': No such file or directory
in the system logs, and a lack of module loading. All this despite the
fact that we had very clearly marked 'autofs4' as an alias for this
module.
What's so ridiculous about this is that literally everything else does
the module alias handling correctly, including really old versions of
systemd (that just used 'modprobe' to do this), and even all the other
systemd module loading code.
Only that special systemd early module load code is broken, hardcoding
the module names for not just 'autofs4', but also "ipv6", "unix",
"ip_tables" and "virtio_rng". Very annoying.
Instead of creating an _additional_ separate compatibility 'autofs4'
module, just rely on the fact that everybody else gets this right, and
just call the module 'autofs4' for compatibility reasons, with 'autofs'
as the alias name.
That will allow the systemd people to fix their bugs, adding the proper
alias handling, and maybe even fix the name of the module to be just
"autofs" (so that they can _test_ the alias handling). And eventually,
we can revert this silly compatibility hack.
See also
https://github.com/systemd/systemd/issues/9501
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=902946
for the systemd bug reports upstream and in the Debian bug tracker
respectively.
Fixes: a2225d931f75 ("autofs: remove left-over autofs4 stubs")
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Reported-by: Michael Biebl <biebl@debian.org>
Cc: Ian Kent <raven@themaw.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix a recent ACPICA regression, fix a battery driver regression
introduced during the 4.17 cycle and fix up the recently added support
for the PPTT ACPI table.
Specifics:
- Revert part of a recent ACPICA regression fix that added leading
newlines to ACPICA error messages and made the kernel log look
broken (Rafael Wysocki).
- Fix an ACPI battery driver regression introduced during the 4.17
cycle due to incorrect error handling that made Thinkpad 13 laptops
crash on boot (Jouke Witteveen).
- Fix up the recently added PPTT ACPI table support by covering the
case when a PPTT structure represents a processors group correctly
(Sudeep Holla)"
* tag 'acpi-4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / battery: Safe unregistering of hooks
ACPI / PPTT: use ACPI ID whenever ACPI_PPTT_ACPI_PROCESSOR_ID_VALID is set
ACPICA: Drop leading newlines from error messages
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a PCI power management regression introduced during the 4.17
cycle and fix up the recently added support for devices in multiple
power domains.
Specifics:
- Resume parallel PCI (non-PCIe) bridges on suspend-to-RAM (ACP S3)
to avoid confusing the platform firmware which started to happen
after a core power management regression fix that went in during
the 4.17 cycle (Rafael Wysocki).
- Fix up the recently added support for devices in multiple power
domains by avoiding to power up the entire domain unnecessarily
when attaching a device to it (Ulf Hansson)"
* tag 'pm-4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / Domains: Don't power on at attach for the multi PM domain case
PCI / ACPI / PM: Resume bridges w/o drivers on suspend-to-RAM
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux
Pull RISC-V fixes from Palmer Dabbelt:
"This contains a handful of fixes for the RISC-V port:
- A fix to R_RISCV_ADD32/R_RISCV_SUB32 relocations that allows
modules that use these to load correctly.
- The removal of of_platform_populate(), which is obselete.
- The removal of irq-riscv-intc.h, which is obselete.
- A fix to PTRACE_SETREGSET.
- Fixes that allow the RV32I kernel to build (at least for Zong, I've
got another patch on the mailing list that's necessary on my setup :)).
I've just given these a defconfig build test"
* tag 'riscv-for-linus-4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
RISC-V: Fix PTRACE_SETREGSET bug.
RISC-V: Don't include irq-riscv-intc.h
riscv: remove unnecessary of_platform_populate call
RISC-V: fix R_RISCV_ADD32/R_RISCV_SUB32 relocations
RISC-V: Change variable type for 32-bit compatible
RISC-V: Add definiion of extract symbol's index and type for 32-bit
RISC-V: Select GENERIC_UCMPDI2 on RV32I
RISC-V: Add conditional macro for zone of DMA32
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu fix from Greg Ungerer:
"A single fix for breakage introduced in this merge window"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: fix "bad page state" oops on ColdFire boot
|
|
[why]
HDMI 2.0 fails to validate 4K@60 timing with 10 bpc
[how]
Adding a helper function that would verify if the display depth
assigned would pass a bandwidth validation.
Drop the display depth by one level till calculated pixel clk
is lower than maximum TMDS clk.
Bugzilla: https://bugs.freedesktop.org/106959
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
HDMI EDID's VSDB contains spectial timings for specifically
YCbCr 4:2:0 colour space. In those cases we need to verify
if the mode provided is one of the special ones has to use
YCbCr 4:2:0 pixel encoding for display info.
[how]
Verify if the mode is using specific ycbcr420 colour space with
the help of DRM helper function and assign the mode to use
ycbcr420 pixel encoding.
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Merge ACPICA regression fix and a fix for the recently added PPTT
support.
* acpi-tables:
ACPI / PPTT: use ACPI ID whenever ACPI_PPTT_ACPI_PROCESSOR_ID_VALID is set
* acpica:
ACPICA: Drop leading newlines from error messages
|
|
Merge a PCI power management regression fix.
* pm-pci:
PCI / ACPI / PM: Resume bridges w/o drivers on suspend-to-RAM
|
|
The displaylink hardware has such a peculiarity that it doesn't render a
command until next command is received. This produces occasional
corruption, such as when setting 22x11 font on the console, only the first
line of the cursor will be blinking if the cursor is located at some
specific columns.
When we end up with a repeating pixel, the driver has a bug that it leaves
one uninitialized byte after the command (and this byte is enough to flush
the command and render it - thus it fixes the screen corruption), however
whe we end up with a non-repeating pixel, there is no byte appended and
this results in temporary screen corruption.
This patch fixes the screen corruption by always appending a byte 0xAF at
the end of URB. It also removes the uninitialized byte.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
These patches for building 32-bit RISC-V kernel.
- Fix the compile errors and warnings on RV32I.
- Fix some incompatible problem on RV32I.
- Add format.h for compatible of print format.
The fixed width integer types format for Elf_Addr will move to
generic header by another patch. For now, there are some warning
about unexpected argument of type on RV32I.
Change in v1:
- Fix some error in v1
- Remove implementation of fixed width integer types format for Elf_Addr.
|
|
In riscv_gpr_set, pass regs instead of ®s to user_regset_copyin to fix
gdb segfault.
Signed-off-by: Jim Wilson <jimw@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
This file has never existed in the upstream kernel, but it's guarded by
an #ifdef that's also never existed in the upstream kernel. As a part
of our interrupt controller refactoring this header is no longer
necessary, but this reference managed to sneak in anyway.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
The DT core will call of_platform_default_populate, so it is not
necessary for arch specific code to call it unless there are custom
match entries, auxdata or parent device. Neither of those apply here, so
remove the call.
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: linux-riscv@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
The R_RISCV_ADD32/R_RISCV_SUB32 relocations should add/subtract the
address of the symbol (without overflow check), not its contents.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
Signed-off-by: Zong Li <zong@andestech.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
Use generic marco to get the index and type of symbol.
Signed-off-by: Zong Li <zong@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
On 32-bit, it need to use __ucmpdi2, otherwise, it can't find the __ucmpdi2
symbol.
Signed-off-by: Zong Li <zong@andestech.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
The DMA32 is for 64-bit usage.
Signed-off-by: Zong Li <zong@andestech.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
Current link mode values do not allow to enable packed pixel modes.
Select packed pixel clock mode, if needed, every time the link mode
register gets updated.
Signed-off-by: Maciej Purski <m.purski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1530204243-6370-4-git-send-email-m.purski@samsung.com
|
|
Current implementation does not guarantee packed pixel modes working
with every dongle. There are some dongles, which require selecting
the output mode explicitly.
Write proper values to registers in packed_pixel mode, based on how it
is done in vendor's code. Select output color space: RGB
(no packed pixel) or YCBCR422 (packed pixel).
This reverts commit e8b92efa629dac0e70ea4145c5e70616de5f89c8
("drm/bridge/sii8620: fix display of packed pixel modes in MHL2").
Signed-off-by: Maciej Purski <m.purski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1530204243-6370-3-git-send-email-m.purski@samsung.com
|
|
Currently AVI infoframe is sent only in MHL3. However, some MHL2 dongles
need AVI infoframe to work correctly in either packed pixel mode or
non-packed pixel mode.
Send AVI infoframe in set_infoframes() in every case. Create an
infoframe using drm_hdmi_infoframe_from_display_mode() instead of
manually filling each infoframe structure's field.
Signed-off-by: Maciej Purski <m.purski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1530204243-6370-2-git-send-email-m.purski@samsung.com
|
|
A hooking API was implemented for 4.17 in fa93854f7a7ed63d followed
by hooks for Thinkpad laptops in 2801b9683f740012. The Thinkpad
drivers did not support the Thinkpad 13 and the hooking API crashes
on unsupported batteries by altering a list of hooks during unsafe
iteration. Thus, Thinkpad 13 laptops could no longer boot.
Additionally, a lock was kept in place and debugging information was
printed out of order.
Fixes: fa93854f7a7e (battery: Add the battery hooking API)
Cc: 4.17+ <stable@vger.kernel.org> # 4.17+
Signed-off-by: Jouke Witteveen <j.witteveen@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The buffer object backing the user fence is reserved using the non-user
fence, i.e., as soon as the non-user fence is signaled, the user fence
buffer object can be moved or even destroyed.
Therefore, emit the user fence first.
Both fences have the same cache invalidation behavior, so this should
have no user-visible effect.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
