summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-04-19iio/gyro/bmg160: Add support for BMI088 chipMike Looijmans
The BMI088 is pin-compatible with the BMI055, and provides both gyro and accel functions. The gyro part is similar to the BMI055 and this adds the chip to the list of supported devices for the gyro part. The accel part of the chip is not compatible with anything existing already. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-04-19iio: buffer: re-introduce bitmap_zalloc() for trialmaskAlexandru Ardelean
Commit 3862828a903d3 ("iio: buffer: Switch to bitmap_zalloc()") introduced bitmap_alloc(), but commit 20ea39ef9f2f9 ("iio: Fix scan mask selection") reverted it. This change adds it back. The only difference is that it's adding bitmap_zalloc(). There might be some changes later that would require initializing it to zero. In any case, now it's already zero-ing the trialmask. Appears to have been the result of merge conflict resolution rather than an intentional revert. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-04-19MAINTAINERS: Add Syed Nayyar Waris to ACCES 104-QUAD-8 driverSyed Nayyar Waris
Add Syed Nayyar Waris as a co-maintainer for the ACCES 104-QUAD-8 counter driver. Signed-off-by: Syed Nayyar Waris <syednwaris@gmail.com> Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-04-19iio: ad_sigma_delta: remove unused IIO channel macrosAlexandru Ardelean
Now that all channel SigmaDelta IIO channel macros have been localized, remove the generic ones. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-04-19iio: adc: ad7793: define/use own IIO channel macrosAlexandru Ardelean
This driver seems to use most of the AD_SD_*_CHANNEL. This change will move them in the driver. The intent is that if a new part comes along which would require tweaks per IIO channel, these should be doable in the driver. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-04-19iio: adc: ad7791: define/use own IIO channel macrosAlexandru Ardelean
This driver seems to use most of the AD_SD_*_CHANNEL. This change will move them in the driver. The intent is that if a new part comes along which would require tweaks per IIO channel, these should be doable in the driver. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-04-19iio: adc: ad7780: define/use own IIO channel macrosAlexandru Ardelean
This change gets rid of the AD_SD_*_CHANNEL macros in favor of defining it's own. The ad7780 is quite simpler than it's other Sigma-Delta brothers. It turned out that centralizing the AD_SD_*_CHANNEL macros doesn't scale too well, especially with some more complicated drivers. Some of the variations in the more complicated drivers require new macros, and that way things can become harder to maintain. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-04-16staging: rtl8188eu: make const char array staticMichael Straube
Make const char array 'fw_name' static. Clears a checkpatch warning and reduces object file size by 17 bytes (gcc 9.3.1 x86_64). WARNING: const array should probably be static const Signed-off-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20200413175957.30165-4-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16staging: rtl8188eu: cleanup long line in fw.cMichael Straube
Add line break to avoid line length over 80 characters. Signed-off-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20200413175957.30165-3-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16staging: rtl8188eu: rename define to upper caseMichael Straube
Rename 'FWDL_ChkSum_rpt' to 'FWDL_CHKSUM_RPT' as defines are normaly named all upper case. Also clears a camel case checkpatch warning. Signed-off-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20200413175957.30165-2-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16staging: vt6656: remove redundant assignment to variable ed_inxColin Ian King
The variable ed_inx is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200414143502.237803-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16staging: vt6656: Remove duplicate code for the phy->service assignmentOscar Carter
Take out the "phy->service" assignment from the if-else statement due to it's the same for the two branches. Signed-off-by: Oscar Carter <oscar.carter@gmx.com> Link: https://lore.kernel.org/r/20200414153849.5785-6-oscar.carter@gmx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16staging: vt6656: Refactor the assignment of the phy->signal variableOscar Carter
Create a constant array with the values of the "phy->signal" for every rate. Remove all "phy->signal" assignments inside the switch statement and replace these with a single reading from the new vnt_phy_signal array. The constant array can be of one dimension because the OR mask with BIT(3) or BIT(4) allow obtain a second value according to the rate, the preamble_type and the pkt_type. Signed-off-by: Oscar Carter <oscar.carter@gmx.com> Link: https://lore.kernel.org/r/20200414153849.5785-5-oscar.carter@gmx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16staging: vt6656: Use define instead of magic number for tx_rateOscar Carter
Use the define RATE_11M present in the file "device.h" instead of the magic number 3. So the code is more clear. Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Oscar Carter <oscar.carter@gmx.com> Link: https://lore.kernel.org/r/20200414153849.5785-4-oscar.carter@gmx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16staging: vt6656: Use BIT() macro instead of bit shift operatorOscar Carter
Use the BIT() macro instead of the bit left shift operator. So the code is more clear. It's safe to remove the casting to u16 type because the value obtained never exceeds 16 bits. So the casting is unnecessary. Signed-off-by: Oscar Carter <oscar.carter@gmx.com> Link: https://lore.kernel.org/r/20200414153849.5785-3-oscar.carter@gmx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16staging: vt6656: Return error code in vnt_rf_write_embedded functionOscar Carter
Use the error code returned by the vnt_control_out function as the returned value of the vnt_rf_write_embedded function instead of a boolean value. Then, fix all vnt_rf_write_embedded calls removing the "and" operations and replace with a direct assignment to the ret variable and add a check condition after every call. Also replace the boolean values true or false in the vnt_rf_set_txpower function to 0 or error code EINVAL to follow the coding style guide. The vnt_rf_set_txpower function is called only in the vnt_rf_setpower function that already returns error codes. The calls to this function (vnt_rf_set_txpower) not use the returned values, so they not need to be fixed. Signed-off-by: Oscar Carter <oscar.carter@gmx.com> Link: https://lore.kernel.org/r/20200414153849.5785-2-oscar.carter@gmx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16staging: vc04_services: bcm2835-audio: Make function arguments alignment ↵R Veera Kumar
match open parenthesis Make function arguments alignment match open parenthesis. Found using checkpatch.pl. Signed-off-by: R Veera Kumar <vkor@vkten.in> Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Link: https://lore.kernel.org/r/20200413165905.6081-1-vkor@vkten.in Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16staging: sm750fb: Make function arguments alignment match open parenthesisR Veera Kumar
Make function arguments alignment match open parenthesis. Found using checkpatch.pl. Signed-off-by: R Veera Kumar <vkor@vkten.in> Link: https://lore.kernel.org/r/20200413160753.3787-1-vkor@vkten.in Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16staging: rtl8712: correct spelling mistake in commentMichael Straube
Correct a spelling mistake discovered by checkpatch. attatch -> attach Signed-off-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20200413215109.15749-1-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16staging: mt7621-pci: initialize 'n' variable when it is declaredSergio Paracuellos
Variable 'n' in 'mt7621_pcie_init_virtual_bridges' function can be directly initialized when it is declared instead of doing it before using it first. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20200413155018.31921-3-sergio.paracuellos@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16staging: mt7621-pci: add clarification comment in ↵Sergio Paracuellos
'mt7621_pcie_init_virtual_bridges' Add a comment explaining a bit what is going on in this function. It would be helfulp for other people for a better understanding of the code. Suggested-by: NeilBrown <neil@brown.name> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20200413155018.31921-2-sergio.paracuellos@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16staging: mt7621-pci: rename 'PCIE_P2P_MAX' into 'PCIE_P2P_CNT'Sergio Paracuellos
Definition 'PCIE_P2P_MAX' is '3'. The value here is not a MAXimum. It is a count or a number. It is how many masks there are. The masks are numbered 0, 1, 2 so the maximum is 2. Hence rename variable into 'PCIE_P2P_CNT' which is a more accurate name. Suggested-by: NeilBrown <neil@brown.name> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20200413155018.31921-1-sergio.paracuellos@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16staging: wfx: update TODOJérôme Pouiller
Update the TODO list associated to the wfx driver with the last progresses and last remarks made by reviewers. The items about support for P2P and mesh have also been removed. Indeed, it seems that the device does not fully support them. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200415161147.69738-21-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16staging: wfx: drop useless attribute 'filter_mcast'Jérôme Pouiller
Currently, wfx_update_filtering() apply the value of wvif->filter_mcast to the hardware. But an attentive reader will note that wfx_update_filtering() is always called after set wvif->filter_mcast. Thus, it not necessary to store filter_mcast in the struct wfx_vif. We can just pass it as parameter. Also rename wfx_update_filtering() in wfx_filter_mcast() to reflect this change. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200415161147.69738-20-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16staging: wfx: drop useless filter update when starting APJérôme Pouiller
mac80211 explicitly call wfx_configure_filters() before/after starting AP. Thus, it is not necessary to call wfx_update_filtering() from wfx_start_ap(). Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200415161147.69738-19-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16staging: wfx: split out wfx_filter_beacon()Jérôme Pouiller
Currently, wfx_update_filtering() is sometime called only to apply the value of wvif->filter_beacon to the hardware. It is nicer to have a specific function for beacon filtering. In add, an attentive reader would note that wfx_update_filtering() is always called after change of wvif->filter_beacon. Thus, it not necessary to store filter_beacon in the struct wfx_vif. We can just pass it as parameter. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200415161147.69738-18-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16staging: wfx: drop useless attributes 'filter_prbreq' and 'filter_bssid'Jérôme Pouiller
It is now useless to store filter_prbreq and filter_bssid in struct wfx_vif. We can just pass them as parameters to hif_set_rx_filter(). Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200415161147.69738-17-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16staging: wfx: drop useless call to hif_set_rx_filter()Jérôme Pouiller
hif_set_rx_filter() apply changes on filter_prbreq and filter_bssid to the hardware. Each time filter_prbreq and filter_bssid are changed, hif_set_rx_filter() is called. Currently, on extra call to hif_set_rx_filter() is made from wfx_update_filtering(). This call is useless. Drop it. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200415161147.69738-16-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16staging: wfx: drop struct wfx_grp_addr_tableJérôme Pouiller
The struct wfx_grp_addr_table is only instantiated on one place. There is no justifiation for this struct. Moreover, it is not consistent with other fields related to filtering (filter_bssid, etc...). Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200415161147.69738-15-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16staging: wfx: align semantic of probe request filter with other filtersJérôme Pouiller
Filters provided by HIF API are sometime inclusive, sometime exclusive. This patch align the behavior and name of the probe request filter with the other filters. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200415161147.69738-14-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16staging: wfx: align semantic of beacon filter with other filtersJérôme Pouiller
Filters provided by HIF API are sometime inclusive, sometime exclusive. This patch align the behavior and name of the beacon filter with the other filters. Also avoid double negation: "disable filter" Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200415161147.69738-13-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16staging: wfx: drop useless wfx_fwd_probe_req()Jérôme Pouiller
wfx_fwd_probe_req() is a function of two lines called from only one place. In order to uniformize all filtering functions, drop wfx_fwd_probe_req(). Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200415161147.69738-12-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16staging: wfx: ensure that probe requests are filtered when APJérôme Pouiller
Device is able to automatically reply to probe request (therefore, the probe requests are not forwarded to host). This feature is enabled by wfx_start_ap(). However, further calls to wfx_configure_filter() can disable it. So, relocate the handling of probe request filtering in wfx_configure_filter(). Note that wfx_configure_filter() is always called by mac80211 when an AP start. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200415161147.69738-11-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16staging: wfx: stop changing filtering rule in wfx_hw_scan()Jérôme Pouiller
It is not very clear why driver ask to firmware to stop filtering probe request during scan. It is particularly weird because scan is not supported in AP mode. In add, it does not restore previous filtering state after scanning. It seems to be a mistake and should be dropped. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200415161147.69738-10-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16staging: wfx: do not use built-in AUTO_ERP featureJérôme Pouiller
Firmware is able to detect detect changes about ERP protection in beacons and automatically enable/disable ERP protection. However, it not bring performance improvements and we are more confident in the ERP handling of mac80211. So, the patch disable this feature. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200415161147.69738-9-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16staging: wfx: disabling beacon filtering after hif_reset() is uselessJérôme Pouiller
After hif_reset(), device stop to receive any RF data. So, it is useless to disable beacon filtering. In add, if necessary, mac80211 will call wfx_configure_filter(). Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200415161147.69738-8-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16staging: wfx: do not wait for a dtim before associateJérôme Pouiller
The only reason we ask to mac80211 to wait for a dtim before to associate is to get an accurate DTIM value. However, we can temporary set the dtim period to 1. Then we can waiting for BSS_CHANGED_BEACON_INFO for the real value. Thus, the association process is faster. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200415161147.69738-7-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16staging: wfx: wfx_update_filtering_work() is no more usedJérôme Pouiller
Since we had simplified the join process, update_filtering_work is no more used. Drop it. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200415161147.69738-6-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16staging: wfx: simplify handling of beacon filter during join processJérôme Pouiller
When the device joins an AP, beacon are forwarded to the host. Once has retrieved all necessary parameters, we can start to filter the beacon (and only beacon with changed/new data will be forwarded). Currently, the driver detect beacons in data Rx process. It is far more easier to just wait for the BSS_CHANGED_BEACON_INFO event. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200415161147.69738-5-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16staging: wfx: rework wfx_configure_filter()Jérôme Pouiller
wfx_configure_filter() lacks of coherency. In add, some corner cases seems to not been handled properly. Rework the whole function(). Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200415161147.69738-4-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16staging: wfx: simplify wfx_update_filtering()Jérôme Pouiller
Inline wfx_set_mcast_filter() into wfx_update_filtering() and remove useless intermediate variables. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200415161147.69738-3-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-16staging: wfx: update filtering even if not connectedJérôme Pouiller
Currently, filtering are not update if the device is not connected. There is no obvious rationale for that. Updating filtering while it is not necessary is harmless. On the other hand, it is difficult to ensure that the filtering rule has been correctly sent to the firmware. Just drop this useless condition. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200415161147.69738-2-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13staging: vt6656: formulate rspinf values into tablesMalcolm Priestley
Four tables can be extracted from RSPINF_A_* based on BB_TYPE_11A or else being GB rates. Preamble short or long tables from fixed size len of 14 for RSPINF_B rates. Remove function vnt_calculate_ofdm_rate and replace with the tables calling RSPINF_A and RSPINF_B separately. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Link: https://lore.kernel.org/r/addca9e1-9ea2-59ee-dec9-3afb3c731c2e@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13staging: r8188eu: replace rtw_malloc/copy_from_user sequence with memdup_userIvan Safonov
memdup_user is shorter and expressively. Signed-off-by: Ivan Safonov <insafonov@gmail.com> Link: https://lore.kernel.org/r/20200412173716.846469-1-insafonov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13staging: vt6656: Remove unnecessary local variable initializationOscar Carter
Don't initialize the ret variable as it is set a few lines later. Signed-off-by: Oscar Carter <oscar.carter@gmx.com> Link: https://lore.kernel.org/r/20200411125104.9625-3-oscar.carter@gmx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13staging: vt6656: Remove duplicate code in vnt_vt3184_init functionOscar Carter
Remove duplicate code in "if" statements because different branches are almost the same. Signed-off-by: Oscar Carter <oscar.carter@gmx.com> Link: https://lore.kernel.org/r/20200411125104.9625-2-oscar.carter@gmx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13staging: vt6656: Remove unnecessary local variable initializationOscar Carter
Don't initialize the rate variable as it is set a few lines later. Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Oscar Carter <oscar.carter@gmx.com> Link: https://lore.kernel.org/r/20200407163915.7491-3-oscar.carter@gmx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13staging: vt6656: rxtx remove rate change and current_rate.Malcolm Priestley
There is no longer any need to change power in vnt_tx_packet. Remove current_rate in vnt_tx_packet and struct vnt_private as it is no longer used elsewhere. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Link: https://lore.kernel.org/r/3ba896aa-5ab2-affb-9ce5-7df8a9b3190a@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13staging: vt6556: vnt_rf_setpower convert to use ieee80211_channel.Malcolm Priestley
ieee80211_channel contains all the necessary information to change power according to tx mode required. vnt_rf_setpower is moved and so that vnt_rf_set_txpower the only caller becomes static. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Link: https://lore.kernel.org/r/9eab9af8-fde9-1dc6-fced-95c7a36ecc01@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13staging: vc04_services: remove set but not used 'local_entity_uc'Jason Yan
Fix the following gcc warning: drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c:2356:16: warning: variable ‘local_entity_uc’ set but not used [-Wunused-but-set-variable] int local_uc, local_entity_uc; ^~~~~~~~~~~~~~~ Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Link: https://lore.kernel.org/r/20200409085339.47255-1-yanaijie@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-07-16 14:23:08 +0000