| Age | Commit message (Collapse) | Author |
|---|
|
The Kconfig help text contains the phrase "the the" in the help
text. Fix this.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Maxim Mikityanskiy says:
====================
ethtool-netlink bug fixes
This series contains a few bug fixes for ethtool-netlink. These bugs are
specific for the netlink interface, and the legacy ioctl interface is
not affected. These patches aim to have the same behavior in
ethtool-netlink as in the legacy ethtool.
Please also see the sibling series for the userspace tool.
v2 changes: Added Fixes tags.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The legacy ethtool userspace tool shows an error when no features could
be changed. It's useful to have a netlink reply to be able to show this
error when __netdev_update_features wasn't called, for example:
1. ethtool -k eth0
large-receive-offload: off
2. ethtool -K eth0 rx-fcs on
3. ethtool -K eth0 lro on
Could not change any device features
rx-lro: off [requested on]
4. ethtool -K eth0 lro on
# The output should be the same, but without this patch the kernel
# doesn't send the reply, and ethtool is unable to detect the error.
This commit makes ethtool-netlink always return a reply when requested,
and it still avoids unnecessary calls to __netdev_update_features if the
wanted features haven't changed.
Fixes: 0980bfcd6954 ("ethtool: set netdev features with FEATURES_SET request")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ethtool-netlink ignores dev->hw_features and may confuse the drivers by
asking them to enable features not in the hw_features bitmask. For
example:
1. ethtool -k eth0
tls-hw-tx-offload: off [fixed]
2. ethtool -K eth0 tls-hw-tx-offload on
tls-hw-tx-offload: on
3. ethtool -k eth0
tls-hw-tx-offload: on [fixed]
Fitler out dev->hw_features from req_wanted to fix it and to resemble
the legacy ethtool behavior.
Fixes: 0980bfcd6954 ("ethtool: set netdev features with FEATURES_SET request")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, ethtool-netlink calculates new wanted bits as:
(req_wanted & req_mask) | (old_active & ~req_mask)
It completely discards the old wanted bits, so they are forgotten with
the next ethtool command. Sample steps to reproduce:
1. ethtool -k eth0
tx-tcp-segmentation: on # TSO is on from the beginning
2. ethtool -K eth0 tx off
tx-tcp-segmentation: off [not requested]
3. ethtool -k eth0
tx-tcp-segmentation: off [requested on]
4. ethtool -K eth0 rx off # Some change unrelated to TSO
5. ethtool -k eth0
tx-tcp-segmentation: off # "Wanted on" is forgotten
This commit fixes it by changing the formula to:
(req_wanted & req_mask) | (old_wanted & ~req_mask),
where old_active was replaced by old_wanted to account for the wanted
bits.
The shortcut condition for the case where nothing was changed now
compares wanted bitmasks, instead of wanted to active.
Fixes: 0980bfcd6954 ("ethtool: set netdev features with FEATURES_SET request")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch is to do 3 things for ipv6_dev_find():
As David A. noticed,
- rt6_lookup() is not really needed. Different from __ip_dev_find(),
ipv6_dev_find() doesn't have a compatibility problem, so remove it.
As Hideaki suggested,
- "valid" (non-tentative) check for the address is also needed.
ipv6_chk_addr() calls ipv6_chk_addr_and_flags(), which will
traverse the address hash list, but it's heavy to be called
inside ipv6_dev_find(). This patch is to reuse the code of
ipv6_chk_addr_and_flags() for ipv6_dev_find().
- dev parameter is passed into ipv6_dev_find(), as link-local
addresses from user space has sin6_scope_id set and the dev
lookup needs it.
Fixes: 81f6cb31222d ("ipv6: add ipv6_dev_find()")
Suggested-by: YOSHIFUJI Hideaki <hideaki.yoshifuji@miraclelinux.com>
Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the ARP monitor is used for link detection, ARP replies are
validated for all slaves (arp_validate=3) and fail_over_mac is set to
active, two slaves of an active-backup bond may get stuck in a state
where both of them are active and pass packets that they receive to
the bond. This state makes IPv6 duplicate address detection fail. The
state is reached thus:
1. The current active slave goes down because the ARP target
is not reachable.
2. The current ARP slave is chosen and made active.
3. A new slave is enslaved. This new slave becomes the current active
slave and can reach the ARP target.
As a result, the current ARP slave stays active after the enslave
action has finished and the log is littered with "PROBE BAD" messages:
> bond0: PROBE: c_arp ens10 && cas ens11 BAD
The workaround is to remove the slave with "going back" status from
the bond and re-enslave it. This issue was encountered when DPDK PMD
interfaces were being enslaved to an active-backup bond.
I would be possible to fix the issue in bond_enslave() or
bond_change_active_slave() but the ARP monitor was fixed instead to
keep most of the actions changing the current ARP slave in the ARP
monitor code. The current ARP slave is set as inactive and backup
during the commit phase. A new state, BOND_LINK_FAIL, has been
introduced for slaves in the context of the ARP monitor. This allows
administrators to see how slaves are rotated for sending ARP requests
and attempts are made to find a new active slave.
Fixes: b2220cad583c9 ("bonding: refactor ARP active-backup monitor")
Signed-off-by: Jiri Wiesner <jwiesner@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
pskb_carve_frag_list() may return -ENOMEM in pskb_carve_inside_nonlinear().
we should handle this correctly or we would get wrong sk_buff.
Fixes: 6fa01ccd8830 ("skbuff: Add pskb_extract() helper function")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
[Why&How]
pow(a,x) is implemented as exp(x*log(a)). log(0) will crash.
So return 0^x = 0, unless x=0, convention seems to be 0^0 = 1.
Cc: stable@vger.kernel.org
Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Programming is missing the sequence where for eDP the scrambling is
reset when testing for eye diagram test pattern.
[How]
Include the required register in the definition
Signed-off-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Wide timing DSC requires odm. Since spreadsheet is missing this dsc
validation we have to modify DML vba code ourselves.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Place the cursor in the center of screen between two pipes then
adjusting the viewport but cursour doesn't update cause DFPstate hang.
[How]
If viewport changed, update cursor as well.
Cc: stable@vger.kernel.org
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Reading for DP alt registers return incorrect values due to LE_SF
definition missing.
[How]
Define correct LE_SF or DP alt registers.
Signed-off-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
If DMUB is used, LVTMA VBIOS call can be used to control eDP instead of
tranditional transmitter control. Interface is agreed with VBIOS for
eDP to use this new path to program LVTMA registers.
[How]
Create DAL interface to send DMUB command for LVTMA as currently
implemented in VBIOS.
Signed-off-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Renoir only has one sdma instance, it will get failed once query the
sdma1 registers. So use switch-case instead of static register array.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use the same case as sienna_cichlid
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A bunch of fixes that came in for SPI during the merge window.
Some from ST and others for their controller, one from Lukas for a
race between device addition and controller unregistration and one
from fix from Geert for the DT bindings which unbreaks validation"
* tag 'spi-fix-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
dt-bindings: lpspi: Add missing boolean type for fsl,spi-only-use-cs1-sel
spi: stm32: always perform registers configuration prior to transfer
spi: stm32: fixes suspend/resume management
spi: stm32: fix stm32_spi_prepare_mbr in case of odd clk_rate
spi: stm32: fix fifo threshold level in case of short transfer
spi: stm32h7: fix race condition at end of transfer
spi: stm32: clear only asserted irq flags on interrupt
spi: Prevent adding devices below an unregistering controller
|
|
io_rw_prep_async() goes through a dance of clearing req->io, calling
the iovec import, then re-setting req->io. Provide an internal helper
that does the right thing without needing state tweaked to get there.
This enables further cleanups in io_read, io_write, and
io_resubmit_prep(), but that's left for another time.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When unloading driver by "modprobe -r amdgpu", one NULL pointer
dereference bug occurs in ras debugfs releasing. The cause is the
duplicated debugfs_remove, as drm debugfs_root dir has been cleaned
up already by drm_minor_unregister.
BUG: kernel NULL pointer dereference, address: 00000000000000a0
PGD 0 P4D 0
Oops: 0002 [#1] SMP PTI
CPU: 11 PID: 1526 Comm: modprobe Tainted: G OE 5.6.0-guchchen #1
Hardware name: System manufacturer System Product Name/TUF Z370-PLUS GAMING II, BIOS 0411 09/21/2018
RIP: 0010:down_write+0x15/0x40
Code: eb de e8 7e 17 72 ff cc cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 53 48 89 fb e8 92
d8 ff ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 13 75 0f 65 48 8b 04 25 c0 8b 01 00 48 89 43 08 5b c3
RSP: 0018:ffffb1590386fcd0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 00000000000000a0 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffffffff85b2fcc2 RDI: 00000000000000a0
RBP: ffffb1590386fd30 R08: ffffffff85b2fcc2 R09: 000000000002b3c0
R10: ffff97a330618c40 R11: 00000000000005f6 R12: ffff97a3481beb40
R13: 00000000000000a0 R14: ffff97a3481beb40 R15: 0000000000000000
FS: 00007fb11a717540(0000) GS:ffff97a376cc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000a0 CR3: 00000004066d6006 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
simple_recursive_removal+0x63/0x370
? debugfs_remove+0x60/0x60
debugfs_remove+0x40/0x60
amdgpu_ras_fini+0x82/0x230 [amdgpu]
? __kernfs_remove.part.17+0x101/0x1f0
? kernfs_name_hash+0x12/0x80
amdgpu_device_fini+0x1c0/0x580 [amdgpu]
amdgpu_driver_unload_kms+0x3e/0x70 [amdgpu]
amdgpu_pci_remove+0x36/0x60 [amdgpu]
pci_device_remove+0x3b/0xb0
device_release_driver_internal+0xe5/0x1c0
driver_detach+0x46/0x90
bus_remove_driver+0x58/0xd0
pci_unregister_driver+0x29/0x90
amdgpu_exit+0x11/0x25 [amdgpu]
__x64_sys_delete_module+0x13d/0x210
do_syscall_64+0x5f/0x250
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
when function arcturus_get_smu_metrics_data() call failed,
it will cause the variable "throttler_status" isn't initialized before use.
warning:
powerplay/arcturus_ppt.c:2268:24: warning: ‘throttler_status’ may be used uninitialized in this function [-Wmaybe-uninitialized]
2268 | if (throttler_status & logging_label[throttler_idx].feature_mask) {
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
gfxoff is temporarily disabled for navy_flounder,
since at present the feature has broken some basic
amdgpu test.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Every iteration of for_each_available_child_of_node() decrements
reference count of the previous node, however when control
is transferred from the middle of the loop, as in the case of
a return or break or goto, there is no decrement thus ultimately
resulting in a memory leak.
Fix a potential memory leak in gianfar.c by inserting of_node_put()
before the goto statement.
Issue found with Coccinelle.
Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Ganji Aravind says:
====================
cxgb4: Fix ethtool selftest flits calculation
Patch 1 will fix work request size calculation for loopback selftest.
Patch 2 will fix race between loopback selftest and normal Tx handler.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Even after Tx queues are marked stopped, there exists a
small window where the current packet in the normal Tx
path is still being sent out and loopback selftest ends
up corrupting the same Tx ring. So, ensure selftest takes
the Tx lock to synchronize access the Tx ring.
Fixes: 7235ffae3d2c ("cxgb4: add loopback ethtool self-test")
Signed-off-by: Ganji Aravind <ganji.aravind@chelsio.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Work request used for sending loopback packet needs to add
the firmware work request only once. So, fix by using
correct structure size.
Fixes: 7235ffae3d2c ("cxgb4: add loopback ethtool self-test")
Signed-off-by: Ganji Aravind <ganji.aravind@chelsio.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Edward Cree says:
====================
sfc: more EF100 fixes
Fix up some bugs in the initial EF100 submission, and re-fix
the hash_valid fix which was incomplete.
The reset bugs are currently hard to trigger; they were found
with an in-progress patch adding ethtool support, whereby
ethtool --reset reliably reproduces them.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If efx_nic_init_interrupt fails, or was never run (e.g. due to an earlier
failure in ef100_net_open), freeing irqs in efx_nic_fini_interrupt is not
needed and will cause error messages and stack traces.
So instead, only do this if efx_nic_init_interrupt successfully completed,
as indicated by the new efx->irqs_hooked flag.
Fixes: 965b549f3c20 ("sfc_ef100: implement ndo_open/close and EVQ probing")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If an ef100_net_open() fails, ef100_net_stop() may be called without
channel->rps_flow_id having been written; thus it may hold the address
freed by a previous ef100_net_stop()'s call to efx_remove_filters().
This then causes a double-free when efx_remove_filters() is called
again, leading to a panic.
To prevent this, after freeing it, overwrite it with NULL.
Fixes: a9dc3d5612ce ("sfc_ef100: RX filter table management and related gubbins")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When downing and upping the ef100 filter table, we need to take a write
lock on efx->filter_sem, not just a read lock, because we may kfree()
the table pointers.
Without this, resets cause a WARN_ON from efx_rwsem_assert_write_locked().
Fixes: a9dc3d5612ce ("sfc_ef100: RX filter table management and related gubbins")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Actually hook up the .rx_buf_hash_valid method in EF100's nic_type.
Fixes: 068885434ccb ("sfc: check hash is valid before using it")
Reported-by: Martin Habets <mhabets@solarflare.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remote source MAC addresses can be set on a 'source mode' macvlan
interface via the IFLA_MACVLAN_MACADDR_DATA attribute. This commit
tightens the validation of these MAC addresses to match the validation
already performed when setting or adding a single MAC address via the
IFLA_MACVLAN_MACADDR attribute.
iproute2 uses IFLA_MACVLAN_MACADDR_DATA for its 'macvlan macaddr set'
command, and IFLA_MACVLAN_MACADDR for its 'macvlan macaddr add' command,
which demonstrates the inconsistent behaviour that this commit
addresses:
# ip link add link eth0 name macvlan0 type macvlan mode source
# ip link set link dev macvlan0 type macvlan macaddr add 01:00:00:00:00:00
RTNETLINK answers: Cannot assign requested address
# ip link set link dev macvlan0 type macvlan macaddr set 01:00:00:00:00:00
# ip -d link show macvlan0
5: macvlan0@eth0: <BROADCAST,MULTICAST,DYNAMIC,UP,LOWER_UP> mtu 1500 ...
link/ether 2e:ac:fd:2d:69:f8 brd ff:ff:ff:ff:ff:ff promiscuity 0
macvlan mode source remotes (1) 01:00:00:00:00:00 numtxqueues 1 ...
With this change, the 'set' command will (rightly) fail in the same way
as the 'add' command.
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull ia64 page table fix from Mike Rapoport:
"Fix regression in IA-64 caused by page table allocation refactoring
The refactoring and consolidation of <asm/pgalloc.h> caused regression
on parisc and ia64. The fix for parisc made it into v5.9-rc1 while the
fix ia64 got delayed a bit and here it is"
* tag 'fixes-2020-08-18' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
arch/ia64: Restore arch-specific pgd_offset_k implementation
|
|
Recently we found regression when running will_it_scale/page_fault3 test
on ARM64. Over 70% down for the multi processes cases and over 20% down
for the multi threads cases. It turns out the regression is caused by
commit 89b15332af7c ("mm: drop mmap_sem before calling
balance_dirty_pages() in write fault").
The test mmaps a memory size file then write to the mapping, this would
make all memory dirty and trigger dirty pages throttle, that upstream
commit would release mmap_sem then retry the page fault. The retried
page fault would see correct PTEs installed then just fall through to
spurious TLB flush. The regression is caused by the excessive spurious
TLB flush. It is fine on x86 since x86's spurious TLB flush is no-op.
We could just skip the spurious TLB flush to mitigate the regression.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Xu Yu <xuyu@linux.alibaba.com>
Debugged-by: Xu Yu <xuyu@linux.alibaba.com>
Tested-by: Xu Yu <xuyu@linux.alibaba.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Yang Shi <shy828301@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Change to use fallthrough macro in switch case.
Signed-off-by: Shijie Luo <luoshijie1@huawei.com>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/20200810114435.24182-1-luoshijie1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The ext4_generic_delete_entry function does not use the parameter
handle, so it can be removed.
Signed-off-by: Kyoungho Koo <rnrudgh@gmail.com>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/20200810080701.GA14160@koo-Z370-HD3
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
seq_puts is a lot cheaper than seq_printf, so use that to print
literal strings.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/20200810022158.9167-1-vulab@iscas.ac.cn
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
It might be better to adjust the code in two places:
1. Determine whether grp is currupt or not should be placed first.
2. (cr<=2 && free <ac->ac_g_ex.fe_len)should may belong to the crx
strategy, and it may be more appropriate to put it in the
subsequent switch statement block. For cr1, cr2, the conditions
in switch potentially realize the above judgment. For cr0, we
should add (free <ac->ac_g_ex.fe_len) judgment, and then delete
(free / fragments) >= ac->ac_g_ex.fe_len), because cr0 returns
true by default.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/e20b2d8f-1154-adb7-3831-a9e11ba842e9@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
These comments do not seem to be related to ext4_mb_check_limits(),
it may be invalid.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/c49faf0c-d5d5-9c51-6911-9e0ff57c6bfa@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Fix typos in ext4_mb_regular_allocator() comment
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/d6514145-73b3-808b-ec5a-a8be27c51f9c@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
batadv_bla_send_claim() gets called from worker thread context through
batadv_bla_periodic_work(), thus netif_rx_ni needs to be used in that
case. This fixes "NOHZ: local_softirq_pending 08" log messages seen
when batman-adv is enabled.
Fixes: 23721387c409 ("batman-adv: add basic bridge loop avoidance code")
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@haltian.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
The own OGM check is currently misplaced and can lead to the following
issues:
For one thing we might receive an aggregated OGM from a neighbor node
which has our own OGM in the first place. We would then not only skip
our own OGM but erroneously also any other, following OGM in the
aggregate.
For another, we might receive an OGM aggregate which has our own OGM in
a place other then the first one. Then we would wrongly not skip this
OGM, leading to populating the orginator and gateway table with ourself.
Fixes: 9323158ef9f4 ("batman-adv: OGMv2 - implement originators logic")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
The gateway client code can try to optimize the delivery of DHCP packets to
avoid broadcasting them through the whole mesh. But also transmissions to
the client can be optimized by looking up the destination via the chaddr of
the DHCP packet.
But the chaddr is currently only done when chaddr is fully inside the
non-paged area of the skbuff. Otherwise it will not be initialized and the
unoptimized path should have been taken.
But the implementation didn't handle this correctly. It didn't retrieve the
correct chaddr but still tried to perform the TT lookup with this
uninitialized memory.
Reported-by: syzbot+ab16e463b903f5a37036@syzkaller.appspotmail.com
Fixes: 6c413b1c22a2 ("batman-adv: send every DHCP packet as bat-unicast")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
On ppc64le we get the following warning:
In file included from btf_dump.c:16:0:
btf_dump.c: In function ‘btf_dump_emit_struct_def’:
../include/linux/kernel.h:20:17: error: comparison of distinct pointer types lacks a cast [-Werror]
(void) (&_max1 == &_max2); \
^
btf_dump.c:882:11: note: in expansion of macro ‘max’
m_sz = max(0LL, btf__resolve_size(d->btf, m->type));
^~~
Fix by explicitly casting to __s64, which is a return type from
btf__resolve_size().
Fixes: 702eddc77a90 ("libbpf: Handle GCC built-in types for Arm NEON")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200818164456.1181661-1-andriin@fb.com
|
|
Use Shawn Guo's kernel.org address for the i.MX related bindings
as per the MAINTAINERS entries.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20200818111245.17047-1-festevam@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
There is a spelling mistake in a usnic_err error message. Fix it.
Link: https://lore.kernel.org/r/20200805141459.23069-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
There is a spelling mistake in a dev_dbg message. Fix it.
Link: https://lore.kernel.org/r/20200805141111.22804-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
IA32_MCG_STATUS.RIPV indicates whether the return RIP value pushed onto
the stack as part of machine check delivery is valid or not.
Various drivers copied a code fragment that uses the RIPV bit to
determine the severity of the error as either HW_EVENT_ERR_UNCORRECTED
or HW_EVENT_ERR_FATAL, but this check is reversed (marking errors where
RIPV is set as "FATAL").
Reverse the tests so that the error is marked fatal when RIPV is not set.
Reported-by: Gabriele Paoloni <gabriele.paoloni@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200707194324.14884-1-tony.luck@intel.com
|
|
This is not used at all.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
I do not know when ConfigInfoView::createStandardContextMenu() is
called.
Because QTextEdit::createStandardContextMenu() is not virtual,
ConfigInfoView::createStandardContextMenu() cannot override it.
Even if right-click the ConfigInfoView window, the "Show Debug Info"
menu does not show up.
Build up the menu in the constructor, and invoke it from the
contextMenuEvent().
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
If you right-click in the ConfigList window, you will see the following
messages in the console:
QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:888
QObject::connect: (sender name: 'config')
QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:897
QObject::connect: (sender name: 'config')
QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:906
QObject::connect: (sender name: 'config')
Right, there is no such slot in QAction. I think this is a typo of
setChecked.
Due to this bug, when you toggled the menu "Option->Show Name/Range/Data"
the state of the context menu was not previously updated. Fix this.
Fixes: d5d973c3f8a9 ("Port xconfig to Qt5 - Put back some of the old implementation(part 2)")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
