| Age | Commit message (Collapse) | Author |
|---|
|
conntrack mark based dump filtering may falsely skip entries if a mask
is given: If the mask-based check does not filter out the entry, the
else-if check is always true and compares the mark without considering
the mask. The if/else-if logic seems wrong.
Given that the mask during filter setup is implicitly set to 0xffffffff
if not specified explicitly, the mark filtering flags seem to just
complicate things. Restore the previously used approach by always
matching against a zero mask is no filter mark is given.
Fixes: cb8aa9a3affb ("netfilter: ctnetlink: add kernel side filtering for dump")
Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
On x86_64, each notification results in one skbuff allocation which
consumes at least 768 bytes due to the skbuff overhead.
This patch coalesces several notifications into one single skbuff, so
each notification consumes at least ~211 bytes, that ~3.5 times less
memory consumption. As a result, this is reducing the chances to exhaust
the netlink socket receive buffer.
Rule of thumb is that each notification batch only contains netlink
messages whose report flag is the same, nfnetlink_send() requires this
to do appropriate delivery to userspace, either via unicast (echo
mode) or multicast (monitor mode).
The skbuff control buffer is used to annotate the report flag for later
handling at the new coalescing routine.
The batch skbuff notification size is NLMSG_GOODSIZE, using a larger
skbuff would allow for more socket receiver buffer savings (to amortize
the cost of the skbuff even more), however, going over that size might
break userspace applications, so let's be conservative and stick to
NLMSG_GOODSIZE.
Reported-by: Phil Sutter <phil@nwl.cc>
Acked-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The indexes to the nf_nat_l[34]protos arrays come from userspace. So
check the tuple's family, e.g. l3num, when creating the conntrack in
order to prevent an OOB memory access during setup. Here is an example
kernel panic on 4.14.180 when userspace passes in an index greater than
NFPROTO_NUMPROTO.
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:...
Process poc (pid: 5614, stack limit = 0x00000000a3933121)
CPU: 4 PID: 5614 Comm: poc Tainted: G S W O 4.14.180-g051355490483
Hardware name: Qualcomm Technologies, Inc. SM8150 V2 PM8150 Google Inc. MSM
task: 000000002a3dfffe task.stack: 00000000a3933121
pc : __cfi_check_fail+0x1c/0x24
lr : __cfi_check_fail+0x1c/0x24
...
Call trace:
__cfi_check_fail+0x1c/0x24
name_to_dev_t+0x0/0x468
nfnetlink_parse_nat_setup+0x234/0x258
ctnetlink_parse_nat_setup+0x4c/0x228
ctnetlink_new_conntrack+0x590/0xc40
nfnetlink_rcv_msg+0x31c/0x4d4
netlink_rcv_skb+0x100/0x184
nfnetlink_rcv+0xf4/0x180
netlink_unicast+0x360/0x770
netlink_sendmsg+0x5a0/0x6a4
___sys_sendmsg+0x314/0x46c
SyS_sendmsg+0xb4/0x108
el0_svc_naked+0x34/0x38
This crash is not happening since 5.4+, however, ctnetlink still
allows for creating entries with unsupported layer 3 protocol number.
Fixes: c1d10adb4a521 ("[NETFILTER]: Add ctnetlink port for nf_conntrack")
Signed-off-by: Will McVicker <willmcvicker@google.com>
[pablo@netfilter.org: rebased original patch on top of nf.git]
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
mlx5_suspend()/resume() keep the network interface, so during hibernation
netvsc_unregister_vf() and netvsc_register_vf() are not called, and hence
netvsc_resume() should call netvsc_vf_changed() to switch the data path
back to the VF after hibernation. Note: after we close and re-open the
vmbus channel of the netvsc NIC in netvsc_suspend() and netvsc_resume(),
the data path is implicitly switched to the netvsc NIC. Similarly,
netvsc_suspend() should not call netvsc_unregister_vf(), otherwise the VF
can no longer be used after hibernation.
For mlx4, since the VF network interafce is explicitly destroyed and
re-created during hibernation (see mlx4_suspend()/resume()), hv_netvsc
already explicitly switches the data path from and to the VF automatically
via netvsc_register_vf() and netvsc_unregister_vf(), so mlx4 doesn't need
this fix. Note: mlx4 can still work with the fix because in
netvsc_suspend()/resume() ndev_ctx->vf_netdev is NULL for mlx4.
Fixes: 0efeea5fb153 ("hv_netvsc: Add the support of hibernation")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 8d7e5dee972f1cde2ba96c621f1541fa36e7d4f4.
To protect netns id, the nsid_lock is used when netns id is being
allocated and removed by peernet2id_alloc() and unhash_nsid().
The nsid_lock can be used in BH context but only spin_lock() is used
in this code.
Using spin_lock() instead of spin_lock_bh() can result in a deadlock in
the following scenario reported by the lockdep.
In order to avoid a deadlock, the spin_lock_bh() should be used instead
of spin_lock() to acquire nsid_lock.
Test commands:
ip netns del nst
ip netns add nst
ip link add veth1 type veth peer name veth2
ip link set veth1 netns nst
ip netns exec nst ip link add name br1 type bridge vlan_filtering 1
ip netns exec nst ip link set dev br1 up
ip netns exec nst ip link set dev veth1 master br1
ip netns exec nst ip link set dev veth1 up
ip netns exec nst ip link add macvlan0 link br1 up type macvlan
Splat looks like:
[ 33.615860][ T607] WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
[ 33.617194][ T607] 5.9.0-rc1+ #665 Not tainted
[ ... ]
[ 33.670615][ T607] Chain exists of:
[ 33.670615][ T607] &mc->mca_lock --> &bridge_netdev_addr_lock_key --> &net->nsid_lock
[ 33.670615][ T607]
[ 33.673118][ T607] Possible interrupt unsafe locking scenario:
[ 33.673118][ T607]
[ 33.674599][ T607] CPU0 CPU1
[ 33.675557][ T607] ---- ----
[ 33.676516][ T607] lock(&net->nsid_lock);
[ 33.677306][ T607] local_irq_disable();
[ 33.678517][ T607] lock(&mc->mca_lock);
[ 33.679725][ T607] lock(&bridge_netdev_addr_lock_key);
[ 33.681166][ T607] <Interrupt>
[ 33.681791][ T607] lock(&mc->mca_lock);
[ 33.682579][ T607]
[ 33.682579][ T607] *** DEADLOCK ***
[ ... ]
[ 33.922046][ T607] stack backtrace:
[ 33.922999][ T607] CPU: 3 PID: 607 Comm: ip Not tainted 5.9.0-rc1+ #665
[ 33.924099][ T607] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 33.925714][ T607] Call Trace:
[ 33.926238][ T607] dump_stack+0x78/0xab
[ 33.926905][ T607] check_irq_usage+0x70b/0x720
[ 33.927708][ T607] ? iterate_chain_key+0x60/0x60
[ 33.928507][ T607] ? check_path+0x22/0x40
[ 33.929201][ T607] ? check_noncircular+0xcf/0x180
[ 33.930024][ T607] ? __lock_acquire+0x1952/0x1f20
[ 33.930860][ T607] __lock_acquire+0x1952/0x1f20
[ 33.931667][ T607] lock_acquire+0xaf/0x3a0
[ 33.932366][ T607] ? peernet2id_alloc+0x3a/0x170
[ 33.933147][ T607] ? br_port_fill_attrs+0x54c/0x6b0 [bridge]
[ 33.934140][ T607] ? br_port_fill_attrs+0x5de/0x6b0 [bridge]
[ 33.935113][ T607] ? kvm_sched_clock_read+0x14/0x30
[ 33.935974][ T607] _raw_spin_lock+0x30/0x70
[ 33.936728][ T607] ? peernet2id_alloc+0x3a/0x170
[ 33.937523][ T607] peernet2id_alloc+0x3a/0x170
[ 33.938313][ T607] rtnl_fill_ifinfo+0xb5e/0x1400
[ 33.939091][ T607] rtmsg_ifinfo_build_skb+0x8a/0xf0
[ 33.939953][ T607] rtmsg_ifinfo_event.part.39+0x17/0x50
[ 33.940863][ T607] rtmsg_ifinfo+0x1f/0x30
[ 33.941571][ T607] __dev_notify_flags+0xa5/0xf0
[ 33.942376][ T607] ? __irq_work_queue_local+0x49/0x50
[ 33.943249][ T607] ? irq_work_queue+0x1d/0x30
[ 33.943993][ T607] ? __dev_set_promiscuity+0x7b/0x1a0
[ 33.944878][ T607] __dev_set_promiscuity+0x7b/0x1a0
[ 33.945758][ T607] dev_set_promiscuity+0x1e/0x50
[ 33.946582][ T607] br_port_set_promisc+0x1f/0x40 [bridge]
[ 33.947487][ T607] br_manage_promisc+0x8b/0xe0 [bridge]
[ 33.948388][ T607] __dev_set_promiscuity+0x123/0x1a0
[ 33.949244][ T607] __dev_set_rx_mode+0x68/0x90
[ 33.950021][ T607] dev_uc_add+0x50/0x60
[ 33.950720][ T607] macvlan_open+0x18e/0x1f0 [macvlan]
[ 33.951601][ T607] __dev_open+0xd6/0x170
[ 33.952269][ T607] __dev_change_flags+0x181/0x1d0
[ 33.953056][ T607] rtnl_configure_link+0x2f/0xa0
[ 33.953884][ T607] __rtnl_newlink+0x6b9/0x8e0
[ 33.954665][ T607] ? __lock_acquire+0x95d/0x1f20
[ 33.955450][ T607] ? lock_acquire+0xaf/0x3a0
[ 33.956193][ T607] ? is_bpf_text_address+0x5/0xe0
[ 33.956999][ T607] rtnl_newlink+0x47/0x70
Acked-by: Guillaume Nault <gnault@redhat.com>
Fixes: 8d7e5dee972f ("netns: don't disable BHs when locking "nsid_lock"")
Reported-by: syzbot+3f960c64a104eaa2c813@syzkaller.appspotmail.com
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Indentation and logic clearly show that this code is missing
parenthesis.
Fixes: 9f1345737790 ("ibmvnic fix NULL tx_pools and rx_tools issue at do_reset")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix kernel-doc warning in <linux/netdevice.h>:
../include/linux/netdevice.h:2158: warning: Function parameter or member 'xdp_state' not described in 'net_device'
Fixes: 7f0a838254bd ("bpf, xdp: Maintain info on attached XDP BPF programs in net_device")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix kernel-doc warning in <linux/netdevice.h>:
../include/linux/netdevice.h:2158: warning: Function parameter or member 'proto_down_reason' not described in 'net_device'
Fixes: 829eb208e80d ("rtnetlink: add support for protodown reason")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Michael Chan says:
====================
bnxt_en: Two bug fixes.
The first patch fixes AER recovery by reducing the time from several
minutes to a more reasonable 20 - 30 seconds. The second patch fixes
a possible NULL pointer crash during firmware reset.
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bnxt_fw_reset_task() which runs from a workqueue can race with
bnxt_remove_one(). For example, if firmware reset and VF FLR are
happening at about the same time.
bnxt_remove_one() already cancels the workqueue and waits for it
to finish, but we need to do this earlier before the devlink
reporters are destroyed. This will guarantee that
the devlink reporters will always be valid when bnxt_fw_reset_task()
is still running.
Fixes: b148bb238c02 ("bnxt_en: Fix possible crash in bnxt_fw_reset_task().")
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the driver goes through PCIe AER reset in error state, all
firmware messages will timeout because the PCIe bus is no longer
accessible. This can lead to AER reset taking many minutes to
complete as each firmware command takes time to timeout.
Define a new macro BNXT_NO_FW_ACCESS() to skip these firmware messages
when either firmware is in fatal error state or when
pci_channel_offline() is true. It now takes a more reasonable 20 to
30 seconds to complete AER recovery.
Fixes: b4fff2079d10 ("bnxt_en: Do not send firmware messages if firmware is in error state.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch causes a regression betwen Kernel 5.7 and 5.8 at wlcore:
with it applied, WiFi stops working, and the Kernel starts printing
this message every second:
wlcore: PHY firmware version: Rev 8.2.0.0.242
wlcore: firmware booted (Rev 8.9.0.0.79)
wlcore: ERROR command execute failure 14
------------[ cut here ]------------
WARNING: CPU: 0 PID: 133 at drivers/net/wireless/ti/wlcore/main.c:795 wl12xx_queue_recovery_work.part.0+0x6c/0x74 [wlcore]
Modules linked in: wl18xx wlcore mac80211 libarc4 cfg80211 rfkill snd_soc_hdmi_codec crct10dif_ce wlcore_sdio adv7511 cec kirin9xx_drm(C) kirin9xx_dw_drm_dsi(C) drm_kms_helper drm ip_tables x_tables ipv6 nf_defrag_ipv6
CPU: 0 PID: 133 Comm: kworker/0:1 Tainted: G WC 5.8.0+ #186
Hardware name: HiKey970 (DT)
Workqueue: events_freezable ieee80211_restart_work [mac80211]
pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--)
pc : wl12xx_queue_recovery_work.part.0+0x6c/0x74 [wlcore]
lr : wl12xx_queue_recovery_work+0x24/0x30 [wlcore]
sp : ffff8000126c3a60
x29: ffff8000126c3a60 x28: 00000000000025de
x27: 0000000000000010 x26: 0000000000000005
x25: ffff0001a5d49e80 x24: ffff8000092cf580
x23: ffff0001b7c12623 x22: ffff0001b6fcf2e8
x21: ffff0001b7e46200 x20: 00000000fffffffb
x19: ffff0001a78e6400 x18: 0000000000000030
x17: 0000000000000001 x16: 0000000000000001
x15: ffff0001b7e46670 x14: ffffffffffffffff
x13: ffff8000926c37d7 x12: ffff8000126c37e0
x11: ffff800011e01000 x10: ffff8000120526d0
x9 : 0000000000000000 x8 : 3431206572756c69
x7 : 6166206574756365 x6 : 0000000000000c2c
x5 : 0000000000000000 x4 : ffff0001bf1361e8
x3 : ffff0001bf1790b0 x2 : 0000000000000000
x1 : ffff0001a5d49e80 x0 : 0000000000000001
Call trace:
wl12xx_queue_recovery_work.part.0+0x6c/0x74 [wlcore]
wl12xx_queue_recovery_work+0x24/0x30 [wlcore]
wl1271_cmd_set_sta_key+0x258/0x25c [wlcore]
wl1271_set_key+0x7c/0x2dc [wlcore]
wlcore_set_key+0xe4/0x360 [wlcore]
wl18xx_set_key+0x48/0x1d0 [wl18xx]
wlcore_op_set_key+0xa4/0x180 [wlcore]
ieee80211_key_enable_hw_accel+0xb0/0x2d0 [mac80211]
ieee80211_reenable_keys+0x70/0x110 [mac80211]
ieee80211_reconfig+0xa00/0xca0 [mac80211]
ieee80211_restart_work+0xc4/0xfc [mac80211]
process_one_work+0x1cc/0x350
worker_thread+0x13c/0x470
kthread+0x154/0x160
ret_from_fork+0x10/0x30
---[ end trace b1f722abf9af5919 ]---
wlcore: WARNING could not set keys
wlcore: ERROR Could not add or replace key
wlan0: failed to set key (4, ff:ff:ff:ff:ff:ff) to hardware (-5)
wlcore: Hardware recovery in progress. FW ver: Rev 8.9.0.0.79
wlcore: pc: 0x0, hint_sts: 0x00000040 count: 39
wlcore: down
wlcore: down
ieee80211 phy0: Hardware restart was requested
mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
mmc_host mmc0: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
wlcore: PHY firmware version: Rev 8.2.0.0.242
wlcore: firmware booted (Rev 8.9.0.0.79)
wlcore: ERROR command execute failure 14
------------[ cut here ]------------
Tested on Hikey 970.
This reverts commit 2b7aadd3b9e17e8b81eeb8d9cc46756ae4658265.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/f0a2cb7ea606f1a284d4c23cbf983da2954ce9b6.1598420968.git.mchehab+huawei@kernel.org
|
|
When removing a port from a VLAN we are just erasing the
member config for the VLAN, which is wrong: other ports
can be using it.
Just mask off the port and only zero out the rest of the
member config once ports using of the VLAN are removed
from it.
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
PAE bit of NCFGR register, when set, pauses transmission
if a non-zero 802.3 classic pause frame is received.
Fixes: 7897b071ac3b ("net: macb: convert to phylink")
Signed-off-by: Parshuram Thombare <pthombar@cadence.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pass the correct offset to clear the stale filter hit
bytes counter. Otherwise, the counter starts incrementing
from the stale information, instead of 0.
Fixes: 12b276fbf6e0 ("cxgb4: add support to create hash filters")
Signed-off-by: Ganji Aravind <ganji.aravind@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Luo bin says:
====================
hinic: BugFixes
The bugs fixed in this patchset have been present since the following
commits:
patch #1: Fixes: 00e57a6d4ad3 ("net-next/hinic: Add Tx operation")
patch #2: Fixes: 5e126e7c4e52 ("hinic: add firmware update support")
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Firmware erases the entire flash region which may take several
seconds before flashing, so we bump up the timeout to ensure this
cmd won't return failure.
Fixes: 5e126e7c4e52 ("hinic: add firmware update support")
Signed-off-by: Luo bin <luobin9@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We free memory regardless of the return value of SET_FUNC_STATE
cmd in hinic_close function to avoid memory leak and this cmd may
timeout when fw is busy with handling other cmds, so we bump up the
timeout of this cmd to ensure it won't return failure.
Fixes: 00e57a6d4ad3 ("net-next/hinic: Add Tx operation")
Signed-off-by: Luo bin <luobin9@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The following deadlock scenario is triggered by syzbot:
Thread A: Thread B:
tcf_idr_check_alloc()
...
populate_metalist()
rtnl_unlock()
rtnl_lock()
...
request_module() tcf_idr_check_alloc()
rtnl_lock()
At this point, thread A is waiting for thread B to release RTNL
lock, while thread B is waiting for thread A to commit the IDR
change with tcf_idr_insert() later.
Break this deadlock situation by preloading ife modules earlier,
before tcf_idr_check_alloc(), this is fine because we only need
to load modules we need potentially.
Reported-and-tested-by: syzbot+80e32b5d1f9923f8ace6@syzkaller.appspotmail.com
Fixes: 0190c1d452a9 ("net: sched: atomically check-allocate action")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Vlad Buslov <vladbu@mellanox.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
eni_init_one() misses to call pci_disable_device() in an error path.
Jump to err_disable to fix it.
Fixes: ede58ef28e10 ("atm: remove deprecated use of pci api")
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
PVC devices are virtual devices in this driver stacked on top of the
actual HDLC device. They are the devices normal users would use.
PVC devices have two types: normal PVC devices and Ethernet-emulating
PVC devices.
When transmitting data with PVC devices, the ndo_start_xmit function
will prepend a header of 4 or 10 bytes. Currently this driver requests
this headroom to be reserved for normal PVC devices by setting their
hard_header_len to 10. However, this does not work when these devices
are used with AF_PACKET/RAW sockets. Also, this driver does not request
this headroom for Ethernet-emulating PVC devices (but deals with this
problem by reallocating the skb when needed, which is not optimal).
This patch replaces hard_header_len with needed_headroom, and set
needed_headroom for Ethernet-emulating PVC devices, too. This makes
the driver to request headroom for all PVC devices in all cases.
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix GENERIC_LOCKBREAK dependency on PREEMPTION in Kconfig broken
because of a typo
- Update defconfigs
* tag 's390-5.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: update defconfigs
s390: fix GENERIC_LOCKBREAK dependency typo in Kconfig
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Fix the loading of modules built with binutils-2.35. This version
produces writable and executable .text.ftrace_trampoline section
which is rejected by the kernel.
- Remove the exporting of cpu_logical_map() as the Tegra driver has now
been fixed and no longer uses this function.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/module: set trampoline section flags regardless of CONFIG_DYNAMIC_FTRACE
arm64: Remove exporting cpu_logical_map symbol
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
"A few MIPS fixes:
- fallthrough fallout fix
- BMIPS fixes
- MSA fix to avoid leaking MSA register contents
- Loongson perf and cpu feature fix
- SNI interrupt fix"
* tag 'mips_fixes_5.9_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: SNI: Fix SCSI interrupt
MIPS: add missing MSACSR and upper MSA initialization
MIPS: perf: Fix wrong check condition of Loongson event IDs
mips/oprofile: Fix fallthrough placement
MIPS: Loongson64: Remove unnecessary inclusion of boot_param.h
MIPS: BMIPS: Also call bmips_cpu_setup() for secondary cores
MIPS: mm: BMIPS5000 has inclusive physical caches
MIPS: Loongson64: Do not override watch and ejtag feature
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- fix documents
- fix warning in 'make localmodconfig'
* tag 'kbuild-fixes-v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: remove redundant assignment prompt = prompt
kbuild: Documentation: clean up makefiles.rst
kconfig: streamline_config.pl: check defined(ENV variable) before using it
Documentation/llvm: Improve formatting of commands, variables, and arguments
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix reference counting in the operating performance points (OPP)
framework and address a few intel_pstate driver issues, mostly related
to switching driver operation modes and similar with hardware-managed
P-states (HWP) enabled.
Specifics:
- Fix reference counting of operating performance points (OPP) tables
(Viresh Kumar).
- Address intel_pstate driver interface issues, mostly related to
switching operation modes and handling CPU offline and online and
system-wide suspend/resume with hardware-managed P-states (HWP)
enabled (Rafael Wysocki).
- Fix the maximum frequency computation in the intel_pstate driver
with turbo P-states disabled by the platform firmware and HWP
enabled (Francisco Jerez)"
* tag 'pm-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Fix intel_pstate_get_hwp_max() for turbo disabled
cpufreq: intel_pstate: Free memory only when turning off
cpufreq: intel_pstate: Add ->offline and ->online callbacks
cpufreq: intel_pstate: Tweak the EPP sysfs interface
cpufreq: intel_pstate: Update cached EPP in the active mode
cpufreq: intel_pstate: Refuse to turn off with HWP enabled
opp: Don't drop reference for an OPP table that was never parsed
|
|
Pull libata fixes from Jens Axboe:
- improve Sandisks ATA_HORKAGE on NCQ (Tejun)
- link printk cleanup (Xu)
* tag 'libata-5.9-2020-09-04' of git://git.kernel.dk/linux-block:
libata: implement ATA_HORKAGE_MAX_TRIM_128M and apply to Sandisks
ata: ahci: use ata_link_info() instead of ata_link_printk()
|
|
Pull block fixes from Jens Axboe:
"A bit larger than usual this week, mostly due to the NVMe fixes
arriving late for -rc3 and hence didn't make last weeks pull request.
- NVMe:
- instance leak and io boundary fixes from Keith
- fc locking fix from Christophe
- various tcp/rdma reset during traffic fixes from Sagi
- pci use-after-free fix from Tong
- tcp target null deref fix from Ziye
- Locking fix for partition removal (Christoph)
- Ensure bdi->io_pages is always set (me)
- Fixup for hd struct reference (Ming)
- Fix for zero length bvecs (Ming)
- Two small blk-iocost fixes (Tejun)"
* tag 'block-5.9-2020-09-04' of git://git.kernel.dk/linux-block:
block: allow for_each_bvec to support zero len bvec
blk-stat: make q->stats->lock irqsafe
blk-iocost: ioc_pd_free() shouldn't assume irq disabled
block: fix locking in bdev_del_partition
block: release disk reference in hd_struct_free_work
block: ensure bdi->io_pages is always initialized
nvme-pci: cancel nvme device request before disabling
nvme: only use power of two io boundaries
nvme: fix controller instance leak
nvmet-fc: Fix a missed _irqsave version of spin_lock in 'nvmet_fc_fod_op_done()'
nvme: Fix NULL dereference for pci nvme controllers
nvme-rdma: fix reset hang if controller died in the middle of a reset
nvme-rdma: fix timeout handler
nvme-rdma: serialize controller teardown sequences
nvme-tcp: fix reset hang if controller died in the middle of a reset
nvme-tcp: fix timeout handler
nvme-tcp: serialize controller teardown sequences
nvme: have nvme_wait_freeze_timeout return if it timed out
nvme-fabrics: don't check state NVME_CTRL_NEW for request acceptance
nvmet-tcp: Fix NULL dereference when a connect data comes in h2cdata pdu
|
|
Pull io_uring fixes from Jens Axboe:
- EAGAIN with O_NONBLOCK retry fix
- Two small fixes for registered files (Jiufei)
* tag 'io_uring-5.9-2020-09-04' of git://git.kernel.dk/linux-block:
io_uring: no read/write-retry on -EAGAIN error and O_NONBLOCK marked file
io_uring: set table->files[i] to NULL when io_sqe_file_register failed
io_uring: fix removing the wrong file in __io_sqe_files_update()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal fixes from Daniel Lezcano:
- Fix bogus thermal shutdowns for omap4430 where bogus values resulting
from an incorrect ADC conversion are too high and fire an emergency
shutdown (Tony Lindgren)
- Don't suppress negative temp for qcom spmi as they are valid and
userspace needs them (Veera Vegivada)
- Fix use-after-free in thermal_zone_device_unregister reported by
Kasan (Dmitry Osipenko)
* tag 'thermal-v5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal: core: Fix use-after-free in thermal_zone_device_unregister()
thermal: qcom-spmi-temp-alarm: Don't suppress negative temp
thermal: ti-soc-thermal: Fix bogus thermal shutdowns for omap4430
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
"A couple of core fixes and odd driver fixes for dmaengine subsystem:
Core:
- drop ACPI CSRT table reference after using it
- fix of_dma_router_xlate() error handling
Drivers fixes in idxd, at_hdmac, pl330, dw-edma and jz478"
* tag 'dmaengine-fix-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: ti: k3-udma: Update rchan_oes_offset for am654 SYSFW ABI 3.0
drivers/dma/dma-jz4780: Fix race condition between probe and irq handler
dmaengine: dw-edma: Fix scatter-gather address calculation
dmaengine: ti: k3-udma: Fix the TR initialization for prep_slave_sg
dmaengine: pl330: Fix burst length if burst size is smaller than bus width
dmaengine: at_hdmac: add missing kfree() call in at_dma_xlate()
dmaengine: at_hdmac: add missing put_device() call in at_dma_xlate()
dmaengine: at_hdmac: check return value of of_find_device_by_node() in at_dma_xlate()
dmaengine: of-dma: Fix of_dma_router_xlate's of_dma_xlate handling
dmaengine: idxd: reset states after device disable or reset
dmaengine: acpi: Put the CSRT table after using it
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small changes, nothing intrusive:
- remaining tasklet API conversions, now all sound stuff have been
converted
- a few HD-audio and USB-audio quirks and minor fixes
- FireWire Tascam and Digi00xx fixes
- drop a kernel WARNING from PCM OSS for syzkaller"
* tag 'sound-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (29 commits)
ALSA: hda/realtek - Improved routing for Thinkpad X1 7th/8th Gen
ALSA: hda: use consistent HDAudio spelling in comments/docs
ALSA: hda: add dev_dbg log when driver is not selected
ALSA: hda: fix a runtime pm issue in SOF when integrated GPU is disabled
ALSA: hda: hdmi - add Rocketlake support
ALSA: ua101: convert tasklets to use new tasklet_setup() API
ALSA: usb-audio: convert tasklets to use new tasklet_setup() API
ASoC: txx9: convert tasklets to use new tasklet_setup() API
ASoC: siu: convert tasklets to use new tasklet_setup() API
ASoC: fsl_esai: convert tasklets to use new tasklet_setup() API
ALSA: hdsp: convert tasklets to use new tasklet_setup() API
ALSA: riptide: convert tasklets to use new tasklet_setup() API
ALSA: pci/asihpi: convert tasklets to use new tasklet_setup() API
ALSA: firewire: convert tasklets to use new tasklet_setup() API
ALSA: core: convert tasklets to use new tasklet_setup() API
ALSA: pcm: oss: Remove superfluous WARN_ON() for mulaw sanity check
ALSA: hda - Fix silent audio output and corrupted input on MSI X570-A PRO
ALSA: hda/hdmi: always check pin power status in i915 pin fixup
ALSA: hda/realtek: Add quirk for Samsung Galaxy Book Ion NT950XCJ-X716A
ALSA: usb-audio: Add basic capture support for Pioneer DJ DJM-250MK2
...
|
|
Pull drm fixes from Dave Airlie:
"Not much going on this week, nouveau has a display hw bug workaround,
amdgpu has some PM fixes and CIK regression fixes, one single radeon
PLL fix, and a couple of i915 display fixes.
amdgpu:
- Fix for 32bit systems
- SW CTF fix
- Update for Sienna Cichlid
- CIK bug fixes
radeon:
- PLL fix
i915:
- Clang build warning fix
- HDCP fixes
nouveau:
- display fixes"
* tag 'drm-fixes-2020-09-04' of git://anongit.freedesktop.org/drm/drm:
drm/nouveau/kms/nv50-gp1xx: add WAR for EVO push buffer HW bug
drm/nouveau/kms/nv50-gp1xx: disable notifies again after core update
drm/nouveau/kms/nv50-: add some whitespace before debug message
drm/nouveau/kms/gv100-: Include correct push header in crcc37d.c
drm/radeon: Prefer lower feedback dividers
drm/amdgpu: Fix bug in reporting voltage for CIK
drm/amdgpu: Specify get_argument function for ci_smu_funcs
drm/amd/pm: enable MP0 DPM for sienna_cichlid
drm/amd/pm: avoid false alarm due to confusing softwareshutdowntemp setting
drm/amd/pm: fix is_dpm_running() run error on 32bit system
drm/i915: Clear the repeater bit on HDCP disable
drm/i915: Fix sha_text population code
drm/i915/display: Ensure that ret is always initialized in icl_combo_phy_verify_state
|
|
Using tp_reserve to calculate netoff can overflow as
tp_reserve is unsigned int and netoff is unsigned short.
This may lead to macoff receving a smaller value then
sizeof(struct virtio_net_hdr), and if po->has_vnet_hdr
is set, an out-of-bounds write will occur when
calling virtio_net_hdr_from_skb.
The bug is fixed by converting netoff to unsigned int
and checking if it exceeds USHRT_MAX.
This addresses CVE-2020-14386
Fixes: 8913336a7e8d ("packet: add PACKET_RESERVE sockopt")
Signed-off-by: Or Cohen <orcohen@paloaltonetworks.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Merge emailed patches from Peter Xu:
"This is a small series that I picked up from Linus's suggestion to
simplify cow handling (and also make it more strict) by checking
against page refcounts rather than mapcounts.
This makes uffd-wp work again (verified by running upmapsort)"
Note: this is horrendously bad timing, and making this kind of
fundamental vm change after -rc3 is not at all how things should work.
The saving grace is that it really is a a nice simplification:
8 files changed, 29 insertions(+), 120 deletions(-)
The reason for the bad timing is that it turns out that commit
17839856fd58 ("gup: document and work around 'COW can break either way'
issue" broke not just UFFD functionality (as Peter noticed), but Mikulas
Patocka also reports that it caused issues for strace when running in a
DAX environment with ext4 on a persistent memory setup.
And we can't just revert that commit without re-introducing the original
issue that is a potential security hole, so making COW stricter (and in
the process much simpler) is a step to then undoing the forced COW that
broke other uses.
Link: https://lore.kernel.org/lkml/alpine.LRH.2.02.2009031328040.6929@file01.intranet.prod.int.rdu2.redhat.com/
* emailed patches from Peter Xu <peterx@redhat.com>:
mm: Add PGREUSE counter
mm/gup: Remove enfornced COW mechanism
mm/ksm: Remove reuse_ksm_page()
mm: do_wp_page() simplification
|
|
* pm-cpufreq:
cpufreq: intel_pstate: Fix intel_pstate_get_hwp_max() for turbo disabled
cpufreq: intel_pstate: Free memory only when turning off
cpufreq: intel_pstate: Add ->offline and ->online callbacks
cpufreq: intel_pstate: Tweak the EPP sysfs interface
cpufreq: intel_pstate: Update cached EPP in the active mode
cpufreq: intel_pstate: Refuse to turn off with HWP enabled
|
|
This accounts for wp_page_reuse() case, where we reused a page for COW.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
With the more strict (but greatly simplified) page reuse logic in
do_wp_page(), we can safely go back to the world where cow is not
enforced with writes.
This essentially reverts commit 17839856fd58 ("gup: document and work
around 'COW can break either way' issue"). There are some context
differences due to some changes later on around it:
2170ecfa7688 ("drm/i915: convert get_user_pages() --> pin_user_pages()", 2020-06-03)
376a34efa4ee ("mm/gup: refactor and de-duplicate gup_fast() code", 2020-06-03)
Some lines moved back and forth with those, but this revert patch should
have striped out and covered all the enforced cow bits anyways.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Remove the function as the last reference has gone away with the do_wp_page()
changes.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
How about we just make sure we're the only possible valid user fo the
page before we bother to reuse it?
Simplify, simplify, simplify.
And get rid of the nasty serialization on the page lock at the same time.
[peterx: add subject prefix]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
GCOV built with GCC 10 doesn't initialize n_function variable. This
produces different kernel panics as was seen by Colin in Ubuntu and me
in FC 32.
As a workaround, let's disable GCOV build for broken GCC 10 version.
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1891288
Link: https://lore.kernel.org/lkml/20200827133932.3338519-1-leon@kernel.org
Link: https://lore.kernel.org/lkml/CAHk-=whbijeSdSvx-Xcr0DPMj0BiwhJ+uiNnDSVZcr_h_kg7UA@mail.gmail.com/
Cc: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
init_stat() returns 0 on success, same as vfs_lstat(). When it replaced
vfs_lstat(), the '!' was dropped.
Fixes: 716308a5331b ("init: add an init_stat helper")
Signed-off-by: Barret Rhoden <brho@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The user-after-free bug in thermal_zone_device_unregister() is reported by
KASAN. It happens because struct thermal_zone_device is released during of
device_unregister() invocation, and hence the "tz" variable shouldn't be
touched by thermal_notify_tz_delete(tz->id).
Fixes: 55cdf0a283b8 ("thermal: core: Add notifications call in the framework")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200817235854.26816-1-digetx@gmail.com
|
|
Currently driver is suppressing the negative temperature
readings from the vadc. Consumers of the thermal zones need
to read the negative temperature too. Don't suppress the
readings.
Fixes: c610afaa21d3c6e ("thermal: Add QPNP PMIC temperature alarm driver")
Signed-off-by: Veera Vegivada <vvegivad@codeaurora.org>
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/944856eb819081268fab783236a916257de120e4.1596040416.git.gurus@codeaurora.org
|
|
We can sometimes get bogus thermal shutdowns on omap4430 at least with
droid4 running idle with a battery charger connected:
thermal thermal_zone0: critical temperature reached (143 C), shutting down
Dumping out the register values shows we can occasionally get a 0x7f value
that is outside the TRM listed values in the ADC conversion table. And then
we get a normal value when reading again after that. Reading the register
multiple times does not seem help avoiding the bogus values as they stay
until the next sample is ready.
Looking at the TRM chapter "18.4.10.2.3 ADC Codes Versus Temperature", we
should have values from 13 to 107 listed with a total of 95 values. But
looking at the omap4430_adc_to_temp array, the values are off, and the
end values are missing. And it seems that the 4430 ADC table is similar
to omap3630 rather than omap4460.
Let's fix the issue by using values based on the omap3630 table and just
ignoring invalid values. Compared to the 4430 TRM, the omap3630 table has
the missing values added while the TRM table only shows every second
value.
Note that sometimes the ADC register values within the valid table can
also be way off for about 1 out of 10 values. But it seems that those
just show about 25 C too low values rather than too high values. So those
do not cause a bogus thermal shutdown.
Fixes: 1a31270e54d7 ("staging: omap-thermal: add OMAP4 data structures")
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200706183338.25622-1-tony@atomide.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tools fixes from Arnaldo Carvalho de Melo:
- Use uintptr_t when casting numbers to pointers
- Keep output expected by 3rd parties: Turn off summary for interval
mode by default.
- BPF is in kernel space, make sure do_validate_kcore_modules() knows
about that.
- Explicitly call out event modifiers in the documentation.
- Fix jevents() allocation of space for regular expressions.
- Address libtraceevent build warnings on 32-bit arches.
- Fix checking of functions returns using ERR_PTR() in 'perf bench'.
* tag 'perf-tools-fixes-for-v5.9-2020-09-03' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf tools: Add bpf image check to __map__is_kmodule
perf record/stat: Explicitly call out event modifiers in the documentation
perf bench: The do_run_multi_threaded() function must use IS_ERR(perf_session__new())
perf stat: Turn off summary for interval mode by default
libtraceevent: Fix build warning on 32-bit arches
perf jevents: Fix suspicious code in fixregex()
perf parse-events: Use uintptr_t when casting numbers to pointers
|
|
Pull networking fixes from David Miller:
1) Use netif_rx_ni() when necessary in batman-adv stack, from Jussi
Kivilinna.
2) Fix loss of RTT samples in rxrpc, from David Howells.
3) Memory leak in hns_nic_dev_probe(), from Dignhao Liu.
4) ravb module cannot be unloaded, fix from Yuusuke Ashizuka.
5) We disable BH for too lokng in sctp_get_port_local(), add a
cond_resched() here as well, from Xin Long.
6) Fix memory leak in st95hf_in_send_cmd, from Dinghao Liu.
7) Out of bound access in bpf_raw_tp_link_fill_link_info(), from
Yonghong Song.
8) Missing of_node_put() in mt7530 DSA driver, from Sumera
Priyadarsini.
9) Fix crash in bnxt_fw_reset_task(), from Michael Chan.
10) Fix geneve tunnel checksumming bug in hns3, from Yi Li.
11) Memory leak in rxkad_verify_response, from Dinghao Liu.
12) In tipc, don't use smp_processor_id() in preemptible context. From
Tuong Lien.
13) Fix signedness issue in mlx4 memory allocation, from Shung-Hsi Yu.
14) Missing clk_disable_prepare() in gemini driver, from Dan Carpenter.
15) Fix ABI mismatch between driver and firmware in nfp, from Louis
Peens.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (110 commits)
net/smc: fix sock refcounting in case of termination
net/smc: reset sndbuf_desc if freed
net/smc: set rx_off for SMCR explicitly
net/smc: fix toleration of fake add_link messages
tg3: Fix soft lockup when tg3_reset_task() fails.
doc: net: dsa: Fix typo in config code sample
net: dp83867: Fix WoL SecureOn password
nfp: flower: fix ABI mismatch between driver and firmware
tipc: fix shutdown() of connectionless socket
ipv6: Fix sysctl max for fib_multipath_hash_policy
drivers/net/wan/hdlc: Change the default of hard_header_len to 0
net: gemini: Fix another missing clk_disable_unprepare() in probe
net: bcmgenet: fix mask check in bcmgenet_validate_flow()
amd-xgbe: Add support for new port mode
net: usb: dm9601: Add USB ID of Keenetic Plus DSL
vhost: fix typo in error message
net: ethernet: mlx4: Fix memory allocation in mlx4_buddy_init()
pktgen: fix error message with wrong function name
net: ethernet: ti: am65-cpsw: fix rmii 100Mbit link mode
cxgb4: fix thermal zone device registration
...
|
|
Merge gate page refcount fix from Dave Hansen:
"During the conversion over to pin_user_pages(), gate pages were missed.
The fix is pretty simple, and is accompanied by a new test from Andy
which probably would have caught this earlier"
* emailed patches from Dave Hansen <dave.hansen@linux.intel.com>:
selftests/x86/test_vsyscall: Improve the process_vm_readv() test
mm: fix pin vs. gup mismatch with gate pages
|
|
The existing code accepted process_vm_readv() success or failure as long
as it didn't return garbage. This is too weak: if the vsyscall page is
readable, then process_vm_readv() should succeed and, if the page is not
readable, then it should fail.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Gate pages were missed when converting from get to pin_user_pages().
This can lead to refcount imbalances. This is reliably and quickly
reproducible running the x86 selftests when vsyscall=emulate is enabled
(the default). Fix by using try_grab_page() with appropriate flags
passed.
The long story:
Today, pin_user_pages() and get_user_pages() are similar interfaces for
manipulating page reference counts. However, "pins" use a "bias" value
and manipulate the actual reference count by 1024 instead of 1 used by
plain "gets".
That means that pin_user_pages() must be matched with unpin_user_pages()
and can't be mixed with a plain put_user_pages() or put_page().
Enter gate pages, like the vsyscall page. They are pages usually in the
kernel image, but which are mapped to userspace. Userspace is allowed
access to them, including interfaces using get/pin_user_pages(). The
refcount of these kernel pages is manipulated just like a normal user
page on the get/pin side so that the put/unpin side can work the same
for normal user pages or gate pages.
get_gate_page() uses try_get_page() which only bumps the refcount by
1, not 1024, even if called in the pin_user_pages() path. If someone
pins a gate page, this happens:
pin_user_pages()
get_gate_page()
try_get_page() // bump refcount +1
... some time later
unpin_user_pages()
page_ref_sub_and_test(page, 1024))
... and boom, we get a refcount off by 1023. This is reliably and
quickly reproducible running the x86 selftests when booted with
vsyscall=emulate (the default). The selftests use ptrace(), but I
suspect anything using pin_user_pages() on gate pages could hit this.
To fix it, simply use try_grab_page() instead of try_get_page(), and
pass 'gup_flags' in so that FOLL_PIN can be respected.
This bug traces back to the very beginning of the FOLL_PIN support in
commit 3faa52c03f44 ("mm/gup: track FOLL_PIN pages"), which showed up in
the 5.7 release.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Fixes: 3faa52c03f44 ("mm/gup: track FOLL_PIN pages")
Reported-by: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: x86@kernel.org
Cc: Jann Horn <jannh@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
