summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-09-04mmc: sdhci-esdhc: break out early if clock is 0Shawn Guo
Since commit 30832ab56 ("mmc: sdhci: Always pass clock request value zero to set_clock host op") was merged, esdhc_set_clock starts hitting "if (clock == 0)" where ESDHC_SYSTEM_CONTROL has been operated. This causes SDHCI card-detection function being broken. Fix the regression by moving "if (clock == 0)" above ESDHC_SYSTEM_CONTROL operation. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-09-04mmc: mxs-mmc: fix deadlock caused by recursion loopLauri Hintsala
Release the lock before mmc_signal_sdio_irq is called by mxs_mmc_enable_sdio_irq. Backtrace: [ 65.470000] ============================================= [ 65.470000] [ INFO: possible recursive locking detected ] [ 65.470000] 3.5.0-rc5 #2 Not tainted [ 65.470000] --------------------------------------------- [ 65.470000] ksdioirqd/mmc0/73 is trying to acquire lock: [ 65.470000] (&(&host->lock)->rlock#2){-.-...}, at: [<bf054120>] mxs_mmc_enable_sdio_irq+0x18/0xdc [mxs_mmc] [ 65.470000] [ 65.470000] but task is already holding lock: [ 65.470000] (&(&host->lock)->rlock#2){-.-...}, at: [<bf054120>] mxs_mmc_enable_sdio_irq+0x18/0xdc [mxs_mmc] [ 65.470000] [ 65.470000] other info that might help us debug this: [ 65.470000] Possible unsafe locking scenario: [ 65.470000] [ 65.470000] CPU0 [ 65.470000] ---- [ 65.470000] lock(&(&host->lock)->rlock#2); [ 65.470000] lock(&(&host->lock)->rlock#2); [ 65.470000] [ 65.470000] *** DEADLOCK *** [ 65.470000] [ 65.470000] May be due to missing lock nesting notation [ 65.470000] [ 65.470000] 1 lock held by ksdioirqd/mmc0/73: [ 65.470000] #0: (&(&host->lock)->rlock#2){-.-...}, at: [<bf054120>] mxs_mmc_enable_sdio_irq+0x18/0xdc [mxs_mmc] [ 65.470000] [ 65.470000] stack backtrace: [ 65.470000] [<c0014990>] (unwind_backtrace+0x0/0xf4) from [<c005ccb8>] (__lock_acquire+0x14f8/0x1b98) [ 65.470000] [<c005ccb8>] (__lock_acquire+0x14f8/0x1b98) from [<c005d3f8>] (lock_acquire+0xa0/0x108) [ 65.470000] [<c005d3f8>] (lock_acquire+0xa0/0x108) from [<c02f671c>] (_raw_spin_lock_irqsave+0x48/0x5c) [ 65.470000] [<c02f671c>] (_raw_spin_lock_irqsave+0x48/0x5c) from [<bf054120>] (mxs_mmc_enable_sdio_irq+0x18/0xdc [mxs_mmc]) [ 65.470000] [<bf054120>] (mxs_mmc_enable_sdio_irq+0x18/0xdc [mxs_mmc]) from [<bf0541d0>] (mxs_mmc_enable_sdio_irq+0xc8/0xdc [mxs_mmc]) [ 65.470000] [<bf0541d0>] (mxs_mmc_enable_sdio_irq+0xc8/0xdc [mxs_mmc]) from [<c0219b38>] (sdio_irq_thread+0x1bc/0x274) [ 65.470000] [<c0219b38>] (sdio_irq_thread+0x1bc/0x274) from [<c003c324>] (kthread+0x8c/0x98) [ 65.470000] [<c003c324>] (kthread+0x8c/0x98) from [<c00101ac>] (kernel_thread_exit+0x0/0x8) [ 65.470000] BUG: spinlock lockup suspected on CPU#0, ksdioirqd/mmc0/73 [ 65.470000] lock: 0xc3358724, .magic: dead4ead, .owner: ksdioirqd/mmc0/73, .owner_cpu: 0 [ 65.470000] [<c0014990>] (unwind_backtrace+0x0/0xf4) from [<c01b46b0>] (do_raw_spin_lock+0x100/0x144) [ 65.470000] [<c01b46b0>] (do_raw_spin_lock+0x100/0x144) from [<c02f6724>] (_raw_spin_lock_irqsave+0x50/0x5c) [ 65.470000] [<c02f6724>] (_raw_spin_lock_irqsave+0x50/0x5c) from [<bf054120>] (mxs_mmc_enable_sdio_irq+0x18/0xdc [mxs_mmc]) [ 65.470000] [<bf054120>] (mxs_mmc_enable_sdio_irq+0x18/0xdc [mxs_mmc]) from [<bf0541d0>] (mxs_mmc_enable_sdio_irq+0xc8/0xdc [mxs_mmc]) [ 65.470000] [<bf0541d0>] (mxs_mmc_enable_sdio_irq+0xc8/0xdc [mxs_mmc]) from [<c0219b38>] (sdio_irq_thread+0x1bc/0x274) [ 65.470000] [<c0219b38>] (sdio_irq_thread+0x1bc/0x274) from [<c003c324>] (kthread+0x8c/0x98) [ 65.470000] [<c003c324>] (kthread+0x8c/0x98) from [<c00101ac>] (kernel_thread_exit+0x0/0x8) Reported-by: Attila Kinali <attila@kinali.ch> Signed-off-by: Lauri Hintsala <lauri.hintsala@bluegiga.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-09-04mmc: mxs-mmc: fix deadlock in SDIO IRQ caseLauri Hintsala
Release the lock before mmc_signal_sdio_irq is called by mxs_mmc_irq_handler. Backtrace: [ 79.660000] ============================================= [ 79.660000] [ INFO: possible recursive locking detected ] [ 79.660000] 3.4.0-00009-g3e96082-dirty #11 Not tainted [ 79.660000] --------------------------------------------- [ 79.660000] swapper/0 is trying to acquire lock: [ 79.660000] (&(&host->lock)->rlock#2){-.....}, at: [<c026ea3c>] mxs_mmc_enable_sdio_irq+0x18/0xd4 [ 79.660000] [ 79.660000] but task is already holding lock: [ 79.660000] (&(&host->lock)->rlock#2){-.....}, at: [<c026f744>] mxs_mmc_irq_handler+0x1c/0xe8 [ 79.660000] [ 79.660000] other info that might help us debug this: [ 79.660000] Possible unsafe locking scenario: [ 79.660000] [ 79.660000] CPU0 [ 79.660000] ---- [ 79.660000] lock(&(&host->lock)->rlock#2); [ 79.660000] lock(&(&host->lock)->rlock#2); [ 79.660000] [ 79.660000] *** DEADLOCK *** [ 79.660000] [ 79.660000] May be due to missing lock nesting notation [ 79.660000] [ 79.660000] 1 lock held by swapper/0: [ 79.660000] #0: (&(&host->lock)->rlock#2){-.....}, at: [<c026f744>] mxs_mmc_irq_handler+0x1c/0xe8 [ 79.660000] [ 79.660000] stack backtrace: [ 79.660000] [<c0014bd0>] (unwind_backtrace+0x0/0xf4) from [<c005f9c0>] (__lock_acquire+0x1948/0x1d48) [ 79.660000] [<c005f9c0>] (__lock_acquire+0x1948/0x1d48) from [<c005fea0>] (lock_acquire+0xe0/0xf8) [ 79.660000] [<c005fea0>] (lock_acquire+0xe0/0xf8) from [<c03a8460>] (_raw_spin_lock_irqsave+0x44/0x58) [ 79.660000] [<c03a8460>] (_raw_spin_lock_irqsave+0x44/0x58) from [<c026ea3c>] (mxs_mmc_enable_sdio_irq+0x18/0xd4) [ 79.660000] [<c026ea3c>] (mxs_mmc_enable_sdio_irq+0x18/0xd4) from [<c026f7fc>] (mxs_mmc_irq_handler+0xd4/0xe8) [ 79.660000] [<c026f7fc>] (mxs_mmc_irq_handler+0xd4/0xe8) from [<c006bdd8>] (handle_irq_event_percpu+0x70/0x254) [ 79.660000] [<c006bdd8>] (handle_irq_event_percpu+0x70/0x254) from [<c006bff8>] (handle_irq_event+0x3c/0x5c) [ 79.660000] [<c006bff8>] (handle_irq_event+0x3c/0x5c) from [<c006e6d0>] (handle_level_irq+0x90/0x110) [ 79.660000] [<c006e6d0>] (handle_level_irq+0x90/0x110) from [<c006b930>] (generic_handle_irq+0x38/0x50) [ 79.660000] [<c006b930>] (generic_handle_irq+0x38/0x50) from [<c00102fc>] (handle_IRQ+0x30/0x84) [ 79.660000] [<c00102fc>] (handle_IRQ+0x30/0x84) from [<c000f058>] (__irq_svc+0x38/0x60) [ 79.660000] [<c000f058>] (__irq_svc+0x38/0x60) from [<c0010520>] (default_idle+0x2c/0x40) [ 79.660000] [<c0010520>] (default_idle+0x2c/0x40) from [<c0010a90>] (cpu_idle+0x64/0xcc) [ 79.660000] [<c0010a90>] (cpu_idle+0x64/0xcc) from [<c04ff858>] (start_kernel+0x244/0x2c8) [ 79.660000] BUG: spinlock lockup on CPU#0, swapper/0 [ 79.660000] lock: c398cb2c, .magic: dead4ead, .owner: swapper/0, .owner_cpu: 0 [ 79.660000] [<c0014bd0>] (unwind_backtrace+0x0/0xf4) from [<c01ddb1c>] (do_raw_spin_lock+0xf0/0x144) [ 79.660000] [<c01ddb1c>] (do_raw_spin_lock+0xf0/0x144) from [<c03a8468>] (_raw_spin_lock_irqsave+0x4c/0x58) [ 79.660000] [<c03a8468>] (_raw_spin_lock_irqsave+0x4c/0x58) from [<c026ea3c>] (mxs_mmc_enable_sdio_irq+0x18/0xd4) [ 79.660000] [<c026ea3c>] (mxs_mmc_enable_sdio_irq+0x18/0xd4) from [<c026f7fc>] (mxs_mmc_irq_handler+0xd4/0xe8) [ 79.660000] [<c026f7fc>] (mxs_mmc_irq_handler+0xd4/0xe8) from [<c006bdd8>] (handle_irq_event_percpu+0x70/0x254) [ 79.660000] [<c006bdd8>] (handle_irq_event_percpu+0x70/0x254) from [<c006bff8>] (handle_irq_event+0x3c/0x5c) [ 79.660000] [<c006bff8>] (handle_irq_event+0x3c/0x5c) from [<c006e6d0>] (handle_level_irq+0x90/0x110) [ 79.660000] [<c006e6d0>] (handle_level_irq+0x90/0x110) from [<c006b930>] (generic_handle_irq+0x38/0x50) [ 79.660000] [<c006b930>] (generic_handle_irq+0x38/0x50) from [<c00102fc>] (handle_IRQ+0x30/0x84) [ 79.660000] [<c00102fc>] (handle_IRQ+0x30/0x84) from [<c000f058>] (__irq_svc+0x38/0x60) [ 79.660000] [<c000f058>] (__irq_svc+0x38/0x60) from [<c0010520>] (default_idle+0x2c/0x40) [ 79.660000] [<c0010520>] (default_idle+0x2c/0x40) from [<c0010a90>] (cpu_idle+0x64/0xcc) [ 79.660000] [<c0010a90>] (cpu_idle+0x64/0xcc) from [<c04ff858>] (start_kernel+0x244/0x2c8) Signed-off-by: Lauri Hintsala <lauri.hintsala@bluegiga.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-09-04mmc: bfin_sdh: fix dma_desc_array build errorSonic Zhang
Descriptor array structure has been moved into blackfin dma.h head file. This patch fix below error: drivers/mmc/host/bfin_sdh.c:52:8: error: redefinition of 'struct dma_desc_array' make[4]: *** [drivers/mmc/host/bfin_sdh.o] Error 1 Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-09-04UBI: fix a horrible memory deallocation bugArtem Bityutskiy
UBI was mistakingly using 'kfree()' instead of 'kmem_cache_free()' when freeing "attach eraseblock" structures in vtbl.c. Thankfully, this happened only when we were doing auto-format, so many systems were unaffected. However, there are still many users affected. It is strange, but the system did not crash and nothing bad happened when the SLUB memory allocator was used. However, in case of SLOB we observed an crash right away. This problem was introduced in 2.6.39 by commit "6c1e875 UBI: add slab cache for ubi_scan_leb objects" A note for stable trees: Because variable were renamed, this won't cleanly apply to older kernels. Changing names like this should help: 1. ai -> si 2. aeb_slab_cache -> seb_slab_cache 3. new_aeb -> new_seb Reported-by: Richard Genoud <richard.genoud@gmail.com> Tested-by: Richard Genoud <richard.genoud@gmail.com> Tested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: stable@vger.kernel.org [v2.6.39+] Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-03Merge branches 'clkdev_fixes_3.6rc', 'clkdm_fixes_3.6rc' and ↵Paul Walmsley
'hwmod_data_fixes_a_3.6rc' into omap_fixes_a_3.6rc
2012-09-03ARM: OMAP4: hwmod data: temporarily comment out data for the sl2if IP blockTero Kristo
The OMAP4 sl2if IP block requires some special programming for it to enter idle. Without this programming, it will prevent the rest of the chip from entering full chip idle. This patch comments out the IP block data. Later, once the appropriate support is available, this patch can be reverted. Cc: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-09-03ARM: OMAP: hwmod code: Disable module when hwmod enable failsMisael Lopez Cruz
Clock and module mode are explictly enable when hwmod is enabled. But if the hwmod doesn't get ready on time, clocks are disabled but module is left enabled. Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-09-03ARM: OMAP3: hwmod data: fix iva2 reset infoTero Kristo
IVA2 hwmod resets were missing the status bit offsets. Also, as the hwmod itself didn't have prcm info at all, resetting iva hwmod was accessing some bogus memory addresses. Added both infos to fix this. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-09-03ARM: OMAP3xxx: clockdomain: fix software supervised wakeup/sleepPaul Walmsley
Commit 4da71ae6 ("OMAP: clockdomain: Arch specific funcs for clkdm_clk_enable/disable") called the OMAP2xxx-specific functions for clockdomain wakeup and sleep. This would probably have broken software-supervised clockdomain wakeup and sleep on OMAP3. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Jon Hunter <jon-hunter@ti.com> Acked-by: Rajendra Nayak <rnayak@ti.com>
2012-09-03ARM: OMAP2+: am33xx: Fix the timer fck clock naming conventionVaibhav Hiremath
With commit ae6df418a21f3a361c5f9b878e32a8aba4e17692 Sub: ARM: OMAP2+: dmtimer: cleanup fclk usage) The Timer functional clock naming convention has changed from gptX_fck => timerXfck, and so as the timer init function in mach-omap2/timer.c. OMAP4 clocktree also has changed accordingly. AM33xx Clock Tree has been merged during rc3-4 timeframe, before above commit got merged, so similar change is required for AM33xx as well (Change the gptX_fck => timerX_fck). Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-09-03ARM: shmobile: armadillo800eva: enable rw rootfs mountKuninori Morimoto
armadillo800eva default boot loader is "hermit", and it's tag->u.core.flags has flag when kernel boots. Because of this, ${LINUX}/arch/arm/kernel/setup.c :: parse_tag_core() didn't remove MS_RDONLY flag from root_mountflags. Thus, the rootfs is mounted as "readonly". This patch adds "rw" kernel parameter, and enable read/write mounts for rootfs Cc: Masahiro Nakai <nakai@atmark-techno.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-09-02Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull CIFS fixes from Steve French. * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: CIFS: Fix cifs_do_create error hadnling cifs: print error code if smb signature verification fails CIFS: Fix log messages in packet checking for SMB2 CIFS: Protect i_nlink from being negative
2012-09-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) NLA_PUT* --> nla_put_* conversion got one case wrong in nfnetlink_log, fix from Patrick McHardy. 2) Missed error return check in ipw2100 driver, from Julia Lawall. 3) PMTU updates in ipv4 were setting the expiry time incorrectly, fix from Eric Dumazet. 4) SFC driver erroneously reversed src and dst when reporting filters via ethtool. 5) Memory leak in CAN protocol and wrong setting of IRQF_SHARED in sja1000 can platform driver, from Alexey Khoroshilov and Sven Schmitt. 6) Fix multicast traffic scaling regression in ipv4_dst_destroy, only take the lock when we really need to. From Eric Dumazet. 7) Fix non-root process spoofing in netlink, from Pablo Neira Ayuso. 8) CWND reduction in TCP is done incorrectly during non-SACK recovery, fix from Yuchung Cheng. 9) Revert netpoll change, and fix what was actually a driver specific problem. From Amerigo Wang. This should cure bootup hangs with netconsole some people reported. 10) Fix xen-netfront invoking __skb_fill_page_desc() with a NULL page pointer. From Ian Campbell. 11) SIP NAT fix for expectiontation creation, from Pablo Neira Ayuso. 12) __ip_rt_update_pmtu() needs RCU locking, from Eric Dumazet. 13) Fix usbnet deadlock on resume, can't use GFP_KERNEL in this situation. From Oliver Neukum. 14) The davinci ethernet driver triggers an OOPS on removal because it frees an MDIO object before unregistering it. Fix from Bin Liu. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits) net: qmi_wwan: add several new Gobi devices fddi: 64 bit bug in smt_add_para() net: ethernet: fix kernel OOPS when remove davinci_mdio module net/xfrm/xfrm_state.c: fix error return code net: ipv6: fix error return code net: qmi_wwan: new device: Foxconn/Novatel E396 usbnet: fix deadlock in resume cs89x0 : packet reception not working netfilter: nf_conntrack: fix racy timer handling with reliable events bnx2x: Correct the ndo_poll_controller call bnx2x: Move netif_napi_add to the open call ipv4: must use rcu protection while calling fib_lookup bnx2x: fix 57840_MF pci id net: ipv4: ipmr_expire_timer causes crash when removing net namespace e1000e: DoS while TSO enabled caused by link partner with small MSS l2tp: avoid to use synchronize_rcu in tunnel free function gianfar: fix default tx vlan offload feature flag netfilter: nf_nat_sip: fix incorrect handling of EBUSY for RTCP expectation xen-netfront: use __pskb_pull_tail to ensure linear area is big enough on RX netfilter: nfnetlink_log: fix error return code in init path ...
2012-09-02Merge branch 'fixes' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: marzen: fixup smsc911x id for regulator
2012-09-02Merge branch 'fixes-for-v3.6-v2' of ↵Olof Johansson
git://git.infradead.org/users/jcooper/linux into fixes * 'fixes-for-v3.6-v2' of git://git.infradead.org/users/jcooper/linux: ARM: Kirkwood: Fix 'SZ_1M' undeclared here for db88f6281-bp-setup.c
2012-09-02HID: Only dump input if someone is listeningHenrik Rydberg
Going through the motions of printing the debug message information takes a long time; using the keyboard can lead to a 160 us irqsoff latency. This patch skips hid_dump_input() when there are no open handles, which brings latency down to 100 us. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-01net: qmi_wwan: add several new Gobi devicesBjørn Mork
Gobi devices are composite, needing both the qcserial and qmi_wwan drivers to support all functions. Re-syncing the list of supported devices with qcserial. Cc: Aleksander Morgado <aleksander@lanedo.com> Cc: Thomas Tuttle <ttuttle@chromium.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@tempietto.lan>
2012-09-01fddi: 64 bit bug in smt_add_para()Dan Carpenter
The intent was to set 4 bytes of data so that's why the sp_len is set to 4 on the next line. The cast to u_long pointer clears 8 bytes on 64 bit arches. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@tempietto.lan>
2012-09-01linux/kernel.h: Fix DIV_ROUND_CLOSEST to support negative dividendsGuenter Roeck
DIV_ROUND_CLOSEST returns a bad result for negative dividends: DIV_ROUND_CLOSEST(-2, 2) = 0 Most of the time this does not matter. However, in the hardware monitoring subsystem, DIV_ROUND_CLOSEST is sometimes used on integers which can be negative (such as temperatures). Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jean Delvare <khali@linux-fr.org>
2012-09-01Linux 3.6-rc4v3.6-rc4Linus Torvalds
2012-09-01time: Move ktime_t overflow checking into timespec_valid_strictJohn Stultz
Andreas Bombe reported that the added ktime_t overflow checking added to timespec_valid in commit 4e8b14526ca7 ("time: Improve sanity checking of timekeeping inputs") was causing problems with X.org because it caused timeouts larger then KTIME_T to be invalid. Previously, these large timeouts would be clamped to KTIME_MAX and would never expire, which is valid. This patch splits the ktime_t overflow checking into a new timespec_valid_strict function, and converts the timekeeping codes internal checking to use this more strict function. Reported-and-tested-by: Andreas Bombe <aeb@debian.org> Cc: Zhouping Liu <zliu@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-09-01gpio: rdc321x: Prevent removal of modules exporting active GPIOsAxel Lin
This driver can be built as a module, set the missing owner field of struct gpio_chip to prevent removal of modules exporting active GPIOs. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-08-31Merge git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM bugfixes from Marcelo Tosatti. * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: fix KVM_GET_MSR for PV EOI kvm: Fix nonsense handling of compat ioctl
2012-08-31Merge tag 'parisc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6 Pull PARISC fixes from James Bottomley: "This is a set of two bug fixes. One is the ATOMIC problem which is now causing a compile failure in certain situations. The other is mishandling of PER_LINUX32 which may also cause user visible effects. Signed-off-by: James Bottomley <JBottomley@Parallels.com>" * tag 'parisc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6: [PARISC] fix personality flag check in copy_thread() [PARISC] Redefine ATOMIC_INIT and ATOMIC64_INIT to drop the casts
2012-08-31Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "A couple of s390 bug fixes for 3.5-rc4" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/32: Don't clobber personality flags on exec s390/smp: add missing smp_store_status() for !SMP s390/dasd: fix ioctl return value s390: Always use "long" for ssize_t to match size_t
2012-09-01gpio: em: Fix checking return value of irq_alloc_descsAxel Lin
irq_alloc_descs() returns negative error code on failure. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-01gpio: mc9s08dz60: Fix build error if I2C=mAxel Lin
Make GPIO_MC9S08DZ60 depend on I2C=y, this fixes below build error: LD init/built-in.o drivers/built-in.o: In function `mc9s08dz60_get_value': clk-fixed-factor.c:(.text+0x7214): undefined reference to `i2c_smbus_read_byte_data' drivers/built-in.o: In function `mc9s08dz60_set': clk-fixed-factor.c:(.text+0x727c): undefined reference to `i2c_smbus_read_byte_data' clk-fixed-factor.c:(.text+0x72bc): undefined reference to `i2c_smbus_write_byte_data' drivers/built-in.o: In function `mc9s08dz60_i2c_driver_init': clk-fixed-factor.c:(.init.text+0x290): undefined reference to `i2c_register_driver' drivers/built-in.o: In function `mc9s08dz60_i2c_driver_exit': clk-fixed-factor.c:(.exit.text+0x2c): undefined reference to `i2c_del_driver' make: *** [vmlinux] Error 1 Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-08-31net: ethernet: fix kernel OOPS when remove davinci_mdio moduleBin Liu
davinci mdio device is not unregistered from mdiobus when removing the module, which causes BUG_ON() when free the device from mdiobus. Calling mdiobus_unregister() before mdiobus_free() fixes the issue. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-31net/xfrm/xfrm_state.c: fix error return codeJulia Lawall
Initialize return variable before exiting on an error path. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-31net: ipv6: fix error return codeJulia Lawall
Initialize return variable before exiting on an error path. The initial initialization of the return variable is also dropped, because that value is never used. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-31net: qmi_wwan: new device: Foxconn/Novatel E396Aleksander Morgado
Foxconn-branded Novatel E396, Gobi3k modem. Cc: Dan Williams <dcbw@redhat.com> Cc: Bjørn Mork <bjorn@mork.no> Cc: Ben Chan <benchan@google.com> Signed-off-by: Aleksander Morgado <aleksander@lanedo.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-31usbnet: fix deadlock in resumeOliver Neukum
A usbnet device can share a multifunction device with a storage device. If the storage device is autoresumed the usbnet devices also needs to be autoresumed. Allocating memory with GFP_KERNEL can deadlock in this case. This should go back into all kernels that have commit 65841fd5132c3941cdf5df09e70df3ed28323212 That is 3.5 Signed-off-by: Oliver Neukum <oneukum@suse.de> CC: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-31cs89x0 : packet reception not workingJaccon Bastiaansen
The RxCFG register of the CS89x0 could be configured incorrectly (because of misplaced parentheses), resulting in the disabling of packet reception. Signed-off-by: Jaccon Bastiaansen <jaccon.bastiaansen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-31ALSA: snd-usb: fix cross-interface streaming devicesDaniel Mack
Commit 68e67f40b ("ALSA: snd-usb: move calls to usb_set_interface") saved us some unnecessary calls to snd_usb_set_interface() but ignored the fact that there is at least one device out there which operates on two endpoint in different interfaces simultaniously. Take care for this by catching the case where data and sync endpoints are located on different interfaces and calling snd_usb_set_interface() between the start of the two endpoints. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-by: Robert M. Albrecht <linux@romal.de> Cc: stable@kernel.org [v3.5+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-31ALSA: snd-usb: fix calls to next_packet_sizeDaniel Mack
In order to support devices with implicit feedback streaming models, packet sizes are now stored with each individual urb, and the PCM handling code which fills the buffers purely relies on the size fields now. However, calling snd_usb_audio_next_packet_size() for all possible packets in an URB at once, prior to letting the PCM code do its job does in fact not lead to the same behaviour than what the old code did: The PCM code will break its loop once a period boundary is reached, consequently using up less packets that it really could. As snd_usb_audio_next_packet_size() implements a feedback mechanism to the endpoints phase accumulator, the number of calls to that function matters, and when called too often, the data rate runs out of bounds. Fix this by making the next_packet function public, and call it from the PCM code as before if the packet data sizes are not defined. Signed-off-by: Daniel Mack <zonque@gmail.com> Cc: stable@kernel.org [v3.5+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-31ALSA: snd-usb: restore delay informationDaniel Mack
Parts of commit 294c4fb8 ("ALSA: usb: refine delay information with USB frame counter") were unfortunately lost during the refactoring of the snd-usb driver in 3.5. This patch adds them back, restoring the correct delay information behaviour. Signed-off-by: Daniel Mack <zonque@gmail.com> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Cc: stable@kernel.org [3.5+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-31Merge branch 'master' of git://1984.lsi.us.es/nfDavid S. Miller
2012-08-31ALSA: snd-usb: use list_for_each_safe for endpoint resourcesPavel Roskin
snd_usb_endpoint_free() frees the structure that contains its argument. Signed-off-by: Pavel Roskin <proski@gnu.org> Cc: stable@vger.kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-31ARM: Kirkwood: Fix 'SZ_1M' undeclared here for db88f6281-bp-setup.cAndrew Lunn
Linux-next has failed to compile for kirkwood since 23 August with: arch/arm/mach-kirkwood/db88f6281-bp-setup.c:29: error: 'SZ_1M' undeclared here (not in a function) arch/arm/mach-kirkwood/db88f6281-bp-setup.c:33: error: 'SZ_4M' undeclared here (not in a function) Add missing <linux/sizes.h> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-08-31netfilter: nf_conntrack: fix racy timer handling with reliable eventsPablo Neira Ayuso
Existing code assumes that del_timer returns true for alive conntrack entries. However, this is not true if reliable events are enabled. In that case, del_timer may return true for entries that were just inserted in the dying list. Note that packets / ctnetlink may hold references to conntrack entries that were just inserted to such list. This patch fixes the issue by adding an independent timer for event delivery. This increases the size of the ecache extension. Still we can revisit this later and use variable size extensions to allocate this area on demand. Tested-by: Oliver Smith <olipro@8.c.9.b.0.7.4.0.1.0.0.2.ip6.arpa> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-08-31ARM: shmobile: mackerel: fixup usb module orderKuninori Morimoto
renesas_usbhs driver can play role as both Host and Gadget. In case of Gadget, it requires not only renesas_usbhs but also usb gadget module (like g_ether). So, renesas_usbhs driver calls usb_add_gadget_udc() on probe time. Because of this behavior, Host port plays also Gadget role if kernel has both Host/Gadget support. In mackerel case, from 0ada2da51800a4914887a9bcf22d563be80e50be (ARM: mach-shmobile: mackerel: use renesas_usbhs instead of r8a66597_hcd) usb0 plays Gadget role, and usb1 plays Host role, and current mackerel board probes as usb1 -> usb0. Thus, 1st installed usb gadget module (like g_ether) will be assigned to usb1 (= usb Host port), and 2nd module to usb0 (= usb Gadget port). It is very confusable for user. This patch fixup usb modes probing order as usb0 -> usb1. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-08-31ARM: shmobile: armadillo800eva: fixup: sound card detection orderKuninori Morimoto
Since armadillo800eva has 2 sound cards, and had reversed deferred probe order issue, it was purposely registered in reverse order. But it was solved by 1d29cfa57471a5e4b8a7c2a7433eeba170d3ad92 (driver core: fixup reversed deferred probe order) armadillo800eva board is expecting that FSI-WM8978 is the 1st, and FSI-HDMI is the 2nd sound card. This patch fixes it up Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-08-30ARM: OMAP: Config fix for omap3-touchbook boardRadek Pilar
Fix inconsistency between mach-types and CONFIG_ name that prevents touchbook board from booting. Signed-off-by: Radek Pilar <mrkva@mrkva.eu> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-08-30ARM: OMAP: sram: skip the first 16K on OMAP3 HSAaro Koskinen
In some OMAP3 HS devices (at least Nokia N9 and N950), the public SRAM seems to conflict with secure portition of SRAM. When booting the 3.6-rc3 kernel (and also earlier) on these devices, the kernel gets tainted with tons of the following warnings: [ 6.894348] In-band Error seen by MPU at address 0 [...] [ 6.894378] WARNING: at arch/arm/mach-omap2/omap_l3_smx.c:162 Fix this by skipping the first 16K of the public SRAM. (Note that the mapping could not be changed, as it resulted in secure monitor call failure in save_secure_sram().) This will leave 12K SRAM available that should be still sufficient. The patch has been boot tested with vanilla 3.6-rc3 on N900, N950 and N9. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-08-30ARM: OMAP: sram: fix OMAP4 errata handlingAaro Koskinen
OMAP4-specific code should be executed only if we are running on OMAP4. Otherwise it may break multi-OMAP kernels. Found by reading the code. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-08-30ARM: OMAP: timer: obey the !CONFIG_OMAP_32K_TIMERIgor Grinberg
Currently, omap2_sync32k_clocksource_init() function initializes the 32K timer as the system clock source regardless of the CONFIG_OMAP_32K_TIMER setting. Fix this by providing a default implementation for !CONFIG_OMAP_32K_TIMER case. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Reviewed-by: Paul Walmsley <paul@pwsan.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-08-30bnx2x: Correct the ndo_poll_controller callMerav Sicron
This patch correct poll_bnx2x (ndo_poll_controller call) which was not functioning well with MSI-X. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-30bnx2x: Move netif_napi_add to the open callMerav Sicron
Move netif_napi_add for all queues from the probe call to the open call, to avoid the case that napi objects are added for queues that may eventually not be initialized and activated. With the former behavior, the driver could crash when netpoll was calling ndo_poll_controller. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-30ipv4: must use rcu protection while calling fib_lookupEric Dumazet
Following lockdep splat was reported by Pavel Roskin : [ 1570.586223] =============================== [ 1570.586225] [ INFO: suspicious RCU usage. ] [ 1570.586228] 3.6.0-rc3-wl-main #98 Not tainted [ 1570.586229] ------------------------------- [ 1570.586231] /home/proski/src/linux/net/ipv4/route.c:645 suspicious rcu_dereference_check() usage! [ 1570.586233] [ 1570.586233] other info that might help us debug this: [ 1570.586233] [ 1570.586236] [ 1570.586236] rcu_scheduler_active = 1, debug_locks = 0 [ 1570.586238] 2 locks held by Chrome_IOThread/4467: [ 1570.586240] #0: (slock-AF_INET){+.-...}, at: [<ffffffff814f2c0c>] release_sock+0x2c/0xa0 [ 1570.586253] #1: (fnhe_lock){+.-...}, at: [<ffffffff815302fc>] update_or_create_fnhe+0x2c/0x270 [ 1570.586260] [ 1570.586260] stack backtrace: [ 1570.586263] Pid: 4467, comm: Chrome_IOThread Not tainted 3.6.0-rc3-wl-main #98 [ 1570.586265] Call Trace: [ 1570.586271] [<ffffffff810976ed>] lockdep_rcu_suspicious+0xfd/0x130 [ 1570.586275] [<ffffffff8153042c>] update_or_create_fnhe+0x15c/0x270 [ 1570.586278] [<ffffffff815305b3>] __ip_rt_update_pmtu+0x73/0xb0 [ 1570.586282] [<ffffffff81530619>] ip_rt_update_pmtu+0x29/0x90 [ 1570.586285] [<ffffffff815411dc>] inet_csk_update_pmtu+0x2c/0x80 [ 1570.586290] [<ffffffff81558d1e>] tcp_v4_mtu_reduced+0x2e/0xc0 [ 1570.586293] [<ffffffff81553bc4>] tcp_release_cb+0xa4/0xb0 [ 1570.586296] [<ffffffff814f2c35>] release_sock+0x55/0xa0 [ 1570.586300] [<ffffffff815442ef>] tcp_sendmsg+0x4af/0xf50 [ 1570.586305] [<ffffffff8156fc60>] inet_sendmsg+0x120/0x230 [ 1570.586308] [<ffffffff8156fb40>] ? inet_sk_rebuild_header+0x40/0x40 [ 1570.586312] [<ffffffff814f4bdd>] ? sock_update_classid+0xbd/0x3b0 [ 1570.586315] [<ffffffff814f4c50>] ? sock_update_classid+0x130/0x3b0 [ 1570.586320] [<ffffffff814ec435>] do_sock_write+0xc5/0xe0 [ 1570.586323] [<ffffffff814ec4a3>] sock_aio_write+0x53/0x80 [ 1570.586328] [<ffffffff8114bc83>] do_sync_write+0xa3/0xe0 [ 1570.586332] [<ffffffff8114c5a5>] vfs_write+0x165/0x180 [ 1570.586335] [<ffffffff8114c805>] sys_write+0x45/0x90 [ 1570.586340] [<ffffffff815d2722>] system_call_fastpath+0x16/0x1b Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Pavel Roskin <proski@gnu.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-07-16 01:20:52 +0000