summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-12-01ath9k: set ATH_OP_INVALID before disabling hardwareFelix Fietkau
Closes another small IRQ handler race Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-01ath9k: prevent early IRQs from accessing hardwareFelix Fietkau
IRQs are suppressed if ah == NULL and ATH_OP_INVALID being set in common->op_flags. Close a short time window between those two. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-01ath5k: fix hardware queue index assignmentFelix Fietkau
Like with ath9k, ath5k queues also need to be ordered by priority. queue_info->tqi_subtype already contains the correct index, so use it instead of relying on the order of ath5k_hw_setup_tx_queue calls. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-01ath9k: fix BE/BK queue orderFelix Fietkau
Hardware queues are ordered by priority. Use queue index 0 for BK, which has lower priority than BE. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-01ath9k_hw: fix hardware queue allocationFelix Fietkau
The driver passes the desired hardware queue index for a WMM data queue in qinfo->tqi_subtype. This was ignored in ath9k_hw_setuptxqueue, which instead relied on the order in which the function is called. Cc: stable@vger.kernel.org Reported-by: Hubert Feurstein <h.feurstein@gmail.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-01brcmsmac: NULL dereferences in brcms_c_detach_mfree()Dan Carpenter
The brcms_c_attach_malloc() function can call this with a NULL "wlc->corestate" or "wlc->hw". Also I threw in a bonus cleanup by deleting an obvious comment and a no-op NULL assignment. :) Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-01Revert "rt2x00: Endless loop on hub port power down"Stanislaw Gruszka
This reverts commit 2ad69ac5976191e9bb7dc4044204a504653ad1bb. It causes wireless device disappear when we get -EPROTO error form USB request. I encounter such situation occasionally when resume form suspend with RT3070 adapter: [ 289.619985] ieee80211 phy0: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0404 with error -71 [ 289.639368] ieee80211 phy0: rt2800_wait_bbp_ready: Error - BBP register access failed, aborting [ 289.639374] ieee80211 phy0: rt2800usb_set_device_state: Error - Device failed to enter state 4 (-5) Without the patch, except printing error, device works just fine after resume. Currently after timeouts and REGISTER_BUSY_COUNT tuning, we should not have any "endless loop", though we can wait quite long when driver is trying to communicate with the device through non functioning USB connection. Generally the problem that commit 2ad69ac597619 solves is kinda artificial. Cc: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-01rt2x00: change REGISTER_TIMEOUTStanislaw Gruszka
Waiting 500ms for register access is too long, decrease this value to 100ms. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-01rt2x00: change REGISTER_BUSY_COUNT for USBStanislaw Gruszka
Because of delays on USB we do not have to iterate so many times on USB hardware when waiting for H/W register become valid. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-01rt2x00: use timeout in rt2x00usb_vendor_requestStanislaw Gruszka
Use provided timeout value in rt2x00usb_vendor_request() instead of iterating REGISTER_BUSY_COUNT times. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-01brcmsmac: extend hardware info shown in debugfsArend van Spriel
The hardware info now also include radio and phy information, which can be helpful in debugging issues. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-01brcmutil: add helper function to format board revisionArend van Spriel
The board revision that is available in hardware can be translated so it matches the labelling on the board. This is accomplished by this helper function. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-01rt2800: calculate tx power temperature compensation on selected chipsStanislaw Gruszka
Currently implemented temperature compensation is only valid on some of supported chips. Other chips do not need temperature compensation or need different way to do this (not yet implemented in the rt2800 driver). Trying to do run rt2800_get_gain_calibration_delta() when this is not appropriate on particular chip gives bogus result of TX power and can make connection unstable. This is follow up to commit 8c8d2017ba25c510ddf093419048460db1109bc4 "rt2800: fix RT5390 & RT3290 TX power settings regression". On that commit we avoid setting BBP_R1 register, but the real problem is wrong temperature compensation calculation. Reported-and-tested-by: Ronald Wahl <ronald.wahl@raritan.com> Debugged-by: Ronald Wahl <ronald.wahl@raritan.com> Cc: Mike Romberg <mike-romberg@comcast.net> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-01wil6210: Fix potential memory leaks on error pathsLino Sanfilippo
Fix missing memory deallocation on error paths in wil_write_file_wmi() and wil_write_file_txmgmt(). Reported-by: Ahmed Tamrawi <ahmedtamrawi@gmail.com> Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-01Merge branch 'for-linville' of git://github.com/kvalo/athJohn W. Linville
2014-12-01Merge branch 'for-upstream' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
2014-12-01iwlwifi: pcie: add fh registers to dump dataLiad Kaufman
Adds all FH registers between FH_MEM_UPPER_BOUND and FH_MEM_LOWER_BOUND (which should be readable to the driver) to the dump data when it is collected. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-01iwlwifi: mvm: support ucode load for family_8000 B0 onlyEran Harary
The ucode load flow changed for B0 hardware step. Change the code accordingly. Signed-off-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-01iwlwifi: mvm: remove a dangling line of documentationDavid Spinadel
Signed-off-by: David Spinadel <david.spinadel@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-01iwlwifi: pcie: claim ownership on the device after stop_device()Emmanuel Grumbach
Not doing so would allow other possible users of the device to take ownership and prevent normal WiFi operation. This fixes the second part of: https://bugzilla.kernel.org/show_bug.cgi?id=87191 Reviewed-by: Moshe Harel <moshe.harel@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-01iwlwifi: don't load on 7265D with old NVMEmmanuel Grumbach
7265D are new devices that should always have a new NVM (at least 0x0c11). The firmware has issues with older versions of the NVM which are not and will not be available to the common mortals. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-01iwlwifi: mvm: support NVM file with headerIdan Kahlon
Handle NVM file header. When NVM header detected, skip the header and reading only the sections data. Signed-off-by: Idan Kahlon <idanx.kahlon@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-01iwlwifi: mvm: add channel information to the netdetect notificationsLuciano Coelho
Add the channels on which there was a match for every match reported by the firmware. The firmware reports the channels as indices to the array of channels that was passed in the scheduled scan request, so we need to save the array when entering D3 to make sure it is available when we resume. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-01iwlwifi: mvm: add SSID match information for net-detectLuciano Coelho
Add SSID information to the net-detect indication to userspace. Fetch the matched profiles from the firmware in order to find the correct SSIDs in the profiles that matched. Since the net-detect information is stored in cfg80211, and in theory it could change while we are waking up and reading the matched profiles, we need to save it when we enter D3 so it is available during resume. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-01iwlwifi: pcie: refactor cmd_in_flight set/clear codeEliad Peller
A following patche will use trans_pcie->cmd_in_flight for reference accounting as well. get ready for it. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-01iwlwifi: mvm: add missing mvm ref debug printEliad Peller
IWL_MVM_REF_PROTECT_CSA is missing from the ref strings used by debugfs. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-01iwlwifi: mvm: BT Coex - change the MPLUT registers' valueEmmanuel Grumbach
This impacts the partition between BT and Wifi. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-01iwlwifi: mvm: remove IWL_UCODE_TLV_API_CSA_FLOWEmmanuel Grumbach
All the supported firmwares have this TLV flag set. Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-01iwlwifi: mvm: remove IWL_UCODE_TLV_API_WOWLAN_CONFIG_TIDEmmanuel Grumbach
All the supported firmwares have this TLV flag set. Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-01iwlwifi: mvm: remove IWL_UCODE_TLV_CAPA_EXTENDED_BEACONEmmanuel Grumbach
This TLV flag is set for all the supported firmwares. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-01iwlwifi: deprecate -8.ucode for 3160 / 7260 / 7265Emmanuel Grumbach
This firmware is not supported anymore. Stop loading this firmware - and remove the code that handled older versions. Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-01iwlwifi: mvm: check and report if wake up was due to net detectLuciano Coelho
Query the firmware for scan offload matches when waking up in order to report net detect as the reason for the wake up. This requires a new command API to be implemented. Additionally, remove some net detect command entries that are not valid anymore. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-01iwlwifi: move firmware file format definitions to correct headerJohannes Berg
The firmware file-format is described in iwl-fw-file.h, while the internal handling structures and functions are in iwl-fw.h. Fix the separation between the files by moving file format definitions to iwl-fw-file.h. Also add a missing description for a kernel-doc member, and it's not needed to include iwl-fw-file.h again from the code (thanks to Liad Kaufman). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-01ath10k: simplify rx ring size/fill calculationMichal Kazior
Don't bother with fancy arithmetic and just hardcode the final values. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-12-01ath10k: prevent pci tx/rx starvationMichal Kazior
In theory it was possible to starve the system if a tx/rx handler could implicitly trigger more tx/rx pci events. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-12-01ath10k: remove transfer_id from ath10k_hif_cb::tx_completionMichal Kazior
Pass the eid argument via skbuff control buffer. This will make it possible to work with queues of HTC event buffers. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-12-01ath10k: remove unused callback argument from struct ath10k_hif_cb::rx_completionMichal Kazior
This wasn't used since forever and there are no plans on using it. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-12-01ath10k: make wmi service bitmap non-debugMichal Kazior
The service bitmap can be used to determine firmware capabilities. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-12-01ath10k: add sanity checks for service bmap parsingMichal Kazior
This shouldn't really happen but take into account the original service bitmap length when mapping service ids. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-12-01ath10k: fix wmi svc bitmap dbg printMichal Kazior
The dump print uses sizeof() but since service_map was a mere pointer the dump was too short. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-12-01ath10k: add pointer constness to tracesMichal Kazior
Traces shouldn't modified passed data. This will make it possible to pass const arguments to traces. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-12-01ath10k: do not limit RTS threshold value to 2347Vivek Natarajan
Increase the rts threshold from the legacy value of 2347 to support higher threshold limit. Signed-off-by: Vivek Natarajan <nataraja@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-11-28mac80211: add ieee80211_tx_status_noskbFelix Fietkau
This can be used by drivers that cannot reliably map tx status information onto specific skbs. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-28mac0211: add a helper function for fixing up tx status ratesFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-28mac80211: pass tx info to ieee80211_lost_packet instead of an skbFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-28mac80211: minstrel_ht: switch to .tx_status_noskbFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-28mac80211: minstrel: switch to .tx_status_noskbFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-28mac80211: add tx_status_noskb to rate_control_opsFelix Fietkau
This op works like .tx_status, except it does not need access to the skb. This will be used by drivers that cannot match tx status information to specific packets. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-28mac80211: minstrel_ht: move aggregation check to .get_rate()Felix Fietkau
Preparation for adding a no-skb tx status path Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-28cfg80211: remove unneeded initialisations in nl80211_set_regJohannes Berg
Some variables are assigned unconditionally, remove their initialisations to help avoid introducing errors later. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit (git 2.34.1) at 2025-07-16 03:58:49 +0000