summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-09-03USB: cdc-acm: Add pseudo modem without AT command capabilitiesPhilippe Corbes
cdc-acm.c : Manage pseudo-modem without AT commands capabilities Enable to drive electronic simple gadgets based on microcontrolers. The Interface descriptor is like this: bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 0 None Signed-off-by: Philippe Corbes <philippe.corbes@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-03USB: cxacru: Use a bulk/int URB to access the command endpointSimon Arlott
The command endpoint is either a bulk or interrupt endpoint, but using the wrong type of transfer causes an error if CONFIG_USB_DEBUG is enabled after commit f661c6f8c67bd55e93348f160d590ff9edf08904, which checks for this mismatch. Detect which type of endpoint it is and use a bulk/int URB as appropriate. There are other function calls specifying a bulk pipe, but usb_clear_halt doesn't use the pipe type (only the endpoint) and usb_bulk_msg auto-detects interrupt transfers. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: stable <stable@kernel.org> [.34 and newer] Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-03usb: serial: mos7840: Add USB IDs to support more B&B USB/RS485 converters.Dave Ludlow
Add the USB IDs needed to support the B&B USOPTL4-4P, USO9ML2-2P, and USO9ML2-4P. This patch expands and corrects a typo in the patch sent on 08-31-2010. Signed-off-by: Dave Ludlow <dave.ludlow@bay.ws> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-03USB: cdc-acm: Adding second ACM channel support for various Nokia and one ↵Toby Gray
Samsung phones S60 phones from Nokia and Samsung expose two ACM channels. The first is a modem with a standard AT-command interface, which is picked up correctly by CDC-ACM. The second ACM port is marked as having a vendor-specific protocol. This means that the ACM driver will not claim the second channel by default. This adds support for the second ACM channel for the following devices: Nokia E63 Nokia E75 Nokia 6760 Slide Nokia E52 Nokia E55 Nokia E72 Nokia X6 Nokia N97 Mini Nokia 5800 Xpressmusic Nokia E90 Samsung GTi8510 (INNOV8) Signed-off-by: Toby Gray <toby.gray@realvnc.com> Cc: Oliver Neukum <oliver@neukum.name> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-03usb: serial: mos7840: Add USB ID to support the B&B Electronics USOPTL4-2P.Dave Ludlow
Add the USB ID needed to support B&B Electronic's 2-port, optically-isolated, powered, USB to RS485 converter. Signed-off-by: Dave Ludlow <dave.ludlow@bay.ws> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-03USB: ssu100: turn off debug flagBill Pemberton
Remove the hard coding of the debug flag to 1. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-03usb: allow drivers to use allocated bandwidth until unboundThadeu Lima de Souza Cascardo
When using the remove sysfs file, the device configuration is set to -1 (unconfigured). This eventually unbind drivers with the bandwidth_mutex held. Some drivers may call functions that hold said mutex, like usb_reset_device. This is the case for rtl8187, for example. This will lead to the same process holding the mutex twice, which deadlocks. Besides, according to Alan Stern: "The deadlock problem probably could be handled somehow, but there's a separate issue: Until the usb_disable_device call finishes unbinding the drivers, the drivers are free to continue using their allocated bandwidth. We musn't change the bandwidth allocations until after the unbinding is done. So this patch is indeed necessary." Unbinding the driver before holding the bandwidth_mutex solves the problem. If any operation after that fails, drivers are not bound again. But that would be a problem anyway that the user may solve resetting the device configuration to one that works, just like he would need to do in most other failure cases. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-03USB: cp210x usb driver: add USB_DEVICE for Pirelli DP-L10 mobile.A E Lawrence
The Pirelli DP-L10 mobile is sold under various brand names. One, already supported by cp210x, is the T-COM TC300. Here is the lsusb for that version: ------------------------------------------------------------------- Bus 001 Device 002: ID 0489:e000 Foxconn / Hon Hai T-Com TC 300 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0489 Foxconn / Hon Hai idProduct 0xe000 T-Com TC 300 bcdDevice 1.00 iManufacturer 1 Silicon Labs iProduct 2 TC 300 iSerial 3 0001 [snip] --------------------------------------------------------------------------- However the native Pirelli DP-L10 is not supported: ------------------------------------------------------------------ Bus 001 Device 003: ID 0489:e003 Foxconn / Hon Hai Pirelli DP-L10 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0489 Foxconn / Hon Hai idProduct 0xe003 Pirelli DP-L10 bcdDevice 1.00 iManufacturer 1 Silicon Labs iProduct 2 DP-L10 iSerial 3 0001 [snip] ------------------------------------------------------------------------- All that is required is an extra USB_DEVICE entry: { USB_DEVICE(0x0489, 0xE003) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM +Mobile */ The patch adds that entry. Tested under 2.6.36-rc2 from git. Signed-off-by: A E Lawrence <lawrence_a_e@ntlworld.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-03USB: cp210x: Add B&G H3000 link cable IDJason Detring
This is the cable between an H3000 navigation unit and a multi-function display. http://www.bandg.com/en/Products/H3000/Spares-and-Accessories/Cables/H3000-CPU-USB-Cable-Pack/ Signed-off-by: Jason Detring <jason.detring@navico.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-03USB: CP210x Add new device IDCraig Shelley
New device ID added for Balluff RFID reader. Signed-off-by: Craig Shelley <craig@microtron.org.uk> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-03USB: option: fix incorrect novatel entriesDirk De Schepper
Unfortunately some of the hardware PID belonging to auto-install CDROM (AICD) of Novatel modems found their way into the option module. This causes the AICD to be treated as a modem in stead of a disk. Since the modem ports do not appear until after the AICD is ejected, this essentially disables the modem. After a couple of minutes the AICD should auto-eject, but it is just too long a wait. The frequency of the failure seems to depend on both the hardware and the linux distribution. Here is a patch that fixes this up, and also adds a couple of new PID, offering some explanations and removing some incomplete and unnecessary comments. Signed-off-by: Dirk De Schepper <ddeschepper@nvtl.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-03USB: Fix kernel oops with g_ether and WindowsMaxim Osipov
Please find attached patch for https://bugzilla.kernel.org/show_bug.cgi?id=16023 problem. Signed-off-by: Maxim Osipov <maxim.osipov@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-03USB: rndis: section mismatch fixHenrik Kretzschmar
This patch removes the following section mismatch warning, by moving the function rndis_init() from .init.text to .text. WARNING: vmlinux.o(.text+0x1aeca5a): Section mismatch in reference from the function rndis_bind_config() to the function .init.text:rndis_init() The function rndis_bind_config() references the function __init rndis_init(). This is often because rndis_bind_config lacks a __init annotation or the annotation of rndis_init is wrong. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-03USB: ehci-ppc-of: problems in unwindDan Carpenter
The iounmap(ehci->ohci_hcctrl_reg); should be the first thing we do because the ioremap() was the last thing we did. Also if we hit any of the goto statements in the original code then it would have led to a NULL dereference of "ehci". This bug was introduced in: 796bcae7361c "USB: powerpc: Workaround for the PPC440EPX USBH_23 errata [take 3]" I modified the few lines in front a little so that my code didn't obscure the return success code path. Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Grant Likely <grant.likely@secretlab.ca> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-03USB: s3c-hsotg: Remove DEBUG defineMaurus Cuelenaere
DEBUG is defined unconditionally, remove it as this clutters the message log. Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-03tty: fix tty_line must not be equal to number of allocated tty pointers in ↵Nathael Pajani
tty driver I found a bug "by chance" in drivers/char/tty_io.c I mean "by chance" because I was just reading the code of the tty_find_polling_driver() to make a new tty_find_by_name() function. In tty_find_polling_driver() the driver actually test "tty_line <= p->num" while num refers to the number of struct tty_struct pointers allocated for the p->ttys (p is a tty_driver), and tty_line is scanned in a tty name, which can be for example ttyS2. Then tty_line equals 2. And if p->num is 2, we have only p->ttys[0] and p->ttys[1], but no p->ttys[2]. This is actually unharmful, for tty_find_polling_driver() is used only in drivers/serial/kgdboc.c, and there's a test over there to find a console with a matching index, which will never happen. This is still a bug anyway. Signed-off-by: Nathael Pajani <nathael.pajani@ed3l.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-03serial: bfin_sport_uart: restore transmit frame sync fixSonic Zhang
The large cleanup/rewrite of resources in commit ccf68e59e93181df9353c0cc accidentally reverted an earlier fix in commit a19e8b205915b2925aca75b. So restore it here. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: stable <stable@kernel.org> [.34 and newer] Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-03serial: fix port type conflict between NS16550A & U6_16550APhilippe Langlais
Bug seen by Dr. David Alan Gilbert with sparse Signed-off-by: Philippe Langlais <philippe.langlais@stericsson.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-03MAINTAINERS: orphan isicomJiri Slaby
I do not maintain isicom anymore... Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-03vt: Fix console corruption on driver hand-over.Francisco Jerez
After 02f0777a0d6560eb995aade34a1b82f95c0452da "vc_origin" is no longer reset to the screen buffer before calling the con_init() hook of the new console driver. If the old driver wasn't using a fixed scanout buffer (e.g. the case of vgacon) "vc_origin" may be a pointer to a VRAM location, and its contents aren't guaranteed to be preserved after calling con_deinit() on the old driver and con_init() on the new driver, i.e. the subsequent console resize may fill the framebuffer with garbage. It can be reproduced in the transition from vgacon to the nouveau framebuffer driver: in that case the legacy VGA aperture "vc_origin" points to becomes unreadable after fbcon_init(). This patch reverts the mentioned commit. To avoid the problem it intended to fix, stop using "vc_scr_end" in vc_do_resize() to calculate how many rows we have to copy (actually the code looks simpler this way without the help of "vc_scr_end"). Signed-off-by: Francisco Jerez <currojerez@riseup.net> Cc: qiaochong <qiaochong@loongson.cn> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-03sysfs: checking for NULL instead of ERR_PTRDan Carpenter
d_path() returns an ERR_PTR and it doesn't return NULL. Signed-off-by: Dan Carpenter <error27@gmail.com> Cc: stable <stable@kernel.org> Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-03ALSA: usb-audio: fix detection of vendor-specific device protocol settingsClemens Ladisch
The Audio Class v2 support code in 2.6.35 added checks for the bInterfaceProtocol field. However, there are devices (usually those detected by vendor-specific quirks) that do not have one of the predefined values in this field, which made the driver reject them. To fix this regression, restore the old behaviour, i.e., assume that a device with an unknown bInterfaceProtocol field (other than UAC_VERSION_2) has more or less UAC-v1-compatible descriptors. [compile warning fixes by tiwai] Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: Daniel Mack <daniel@caiaq.de> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-03cls_cgroup: Fix rcu lockdep warningLi Zefan
Dave reported an rcu lockdep warning on 2.6.35.4 kernel task->cgroups and task->cgroups->subsys[i] are protected by RCU. So we avoid accessing invalid pointers here. This might happen, for example, when you are deref-ing those pointers while someone move @task from one cgroup to another. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-03be2net: remove a BUG_ON in be_cmds.cAjit Khaparde
Async notifications other than link status are possible in certain configurations. Remove the BUG_ON in the mcc completion processing path. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-03be2net: fix a bug in UE detection logicAjit Khaparde
The ONLINE registers can return 0xFFFFFFFF on more than one occassion. On systems that care, reading these registers could lead to problems. So the new code decides that the ASIC has encountered and error by reading the UE_STATUS_LOW/HIGH registers. AND them with the mask values and a non-zero result indicates an error. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-03be2net: fix net-snmp error because of wrong packet statsAjit Khaparde
Wrong packet statistics for multicast Rx was causing net-snmp error messages every 15 seconds. Instead of picking the multicast stats from hardware, now maintain it in the driver itself. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-03Merge branch '2.6.36-xfs-misc' of ↵Alex Elder
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/xfsdev
2010-09-03xfs: Make fiemap work with sparse filesTao Ma
In xfs_vn_fiemap, we set bvm_count to fi_extent_max + 1 and want to return fi_extent_max extents, but actually it won't work for a sparse file. The reason is that in xfs_getbmap we will calculate holes and set it in 'out', while out is malloced by bmv_count(fi_extent_max+1) which didn't consider holes. So in the worst case, if 'out' vector looks like [hole, extent, hole, extent, hole, ... hole, extent, hole], we will only return half of fi_extent_max extents. This patch add a new parameter BMV_IF_NO_HOLES for bvm_iflags. So with this flags, we don't use our 'out' in xfs_getbmap for a hole. The solution is a bit ugly by just don't increasing index of 'out' vector. I felt that it is not easy to skip it at the very beginning since we have the complicated check and some function like xfs_getbmapx_fix_eof_hole to adjust 'out'. Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-09-03mutex: Fix annotations to include it in kernel-locking docbookRandy Dunlap
Fix kernel-doc notation in linux/mutex.h and kernel/mutex.c, then add these 2 files to the kernel-locking docbook as the Mutex API reference chapter. Add one API function to mutex-design.txt and correct a typo in that file. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Rusty Russell <rusty@rustcorp.com.au> LKML-Reference: <20100902154816.6cc2f9ad.randy.dunlap@oracle.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-03perf, x86: Try to handle unknown nmis with an enabled PMURobert Richter
When the PMU is enabled it is valid to have unhandled nmis, two events could trigger 'simultaneously' raising two back-to-back NMIs. If the first NMI handles both, the latter will be empty and daze the CPU. The solution to avoid an 'unknown nmi' massage in this case was simply to stop the nmi handler chain when the PMU is enabled by stating the nmi was handled. This has the drawback that a) we can not detect unknown nmis anymore, and b) subsequent nmi handlers are not called. This patch addresses this. Now, we check this unknown NMI if it could be a PMU back-to-back NMI. Otherwise we pass it and let the kernel handle the unknown nmi. This is a debug log: cpu #6, nmi #32333, skip_nmi #32330, handled = 1, time = 1934364430 cpu #6, nmi #32334, skip_nmi #32330, handled = 1, time = 1934704616 cpu #6, nmi #32335, skip_nmi #32336, handled = 2, time = 1936032320 cpu #6, nmi #32336, skip_nmi #32336, handled = 0, time = 1936034139 cpu #6, nmi #32337, skip_nmi #32336, handled = 1, time = 1936120100 cpu #6, nmi #32338, skip_nmi #32336, handled = 1, time = 1936404607 cpu #6, nmi #32339, skip_nmi #32336, handled = 1, time = 1937983416 cpu #6, nmi #32340, skip_nmi #32341, handled = 2, time = 1938201032 cpu #6, nmi #32341, skip_nmi #32341, handled = 0, time = 1938202830 cpu #6, nmi #32342, skip_nmi #32341, handled = 1, time = 1938443743 cpu #6, nmi #32343, skip_nmi #32341, handled = 1, time = 1939956552 cpu #6, nmi #32344, skip_nmi #32341, handled = 1, time = 1940073224 cpu #6, nmi #32345, skip_nmi #32341, handled = 1, time = 1940485677 cpu #6, nmi #32346, skip_nmi #32347, handled = 2, time = 1941947772 cpu #6, nmi #32347, skip_nmi #32347, handled = 1, time = 1941949818 cpu #6, nmi #32348, skip_nmi #32347, handled = 0, time = 1941951591 Uhhuh. NMI received for unknown reason 00 on CPU 6. Do you have a strange power saving mode enabled? Dazed and confused, but trying to continue Deltas: nmi #32334 340186 nmi #32335 1327704 nmi #32336 1819 <<<< back-to-back nmi [1] nmi #32337 85961 nmi #32338 284507 nmi #32339 1578809 nmi #32340 217616 nmi #32341 1798 <<<< back-to-back nmi [2] nmi #32342 240913 nmi #32343 1512809 nmi #32344 116672 nmi #32345 412453 nmi #32346 1462095 <<<< 1st nmi (standard) handling 2 counters nmi #32347 2046 <<<< 2nd nmi (back-to-back) handling one counter nmi #32348 1773 <<<< 3rd nmi (back-to-back) handling no counter! [3] For back-to-back nmi detection there are the following rules: The PMU nmi handler was handling more than one counter and no counter was handled in the subsequent nmi (see [1] and [2] above). There is another case if there are two subsequent back-to-back nmis [3]. The 2nd is detected as back-to-back because the first handled more than one counter. If the second handles one counter and the 3rd handles nothing, we drop the 3rd nmi because it could be a back-to-back nmi. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> [ renamed nmi variable to pmu_nmi to avoid clash with .nmi in entry.S ] Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: peterz@infradead.org Cc: gorcunov@gmail.com Cc: fweisbec@gmail.com Cc: ying.huang@intel.com Cc: ming.m.lin@intel.com Cc: eranian@google.com LKML-Reference: <1283454469-1909-3-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-03perf, x86: Fix handle_irq return valuesPeter Zijlstra
Now that we rely on the number of handled overflows, ensure all handle_irq implementations actually return the right number. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: peterz@infradead.org Cc: robert.richter@amd.com Cc: gorcunov@gmail.com Cc: fweisbec@gmail.com Cc: ying.huang@intel.com Cc: ming.m.lin@intel.com Cc: eranian@google.com LKML-Reference: <1283454469-1909-4-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-03perf, x86: Fix accidentally ack'ing a second event on intel perf counterDon Zickus
During testing of a patch to stop having the perf subsytem swallow nmis, it was uncovered that Nehalem boxes were randomly getting unknown nmis when using the perf tool. Moving the ack'ing of the PMI closer to when we get the status allows the hardware to properly re-set the PMU bit signaling another PMI was triggered during the processing of the first PMI. This allows the new logic for dealing with the shortcomings of multiple PMIs to handle the extra NMI by 'eat'ing it later. Now one can wonder why are we getting a second PMI when we disable all the PMUs in the begining of the NMI handler to prevent such a case, for that I do not know. But I know the fix below helps deal with this quirk. Tested on multiple Nehalems where the problem was occuring. With the patch, the code now loops a second time to handle the second PMI (whereas before it was not). Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: peterz@infradead.org Cc: robert.richter@amd.com Cc: gorcunov@gmail.com Cc: fweisbec@gmail.com Cc: ying.huang@intel.com Cc: ming.m.lin@intel.com Cc: eranian@google.com LKML-Reference: <1283454469-1909-2-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-03Merge remote branch 'nouveau/for-airlied' of /ssd/git/drm-nouveau-next into ↵Dave Airlie
drm-fixes * 'nouveau/for-airlied' of /ssd/git/drm-nouveau-next: drm/nv50: initialize ramht_refs list for faked 0 channel drm/nouveau: Don't take struct_mutex around the pushbuf IOCTL. drm/nouveau: Take fence spinlock before reading the last sequence.
2010-09-03xfs: prevent 32bit overflow in space reservationDave Chinner
If we attempt to preallocate more than 2^32 blocks of space in a single syscall, the transaction block reservation will overflow leading to a hangs in the superblock block accounting code. This is trivially reproduced with xfs_io. Fix the problem by capping the allocation reservation to the maximum number of blocks a single xfs_bmapi() call can allocate (2^21 blocks). Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-09-03drm/nv50: initialize ramht_refs list for faked 0 channelMarcin Slusarz
We need it for PFIFO_INTR_CACHE_ERROR interrupt handling, because nouveau_fifo_swmthd looks for matching gpuobj in ramht_refs list. It fixes kernel panic in nouveau_gpuobj_ref_find. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-03drm/nouveau: Don't take struct_mutex around the pushbuf IOCTL.Francisco Jerez
We don't need it and it can lead to lock order inversions with respect to drm_global_mutex, potentially causing dead locks. Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-03drm/nouveau: Take fence spinlock before reading the last sequence.Francisco Jerez
It fixes a race between the TTM delayed work queue and the GEM IOCTLs (fdo bug 29583) uncovered by the BKL removal. Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-02RDMA/cxgb3: Don't exceed the max HW CQ depthSteve Wise
The max depth supported by T3 is 64K entries. This fixes a bug introduced in commit 9918b28d ("RDMA/cxgb3: Increase the max CQ depth") that causes stalls and possibly crashes in large MPI clusters. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Cc: <stable@kernel.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-09-02[SCSI] sd, sym53c8xx: Remove warnings after vsprintf %pV introducation.David Miller
GCC warns about empty printf format strings, and after the addition of %pV these existing such cases in the scsi driver layer were exposed enough for the compiler to start seeing them. Based almost entirely upon a patch by Joe Perches. [jejb: fix up sym53c8xx msg] Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-02pkt_sched: Fix lockdep warning on est_tree_lock in gen_estimatorJarek Poplawski
This patch fixes a lockdep warning: [ 516.287584] ========================================================= [ 516.288386] [ INFO: possible irq lock inversion dependency detected ] [ 516.288386] 2.6.35b #7 [ 516.288386] --------------------------------------------------------- [ 516.288386] swapper/0 just changed the state of lock: [ 516.288386] (&qdisc_tx_lock){+.-...}, at: [<c12eacda>] est_timer+0x62/0x1b4 [ 516.288386] but this lock took another, SOFTIRQ-unsafe lock in the past: [ 516.288386] (est_tree_lock){+.+...} [ 516.288386] [ 516.288386] and interrupts could create inverse lock ordering between them. ... So, est_tree_lock needs BH protection because it's taken by qdisc_tx_lock, which is used both in BH and process contexts. (Full warning with this patch at netdev, 02 Sep 2010.) Fixes commit: ae638c47dc040b8def16d05dc6acdd527628f231 ("pkt_sched: gen_estimator: add a new lock") Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-02[SCSI] Fix warning: zero-length gnu_printf format stringJean Sacren
warning: zero-length gnu_printf format string Fix the above warning by inserting a space into the literal string. Signed-off-by: Jean Sacren <sakiwit@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-02[SCSI] hpsa: disable doorbell reset on reset_devicesStephen M. Cameron
The doorbell reset initially appears to work correctly, the controller resets, comes up, some i/o can even be done, but on at least some Smart Arrays in some servers, it eventually causes a subsequent controller lockup due to some kind of PCIe error, and kdump can end up leaving the root filesystem in an unbootable state. For this reason, until the problem is fixed, or at least isolated to certain hardware enough to be avoided, the doorbell reset should not be used at all. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-02[SCSI] be2iscsi: Fix for Login failureJayamohan Kallickal
The current code in tree has problems with Login. This patch fixes the Login Failure . Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com> [mnc: Can't believe I missed that.] Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-02[SCSI] fix bio.bi_rw handlingJiri Slaby
Return of the bi_rw tests is no longer bool after commit 74450be1. So testing against constants doesn't make sense anymore. Fix this bug in osd_req_read by removing "== 1" in test. This is not a problem now, where REQ_WRITE is 1, but this can change in the future and we don't want to rely on that. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-02nfsd4: mask out non-access bits in nfs4_access_to_omodeJ. Bruce Fields
This fixes an unnecessary BUG(). Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-09-02ipvs: avoid oops for passive FTPJulian Anastasov
Fix Passive FTP problem in ip_vs_ftp: - Do not oops in nf_nat_set_seq_adjust (adjust_tcp_sequence) when iptable_nat module is not loaded Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-02Revert "sky2: don't do GRO on second port"David S. Miller
This reverts commit de6be6c1f77798c4da38301693d33aff1cd76e84. After some discussion with Jarek Poplawski and Eric Dumazet, we've decided that this change is incorrect. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-02ARM: 6352/1: perf: fix event validationWill Deacon
The validate_event function in the ARM perf events backend has the following problems: 1.) Events that are disabled count towards the cost. 2.) Events associated with other PMUs [for example, software events or breakpoints] do not count towards the cost, but do fail validation, causing the group to fail. This patch changes validate_event so that it ignores events in the PERF_EVENT_STATE_OFF state or that are scheduled for other PMUs. Reported-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Jamie Iles <jamie.iles@picochip.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-02xfs: Disallow 32bit project quota idArkadiusz Mi?kiewicz
Currently on-disk structure is able to keep only 16bit project quota id, so disallow 32bit ones. This fixes a problem where parts of kernel structures holding project quota id are 32bit while parts (on-disk) are 16bit variables which causes project quota member files to be inaccessible for some operations (like mv/rm). Signed-off-by: Arkadiusz Mi?kiewicz <arekm@maven.pl> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-09-02ARM: 6344/1: Mark CPU_32v6K as depended on CPU_V7Catalin Marinas
CPU_32v6K is selected by CPU_V7 but it only depends on CPU_V6. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit (git 2.34.1) at 2025-07-18 23:13:42 +0000