summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-01-19Merge tag 'for-linus-4.10-rc4-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fix from Juergen Gross: "A fix for Xen running in nested virtualization environment" * tag 'for-linus-4.10-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: partially revert "xen: Remove event channel notification through Xen PCI platform device"
2017-01-19arm64: avoid returning from bad_modeMark Rutland
Generally, taking an unexpected exception should be a fatal event, and bad_mode is intended to cater for this. However, it should be possible to contain unexpected synchronous exceptions from EL0 without bringing the kernel down, by sending a SIGILL to the task. We tried to apply this approach in commit 9955ac47f4ba1c95 ("arm64: don't kill the kernel on a bad esr from el0"), by sending a signal for any bad_mode call resulting from an EL0 exception. However, this also applies to other unexpected exceptions, such as SError and FIQ. The entry paths for these exceptions branch to bad_mode without configuring the link register, and have no kernel_exit. Thus, if we take one of these exceptions from EL0, bad_mode will eventually return to the original user link register value. This patch fixes this by introducing a new bad_el0_sync handler to cater for the recoverable case, and restoring bad_mode to its original state, whereby it calls panic() and never returns. The recoverable case branches to bad_el0_sync with a bl, and returns to userspace via the usual ret_to_user mechanism. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Fixes: 9955ac47f4ba1c95 ("arm64: don't kill the kernel on a bad esr from el0") Reported-by: Mark Salter <msalter@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Cc: stable@vger.kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-01-19HID: wacom: Fix sibling detection regressionJason Gerecke
Commit 345857b ("HID: wacom: generic: Add support for sensor offsets") included a change to the operation and location of the call to 'wacom_add_shared_data' in 'wacom_parse_and_register'. The modifications included moving it higher up so that it would occur before the call to 'wacom_retrieve_hid_descriptor'. This was done to prevent a crash that would have occured when the report containing tablet offsets was fed into the driver with 'wacom_hid_report_raw_event' (specifically: the various 'wacom_wac_*_report' functions were written with the assumption that they would only be called once tablet setup had completed; 'wacom_wac_pen_report' in particular dereferences 'shared' which wasn't yet allocated). Moving the call to 'wacom_add_shared_data' effectively prevented the crash but also broke the sibiling detection code which assumes that the HID descriptor has been read and the various device_type flags set. To fix this situation, we restore the original 'wacom_add_shared_data' operation and location and instead implement an alternative change that can also prevent the crash. Specifically, we notice that the report functions mentioned above expect to be called only for input reports. By adding a check, we can prevent feature reports (such as the offset report) from causing trouble. Fixes: 345857bb49 ("HID: wacom: generic: Add support for sensor offsets") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Tested-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-01-18ARC: Revert "ARC: mm: IOC: Don't enable IOC by default"Vineet Gupta
The programming model has been fixed with prev patches so re-enable it by default This reverts commit 23cb1f644019bac49d87b4dd7c1eac0569cc4f53. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-01-18ARC: mm: split arc_cache_init to allow __init reaping of bulkVineet Gupta
arc_cache_init() is called for each core so can't be tagged __init. However bulk of it is only executed by master core and thus is candidate for __init reaping. So split it up to allow that. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-01-18Merge tag 'omap-for-v4.10/fixes-rc4' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for omaps for v4.10-rc cycle. Mostly a DMA regression fix for omap1, and then a handful of trivial fixes for boards and devices to work: - Fixes TI wilink bluetooth strange platform data baud rate - Remove duplicate pinmux line for am335x-icev2 - Fix omap1 dma regression - Fix uninitialized return value for wkup_m3_ipc_probe() - Fix Ethernet PHY binding typo for dra72-evm - Fix init for omap5 and dra7 sata ports - Fix mmc card detect pin for Logic PD SOM-LV * tag 'omap-for-v4.10/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap3: Fix Card Detect and Write Protect on Logic PD SOM-LV ARM: dts: OMAP5 / DRA7: indicate that SATA port 0 is available. ARM: dts: dra72-evm-revc: fix typo in ethernet-phy node soc: ti: wkup_m3_ipc: Fix error return code in wkup_m3_ipc_probe() ARM: OMAP1: DMA: Correct the number of logical channels ARM: dts: am335x-icev2: Remove the duplicated pinmux setting ARM: OMAP2+: Fix WL1283 Bluetooth Baud Rate Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-18ARCv2: IOC: Use actual memory size to setup aperture sizeVineet Gupta
vs. fixed 512M before. But this still assumes that all of memory is under IOC which may not be true for the SoC. Improve that later when this becomes a real issue, by specifying this from DT. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-01-18ARCv2: IOC: Adhere to progamming model guidelines to avoid DMA corruptionVineet Gupta
On AXS103 release bitfiles, DMA data corruptions were seen because IOC setup was not following the recommended way in documentation. Flipping IOC on when caches are enabled or coherency transactions are in flight, might cause some of the memory operations to not observe coherency as expected. So strictly follow the programming model recommendations as documented in comment header above arc_ioc_setup() Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-01-18ARCv2: IOC: refactor the IOC and SLC operations into own functionsVineet Gupta
- Move IOC setup into arc_ioc_setup() - Move SLC disabling into arc_slc_disable() Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-01-18blk-mq: Remove unused variableKeith Busch
Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-18Merge tag 'upstream-4.10-rc5' of git://git.infradead.org/linux-ubifsLinus Torvalds
Pull UBIFS fixes from Richard Weinberger: "This contains fixes for UBIFS: - a long standing issue in UBIFS journal replay code - fallout from the merge window" * tag 'upstream-4.10-rc5' of git://git.infradead.org/linux-ubifs: ubifs: Fix journal replay wrt. xattr nodes ubifs: remove redundant checks for encryption key ubifs: allow encryption ioctls in compat mode ubifs: add CONFIG_BLOCK dependency for encryption ubifs: fix unencrypted journal write ubifs: ensure zero err is returned on successful return
2017-01-18xfs: fix xfs_mode_to_ftype() prototypeArnd Bergmann
A harmless warning just got introduced: fs/xfs/libxfs/xfs_dir2.h:40:8: error: type qualifiers ignored on function return type [-Werror=ignored-qualifiers] Removing the 'const' modifier avoids the warning and has no other effect. Fixes: 1fc4d33fed12 ("xfs: replace xfs_mode_to_ftype table with switch statement") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-01-18Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "A few ARM fixes: - fix a crash while performing TLB maintanence on early ARM SMP cores - blacklist Scorpion CPUs for hardware breakpoints - ARMs asm/types.h has been included as part of the UAPI due to the way the makefiles work, move it to uapi/asm/types.h to make it official - fix up ftrace syscall name matching" * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8613/1: Fix the uaccess crash on PB11MPCore MAINTAINERS: update rmk's entries ARM: put types.h in uapi ARM: 8634/1: hw_breakpoint: blacklist Scorpion CPUs ARM: 8632/1: ftrace: fix syscall name matching
2017-01-18ARC: module: Fix !CONFIG_ARC_DW2_UNWIND buildsVineet Gupta
commit d65283f7b695b5 added mod->arch.secstr under CONFIG_ARC_DW2_UNWIND, but used it unconditionally which broke builds when the option was disabled. Fix that by adjusting the #ifdef guard. And while at it add a missing guard (for unwinder) in module.c as well Reported-by: Waldemar Brodkorb <wbx@openadk.org> Cc: stable@vger.kernel.org #4.9 Fixes: d65283f7b695b5 ("ARC: module: elide loop to save reference to .eh_frame") Tested-by: Anton Kolesov <akolesov@synopsys.com> Reviewed-by: Alexey Brodkin <abrodkin@synopsys.com> [abrodkin: provided fixlet to Kconfig per failure in allnoconfig build] Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-01-18Merge branch 'smp-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull SMP hotplug update from Thomas Gleixner: "This contains a trivial typo fix and an extension to the core code for dynamically allocating states in the prepare stage. The extension is necessary right now because we need a proper way to unbreak LTTNG, which iscurrently non functional due to the removal of the notifiers. Surely it's out of tree, but it's widely used by distros. The simple solution would have been to reserve a state for LTTNG, but I'm not fond about unused crap in the kernel and the dynamic range, which we admittedly should have done right away, allows us to remove quite some of the hardcoded states, i.e. those which have no ordering requirements. So doing the right thing now is better than having an smaller intermediate solution which needs to be reworked anyway" * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu/hotplug: Provide dynamic range for prepare stage perf/x86/amd/ibs: Fix typo after cleanup state names in cpu/hotplug
2017-01-18Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Ingo Molnar: "Fix a crash in the ARM-Exynos clocksource driver, triggered by CPU hotplug operations" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/exynos_mct: Clear interrupt when cpu is shut down
2017-01-18Merge branch 'rcu-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU fixes from Ingo Molnar: "This fixes sporadic ACPI related hangs in synchronize_rcu() that were caused by the ACPI code mistakenly relying on an aspect of RCU that was neither promised to work nor reliable but which happened to work - until in v4.9 we changed the RCU implementation, which made the hangs more prominent. Since the mis-use of the RCU facility wasn't properly detected and prevented either, these fixes make the RCU side work reliably instead of working around the problem in the ACPI code. Hence the slightly larger diffstat that goes beyond the normal scope of RCU fixes in -rc kernels" * 'rcu-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rcu: Narrow early boot window of illegal synchronous grace periods rcu: Remove cond_resched() from Tiny synchronize_sched()
2017-01-18Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "An Intel PMU driver hotplug fix and three 'perf probe' tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Handle exclusive threadid correctly on CPU hotplug perf probe: Fix to probe on gcc generated functions in modules perf probe: Add error checks to offline probe post-processing perf probe: Fix to show correct locations for events on modules
2017-01-18arm64/ptrace: Reject attempts to set incomplete hardware breakpoint fieldsDave Martin
We cannot preserve partial fields for hardware breakpoints, because the values written by userspace to the hardware breakpoint registers can't subsequently be recovered intact from the hardware. So, just reject attempts to write incomplete fields with -EINVAL. Cc: <stable@vger.kernel.org> # 3.7.x- Fixes: 478fcb2cdb23 ("arm64: Debugging support") Signed-off-by: Dave Martin <Dave.Martin@arm.com> Acked-by: Will Deacon <Will.Deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-01-18arm64/ptrace: Avoid uninitialised struct padding in fpr_set()Dave Martin
This patch adds an explicit __reserved[] field to user_fpsimd_state to replace what was previously unnamed padding. This ensures that data in this region are propagated across assignment rather than being left possibly uninitialised at the destination. Cc: <stable@vger.kernel.org> # 3.7.x- Fixes: 60ffc30d5652 ("arm64: Exception handling") Signed-off-by: Dave Martin <Dave.Martin@arm.com> Acked-by: Will Deacon <Will.Deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-01-18arm64/ptrace: Preserve previous registers for short regset writeDave Martin
Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the registers, the thread's old registers are preserved. Cc: <stable@vger.kernel.org> # 4.3.x- Fixes: 5d220ff9420f ("arm64: Better native ptrace support for compat tasks") Signed-off-by: Dave Martin <Dave.Martin@arm.com> Acked-by: Will Deacon <Will.Deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-01-18arm64/ptrace: Preserve previous registers for short regset writeDave Martin
Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the registers, the thread's old registers are preserved. Cc: <stable@vger.kernel.org> # 3.19.x- Fixes: 766a85d7bc5d ("arm64: ptrace: add NT_ARM_SYSTEM_CALL regset") Signed-off-by: Dave Martin <Dave.Martin@arm.com> Acked-by: Will Deacon <Will.Deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-01-18arm64/ptrace: Preserve previous registers for short regset writeDave Martin
Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the registers, the thread's old registers are preserved. Cc: <stable@vger.kernel.org> # 3.7.x- Fixes: 478fcb2cdb23 ("arm64: Debugging support") Signed-off-by: Dave Martin <Dave.Martin@arm.com> Acked-by: Will Deacon <Will.Deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-01-18ceph: fix bad endianness handling in parse_reply_info_extraJeff Layton
sparse says: fs/ceph/mds_client.c:291:23: warning: restricted __le32 degrades to integer fs/ceph/mds_client.c:293:28: warning: restricted __le32 degrades to integer fs/ceph/mds_client.c:294:28: warning: restricted __le32 degrades to integer fs/ceph/mds_client.c:296:28: warning: restricted __le32 degrades to integer The op value is __le32, so we need to convert it before comparing it. Cc: stable@vger.kernel.org # needs backporting for < 3.14 Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-01-18ceph: fix endianness bug in frag_tree_split_cmpJeff Layton
sparse says: fs/ceph/inode.c:308:36: warning: incorrect type in argument 1 (different base types) fs/ceph/inode.c:308:36: expected unsigned int [unsigned] [usertype] a fs/ceph/inode.c:308:36: got restricted __le32 [usertype] frag fs/ceph/inode.c:308:46: warning: incorrect type in argument 2 (different base types) fs/ceph/inode.c:308:46: expected unsigned int [unsigned] [usertype] b fs/ceph/inode.c:308:46: got restricted __le32 [usertype] frag We need to convert these values to host-endian before calling the comparator. Fixes: a407846ef7c6 ("ceph: don't assume frag tree splits in mds reply are sorted") Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-01-18ceph: fix endianness of getattr mask in ceph_d_revalidateJeff Layton
sparse says: fs/ceph/dir.c:1248:50: warning: incorrect type in assignment (different base types) fs/ceph/dir.c:1248:50: expected restricted __le32 [usertype] mask fs/ceph/dir.c:1248:50: got int [signed] [assigned] mask Fixes: 200fd27c8fa2 ("ceph: use lookup request to revalidate dentry") Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-01-18libceph: make sure ceph_aes_crypt() IV is alignedIlya Dryomov
... otherwise the crypto stack will align it for us with a GFP_ATOMIC allocation and a memcpy() -- see skcipher_walk_first(). Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-01-18ceph: fix ceph_get_caps() interruptionYan, Zheng
Commit 5c341ee32881 ("ceph: fix scheduler warning due to nested blocking") causes infinite loop when process is interrupted. Fix it. Signed-off-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-01-18x86/ioapic: Restore IO-APIC irq_chip retrigger callbackRuslan Ruslichenko
commit d32932d02e18 removed the irq_retrigger callback from the IO-APIC chip and did not add it to the new IO-APIC-IR irq chip. Unfortunately the software resend fallback is not enabled on X86, so edge interrupts which are received during the lazy disabled state of the interrupt line are not retriggered and therefor lost. Restore the callbacks. [ tglx: Massaged changelog ] Fixes: d32932d02e18 ("x86/irq: Convert IOAPIC to use hierarchical irqdomain interfaces") Signed-off-by: Ruslan Ruslichenko <rruslich@cisco.com> Cc: xe-linux-external@cisco.com Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1484662432-13580-1-git-send-email-rruslich@cisco.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-01-18ovl: fix possible use after free on redirect dir lookupAmir Goldstein
ovl_lookup_layer() iterates on path elements of d->name.name but also frees and allocates a new pointer for d->name.name. For the case of lookup in upper layer, the initial d->name.name pointer is stable (dentry->d_name), but for lower layers, the initial d->name.name can be d->redirect, which can be freed during iteration. [SzM] Keep the count of remaining characters in the redirect path and calculate the current position from that. This works becuase only the prefix is modified, the ending always stays the same. Fixes: 02b69b284cd7 ("ovl: lookup redirects") Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-01-18arm64: mm: avoid name clash in __page_to_voff()Oleksandr Andrushchenko
The arm64 __page_to_voff() macro takes a parameter called 'page', and also refers to 'struct page'. Thus, if the value passed in is not called 'page', we'll refer to the wrong struct name (which might not exist). Fixes: 3fa72fe9c614 ("arm64: mm: fix __page_to_voff definition") Acked-by: Mark Rutland <mark.rutland@arm.com> Suggested-by: Volodymyr Babchuk <Volodymyr_Babchuk@epam.com> Signed-off-by: Oleksandr Andrushchenko <Oleksandr_Andrushchenko@epam.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-01-18cpu/hotplug: Remove unused but set variable in _cpu_down()Tobias Klauser
After the recent removal of the hotplug notifiers the variable 'hasdied' in _cpu_down() is set but no longer read, leading to the following GCC warning when building with 'make W=1': kernel/cpu.c:767:7: warning: variable ‘hasdied’ set but not used [-Wunused-but-set-variable] Fix it by removing the variable. Fixes: 530e9b76ae8f ("cpu/hotplug: Remove obsolete cpu hotplug register/unregister functions") Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20170117143501.20893-1-tklauser@distanz.ch Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-01-18powerpc/perf: Use MSR to report privilege level on P9 DD1Madhavan Srinivasan
SIER and SIAR are not updated correctly for some samples, so force the use of MSR and regs->nip instead for misc_flag updates. This is done by adding a new ppmu flag and updating the use_siar logic in perf_read_regs() to use it, and dropping the PPMU_HAS_SIER flag. Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> [mpe: Rename flag to PPMU_NO_SIAR, and also drop PPMU_HAS_SIER] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-18selftest/powerpc: Wrong PMC initialized in pmc56_overflow testMadhavan Srinivasan
Test uses PMC2 to count the event. But PMC1 is being initialized. Patch to fix it. Fixes: 3752e453f6ba ('selftests/powerpc: Add tests of PMU EBBs') Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-18powerpc/eeh: Enable IO path on permanent errorGavin Shan
We give up recovery on permanent error, simply shutdown the affected devices and remove them. If the devices can't be put into quiet state, they spew more traffic that is likely to cause another unexpected EEH error. This was observed on "p8dtu2u" machine: 0002:00:00.0 PCI bridge: IBM Device 03dc 0002:01:00.0 Ethernet controller: Intel Corporation \ Ethernet Controller X710/X557-AT 10GBASE-T (rev 02) 0002:01:00.1 Ethernet controller: Intel Corporation \ Ethernet Controller X710/X557-AT 10GBASE-T (rev 02) 0002:01:00.2 Ethernet controller: Intel Corporation \ Ethernet Controller X710/X557-AT 10GBASE-T (rev 02) 0002:01:00.3 Ethernet controller: Intel Corporation \ Ethernet Controller X710/X557-AT 10GBASE-T (rev 02) On P8 PowerNV platform, the IO path is frozen when shutdowning the devices, meaning the memory registers are inaccessible. It is why the devices can't be put into quiet state before removing them. This fixes the issue by enabling IO path prior to putting the devices into quiet state. Reported-by: Pridhiviraj Paidipeddi <ppaidipe@linux.vnet.ibm.com> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-18powerpc/perf: Fix PM_BRU_CMPL event code for power9Madhavan Srinivasan
Use 0x10012 event code for PM_BRU_CMPL event in power9 event list instead of current 0x40060. Fixes: 34922527a2bcb ('powerpc/perf: Add power9 event list macros for generic and cache events') Cc: stable@vger.kernel.org # v4.9+ Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-18powerpc/mm: Fix little-endian 4K hugetlbAneesh Kumar K.V
When we switched to big endian page table, we never updated the hugepd format such that it can work for both big endian and little endian config. This patch series update hugepd format such that it is looked at as __be64 value in big endian page table config. This patch also switch hugepd_t.pd from signed long to unsigned long. I did update the FSL hugepd_ok check to check for the top bit instead of checking > 0. Fixes: 5dc1ef858c12 ("powerpc/mm: Use big endian Linux page tables for book3s 64") Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-18powerpc/mm/hugetlb: Don't panic when we don't find the default huge page sizeAneesh Kumar K.V
The generic hugetlbfs code can handle not finding the default huge page size correctly. With HPAGE_SHIFT = 0 we see in dmesg: hugetlbfs: disabling because there are no supported hugepage sizes bash-4.2# echo 30 > /proc/sys/vm/nr_hugepages bash: echo: write error: Operation not supported Fixes: 03bb2d65900c ("powerpc: get hugetlbpage handling more generic") Reported-by: Chris Smart <chris@distroguy.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-18powerpc: Fix pgtable pmd cache initNicholas Piggin
Commit 9b081e10805cd ("powerpc: port 64 bits pgtable_cache to 32 bits") mixed up PMD_INDEX_SIZE and PMD_CACHE_INDEX a couple of times. This resulted in 64s/hash/4k configs to panic at boot with a false positive error check. Fix that and simplify error handling by moving the check to the caller. Fixes: 9b081e10805cd ("powerpc: port 64 bits pgtable_cache to 32 bits") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-17Merge tag 'modules-for-v4.10-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux Pull modules fix from Jessica Yu: - fix out-of-tree module breakage when it supplies its own definitions of true and false * tag 'modules-for-v4.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: taint/module: Fix problems when out-of-kernel driver defines true or false
2017-01-17Merge remote-tracking branch 'mkp-scsi/fixes' into fixesJames Bottomley
2017-01-17ARM: dts: omap3: Fix Card Detect and Write Protect on Logic PD SOM-LVAdam Ford
This fixes commit ab8dd3aed011 ("ARM: DTS: Add minimal Support for Logic PD DM3730 SOM-LV") where the Card Detect and Write Protect pins were improperly configured. Fixes: ab8dd3aed011 ("ARM: DTS: Add minimal Support for Logic PD DM3730 SOM-LV") Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-01-17ARM64: dts: meson-gxbb-odroidc2: Disable SCPI DVFSNeil Armstrong
The current hardware is not able to run with all cores enabled at a cluster frequency superior at 1536MHz. But the currently shipped u-boot for the platform still reports an OPP table with possible DVFS frequency up to 2GHz, and will not change since the off-tree linux tree supports limiting the OPPs with a kernel parameter. A recent u-boot change reports the boot-time DVFS around 100MHz and the default performance cpufreq governor sets the maximum frequency. Previous version of u-boot reported to be already at the max OPP and left the OPP as is. Nevertheless, other governors like ondemand could setup the max frequency and make the system crash. This patch disables the DVFS clock and disables cpufreq. Fixes: 70db166a2baa ("ARM64: dts: meson-gxbb: Add SCPI with cpufreq & sensors Nodes") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-17xfs: don't wrap ID in xfs_dq_get_next_idEric Sandeen
The GETNEXTQOTA ioctl takes whatever ID is sent in, and looks for the next active quota for an user equal or higher to that ID. But if we are at the maximum ID and then ask for the "next" one, we may wrap back to zero. In this case, userspace may loop forever, because it will start querying again at zero. We'll fix this in userspace as well, but for the kernel, return -ENOENT if we ask for the next quota ID past UINT_MAX so the caller knows to stop. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-01-17xfs: sanity check inode di_modeAmir Goldstein
Check for invalid file type in xfs_dinode_verify() and fail to load the inode structure from disk. Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-01-17xfs: sanity check inode mode when creating new dentryAmir Goldstein
The helper xfs_dentry_to_name() is used by 2 different classes of callers: Callers that pass zero mode and don't care about the returned name.type field and Callers that pass non zero mode and do care about the name.type field. Change xfs_dentry_to_name() to not take the mode argument and change the call sites of the first class to not pass the mode argument. Create a new helper xfs_dentry_mode_to_name() which does pass the mode argument and returns -EFSCORRUPTED if mode is invalid. Callers that translate non zero mode to on-disk file type now check the return value and will export the error to user instead of staging an invalid file type to be written to directory entry. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-01-17xfs: replace xfs_mode_to_ftype table with switch statementAmir Goldstein
The size of the xfs_mode_to_ftype[] conversion table was too small to handle an invalid value of mode=S_IFMT. Instead of fixing the table size, replace the conversion table with a conversion helper that uses a switch statement. Suggested-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-01-17xfs: add missing include dependencies to xfs_dir2.hAmir Goldstein
xfs_dir2.h dereferences some data types in inline functions and fails to include those type definitions, e.g.: xfs_dir2_data_aoff_t, struct xfs_da_geometry. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-01-17xfs: sanity check directory inode di_sizeAmir Goldstein
This changes fixes an assertion hit when fuzzing on-disk i_mode values. The easy case to fix is when changing an empty file i_mode to S_IFDIR. In this case, xfs_dinode_verify() detects an illegal zero size for directory and fails to load the inode structure from disk. For the case of non empty file whose i_mode is changed to S_IFDIR, the ASSERT() statement in xfs_dir2_isblock() is replaced with return -EFSCORRUPTED, to avoid interacting with corrupted jusk also when XFS_DEBUG is disabled. Suggested-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-01-17xfs: make the ASSERT() condition likelyAmir Goldstein
The ASSERT() condition is the normal case, not the exception, so testing the condition should be likely(), not unlikely(). Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>