summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-01-29powerpc: Fix 32-bit frames for signals delivered when transactionalPaul Mackerras
Commit d31626f70b61 ("powerpc: Don't corrupt transactional state when using FP/VMX in kernel") introduced a bug where the uc_link and uc_regs fields of the ucontext_t that is created to hold the transactional values of the registers in a 32-bit signal frame didn't get set correctly. The reason is that we now clear the MSR_TS bits in the MSR in save_tm_user_regs(), before the code that sets uc_link and uc_regs. To fix this, we move the setting of uc_link and uc_regs into the same if statement that selects whether to call save_tm_user_regs() or save_user_regs(). Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-29powerpc/iommu: Fix initialisation of DART iommu tableAlistair Popple
Commit d084775738b746648d4102337163a04534a02982 switched the generic powerpc iommu backend code to use the it_page_shift field to determine page size. Commit 3a553170d35d69bea3877bffa508489dfa6f133d should have initiliased this field for all platforms, however the DART iommu table code was not updated. This commit initialises the it_page_shift field to 4K for the DART iommu. Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-29powerpc/numa: Fix decimal permissionsJoe Perches
This should have been octal. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-29powerpc/mm: Fix compile error of pgtable-ppc64.hLi Zhong
It seems that forward declaration couldn't work well with typedef, use struct spinlock directly to avoiding following build errors: In file included from include/linux/spinlock.h:81, from include/linux/seqlock.h:35, from include/linux/time.h:5, from include/uapi/linux/timex.h:56, from include/linux/timex.h:56, from include/linux/sched.h:17, from arch/powerpc/kernel/asm-offsets.c:17: include/linux/spinlock_types.h:76: error: redefinition of typedef 'spinlock_t' /root/linux-next/arch/powerpc/include/asm/pgtable-ppc64.h:563: note: previous declaration of 'spinlock_t' was here Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-29powerpc: Fix hw breakpoints on !HAVE_HW_BREAKPOINT configurationsAndreas Schwab
This fixes a logic error that caused a failure to update the hw breakpoint registers when not using the hw-breakpoint interface. Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-29Merge remote-tracking branch 'scott/next' into nextBenjamin Herrenschmidt
<< This contains a fix for a chroma_defconfig build break that was introduced by e6500 tablewalk support, and a device tree binding patch that missed the previous pull request due to some last-minute polishing. >>
2014-01-29Merge remote-tracking branch 'agust/next' into nextBenjamin Herrenschmidt
<< Switch mpc512x to the common clock framework and adapt mpc512x drivers to use the new clock driver. Old PPC_CLOCK code is removed entirely since there are no users any more. >>
2014-01-28Merge tag 'for-linus-20140127' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD updates from Brian Norris: - Add me (Brian Norris) as an additional MTD maintainer (it'd be nice to get David's "ack" for this; I'm sure he approves, but he's been pretty silent lately) - Add Ezequiel Garcie as maintainer for the pxa3xx NAND driver - Last (?) round of pxa3xx improvements for supporting Armada 370/XP - Typical churn in driver boilerplate (OOM messages, printk()'s, devm_*, etc.) - Quad read mode support for SPI NOR driver (m25p80) - Update Davinci NAND driver to prepare for use on new platforms - Begin to kill off NAND_MAX_{PAGE,OOB}SIZE macros; more work is pending - Miscellaneous NAND device support (new IDs) - Add READ RETRY support for Micron MLC NAND - Support new GPMI NAND ECC layout device-tree binding - Avoid mapping stack/vmalloc() memory for GPMI NAND DMA * tag 'for-linus-20140127' of git://git.infradead.org/linux-mtd: (151 commits) mtd: gpmi: add sanity check when mapping DMA for read_buf/write_buf mtd: gpmi: allocate a proper buffer for non ECC read/write mtd: m25p80: Set rx_nbits for Quad SPI transfers mtd: m25p80: Enable Quad SPI read transfers for s25fl512s mtd: s3c2410: Merge plat/regs-nand.h into s3c2410.c mtd: mtdram: add missing 'const' mtd: m25p80: assign default read command mtd: nuc900_nand: remove redundant return value check of platform_get_resource() mtd: plat_nand: remove redundant return value check of platform_get_resource() mtd: nand: add Intel manufacturer ID mtd: nand: add SanDisk manufacturer ID mtd: nand: add support for Samsung K9LCG08U0B mtd: nand: pxa3xx: Add support for 2048 bytes page size devices mtd: m25p80: Use OPCODE_QUAD_READ_4B for 4-byte addressing mtd: nand: don't use {read,write}_buf for 8-bit transfers mtd: nand: use __packed shorthand mtd: nand: support Micron READ RETRY mtd: nand: add generic READ RETRY support mtd: nand: add ONFI vendor block for Micron mtd: nand: localize ECC failures per page ...
2014-01-28Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Pull LED subsystem update from Bryan Wu: "Basically this cycle is mostly cleanup for LED subsystem" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: leds: s3c24xx: Remove hardware.h inclusion leds: replace list_for_each with list_for_each_entry leds: kirkwood: Cleanup in header files leds: pwm: Remove a warning on non-DT platforms leds: leds-pwm: fix duty time overflow. leds: leds-mc13783: Remove unneeded mc13xxx_{un}lock leds: leds-mc13783: Remove duplicate field in platform data drivers: leds: leds-tca6507: check CONFIG_GPIOLIB whether defined for 'gpio_base' leds: lp5523: Support LED MUX configuration on running a pattern leds: lp5521/5523: Fix multiple engine usage bug LEDS: tca6507 - fix up some comments. LEDS: tca6507: add device-tree support for GPIO configuration. LEDS: tca6507 - fix bugs in parsing of device-tree configuration.
2014-01-28Merge tag 'tty-3.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull serial fixes from Greg KH: "Here are tiny and assorted serial driver fixes that have been in a branch in my tree for a while and somehow did not get properly merged into my big TTY / Serial pull request for 3.14-rc1. Sorry about that. All have been in linux-next for a while with no issues" * tag 'tty-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: xuartps: Properly guard sysrq specific code serial: 8250: Fix initialisation of Quatech cards with the AMCC PCI chip serial: icom: dereference after free in load_code() serial: 8250_dw: add new ACPI IDs tty: serial: pch: don't crash if DMA enabled but not loaded serial: samsung: move clock deactivation below uart registration
2014-01-28Merge tag 'clk-for-linus-3.14-part2' of ↵Linus Torvalds
git://git.linaro.org/people/mike.turquette/linux Pull more clock framework changes from Mike Turquette: "The second half of the clock framework pull requeust for 3.14 is dominated by platform support for Qualcomm's MSM SoCs, DT binding updates for TI's OMAP-ish processors and additional support for Samsung chips. Additionally there are other smaller clock driver changes and several last minute fixes. This pull request also includes the HiSilicon support that depends on the already-merged arm-soc pull request" [ Fix up stupid compile error in the source tree with evil merge - Grumpy Linus ] * tag 'clk-for-linus-3.14-part2' of git://git.linaro.org/people/mike.turquette/linux: (49 commits) clk: sort Makefile clk: sunxi: fix overflow when setting up divided factors clk: Export more clk-provider functions dt-bindings: qcom: Fix warning with duplicate dt define clk: si5351: remove variant from platform_data clk: samsung: Remove unneeded semicolon clk: qcom: Fix modular build ARM: OMAP3: use DT clock init if DT data is available ARM: AM33xx: remove old clock data and link in new clock init code ARM: AM43xx: Enable clock init ARM: OMAP: DRA7: Enable clock init ARM: OMAP4: remove old clock data and link in new clock init code ARM: OMAP2+: io: use new clock init API ARM: OMAP2+: PRM: add support for initializing PRCM clock modules from DT ARM: OMAP3: hwmod: initialize clkdm from clkdm_name ARM: OMAP: hwmod: fix an incorrect clk type cast with _get_clkdm ARM: OMAP2+: clock: use driver API instead of direct memory read/write ARM: OMAP2+: clock: add support for indexed memmaps ARM: dts: am43xx clock data ARM: dts: AM35xx: use DT clock data ...
2014-01-28Merge tag 'xfs-for-linus-v3.14-rc1-2' of git://oss.sgi.com/xfs/xfsLinus Torvalds
Pull second xfs update from Ben Myers: "Allow logical sector sized direct io on 'advanced format' 4k/512 disk" * tag 'xfs-for-linus-v3.14-rc1-2' of git://oss.sgi.com/xfs/xfs: xfs: allow logical-sector sized O_DIRECT xfs: rename xfs_buftarg structure members xfs: clean up xfs_buftarg
2014-01-28bnx2x: Fix generic option settingsYaniv Rosner
When user tried to change generic options using "ethtool -s" command, while SFP module is plugged out or during module detection, the command would have failed with "Unsupported port type" message. The fix is to ignore the port option in case it's same as the current port configuration. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-28ceph: Fix up after semantic merge conflictLinus Torvalds
The previous ceph-client merge resulted in ceph not even building, because there was a merge conflict that wasn't visible as an actual data conflict: commit 7221fe4c2ed7 ("ceph: add acl for cephfs") added support for POSIX ACL's into Ceph, but unluckily we also had the VFS tree change a lot of the POSIX ACL helper functions to be much more helpful to filesystems (see for example commits 2aeccbe957d0 "fs: add generic xattr_acl handlers", 5bf3258fd2ac "fs: make posix_acl_chmod more useful" and 37bc15392a23 "fs: make posix_acl_create more useful") The reason this conflict wasn't obvious was many-fold: because it was a semantic conflict rather than a data conflict, it wasn't visible in the git merge as a conflict. And because the VFS tree hadn't been in linux-next, people hadn't become aware of it that way. And because I was at jury duty this morning, I was using my laptop and as a result not doing constant "allmodconfig" builds. Anyway, this fixes the build and generally removes a fair chunk of the Ceph POSIX ACL support code, since the improved helpers seem to match really well for Ceph too. But I don't actually have any way to *test* the end result, and I was really hoping for some ACK's for this. Oh, well. Not compiling certainly doesn't make things easier to test, so I'm committing this without the acks after having waited for four hours... Plus it's what I would have done for the merge had I noticed the semantic conflict.. Reported-by: Dave Jones <davej@redhat.com> Cc: Sage Weil <sage@inktank.com> Cc: Guangliang Zhao <lucienchao@gmail.com> Cc: Li Wang <li.wang@ubuntykylin.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-28net: Fix warning on make htmldocs caused by skbuff.cMasanari Iida
This patch fixed following Warning while executing "make htmldocs". Warning(/net/core/skbuff.c:2164): No description found for parameter 'from' Warning(/net/core/skbuff.c:2164): Excess function parameter 'source' description in 'skb_zerocopy' Replace "@source" with "@from" fixed the warning. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-28Merge tag 'rxrpc-20140126' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== RxRPC fixes Here are some small AF_RXRPC fixes. (1) Fix a place where a spinlock is taken conditionally but is released unconditionally. (2) Fix a double-free that happens when cleaning up on a checksum error. (3) Fix handling of CHECKSUM_PARTIAL whilst delivering messages to userspace. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-29Merge tag 'drm/for-3.14-rc1-20140123' of ↵Dave Airlie
git://anongit.freedesktop.org/tegra/linux into drm-next drm/tegra: Changes for v3.14-rc1 (update) These patches fix some issues caused by the DRM panel support from the previous pull request and add two more panels (for the Toshiba AC100 as well as the Seaboard and Ventana). * tag 'drm/for-3.14-rc1-20140123' of git://anongit.freedesktop.org/tegra/linux: drm/tegra: Obtain head number from DT drm/panel: update EDID BLOB in panel_simple_get_modes() gpu: host1x: Remove unnecessary include drm/tegra: Use proper data type drm/tegra: Clarify how panel modes override others drm/tegra: Fix possible CRTC mask for RGB outputs drm/i915: Use drm_encoder_crtc_ok() drm: Move drm_encoder_crtc_ok() to core drm: provide a helper for the encoder possible_crtcs mask drm/tegra: Don't check resource with devm_ioremap_resource() drm/panel: Add support for Chunghwa CLAA101WA01A panel drm/panel: Add support for Samsung LTN101NT05 panel
2014-01-28llc: remove noisy WARN from llc_mac_hdr_initDave Jones
Sending malformed llc packets triggers this spew, which seems excessive. WARNING: CPU: 1 PID: 6917 at net/llc/llc_output.c:46 llc_mac_hdr_init+0x85/0x90 [llc]() device type not supported: 0 CPU: 1 PID: 6917 Comm: trinity-c1 Not tainted 3.13.0+ #95 0000000000000009 00000000007e257d ffff88009232fbe8 ffffffffac737325 ffff88009232fc30 ffff88009232fc20 ffffffffac06d28d ffff88020e07f180 ffff88009232fec0 00000000000000c8 0000000000000000 ffff88009232fe70 Call Trace: [<ffffffffac737325>] dump_stack+0x4e/0x7a [<ffffffffac06d28d>] warn_slowpath_common+0x7d/0xa0 [<ffffffffac06d30c>] warn_slowpath_fmt+0x5c/0x80 [<ffffffffc01736d5>] llc_mac_hdr_init+0x85/0x90 [llc] [<ffffffffc0173759>] llc_build_and_send_ui_pkt+0x79/0x90 [llc] [<ffffffffc057cdba>] llc_ui_sendmsg+0x23a/0x400 [llc2] [<ffffffffac605d8c>] sock_sendmsg+0x9c/0xe0 [<ffffffffac185a37>] ? might_fault+0x47/0x50 [<ffffffffac606321>] SYSC_sendto+0x121/0x1c0 [<ffffffffac011847>] ? syscall_trace_enter+0x207/0x270 [<ffffffffac6071ce>] SyS_sendto+0xe/0x10 [<ffffffffac74aaa4>] tracesys+0xdd/0xe2 Until 2009, this was a printk, when it was changed in bf9ae5386bc: "llc: use dev_hard_header". Let userland figure out what -EINVAL means by itself. Signed-off-by: Dave Jones <davej@fedoraproject.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-29drm: ast,cirrus,mgag200: use drm_can_sleepDave Airlie
these 3 were checking in_interrupt but we have situations where calling vunmap under this could cause a BUG to be hit in smp_call_function_many. Use the drm_can_sleep macro instead, which should stop this path from been taken in this case. Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-01-29Merge tag 'drm-intel-fixes-2014-01-28' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-next Pile of -fixes all over the place. Lot's of cc: stable. Only big thing is that we've dropped the preliminary hw support tag for bdw - it seems to work. Which also means that I'll shovel a few more bdw patches through -fixes, there's 5 w/a patches from Ken already on intel-gfx. * tag 'drm-intel-fixes-2014-01-28' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: Fix the offset issue for the stolen GEM objects drm/i915: Decouple GPU error reporting from ring initialisation i915: remove pm_qos request on error Revert "drm/i915: Mask reserved bits in display/sprite address registers" drm/i915: VLV2 - Fix hotplug detect bits drm/i915: Allow reading the TIMESTAMP register on Gen8. drm/i915: Repeat evictions whilst pageflip completions are outstanding drm/i915: Wait for completion of pending flips when starved of fences drm/i915: don't disable DP port after a failed link training drm/i915: don't disable the DP port if the link is lost drm/i915: Eliminate lots of WARNs when there's no backlight present drm/i915: g4x/vlv: fix dp aux interrupt mask drm/i915/ppgtt: Defer request freeing on reset i915: send D1 opregion notification drm/i915/bdw: remove preliminary_hw_support flag from BDW drm/i915: Tune down reset_stat output from ERROR to debug drm/i915: Make semaphore modparam RO drm/i915: Fix disabled semaphores drm/i915: Clarify relocation errnos drm/i915: Spelling s/auxilliary/auxiliary/
2014-01-29Merge branch 'drm-armada-fixes' of ↵Dave Airlie
git://ftp.arm.linux.org.uk/~rmk/linux-cubox into drm-next Just one-liner which corrects a select statement for DRM_KMS_FB_HELPER which looks like it was missed in the initial merge. Based on 3.13. * 'drm-armada-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-cubox: (55 commits) DRM: armada: fix missing DRM_KMS_FB_HELPER select
2014-01-29Merge tag 'omapdrm-3.14' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-next omapdrm patches for 3.14 * tag 'omapdrm-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: drm/omap: Enable DT support for DMM drm/omap: fix: change dev_unload order drm/omap: fix: disable encoder before destroying it drm/omap: fix: disconnect devices when omapdrm module is removed drm/omap: fix: Defer probe if an omapdss device requests for it at connect drm/omap: fix (un)registering irqs inside an irq handler Conflicts: drivers/gpu/drm/omapdrm/omap_drv.c
2014-01-29Merge branch 'gma500-next' of git://github.com/patjak/drm-gma500 into drm-nextDave Airlie
Only two patches this time around. One trivial and one locking fix. * 'gma500-next' of git://github.com/patjak/drm-gma500: drm/gma500: Lock struct_mutex around cursor updates drivers: gpu: Mark function as static in cdv_intel_dp.c
2014-01-28x86, intel-mid: Cleanup some platform code's header filesDavid Cohen
platform_ipc.h and platform_msic.h are wrongly declaring functions as external and with 'weak' attribute. This patch does a cleanup on those header files. It should have no functional change. Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Link: http://lkml.kernel.org/r/1390950567-12821-1-git-send-email-david.a.cohen@linux.intel.com Cc: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-01-28Merge branch 'cubox-i-init' into for-linusRussell King
2014-01-28Merge branches 'fixes' and 'misc' into for-linusRussell King
2014-01-28ACPI / init: Flag use of ACPI and ACPI idioms for power supplies to ↵Mark Brown
regulator API There is currently no facility in ACPI to express the hookup of voltage regulators, the expectation is that the regulators that exist in the system will be handled transparently by firmware if they need software control at all. This means that if for some reason the regulator API is enabled on such a system it should assume that any supplies that devices need are provided by the system at all relevant times without any software intervention. Tell the regulator core to make this assumption by calling regulator_has_full_constraints(). Do this as soon as we know we are using ACPI so that the information is available to the regulator core as early as possible. This will cause the regulator core to pretend that there is an always on regulator supplying any supply that is requested but that has not otherwise been mapped which is the behaviour expected on a system with ACPI. Should the ability to specify regulators be added in future revisions of ACPI then once we have support for ACPI mappings in the kernel the same assumptions will apply. It is also likely that systems will default to a mode of operation which does not require any interpretation of these mappings in order to be compatible with existing operating system releases so it should remain safe to make these assumptions even if the mappings exist but are not supported by the kernel. Signed-off-by: Mark Brown <broonie@linaro.org> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-28acpi-cpufreq: De-register CPU notifier and free struct msr on error.Konrad Rzeszutek Wilk
If cpufreq_register_driver() fails we would free the acpi driver related structures but not free the ones allocated by acpi_cpufreq_boost_init() function. This meant that as the driver error-ed out and a CPU online/offline event came we would crash and burn as one of the CPU notifiers would point to garbage. Fixes: cfc9c8ed03e4 (acpi-cpufreq: Adjust the code to use the common boost attribute) Acked-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-28btrfs: undo sysfs when open_ctree() failsAnand Jain
reproducer: mkfs.btrfs -f /dev/sdb &&\ mount /dev/sdb /btrfs &&\ btrfs dev add -f /dev/sdc /btrfs &&\ umount /btrfs &&\ wipefs -a /dev/sdc &&\ mount -o degraded /dev/sdb /btrfs //above mount fails so try with RO mount -o degraded,ro /dev/sdb /btrfs ------ sysfs: cannot create duplicate filename '/fs/btrfs/3f48c79e-5ed0-4e87-b189-86e749e503f4' :: dump_stack+0x49/0x5e warn_slowpath_common+0x87/0xb0 warn_slowpath_fmt+0x41/0x50 strlcat+0x69/0x80 sysfs_warn_dup+0x87/0xa0 sysfs_add_one+0x40/0x50 create_dir+0x76/0xc0 sysfs_create_dir_ns+0x7a/0xc0 kobject_add_internal+0xad/0x220 kobject_add_varg+0x38/0x60 kobject_init_and_add+0x53/0x70 mutex_lock+0x11/0x40 __free_pages+0x25/0x30 free_pages+0x41/0x50 selinux_sb_copy_data+0x14e/0x1e0 mount_fs+0x3e/0x1a0 vfs_kern_mount+0x71/0x120 do_mount+0x3f7/0x980 SyS_mount+0x8b/0xe0 system_call_fastpath+0x16/0x1b ------ further 'modprobe -r btrfs' fails as well Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-01-28Btrfs: fix snprintf usage by send's gen_unique_nameFilipe David Borba Manana
The buffer size argument passed to snprintf must account for the trailing null byte added by snprintf, and it returns a value >= then sizeof(buffer) when the string can't fit in the buffer. Since our buffer has a size of 64 characters, and the maximum orphan name we can generate is 63 characters wide, we must pass 64 as the buffer size to snprintf, and not 63. Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-01-28btrfs: fix defrag 32-bit integer overflowJustin Maggard
When defragging a very large file, the cluster variable can wrap its 32-bit signed int type and become negative, which eventually gets passed to btrfs_force_ra() as a very large unsigned long value. On 32-bit platforms, this eventually results in an Oops from the SLAB allocator. Change the cluster and max_cluster signed int variables to unsigned long to match the readahead functions. This also allows the min() comparison in btrfs_defrag_file() to work as intended. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-01-28btrfs: sysfs: list the NO_HOLES featureDavid Sterba
Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-01-28btrfs: sysfs: don't show reserved incompat featureDavid Sterba
The COMPRESS_LZOv2 incompat featue is currently not implemented, the bit is only reserved, no point to list it in sysfs. Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-01-28btrfs: call permission checks earlier in ioctls and return EPERMDavid Sterba
The owner and capability checks in IOC_SUBVOL_SETFLAGS and SET_RECEIVED_SUBVOL should be called before any other checks are done. Also unify the error code to EPERM. Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-01-28btrfs: restrict snapshotting to own subvolumesDavid Sterba
Currently, any user can snapshot any subvolume if the path is accessible and thus indirectly create and keep files he does not own under his direcotries. This is not possible with traditional directories. In security context, a user can snapshot root filesystem and pin any potentially buggy binaries, even if the updates are applied. All the snapshots are visible to the administrator, so it's possible to verify if there are suspicious snapshots. Another more practical problem is that any user can pin the space used by eg. root and cause ENOSPC. Original report: https://bugs.launchpad.net/ubuntu/+source/apparmor/+bug/484786 CC: stable@vger.kernel.org Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-01-28Btrfs: fix wrong block group in trace during the free space allocationMiao Xie
We allocate the free space from the former block group, not the current one, so should use the former one to output the trace information. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-01-28Btrfs: cleanup the code of used_block_group in find_free_extent()Miao Xie
used_block_group is just used for the space cluster which doesn't belong to the current block group, the other place needn't use it. Or the logic of code seems unclear. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-01-28Btrfs: cleanup the redundant code for the block group allocation and initMiao Xie
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-01-28Btrfs: change the members' order of btrfs_space_info structure to reduce the ↵Miao Xie
cache miss It is better that the position of the lock is close to the data which is protected by it, because they may be in the same cache line, we will load less cache lines when we access them. So we rearrange the members' position of btrfs_space_info structure to make the lock be closer to the its data. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-01-28Btrfs: fix wrong search path initialization before searching tree rootWang Shilong
To search tree root without transaction protection, we should neither search commit root nor skip locking here, fix it. Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-01-28Btrfs: flush the dirty pages of the ordered extent aggressively during ↵Miao Xie
logging csum The performance of fsync dropped down suddenly sometimes, the main reason of this problem was that we might only flush part dirty pages in a ordered extent, then got that ordered extent, wait for the csum calcucation. But if no task flushed the left part, we would wait until the flusher flushed them, sometimes we need wait for several seconds, it made the performance drop down suddenly. (On my box, it drop down from 56MB/s to 4-10MB/s) This patch improves the above problem by flushing left dirty pages aggressively. Test Environment: CPU: 2CPU * 2Cores Memory: 4GB Partition: 20GB(HDD) Test Command: # sysbench --num-threads=8 --test=fileio --file-num=1 \ > --file-total-size=8G --file-block-size=32768 \ > --file-io-mode=sync --file-fsync-freq=100 \ > --file-fsync-end=no --max-requests=10000 \ > --file-test-mode=rndwr run Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-01-28Btrfs: fix transaction abortion when remounting btrfs from RW to ROWang Shilong
Steps to reproduce: # mkfs.btrfs -f /dev/sda8 # mount /dev/sda8 /mnt -o flushoncommit # dd if=/dev/zero of=/mnt/data bs=4k count=102400 & # mount /dev/sda8 /mnt -o remount, ro When remounting RW to RO, the logic is to firstly set flag to RO and then commit transaction, however with option flushoncommit enabled,we will do RO check within committing transaction, so we get a transaction abortion here. Actually,here check is wrong, we should check if FS_STATE_ERROR is set, fix it. Reported-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Suggested-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-01-28Btrfs: faster file extent item search in clone ioctlFilipe David Borba Manana
When we are looking for file extent items that intersect the cloning range, for each one that falls completely outside the range, don't release the path and do another full tree search - just move on to the next slot and copy the file extent item into our buffer only if the item intersects the cloning range. Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-01-28Btrfs: fix extent state leak on transaction abortionLiu Bo
When transaction is aborted, we fail to commit transaction, instead we do cleanup work. After that when we umount btrfs, we get to free fs roots' log trees respectively, but that happens after we unpin extents, so those extents pinned by freeing log trees will remain in memory and lead to the leak. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-01-28btrfs: Cleanup the btrfs_parse_options for remount.Qu Wenruo
Since remount will pending the new mount options to the original mount options, which will make btrfs_parse_options check the old options then new options, causing some stupid output like "enabling XXX" following by "disable XXX". This patch will add extra check before every btrfs_info to skip the output from old options checking. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-01-28btrfs: Add noinode_cache mount optionQu Wenruo
Add noinode_cache mount option for btrfs. Since inode map cache involves all the btrfs_find_free_ino/return_ino things and if just trigger the mount_opt, an inode number get from inode map cache will not returned to inode map cache. To keep the find and return inode both in the same behavior, a new bit in mount_opt, CHANGE_INODE_CACHE, is introduced for this idea. CHANGE_INODE_CACHE is set/cleared in remounting, and the original INODE_MAP_CACHE is set/cleared according to CHANGE_INODE_CACHE after a success transaction. Since find/return inode is all done between btrfs_start_transaction and btrfs_commit_transaction, this will keep consistent behavior. Also noinode_cache mount option will not stop the caching_kthread. Cc: David Sterba <dsterba@suse.cz> Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-01-28Btrfs: fix to search previous metadata extent item since skinny metadataWang Shilong
There is a bug that using btrfs_previous_item() to search metadata extent item. This is because in btrfs_previous_item(), we need type match, however, since skinny metada was introduced by josef, we may mix this two types. So just use btrfs_previous_item() is not working right. To keep btrfs_previous_item() like normal tree search, i introduce another function btrfs_previous_extent_item(). Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-01-28Btrfs: fix missing skinny metadata check in scrub_stripe()Wang Shilong
Check if we support skinny metadata firstly and fix to use right type to search. Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-01-28Btrfs: fix send to not send non-aligned clone operationsFilipe David Borba Manana
It is possible for the send feature to send clone operations that request a cloning range (offset + length) that is not aligned with the block size. This makes the btrfs receive command send issue a clone ioctl call that will fail, as the ioctl will return an -EINVAL error because of the unaligned range. Fix this by not sending clone operations for non block aligned ranges, and instead send regular write operation for these (less common) cases. The following xfstest reproduces this issue, which fails on the second btrfs receive command without this change: seq=`basename $0` seqres=$RESULT_DIR/$seq echo "QA output created by $seq" tmp=`mktemp -d` status=1 # failure is the default! trap "_cleanup; exit \$status" 0 1 2 3 15 _cleanup() { rm -fr $tmp } # get standard environment, filters and checks . ./common/rc . ./common/filter # real QA test starts here _supported_fs btrfs _supported_os Linux _require_scratch _need_to_be_root rm -f $seqres.full _scratch_mkfs >/dev/null 2>&1 _scratch_mount $XFS_IO_PROG -f -c "truncate 819200" $SCRATCH_MNT/foo | _filter_xfs_io $BTRFS_UTIL_PROG filesystem sync $SCRATCH_MNT | _filter_scratch $XFS_IO_PROG -c "falloc -k 819200 667648" $SCRATCH_MNT/foo | _filter_xfs_io $BTRFS_UTIL_PROG filesystem sync $SCRATCH_MNT | _filter_scratch $XFS_IO_PROG -f -c "pwrite 1482752 2978" $SCRATCH_MNT/foo | _filter_xfs_io $BTRFS_UTIL_PROG filesystem sync $SCRATCH_MNT | _filter_scratch $BTRFS_UTIL_PROG subvol snapshot -r $SCRATCH_MNT $SCRATCH_MNT/mysnap1 | \ _filter_scratch $XFS_IO_PROG -f -c "truncate 883305" $SCRATCH_MNT/foo | _filter_xfs_io $BTRFS_UTIL_PROG filesystem sync $SCRATCH_MNT | _filter_scratch $BTRFS_UTIL_PROG subvol snapshot -r $SCRATCH_MNT $SCRATCH_MNT/mysnap2 | \ _filter_scratch $BTRFS_UTIL_PROG send $SCRATCH_MNT/mysnap1 -f $tmp/1.snap 2>&1 | _filter_scratch $BTRFS_UTIL_PROG send -p $SCRATCH_MNT/mysnap1 $SCRATCH_MNT/mysnap2 \ -f $tmp/2.snap 2>&1 | _filter_scratch md5sum $SCRATCH_MNT/foo | _filter_scratch md5sum $SCRATCH_MNT/mysnap1/foo | _filter_scratch md5sum $SCRATCH_MNT/mysnap2/foo | _filter_scratch _scratch_unmount _check_btrfs_filesystem $SCRATCH_DEV _scratch_mkfs >/dev/null 2>&1 _scratch_mount $BTRFS_UTIL_PROG receive $SCRATCH_MNT -f $tmp/1.snap md5sum $SCRATCH_MNT/mysnap1/foo | _filter_scratch $BTRFS_UTIL_PROG receive $SCRATCH_MNT -f $tmp/2.snap md5sum $SCRATCH_MNT/mysnap2/foo | _filter_scratch _scratch_unmount _check_btrfs_filesystem $SCRATCH_DEV status=0 exit The tests expected output is: QA output created by 025 FSSync 'SCRATCH_MNT' FSSync 'SCRATCH_MNT' wrote 2978/2978 bytes at offset 1482752 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) FSSync 'SCRATCH_MNT' Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/mysnap1' FSSync 'SCRATCH_MNT' Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/mysnap2' At subvol SCRATCH_MNT/mysnap1 At subvol SCRATCH_MNT/mysnap2 129b8eaee8d3c2bcad49bec596591cb3 SCRATCH_MNT/foo 42b6369eae2a8725c1aacc0440e597aa SCRATCH_MNT/mysnap1/foo 129b8eaee8d3c2bcad49bec596591cb3 SCRATCH_MNT/mysnap2/foo At subvol mysnap1 42b6369eae2a8725c1aacc0440e597aa SCRATCH_MNT/mysnap1/foo At snapshot mysnap2 129b8eaee8d3c2bcad49bec596591cb3 SCRATCH_MNT/mysnap2/foo Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-01-28Btrfs: fix btrfs boot when compiled as built-inFilipe David Borba Manana
After the change titled "Btrfs: add support for inode properties", if btrfs was built-in the kernel (i.e. not as a module), it would cause a kernel panic, as reported recently by Fengguang: [ 2.024722] BUG: unable to handle kernel NULL pointer dereference at (null) [ 2.027814] IP: [<ffffffff81501594>] crc32c+0xc/0x6b [ 2.028684] PGD 0 [ 2.028684] Oops: 0000 [#1] SMP [ 2.028684] Modules linked in: [ 2.028684] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.13.0-rc7-04795-ga7b57c2 #1 [ 2.028684] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 2.028684] task: ffff88000edba100 ti: ffff88000edd6000 task.ti: ffff88000edd6000 [ 2.028684] RIP: 0010:[<ffffffff81501594>] [<ffffffff81501594>] crc32c+0xc/0x6b [ 2.028684] RSP: 0000:ffff88000edd7e58 EFLAGS: 00010246 [ 2.028684] RAX: 0000000000000000 RBX: ffffffff82295550 RCX: 0000000000000000 [ 2.028684] RDX: 0000000000000011 RSI: ffffffff81efe393 RDI: 00000000fffffffe [ 2.028684] RBP: ffff88000edd7e60 R08: 0000000000000003 R09: 0000000000015d20 [ 2.028684] R10: ffffffff81ef225e R11: ffffffff811b0222 R12: ffffffffffffffff [ 2.028684] R13: 0000000000000239 R14: 0000000000000000 R15: 0000000000000000 [ 2.028684] FS: 0000000000000000(0000) GS:ffff88000fa00000(0000) knlGS:0000000000000000 [ 2.028684] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 2.028684] CR2: 0000000000000000 CR3: 000000000220c000 CR4: 00000000000006f0 [ 2.028684] Stack: [ 2.028684] ffffffff82295550 ffff88000edd7e80 ffffffff8238af62 ffffffff8238ac05 [ 2.028684] 0000000000000000 ffff88000edd7e98 ffffffff8238ac0f ffffffff8238ac05 [ 2.028684] ffff88000edd7f08 ffffffff810002ba ffff88000edd7f00 ffffffff810e2404 [ 2.028684] Call Trace: [ 2.028684] [<ffffffff8238af62>] btrfs_props_init+0x4f/0x96 [ 2.028684] [<ffffffff8238ac05>] ? ftrace_define_fields_btrfs_space_reservation+0x145/0x145 [ 2.028684] [<ffffffff8238ac0f>] init_btrfs_fs+0xa/0xf0 [ 2.028684] [<ffffffff8238ac05>] ? ftrace_define_fields_btrfs_space_reservation+0x145/0x145 [ 2.028684] [<ffffffff810002ba>] do_one_initcall+0xa4/0x13a [ 2.028684] [<ffffffff810e2404>] ? parse_args+0x25f/0x33d [ 2.028684] [<ffffffff8234cf75>] kernel_init_freeable+0x1aa/0x230 [ 2.028684] [<ffffffff8234c785>] ? do_early_param+0x88/0x88 [ 2.028684] [<ffffffff819f61b5>] ? rest_init+0x89/0x89 [ 2.028684] [<ffffffff819f61c3>] kernel_init+0xe/0x109 The issue here is that the initialization function of btrfs (super.c:init_btrfs_fs) started using crc32c (from lib/libcrc32c.c). But when it needs to call crc32c (as part of the properties initialization routine), the libcrc32c is not yet initialized, so crc32c derreferenced a NULL pointer (lib/libcrc32c.c:tfm), causing the kernel panic on boot. The approach to fix this is to use crypto component directly to use its crc32c (which is basically what lib/libcrc32c.c is, a wrapper around crypto). This is what ext4 is doing as well, it uses crypto directly to get crc32c functionality. Verified this works both when btrfs is built-in and when it's loadable kernel module. Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
generated by cgit (git 2.34.1) at 2025-07-19 07:22:50 +0000