summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-12-17s390/dasd: fix list corruption of lcu listStefan Haberland
In dasd_alias_disconnect_device_from_lcu the device is removed from any list on the LCU. Afterwards the LCU is removed from the lcu list if it does not contain devices any longer. The lcu->lock protects the lcu from parallel updates. But to cancel all workers and wait for completion the lcu->lock has to be unlocked. If two devices are removed in parallel and both are removed from the LCU the first device that takes the lcu->lock again will delete the LCU because it is already empty but the second device also tries to free the LCU which leads to a list corruption of the lcu list. Fix by removing the device right before the lcu is checked without unlocking the lcu->lock in between. Fixes: 8e09f21574ea ("[S390] dasd: add hyper PAV support to DASD device driver, part 1") Cc: stable@vger.kernel.org Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-17s390/dasd: fix list corruption of pavgroup group listStefan Haberland
dasd_alias_add_device() moves devices to the active_devices list in case of a scheduled LCU update regardless if they have previously been in a pavgroup or not. Example: device A and B are in the same pavgroup. Device A has already been in a pavgroup and the private->pavgroup pointer is set and points to a valid pavgroup. While going through dasd_add_device it is moved from the pavgroup to the active_devices list. In parallel device B might be removed from the same pavgroup in remove_device_from_lcu() which in turn checks if the group is empty and deletes it accordingly because device A has already been removed from there. When now device A enters remove_device_from_lcu() it is tried to remove it from the pavgroup again because the pavgroup pointer is still set and again the empty group will be cleaned up which leads to a list corruption. Fix by setting private->pavgroup to NULL in dasd_add_device. If the device has been the last device on the pavgroup an empty pavgroup remains but this will be cleaned up by the scheduled lcu_update which iterates over all existing pavgroups. Fixes: 8e09f21574ea ("[S390] dasd: add hyper PAV support to DASD device driver, part 1") Cc: stable@vger.kernel.org Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-17s390/dasd: prevent inconsistent LCU device dataStefan Haberland
Prevent _lcu_update from adding a device to a pavgroup if the LCU still requires an update. The data is not reliable any longer and in parallel devices might have been moved on the lists already. This might lead to list corruptions or invalid PAV grouping. Only add devices to a pavgroup if the LCU is up to date. Additional steps are taken by the scheduled lcu update. Fixes: 8e09f21574ea ("[S390] dasd: add hyper PAV support to DASD device driver, part 1") Cc: stable@vger.kernel.org Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-17s390/dasd: fix hanging device offline processingStefan Haberland
For an LCU update a read unit address configuration IO is required. This is started using sleep_on(), which has early exit paths in case the device is not usable for IO. For example when it is in offline processing. In those cases the LCU update should fail and not be retried. Therefore lcu_update_work checks if EOPNOTSUPP is returned or not. Commit 41995342b40c ("s390/dasd: fix endless loop after read unit address configuration") accidentally removed the EOPNOTSUPP return code from read_unit_address_configuration(), which in turn might lead to an endless loop of the LCU update in offline processing. Fix by returning EOPNOTSUPP again if the device is not able to perform the request. Fixes: 41995342b40c ("s390/dasd: fix endless loop after read unit address configuration") Cc: stable@vger.kernel.org #5.3 Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-17Merge tag 'mailbox-v5.11' of ↵Linus Torvalds
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: - arm: added mhu-v2 controller driver - arm_mhu_db: fix kfree by using devm_ variant - stm32-ipcc: misc cleanup * tag 'mailbox-v5.11' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: arm_mhuv2: Add driver dt-bindings: mailbox : arm,mhuv2: Add bindings mailbox: stm32-ipcc: cast void pointers to unsigned long mailbox: stm32-ipcc: remove duplicate error message mailbox: stm32-ipcc: add COMPILE_TEST dependency mailbox: arm_mhu_db: Fix mhu_db_shutdown by replacing kfree with devm_kfree
2020-12-17Merge tag 'nfs-for-5.11-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client updates from Trond Myklebust: "Highlights include: Features: - NFSv3: Add emulation of lookupp() to improve open_by_filehandle() support - A series of patches to improve readdir performance, particularly with large directories - Basic support for using NFS/RDMA with the pNFS files and flexfiles drivers - Micro-optimisations for RDMA - RDMA tracing improvements Bugfixes: - Fix a long standing bug with xs_read_xdr_buf() when receiving partial pages (Dan Aloni) - Various fixes for getxattr and listxattr, when used over non-TCP transports - Fixes for containerised NFS from Sargun Dhillon - switch nfsiod to be an UNBOUND workqueue (Neil Brown) - READDIR should not ask for security label information if there is no LSM policy (Olga Kornievskaia) - Avoid using interval-based rebinding with TCP in lockd (Calum Mackay) - A series of RPC and NFS layer fixes to support the NFSv4.2 READ_PLUS code - A couple of fixes for pnfs/flexfiles read failover Cleanups: - Various cleanups for the SUNRPC xdr code in conjunction with the READ_PLUS fixes" * tag 'nfs-for-5.11-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (90 commits) NFS/pNFS: Fix a typo in ff_layout_resend_pnfs_read() pNFS/flexfiles: Avoid spurious layout returns in ff_layout_choose_ds_for_read NFSv4/pnfs: Add tracing for the deviceid cache fs/lockd: convert comma to semicolon NFSv4.2: fix error return on memory allocation failure NFSv4.2/pnfs: Don't use READ_PLUS with pNFS yet NFSv4.2: Deal with potential READ_PLUS data extent buffer overflow NFSv4.2: Don't error when exiting early on a READ_PLUS buffer overflow NFSv4.2: Handle hole lengths that exceed the READ_PLUS read buffer NFSv4.2: decode_read_plus_hole() needs to check the extent offset NFSv4.2: decode_read_plus_data() must skip padding after data segment NFSv4.2: Ensure we always reset the result->count in decode_read_plus() SUNRPC: When expanding the buffer, we may need grow the sparse pages SUNRPC: Cleanup - constify a number of xdr_buf helpers SUNRPC: Clean up open coded setting of the xdr_stream 'nwords' field SUNRPC: _copy_to/from_pages() now check for zero length SUNRPC: Cleanup xdr_shrink_bufhead() SUNRPC: Fix xdr_expand_hole() SUNRPC: Fixes for xdr_align_data() SUNRPC: _shift_data_left/right_pages should check the shift length ...
2020-12-17Merge tag 'ceph-for-5.11-rc1' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph updates from Ilya Dryomov: "The big ticket item here is support for msgr2 on-wire protocol, which adds the option of full in-transit encryption using AES-GCM algorithm (myself). On top of that we have a series to avoid intermittent errors during recovery with recover_session=clean and some MDS request encoding work from Jeff, a cap handling fix and assorted observability improvements from Luis and Xiubo and a good number of cleanups. Luis also ran into a corner case with quotas which sadly means that we are back to denying cross-quota-realm renames" * tag 'ceph-for-5.11-rc1' of git://github.com/ceph/ceph-client: (59 commits) libceph: drop ceph_auth_{create,update}_authorizer() libceph, ceph: make use of __ceph_auth_get_authorizer() in msgr1 libceph, ceph: implement msgr2.1 protocol (crc and secure modes) libceph: introduce connection modes and ms_mode option libceph, rbd: ignore addr->type while comparing in some cases libceph, ceph: get and handle cluster maps with addrvecs libceph: factor out finish_auth() libceph: drop ac->ops->name field libceph: amend cephx init_protocol() and build_request() libceph, ceph: incorporate nautilus cephx changes libceph: safer en/decoding of cephx requests and replies libceph: more insight into ticket expiry and invalidation libceph: move msgr1 protocol specific fields to its own struct libceph: move msgr1 protocol implementation to its own file libceph: separate msgr1 protocol implementation libceph: export remaining protocol independent infrastructure libceph: export zero_page libceph: rename and export con->flags bits libceph: rename and export con->state states libceph: make con->state an int ...
2020-12-17Merge tag 'ovl-update-5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs Pull overlayfs updates from Miklos Szeredi: - Allow unprivileged mounting in a user namespace. For quite some time the security model of overlayfs has been that operations on underlying layers shall be performed with the privileges of the mounting task. This way an unprvileged user cannot gain privileges by the act of mounting an overlayfs instance. A full audit of all function calls made by the overlayfs code has been performed to see whether they conform to this model, and this branch contains some fixes in this regard. - Support running on copied filesystem images by optionally disabling UUID verification. - Bug fixes as well as documentation updates. * tag 'ovl-update-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: unprivieged mounts ovl: do not get metacopy for userxattr ovl: do not fail because of O_NOATIME ovl: do not fail when setting origin xattr ovl: user xattr ovl: simplify file splice ovl: make ioctl() safe ovl: check privs before decoding file handle vfs: verify source area in vfs_dedupe_file_range_one() vfs: move cap_convert_nscap() call into vfs_setxattr() ovl: fix incorrect extent info in metacopy case ovl: expand warning in ovl_d_real() ovl: document lower modification caveats ovl: warn about orphan metacopy ovl: doc clarification ovl: introduce new "uuid=off" option for inodes index feature ovl: propagate ovl_fs to ovl_decode_real_fh and ovl_encode_real_fh
2020-12-17Merge tag 'fuse-update-5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse updates from Miklos Szeredi: - Improve performance of virtio-fs in mixed read/write workloads - Try to revalidate cache before returning EEXIST on exclusive create - Add a couple of miscellaneous bug fixes as well as some code cleanups * tag 'fuse-update-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: fix bad inode fuse: support SB_NOSEC flag to improve write performance fuse: add a flag FUSE_OPEN_KILL_SUIDGID for open() request fuse: don't send ATTR_MODE to kill suid/sgid for handle_killpriv_v2 fuse: setattr should set FATTR_KILL_SUIDGID fuse: set FUSE_WRITE_KILL_SUIDGID in cached write path fuse: rename FUSE_WRITE_KILL_PRIV to FUSE_WRITE_KILL_SUIDGID fuse: introduce the notion of FUSE_HANDLE_KILLPRIV_V2 fuse: always revalidate if exclusive create virtiofs: clean up error handling in virtio_fs_get_tree() fuse: add fuse_sb_destroy() helper fuse: simplify get_fuse_conn*() fuse: get rid of fuse_mount refcount virtiofs: simplify sb setup virtiofs fix leak in setup fuse: launder page should wait for page writeback
2020-12-17ACPI: PM: s2idle: Move x86-specific code to the x86 directoryRafael J. Wysocki
Some code in drivers/acpi/sleep.c (which is regarded as a generic file) related to suspend-to-idle support has grown direct dependencies on x86, but in fact it has been specific to x86 (which is the only user of it) anyway for a long time. For this reason, move that code to a separate file under acpi/x86/ and make it build and run as before under the right conditions. While at it, rename a vendor checking function in that code and consistently use acpi_handle_debug() for printing debug-related information in it. No expected functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-12-17Merge tag 'f2fs-for-5.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs updates from Jaegeuk Kim: "In this round, we've made more work into per-file compression support. For example, F2FS_IOC_GET | SET_COMPRESS_OPTION provides a way to change the algorithm or cluster size per file. F2FS_IOC_COMPRESS | DECOMPRESS_FILE provides a way to compress and decompress the existing normal files manually. There is also a new mount option, compress_mode=fs|user, which can control who compresses the data. Chao also added a checksum feature with a mount option so that we are able to detect any corrupted cluster. In addition, Daniel contributed casefolding with encryption patch, which will be used for Android devices. Summary: Enhancements: - add ioctls and mount option to manage per-file compression feature - support casefolding with encryption - support checksum for compressed cluster - avoid IO starvation by replacing mutex with rwsem - add sysfs, max_io_bytes, to control max bio size Bug fixes: - fix use-after-free issue when compression and fsverity are enabled - fix consistency corruption during fault injection test - fix data offset for lseek - get rid of buffer_head which has 32bits limit in fiemap - fix some bugs in multi-partitions support - fix nat entry count calculation in shrinker - fix some stat information And, we've refactored some logics and fix minor bugs as well" * tag 'f2fs-for-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (36 commits) f2fs: compress: fix compression chksum f2fs: fix shift-out-of-bounds in sanity_check_raw_super() f2fs: fix race of pending_pages in decompression f2fs: fix to account inline xattr correctly during recovery f2fs: inline: fix wrong inline inode stat f2fs: inline: correct comment in f2fs_recover_inline_data f2fs: don't check PAGE_SIZE again in sanity_check_raw_super() f2fs: convert to F2FS_*_INO macro f2fs: introduce max_io_bytes, a sysfs entry, to limit bio size f2fs: don't allow any writes on readonly mount f2fs: avoid race condition for shrinker count f2fs: add F2FS_IOC_DECOMPRESS_FILE and F2FS_IOC_COMPRESS_FILE f2fs: add compress_mode mount option f2fs: Remove unnecessary unlikely() f2fs: init dirty_secmap incorrectly f2fs: remove buffer_head which has 32bits limit f2fs: fix wrong block count instead of bytes f2fs: use new conversion functions between blks and bytes f2fs: rename logical_to_blk and blk_to_logical f2fs: fix kbytes written stat for multi-device case ...
2020-12-17Merge tag 'for_v5.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull ext2, reiserfs, quota and writeback updates from Jan Kara: - a couple of quota fixes (mostly for problems found by syzbot) - several ext2 cleanups - one fix for reiserfs crash on corrupted image - a fix for spurious warning in writeback code * tag 'for_v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: writeback: don't warn on an unregistered BDI in __mark_inode_dirty fs: quota: fix array-index-out-of-bounds bug by passing correct argument to vfs_cleanup_quota_inode() reiserfs: add check for an invalid ih_entry_count ext2: Fix fall-through warnings for Clang fs/ext2: Use ext2_put_page docs: filesystems: Reduce ext2.rst to one top-level heading quota: Sanity-check quota file headers on load quota: Don't overflow quota file offsets ext2: Remove unnecessary blank fs/quota: update quota state flags scheme with project quota flags
2020-12-17net/sched: sch_taprio: reset child qdiscs before freeing themDavide Caratti
syzkaller shows that packets can still be dequeued while taprio_destroy() is running. Let sch_taprio use the reset() function to cancel the advance timer and drop all skbs from the child qdiscs. Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler") Link: https://syzkaller.appspot.com/bug?id=f362872379bf8f0017fb667c1ab158f2d1e764ae Reported-by: syzbot+8971da381fb5a31f542d@syzkaller.appspotmail.com Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Link: https://lore.kernel.org/r/63b6d79b0e830ebb0283e020db4df3cdfdfb2b94.1608142843.git.dcaratti@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-17nfp: move indirect block cleanup to flower app stop callbackSimon Horman
The indirect block cleanup may cause control messages to be sent if offloaded flows are present. However, by the time the flower app cleanup callback is called txbufs are no longer available and attempts to send control messages result in a NULL-pointer dereference in nfp_ctrl_tx_one(). This problem may be resolved by moving the indirect block cleanup to the stop callback, where txbufs are still available. As suggested by Jakub Kicinski and Louis Peens. Fixes: a1db217861f3 ("net: flow_offload: fix flow_indr_dev_unregister path") Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: Louis Peens <louis.peens@netronome.com> Link: https://lore.kernel.org/r/20201216145701.30005-1-simon.horman@netronome.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-17octeontx2-af: Fix undetected unmap PF error checkColin Ian King
Currently the check for an unmap PF error is always going to be false because intr_val is a 32 bit int and is being bit-mask checked against 1ULL << 32. Fix this by making intr_val a u64 to match the type at it is copied from, namely npa_event_context->npa_af_rvu_ge. Addresses-Coverity: ("Operands don't affect result") Fixes: f1168d1e207c ("octeontx2-af: Add devlink health reporters for NPA") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: George Cherian <george.cherian@marvell.com> Link: https://lore.kernel.org/r/20201216123604.15369-1-colin.king@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-17Merge tag 'fsnotify_for_v5.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull fsnotify updates from Jan Kara: "A few fsnotify fixes from Amir fixing fallout from big fsnotify overhaul a few months back and an improvement of defaults limiting maximum number of inotify watches from Waiman" * tag 'fsnotify_for_v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: fsnotify: fix events reported to watching parent and child inotify: convert to handle_inode_event() interface fsnotify: generalize handle_inode_event() inotify: Increase default inotify.max_user_watches limit to 1048576
2020-12-17net: nixge: fix spelling mistake in Kconfig: "Instuments" -> "Instruments"Colin Ian King
There is a spelling mistake in the Kconfig. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20201216120020.13149-1-colin.king@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-17qlcnic: Fix error code in probeDan Carpenter
Return -EINVAL if we can't find the correct device. Currently it returns success. Fixes: 13159183ec7a ("qlcnic: 83xx base driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/X9nHbMqEyI/xPfGd@mwanda Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-17ext4: simplify ext4 error translationJan Kara
We convert errno's to ext4 on-disk format error codes in save_error_info(). Add a function and a bit of macro magic to make this simpler. Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20201127113405.26867-7-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-12-17ext4: move functions in super.cJan Kara
Just move error info related functions in super.c close to ext4_handle_error(). We'll want to combine save_error_info() with ext4_handle_error() and this makes change more obvious and saves a forward declaration as well. No functional change. Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20201127113405.26867-6-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-12-17ext4: make ext4_abort() use __ext4_error()Jan Kara
The only difference between __ext4_abort() and __ext4_error() is that the former one ignores errors=continue mount option. Unify the code to reduce duplication. Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20201127113405.26867-5-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-12-17ext4: standardize error message in ext4_protect_reserved_inode()Jan Kara
We use __ext4_error() when ext4_protect_reserved_inode() finds filesystem corruption. However EXT4_ERROR_INODE_ERR() is perfectly capable of reporting all the needed information. So just use that. Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20201127113405.26867-4-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-12-17ext4: remove redundant sb checksum recomputationJan Kara
Superblock is written out either through ext4_commit_super() or through ext4_handle_dirty_super(). In both cases we recompute the checksum so it is not necessary to recompute it after updating superblock free inodes & blocks counters. Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20201127113405.26867-3-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-12-17ext4: don't remount read-only with errors=continue on rebootJan Kara
ext4_handle_error() with errors=continue mount option can accidentally remount the filesystem read-only when the system is rebooting. Fix that. Fixes: 1dc1097ff60e ("ext4: avoid panic during forced reboot") Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Cc: stable@kernel.org Link: https://lore.kernel.org/r/20201127113405.26867-2-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-12-17ext4: fix deadlock with fs freezing and EA inodesJan Kara
Xattr code using inodes with large xattr data can end up dropping last inode reference (and thus deleting the inode) from places like ext4_xattr_set_entry(). That function is called with transaction started and so ext4_evict_inode() can deadlock against fs freezing like: CPU1 CPU2 removexattr() freeze_super() vfs_removexattr() ext4_xattr_set() handle = ext4_journal_start() ... ext4_xattr_set_entry() iput(old_ea_inode) ext4_evict_inode(old_ea_inode) sb->s_writers.frozen = SB_FREEZE_FS; sb_wait_write(sb, SB_FREEZE_FS); ext4_freeze() jbd2_journal_lock_updates() -> blocks waiting for all handles to stop sb_start_intwrite() -> blocks as sb is already in SB_FREEZE_FS state Generally it is advisable to delete inodes from a separate transaction as it can consume quite some credits however in this case it would be quite clumsy and furthermore the credits for inode deletion are quite limited and already accounted for. So just tweak ext4_evict_inode() to avoid freeze protection if we have transaction already started and thus it is not really needed anyway. Cc: stable@vger.kernel.org Fixes: dec214d00e0d ("ext4: xattr inode deduplication") Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20201127110649.24730-1-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-12-17jbd2: add a helper to find out number of fast commit blocksHarshad Shirwadkar
Add a helper to read number of fast commit blocks from jbd2 superblock and also rename the JBD2_MIN_FC_BLKS to JBD2_DEFAULT_FAST_COMMIT_BLOCKS since this constant is just the default number of fast commit blocks to use in case number of fast commit blocks isn't set in jbd2 superblock. Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201120202232.2240293-2-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-12-17ext4: make fast_commit.h byte identical with e2fsprogs/fast_commit.hHarshad Shirwadkar
This patch makes fast_commit.h byte by byte identical with e2fsprogs/fast_commit.h. This will help us ensure that there are no on-disk format inconsistencies between e2fsck and kernel ext4. Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201120202232.2240293-1-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-12-17ext4: fix fall-through warnings for ClangGustavo A. R. Silva
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of just letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/03497331f088a938d7a728e7a689bd7953139429.1605896059.git.gustavoars@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-12-17ext4: add docs about fast commit idempotenceHarshad Shirwadkar
Fast commit on-disk format is designed such that the replay of these tags can be idempotent. This patch adds documentation in the code in form of comments and in form kernel docs that describes these characteristics. This patch also adds a TODO item needed to ensure kernel fast commit replay idempotence. Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201119232822.1860882-1-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-12-17ext4: remove the unused EXT4_CURRENT_REV macroKaixu Xia
There are no callers of the EXT4_CURRENT_REV macro, so remove it. Signed-off-by: Kaixu Xia <kaixuxia@tencent.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/1605164202-31120-1-git-send-email-kaixuxia@tencent.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-12-17ext4: fix an IS_ERR() vs NULL checkDan Carpenter
The ext4_find_extent() function never returns NULL, it returns error pointers. Fixes: 44059e503b03 ("ext4: fast commit recovery path") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20201023112232.GB282278@mwanda Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
2020-12-17ext4: check for invalid block size early when mounting a file systemTheodore Ts'o
Check for valid block size directly by validating s_log_block_size; we were doing this in two places. First, by calculating blocksize via BLOCK_SIZE << s_log_block_size, and then checking that the blocksize was valid. And then secondly, by checking s_log_block_size directly. The first check is not reliable, and can trigger an UBSAN warning if s_log_block_size on a maliciously corrupted superblock is greater than 22. This is harmless, since the second test will correctly reject the maliciously fuzzed file system, but to make syzbot shut up, and because the two checks are duplicative in any case, delete the blocksize check, and move the s_log_block_size earlier in ext4_fill_super(). Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reported-by: syzbot+345b75652b1d24227443@syzkaller.appspotmail.com
2020-12-17ext4: fix a memory leak of ext4_free_dataChunguang Xu
When freeing metadata, we will create an ext4_free_data and insert it into the pending free list. After the current transaction is committed, the object will be freed. ext4_mb_free_metadata() will check whether the area to be freed overlaps with the pending free list. If true, return directly. At this time, ext4_free_data is leaked. Fortunately, the probability of this problem is small, since it only occurs if the file system is corrupted such that a block is claimed by more one inode and those inodes are deleted within a single jbd2 transaction. Signed-off-by: Chunguang Xu <brookxu@tencent.com> Link: https://lore.kernel.org/r/1604764698-4269-8-git-send-email-brookxu@tencent.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
2020-12-17Merge branch 'mptcp-a-bunch-of-assorted-fixes'Jakub Kicinski
Paolo Abeni says: ==================== mptcp: a bunch of assorted fixes This series pulls a few fixes for the MPTCP datapath. Most issues addressed here has been recently introduced with the recent reworks, with the notable exception of the first patch, which addresses an issue present since the early days ==================== Link: https://lore.kernel.org/r/cover.1608114076.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-17mptcp: fix pending data accountingPaolo Abeni
When sendmsg() needs to wait for memory, the pending data is not updated. That causes a drift in forward memory allocation, leading to stall and/or warnings at socket close time. This change addresses the above issue moving the pending data counter update inside the sendmsg() main loop. Fixes: 6e628cd3a8f7 ("mptcp: use mptcp release_cb for delayed tasks") Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-17mptcp: push pending frames when subflow has free spacePaolo Abeni
When multiple subflows are active, we can receive a window update on subflow with no write space available. MPTCP will try to push frames on such subflow and will fail. Pending frames will be pushed only after receiving a window update on a subflow with some wspace available. Overall the above could lead to suboptimal aggregate bandwidth usage. Instead, we should try to push pending frames as soon as the subflow reaches both conditions mentioned above. We can finally enable self-tests with asymmetric links, as the above makes them finally pass. Fixes: 6f8a612a33e4 ("mptcp: keep track of advertised windows right edge") Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-17mptcp: properly annotate nested lockPaolo Abeni
MPTCP closes the subflows while holding the msk-level lock. While acquiring the subflow socket lock we need to use the correct nested annotation, or we can hit a lockdep splat at runtime. Reported-and-tested-by: Geliang Tang <geliangtang@gmail.com> Fixes: e16163b6e2b7 ("mptcp: refactor shutdown and close") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-17mptcp: fix security context on server socketPaolo Abeni
Currently MPTCP is not propagating the security context from the ingress request socket to newly created msk at clone time. Address the issue invoking the missing security helper. Fixes: cf7da0d66cc1 ("mptcp: Create SUBFLOW socket for incoming connections") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-17net/mlx5: Fix compilation warning for 32-bit platformParav Pandit
MLX5_GENERAL_OBJECT_TYPES types bitfield is 64-bit field. Defining an enum for such bit fields on 32-bit platform results in below warning. ./include/vdso/bits.h:7:26: warning: left shift count >= width of type [-Wshift-count-overflow] ^ ./include/linux/mlx5/mlx5_ifc.h:10716:46: note: in expansion of macro ‘BIT’ MLX5_HCA_CAP_GENERAL_OBJECT_TYPES_SAMPLER = BIT(0x20), ^~~ Use 32-bit friendly BIT_ULL macro. Fixes: 2a2970891647 ("net/mlx5: Add sample offload hardware bits and structures") Signed-off-by: Parav Pandit <parav@nvidia.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20201213120641.216032-1-leon@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-17tools headers UAPI: Sync linux/stat.h with the kernel sourcesArnaldo Carvalho de Melo
To pick the changes in: 72d1249e2ffdbc34 ("uapi: fix statx attribute value overlap for DAX & MOUNT_ROOT") That don't cause any change in tooling, just addresses this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/stat.h' differs from latest version at 'include/uapi/linux/stat.h' diff -u tools/include/uapi/linux/stat.h include/uapi/linux/stat.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Eric Sandeen <sandeen@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-12-17tools headers: Syncronize linux/build_bug.h with the kernel sourcesArnaldo Carvalho de Melo
To pick up the changes in: 14dc3983b5dff513 ("kbuild: avoid static_assert for genksyms") And silence this perf build warning: Warning: Kernel ABI header at 'tools/include/linux/build_bug.h' differs from latest version at 'include/linux/build_bug.h' diff -u tools/include/linux/build_bug.h include/linux/build_bug.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-12-17Merge remote-tracking branch 'torvalds/master' into perf/coreArnaldo Carvalho de Melo
To pick up fixes and check what UAPI headers need to be synched. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-12-17perf tools: Reformat record's control fd man textJiri Olsa
Adding available control commands in separate paragraph, so it's more readable and easier to add new commands. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Budankov <abudankov@huawei.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20201216083914.47215-2-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-12-17perf config: Fix example command in manpage to conform to syntax specified ↵Nick Thompson
in the SYNOPSIS section. Committer testing: With the previously documented example: $ perf config --user report sort-order=srcline The config variable does not contain a section name: report $ With the fixed example line: $ perf config --user report.sort-order=srcline $ perf config --user report.sort-order report.sort-order=srcline $ Signed-off-by: Nick Thompson <nathompson7@protonmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/linux-perf-users/20201217142619.GA14524@redhat.com/ Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-12-17perf test: Make sample-parsing test aware of PERF_SAMPLE_{CODE,DATA}_PAGE_SIZEArnaldo Carvalho de Melo
To fix this: $ perf test -v 27 27: Sample parsing : --- start --- test child forked, pid 586013 sample format has changed, some new PERF_SAMPLE_ bit was introduced - test needs updating test child finished with -1 ---- end ---- Sample parsing: FAILED! $ This patchset is still not completely merged, so when adding the PERF_SAMPLE_CODE_PAGE_SIZE to 'struct perf_sample' we need to add the bits added in this patch for 'perf_sample.data_page_size'. Fixes: 251cc77b8176de37 ("tools headers UAPI: Update tools's copy of linux/perf_event.h") Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-12-17perf tools: Add support to read build id from compressed elfJiri Olsa
Adding support to decompress file before reading build id. Adding filename__read_build_id and change its current versions to read_build_id. Shutting down stderr output of perf list in the shell test: 82: Check open filename arg using perf trace + vfs_getname : Ok because with decompression code in the place we the filename__read_build_id function is more verbose in case of error and the test did not account for that. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Budankov <abudankov@huawei.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20201214105457.543111-7-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-12-17perf debug: Add debug_set_file functionJiri Olsa
Allow to set debug output file via new debug_set_file function. It's called during perf startup in perf_debug_setup to set stderr file as default and any perf command can set it later to different file. It will be used in perf daemon command to get verbose output into log file. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Budankov <abudankov@huawei.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20201212104358.412065-2-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-12-17perf tools: Add evlist__disable_evsel/evlist__enable_evselJiri Olsa
Adding interface to enable/disable single event in the evlist based on its name. It will be used later in new control enable/disable interface. Keeping the evlist::enabled true when one or more events are enabled so the toggle can work properly and toggle evlist to disabled state. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Alexei Budankov <abudankov@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20201210204330.233864-2-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-12-17perf evlist: Support pipe mode displayNamhyung Kim
Likewise, perf evlist command should print event attributes by reading PERF_RECORD_HEADER_ATTR records. Before: $ perf record -o- true | ./perf evlist -i- (prints nothing) After: $ perf record -o- true | ./perf evlist -i- cycles:pppH Committer testing: Verbose mode also works as expected: $ perf record -o- true | perf evlist -i- cycles:uhH $ perf record -o- true | perf evlist -vi- cycles:uhH: size: 120, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|PERIOD, read_format: ID, disabled: 1, inherit: 1, exclude_kernel: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1 $ Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20201210061302.88213-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-12-17perf report: Support --header-only for pipe modeNamhyung Kim
The --header-only checks file header and prints the feature data. But as pipe mode doesn't have it in the header it prints almost nothing. Change it to process first few records until it founds HEADER_FEATURE. Before: $ perf record -o- true | perf report -i- --header-only # ======== # captured on : Thu Dec 10 14:34:59 2020 # header version : 1 # data offset : 0 # data size : 0 # feat offset : 0 # ======== # After: $ perf record -o- true | perf report -i- --header-only # ======== # captured on : Thu Dec 10 14:49:11 2020 # header version : 1 # data offset : 0 # data size : 0 # feat offset : 0 # ======== # # hostname : balhae # os release : 5.7.17-1xxx # perf version : 5.10.rc6.gdb0ea13cc741 # arch : x86_64 # nrcpus online : 8 # nrcpus avail : 8 # cpudesc : Intel(R) Core(TM) i7-8665U CPU @ 1.90GHz # cpuid : GenuineIntel,6,142,12 # total memory : 16158916 kB # cmdline : perf record -o- true # event : name = cycles, , id = { 81, 82, 83, 84, 85, 86, 87, 88 }, size = 120, ... # CPU_TOPOLOGY info available, use -I to display # NUMA_TOPOLOGY info available, use -I to display # pmu mappings: intel_pt = 9, intel_bts = 8, software = 1, power = 20, uprobe = 7, ... # time of first sample : 0.000000 # time of last sample : 0.000000 # sample duration : 0.000 ms # MEM_TOPOLOGY info available, use -I to display # cpu pmu capabilities: branches=32, max_precise=3, pmu_name=skylake Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20201210061302.88213-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit (git 2.34.1) at 2025-07-18 22:35:42 +0000