summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-05-05drm/amd/display: [FW Promotion] Release 0.1.8.0Taimur Hassan
Undefined unnecessary definition to avoid wrong referring Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-05drm/amd/display: disable DPP RCG before DPP CLK enableCharlene Liu
[why] DPP CLK enable needs to disable DPPCLK RCG first. The DPPCLK_en in dccg should always be enabled when the corresponding pipe is enabled. Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-05drm/amd/display: more liberal vmin/vmax update for freesyncAurabindo Pillai
[Why] FAMS2 expects vmin/vmax to be updated in the case when freesync is off, but supported. But we only update it when freesync is enabled. [How] Change the vsync handler such that dc_stream_adjust_vmin_vmax() its called irrespective of whether freesync is enabled. If freesync is supported, then there is no harm in updating vmin/vmax registers. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3546 Reviewed-by: ChiaHsuan Chung <chiahsuan.chung@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-05drm/amd/display: allow dscclk disableCharlene Liu
[why] when dscclk rcg disabled from usr reg option, dsc clock will remain enabled because driver was doing two things both dscclk and dsc rcg in the same routine. Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-05Revert "drm/amd/display: Refactor SubVP cursor limiting logic"Ryan Seto
This reverts commit 19e743f0fb73 ("drm/amd/display: Refactor SubVP cursor limiting logic") Reason for revert: Corruption Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Ryan Seto <ryanseto@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-05drm/amd/display: Prepare for Fused I2C-over-AUXDominik Kaszewski
[Why] Passive DP-HDMI dongles use I2C-over-AUX protocol which is currently not supported using HDCP Locality Check FW path. [How] Prepare code for switching to I2C-over-AUX protocol. Passive dongle detection to be added in another commit. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dominik Kaszewski <dominik.kaszewski@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-05drm/amd/display: Fix invalid context error in dml helperRoman Li
[Why] "BUG: sleeping function called from invalid context" error. after: "drm/amd/display: Protect FPU in dml2_validate()/dml21_validate()" The populate_dml_plane_cfg_from_plane_state() uses the GFP_KERNEL flag for memory allocation, which shouldn't be used in atomic contexts. The allocation is needed only for using another helper function get_scaler_data_for_plane(). [How] Modify helpers to pass a pointer to scaler_data within existing context, eliminating the need for dynamic memory allocation/deallocation and copying. Fixes: 366e77cd4923 ("drm/amd/display: Protect FPU in dml2_validate()/dml21_validate()") Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-05drm/amd/display: Remove redundant null checkAlex Hung
[WHY & HOW] The null check for connector was dereferenced previously in the same function and the caller. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-05drm/amd/display: Always Scale FlagJesse Agate
[Why & How] When always scale flag is set at the API level, the number of taps should not be overridden to zero in the identity scaling ratio case, and luma scale should not be set to bypass regardless of luma scale ratio Reviewed-by: Samson Tam <samson.tam@amd.com> Signed-off-by: Jesse Agate <jesse.agate@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-05drm/amd/display: Promote DC to 3.2.330Taimur Hassan
Summary * Update IPS checks to properly include all ASICs. * Refactoring DSC enum dsc_bits_per_comp * Fix ACPI edid parsing issue * Update AUX read interval for LTTPR with old sinks * Correct prefetch calculation Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-05drm/amd/display: Refactoring DSC enum dsc_bits_per_comp.Bhuvanachandra Pinninti
[Why] Previously the 'dsc_bits_per_comp' enumeration was defined in individual .c files, making it unavailable for other files that may need it. [How] The 'dsc_bits_per_comp' enumeration has been relocated to a common header file. Reviewed-by: Mounika Adhuri <Mounika.Adhuri@amd.com> Reviewed-by: Martin Leung <martin.leung@amd.com> Signed-off-by: Bhuvanachandra Pinninti <bpinnint@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-05drm/amd/display: Update IPS sequential_ono requirement checksOvidiu Bunea
[why & how] ASICs that require special RCG/PG programming are determined based on hw_internal_rev. Update these checks to properly include all such ASICs. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-05drm/bridge: anx7625: change the gpiod_set_value APIAyushi Makhija
Use gpiod_set_value_cansleep() instead of gpiod_set_value() to fix the below call trace in the boot log: [ 5.690534] Call trace: [ 5.690536] gpiod_set_value+0x40/0xa4 [ 5.690540] anx7625_runtime_pm_resume+0xa0/0x324 [anx7625] [ 5.690545] __rpm_callback+0x48/0x1d8 [ 5.690549] rpm_callback+0x6c/0x78 Certain GPIO controllers require access via message-based buses such as I2C or SPI, which may cause the GPIOs to enter a sleep state. Therefore, use the gpiod_set_value_cansleep(). Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20250505094245.2660750-7-quic_amakhija@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-05drm/bridge: anx7625: fix anx7625_sink_detect() to return correct hpd statusAyushi Makhija
In the anx7625_sink_detect(), the device is checked to see if it is a panel bridge, and it always sends a "connected" status to the connector. When adding the DP port on port 1 of the anx7625, it incorrectly treats it as a panel bridge and sends an always "connected" status. Instead of checking the status on the panel bridge, it's better to check the hpd_status for connectors that supports hot-plugging. This way, it verifies the hpd_status variable before sending the status to the connector. In case of eDP, anx7625_bridge_detect() will not get called because the bridge->ops condition in anx7625_link_bridge() will not be satisfied. Since anx7625_sink_detect() is called from anx7625_bridge_detect(), this results in the sink_detect logic not being executed for eDP. Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250505094245.2660750-6-quic_amakhija@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-05drm/bridge: anx7625: fix drm_bridge ops flags to support hot-pluggingAyushi Makhija
The anx7625_link_bridge() checks if a device is not a panel bridge and add DRM_BRIDGE_OP_HPD and DRM_BRIDGE_OP_DETECT flags to the drm_bridge->ops. However, on port 1 of the anx7625 bridge, any device added is always treated as a panel bridge, preventing connector_detect() from being called. To resolve this, instead of just checking if it is a panel bridge, verify the type of device based on aux whether it is a DisplayPort or eDP panel. If the device is not of the eDP type, add DRM_BRIDGE_OP_HPD and DRM_BRIDGE_OP_DETECT flags to the to the drm_bridge->ops. Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250505094245.2660750-5-quic_amakhija@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-05drm/bridge: anx7625: enable HPD interruptsAyushi Makhija
When the device enters the suspend state, it prevents HPD interrupts from occurring. To address this, implement .hpd_enable() and .hpd_disable() callbacks functions of the drm_bridge. Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250505094245.2660750-4-quic_amakhija@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-05drm/i915/display: implement wa_14022269668Vinod Govindapillai
As per the WA, fbc stride need to be programmed always for bmg. Display driver handles the need to program the fbc stride using the override stride. So ensure that we always get the override stride in case of bmg v2: re-phrase the commit message. Bspec: 74212 Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com> Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Link: https://lore.kernel.org/r/20250428115554.116780-1-vinod.govindapillai@intel.com
2025-05-05drivers: gpu: drm: panel: Add BOE TD4320Barnabás Czémán
Add driver for BOE TD4320 DSI panel, used in Xiaomi Redmi Note 7 mobile phone. Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250430-lavender-panel-v3-2-7625e62d62b2@mainlining.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250430-lavender-panel-v3-2-7625e62d62b2@mainlining.org
2025-05-05dt-bindings: display: panel: Add BOE TD4320Barnabás Czémán
Document BOE TD4320 6.3" 2340x1080 panel found in Xiaomi Redmi Note 7 smartphone. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org> Link: https://lore.kernel.org/r/20250430-lavender-panel-v3-1-7625e62d62b2@mainlining.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250430-lavender-panel-v3-1-7625e62d62b2@mainlining.org
2025-05-04Linux 6.15-rc5v6.15-rc5Linus Torvalds
2025-05-04Merge tag 'perf-tools-fixes-for-v6.15-2025-05-04' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tools fixes from Namhyung Kim: "Just a couple of build fixes on arm64" * tag 'perf-tools-fixes-for-v6.15-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: perf tools: Fix in-source libperf build perf tools: Fix arm64 build by generating unistd_64.h
2025-05-04Merge tag 'trace-v6.15-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fixes from Steven Rostedt: - Fix read out of bounds bug in tracing_splice_read_pipe() The size of the sub page being read can now be greater than a page. But the buffer used in tracing_splice_read_pipe() only allocates a page size. The data copied to the buffer is the amount in sub buffer which can overflow the buffer. Use min((size_t)trace_seq_used(&iter->seq), PAGE_SIZE) to limit the amount copied to the buffer to a max of PAGE_SIZE. - Fix the test for NULL from "!filter_hash" to "!*filter_hash" The add_next_hash() function checked for NULL at the wrong pointer level. - Do not use the array in trace_adjust_address() if there are no elements The trace_adjust_address() finds the offset of a module that was stored in the persistent buffer when reading the previous boot buffer to see if the address belongs to a module that was loaded in the previous boot. An array is created that matches currently loaded modules with previously loaded modules. The trace_adjust_address() uses that array to find the new offset of the address that's in the previous buffer. But if no module was loaded, it ends up reading the last element in an array that was never allocated. Check if nr_entries is zero and exit out early if it is. - Remove nested lock of trace_event_sem in print_event_fields() The print_event_fields() function iterates over the ftrace_events list and requires the trace_event_sem semaphore held for read. But this function is always called with that semaphore held for read. Remove the taking of the semaphore and replace it with lockdep_assert_held_read(&trace_event_sem) * tag 'trace-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: Do not take trace_event_sem in print_event_fields() tracing: Fix trace_adjust_address() when there is no modules in scratch area ftrace: Fix NULL memory allocation check tracing: Fix oob write in trace_seq_to_buffer()
2025-05-04Merge tag 'parisc-for-6.15-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fix from Helge Deller: "Fix a double SIGFPE crash" * tag 'parisc-for-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix double SIGFPE crash
2025-05-04parisc: Fix double SIGFPE crashHelge Deller
Camm noticed that on parisc a SIGFPE exception will crash an application with a second SIGFPE in the signal handler. Dave analyzed it, and it happens because glibc uses a double-word floating-point store to atomically update function descriptors. As a result of lazy binding, we hit a floating-point store in fpe_func almost immediately. When the T bit is set, an assist exception trap occurs when when the co-processor encounters *any* floating-point instruction except for a double store of register %fr0. The latter cancels all pending traps. Let's fix this by clearing the Trap (T) bit in the FP status register before returning to the signal handler in userspace. The issue can be reproduced with this test program: root@parisc:~# cat fpe.c static void fpe_func(int sig, siginfo_t *i, void *v) { sigset_t set; sigemptyset(&set); sigaddset(&set, SIGFPE); sigprocmask(SIG_UNBLOCK, &set, NULL); printf("GOT signal %d with si_code %ld\n", sig, i->si_code); } int main() { struct sigaction action = { .sa_sigaction = fpe_func, .sa_flags = SA_RESTART|SA_SIGINFO }; sigaction(SIGFPE, &action, 0); feenableexcept(FE_OVERFLOW); return printf("%lf\n",1.7976931348623158E308*1.7976931348623158E308); } root@parisc:~# gcc fpe.c -lm root@parisc:~# ./a.out Floating point exception root@parisc:~# strace -f ./a.out execve("./a.out", ["./a.out"], 0xf9ac7034 /* 20 vars */) = 0 getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM_INFINITY}) = 0 ... rt_sigaction(SIGFPE, {sa_handler=0x1110a, sa_mask=[], sa_flags=SA_RESTART|SA_SIGINFO}, NULL, 8) = 0 --- SIGFPE {si_signo=SIGFPE, si_code=FPE_FLTOVF, si_addr=0x1078f} --- --- SIGFPE {si_signo=SIGFPE, si_code=FPE_FLTOVF, si_addr=0xf8f21237} --- +++ killed by SIGFPE +++ Floating point exception Signed-off-by: Helge Deller <deller@gmx.de> Suggested-by: John David Anglin <dave.anglin@bell.net> Reported-by: Camm Maguire <camm@maguirefamily.org> Cc: stable@vger.kernel.org
2025-05-04Merge tag 'edac_urgent_for_v6.15_rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC fixes from Borislav Petkov: - Test the correct structure member when handling correctable errors and avoid spurious interrupts, in altera_edac * tag 'edac_urgent_for_v6.15_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/altera: Set DDR and SDMMC interrupt mask before registration EDAC/altera: Test the correct error reg offset
2025-05-04Merge tag 'x86-urgent-2025-05-04' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Ingo Molnar: "Fix SEV-SNP memory acceptance from the EFI stub for guests running at VMPL >0" * tag 'x86-urgent-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot/sev: Support memory acceptance in the EFI stub under SVSM
2025-05-04Merge tag 'perf-urgent-2025-05-04' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc perf fixes from Ingo Molnar: - Require group events for branch counter groups and PEBS counter snapshotting groups to be x86 events. - Fix the handling of counter-snapshotting of non-precise events, where counter values may move backwards a bit, temporarily, confusing the code. - Restrict perf/KVM PEBS to guest-owned events. * tag 'perf-urgent-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: KVM: Mask PEBS_ENABLE loaded for guest with vCPU's value. perf/x86/intel/ds: Fix counter backwards of non-precise events counters-snapshotting perf/x86/intel: Check the X86 leader for pebs_counter_event_group perf/x86/intel: Only check the group flag for X86 leader
2025-05-04Merge tag 'irq-urgent-2025-05-04' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Ingo Molnar: - Prevent NULL pointer dereference in msi_domain_debug_show() - Fix crash in the qcom-mpm irqchip driver when configuring interrupts for non-wake GPIOs * tag 'irq-urgent-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/qcom-mpm: Prevent crash when trying to handle non-wake GPIOs genirq/msi: Prevent NULL pointer dereference in msi_domain_debug_show()
2025-05-04drm/rockchip: inno-hdmi: Fix video timing HSYNC/VSYNC polarity setting for ↵Andy Yan
rk3036 The HSYNC/VSYNC polarity of rk3036 HDMI are controlled by GRF. Without the polarity configuration in GRF, it can be observed from the HDMI protocol analyzer that the H/V front/back timing output by RK3036 HDMI are currently not in line with the specifications. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3036-kylin Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20250422070455.432666-5-andyshrk@163.com
2025-05-04drm/rockchip: inno-hdmi: Simplify error handler with dev_err_probeAndy Yan
Use dev_err_probe simplify the error handle. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3036-kylin Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20250422070455.432666-4-andyshrk@163.com
2025-05-04dt-bindings: display: rockchip,inno-hdmi: Document GRF for RK3036 HDMIAndy Yan
HDMI on RK3036 use GRF control the HSYNC/VSYNC polarity, but this part is missing when it first landing upstream. Document that it is mandatory for RK3036 HDMI. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20250422070455.432666-3-andyshrk@163.com
2025-05-04dt-bindings: display: rockchip,inno-hdmi: Fix Document of RK3036 compatibleAndy Yan
The RK3036 HDMI DDC bus requires it's PHY's reference clock to be enabled first before normal DDC communication can be carried out. Therefore, both RK3036 and RK3128 HDMI require two identical clocks. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20250422070455.432666-2-andyshrk@163.com
2025-05-04drm/rockchip: rk3066_hdmi: switch to drm bridgeAndy Yan
Convert it to drm bridge driver, it will be convenient for us to migrate the connector part to the display driver later. Note: I don't have the hardware to test this driver, so for now I can only do the compilation test. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3066-marsboard Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20250428102309.1501986-1-andyshrk@163.com
2025-05-04x86/boot/sev: Support memory acceptance in the EFI stub under SVSMArd Biesheuvel
Commit: d54d610243a4 ("x86/boot/sev: Avoid shared GHCB page for early memory acceptance") provided a fix for SEV-SNP memory acceptance from the EFI stub when running at VMPL #0. However, that fix was insufficient for SVSM SEV-SNP guests running at VMPL >0, as those rely on a SVSM calling area, which is a shared buffer whose address is programmed into a SEV-SNP MSR, and the SEV init code that sets up this calling area executes much later during the boot. Given that booting via the EFI stub at VMPL >0 implies that the firmware has configured this calling area already, reuse it for performing memory acceptance in the EFI stub. Fixes: fcd042e86422 ("x86/sev: Perform PVALIDATE using the SVSM when not at VMPL0") Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Co-developed-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: <stable@vger.kernel.org> Cc: Dionna Amalie Glaze <dionnaglaze@google.com> Cc: Kevin Loughlin <kevinloughlin@google.com> Cc: linux-efi@vger.kernel.org Link: https://lore.kernel.org/r/20250428174322.2780170-2-ardb+git@google.com
2025-05-03Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fix from Catalin Marinas: "Add missing sentinels to the arm64 Spectre-BHB MIDR arrays, otherwise is_midr_in_range_list() reads beyond the end of these arrays" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: errata: Add missing sentinels to Spectre-BHB MIDR arrays
2025-05-03Merge tag 'i2c-for-6.15-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fix from Wolfram Sang: - imx-lpi2c: fix clock error handling sequence in probe * tag 'i2c-for-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: imx-lpi2c: Fix clock count when probe defers
2025-05-03Merge tag 'sound-6.15-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A bunch of small fixes. Mostly driver specific. - An OOB access fix in core UMP rawmidi conversion code - Fix for ASoC DAPM hw_params widget sequence - Make retry of usb_set_interface() errors for flaky devices - Fix redundant USB MIDI name strings - Quirks for various HP and ASUS models with HD-audio, and Jabra Evolve 65 USB-audio - Cirrus Kunit test fixes - Various fixes for ASoC Intel, stm32, renesas, imx-card, and simple-card" * tag 'sound-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits) ASoC: amd: ps: fix for irq handler return status ASoC: simple-card-utils: Fix pointer check in graph_util_parse_link_direction ASoC: intel/sdw_utils: Add volume limit to cs35l56 speakers ASoC: intel/sdw_utils: Add volume limit to cs42l43 speakers ASoC: stm32: sai: add a check on minimal kernel frequency ASoC: stm32: sai: skip useless iterations on kernel rate loop ALSA: hda/realtek - Add more HP laptops which need mute led fixup ALSA: hda/realtek: Fix built-mic regression on other ASUS models ASoC: Intel: catpt: avoid type mismatch in dev_dbg() format ALSA: usb-audio: Fix duplicated name in MIDI substream names ALSA: ump: Fix buffer overflow at UMP SysEx message conversion ALSA: usb-audio: Add second USB ID for Jabra Evolve 65 headset ALSA: hda/realtek: Add quirk for HP Spectre x360 15-df1xxx ALSA: hda: Apply volume control on speaker+lineout for HP EliteStudio AIO ASoC: Intel: bytcr_rt5640: Add DMI quirk for Acer Aspire SW3-013 ASoC: amd: acp: Fix devm_snd_soc_register_card(acp-pdm-mach) failure ASoC: amd: acp: Fix NULL pointer deref in acp_i2s_set_tdm_slot ASoC: amd: acp: Fix NULL pointer deref on acp resume path ASoC: renesas: rz-ssi: Use NOIRQ_SYSTEM_SLEEP_PM_OPS() ASoC: soc-acpi-intel-ptl-match: add empty item to ptl_cs42l43_l3[] ...
2025-05-03dt-bindings: display: ltk500hd1829: add port propertyHeiko Stuebner
The panel can be connected to via graph nodes, so allow the port property. Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20250430082850.244199-3-heiko@sntech.de Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-03dt-bindings: display: ltk050h3146w: add port propertyHeiko Stuebner
The panel can be connected to via graph nodes, so allow the port property. This fixes dtc checker warnings like: >> arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou-haikou-video-demo.dtb: panel@0 (leadtek,ltk050h3148w): 'port' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/display/panel/leadtek,ltk050h3146w.yaml# arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou-haikou-video-demo.dtb: /edp@fdec0000: failed to match any schema with compatible: ['rockchip,rk3588-edp'] Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202504300218.VDqQqGTT-lkp@intel.com/ Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20250430082850.244199-2-heiko@sntech.de Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-02Merge tag 'spi-fix-v6.15-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A fairly small pile of fixes, plus one new compatible string addition to the Synopsis driver for a new platform. The most notable thing is the fix for divide by zeros in spi-mem if an operation has no dummy bytes" * tag 'spi-fix-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: tegra114: Don't fail set_cs_timing when delays are zero spi: spi-qpic-snand: fix NAND_READ_LOCATION_2 register handling spi: spi-mem: Add fix to avoid divide error spi: dt-bindings: snps,dw-apb-ssi: Add compatible for SOPHGO SG2042 SoC spi: dt-bindings: snps,dw-apb-ssi: Merge duplicate compatible entry spi: spi-qpic-snand: propagate errors from qcom_spi_block_erase() spi: stm32-ospi: Fix an error handling path in stm32_ospi_probe()
2025-05-03drm/i915/de: drop drm_i915_private compat wrappers from intel_de_*()Jani Nikula
All the users of intel_de_*() functions now pass in struct intel_display, and we can remove the __to_intel_display() _Generic() compat wrappers. Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Link: https://lore.kernel.org/r/3aac42eab7b03c791afee940d0a647770afc99c5.1746175756.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-05-03drm/i915/hdmi: convert rest of intel_hdmi.c to struct intel_displayJani Nikula
Remove the last uses of struct drm_i915_private from intel_hdmi.c, and drop the dependency on i915_drv.h. v2: Rebase Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Link: https://lore.kernel.org/r/24183605ac919ca115b1b25fa386643409814c82.1746175756.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-05-03drm/i915/dpt: convert intel_dpt_common.c to struct intel_displayJani Nikula
Remove the last uses of struct drm_i915_private from intel_dpt_common.c, and drop the dependency on i915_drv.h. Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Link: https://lore.kernel.org/r/7bc340e05c535479b0f0698372835ba04fd5c8f8.1746175756.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-05-02drm/gpusvm: remove unused pages pointerDafna Hirschfeld
The pages pointer is not used, remove it. Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://lore.kernel.org/r/20250422095943.1198393-1-dafna.hirschfeld@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-05-02Merge tag 'pm-6.15-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix three recent regressions, two in cpufreq and one in the Intel Soundwire driver, and an unchecked MSR access in the intel_pstate driver: - Fix a recent regression causing systems where frequency tables are used by cpufreq to have issues with setting frequency limits (Rafael Wysocki) - Fix a recent regressions causing frequency boost settings to become out-of-sync if platform firmware updates the registers associated with frequency boost during system resume (Viresh Kumar) - Fix a recent regression causing resume failures to occur in the Intel Soundwire driver if the device handled by it is in runtime suspend before a system-wide suspend (Rafael Wysocki) - Fix an unchecked MSR aceess in the intel_pstate driver occurring when CPUID indicates no turbo, but the driver attempts to enable turbo frequencies due to a misleading value read from an MSR (Srinivas Pandruvada)" * tag 'pm-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: intel_pstate: Unchecked MSR aceess in legacy mode soundwire: intel_auxdevice: Fix system suspend/resume handling cpufreq: Fix setting policy limits when frequency tables are used cpufreq: ACPI: Re-sync CPU boost state on system resume
2025-05-02Merge tag '6.15-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull smb client fixes from Steve French: - fix posix mkdir error to ksmbd (also avoids crash in cifs_destroy_request_bufs) - two smb1 fixes: fixing querypath info and setpathinfo to old servers - fix rsize/wsize when not multiple of page size to address DIO reads/writes * tag '6.15-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: smb: client: ensure aligned IO sizes cifs: Fix changing times and read-only attr over SMB1 smb_set_file_info() function cifs: Fix and improve cifs_query_path_info() and cifs_query_file_info() smb: client: fix zero length for mkdir POSIX create context
2025-05-02Merge tag 'drm-fixes-2025-05-03' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm fixes from Dave Airlie: "Weekly drm fixes, amdgpu and xe as usual, the new adp driver has a bunch of vblank fixes, then a bunch of small fixes across the board. Seems about the right level for this time in the release cycle. ttm: - docs warning fix kunit - fix leak in shmem tests fdinfo: - driver unbind race fix amdgpu: - Fix possible UAF in HDCP - XGMI dma-buf fix - NBIO 7.11 fix - VCN 5.0.1 fix xe: - EU stall locking fix and disabling on VF - Documentation fix kernel version supporting hwmon entries - SVM fixes on error handling i915: - Fix build for CONFIG_DRM_I915_PXP=n nouveau: - fix race condition in fence handling ivpu: - interrupt handling fix - D0i2 test mode fix adp: - vblank fixes mipi-dbi: - timing fix" * tag 'drm-fixes-2025-05-03' of https://gitlab.freedesktop.org/drm/kernel: (23 commits) drm/gpusvm: set has_dma_mapping inside mapping loop drm/xe/hwmon: Fix kernel version documentation for temperature drm/xe/eustall: Do not support EU stall on SRIOV VF drm/xe/eustall: Resolve a possible circular locking dependency drm/amdgpu: Add DPG pause for VCN v5.0.1 drm/amdgpu: Fix offset for HDP remap in nbio v7.11 drm/amdgpu: Fail DMABUF map of XGMI-accessible memory drm/amd/display: Fix slab-use-after-free in hdcp drm/mipi-dbi: Fix blanking for non-16 bit formats drm/tests: shmem: Fix memleak drm/xe/guc: Fix capture of steering registers drm/xe/svm: fix dereferencing error pointer in drm_gpusvm_range_alloc() drm: Select DRM_KMS_HELPER from DRM_DEBUG_DP_MST_TOPOLOGY_REFS drm: adp: Remove pointless irq_lock spin lock drm: adp: Enable vblank interrupts in crtc's .atomic_enable drm: adp: Handle drm_crtc_vblank_get() errors drm: adp: Use spin_lock_irqsave for drm device event_lock drm/fdinfo: Protect against driver unbind drm/ttm: fix the warning for hit_low and evict_low accel/ivpu: Fix the D0i2 disable test mode ...
2025-05-02Merge branch 'pm-cpufreq'Rafael J. Wysocki
Merge cpufreq fixes for 6.15-rc5: - Fix a recent regression causing systems where frequency tables are used by cpufreq to have issues with setting frequency limits (Rafael Wysocki). - Fix a recent regressions causing frequency boost settings to become out-of-sync if platform firmware updates the registers associated with them during system resume (Viresh Kumar). - Fix an unchecked MSR aceess in the intel_pstate driver occurring when CPUID indicates no turbo, but the driver attempts to enable turbo frequencies due to a misleading value read from an MSR (Srinivas Pandruvada). * pm-cpufreq: cpufreq: intel_pstate: Unchecked MSR aceess in legacy mode cpufreq: Fix setting policy limits when frequency tables are used cpufreq: ACPI: Re-sync CPU boost state on system resume
2025-05-02irqchip/qcom-mpm: Prevent crash when trying to handle non-wake GPIOsStephan Gerhold
On Qualcomm chipsets not all GPIOs are wakeup capable. Those GPIOs do not have a corresponding MPM pin and should not be handled inside the MPM driver. The IRQ domain hierarchy is always applied, so it's required to explicitly disconnect the hierarchy for those. The pinctrl-msm driver marks these with GPIO_NO_WAKE_IRQ. qcom-pdc has a check for this, but irq-qcom-mpm is currently missing the check. This is causing crashes when setting up interrupts for non-wake GPIOs: root@rb1:~# gpiomon -c gpiochip1 10 irq: IRQ159: trimming hierarchy from :soc@0:interrupt-controller@f200000-1 Unable to handle kernel paging request at virtual address ffff8000a1dc3820 Hardware name: Qualcomm Technologies, Inc. Robotics RB1 (DT) pc : mpm_set_type+0x80/0xcc lr : mpm_set_type+0x5c/0xcc Call trace: mpm_set_type+0x80/0xcc (P) qcom_mpm_set_type+0x64/0x158 irq_chip_set_type_parent+0x20/0x38 msm_gpio_irq_set_type+0x50/0x530 __irq_set_trigger+0x60/0x184 __setup_irq+0x304/0x6bc request_threaded_irq+0xc8/0x19c edge_detector_setup+0x260/0x364 linereq_create+0x420/0x5a8 gpio_ioctl+0x2d4/0x6c0 Fix this by copying the check for GPIO_NO_WAKE_IRQ from qcom-pdc.c, so that MPM is removed entirely from the hierarchy for non-wake GPIOs. Fixes: a6199bb514d8 ("irqchip: Add Qualcomm MPM controller driver") Reported-by: Alexey Klimov <alexey.klimov@linaro.org> Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Alexey Klimov <alexey.klimov@linaro.org> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20250502-irq-qcom-mpm-fix-no-wake-v1-1-8a1eafcd28d4@linaro.org
2025-05-02Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Two minor updates, both in drivers" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: core: Remove redundant query_complete trace scsi: myrb: Fix spelling mistake "statux" -> "status"
generated by cgit (git 2.34.1) at 2025-07-15 23:56:29 +0000