summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-05-01net: vertexcom: mse102x: Add range check for CMD_RTSStefan Wahren
Since there is no protection in the SPI protocol against electrical interferences, the driver shouldn't blindly trust the length payload of CMD_RTS. So introduce a bounds check for incoming frames. Fixes: 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250430133043.7722-4-wahrenst@gmx.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-01net: vertexcom: mse102x: Fix LEN_MASKStefan Wahren
The LEN_MASK for CMD_RTS doesn't cover the whole parameter mask. The Bit 11 is reserved, so adjust LEN_MASK accordingly. Fixes: 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250430133043.7722-3-wahrenst@gmx.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-01net: vertexcom: mse102x: Fix possible stuck of SPI interruptStefan Wahren
The MSE102x doesn't provide any SPI commands for interrupt handling. So in case the interrupt fired before the driver requests the IRQ, the interrupt will never fire again. In order to fix this always poll for pending packets after opening the interface. Fixes: 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250430133043.7722-2-wahrenst@gmx.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-01Merge branch 'there-are-some-bugfix-for-the-hns3-ethernet-driver'Jakub Kicinski
Jijie Shao says: ==================== There are some bugfix for the HNS3 ethernet driver ==================== Link: https://patch.msgid.link/20250430093052.2400464-1-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-01net: hns3: defer calling ptp_clock_register()Jian Shen
Currently the ptp_clock_register() is called before relative ptp resource ready. It may cause unexpected result when upper layer called the ptp API during the timewindow. Fix it by moving the ptp_clock_register() to the function end. Fixes: 0bf5eb788512 ("net: hns3: add support for PTP") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20250430093052.2400464-5-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-01net: hns3: fixed debugfs tm_qset sizeHao Lan
The size of the tm_qset file of debugfs is limited to 64 KB, which is too small in the scenario with 1280 qsets. The size needs to be expanded to 1 MB. Fixes: 5e69ea7ee2a6 ("net: hns3: refactor the debugfs process") Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Link: https://patch.msgid.link/20250430093052.2400464-4-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-01net: hns3: fix an interrupt residual problemYonglong Liu
When a VF is passthrough to a VM, and the VM is killed, the reported interrupt may not been handled, it will remain, and won't be clear by the nic engine even with a flr or tqp reset. When the VM restart, the interrupt of the first vector may be dropped by the second enable_irq in vfio, see the issue below: https://gitlab.com/qemu-project/qemu/-/issues/2884#note_2423361621 We notice that the vfio has always behaved this way, and the interrupt is a residue of the nic engine, so we fix the problem by moving the vector enable process out of the enable_irq loop. Fixes: 08a100689d4b ("net: hns3: re-organize vector handle") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Link: https://patch.msgid.link/20250430093052.2400464-3-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-01net: hns3: store rx VLAN tag offload state for VFJian Shen
The VF driver missed to store the rx VLAN tag strip state when user change the rx VLAN tag offload state. And it will default to enable the rx vlan tag strip when re-init VF device after reset. So if user disable rx VLAN tag offload, and trig reset, then the HW will still strip the VLAN tag from packet nad fill into RX BD, but the VF driver will ignore it for rx VLAN tag offload disabled. It may cause the rx VLAN tag dropped. Fixes: b2641e2ad456 ("net: hns3: Add support of hardware rx-vlan-offload to HNS3 VF driver") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250430093052.2400464-2-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-01Merge branch '200GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2025-04-29 (idpf, igc) For idpf: Michal fixes error path handling to remove memory leak. Larysa prevents reset from being called during shutdown. For igc: Jake adjusts locking order to resolve sleeping in atomic context. * '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: igc: fix lock order in igc_ptp_reset idpf: protect shutdown from reset idpf: fix potential memory leak on kcalloc() failure ==================== Link: https://patch.msgid.link/20250429221034.3909139-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-01octeon_ep: Fix host hang issue during device rebootSathesh B Edara
When the host loses heartbeat messages from the device, the driver calls the device-specific ndo_stop function, which frees the resources. If the driver is unloaded in this scenario, it calls ndo_stop again, attempting to free resources that have already been freed, leading to a host hang issue. To resolve this, dev_close should be called instead of the device-specific stop function.dev_close internally calls ndo_stop to stop the network interface and performs additional cleanup tasks. During the driver unload process, if the device is already down, ndo_stop is not called. Fixes: 5cb96c29aa0e ("octeon_ep: add heartbeat monitor") Signed-off-by: Sathesh B Edara <sedara@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250429114624.19104-1-sedara@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-01net: fec: ERR007885 Workaround for conventional TXMattias Barthel
Activate TX hang workaround also in fec_enet_txq_submit_skb() when TSO is not enabled. Errata: ERR007885 Symptoms: NETDEV WATCHDOG: eth0 (fec): transmit queue 0 timed out commit 37d6017b84f7 ("net: fec: Workaround for imx6sx enet tx hang when enable three queues") There is a TDAR race condition for mutliQ when the software sets TDAR and the UDMA clears TDAR simultaneously or in a small window (2-4 cycles). This will cause the udma_tx and udma_tx_arbiter state machines to hang. So, the Workaround is checking TDAR status four time, if TDAR cleared by hardware and then write TDAR, otherwise don't set TDAR. Fixes: 53bb20d1faba ("net: fec: add variable reg_desc_active to speed things up") Signed-off-by: Mattias Barthel <mattias.barthel@atlascopco.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250429090826.3101258-1-mattiasbarthel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-01net: lan743x: Fix memleak issue when GSO enabledThangaraj Samynathan
Always map the `skb` to the LS descriptor. Previously skb was mapped to EXT descriptor when the number of fragments is zero with GSO enabled. Mapping the skb to EXT descriptor prevents it from being freed, leading to a memory leak Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Thangaraj Samynathan <thangaraj.s@microchip.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250429052527.10031-1-thangaraj.s@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-01ptp: ocp: Fix NULL dereference in Adva board SMA sysfs operationsSagi Maimon
On Adva boards, SMA sysfs store/get operations can call __handle_signal_outputs() or __handle_signal_inputs() while the `irig` and `dcf` pointers are uninitialized, leading to a NULL pointer dereference in __handle_signal() and causing a kernel crash. Adva boards don't use `irig` or `dcf` functionality, so add Adva-specific callbacks `ptp_ocp_sma_adva_set_outputs()` and `ptp_ocp_sma_adva_set_inputs()` that avoid invoking `irig` or `dcf` input/output routines. Fixes: ef61f5528fca ("ptp: ocp: add Adva timecard support") Signed-off-by: Sagi Maimon <maimon.sagi@gmail.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20250429073320.33277-1-maimon.sagi@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-01net: use sock_gen_put() when sk_state is TCP_TIME_WAITJibin Zhang
It is possible for a pointer of type struct inet_timewait_sock to be returned from the functions __inet_lookup_established() and __inet6_lookup_established(). This can cause a crash when the returned pointer is of type struct inet_timewait_sock and sock_put() is called on it. The following is a crash call stack that shows sk->sk_wmem_alloc being accessed in sk_free() during the call to sock_put() on a struct inet_timewait_sock pointer. To avoid this issue, use sock_gen_put() instead of sock_put() when sk->sk_state is TCP_TIME_WAIT. mrdump.ko ipanic() + 120 vmlinux notifier_call_chain(nr_to_call=-1, nr_calls=0) + 132 vmlinux atomic_notifier_call_chain(val=0) + 56 vmlinux panic() + 344 vmlinux add_taint() + 164 vmlinux end_report() + 136 vmlinux kasan_report(size=0) + 236 vmlinux report_tag_fault() + 16 vmlinux do_tag_recovery() + 16 vmlinux __do_kernel_fault() + 88 vmlinux do_bad_area() + 28 vmlinux do_tag_check_fault() + 60 vmlinux do_mem_abort() + 80 vmlinux el1_abort() + 56 vmlinux el1h_64_sync_handler() + 124 vmlinux > 0xFFFFFFC080011294() vmlinux __lse_atomic_fetch_add_release(v=0xF2FFFF82A896087C) vmlinux __lse_atomic_fetch_sub_release(v=0xF2FFFF82A896087C) vmlinux arch_atomic_fetch_sub_release(i=1, v=0xF2FFFF82A896087C) + 8 vmlinux raw_atomic_fetch_sub_release(i=1, v=0xF2FFFF82A896087C) + 8 vmlinux atomic_fetch_sub_release(i=1, v=0xF2FFFF82A896087C) + 8 vmlinux __refcount_sub_and_test(i=1, r=0xF2FFFF82A896087C, oldp=0) + 8 vmlinux __refcount_dec_and_test(r=0xF2FFFF82A896087C, oldp=0) + 8 vmlinux refcount_dec_and_test(r=0xF2FFFF82A896087C) + 8 vmlinux sk_free(sk=0xF2FFFF82A8960700) + 28 vmlinux sock_put() + 48 vmlinux tcp6_check_fraglist_gro() + 236 vmlinux tcp6_gro_receive() + 624 vmlinux ipv6_gro_receive() + 912 vmlinux dev_gro_receive() + 1116 vmlinux napi_gro_receive() + 196 ccmni.ko ccmni_rx_callback() + 208 ccmni.ko ccmni_queue_recv_skb() + 388 ccci_dpmaif.ko dpmaif_rxq_push_thread() + 1088 vmlinux kthread() + 268 vmlinux 0xFFFFFFC08001F30C() Fixes: c9d1d23e5239 ("net: add heuristic for enabling TCP fraglist GRO") Signed-off-by: Jibin Zhang <jibin.zhang@mediatek.com> Signed-off-by: Shiming Cheng <shiming.cheng@mediatek.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250429020412.14163-1-shiming.cheng@mediatek.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-01bnxt_en: fix module unload sequenceVadim Fedorenko
Recent updates to the PTP part of bnxt changed the way PTP FIFO is cleared, skbs waiting for TX timestamps are now cleared during ndo_close() call. To do clearing procedure, the ptp structure must exist and point to a valid address. Module destroy sequence had ptp clear code running before netdev close causing invalid memory access and kernel crash. Change the sequence to destroy ptp structure after device close. Fixes: 8f7ae5a85137 ("bnxt_en: improve TX timestamping FIFO configuration") Reported-by: Taehee Yoo <ap420073@gmail.com> Closes: https://lore.kernel.org/netdev/CAMArcTWDe2cd41=ub=zzvYifaYcYv-N-csxfqxUvejy_L0D6UQ@mail.gmail.com/ Signed-off-by: Vadim Fedorenko <vadfed@meta.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Tested-by: Taehee Yoo <ap420073@gmail.com> Link: https://patch.msgid.link/20250430170343.759126-1-vadfed@meta.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-01Merge tag 'nvme-6.15-2025-05-01' of git://git.infradead.org/nvme into block-6.15Jens Axboe
Pull NVMe fixes from Christoph: "nvme fixes for Linux 6.15 - fix queue unquiesce check on PCI slot_reset (Keith Busch) - fix premature queue removal and I/O failover in nvme-tcp (Michael Liang) - don't restore null sk_state_change (Alistair Francis) - select CONFIG_TLS where needed (Alistair Francis) - always free derived key data (Hannes Reinecke) - more quirks (Wentao Guan)" * tag 'nvme-6.15-2025-05-01' of git://git.infradead.org/nvme: nvmet-auth: always free derived key data nvmet-tcp: don't restore null sk_state_change nvmet-tcp: select CONFIG_TLS from CONFIG_NVME_TARGET_TCP_TLS nvme-tcp: select CONFIG_TLS from CONFIG_NVME_TCP_TLS nvme-tcp: fix premature queue removal and I/O failover nvme-pci: add quirks for WDC Blue SN550 15b7:5009 nvme-pci: add quirks for device 126f:1001 nvme-pci: fix queue unquiesce check on slot_reset
2025-05-01smb: client: ensure aligned IO sizesPaulo Alcantara
Make all IO sizes multiple of PAGE_SIZE, either negotiated by the server or passed through rsize, wsize and bsize mount options, to prevent from breaking DIO reads and writes against servers that enforce alignment as specified in MS-FSA 2.1.5.3 and 2.1.5.4. Cc: linux-cifs@vger.kernel.org Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2025-05-01drm/rockchip: add CONFIG_OF dependencyArnd Bergmann
DRM_DISPLAY_DP_AUX_BUS cannot be selected when CONFIG_OF is disabled: WARNING: unmet direct dependencies detected for DRM_DISPLAY_DP_AUX_BUS Depends on [n]: HAS_IOMEM [=y] && DRM [=y] && OF [=n] Selected by [y]: - DRM_ROCKCHIP [=y] && HAS_IOMEM [=y] && DRM [=y] && ROCKCHIP_IOMMU [=y] && ROCKCHIP_ANALOGIX_DP [=y] Rockchip platforms all depend on OF anyway, so add the dependency here for compile testing. Fixes: d7b4936b2bc0 ("drm/rockchip: analogix_dp: Add support to get panel from the DP AUX bus") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Acked-by: Andy Yan <andy.yan@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20250423164422.2793634-1-arnd@kernel.org
2025-05-01bcachefs: Kill ERO for i_blocks check in truncateKent Overstreet
Replace with logging the error in the superblock. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-05-01bcachefs: check for inode.bi_sectors underflowKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-05-01bcachefs: Kill ERO in __bch2_i_sectors_acct()Kent Overstreet
We won't be root causing this in the immediate future, and it's fairly innocuous - so just log it in the superblock. https://github.com/koverstreet/bcachefs/issues/869 Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-05-01Merge tag 'asoc-fix-v6.15-rc4' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.15 A moderately large batch of fixes for v6.15, many driver specific including cleanups for the enabling of the Cirrus KUnit tests and a fix for a nasty crash on resume on AMD systems. We also have one core fix, for an ordering issue between DAPM and DPCM which could leave things incorrectly unpowered.
2025-05-01ASoC: intel/sdw_utils: Add volume limits to CS35L56Mark Brown
Merge series from Stefan Binding <sbinding@opensource.cirrus.com>: Both CS35L56 and CS42L43 have maximum volumes above 0dB. However, for many use cases, this can cause distorted audio, depending various factors, such as other signal-processing elements in the chain, for example if the audio passes through a gain control before reaching the amp or the signal path has been tuned for a particular maximum gain in the amp. In the cases where systems use the soc_sdw_* drivers, audio above the 0dB volume will likely always be distorted, therefore apply a 0dB limit to those devices. Stefan Binding (2): ASoC: intel/sdw_utils: Add volume limit to cs42l43 speakers ASoC: intel/sdw_utils: Add volume limit to cs35l56 speakers include/sound/soc_sdw_utils.h | 1 + sound/soc/sdw_utils/soc_sdw_bridge_cs35l56.c | 4 ++++ sound/soc/sdw_utils/soc_sdw_cs42l43.c | 10 ++++++++ sound/soc/sdw_utils/soc_sdw_cs_amp.c | 24 ++++++++++++++++++++ 4 files changed, 39 insertions(+) -- 2.43.0
2025-05-01ASoC: stm32: sai: fix kernel rate configurationMark Brown
Merge series from Olivier Moysan <olivier.moysan@foss.st.com>: This patchset adds some checks on kernel minimum rate requirements. This avoids potential clock rate misconfiguration, when setting the kernel frequency on STM32MP2 SoCs.
2025-05-01Merge tag 'drm-misc-fixes-2025-04-30' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes A spurious WARN fix for nouveau, an init and interrupt handling fixes for ivpu, a warning fix for ttm, a hotplug fix for fdinfo, vblank fixes for adp, a memory leak fix for the shmem kunit tests, and a timing fix for mipi-dbi. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <mripard@redhat.com> Link: https://lore.kernel.org/r/20250430-dark-eggplant-trout-c4ea6c@houat
2025-04-30kbuild: Properly disable -Wunterminated-string-initialization for clangNathan Chancellor
Clang and GCC have different behaviors around disabling warnings included in -Wall and -Wextra and the order in which flags are specified, which is exposed by clang's new support for -Wunterminated-string-initialization. $ cat test.c const char foo[3] = "FOO"; const char bar[3] __attribute__((__nonstring__)) = "BAR"; $ clang -fsyntax-only -Wextra test.c test.c:1:21: warning: initializer-string for character array is too long, array size is 3 but initializer has size 4 (including the null terminating character); did you mean to use the 'nonstring' attribute? [-Wunterminated-string-initialization] 1 | const char foo[3] = "FOO"; | ^~~~~ $ clang -fsyntax-only -Wextra -Wno-unterminated-string-initialization test.c $ clang -fsyntax-only -Wno-unterminated-string-initialization -Wextra test.c test.c:1:21: warning: initializer-string for character array is too long, array size is 3 but initializer has size 4 (including the null terminating character); did you mean to use the 'nonstring' attribute? [-Wunterminated-string-initialization] 1 | const char foo[3] = "FOO"; | ^~~~~ $ gcc -fsyntax-only -Wextra test.c test.c:1:21: warning: initializer-string for array of ‘char’ truncates NUL terminator but destination lacks ‘nonstring’ attribute (4 chars into 3 available) [-Wunterminated-string-initialization] 1 | const char foo[3] = "FOO"; | ^~~~~ $ gcc -fsyntax-only -Wextra -Wno-unterminated-string-initialization test.c $ gcc -fsyntax-only -Wno-unterminated-string-initialization -Wextra test.c Move -Wextra up right below -Wall in Makefile.extrawarn to ensure these flags are at the beginning of the warning options list. Move the couple of warning options that have been added to the main Makefile since commit e88ca24319e4 ("kbuild: consolidate warning flags in scripts/Makefile.extrawarn") to scripts/Makefile.extrawarn after -Wall / -Wextra to ensure they get properly disabled for all compilers. Fixes: 9d7a0577c9db ("gcc-15: disable '-Wunterminated-string-initialization' entirely for now") Link: https://github.com/llvm/llvm-project/issues/10359 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2025-05-01ASoC: amd: ps: fix for irq handler return statusVijendar Mukunda
If any Soundwire manager interrupt is reported, and wake interrupt is not reported, in this scenario irq_flag will be set to zero, which results in interrupt handler return status as IRQ_NONE. Add new irq flag 'wake_irq_flag' check for SoundWire wake interrupt handling to fix incorrect irq handling return status. Fixes: 3898b189079c8 ("ASoC: amd: ps: add soundwire wake interrupt handling") Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://patch.msgid.link/20250430195517.3065308-1-Vijendar.Mukunda@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-01ASoC: simple-card-utils: Fix pointer check in graph_util_parse_link_directionAlexander Stein
Actually check if the passed pointers are valid, before writing to them. This also fixes a USBAN warning: UBSAN: invalid-load in ../sound/soc/fsl/imx-card.c:687:25 load of value 255 is not a valid value for type '_Bool' This is because playback_only is uninitialized and is not written to, as the playback-only property is absent. Fixes: 844de7eebe97 ("ASoC: audio-graph-card2: expand dai_link property part") Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://patch.msgid.link/20250429094910.1150970-1-alexander.stein@ew.tq-group.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-01ASoC: intel/sdw_utils: Add volume limit to cs35l56 speakersStefan Binding
The volume control for cs35l56 speakers has a maximum gain of +12 dB. However, for many use cases, this can cause distorted audio, depending various factors, such as other signal-processing elements in the chain, for example if the audio passes through a gain control before reaching the amp or the signal path has been tuned for a particular maximum gain in the amp. In the case of systems which use the soc_sdw_* driver, audio will likely be distorted in all cases above 0 dB, therefore add a volume limit of 400, which is 0 dB maximum volume inside this driver. The volume limit should be applied to both soundwire and soundwire bridge configurations. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://patch.msgid.link/20250430103134.24579-3-sbinding@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-01ASoC: intel/sdw_utils: Add volume limit to cs42l43 speakersStefan Binding
The volume control for cs42l43 speakers has a maximum gain of +31.5 dB. However, for many use cases, this can cause distorted audio, depending various factors, such as other signal-processing elements in the chain, for example if the audio passes through a gain control before reaching the codec or the signal path has been tuned for a particular maximum gain in the codec. In the case of systems which use the soc_sdw_cs42l43 driver, audio will likely be distorted in all cases above 0 dB, therefore add a volume limit of 128, which is 0 dB maximum volume inside this driver. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250430103134.24579-2-sbinding@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-01ASoC: stm32: sai: add a check on minimal kernel frequencyOlivier Moysan
On MP2 SoCs SAI kernel clock rate is managed through stm32_sai_set_parent_rate() function. If the kernel clock rate was set previously to a low frequency, this frequency may be too low to support the newly requested audio stream rate. However the stm32_sai_rate_accurate() will only check accuracy against the maximum kernel clock rate. The function will return leaving the kernel clock rate unchanged. Add a check on minimal frequency requirement, to avoid this. Fixes: 2cfe1ff22555 ("ASoC: stm32: sai: add stm32mp25 support") Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com> Link: https://patch.msgid.link/20250430165210.321273-3-olivier.moysan@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-01ASoC: stm32: sai: skip useless iterations on kernel rate loopOlivier Moysan
the frequency of the kernel clock must be greater than or equal to the bitclock rate. When searching for a convenient kernel clock rate in stm32_sai_set_parent_rate() function, it is useless to continue the loop below bitclock rate, as it will result in a invalid kernel clock rate. Change the loop output condition. Fixes: 2cfe1ff22555 ("ASoC: stm32: sai: add stm32mp25 support") Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com> Link: https://patch.msgid.link/20250430165210.321273-2-olivier.moysan@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-04-30drm/amd/display: Rename program_timing function for better debuggingAntonio Fernando Silva e Cruz Filho
[WHY] Improve the output when using the ftrace debug feature, making it easier to identify which function is currently being executed. [HOW] Rename the program_timing function to a name that includes the path to the function's file. Signed-off-by: Antonio Fernando Silva e Cruz Filho <fernando.cruz.ctt@gmail.com> Co-developed-by: André Nogueira Ribeiro <r.andrenogueira@gmail.com> Signed-off-by: André Nogueira Ribeiro <r.andrenogueira@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-30drm/amdgpu/userq: remove unnecessary NULL checkDan Carpenter
The "ticket" pointer points to in the middle of the &exec struct so it can't be NULL. Remove the check. Reviewed-by: Christian König <christian.koenig@amd.com> Acked-by: Shashank Sharma <shashank.sharma@amd.com> Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-30drm/amdgpu/userq: Call unreserve on error in amdgpu_userq_fence_read_wptr()Dan Carpenter
This error path should call amdgpu_bo_unreserve() before returning. Fixes: d8675102ba32 ("drm/amdgpu: add vm root BO lock before accessing the vm") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-30drm/amdgpu: properly handle GC vs MM in amdgpu_vmid_mgr_init()Alex Deucher
When kernel queues are disabled, all GC vmids are available for the scheduler. MM vmids are still managed by the driver so make all 16 available. Also fix gmc 10 vs 11 mix up in commit 1f61fc28b939 ("drm/amdgpu/mes: make more vmids available when disable_kq=1") v2: Properly handle pre-GC 10 hardware Fixes: 1f61fc28b939 ("drm/amdgpu/mes: make more vmids available when disable_kq=1") Cc: Arvind Yadav <Arvind.Yadav@amd.com> Reviewed-by: Arvind Yadav <Arvind.Yadav@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-30drm/amdgpu/mes: use correct MES pipe for resetsAlex Deucher
Use the KIQ pipe for kernel queues and the SCHED pipe for user queues. Fixes: 2408b0272b04 ("drm/amdgpu/mes: consolidate on a single mes reset callback") Cc: Michael Chen <Michael.Chen@amd.com> Cc: Shaoyun Liu <Shaoyun.Liu@amd.com> Reviewed-by: Michael Chen <michael.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-30drm/amdgpu/mes: consolidate on a single mes reset callbackAlex Deucher
Use the legacy one as it covers both kernel queues and user queues. Reviewed-by: Sunil Khatri <sunil.khatri@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-30drm/amdgpu/mes: remove more unused functionsAlex Deucher
These were leftover from mes bring up and are unused. Reviewed-by: Sunil Khatri <sunil.khatri@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-30drm/amdgpu/userq: fix user_queue parameters listBagas Sanjaya
Sphinx reports htmldocs warning: Documentation/gpu/amdgpu/module-parameters:7: drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c:1119: ERROR: Unexpected indentation. [docutils] Fix the warning by using reST bullet list syntax for user_queue parameter options, separated from preceding paragraph by a blank line. Fixes: fb20954c9717 ("drm/amdgpu/userq: rework driver parameter") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Closes: https://lore.kernel.org/linux-next/20250422202956.176fb590@canb.auug.org.au/ Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-30drm/amdgpu: Fix comment styleLijo Lazar
Fix code comment style Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202504271826.xy2fFO28-lkp@intel.com/ Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-30drm/amd/pm: Fix comment styleLijo Lazar
Fix code comment style Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202504271422.D6cqMlZ0-lkp@intel.com/ Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-30drm/amdgpu: Print bootloader status for long waitsLijo Lazar
If it needs a long wait for completion of bootloader execution, report the status in between. That helps to know if there is some issue during bootloader execution. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-30drm/amdgpu: refine MES register print for devices of hiveYifan Zha
[Why] Register access print missed device info. [How] Using dev_xxx instead of DRM_xxx to indicate which device of a hive is the message for. Signed-off-by: Yifan Zha <Yifan.Zha@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-30drm/amdgpu: Fix query order of XGMI v6.4.1 statusLijo Lazar
Keep the register offsets as per link order for querying XGMI v6.4.1 link status. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Mangesh Gadre <Mangesh.Gadre@amd.com> Fixes: 6dee64e765c4 ("drm/amdgpu: Fix xgmi v6.4.1 link status reporting") Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-30drm/amd/pm: Add board voltage node to hwmonAsad Kamal
Add and expose board voltage node as vddboard to hwmon for smu_v13_0_6 v2: Replace ip check with supported sensor attribute(Lijo) Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-30drm/amdgpu: Fix API status offset for MES queue resetJesse.Zhang
The mes_v11_0_reset_hw_queue and mes_v12_0_reset_hw_queue functions were using the wrong union type (MESAPI__REMOVE_QUEUE) when getting the offset for api_status. Since these functions handle queue reset operations, they should use MESAPI__RESET union instead. This fixes the polling of API status during hardware queue reset operations in the MES for both v11 and v12 versions. Signed-off-by: Jesse Zhang <jesse.zhang@amd.com> Reviewed-By: Shaoyun.liu <Shaoyun.liu@amd.com> Reviewed-by: Prike Liang <Prike.Liang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-30drm/amd/pm: Add voltage caps for smu_v13_0_6Asad Kamal
Add & enable board voltage caps for smu_v13_0_6 v3: Update version check for board voltage support Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-30drm/amd/pm: Fill static metrics dataAsad Kamal
Fill static metrics data for smu_v13_0_6 v2: Proceed with driver load just with warning even if board voltage reads invalid value Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-30drm/amd/pm: Use common function to fetch static metrics tableAsad Kamal
Use common function to fetch static metrics table for smu_v13_0_12 Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-07-16 19:03:54 +0000