summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-08-24net: mv643xx_eth: Be drop monitor friendlyFlorian Fainelli
txq_reclaim() does the normal transmit queue reclamation and rxq_deinit() does the RX ring cleanup, none of these are packet drops, so use dev_consume_skb() for both locations. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24tg3: Be drop monitor friendlyFlorian Fainelli
tg3_tx() does the normal packet TX completion, tigon3_dma_hwbug_workaround() and tg3_tso_bug() both need to allocate a new SKB that is suitable to workaround HW bugs, and finally tg3_free_rings() is doing ring cleanup. Use dev_consume_skb_any() for these 3 locations to be SKB drop monitor friendly. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24Merge branch 'ipv6-Route-ICMPv6-errors-with-the-flow-when-ECMP-in-use'David S. Miller
Jakub Sitnicki says: ==================== ipv6: Route ICMPv6 errors with the flow when ECMP in use This patch set is another take at making Path MTU Discovery work when server nodes are behind a router employing multipath routing in a load-balance or anycast setup (that is, when not every end-node can be reached by every path). The problem has been well described in RFC 7690 [1], but in short - in such setups ICMPv6 PTB errors are not guaranteed to be routed back to the server node that sent a reply that exceeds path MTU. The proposed solution is two-fold: (1) on the server side - reflect the Flow Label [2]. This can be done without modifying the application using a new per-netns sysctl knob that has been proposed independently of this patchset in the patch entitled "ipv6: Add sysctl for per namespace flow label reflection" [3]. (2) on the ECMP router - make the ipv6 routing subsystem look into the ICMPv6 error packets and compute the flow-hash from its payload, i.e. the offending packet that triggered the error. This is the same behavior as ipv4 stack has already. With both parts in place Path MTU Discovery can work past the ECMP router when using IPv6. [1] https://tools.ietf.org/html/rfc7690 [2] https://tools.ietf.org/html/draft-wang-6man-flow-label-reflection-01 [3] http://patchwork.ozlabs.org/patch/804870/ v1 -> v2: - don't use "extern" in external function declaration in header file - style change, put as many arguments as possible on the first line of a function call, and align consecutive lines to the first argument - expand the cover letter based on the feedback v2 -> v3: - switch to computing flow-hash using flow dissector to align with recent changes to multipath routing in ipv4 stack - add a sysctl knob for enabling flow label reflection per netns --- Testing has covered multipath routing of ICMPv6 PTB errors in forward and local output path in a simple use-case of an HTTP server sending a reply which is over the path MTU size [3]. I have also checked if the flows get evenly spread over multiple paths (i.e. if there are no regressions) [4]. [3] https://github.com/jsitnicki/tools/tree/master/net/tests/ecmp/pmtud [4] https://github.com/jsitnicki/tools/tree/master/net/tests/ecmp/load-balance ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24ipv6: Use multipath hash from flow info if availableJakub Sitnicki
Allow our callers to influence the choice of ECMP link by honoring the hash passed together with the flow info. This allows for special treatment of ICMP errors which we would like to route over the same path as the IPv6 datagram that triggered the error. Also go through rt6_multipath_hash(), in the usual case when we aren't dealing with an ICMP error, so that there is one central place where multipath hash is computed. Signed-off-by: Jakub Sitnicki <jkbs@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24ipv6: Fold rt6_info_hash_nhsfn() into its only callerJakub Sitnicki
Commit 644d0e656958 ("ipv6 Use get_hash_from_flowi6 for rt6 hash") has turned rt6_info_hash_nhsfn() into a one-liner, so it no longer makes sense to keep it around. Also remove the accompanying comment that has become outdated. Signed-off-by: Jakub Sitnicki <jkbs@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24ipv6: Compute multipath hash for ICMP errors from offending packetJakub Sitnicki
When forwarding or sending out an ICMPv6 error, look at the embedded packet that triggered the error and compute a flow hash over its headers. This let's us route the ICMP error together with the flow it belongs to when multipath (ECMP) routing is in use, which in turn makes Path MTU Discovery work in ECMP load-balanced or anycast setups (RFC 7690). Granted, end-hosts behind the ECMP router (aka servers) need to reflect the IPv6 Flow Label for PMTUD to work. The code is organized to be in parallel with ipv4 stack: ip_multipath_l3_keys -> ip6_multipath_l3_keys fib_multipath_hash -> rt6_multipath_hash Signed-off-by: Jakub Sitnicki <jkbs@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24net: Extend struct flowi6 with multipath hashJakub Sitnicki
Allow for functions that fill out the IPv6 flow info to also pass a hash computed over the skb contents. The hash value will drive the multipath routing decisions. This is intended for special treatment of ICMPv6 errors, where we would like to make a routing decision based on the flow identifying the offending IPv6 datagram that triggered the error, rather than the flow of the ICMP error itself. Signed-off-by: Jakub Sitnicki <jkbs@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24devlink: Fix devlink_dpipe_table_register() stub signature.David S. Miller
One too many arguments compared to the non-stub version. Reported-by: kbuild test robot <fengguang.wu@intel.com> Fixes: ffd3cdccf214 ("devlink: Add support for dynamic table size") Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24ipv6: Add sysctl for per namespace flow label reflectionJakub Sitnicki
Reflecting IPv6 Flow Label at server nodes is useful in environments that employ multipath routing to load balance the requests. As "IPv6 Flow Label Reflection" standard draft [1] points out - ICMPv6 PTB error messages generated in response to a downstream packets from the server can be routed by a load balancer back to the original server without looking at transport headers, if the server applies the flow label reflection. This enables the Path MTU Discovery past the ECMP router in load-balance or anycast environments where each server node is reachable by only one path. Introduce a sysctl to enable flow label reflection per net namespace for all newly created sockets. Same could be earlier achieved only per socket by setting the IPV6_FL_F_REFLECT flag for the IPV6_FLOWLABEL_MGR socket option. [1] https://tools.ietf.org/html/draft-wang-6man-flow-label-reflection-01 Signed-off-by: Jakub Sitnicki <jkbs@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24net/mlx5e: make mlx5e_profile constBhumika Goyal
Make this const as it is only passed as an argument to the function mlx5e_create_netdev and the corresponding argument is of type const. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24net/mlx4_core: make mlx4_profile constBhumika Goyal
Make these const as they are only used in a copy operation. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24Merge branch 'xdp-more-work-on-xdp-tracepoints'David S. Miller
Jesper Dangaard Brouer says: ==================== xdp: more work on xdp tracepoints More work on streamlining and performance optimizing the tracepoints for XDP. I've created a simple xdp_monitor application that uses this tracepoint, and prints statistics. Available at github: https://github.com/netoptimizer/prototype-kernel/blob/master/kernel/samples/bpf/xdp_monitor_kern.c https://github.com/netoptimizer/prototype-kernel/blob/master/kernel/samples/bpf/xdp_monitor_user.c The improvement over tracepoint with strcpy: 9810372 - 8428762 = +1381610 pps faster - (1/9810372 - 1/8428762)*10^9 = -16.7 nanosec - 100-(8428762/9810372*100) = strcpy-trace is 14.08% slower - 981037/8428762*100 = removing strcpy made it 11.64% faster V3: Fix merge conflict with commit e4a8e817d3cb ("bpf: misc xdp redirect cleanups") V2: Change trace_xdp_redirect() to align with args of trace_xdp_exception() ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24xdp: get tracepoints xdp_exception and xdp_redirect in syncJesper Dangaard Brouer
Remove the net_device string name from the xdp_exception tracepoint, like the xdp_redirect tracepoint. Align the TP_STRUCT to have common entries between these two tracepoint. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24xdp: remove net_device names from xdp_redirect tracepointJesper Dangaard Brouer
There is too much overhead in the current trace_xdp_redirect tracepoint as it does strcpy and strlen on the net_device names. Besides, exposing the ifindex/index is actually the information that is needed in the tracepoint to diagnose issues. When a lookup fails (either ifindex or devmap index) then there is a need for saying which to_index that have issues. V2: Adjust args to be aligned with trace_xdp_exception. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24ixgbe: use return codes from ndo_xdp_xmit that are distinguishableJesper Dangaard Brouer
For XDP_REDIRECT the use of return code -EINVAL is confusing, as it is used in three different cases. (1) When the index or ifindex lookup fails, and in the ixgbe driver (2) when link is down and (3) when XDP have not been enabled. The return code can be picked up by the tracepoint xdp:xdp_redirect for diagnosing why XDP_REDIRECT isn't working. Thus, there is a need different return codes to tell the issues apart. I'm considering using a specific err-code scheme for XDP_REDIRECT instead of using these errno codes. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24xdp: make generic xdp redirect use tracepoint trace_xdp_redirectJesper Dangaard Brouer
If the xdp_do_generic_redirect() call fails, it trigger the trace_xdp_exception tracepoint. It seems better to use the same tracepoint trace_xdp_redirect, as the native xdp_do_redirect{,_map} does. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24xdp: remove bpf_warn_invalid_xdp_redirectJesper Dangaard Brouer
Given there is a tracepoint that can track the error code of xdp_do_redirect calls, the WARN_ONCE in bpf_warn_invalid_xdp_redirect doesn't seem relevant any longer. Simply remove the function. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24Merge branch 'mlxsw-ipv4-host-dpipe-table'David S. Miller
Jiri Pirko says: ==================== mlxsw: Add IPv4 host dpipe table Arkadi says: This patchset adds IPv4 host dpipe table support. This will provide the ability to observe the hardware offloaded IPv4 neighbors. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24mlxsw: spectrum_dpipe: Add support for controlling neighbor countersArkadi Sharshevsky
Add support for controlling neighbor counters via dpipe. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24mlxsw: spectrum_dpipe: Add support for IPv4 host table dumpArkadi Sharshevsky
Add support for IPv4 host table dump. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24mlxsw: spectrum_router: Add support for setting counters on neighborsArkadi Sharshevsky
Add support for setting counters on neighbors based on dpipe's host table counter status. This patch also adds the ability for getting the counter value, which will be used by the dpipe host table implementation in the next patches. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24mlxsw: reg: Make flow counter set type enum to be sharedArkadi Sharshevsky
This is done as a preparation before introducing support for neighbor counters. The flow counter's type enum is used by many registers, yet, until now it was used only by mgpc and thus it was private. This patch updates the namespace for more generic usage. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24mlxsw: spectrum_dpipe: Add IPv4 host table initial supportArkadi Sharshevsky
Add IPv4 host table initial support. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24mlxsw: spectrum_dpipe: Fix label nameArkadi Sharshevsky
Change label name for case of erif table init failure. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24mlxsw: spectrum_router: Add helpers for neighbor accessArkadi Sharshevsky
This is done as a preparation before introducing the ability to dump the host table via dpipe, and to count the table size. The mlxsw's neighbor representative struct stays private to the router module. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24devlink: Move dpipe entry clear function into devlinkArkadi Sharshevsky
The entry clear routine can be shared between the drivers, thus it is moved inside devlink. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24devlink: Add support for dynamic table sizeArkadi Sharshevsky
Up until now the dpipe table's size was static and known at registration time. The host table does not have constant size and it is resized in dynamic manner. In order to support this behavior the size is changed to be obtained dynamically via an op. This patch also adjust the current dpipe table for the new API. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24mlxsw: spectrum_dpipe: Fix erif table op name spaceArkadi Sharshevsky
Fix ERIF's table operations name space. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24devlink: Add IPv4 header for dpipeArkadi Sharshevsky
This will be used by the IPv4 host table which will be introduced in the following patches. This header is global and can be reused by many drivers. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24devlink: Add Ethernet header for dpipeArkadi Sharshevsky
This will be used by the IPv4 host table which will be introduced in the following patches. This header is global and can be reused by many drivers. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-23bpf: netdev is never null in __dev_map_flushDaniel Borkmann
No need to test for it in fast-path, every dev in bpf_dtab_netdev is guaranteed to be non-NULL, otherwise dev_map_update_elem() will fail in the first place. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-23bpf, doc: Add arm32 as arch supporting eBPF JITShubham Bansal
As eBPF JIT support for arm32 was added recently with commit 39c13c204bb1150d401e27d41a9d8b332be47c49, it seems appropriate to add arm32 as arch with support for eBPF JIT in bpf and sysctl docs as well. Signed-off-by: Shubham Bansal <illusionist.neo@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-23Merge branch 'bpf-verifier-fixes'David S. Miller
Edward Cree says: ==================== bpf: verifier fixes Fix a couple of bugs introduced in my recent verifier patches. Patch #2 does slightly increase the insn count on bpf_lxc.o, but only by about a hundred insns (i.e. 0.2%). v2: added test for write-marks bug (patch #1); reworded comment on propagate_liveness() for clarity. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-23bpf/verifier: document liveness analysisEdward Cree
The liveness tracking algorithm is quite subtle; add comments to explain it. Signed-off-by: Edward Cree <ecree@solarflare.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-23bpf/verifier: remove varlen_map_value_access flagEdward Cree
The optimisation it does is broken when the 'new' register value has a variable offset and the 'old' was constant. I broke it with my pointer types unification (see Fixes tag below), before which the 'new' value would have type PTR_TO_MAP_VALUE_ADJ and would thus not compare equal; other changes in that patch mean that its original behaviour (ignore min/max values) cannot be restored. Tests on a sample set of cilium programs show no change in count of processed instructions. Fixes: f1174f77b50c ("bpf/verifier: rework value tracking") Signed-off-by: Edward Cree <ecree@solarflare.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-23selftests/bpf: add a test for a pruning bug in the verifierAlexei Starovoitov
The test makes a read through a map value pointer, then considers pruning a branch where the register holds an adjusted map value pointer. It should not prune, but currently it does. Signed-off-by: Alexei Starovoitov <ast@fb.com> [ecree@solarflare.com: added test-name and patch description] Signed-off-by: Edward Cree <ecree@solarflare.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-23bpf/verifier: when pruning a branch, ignore its write marksEdward Cree
The fact that writes occurred in reaching the continuation state does not screen off its reads from us, because we're not really its parent. So detect 'not really the parent' in do_propagate_liveness, and ignore write marks in that case. Fixes: dc503a8ad984 ("bpf/verifier: track liveness for pruning") Signed-off-by: Edward Cree <ecree@solarflare.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-23selftests/bpf: add a test for a bug in liveness-based pruningEdward Cree
Writes in straight-line code should not prevent reads from propagating along jumps. With current verifier code, the jump from 3 to 5 does not add a read mark on 3:R0 (because 5:R0 has a write mark), meaning that the jump from 1 to 3 gets pruned as safe even though R0 is NOT_INIT. Verifier output: 0: (61) r2 = *(u32 *)(r1 +0) 1: (35) if r2 >= 0x0 goto pc+1 R1=ctx(id=0,off=0,imm=0) R2=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0 2: (b7) r0 = 0 3: (35) if r2 >= 0x0 goto pc+1 R0=inv0 R1=ctx(id=0,off=0,imm=0) R2=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0 4: (b7) r0 = 0 5: (95) exit from 3 to 5: safe from 1 to 3: safe processed 8 insns, stack depth 0 Signed-off-by: Edward Cree <ecree@solarflare.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-23gre: remove duplicated assignment of iphColin Ian King
iph is being assigned the same value twice; remove the redundant first assignment. (Thanks to Nikolay Aleksandrov for pointing out that the first asssignment should be removed and not the second) Fixes warning: net/ipv4/ip_gre.c:265:2: warning: Value stored to 'iph' is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-23net: tipc: constify genl_opsArvind Yadav
genl_ops are not supposed to change at runtime. All functions working with genl_ops provided by <net/genetlink.h> work with const genl_ops. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-23net: hinic: make functions set_ctrl0 and set_ctrl1 staticColin Ian King
The functions set_ctrl0 and set_ctrl1 are local to the source and do not need to be in global scope, so make them static. Cleans up sparse warnings: symbol 'set_ctrl0' was not declared. Should it be static? symbol 'set_ctrl1' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-23net/sock: allow the user to set negative peek offsetPaolo Abeni
This is necessary to allow the user to disable peeking with offset once it's enabled. Unix sockets already allow the above, with this patch we permit it for udp[6] sockets, too. Fixes: 627d2d6b5500 ("udp: enable MSG_PEEK at non-zero offset") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-23Merge branch 'mlxsw-multichain-tc-offload'David S. Miller
Jiri Pirko says: ==================== mlxsw: spectrum: Introduce multichain TC offload This patchset introduces offloading of rules added to chain with non-zero index, which was previously forbidden. Also, goto_chain termination action is offloaded allowing to jump to processing of desired chain. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-23mlxsw: spectrum_flower: Offload goto_chain termination actionJiri Pirko
If action is gact goto_chain, offload it to HW by jumping to another ruleset. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-23mlxsw: spectrum_acl: Provide helper to lookup rulesetJiri Pirko
We need to lookup ruleset in order to offload goto_chain termination action. This patch adds it. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-23mlxsw: spectrum_acl: Allow to get group_id value for a rulesetJiri Pirko
For goto_chain action we need to know group_id of a ruleset to jump to. Provide infrastructure in order to get it. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-23net: sched: add couple of goto_chain helpersJiri Pirko
Add helpers to find out if a gact instance is goto_chain termination action and to get chain index. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-23mlxsw: spectrum: Offload multichain TC rulesJiri Pirko
Reflect chain index coming down from TC core and create a ruleset per chain. Note that only chain 0, being the implicit chain, is bound to the device for processing. The rest of chains have to be "jumped-to" by actions. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-23Merge branch 'mvpp2-software-TSO-support'David S. Miller
Antoine Tenart says: ==================== net: mvpp2: software TSO support This series adds the s/w TSO support in the PPv2 driver, in addition to two cosmetic commits. As stated in patch 3/3: Using iperf and 10G ports, using TSO shows a significant performance improvement by a factor 2 to reach around 9.5Gbps in TX; as well as a significant CPU usage drop (from 25% to 15%). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-23net: mvpp2: software tso supportAntoine Ténart
The patch uses the tso API to implement the tso functionality in Marvell PPv2 driver. Using iperf and 10G ports, using TSO shows a significant performance improvement by a factor 2 to reach around 9.5Gbps in TX; as well as a significant CPU usage drop (from 25% to 15%). Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-07-16 07:59:49 +0000