summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-10-13drm: Add retries for lspcon mode detectionShashank Sharma
From the CI builds, its been observed that during a driver reload/insert, dp dual mode read function sometimes fails to read from LSPCON device over i2c-over-aux channel. This patch: - adds some delay and few retries, allowing a scope for these devices to settle down and respond. - changes one error log's level from ERROR->DEBUG as we want to call it an error only after all the retries are exhausted. V2: Addressed review comments from Jani (for loop for retry) V3: Addressed review comments from Imre (break on partial read too) V3: Addressed review comments from Ville/Imre (Add the retries exclusively for LSPCON, not for all dp_dual_mode devices) V4: Added r-b from Imre, sending it to dri-devel (Jani) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102294 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102295 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102359 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103186 Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1507826408-19322-1-git-send-email-shashank.sharma@intel.com
2017-10-13drm/i915/bdw: Fix DP_AUX_CH_CTL_TIME_OUT settingJames Ausmus
Per BSpec, 400us is "BDW+ Do not use this setting." - not just PORT_A. Set BDW to 600us unconditionally. v2: -Split in to two patches (Rodrigo) Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: James Ausmus <james.ausmus@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171012213037.4245-2-james.ausmus@intel.com
2017-10-13drm/i915: Fix DP_AUX_CH_CTL_TIME_OUT namingJames Ausmus
Rename DP_AUX_CH_CTL_TIME_OUT_1600us to DP_AUX_CH_CTL_TIME_OUT_MAX, as the meaning of the (3 << 26) value varies per platform, but it's always the maximum timeout for that platform. Pre-CNL it means 1600us, and for CNL it means 3200us. v2: -Split in to two patches (Rodrigo) Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: James Ausmus <james.ausmus@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171012213037.4245-1-james.ausmus@intel.com
2017-10-13Merge tag 'omapdrm-4.15' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-next omapdrm changes for 4.15 * OMAP4 HDMI CEC support * tag 'omapdrm-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: omapdrm: omapdss_hdmi_ops: add lost_hotplug op omapdrm: hdmi4: hook up the HDMI CEC support omapdrm: hdmi4_cec: add OMAP4 HDMI CEC support omapdrm: hdmi4: refcount hdmi_power_on/off_core omapdrm: hdmi4: move hdmi4_core_powerdown_disable to hdmi_power_on_core() omapdrm: hdmi4: prepare irq handling for HDMI CEC support omapdrm: hdmi4: make low-level functions available omapdrm: hdmi.h: extend hdmi_core_data with CEC fields omapdrm: encoder-tpd12s015: keep ls_oe_gpio high
2017-10-13Merge tag 'drm-misc-next-2017-10-12' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next More 4.15 drm-misc stuff: Cross-subsystem Changes: - bridge cleanup refactor (Benjamin Gaignard) Core Changes: - less surprising atomic iterators (Maarten), fixes an oops introduced in drm-next - better gem/fb helper docs (Noralf) - fix dma-buf rcu races (Christian König) Driver Changes: - adv7511: CEC support (Hans Verkuil) - sun4i update from Chen-Yu to improve hdmi and A31 support - sii8620: add remote control support (Maceiej Purski) New drivers: - SiI9234 bridge driver (Maciej Purski) - 7" rpi touch panel (Eric Anholt) Note that this contains a topic pull from regmap, needed by the sun4i changes. Mark Brown sent that out for pulling into drm-misc. * tag 'drm-misc-next-2017-10-12' of git://anongit.freedesktop.org/drm/drm-misc: (29 commits) drm/dp: WARN about invalid/unknown link rates and bw codes drm/msm/mdp5: remove less than 0 comparison for unsigned value drm/bridge/sii8620: add remote control support drm/sun4i: hdmi: Add support for A31's HDMI controller drm/sun4i: hdmi: Add A31 specific DDC register definitions drm/sun4i: hdmi: Add support for controller hardware variants dt-bindings: display: sun4i: Add binding for A31 HDMI controller drm/sun4i: hdmi: Allow using second PLL as TMDS clk parent drm/sun4i: hdmi: create a regmap for later use drm/sun4i: hdmi: Disable clks in bind function error path and unbind function drm/sun4i: tcon: Add support for demuxing TCON output on A31 drm/sun4i: tcon: Add variant callback for TCON output muxing drm/bridge/synopsys: dsi :remove is_panel_bridge drm/vc4: remove bridge from driver internal structure drm/stm: ltdc: remove bridge from driver internal structure drm/drm_of: add drm_of_panel_bridge_remove function drm/bridge: make drm_panel_bridge_remove more robust dma-fence: fix dma_fence_get_rcu_safe v2 dma-buf: make reservation_object_copy_fences rcu save drm/atomic: Unref duplicated drm_atomic_state in drm_atomic_helper_resume() ...
2017-10-13drm/rockchip: add PINCTRL dependency for LVDSArnd Bergmann
The new driver fails to build when CONFIG_PINCTRL is disabled: drivers/gpu/drm/rockchip/rockchip_lvds.c: In function 'rockchip_lvds_grf_config': drivers/gpu/drm/rockchip/rockchip_lvds.c:229:39: error: dereferencing pointer to incomplete type 'struct dev_pin_info' if (lvds->pins && !IS_ERR(lvds->pins->default_state)) This adds the respective Kconfig dependency. Fixes: 34cc0aa25456 ("drm/rockchip: Add support for Rockchip Soc LVDS") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Yao <mark.yao@rock-chips.com> Signed-off-by: Mark Yao <mark.yao@rock-chips.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171005120957.485433-1-arnd@arndb.de
2017-10-13drm: vblank: remove drm_timestamp_monotonic parameterArnd Bergmann
There is a risk of overflowing vblank timestamps in 2038 or 2106 if someone sets the drm_timestamp_monotonic module parameter to zero. I found no indication of anyone ever setting the parameter, or complaining about the default being wrong, after it was introduced as a way to handle backwards-compatibility with linux prior to c61eef726a78 ("drm: add support for monotonic vblank timestamps"), so it's probably safer to just remove the parameter completely and only allowing the default behavior. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2017-10-13drm: vblank: use ktime_t instead of timevalArnd Bergmann
The drm vblank handling uses 'timeval' to store timestamps in either monotonic or wall-clock time base. In either case, it reads the current time as a ktime_t in get_drm_timestamp() and converts it from there. This is a bit suspicious, as users of 'timeval' often suffer from the time_t overflow in y2038. I have gone through this code and found that it is unlikely to cause problems here: - The user space ABI does not use time_t or timeval, but uses 'u32' and 'long' as the types. This means at least that rebuilding user programs against a new libc with 64-bit time_t does not change the ABI. - As of commit c61eef726a78 ("drm: add support for monotonic vblank timestamps") in linux-3.8, the monotonic timestamp is the default and can only get reverted to wall-clock through a module-parameter. - With the default monotonic timestamps, there is no problem at all. - The drm_wait_vblank_ioctl() interface is alway safe on 64-bit architectures, on 32-bit it might overflow the 'long' timestamps in 2038 with wall-clock timestamps. - The event handling uses 'u32' seconds, which overflow in 2106 on both 32-bit and 64-bit machines, when wall-clock timestamps are used. - The effect of overflowing either of the two is only temporary (during the overflow, and is likely to keep working again afterwards. It is likely the same problem as observing a 'settimeofday()' call, which was the reason for moving to the monotonic timestamps in the first place. Overall, this seems good enough, so my patch removes the use of 'timeval' from the vblank handling altogether and uses ktime_t consistently, except for the part where we copy the data to user space structures in the existing format. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2017-10-12drm/i915/selftests: Exercise adding requests to a full GGTTChris Wilson
A bug recently encountered involved the issue where are we were submitting requests to different ppGTT, each would pin a segment of the GGTT for its logical context and ring. However, this is invisible to eviction as we do not tie the context/ring VMA to a request and so do not automatically wait upon it them (instead they are marked as pinned, preventing eviction entirely). Instead the eviction code must flush those contexts by switching to the kernel context. This selftest tries to fill the GGTT with contexts to exercise a path where the switch-to-kernel-context failed to make forward progress and we fail with ENOSPC. v2: Make the hole in the filled GGTT explicit. v3: Swap out the arbitrary timeout for a private notification from i915_gem_evict_something() Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171012125726.14736-3-chris@chris-wilson.co.uk Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2017-10-12drm/i915/selftests: Wrap a timer into a i915_sw_fenceChris Wilson
For some selftests, we want to issue requests but delay them going to hardware. Furthermore, we don't want those requests to block indefinitely (or else we may hang the driver and block testing) so we want to employ a timeout. So naturally we want a fence that is automatically signaled by a timer. v2: Add kselftests. v3: Limit the API available to selftests; there isn't an overwhelming reason to export it universally. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171012125726.14736-2-chris@chris-wilson.co.uk Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2017-10-12drm/i915: Fix eviction when the GGTT is idle but fullChris Wilson
In the full-ppgtt world, we can fill the GGTT full of context objects. These context objects are currently implicitly tracked by the requests that pin them i.e. they are only unpinned when the request is completed and retired, but we do not have the link from the vma to the request (anymore). In order to unpin those contexts, we have to issue another request and wait upon the switch to the kernel context. The bug during eviction was that we assumed that a full GGTT meant we would have requests on the GGTT timeline, and so we missed situations where those requests where merely in flight (and when even they have not yet been submitted to hw yet). The fix employed here is to change the already-is-idle test to no look at the execution timeline, but count the outstanding requests and then check that we have switched to the kernel context. Erring on the side of overkill here just means that we stall a little longer than may be strictly required, but we only expect to hit this path in extreme corner cases where returning an erroneous error is worse than the delay. v2: Logical inversion when swapping over branches. Fixes: 80b204bce8f2 ("drm/i915: Enable multiple timelines") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171012125726.14736-1-chris@chris-wilson.co.uk
2017-10-12drm/i915: Start tracking PSR state in crtc stateVille Syrjälä
Add the minimal amount of PSR tracking into the crtc state. This allows precomputing the possibility of using PSR correctly, and it means we can safely call the psr enable/disable functions for any DP endcoder. As a nice bonus we get rid of some more crtc->config usage, which we want to kill off eventually. v2: Fix 'goto unlock' fail in intel_psr_enable() (Jani) Check intel_dp_is_edp() in is_edp_psr() (Jani) Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171012130201.21318-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2017-10-12drm/kirin: Checking for IS_ERR() instead of NULLDan Carpenter
The of_graph_get_remote_node() function doesn't return error pointers, it returns NULL on error so I've updated the check. Fixes: 86418f90a4c1 ("drm: convert drivers to use of_graph_get_remote_node") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20171005125751.jvtjms62vbtxuvak@mwanda
2017-10-12drm/i915: Update DRIVER_DATE to 20171012Jani Nikula
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-10-12driver:gpu: return -ENOMEM on allocation failure.Allen Pais
Signed-off-by: Allen Pais <allen.lkml@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1505287939-14106-3-git-send-email-allen.lkml@gmail.com
2017-10-12drm/vblank: Fix flip event vblank countVille Syrjälä
On machines where the vblank interrupt fires some time after the start of vblank (or we just manage to race with the vblank interrupt handler) we will currently stuff a stale vblank counter value into the flip event, and thus we'll prematurely complete the flip. Switch over to drm_crtc_accurate_vblank_count() to make sure we have an up to date counter value, crucially also remember to add the +1 so that the delayed vblank interrupt won't complete the flip prematurely. Cc: stable@vger.kernel.org Cc: Daniel Vetter <daniel@ffwll.ch> Suggested-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171010133322.24029-1-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel@ffwll.ch> #irc
2017-10-12drm/i915: Simplify intel_sanitize_enable_ppgttJoonas Lahtinen
Remove dead code around has_aliasing_ppgtt condition. Suggested-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171010143355.16577-1-joonas.lahtinen@linux.intel.com
2017-10-12drm/i915/userptr: Drop struct_mutex before cleanupChris Wilson
Purely to silence lockdep, as we know that no bo can exist at this time and so the inversion is impossible. Nevertheless, lockdep currently warns on unload: [ 137.522565] WARNING: possible circular locking dependency detected [ 137.522568] 4.14.0-rc4-CI-CI_DRM_3209+ #1 Tainted: G U [ 137.522570] ------------------------------------------------------ [ 137.522572] drv_module_relo/1532 is trying to acquire lock: [ 137.522574] ("i915-userptr-acquire"){+.+.}, at: [<ffffffff8109a831>] flush_workqueue+0x91/0x540 [ 137.522581] but task is already holding lock: [ 137.522583] (&dev->struct_mutex){+.+.}, at: [<ffffffffa014fb3f>] i915_gem_fini+0x3f/0xc0 [i915] [ 137.522605] which lock already depends on the new lock. [ 137.522608] the existing dependency chain (in reverse order) is: [ 137.522611] -> #3 (&dev->struct_mutex){+.+.}: [ 137.522615] __lock_acquire+0x1420/0x15e0 [ 137.522618] lock_acquire+0xb0/0x200 [ 137.522621] __mutex_lock+0x86/0x9b0 [ 137.522623] mutex_lock_interruptible_nested+0x1b/0x20 [ 137.522640] i915_mutex_lock_interruptible+0x51/0x130 [i915] [ 137.522657] i915_gem_fault+0x20b/0x720 [i915] [ 137.522660] __do_fault+0x1e/0x80 [ 137.522662] __handle_mm_fault+0xa08/0xed0 [ 137.522664] handle_mm_fault+0x156/0x300 [ 137.522666] __do_page_fault+0x2c5/0x570 [ 137.522668] do_page_fault+0x28/0x250 [ 137.522671] page_fault+0x22/0x30 [ 137.522672] -> #2 (&mm->mmap_sem){++++}: [ 137.522677] __lock_acquire+0x1420/0x15e0 [ 137.522679] lock_acquire+0xb0/0x200 [ 137.522682] down_read+0x3e/0x70 [ 137.522699] __i915_gem_userptr_get_pages_worker+0x141/0x240 [i915] [ 137.522701] process_one_work+0x233/0x660 [ 137.522704] worker_thread+0x4e/0x3b0 [ 137.522706] kthread+0x152/0x190 [ 137.522708] ret_from_fork+0x27/0x40 [ 137.522710] -> #1 ((&work->work)){+.+.}: [ 137.522714] __lock_acquire+0x1420/0x15e0 [ 137.522717] lock_acquire+0xb0/0x200 [ 137.522719] process_one_work+0x206/0x660 [ 137.522721] worker_thread+0x4e/0x3b0 [ 137.522723] kthread+0x152/0x190 [ 137.522725] ret_from_fork+0x27/0x40 [ 137.522727] -> #0 ("i915-userptr-acquire"){+.+.}: [ 137.522731] check_prev_add+0x430/0x840 [ 137.522733] __lock_acquire+0x1420/0x15e0 [ 137.522735] lock_acquire+0xb0/0x200 [ 137.522738] flush_workqueue+0xb4/0x540 [ 137.522740] drain_workqueue+0xd4/0x1b0 [ 137.522742] destroy_workqueue+0x1c/0x200 [ 137.522758] i915_gem_cleanup_userptr+0x15/0x20 [i915] [ 137.522770] i915_gem_fini+0x5f/0xc0 [i915] [ 137.522782] i915_driver_unload+0x122/0x180 [i915] [ 137.522794] i915_pci_remove+0x19/0x30 [i915] [ 137.522797] pci_device_remove+0x39/0xb0 [ 137.522800] device_release_driver_internal+0x15d/0x220 [ 137.522803] driver_detach+0x40/0x80 [ 137.522805] bus_remove_driver+0x58/0xd0 [ 137.522807] driver_unregister+0x2c/0x40 [ 137.522809] pci_unregister_driver+0x36/0xb0 [ 137.522828] i915_exit+0x1a/0x8b [i915] [ 137.522831] SyS_delete_module+0x18c/0x1e0 [ 137.522834] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 137.522835] other info that might help us debug this: [ 137.522838] Chain exists of: "i915-userptr-acquire" --> &mm->mmap_sem --> &dev->struct_mutex [ 137.522844] Possible unsafe locking scenario: [ 137.522846] CPU0 CPU1 [ 137.522848] ---- ---- [ 137.522850] lock(&dev->struct_mutex); [ 137.522852] lock(&mm->mmap_sem); [ 137.522854] lock(&dev->struct_mutex); [ 137.522857] lock("i915-userptr-acquire"); [ 137.522859] *** DEADLOCK *** [ 137.522862] 3 locks held by drv_module_relo/1532: [ 137.522864] #0: (&dev->mutex){....}, at: [<ffffffff8161d47b>] device_release_driver_internal+0x2b/0x220 [ 137.522869] #1: (&dev->mutex){....}, at: [<ffffffff8161d489>] device_release_driver_internal+0x39/0x220 [ 137.522873] #2: (&dev->struct_mutex){+.+.}, at: [<ffffffffa014fb3f>] i915_gem_fini+0x3f/0xc0 [i915] [ 137.522888] stack backtrace: [ 137.522891] CPU: 0 PID: 1532 Comm: drv_module_relo Tainted: G U 4.14.0-rc4-CI-CI_DRM_3209+ #1 [ 137.522894] Hardware name: /NUC7i5BNB, BIOS BNKBL357.86A.0048.2017.0704.1415 07/04/2017 [ 137.522897] Call Trace: [ 137.522900] dump_stack+0x68/0x9f [ 137.522902] print_circular_bug+0x235/0x3c0 [ 137.522905] ? lockdep_init_map_crosslock+0x20/0x20 [ 137.522908] check_prev_add+0x430/0x840 [ 137.522919] ? i915_gem_fini+0x5f/0xc0 [i915] [ 137.522922] ? __kernel_text_address+0x12/0x40 [ 137.522925] ? __save_stack_trace+0x66/0xd0 [ 137.522928] __lock_acquire+0x1420/0x15e0 [ 137.522930] ? __lock_acquire+0x1420/0x15e0 [ 137.522933] ? lockdep_init_map_crosslock+0x20/0x20 [ 137.522936] ? __this_cpu_preempt_check+0x13/0x20 [ 137.522938] lock_acquire+0xb0/0x200 [ 137.522940] ? flush_workqueue+0x91/0x540 [ 137.522943] flush_workqueue+0xb4/0x540 [ 137.522945] ? flush_workqueue+0x91/0x540 [ 137.522948] ? __mutex_unlock_slowpath+0x43/0x2c0 [ 137.522951] ? trace_hardirqs_on_caller+0xe3/0x1b0 [ 137.522954] drain_workqueue+0xd4/0x1b0 [ 137.522956] ? drain_workqueue+0xd4/0x1b0 [ 137.522958] destroy_workqueue+0x1c/0x200 [ 137.522975] i915_gem_cleanup_userptr+0x15/0x20 [i915] [ 137.522987] i915_gem_fini+0x5f/0xc0 [i915] [ 137.523000] i915_driver_unload+0x122/0x180 [i915] [ 137.523015] i915_pci_remove+0x19/0x30 [i915] [ 137.523018] pci_device_remove+0x39/0xb0 [ 137.523021] device_release_driver_internal+0x15d/0x220 [ 137.523023] driver_detach+0x40/0x80 [ 137.523026] bus_remove_driver+0x58/0xd0 [ 137.523028] driver_unregister+0x2c/0x40 [ 137.523030] pci_unregister_driver+0x36/0xb0 [ 137.523049] i915_exit+0x1a/0x8b [i915] [ 137.523052] SyS_delete_module+0x18c/0x1e0 [ 137.523055] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 137.523057] RIP: 0033:0x7f7bd0609287 [ 137.523059] RSP: 002b:00007ffef694bc18 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 [ 137.523062] RAX: ffffffffffffffda RBX: ffffffff81493f33 RCX: 00007f7bd0609287 [ 137.523065] RDX: 0000000000000001 RSI: 0000000000000800 RDI: 0000564f999f9fc8 [ 137.523067] RBP: ffffc90005c4ff88 R08: 0000000000000000 R09: 0000000000000080 [ 137.523069] R10: 00007f7bd20ef8c0 R11: 0000000000000246 R12: 0000000000000000 [ 137.523072] R13: 00007ffef694be00 R14: 0000000000000000 R15: 0000000000000000 [ 137.523075] ? __this_cpu_preempt_check+0x13/0x20 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171011141857.14161-1-chris@chris-wilson.co.uk Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-10-12omapdrm: omapdss_hdmi_ops: add lost_hotplug opHans Verkuil
The CEC framework needs to know when the hotplug detect signal disappears, since that means the CEC physical address has to be invalidated (i.e. set to f.f.f.f). Add a lost_hotplug op that is called when the HPD signal goes away. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-10-12omapdrm: hdmi4: hook up the HDMI CEC supportHans Verkuil
Hook up the HDMI CEC support in the hdmi4 driver. It add the CEC irq handler, the CEC (un)init calls and tells the CEC implementation when the physical address changes. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-10-12omapdrm: hdmi4_cec: add OMAP4 HDMI CEC supportHans Verkuil
Add the source and header for the OMAP4 HDMI CEC support. This code is not yet hooked up, that will happen in the next patch. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-10-12omapdrm: hdmi4: refcount hdmi_power_on/off_coreHans Verkuil
The hdmi_power_on/off_core functions can be called multiple times: when the HPD changes and when the HDMI CEC support needs to power the HDMI core. So use a counter to know when to really power on or off the HDMI core. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-10-12omapdrm: hdmi4: move hdmi4_core_powerdown_disable to hdmi_power_on_core()Hans Verkuil
Call hdmi4_core_powerdown_disable() in hdmi_power_on_core() to power up the HDMI core (needed for CEC). The same call can now be dropped in hdmi4_configure(). Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-10-12omapdrm: hdmi4: prepare irq handling for HDMI CEC supportHans Verkuil
Pass struct omap_hdmi to the irq handler since it will need access to hdmi.core. Do not clear the IRQ_HDMI_CORE bit: that will be controlled by the HDMI CEC code. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-10-12omapdrm: hdmi4: make low-level functions availableHans Verkuil
Three low-level functions in hdmi4.c and hdmi4_core.c are made available for use by the OMAP4 CEC support. Renamed the prefix to hdmi4 since these are OMAP4 specific. These function deal with the HDMI core and are needed to power it up for use with CEC, even when the HPD is low. Background: even if the HPD is low it should still be possible to use CEC. Some displays will set the HPD low when they go into standby or when they switch to another input, but CEC is still available and able to wake up/change input for such a display. This is explicitly allowed by the CEC standard. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-10-12omapdrm: hdmi.h: extend hdmi_core_data with CEC fieldsHans Verkuil
Extend the hdmi_core_data struct with the additional fields needed for CEC. Also fix a simple typo in a comment. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-10-12omapdrm: encoder-tpd12s015: keep ls_oe_gpio highHans Verkuil
For OMAP4 CEC support the CEC pin should always be on. So keep ls_oe_gpio high all the time in order to support CEC. Background: even if the HPD is low it should still be possible to use CEC. Some displays will set the HPD low when they go into standby or when they switch to another input, but CEC is still available and able to wake up/change input for such a display. This is explicitly allowed by the CEC standard. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-10-12Merge tag 'drm-intel-next-2017-09-29' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next 2nd batch of v4.15 features: - lib/scatterlist updates, use for userptr allocations (Tvrtko) - Fixed point wrapper cleanup (Mahesh) - Gen9+ transition watermarks, watermark optimization and fixes (Mahesh) - Display IPC (Isochronous Priority Control) support (Mahesh) - GEM workaround fixes (Oscar) - GVT: PCI config sanitize series (Changbin) - GVT: Workload submission error handling series (Fred) - PSR fixes and refactoring (Rodrigo) - HWSP based optimizations (Chris) - Private PAT management (Zhi) - IRQ handling fixes and refactoring (Ville) - Module parameter refactoring and variable name clash fix (Michal) - Execlist refactoring, incomplete request unwinding on reset (Chris) - GuC scheduling improvements (Michal) - OA updates (Lionel) - Coffeelake out of alpha support (Rodrigo) - seqno fixes (Chris) - Execlist refactoring (Mika) - DP and DP MST cleanups (Dhinakaran) - Cannonlake slice/sublice config (Ben) - Numerous fixes all around (Everyone) * tag 'drm-intel-next-2017-09-29' of git://anongit.freedesktop.org/drm/drm-intel: (168 commits) drm/i915: Update DRIVER_DATE to 20170929 drm/i915: Use memset64() to prefill the GTT page drm/i915: Also discard second CRC on gen8+ platforms. drm/i915/psr: Set frames before SU entry for psr2 drm/dp: Add defines for latency in sink drm/i915: Allow optimized platform checks drm/i915: Avoid using dev_priv->info.gen directly. i915: Use %pS printk format for direct addresses drm/i915/execlists: Notify context-out for lost requests drm/i915/cnl: Add support slice/subslice/eu configs drm/i915: Compact device info access by a small re-ordering drm/i915: Add IS_PLATFORM macro drm/i915/selftests: Try to recover from a wedged GPU during reset tests drm/i915/huc: Reorganize HuC authentication drm/i915: Fix default values of some modparams drm/i915: Extend I915_PARAMS_FOR_EACH with default member value drm/i915: Make I915_PARAMS_FOR_EACH macro more flexible drm/i915: Enable scanline read based on frame timestamps drm/i915/execlists: Microoptimise execlists_cancel_port_request() drm/i915: Don't rmw PIPESTAT enable bits ...
2017-10-12drm: Pass struct drm_file * to __drm_mode_object_find [v2]Keith Packard
This will allow __drm_mode_object_file to be extended to perform access control checks based on the file in use. v2: Also fix up vboxvideo driver in staging [airlied: merging early as this is an API change] Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2017-10-11drm/i915/dp: limit sink rates based on rateJani Nikula
Get rid of redundant intel_dp_num_rates(). We can simply look at the rate and limit based on that. Cc: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: <manasi.d.navare@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171009092959.29021-3-jani.nikula@intel.com
2017-10-11drm/i915/dp: centralize max source rate conditions moreJani Nikula
Turn intel_dp_source_supports_hbr2() into a simple helper to query the pre-filled source rates array, and move the conditions about which platforms support which rates to the single point of truth in intel_dp_set_source_rates(). This also reduces the code paths you have to think about in the source rates initialization in intel_dp_set_source_rates(), making it easier to grasp. Cc: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171009092959.29021-2-jani.nikula@intel.com
2017-10-11drm/i915: Allow PCH platforms fall back to BIOS LVDS modeVille Syrjälä
With intel_encoder_current_mode() using the normal state readout code it actually works on PCH platforms as well. So let's nuke the PCH check from intel_lvds_init(). I suppose there aren't any machines that actually need this, but at least we get to eliminate a few lines of code, and one FIXME. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171009161951.22420-2-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2017-10-11drm/i915: Reuse normal state readout for LVDS/DVO fixed modeVille Syrjälä
Reuse the normal state readout code to get the fixed mode for LVDS/DVO encoders. This removes some partially duplicated state readout code from LVDS/DVO encoders. The duplicated code wasn't actually even populating the negative h/vsync flags, leading to possible state checker complaints. The normal readout code populates that stuff fully. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171009161951.22420-1-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
2017-10-11drm/i915: Use rcu instead of stop_machine in set_wedgedDaniel Vetter
stop_machine is not really a locking primitive we should use, except when the hw folks tell us the hw is broken and that's the only way to work around it. This patch tries to address the locking abuse of stop_machine() from commit 20e4933c478a1ca694b38fa4ac44d99e659941f5 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Tue Nov 22 14:41:21 2016 +0000 drm/i915: Stop the machine as we install the wedged submit_request handler Chris said parts of the reasons for going with stop_machine() was that it's no overhead for the fast-path. But these callbacks use irqsave spinlocks and do a bunch of MMIO, and rcu_read_lock is _real_ fast. To stay as close as possible to the stop_machine semantics we first update all the submit function pointers to the nop handler, then call synchronize_rcu() to make sure no new requests can be submitted. This should give us exactly the huge barrier we want. I pondered whether we should annotate engine->submit_request as __rcu and use rcu_assign_pointer and rcu_dereference on it. But the reason behind those is to make sure the compiler/cpu barriers are there for when you have an actual data structure you point at, to make sure all the writes are seen correctly on the read side. But we just have a function pointer, and .text isn't changed, so no need for these barriers and hence no need for annotations. Unfortunately there's a complication with the call to intel_engine_init_global_seqno: - Without stop_machine we must hold the corresponding spinlock. - Without stop_machine we must ensure that all requests are marked as having failed with dma_fence_set_error() before we call it. That means we need to split the nop request submission into two phases, both synchronized with rcu: 1. Only stop submitting the requests to hw and mark them as failed. 2. After all pending requests in the scheduler/ring are suitably marked up as failed and we can force complete them all, also force complete by calling intel_engine_init_global_seqno(). This should fix the followwing lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 4.14.0-rc3-CI-CI_DRM_3179+ #1 Tainted: G U ------------------------------------------------------ kworker/3:4/562 is trying to acquire lock: (cpu_hotplug_lock.rw_sem){++++}, at: [<ffffffff8113d4bc>] stop_machine+0x1c/0x40 but task is already holding lock: (&dev->struct_mutex){+.+.}, at: [<ffffffffa0136588>] i915_reset_device+0x1e8/0x260 [i915] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #6 (&dev->struct_mutex){+.+.}: __lock_acquire+0x1420/0x15e0 lock_acquire+0xb0/0x200 __mutex_lock+0x86/0x9b0 mutex_lock_interruptible_nested+0x1b/0x20 i915_mutex_lock_interruptible+0x51/0x130 [i915] i915_gem_fault+0x209/0x650 [i915] __do_fault+0x1e/0x80 __handle_mm_fault+0xa08/0xed0 handle_mm_fault+0x156/0x300 __do_page_fault+0x2c5/0x570 do_page_fault+0x28/0x250 page_fault+0x22/0x30 -> #5 (&mm->mmap_sem){++++}: __lock_acquire+0x1420/0x15e0 lock_acquire+0xb0/0x200 __might_fault+0x68/0x90 _copy_to_user+0x23/0x70 filldir+0xa5/0x120 dcache_readdir+0xf9/0x170 iterate_dir+0x69/0x1a0 SyS_getdents+0xa5/0x140 entry_SYSCALL_64_fastpath+0x1c/0xb1 -> #4 (&sb->s_type->i_mutex_key#5){++++}: down_write+0x3b/0x70 handle_create+0xcb/0x1e0 devtmpfsd+0x139/0x180 kthread+0x152/0x190 ret_from_fork+0x27/0x40 -> #3 ((complete)&req.done){+.+.}: __lock_acquire+0x1420/0x15e0 lock_acquire+0xb0/0x200 wait_for_common+0x58/0x210 wait_for_completion+0x1d/0x20 devtmpfs_create_node+0x13d/0x160 device_add+0x5eb/0x620 device_create_groups_vargs+0xe0/0xf0 device_create+0x3a/0x40 msr_device_create+0x2b/0x40 cpuhp_invoke_callback+0xc9/0xbf0 cpuhp_thread_fun+0x17b/0x240 smpboot_thread_fn+0x18a/0x280 kthread+0x152/0x190 ret_from_fork+0x27/0x40 -> #2 (cpuhp_state-up){+.+.}: __lock_acquire+0x1420/0x15e0 lock_acquire+0xb0/0x200 cpuhp_issue_call+0x133/0x1c0 __cpuhp_setup_state_cpuslocked+0x139/0x2a0 __cpuhp_setup_state+0x46/0x60 page_writeback_init+0x43/0x67 pagecache_init+0x3d/0x42 start_kernel+0x3a8/0x3fc x86_64_start_reservations+0x2a/0x2c x86_64_start_kernel+0x6d/0x70 verify_cpu+0x0/0xfb -> #1 (cpuhp_state_mutex){+.+.}: __lock_acquire+0x1420/0x15e0 lock_acquire+0xb0/0x200 __mutex_lock+0x86/0x9b0 mutex_lock_nested+0x1b/0x20 __cpuhp_setup_state_cpuslocked+0x53/0x2a0 __cpuhp_setup_state+0x46/0x60 page_alloc_init+0x28/0x30 start_kernel+0x145/0x3fc x86_64_start_reservations+0x2a/0x2c x86_64_start_kernel+0x6d/0x70 verify_cpu+0x0/0xfb -> #0 (cpu_hotplug_lock.rw_sem){++++}: check_prev_add+0x430/0x840 __lock_acquire+0x1420/0x15e0 lock_acquire+0xb0/0x200 cpus_read_lock+0x3d/0xb0 stop_machine+0x1c/0x40 i915_gem_set_wedged+0x1a/0x20 [i915] i915_reset+0xb9/0x230 [i915] i915_reset_device+0x1f6/0x260 [i915] i915_handle_error+0x2d8/0x430 [i915] hangcheck_declare_hang+0xd3/0xf0 [i915] i915_hangcheck_elapsed+0x262/0x2d0 [i915] process_one_work+0x233/0x660 worker_thread+0x4e/0x3b0 kthread+0x152/0x190 ret_from_fork+0x27/0x40 other info that might help us debug this: Chain exists of: cpu_hotplug_lock.rw_sem --> &mm->mmap_sem --> &dev->struct_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&dev->struct_mutex); lock(&mm->mmap_sem); lock(&dev->struct_mutex); lock(cpu_hotplug_lock.rw_sem); *** DEADLOCK *** 3 locks held by kworker/3:4/562: #0: ("events_long"){+.+.}, at: [<ffffffff8109c64a>] process_one_work+0x1aa/0x660 #1: ((&(&i915->gpu_error.hangcheck_work)->work)){+.+.}, at: [<ffffffff8109c64a>] process_one_work+0x1aa/0x660 #2: (&dev->struct_mutex){+.+.}, at: [<ffffffffa0136588>] i915_reset_device+0x1e8/0x260 [i915] stack backtrace: CPU: 3 PID: 562 Comm: kworker/3:4 Tainted: G U 4.14.0-rc3-CI-CI_DRM_3179+ #1 Hardware name: /NUC7i5BNB, BIOS BNKBL357.86A.0048.2017.0704.1415 07/04/2017 Workqueue: events_long i915_hangcheck_elapsed [i915] Call Trace: dump_stack+0x68/0x9f print_circular_bug+0x235/0x3c0 ? lockdep_init_map_crosslock+0x20/0x20 check_prev_add+0x430/0x840 ? irq_work_queue+0x86/0xe0 ? wake_up_klogd+0x53/0x70 __lock_acquire+0x1420/0x15e0 ? __lock_acquire+0x1420/0x15e0 ? lockdep_init_map_crosslock+0x20/0x20 lock_acquire+0xb0/0x200 ? stop_machine+0x1c/0x40 ? i915_gem_object_truncate+0x50/0x50 [i915] cpus_read_lock+0x3d/0xb0 ? stop_machine+0x1c/0x40 stop_machine+0x1c/0x40 i915_gem_set_wedged+0x1a/0x20 [i915] i915_reset+0xb9/0x230 [i915] i915_reset_device+0x1f6/0x260 [i915] ? gen8_gt_irq_ack+0x170/0x170 [i915] ? work_on_cpu_safe+0x60/0x60 i915_handle_error+0x2d8/0x430 [i915] ? vsnprintf+0xd1/0x4b0 ? scnprintf+0x3a/0x70 hangcheck_declare_hang+0xd3/0xf0 [i915] ? intel_runtime_pm_put+0x56/0xa0 [i915] i915_hangcheck_elapsed+0x262/0x2d0 [i915] process_one_work+0x233/0x660 worker_thread+0x4e/0x3b0 kthread+0x152/0x190 ? process_one_work+0x660/0x660 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x27/0x40 Setting dangerous option reset - tainting kernel i915 0000:00:02.0: Resetting chip after gpu hang Setting dangerous option reset - tainting kernel i915 0000:00:02.0: Resetting chip after gpu hang v2: Have 1 global synchronize_rcu() barrier across all engines, and improve commit message. v3: We need to protect the seqno update with the timeline spinlock (in set_wedged) to avoid racing with other updates of the seqno, like we already do in nop_submit_request (Chris). v4: Use two-phase sequence to plug the race Chris spotted where we can complete requests before they're marked up with -EIO. v5: Review from Chris: - simplify nop_submit_request. - Add comment to rcu_read_lock section. - Align comments with the new style. v6: Remove unused variable to appease CI. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102886 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103096 Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marta Lofstedt <marta.lofstedt@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171011091019.1425-1-daniel.vetter@ffwll.ch
2017-10-11drm/dp: WARN about invalid/unknown link rates and bw codesJani Nikula
Falling back to the lowest value is likely the only thing we can do, but doing it silently seems like a bad thing to do. Catch it early and make loud noises. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171009092959.29021-1-jani.nikula@intel.com
2017-10-11Merge tag 'regmap-poll-field' of ↵Daniel Vetter
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap into drm-misc-next regmap: Add field polling macro Requested by Maxime Ripard to make sun4i compile again (next time the other way round is better). Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171004104732.jkps4ufekfizcrkz@sirena.co.uk
2017-10-11drm/msm/mdp5: remove less than 0 comparison for unsigned valueAishwarya Pant
pipe is an unsigned int and less than zero comparison for unsigned values is always false. Detected using the following cocci script: @@ unsigned int i; @@ * i < 0 Signed-off-by: Aishwarya Pant <aishpant@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171010184207.iv3dinrtwvbv7fei@aishwarya
2017-10-11drm/bridge/sii8620: add remote control supportMaciej Purski
MHL specification defines Remote Control Protocol(RCP) to send input events between MHL devices. The driver now recognizes RCP messages and reacts to them by reporting key events to input subsystem, allowing a user to control a device using TV remote control. Signed-off-by: Maciej Purski <m.purski@samsung.com> Acked-by: Sean Young <sean@mess.org> Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1503565087-19730-1-git-send-email-m.purski@samsung.com
2017-10-11drm/i915: Introduce separate status variable for RC6 and LLC ring frequency ↵Sagar Arun Kamble
setup Defined new struct intel_rc6 to hold RC6 specific state and intel_ring_pstate to hold ring specific state. v2: s/intel_ring_pstate/intel_llc_pstate. Removed checks from autoenable_* functions. (Chris) Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/1507360055-19948-13-git-send-email-sagar.a.kamble@intel.com Acked-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171010213010.7415-12-chris@chris-wilson.co.uk
2017-10-11drm/i915: Create generic functions to control RC6, RPSSagar Arun Kamble
Prepared generic functions intel_enable_rc6, intel_disable_rc6, intel_enable_rps and intel_disable_rps functions to setup RC6/RPS based on platforms. v2: Make intel_enable/disable_rc6/rps static. (Chris) v3: Added lockdep_assert_held(dev_priv->pcu_lock) in new generic functions. (Chris) Removed WARN_ON(&dev_priv->pcu_lock) from lower level functions as generic function now has lockdep_assert. Rebase. Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/1507360055-19948-12-git-send-email-sagar.a.kamble@intel.com Acked-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171010213010.7415-11-chris@chris-wilson.co.uk
2017-10-11drm/i915: Create generic function to setup LLC ring frequency tableSagar Arun Kamble
Prepared intel_update_ring_freq function to setup ring frequency for applicable platforms determined by macro HAS_LLC. v2: Replaced NEEDS_RING_FREQ_UPDATE with HAS_LLC macro. (Chris) Added check while calling from intel_enable_gt_powersave. v3: s/intel_update_ring_freq/intel_enable_llc_pstate and created new placeholder function intel_disable_llc_pstate. (Chris) Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/1507360055-19948-11-git-send-email-sagar.a.kamble@intel.com Acked-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171010213010.7415-10-chris@chris-wilson.co.uk
2017-10-11drm/i915: Rename intel_enable_rc6 to intel_rc6_enabledSagar Arun Kamble
This function gives the status of RC6, whether disabled or if enabled then which state. intel_enable_rc6 will be used for enabling RC6 in the next patch. v2: Rebase. v3: Rebase. Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Imre Deak <imre.deak@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com> #1 Reviewed-by: Ewelina Musial <ewelina.musial@intel.com> #1 Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/1507360055-19948-10-git-send-email-sagar.a.kamble@intel.com Acked-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171010213010.7415-9-chris@chris-wilson.co.uk
2017-10-11drm/i915: Name structure in dev_priv that contains RPS/RC6 state as "gt_pm"Sagar Arun Kamble
Prepared substructure rps for RPS related state. autoenable_work is used for RC6 too hence it is defined outside rps structure. As we do this lot many functions are refactored to use intel_rps *rps to access rps related members. Hence renamed intel_rps_client pointer variables to rps_client in various functions. v2: Rebase. v3: s/pm/gt_pm (Chris) Refactored access to rps structure by declaring struct intel_rps * in many functions. Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Imre Deak <imre.deak@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com> #1 Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/1507360055-19948-9-git-send-email-sagar.a.kamble@intel.com Acked-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171010213010.7415-8-chris@chris-wilson.co.uk
2017-10-11drm/i915: Move rps.hw_lock to dev_priv and s/hw_lock/pcu_lockSagar Arun Kamble
In order to separate GT PM related functionality into new structure we are updating rps structure. hw_lock in it is used for display related PCU communication too hence move it to dev_priv. Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/1507360055-19948-8-git-send-email-sagar.a.kamble@intel.com Acked-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171010213010.7415-7-chris@chris-wilson.co.uk
2017-10-11drm/i915: Name i915_runtime_pm structure in dev_priv as "runtime_pm"Sagar Arun Kamble
We were using dev_priv->pm for runtime power management related state. This patch renames it to "runtime_pm" which looks more apt. v2: s/rpm/runtime_pm (Chris) Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com> #1 Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/1507360055-19948-7-git-send-email-sagar.a.kamble@intel.com Acked-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171010213010.7415-6-chris@chris-wilson.co.uk
2017-10-11drm/i915: Separate RPS and RC6 handling for CHVSagar Arun Kamble
This patch separates enable/disable of RC6 and RPS for CHV. v2: Fixed comment. Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/1507360055-19948-6-git-send-email-sagar.a.kamble@intel.com Acked-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171010213010.7415-5-chris@chris-wilson.co.uk
2017-10-11drm/i915: Separate RPS and RC6 handling for VLVSagar Arun Kamble
This patch separates enable/disable of RC6 and RPS for VLV. v2: Removed unnecessary comments about forcewakes while enabling RC6/RPS. Added changes to output turbo control status for VLV in i915_frequency_info. Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/1507360055-19948-5-git-send-email-sagar.a.kamble@intel.com Acked-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171010213010.7415-4-chris@chris-wilson.co.uk
2017-10-11drm/i915: Separate RPS and RC6 handling for BDWSagar Arun Kamble
This patch separates RC6 and RPS enabling for BDW. RC6/RPS Disabling are handled through gen6 functions. PM Programming guide recommends a sequence within forcewakes to configure RC6, RPS and ring frequencies in sequence. With this patch the order is still maintained. v2: Update sequence numbers in RC6 programming and comment about intent of reset_rps during gen8_enable_rps. (Radoslaw) v3: Rebase. Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/1507360055-19948-4-git-send-email-sagar.a.kamble@intel.com Acked-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171010213010.7415-3-chris@chris-wilson.co.uk
2017-10-11drm/i915: Remove superfluous IS_BDW checks and non-BDW changes from ↵Sagar Arun Kamble
gen8_enable_rps This patch removes all IS_BROADWELL checks and non-BDW changes from gen8_enable_rps as it is called only for BROADWELL. Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/1507360055-19948-3-git-send-email-sagar.a.kamble@intel.com Acked-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171010213010.7415-2-chris@chris-wilson.co.uk
2017-10-11drm/i915: Separate RPS and RC6 handling for gen6+Sagar Arun Kamble
This patch separates enable/disable of RC6 and RPS for gen6+ platforms prior to VLV. v2: Fixed checkpatch issue. (Sagar) Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com> #1 Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/1507360055-19948-2-git-send-email-sagar.a.kamble@intel.com Acked-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171010213010.7415-1-chris@chris-wilson.co.uk
generated by cgit (git 2.34.1) at 2025-07-16 19:48:31 +0000