summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-11-05net: bpfilter: fix iptables failure if bpfilter_umh is disabledTaehee Yoo
When iptables command is executed, ip_{set/get}sockopt() try to upload bpfilter.ko if bpfilter is enabled. if it couldn't find bpfilter.ko, command is failed. bpfilter.ko is generated if CONFIG_BPFILTER_UMH is enabled. ip_{set/get}sockopt() only checks CONFIG_BPFILTER. So that if CONFIG_BPFILTER is enabled and CONFIG_BPFILTER_UMH is disabled, iptables command is always failed. test config: CONFIG_BPFILTER=y # CONFIG_BPFILTER_UMH is not set test command: %iptables -L iptables: No chain/target/match by that name. Fixes: d2ba09c17a06 ("net: add skeleton of bpfilter kernel module") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-05sock_diag: fix autoloading of the raw_diag moduleAndrei Vagin
IPPROTO_RAW isn't registred as an inet protocol, so inet_protos[protocol] is always NULL for it. Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Xin Long <lucien.xin@gmail.com> Fixes: bf2ae2e4bf93 ("sock_diag: request _diag module only when the family or proto has been registered") Signed-off-by: Andrei Vagin <avagin@gmail.com> Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-05net: core: netpoll: Enable netconsole IPv6 link local addressMatwey V. Kornilov
There is no reason to discard using source link local address when remote netconsole IPv6 address is set to be link local one. The patch allows administrators to use IPv6 netconsole without explicitly configuring source address: netconsole=@/,@fe80::5054:ff:fe2f:6012/ Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-05ipv6: properly check return value in inet6_dump_all()Alexey Kodanev
Make sure we call fib6_dump_end() if it happens that skb->len is zero. rtnl_dump_all() can reset cb->args on the next loop iteration there. Fixes: 08e814c9e8eb ("net/ipv6: Bail early if user only wants cloned entries") Fixes: ae677bbb4441 ("net: Don't return invalid table id error when dumping all families") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-05rtnetlink: restore handling of dumpit return value in rtnl_dump_all()Alexey Kodanev
For non-zero return from dumpit() we should break the loop in rtnl_dump_all() and return the result. Otherwise, e.g., we could get the memory leak in inet6_dump_fib() [1]. The pointer to the allocated struct fib6_walker there (saved in cb->args) can be lost, reset on the next iteration. Fix it by partially restoring the previous behavior before commit c63586dc9b3e ("net: rtnl_dump_all needs to propagate error from dumpit function"). The returned error from dumpit() is still passed further. [1]: unreferenced object 0xffff88001322a200 (size 96): comm "sshd", pid 1484, jiffies 4296032768 (age 1432.542s) hex dump (first 32 bytes): 00 01 00 00 00 00 ad de 00 02 00 00 00 00 ad de ................ 18 09 41 36 00 88 ff ff 18 09 41 36 00 88 ff ff ..A6......A6.... backtrace: [<0000000095846b39>] kmem_cache_alloc_trace+0x151/0x220 [<000000007d12709f>] inet6_dump_fib+0x68d/0x940 [<000000002775a316>] rtnl_dump_all+0x1d9/0x2d0 [<00000000d7cd302b>] netlink_dump+0x945/0x11a0 [<000000002f43485f>] __netlink_dump_start+0x55d/0x800 [<00000000f76bbeec>] rtnetlink_rcv_msg+0x4fa/0xa00 [<000000009b5761f3>] netlink_rcv_skb+0x29c/0x420 [<0000000087a1dae1>] rtnetlink_rcv+0x15/0x20 [<00000000691b703b>] netlink_unicast+0x4e3/0x6c0 [<00000000b5be0204>] netlink_sendmsg+0x7f2/0xba0 [<0000000096d2aa60>] sock_sendmsg+0xba/0xf0 [<000000008c1b786f>] __sys_sendto+0x1e4/0x330 [<0000000019587b3f>] __x64_sys_sendto+0xe1/0x1a0 [<00000000071f4d56>] do_syscall_64+0x9f/0x300 [<000000002737577f>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [<0000000057587684>] 0xffffffffffffffff Fixes: c63586dc9b3e ("net: rtnl_dump_all needs to propagate error from dumpit function") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-05net/ipv6: Move anycast init/cleanup functions out of CONFIG_PROC_FSJeff Barnhill
Move the anycast.c init and cleanup functions which were inadvertently added inside the CONFIG_PROC_FS definition. Fixes: 2384d02520ff ("net/ipv6: Add anycast addresses to a global hashtable") Signed-off-by: Jeff Barnhill <0xeffeff@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-05compiler: remove __no_sanitize_address_or_inline againMartin Schwidefsky
The __no_sanitize_address_or_inline and __no_kasan_or_inline defines are almost identical. The only difference is that __no_kasan_or_inline does not have the 'notrace' attribute. To be able to replace __no_sanitize_address_or_inline with the older definition, add 'notrace' to __no_kasan_or_inline and change to two users of __no_sanitize_address_or_inline in the s390 code. The 'notrace' option is necessary for e.g. the __load_psw_mask function in arch/s390/include/asm/processor.h. Without the option it is possible to trace __load_psw_mask which leads to kernel stack overflow. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Pointed-out-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-05tracing/kprobes: Fix strpbrk() argument orderMasami Hiramatsu
Fix strpbrk()'s argument order, it must pass acceptable string in 2nd argument. Note that this can cause a kernel panic where it recovers backup character to code->data. Link: http://lkml.kernel.org/r/154108256792.2604.1816052586385217811.stgit@devbox Fixes: a6682814f371 ("tracing/kprobes: Allow kprobe-events to record module symbol") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-11-04bonding/802.3ad: fix link_failure_count trackingJarod Wilson
Commit 4d2c0cda07448ea6980f00102dc3964eb25e241c set slave->link to BOND_LINK_DOWN for 802.3ad bonds whenever invalid speed/duplex values were read, to fix a problem with slaves getting into weird states, but in the process, broke tracking of link failures, as going straight to BOND_LINK_DOWN when a link is indeed down (cable pulled, switch rebooted) means we broke out of bond_miimon_inspect()'s BOND_LINK_DOWN case because !link_state was already true, we never incremented commit, and never got a chance to call bond_miimon_commit(), where slave->link_failure_count would be incremented. I believe the simple fix here is to mark the slave as BOND_LINK_FAIL, and let bond_miimon_inspect() transition the link from _FAIL to either _UP or _DOWN, and in the latter case, we now get proper incrementing of link_failure_count again. Fixes: 4d2c0cda0744 ("bonding: speed/duplex update at NETDEV_UP event") CC: Mahesh Bandewar <maheshb@google.com> CC: David S. Miller <davem@davemloft.net> CC: netdev@vger.kernel.org CC: stable@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-04net: phy: realtek: fix RTL8201F sysfs nameHolger Hoffstätte
Since 4.19 the following error in sysfs has appeared when using the r8169 NIC driver: $cd /sys/module/realtek/drivers $ls -l ls: cannot access 'mdio_bus:RTL8201F 10/100Mbps Ethernet': No such file or directory [..garbled dir entries follow..] Apparently the forward slash in "10/100Mbps Ethernet" is interpreted as directory separator that leads nowhere, and was introduced in commit 513588dd44b ("net: phy: realtek: add RTL8201F phy-id and functions"). Fix this by removing the offending slash in the driver name. Other drivers in net/phy seem to have the same problem, but I cannot test/verify them. Fixes: 513588dd44b ("net: phy: realtek: add RTL8201F phy-id and functions") Signed-off-by: Holger Hoffstätte <holger@applied-asynchrony.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-04Linux 4.20-rc1v4.20-rc1Linus Torvalds
2018-11-04Merge tag 'tags/upstream-4.20-rc1' of git://git.infradead.org/linux-ubifsLinus Torvalds
Pull UBIFS updates from Richard Weinberger: - Full filesystem authentication feature, UBIFS is now able to have the whole filesystem structure authenticated plus user data encrypted and authenticated. - Minor cleanups * tag 'tags/upstream-4.20-rc1' of git://git.infradead.org/linux-ubifs: (26 commits) ubifs: Remove unneeded semicolon Documentation: ubifs: Add authentication whitepaper ubifs: Enable authentication support ubifs: Do not update inode size in-place in authenticated mode ubifs: Add hashes and HMACs to default filesystem ubifs: authentication: Authenticate super block node ubifs: Create hash for default LPT ubfis: authentication: Authenticate master node ubifs: authentication: Authenticate LPT ubifs: Authenticate replayed journal ubifs: Add auth nodes to garbage collector journal head ubifs: Add authentication nodes to journal ubifs: authentication: Add hashes to index nodes ubifs: Add hashes to the tree node cache ubifs: Create functions to embed a HMAC in a node ubifs: Add helper functions for authentication support ubifs: Add separate functions to init/crc a node ubifs: Format changes for authentication support ubifs: Store read superblock node ubifs: Drop write_node ...
2018-11-04Merge tag 'nfs-for-4.20-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: Bugfix: - Fix build issues on architectures that don't provide 64-bit cmpxchg Cleanups: - Fix a spelling mistake" * tag 'nfs-for-4.20-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: fix spelling mistake, EACCESS -> EACCES SUNRPC: Use atomic(64)_t for seq_send(64)
2018-11-04Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull more timer updates from Thomas Gleixner: "A set of commits for the new C-SKY architecture timers" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: dt-bindings: timer: gx6605s SOC timer clocksource/drivers/c-sky: Add gx6605s SOC system timer dt-bindings: timer: C-SKY Multi-processor timer clocksource/drivers/c-sky: Add C-SKY SMP timer
2018-11-04Merge tag 'ntb-4.20' of git://github.com/jonmason/ntbLinus Torvalds
Pull NTB updates from Jon Mason: "Fairly minor changes and bug fixes: NTB IDT thermal changes and hook into hwmon, ntb_netdev clean-up of private struct, and a few bug fixes" * tag 'ntb-4.20' of git://github.com/jonmason/ntb: ntb: idt: Alter the driver info comments ntb: idt: Discard temperature sensor IRQ handler ntb: idt: Add basic hwmon sysfs interface ntb: idt: Alter temperature read method ntb_netdev: Simplify remove with client device drvdata NTB: transport: Try harder to alloc an aligned MW buffer ntb: ntb_transport: Mark expected switch fall-throughs ntb: idt: Set PCIe bus address to BARLIMITx NTB: ntb_hw_idt: replace IS_ERR_OR_NULL with regular NULL checks ntb: intel: fix return value for ndev_vec_mask() ntb_netdev: fix sleep time mismatch
2018-11-03sctp: define SCTP_SS_DEFAULT for Stream schedulersXin Long
According to rfc8260#section-4.3.2, SCTP_SS_DEFAULT is required to defined as SCTP_SS_FCFS or SCTP_SS_RR. SCTP_SS_FCFS is used for SCTP_SS_DEFAULT's value in this patch. Fixes: 5bbbbe32a431 ("sctp: introduce stream scheduler foundations") Reported-by: Jianwen Ji <jiji@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03sctp: fix strchange_flags name for Stream Change EventXin Long
As defined in rfc6525#section-6.1.3, SCTP_STREAM_CHANGE_DENIED and SCTP_STREAM_CHANGE_FAILED should be used instead of SCTP_ASSOC_CHANGE_DENIED and SCTP_ASSOC_CHANGE_FAILED. To keep the compatibility, fix it by adding two macros. Fixes: b444153fb5a6 ("sctp: add support for generating add stream change event notification") Reported-by: Jianwen Ji <jiji@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2018-11-03 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix BPF prog kallsyms and bpf_prog_get_info_by_fd() jited address export to not use page start but actual start instead to work correctly with profiling e.g. finding hot instructions from stack traces. Also fix latter with regards to dumping address and jited len for !multi prog, from Song. 2) Fix bpf_prog_get_info_by_fd() for !root to zero info.nr_jited_func_lens instead of leaving the user provided length, from Daniel. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03mlxsw: spectrum: Fix IP2ME CPU policer configurationShalom Toledo
The CPU policer used to police packets being trapped via a local route (IP2ME) was incorrectly configured to police based on bytes per second instead of packets per second. Change the policer to police based on packets per second and avoid packet loss under certain circumstances. Fixes: 9148e7cf73ce ("mlxsw: spectrum: Add policers for trap groups") Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03openvswitch: fix linking without CONFIG_NF_CONNTRACK_LABELSArnd Bergmann
When CONFIG_CC_OPTIMIZE_FOR_DEBUGGING is enabled, the compiler fails to optimize out a dead code path, which leads to a link failure: net/openvswitch/conntrack.o: In function `ovs_ct_set_labels': conntrack.c:(.text+0x2e60): undefined reference to `nf_connlabels_replace' In this configuration, we can take a shortcut, and completely remove the contrack label code. This may also help the regular optimization. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03qed: fix link config error handlingArnd Bergmann
gcc-8 notices that qed_mcp_get_transceiver_data() may fail to return a result to the caller: drivers/net/ethernet/qlogic/qed/qed_mcp.c: In function 'qed_mcp_trans_speed_mask': drivers/net/ethernet/qlogic/qed/qed_mcp.c:1955:2: error: 'transceiver_type' may be used uninitialized in this function [-Werror=maybe-uninitialized] When an error is returned by qed_mcp_get_transceiver_data(), we should propagate that to the caller of qed_mcp_trans_speed_mask() rather than continuing with uninitialized data. Fixes: c56a8be7e7aa ("qed: Add supported link and advertise link to display in ethtool.") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "A memory (under-)allocation fix and a comment fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/topology: Fix off by one bug sched/rt: Update comment in pick_next_task_rt()
2018-11-03Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "A number of fixes and some late updates: - make in_compat_syscall() behavior on x86-32 similar to other platforms, this touches a number of generic files but is not intended to impact non-x86 platforms. - objtool fixes - PAT preemption fix - paravirt fixes/cleanups - cpufeatures updates for new instructions - earlyprintk quirk - make microcode version in sysfs world-readable (it is already world-readable in procfs) - minor cleanups and fixes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: compat: Cleanup in_compat_syscall() callers x86/compat: Adjust in_compat_syscall() to generic code under !COMPAT objtool: Support GCC 9 cold subfunction naming scheme x86/numa_emulation: Fix uniform-split numa emulation x86/paravirt: Remove unused _paravirt_ident_32 x86/mm/pat: Disable preemption around __flush_tlb_all() x86/paravirt: Remove GPL from pv_ops export x86/traps: Use format string with panic() call x86: Clean up 'sizeof x' => 'sizeof(x)' x86/cpufeatures: Enumerate MOVDIR64B instruction x86/cpufeatures: Enumerate MOVDIRI instruction x86/earlyprintk: Add a force option for pciserial device objtool: Support per-function rodata sections x86/microcode: Make revision and processor flags world-readable
2018-11-03Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates and fixes from Ingo Molnar: "These are almost all tooling updates: 'perf top', 'perf trace' and 'perf script' fixes and updates, an UAPI header sync with the merge window versions, license marker updates, much improved Sparc support from David Miller, and a number of fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (66 commits) perf intel-pt/bts: Calculate cpumode for synthesized samples perf intel-pt: Insert callchain context into synthesized callchains perf tools: Don't clone maps from parent when synthesizing forks perf top: Start display thread earlier tools headers uapi: Update linux/if_link.h header copy tools headers uapi: Update linux/netlink.h header copy tools headers: Sync the various kvm.h header copies tools include uapi: Update linux/mmap.h copy perf trace beauty: Use the mmap flags table generated from headers perf beauty: Wire up the mmap flags table generator to the Makefile perf beauty: Add a generator for MAP_ mmap's flag constants tools include uapi: Update asound.h copy tools arch uapi: Update asm-generic/unistd.h and arm64 unistd.h copies tools include uapi: Update linux/fs.h copy perf callchain: Honour the ordering of PERF_CONTEXT_{USER,KERNEL,etc} perf cs-etm: Correct CPU mode for samples perf unwind: Take pgoff into account when reporting elf to libdwfl perf top: Do not use overwrite mode by default perf top: Allow disabling the overwrite mode perf trace: Beautify mount's first pathname arg ...
2018-11-03Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Ingo Molnar: "An irqchip driver fix and a memory (over-)allocation fix" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/irq-mvebu-sei: Fix a NULL vs IS_ERR() bug in probe function irq/matrix: Fix memory overallocation
2018-11-04sched/topology: Fix off by one bugPeter Zijlstra
With the addition of the NUMA identity level, we increased @level by one and will run off the end of the array in the distance sort loop. Fixed: 051f3ca02e46 ("sched/topology: Introduce NUMA identity node sched domain") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-11-03Merge branch 'core/urgent' into x86/urgent, to pick up objtool fixIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-11-03net: hns3: Fix for out-of-bounds access when setting pfc back pressureYunsheng Lin
The vport should be initialized to hdev->vport for each bp group, otherwise it will cause out-of-bounds access and bp setting not correct problem. [ 35.254124] BUG: KASAN: slab-out-of-bounds in hclge_pause_setup_hw+0x2a0/0x3f8 [hclge] [ 35.254126] Read of size 2 at addr ffff803b6651581a by task kworker/0:1/14 [ 35.254132] CPU: 0 PID: 14 Comm: kworker/0:1 Not tainted 4.19.0-rc7-hulk+ #85 [ 35.254133] Hardware name: Huawei D06/D06, BIOS Hisilicon D06 UEFI RC0 - B052 (V0.52) 09/14/2018 [ 35.254141] Workqueue: events work_for_cpu_fn [ 35.254144] Call trace: [ 35.254147] dump_backtrace+0x0/0x2f0 [ 35.254149] show_stack+0x24/0x30 [ 35.254154] dump_stack+0x110/0x184 [ 35.254157] print_address_description+0x168/0x2b0 [ 35.254160] kasan_report+0x184/0x310 [ 35.254162] __asan_load2+0x7c/0xa0 [ 35.254170] hclge_pause_setup_hw+0x2a0/0x3f8 [hclge] [ 35.254177] hclge_tm_init_hw+0x794/0x9f0 [hclge] [ 35.254184] hclge_tm_schd_init+0x48/0x58 [hclge] [ 35.254191] hclge_init_ae_dev+0x778/0x1168 [hclge] [ 35.254196] hnae3_register_ae_dev+0x14c/0x298 [hnae3] [ 35.254206] hns3_probe+0x88/0xa8 [hns3] [ 35.254210] local_pci_probe+0x7c/0xf0 [ 35.254212] work_for_cpu_fn+0x34/0x50 [ 35.254214] process_one_work+0x4d4/0xa38 [ 35.254216] worker_thread+0x55c/0x8d8 [ 35.254219] kthread+0x1b0/0x1b8 [ 35.254222] ret_from_fork+0x10/0x1c [ 35.254224] The buggy address belongs to the page: [ 35.254228] page:ffff7e00ed994400 count:1 mapcount:0 mapping:0000000000000000 index:0x0 compound_mapcount: 0 [ 35.273835] flags: 0xfffff8000008000(head) [ 35.282007] raw: 0fffff8000008000 dead000000000100 dead000000000200 0000000000000000 [ 35.282010] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 [ 35.282012] page dumped because: kasan: bad access detected [ 35.282014] Memory state around the buggy address: [ 35.282017] ffff803b66515700: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282019] ffff803b66515780: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282021] >ffff803b66515800: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282022] ^ [ 35.282024] ffff803b66515880: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282026] ffff803b66515900: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282028] ================================================================== [ 35.282029] Disabling lock debugging due to kernel taint [ 35.282747] hclge driver initialization finished. Fixes: 67bf2541f4b9 ("net: hns3: Fixes the back pressure setting when sriov is enabled") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03Merge branch 'net-bql-better-deal-with-GSO'David S. Miller
Eric Dumazet says: ==================== net: bql: better deal with GSO While BQL bulk dequeue works well for TSO packets, it is not very efficient as soon as GSO is involved. On a GSO only workload (UDP or TCP), this patch series can save about 8 % of cpu cycles on a 40Gbit mlx4 NIC, by keeping optimal batching, and avoiding expensive doorbells, qdisc requeues and reschedules. This patch series : - Add __netdev_tx_sent_queue() so that drivers can implement efficient BQL and xmit_more support. - Implement a work around in dev_hard_start_xmit() for drivers not using __netdev_tx_sent_queue() - changes mlx4 to use __netdev_tx_sent_queue() v2: Tariq and Willem feedback addressed. added __netdev_tx_sent_queue() (Willem suggestion) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03net/mlx4_en: use __netdev_tx_sent_queue()Eric Dumazet
doorbell only depends on xmit_more and netif_tx_queue_stopped() Using __netdev_tx_sent_queue() avoids messing with BQL stop flag, and is more generic. This patch increases performance on GSO workload by keeping doorbells to the minimum required. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03net: do not abort bulk send on BQL statusEric Dumazet
Before calling dev_hard_start_xmit(), upper layers tried to cook optimal skb list based on BQL budget. Problem is that GSO packets can end up comsuming more than the BQL budget. Breaking the loop is not useful, since requeued packets are ahead of any packets still in the qdisc. It is also more expensive, since next TX completion will push these packets later, while skbs are not in cpu caches. It is also a behavior difference with TSO packets, that can break the BQL limit by a large amount. Note that drivers should use __netdev_tx_sent_queue() in order to have optimal xmit_more support, and avoid useless atomic operations as shown in the following patch. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03net: bql: add __netdev_tx_sent_queue()Eric Dumazet
When qdisc_run() tries to use BQL budget to bulk-dequeue a batch of packets, GSO can later transform this list in another list of skbs, and each skb is sent to device ndo_start_xmit(), one at a time, with skb->xmit_more being set to one but for last skb. Problem is that very often, BQL limit is hit in the middle of the packet train, forcing dev_hard_start_xmit() to stop the bulk send and requeue the end of the list. BQL role is to avoid head of line blocking, making sure a qdisc can deliver high priority packets before low priority ones. But there is no way requeued packets can be bypassed by fresh packets in the qdisc. Aborting the bulk send increases TX softirqs, and hot cache lines (after skb_segment()) are wasted. Note that for TSO packets, we never split a packet in the middle because of BQL limit being hit. Drivers should be able to update BQL counters without flipping/caring about BQL status, if the current skb has xmit_more set. Upper layers are ultimately responsible to stop sending another packet train when BQL limit is hit. Code template in a driver might look like the following : send_doorbell = __netdev_tx_sent_queue(tx_queue, nr_bytes, skb->xmit_more); Note that __netdev_tx_sent_queue() use is not mandatory, since following patch will change dev_hard_start_xmit() to not care about BQL status. But it is highly recommended so that xmit_more full benefits can be reached (less doorbells sent, and less atomic operations as well) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A few fixes who have come in near or during the merge window: - Removal of a VLA usage in Marvell mpp platform code - Enable some IPMI options for ARM64 servers by default, helps testing - Enable PREEMPT on 32-bit ARMv7 defconfig - Minor fix for stm32 DT (removal of an unused DMA property) - Bugfix for TI OMAP1-based ams-delta (-EINVAL -> IRQ_NOTCONNECTED)" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: stm32: update HASH1 dmas property on stm32mp157c ARM: orion: avoid VLA in orion_mpp_conf ARM: defconfig: Update multi_v7 to use PREEMPT arm64: defconfig: Enable some IPMI configs soc: ti: QMSS: Fix usage of irq_set_affinity_hint ARM: OMAP1: ams-delta: Fix impossible .irq < 0
2018-11-03Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull more arm64 updates from Catalin Marinas: - fix W+X page (mark RO) allocated by the arm64 kprobes code - Makefile fix for .i files in out of tree modules * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: kprobe: make page to RO mode when allocate it arm64: kdump: fix small typo arm64: makefile fix build of .i file in external module case
2018-11-03Merge tag 'dma-mapping-4.20-2' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping fix from Christoph Hellwig: "Avoid compile warnings on non-default arm64 configs" * tag 'dma-mapping-4.20-2' of git://git.infradead.org/users/hch/dma-mapping: arm64: fix warnings without CONFIG_IOMMU_DMA
2018-11-03Merge tag 'kbuild-v4.20-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - clean-up leftovers in Kconfig files - remove stale oldnoconfig and silentoldconfig targets - remove unneeded cc-fullversion and cc-name variables - improve merge_config script to allow overriding option prefix * tag 'kbuild-v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: remove cc-name variable kbuild: replace cc-name test with CONFIG_CC_IS_CLANG merge_config.sh: Allow to define config prefix kbuild: remove unused cc-fullversion variable kconfig: remove silentoldconfig target kconfig: remove oldnoconfig target powerpc: PCI_MSI needs PCI powerpc: remove CONFIG_MCA leftovers powerpc: remove CONFIG_PCI_QSPAN scsi: aha152x: rename the PCMCIA define
2018-11-03Merge tag '4.20-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs fixes and updates from Steve French: "Three small fixes (one Kerberos related, one for stable, and another fixes an oops in xfstest 377), two helpful debugging improvements, three patches for cifs directio and some minor cleanup" * tag '4.20-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: fix signed/unsigned mismatch on aio_read patch cifs: don't dereference smb_file_target before null check CIFS: Add direct I/O functions to file_operations CIFS: Add support for direct I/O write CIFS: Add support for direct I/O read smb3: missing defines and structs for reparse point handling smb3: allow more detailed protocol info on open files for debugging smb3: on kerberos mount if server doesn't specify auth type use krb5 smb3: add trace point for tree connection cifs: fix spelling mistake, EACCESS -> EACCES cifs: fix return value for cifs_listxattr
2018-11-03Merge branch 's390-qeth-fixes'David S. Miller
Julian Wiedmann says: ==================== s390/qeth: fixes 2018-11-02 please apply one round of qeth fixes for -net. Patch 1 is rather large and removes a use-after-free hazard from many of our debug trace entries. Patch 2 is yet another fix-up for the L3 subdriver's new IP address management code. Patch 3 and 4 resolve some fallout from the recent changes wrt how/when qeth allocates its net_device. Patch 5 makes sure we don't set reserved bits when building HW commands from user-provided data. And finally, patch 6 allows ethtool to play nice with new HW. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03s390/qeth: report 25Gbit link speedJulian Wiedmann
This adds the various identifiers for 25Gbit cards, and wires them up into sysfs and ethtool. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03s390/qeth: sanitize ARP requestsJulian Wiedmann
The ARP_{ADD,REMOVE}_ENTRY cmd structs contain reserved fields. Introduce a common helper that doesn't raw-copy the user-provided data into the cmd, but only sets those fields that are strictly needed for the command. This also sets the correct command length for ARP_REMOVE_ENTRY. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03s390/qeth: fix initial operstateJulian Wiedmann
Setting the carrier 'on' for an unregistered netdevice doesn't update its operstate. Fix this by delaying the update until the netdevice has been registered. Fixes: 91cc98f51e3d ("s390/qeth: remove duplicated carrier state tracking") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03s390/qeth: unregister netdevice only when registeredJulian Wiedmann
qeth only registers its netdevice when the qeth device is first set online. Thus a device that has never been set online will trigger a WARN ("network todo 'hsi%d' but state 0") in unregister_netdev() when removed. Fix this by protecting the unregister step, just like we already protect against repeated registering of the netdevice. Fixes: d3d1b205e89f ("s390/qeth: allocate netdevice early") Reported-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03s390/qeth: fix HiperSockets snifferJulian Wiedmann
Sniffing mode for L3 HiperSockets requires that no IP addresses are registered with the HW. The preferred way to achieve this is for userspace to delete all the IPs on the interface. But qeth is expected to also tolerate a configuration where that is not the case, by skipping the IP registration when in sniffer mode. Since commit 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback") reworked the IP registration logic in the L3 subdriver, this no longer works. When the qeth device is set online, qeth_l3_recover_ip() now unconditionally registers all unicast addresses from our internal IP table. While we could fix this particular problem by skipping qeth_l3_recover_ip() on a sniffer device, the more future-proof change is to skip the IP address registration at the lowest level. This way we a) catch any future code path that attempts to register an IP address without considering the sniffer scenario, and b) continue to build up our internal IP table, so that if sniffer mode is switched off later we can operate just like normal. Fixes: 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03s390/qeth: sanitize strings in debug messagesJulian Wiedmann
As Documentation/s390/s390dbf.txt states quite clearly, using any pointer in sprinf-formatted s390dbf debug entries is dangerous. The pointers are dereferenced whenever the trace file is read from. So if the referenced data has a shorter life-time than the trace file, any read operation can result in a use-after-free. So rip out all hazardous use of indirect data, and replace any usage of dev_name() and such by the Bus ID number. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03Merge branch 'work.afs' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull 9p fix from Al Viro: "Regression fix for net/9p handling of iov_iter; broken by braino when switching to iov_iter_is_kvec() et.al., spotted and fixed by Marc" * 'work.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: iov_iter: Fix 9p virtio breakage
2018-11-03Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull more SCSI updates from James Bottomley: "This is a set of minor small (and safe changes) that didn't make the initial pull request plus some bug fixes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: mvsas: Remove set but not used variable 'id' scsi: qla2xxx: Remove two arguments from qlafx00_error_entry() scsi: qla2xxx: Make sure that qlafx00_ioctl_iosb_entry() initializes 'res' scsi: qla2xxx: Remove a set-but-not-used variable scsi: qla2xxx: Make qla2x00_sysfs_write_nvram() easier to analyze scsi: qla2xxx: Declare local functions 'static' scsi: qla2xxx: Improve several kernel-doc headers scsi: qla2xxx: Modify fall-through annotations scsi: 3w-sas: 3w-9xxx: Use unsigned char for cdb scsi: mvsas: Use dma_pool_zalloc scsi: target: Don't request modules that aren't even built scsi: target: Set response length for REPORT TARGET PORT GROUPS
2018-11-03Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge more updates from Andrew Morton: - more ocfs2 work - various leftovers * emailed patches from Andrew Morton <akpm@linux-foundation.org>: memory_hotplug: cond_resched in __remove_pages bfs: add sanity check at bfs_fill_super() kernel/sysctl.c: remove duplicated include kernel/kexec_file.c: remove some duplicated includes mm, thp: consolidate THP gfp handling into alloc_hugepage_direct_gfpmask ocfs2: fix clusters leak in ocfs2_defrag_extent() ocfs2: dlmglue: clean up timestamp handling ocfs2: don't put and assigning null to bh allocated outside ocfs2: fix a misuse a of brelse after failing ocfs2_check_dir_entry ocfs2: don't use iocb when EIOCBQUEUED returns ocfs2: without quota support, avoid calling quota recovery ocfs2: remove ocfs2_is_o2cb_active() mm: thp: relax __GFP_THISNODE for MADV_HUGEPAGE mappings include/linux/notifier.h: SRCU: fix ctags mm: handle no memcg case in memcg_kmem_charge() properly
2018-11-03memory_hotplug: cond_resched in __remove_pagesMichal Hocko
We have received a bug report that unbinding a large pmem (>1TB) can result in a soft lockup: NMI watchdog: BUG: soft lockup - CPU#9 stuck for 23s! [ndctl:4365] [...] Supported: Yes CPU: 9 PID: 4365 Comm: ndctl Not tainted 4.12.14-94.40-default #1 SLE12-SP4 Hardware name: Intel Corporation S2600WFD/S2600WFD, BIOS SE5C620.86B.01.00.0833.051120182255 05/11/2018 task: ffff9cce7d4410c0 task.stack: ffffbe9eb1bc4000 RIP: 0010:__put_page+0x62/0x80 Call Trace: devm_memremap_pages_release+0x152/0x260 release_nodes+0x18d/0x1d0 device_release_driver_internal+0x160/0x210 unbind_store+0xb3/0xe0 kernfs_fop_write+0x102/0x180 __vfs_write+0x26/0x150 vfs_write+0xad/0x1a0 SyS_write+0x42/0x90 do_syscall_64+0x74/0x150 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x7fd13166b3d0 It has been reported on an older (4.12) kernel but the current upstream code doesn't cond_resched in the hot remove code at all and the given range to remove might be really large. Fix the issue by calling cond_resched once per memory section. Link: http://lkml.kernel.org/r/20181031125840.23982-1-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Thumshirn <jthumshirn@suse.de> Cc: Dan Williams <dan.j.williams@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-03bfs: add sanity check at bfs_fill_super()Tetsuo Handa
syzbot is reporting too large memory allocation at bfs_fill_super() [1]. Since file system image is corrupted such that bfs_sb->s_start == 0, bfs_fill_super() is trying to allocate 8MB of continuous memory. Fix this by adding a sanity check on bfs_sb->s_start, __GFP_NOWARN and printf(). [1] https://syzkaller.appspot.com/bug?id=16a87c236b951351374a84c8a32f40edbc034e96 Link: http://lkml.kernel.org/r/1525862104-3407-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by: syzbot <syzbot+71c6b5d68e91149fc8a4@syzkaller.appspotmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Tigran Aivazian <aivazian.tigran@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-03kernel/sysctl.c: remove duplicated includeMichael Schupikov
Remove one include of <linux/pipe_fs_i.h>. No functional changes. Link: http://lkml.kernel.org/r/20181004134223.17735-1-michael@schupikov.de Signed-off-by: Michael Schupikov <michael@schupikov.de> Reviewed-by: Richard Weinberger <richard@nod.at> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit (git 2.34.1) at 2025-07-16 11:52:01 +0000