summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-02-15CDC-NCM: avoid overflow in sanity checkingOliver Neukum
A broken device may give an extreme offset like 0xFFF0 and a reasonable length for a fragment. In the sanity check as formulated now, this will create an integer overflow, defeating the sanity check. Both offset and offset + len need to be checked in such a manner that no overflow can occur. And those quantities should be unsigned. Signed-off-by: Oliver Neukum <oneukum@suse.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-15EDAC: Fix calculation of returned address and next offset in edac_align_ptr()Eliav Farber
Do alignment logic properly and use the "ptr" local variable for calculating the remainder of the alignment. This became an issue because struct edac_mc_layer has a size that is not zero modulo eight, and the next offset that was prepared for the private data was unaligned, causing an alignment exception. The patch in Fixes: which broke this actually wanted to "what we actually care about is the alignment of the actual pointer that's about to be returned." But it didn't check that alignment. Use the correct variable "ptr" for that. [ bp: Massage commit message. ] Fixes: 8447c4d15e35 ("edac: Do alignment logic properly in edac_align_ptr()") Signed-off-by: Eliav Farber <farbere@amazon.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220113100622.12783-2-farbere@amazon.com
2022-02-15mctp: fix use after freeTom Rix
Clang static analysis reports this problem route.c:425:4: warning: Use of memory after it is freed trace_mctp_key_acquire(key); ^~~~~~~~~~~~~~~~~~~~~~~~~~~ When mctp_key_add() fails, key is freed but then is later used in trace_mctp_key_acquire(). Add an else statement to use the key only when mctp_key_add() is successful. Fixes: 4f9e1ba6de45 ("mctp: Add tracepoints for tag/key handling") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-15net: mscc: ocelot: fix use-after-free in ocelot_vlan_del()Vladimir Oltean
ocelot_vlan_member_del() will free the struct ocelot_bridge_vlan, so if this is the same as the port's pvid_vlan which we access afterwards, what we're accessing is freed memory. Fix the bug by determining whether to clear ocelot_port->pvid_vlan prior to calling ocelot_vlan_member_del(). Fixes: d4004422f6f9 ("net: mscc: ocelot: track the port pvid using a pointer") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-15bonding: fix data-races around agg_select_timerEric Dumazet
syzbot reported that two threads might write over agg_select_timer at the same time. Make agg_select_timer atomic to fix the races. BUG: KCSAN: data-race in bond_3ad_initiate_agg_selection / bond_3ad_state_machine_handler read to 0xffff8881242aea90 of 4 bytes by task 1846 on cpu 1: bond_3ad_state_machine_handler+0x99/0x2810 drivers/net/bonding/bond_3ad.c:2317 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307 worker_thread+0x616/0xa70 kernel/workqueue.c:2454 kthread+0x1bf/0x1e0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 write to 0xffff8881242aea90 of 4 bytes by task 25910 on cpu 0: bond_3ad_initiate_agg_selection+0x18/0x30 drivers/net/bonding/bond_3ad.c:1998 bond_open+0x658/0x6f0 drivers/net/bonding/bond_main.c:3967 __dev_open+0x274/0x3a0 net/core/dev.c:1407 dev_open+0x54/0x190 net/core/dev.c:1443 bond_enslave+0xcef/0x3000 drivers/net/bonding/bond_main.c:1937 do_set_master net/core/rtnetlink.c:2532 [inline] do_setlink+0x94f/0x2500 net/core/rtnetlink.c:2736 __rtnl_newlink net/core/rtnetlink.c:3414 [inline] rtnl_newlink+0xfeb/0x13e0 net/core/rtnetlink.c:3529 rtnetlink_rcv_msg+0x745/0x7e0 net/core/rtnetlink.c:5594 netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2494 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5612 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x602/0x6d0 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x728/0x850 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2413 ___sys_sendmsg net/socket.c:2467 [inline] __sys_sendmsg+0x195/0x230 net/socket.c:2496 __do_sys_sendmsg net/socket.c:2505 [inline] __se_sys_sendmsg net/socket.c:2503 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2503 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x00000050 -> 0x0000004f Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 25910 Comm: syz-executor.1 Tainted: G W 5.17.0-rc4-syzkaller-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-15dpaa2-eth: Initialize mutex used in one step timestamping pathRadu Bulie
1588 Single Step Timestamping code path uses a mutex to enforce atomicity for two events: - update of ptp single step register - transmit ptp event packet Before this patch the mutex was not initialized. This caused unexpected crashes in the Tx function. Fixes: c55211892f463 ("dpaa2-eth: support PTP Sync packet one-step timestamping") Signed-off-by: Radu Bulie <radu-andrei.bulie@nxp.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-15dpaa2-switch: fix default return of dpaa2_switch_flower_parse_mirror_keyTom Rix
Clang static analysis reports this representative problem dpaa2-switch-flower.c:616:24: warning: The right operand of '==' is a garbage value tmp->cfg.vlan_id == vlan) { ^ ~~~~ vlan is set in dpaa2_switch_flower_parse_mirror_key(). However this function can return success without setting vlan. So change the default return to -EOPNOTSUPP. Fixes: 0f3faece5808 ("dpaa2-switch: add VLAN based mirroring") Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-15ipv4: add description about martian sourceZhang Yunkai
When multiple containers are running in the environment and multiple macvlan network port are configured in each container, a lot of martian source prints will appear after martian_log is enabled. they are almost the same, and printed by net_warn_ratelimited. Each arp message will trigger this print on each network port. Such as: IPv4: martian source 173.254.95.16 from 173.254.100.109, on dev eth0 ll header: 00000000: ff ff ff ff ff ff 40 00 ad fe 64 6d 08 06 ......@...dm.. IPv4: martian source 173.254.95.16 from 173.254.100.109, on dev eth1 ll header: 00000000: ff ff ff ff ff ff 40 00 ad fe 64 6d 08 06 ......@...dm.. There is no description of this kind of source in the RFC1812. Signed-off-by: Zhang Yunkai <zhang.yunkai@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-15crypto: af_alg - get rid of alg_memory_allocatedEric Dumazet
alg_memory_allocated does not seem to be really used. alg_proto does have a .memory_allocated field, but no corresponding .sysctl_mem. This means sk_has_account() returns true, but all sk_prot_mem_limits() users will trigger a NULL dereference [1]. THis was not a problem until SO_RESERVE_MEM addition. general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 1 PID: 3591 Comm: syz-executor153 Not tainted 5.17.0-rc3-syzkaller-00316-gb81b1829e7e3 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:sk_prot_mem_limits include/net/sock.h:1523 [inline] RIP: 0010:sock_reserve_memory+0x1d7/0x330 net/core/sock.c:1000 Code: 08 00 74 08 48 89 ef e8 27 20 bb f9 4c 03 7c 24 10 48 8b 6d 00 48 83 c5 08 48 89 e8 48 c1 e8 03 48 b9 00 00 00 00 00 fc ff df <80> 3c 08 00 74 08 48 89 ef e8 fb 1f bb f9 48 8b 6d 00 4c 89 ff 48 RSP: 0018:ffffc90001f1fb68 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff88814aabc000 RCX: dffffc0000000000 RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffffff90e18120 RBP: 0000000000000008 R08: dffffc0000000000 R09: fffffbfff21c3025 R10: fffffbfff21c3025 R11: 0000000000000000 R12: ffffffff8d109840 R13: 0000000000001002 R14: 0000000000000001 R15: 0000000000000001 FS: 0000555556e08300(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc74416f130 CR3: 0000000073d9e000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> sock_setsockopt+0x14a9/0x3a30 net/core/sock.c:1446 __sys_setsockopt+0x5af/0x980 net/socket.c:2176 __do_sys_setsockopt net/socket.c:2191 [inline] __se_sys_setsockopt net/socket.c:2188 [inline] __x64_sys_setsockopt+0xb1/0xc0 net/socket.c:2188 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fc7440fddc9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffe98f07968 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fc7440fddc9 RDX: 0000000000000049 RSI: 0000000000000001 RDI: 0000000000000004 RBP: 0000000000000000 R08: 0000000000000004 R09: 00007ffe98f07990 R10: 0000000020000000 R11: 0000000000000246 R12: 00007ffe98f0798c R13: 00007ffe98f079a0 R14: 00007ffe98f079e0 R15: 0000000000000000 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:sk_prot_mem_limits include/net/sock.h:1523 [inline] RIP: 0010:sock_reserve_memory+0x1d7/0x330 net/core/sock.c:1000 Code: 08 00 74 08 48 89 ef e8 27 20 bb f9 4c 03 7c 24 10 48 8b 6d 00 48 83 c5 08 48 89 e8 48 c1 e8 03 48 b9 00 00 00 00 00 fc ff df <80> 3c 08 00 74 08 48 89 ef e8 fb 1f bb f9 48 8b 6d 00 4c 89 ff 48 RSP: 0018:ffffc90001f1fb68 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff88814aabc000 RCX: dffffc0000000000 RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffffff90e18120 RBP: 0000000000000008 R08: dffffc0000000000 R09: fffffbfff21c3025 R10: fffffbfff21c3025 R11: 0000000000000000 R12: ffffffff8d109840 R13: 0000000000001002 R14: 0000000000000001 R15: 0000000000000001 FS: 0000555556e08300(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc74416f130 CR3: 0000000073d9e000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 Fixes: 2bb2f5fb21b0 ("net: add new socket option SO_RESERVE_MEM") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-15Merge tag 'ieee802154-for-net-2022-02-15' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan Stefan Schmidt says: ==================== Only a single fix this time. Miquel Raynal fixed the lifs/sifs periods in the ca82010 to take the actual symbol duration time into account. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-15net: phy: mediatek: remove PHY mode check on MT7531DENG Qingfang
The function mt7531_phy_mode_supported in the DSA driver set supported mode to PHY_INTERFACE_MODE_GMII instead of PHY_INTERFACE_MODE_INTERNAL for the internal PHY, so this check breaks the PHY initialization: mt7530 mdio-bus:00 wan (uninitialized): failed to connect to PHY: -EINVAL Remove the check to make it work again. Reported-by: Hauke Mehrtens <hauke@hauke-m.de> Fixes: e40d2cca0189 ("net: phy: add MediaTek Gigabit Ethernet PHY driver") Signed-off-by: DENG Qingfang <dqfext@gmail.com> Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com> Tested-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-15powerpc/lib/sstep: fix 'ptesync' build errorAnders Roxell
Building tinyconfig with gcc (Debian 11.2.0-16) and assembler (Debian 2.37.90.20220207) the following build error shows up: {standard input}: Assembler messages: {standard input}:2088: Error: unrecognized opcode: `ptesync' make[3]: *** [/builds/linux/scripts/Makefile.build:287: arch/powerpc/lib/sstep.o] Error 1 Add the 'ifdef CONFIG_PPC64' around the 'ptesync' in function 'emulate_update_regs()' to like it is in 'analyse_instr()'. Since it looks like it got dropped inadvertently by commit 3cdfcbfd32b9 ("powerpc: Change analyse_instr so it doesn't modify *regs"). A key detail is that analyse_instr() will never recognise lwsync or ptesync on 32-bit (because of the existing ifdef), and as a result emulate_update_regs() should never be called with an op specifying either of those on 32-bit. So removing them from emulate_update_regs() should be a nop in terms of runtime behaviour. Fixes: 3cdfcbfd32b9 ("powerpc: Change analyse_instr so it doesn't modify *regs") Cc: stable@vger.kernel.org # v4.14+ Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> [mpe: Add last paragraph of change log mentioning analyse_instr() details] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220211005113.1361436-1-anders.roxell@linaro.org
2022-02-15i2c: qup: allow COMPILE_TESTWolfram Sang
Driver builds fine with COMPILE_TEST. Enable it for wider test coverage and easier maintenance. Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-02-15i2c: imx: allow COMPILE_TESTWolfram Sang
Driver builds fine with COMPILE_TEST. Enable it for wider test coverage and easier maintenance. Signed-off-by: Wolfram Sang <wsa@kernel.org> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
2022-02-15i2c: cadence: allow COMPILE_TESTWolfram Sang
Driver builds fine with COMPILE_TEST. Enable it for wider test coverage and easier maintenance. Signed-off-by: Wolfram Sang <wsa@kernel.org> Acked-by: Michal Simek <michal.simek@xilinx.com>
2022-02-15dmaengine: shdma: Fix runtime PM imbalance on errorYongzhi Liu
pm_runtime_get_() increments the runtime PM usage counter even when it returns an error code, thus a matching decrement is needed on the error handling path to keep the counter balanced. Signed-off-by: Yongzhi Liu <lyz_cs@pku.edu.cn> Link: https://lore.kernel.org/r/1642311296-87020-1-git-send-email-lyz_cs@pku.edu.cn Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-02-15dmaengine: sh: rcar-dmac: Check for error num after dma_set_max_seg_sizeJiasheng Jiang
As the possible failure of the dma_set_max_seg_size(), it should be better to check the return value of the dma_set_max_seg_size(). Fixes: 97d49c59e219 ("dmaengine: rcar-dmac: set scatter/gather max segment size") Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220111011239.452837-1-jiasheng@iscas.ac.cn Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-02-15dmaengine: stm32-dmamux: Fix PM disable depth imbalance in stm32_dmamux_probeMiaoqian Lin
The pm_runtime_enable will increase power disable depth. If the probe fails, we should use pm_runtime_disable() to balance pm_runtime_enable(). Fixes: 4f3ceca254e0 ("dmaengine: stm32-dmamux: Add PM Runtime support") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20220108085336.11992-1-linmq006@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-02-15dmaengine: sh: rcar-dmac: Check for error num after setting maskJiasheng Jiang
Because of the possible failure of the dma_supported(), the dma_set_mask_and_coherent() may return error num. Therefore, it should be better to check it and return the error if fails. Fixes: dc312349e875 ("dmaengine: rcar-dmac: Widen DMA mask to 40 bits") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220106030939.2644320-1-jiasheng@iscas.ac.cn Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-02-15dmaengine: at_xdmac: Fix missing unlock in at_xdmac_tasklet()Yang Yingliang
Add the missing unlock before return from at_xdmac_tasklet(). Fixes: e77e561925df ("dmaengine: at_xdmac: Fix race over irq_status") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20220107024047.1051915-1-yangyingliang@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-02-14tipc: fix wrong publisher node address in link publicationsJon Maloy
When a link comes up we add its presence to the name table to make it possible for users to subscribe for link up/down events. However, after a previous call signature change the binding is wrongly published with the peer node as publishing node, instead of the own node as it should be. This has the effect that the command 'tipc name table show' will list the link binding (service type 2) with node scope and a peer node as originator, something that obviously is impossible. We correct this bug here. Fixes: 50a3499ab853 ("tipc: simplify signature of tipc_namtbl_publish()") Signed-off-by: Jon Maloy <jmaloy@redhat.com> Link: https://lore.kernel.org/r/20220214013852.2803940-1-jmaloy@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-15dmaengine: ptdma: Fix the error handling path in pt_core_init()Christophe JAILLET
In order to free resources correctly in the error handling path of pt_core_init(), 2 goto's have to be switched. Otherwise, some resources will leak and we will try to release things that have not been allocated yet. Also move a dev_err() to a place where it is more meaningful. Fixes: fa5d823b16a9 ("dmaengine: ptdma: Initial driver for the AMD PTDMA") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Sanjay R Mehta <sanju.mehta@amd.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/41a963a35173f89c874f5c44df5530dc09fea8da.1644044244.git.christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-02-14scsi: ufs: core: Fix divide by zero in ufshcd_map_queues()Jinyoung Choi
Before calling blk_mq_map_queues(), the mq_map and nr_queues belonging to struct blk_mq_queue_map must have a valid value. If nr_queues is set to 0, the system may encounter a divide by zero depending on the type of architecture. blk_mq_map_queues() -> queue_index() Link: https://lore.kernel.org/r/1891546521.01644873481638.JavaMail.epsvc@epcpadp4 Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jinyoung Choi <j-young.choi@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-14scsi: lpfc: Fix pt2pt NVMe PRLI reject LOGO loopJames Smart
When connected point to point, the driver does not know the FC4's supported by the other end. In Fabrics, it can query the nameserver. Thus the driver must send PRLIs for the FC4s it supports and enable support based on the acc(ept) or rej(ect) of the respective FC4 PRLI. Currently the driver supports SCSI and NVMe PRLIs. Unfortunately, although the behavior is per standard, many devices have come to expect only SCSI PRLIs. In this particular example, the NVMe PRLI is properly RJT'd but the target decided that it must LOGO after seeing the unexpected NVMe PRLI. The LOGO causes the sequence to restart and login is now in an infinite failure loop. Fix the problem by having the driver, on a pt2pt link, remember NVMe PRLI accept or reject status across logout as long as the link stays "up". When retrying login, if the prior NVMe PRLI was rejected, it will not be sent on the next login. Link: https://lore.kernel.org/r/20220212163120.15385-1-jsmart2021@gmail.com Cc: <stable@vger.kernel.org> # v5.4+ Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-14selftests/ftrace: Do not trace do_softirq because of PREEMPT_RTKrzysztof Kozlowski
The PREEMPT_RT patchset does not use do_softirq() function thus trying to filter for do_softirq fails for such kernel: echo do_softirq ftracetest: 81: echo: echo: I/O error Choose some other visible function for the test. The function does not have to be actually executed during the test, because it is only testing filter API interface. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-02-14RISC-V: Fix IPI/RFENCE hmask on non-monotonic hartid orderingGeert Uytterhoeven
If the boot CPU does not have the lowest hartid, "hartid - hbase" can become negative, leading to an incorrect hmask, causing userspace to crash with SEGV. This is observed on e.g. Starlight Beta, where cpuid 1 maps to hartid 0, and cpuid 0 maps to hartid 1. Fix this by detecting this case, and shifting the accumulated mask and updating hbase, if possible. Fixes: 26fb751ca37846c9 ("RISC-V: Do not use cpumask data structure for hartid bitmap") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Atish Patra <atishp@rivosinc.com> Tested-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-02-14RISC-V: Fix handling of empty cpu masksGeert Uytterhoeven
The cpumask rework slightly changed the behavior of the code. Fix this by treating an empty cpumask as meaning all online CPUs. Extracted from a patch by Atish Patra <atishp@rivosinc.com>. Reported-by: Jessica Clarke <jrtc27@jrtc27.com> Fixes: 26fb751ca37846c9 ("RISC-V: Do not use cpumask data structure for hartid bitmap") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-02-14RISC-V: Fix hartid mask handling for hartid 31 and upGeert Uytterhoeven
Jessica reports that using "1 << hartid" causes undefined behavior for hartid 31 and up. Fix this by using the BIT() helper instead of an explicit shift. Reported-by: Jessica Clarke <jrtc27@jrtc27.com> Fixes: 26fb751ca37846c9 ("RISC-V: Do not use cpumask data structure for hartid bitmap") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-02-14drm/radeon: Fix backlight control on iMac 12,1Nicholas Bishop
The iMac 12,1 does not use the gmux driver for backlight, so the radeon backlight device is needed to set the brightness. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1838 Signed-off-by: Nicholas Bishop <nicholasbishop@google.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-02-14drm/amd/pm: correct the sequence of sending gpu reset msgYifan Zhang
the 2nd parameter should be smu msg type rather than asic msg index. Fixes: 7d38d9dc4ecc ("drm/amdgpu: add mode2 reset support for yellow carp") Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Acked-by: Aaron Liu <aaron.liu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-02-14drm/amdgpu: skipping SDMA hw_init and hw_fini for S0ix.Rajib Mahapatra
[Why] SDMA ring buffer test failed if suspend is aborted during S0i3 resume. [How] If suspend is aborted for some reason during S0i3 resume cycle, it follows SDMA ring test failing and errors in amdgpu resume. For RN/CZN/Picasso, SMU saves and restores SDMA registers during S0ix cycle. So, skipping SDMA suspend and resume from driver solves the issue. This time, the system is able to resume gracefully even the suspend is aborted. Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rajib Mahapatra <rajib.mahapatra@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-02-14drm/amd/pm: correct UMD pstate clocks for Dimgrey Cavefish and Beige GobyEvan Quan
Correct the UMD pstate profiling clocks for Dimgrey Cavefish and Beige Goby. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-14NFS: LOOKUP_DIRECTORY is also ok with symlinksTrond Myklebust
Commit ac795161c936 (NFSv4: Handle case where the lookup of a directory fails) [1], part of Linux since 5.17-rc2, introduced a regression, where a symbolic link on an NFS mount to a directory on another NFS does not resolve(?) the first time it is accessed: Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Fixes: ac795161c936 ("NFSv4: Handle case where the lookup of a directory fails") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Tested-by: Donald Buczek <buczek@molgen.mpg.de> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2022-02-14NFS: Remove an incorrect revalidation in nfs4_update_changeattr_locked()Trond Myklebust
In nfs4_update_changeattr_locked(), we don't need to set the NFS_INO_REVAL_PAGECACHE flag, because we already know the value of the change attribute, and we're already flagging the size. In fact, this forces us to revalidate the change attribute a second time for no good reason. This extra flag appears to have been introduced as part of the xattr feature, when update_changeattr_locked() was converted for use by the xattr code. Fixes: 1b523ca972ed ("nfs: modify update_changeattr to deal with regular files") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2022-02-14MAINTAINERS: Update Jiri's email addressJiri Olsa
Using my kernel.org email. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20220208221117.710405-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-02-14arm64: Correct wrong label in macro __init_el2_gicv3Joakim Tjernlund
In commit: 114945d84a30a5fe ("arm64: Fix labels in el2_setup macros") We renamed a label from '1' to '.Lskip_gicv3_\@', but failed to update a branch to it, which now targets a later label also called '1'. The branch is taken rarely, when GICv3 is present but SRE is disabled at EL3, causing a boot-time crash. Update the caller to the new label name. Fixes: 114945d84a30 ("arm64: Fix labels in el2_setup macros") Cc: <stable@vger.kernel.org> # 5.12.x Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com> Link: https://lore.kernel.org/r/20220214175643.21931-1-joakim.tjernlund@infinera.com Reviewed-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2022-02-14serial: parisc: GSC: fix build when IOSAPIC is not setRandy Dunlap
There is a build error when using a kernel .config file from 'kernel test robot' for a different build problem: hppa64-linux-ld: drivers/tty/serial/8250/8250_gsc.o: in function `.LC3': (.data.rel.ro+0x18): undefined reference to `iosapic_serial_irq' when: CONFIG_GSC=y CONFIG_SERIO_GSCPS2=y CONFIG_SERIAL_8250_GSC=y CONFIG_PCI is not set and hence PCI_LBA is not set. IOSAPIC depends on PCI_LBA, so IOSAPIC is not set/enabled. Make the use of iosapic_serial_irq() conditional to fix the build error. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: linux-parisc@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-serial@vger.kernel.org Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Johan Hovold <johan@kernel.org> Suggested-by: Helge Deller <deller@gmx.de> Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org Signed-off-by: Helge Deller <deller@gmx.de>
2022-02-14selftests/seccomp: Fix seccomp failure by adding missing headersSherry Yang
seccomp_bpf failed on tests 47 global.user_notification_filter_empty and 48 global.user_notification_filter_empty_threaded when it's tested on updated kernel but with old kernel headers. Because old kernel headers don't have definition of macro __NR_clone3 which is required for these two tests. Since under selftests/, we can install headers once for all tests (the default INSTALL_HDR_PATH is usr/include), fix it by adding usr/include to the list of directories to be searched. Use "-isystem" to indicate it's a system directory as the real kernel headers directories are. Signed-off-by: Sherry Yang <sherry.yang@oracle.com> Tested-by: Sherry Yang <sherry.yang@oracle.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-02-14Merge tag 'regulator-fix-v5.17-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fix from Mark Brown: "One fix here, for initialisation of regulators that don't have an in_enabled() operation which would mainly impact cases where they aren't otherwise used during early setup for some reason" * tag 'regulator-fix-v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: core: fix false positive in regulator_late_cleanup()
2022-02-14Merge tag 'asoc-fix-v5.17-rc4' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.18 More fixes that have arrived in the past few -rcs, plus a MAINTAINERS update. The biggest update here is the fix for control change notifications in ASoC generic controls found by mixer-test.
2022-02-14cifs: modefromsids must add an ACE for authenticated usersRonnie Sahlberg
When we create a file with modefromsids we set an ACL that has one ACE for the magic modefromsid as well as a second ACE that grants full access to all authenticated users. When later we chante the mode on the file we strip away this, and other, ACE for authenticated users in set_chmod_dacl() and then just add back/update the modefromsid ACE. Thus leaving the file with a single ACE that is for the mode and no ACE to grant any user any rights to access the file. Fix this by always adding back also the modefromsid ACE so that we do not drop the rights to access the file. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-02-14HID: amd_sfh: Add interrupt handler to process interruptsBasavaraj Natikar
On newer AMD platforms with SFH, it is observed that random interrupts get generated on the SFH hardware and until this is cleared the firmware sensor processing is stalled, resulting in no data been received to driver side. Add routines to handle these interrupts, so that firmware operations are not stalled. Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-02-14HID: amd_sfh: Add functionality to clear interruptsBasavaraj Natikar
Newer AMD platforms with SFH may generate interrupts on some events which are unwarranted. Until this is cleared the actual MP2 data processing maybe stalled in some cases. Add a mechanism to clear the pending interrupts (if any) during the driver initialization and sensor command operations. Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-02-14HID: amd_sfh: Disable the interrupt for all commandBasavaraj Natikar
Sensor data is processed in polling mode. Hence disable the interrupt for all sensor command. Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-02-14HID: amd_sfh: Correct the structure field nameBasavaraj Natikar
Misinterpreted intr_enable field name. Hence correct the structure field name accordingly to reflect the functionality. Fixes: f264481ad614 ("HID: amd_sfh: Extend driver capabilities for multi-generation support") Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-02-14HID: amd_sfh: Handle amd_sfh work buffer in PM opsBasavaraj Natikar
Since in the current amd_sfh design the sensor data is periodically obtained in the form of poll data, during the suspend/resume cycle, scheduling a delayed work adds no value. So, cancel the work and restart back during the suspend/resume cycle respectively. Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-02-14USB: zaurus: support another broken ZaurusOliver Neukum
This SL-6000 says Direct Line, not Ethernet v2: added Reporter and Link Signed-off-by: Oliver Neukum <oneukum@suse.com> Reported-by: Ross Maynard <bids.7405@bigpond.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=215361 Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-14MAINTAINERS: bridge: update my emailNikolay Aleksandrov
I'm leaving NVIDIA and my email account will stop working in a week, update it with my personal account. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-14net: fix documentation for kernel_getsocknameAlex Maydanik
Fixes return value documentation of kernel_getsockname() and kernel_getpeername() functions. The previous documentation wrongly specified that the return value is 0 in case of success, however sock->ops->getname returns the length of the address in bytes in case of success. Signed-off-by: Alex Maydanik <alexander.maydanik@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-14net_sched: add __rcu annotation to netdev->qdiscEric Dumazet
syzbot found a data-race [1] which lead me to add __rcu annotations to netdev->qdisc, and proper accessors to get LOCKDEP support. [1] BUG: KCSAN: data-race in dev_activate / qdisc_lookup_rcu write to 0xffff888168ad6410 of 8 bytes by task 13559 on cpu 1: attach_default_qdiscs net/sched/sch_generic.c:1167 [inline] dev_activate+0x2ed/0x8f0 net/sched/sch_generic.c:1221 __dev_open+0x2e9/0x3a0 net/core/dev.c:1416 __dev_change_flags+0x167/0x3f0 net/core/dev.c:8139 rtnl_configure_link+0xc2/0x150 net/core/rtnetlink.c:3150 __rtnl_newlink net/core/rtnetlink.c:3489 [inline] rtnl_newlink+0xf4d/0x13e0 net/core/rtnetlink.c:3529 rtnetlink_rcv_msg+0x745/0x7e0 net/core/rtnetlink.c:5594 netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2494 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5612 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x602/0x6d0 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x728/0x850 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2413 ___sys_sendmsg net/socket.c:2467 [inline] __sys_sendmsg+0x195/0x230 net/socket.c:2496 __do_sys_sendmsg net/socket.c:2505 [inline] __se_sys_sendmsg net/socket.c:2503 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2503 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff888168ad6410 of 8 bytes by task 13560 on cpu 0: qdisc_lookup_rcu+0x30/0x2e0 net/sched/sch_api.c:323 __tcf_qdisc_find+0x74/0x3a0 net/sched/cls_api.c:1050 tc_del_tfilter+0x1c7/0x1350 net/sched/cls_api.c:2211 rtnetlink_rcv_msg+0x5ba/0x7e0 net/core/rtnetlink.c:5585 netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2494 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5612 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x602/0x6d0 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x728/0x850 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2413 ___sys_sendmsg net/socket.c:2467 [inline] __sys_sendmsg+0x195/0x230 net/socket.c:2496 __do_sys_sendmsg net/socket.c:2505 [inline] __se_sys_sendmsg net/socket.c:2503 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2503 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0xffffffff85dee080 -> 0xffff88815d96ec00 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 13560 Comm: syz-executor.2 Not tainted 5.17.0-rc3-syzkaller-00116-gf1baf68e1383-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 470502de5bdb ("net: sched: unlock rules update API") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vlad Buslov <vladbu@mellanox.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-07-16 03:23:18 +0000