summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-02-04cfg80211: fix BSS list hidden SSID lookupJohannes Berg
When trying to find a hidden SSID, the lookup function is done wrong; the code is trying to combine the two lookups into one, and as a consequence doesn't always find the entry at all. To understand this, consider a case where multiple BSS entries with the same channel and BSSID exist but have different SSID length. Then comparing against the probe response SSID length is bound to cause problems since the hidden one might be either zeroed out or zero-length. To fix this we need to do two lookups for the two ways to hide SSIDs. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-04cfg80211: refactor hidden SSID findingJohannes Berg
Instead of duplicating the rbtree functions, pass an argument to the compare function. This removes the code duplication for the two searches. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-04cfg80211: expand per-station byte counters to 64bitVladimir Kondratiev
In per-station statistics, present 32bit counters are too small for practical purposes - with gigabit speeds, it get overlapped every few seconds. Expand counters in the struct station_info to be 64-bit. Driver can still fill only 32-bit and indicate in @filled only bits like STATION_INFO_[TR]X_BYTES; in case driver provides full 64-bit counter, it should also set in @filled bit STATION_INFO_[TR]RX_BYTES64 Netlink sends both 32-bit and 64-bit counters, if present, to not break userspace. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> [change to also have 32-bit counters if driver advertises 64-bit] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-04mac80211: always allow calling ieee80211_connection_loss()Johannes Berg
With multi-channel, there's a corner case where a driver doesn't receive a beacon soon enough to be able to sync its timers with the AP. In this case, the only recovery (after trying again) is to disconnect from the AP. Allow calling ieee80211_connection_loss() for such cases. To make that possible, modify the work function to not rely on the IEEE80211_HW_CONNECTION_MONITOR flag but use new state kept in the interface instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-04mac80211: send deauth when connection is lostJohannes Berg
If the driver determines the connection is lost, send a deauth frame to the AP anyway just in case it still considers the connection alive. The frame might not go through, but at least we've tried. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-03NFC: microread: Add i2c physical layerSamuel Ortiz
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-03NFC: Initial support for Inside Secure microreadEric Lapuyade
Inside Secure microread is an HCI based NFC chipset. This initial support includes reader and p2p (Target and initiator) modes. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-01rtlwifi: rtl8723ae: Fix W=1 compile warningsLarry Finger
Whe this driver is built with "make W=1", the following warnings are output: drivers/net/wireless/rtlwifi/rtl8723ae/fw.c:515:5: warning: variable ‘own’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/hal_btc.c:1436:5: warning: variable ‘bt_retry_cnt’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/hw.c:706:6: warning: variable ‘reg_ratr’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/hw.c:2033:41: warning: variable ‘cur_rfstate’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/phy.c:620:23: warning: variable ‘radiob_arraylen’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/phy.c:619:7: warning: variable ‘radiob_array_table’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/phy.c:617:7: warning: variable ‘rtstatus’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/phy.c:1534:6: warning: variable ‘bbvalue’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/phy.c:1716:6: warning: variable ‘reg_ecc’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/phy.c:1715:61: warning: variable ‘reg_ec4’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/phy.c:1715:34: warning: variable ‘reg_eac’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/rtl8723ae/trx.c:247:6: warning: variable ‘psaddr’ set but not used [-Wunused-but-set-variable] Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-01rtlwifi: rtl8192de: Fix W=1 build warningsLarry Finger
when this driver is built with "make W=1", the following warning is printed: drivers/net/wireless/rtlwifi/rtl8192de/dm.c:1058:5: warning: comparison is always false due to limited range of data type [-Wtype-limits] Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-01rtlwifi: rtl8192cu: Fix W=1 build warningLarry Finger
When this driver is built with "make W=1", the following warning is output: drivers/net/wireless/rtlwifi/rtl8192cu/sw.c:56:6: warning: variable ‘err’ set but not used [-Wunused-but-set-variable] Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-01rtlwifi: rtl8192c: Fix W=1 warningLarry Finger
When this driver is built with "make W=1", the following warning occurs: drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c:907:4: warning: comparison is always false due to limited range of data type [-Wtype-limits] Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-01rtlwifi: Fix warnings in usb.cLarry Finger
Building this driver with "make W=1" results in the following 2 warnings: drivers/net/wireless/rtlwifi/usb.c:829:21: warning: variable ‘urb_list’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/rtlwifi/usb.c:828:23: warning: variable ‘skb_list’ set but not used [-Wunused-but-set-variable] Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-01rtlwifi: Fix many compile warnings when using W=1Larry Finger
Many warnings like the following arise from a build with W=1 on the make line: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] Changing the overall debug level storage from unsigned to signed fixes these. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-01wireless: rt2x00: rt2800pci add idXose Vazquez Perez
0x1814,0x359f is a RT3592 802.11a/b/g/n 2x2 WiFi Adapter support added by 872834dfb38edc6f72cfc783a5ce78f2a9f36ec5 Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: users@rt2x00.serialmonkey.com Cc: linux-wireless@vger.kernel.org Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-01bcma: cc: fix (and rename) define of NAND flash typeRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-01ath9k: Remove unused variables in ath_mci_cleanupSven Eckelmann
Leaving the unused variables ath_mci_cleanup causes build warnings. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-01ath9k: Fix sparse __CHECK_ENDIAN__ for spectral codeSven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-01ath9k: Only remove spectral scan relay file when it was createdSven Eckelmann
The relay file depends on relayfs. Trying to close this file without having ATH9K_DEBUGFS (and therefore RELAY) activated causes build failures. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-01ath9k: Only add fix_rssi_inv_only when spectral code is usedSven Eckelmann
The code is only used when ATH9K_DEBUGFS is activated and causes build warnings when it is still compiled without user. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-01ath9k: Only process fft samples when ATH9K_DEBUGFS is enabledSven Eckelmann
The code can only be used when ATH9k_DEBUGFS is enabled an not when ATH_DEBUG is activated. Still enabling it would cause build failures. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-01ath9k: Select RELAY for ATH9K_DEBUGFSSven Eckelmann
The spectral scan support activated through ATH9K_DEBUGFS depends on RELAY for the kernel->userspace communication. Not activating RELAY causes build failures. The RELAY is added as select instead of depend to do it similar like the only other user of RELAY: BLK_DEV_IO_TRACE Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-01mwifiex: remove max_tx_buf_sizeBing Zhao
max_tx_buf_size is not used any more after reconfiguration of tx buffer size has been removed. Also add missing curr_tx_buf_size update while dumping debug info via debugfs. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-01mwifiex: do not reconfigure tx buffer size in firmware while associatingBing Zhao
It's observed that reconfiguration of tx buffer size before association can cause data path failure in firmware after associated. Although this is only found with PCIe cards, but potentially it could happen with any other interfaces as well. The tx buffer reconfiguration is not really useful in firmware. Let's remove it for all interfaces. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-01ath9k: report A-MPDU statusChristian Lamparter
The ath9k hardware reports whenever an frame was part of an A-MPDU. MAC80211 already provides the necessary API to pass this additional information along to whomever needs it. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-01wireless: rt2x00: rt2800usb add/identify idsXose Vazquez Perez
Devices were taken from Ralink Linux drivers: - RT5370 0x043e, 0x7a32 0x043e, 0x7a42 0x0471, 0x2126 0x0471, 0x2180 0x0471, 0x2181 0x0471, 0x2182 Identify these ones: 0x04da, 0x23f6 in CONFIG_RT2800USB_RT53XX is a Panasonic device 0x07d1, 0x3c17 in RT2800USB_UNKNOWN is a RT3070 0x0586, 0x341a in RT2800USB_UNKNOWN is a RT3070 Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: users@rt2x00.serialmonkey.com Cc: linux-wireless@vger.kernel.org Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-01iwlegacy: check for dma mapping errorsStanislaw Gruszka
Handle pci_map_page() errors. This fixes "DMA-API: device driver failed to check map error" warning. Reported-by: Zdenek Kabelac <zkabelac@redhat.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-01bcma: Xflash: reorder includes to make pr_fmt workRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-01iwl4965: report A-MPDU statusChristian Lamparter
This patch is based on "iwlwifi: report A-MPDU status". (12bf6f45d1703858) Since the firmware will give us an A-MPDU bit and only a single PHY information packet for all the subframes in an A-MPDU, we can easily report the minimal A-MPDU information for radiotap. Cc: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-01Merge branch 'for-upstream' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
2013-02-01Bluetooth: Refactor mgmt_pending_foreachAndre Guedes
This patch does a trivial refactor in mgmt_pending_foreach function. It replaces list_for_each_safe by list_for_each_entry_safe, simplifying the function. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-02-01Bluetooth: Remove unneeded lockingAndre Guedes
This patch removes unneeded locking in hci_le_adv_report_evt. There is no need to lock hdev before calling mgmt_device_found. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-02-01Bluetooth: Reduce critical section in sco_conn_readyAndre Guedes
This patch reduces the critical section protected by sco_conn_lock in sco_conn_ready function. The lock is acquired only when it is really needed. This patch fixes the following lockdep warning which is generated when the host terminates a SCO connection. Today, this warning is a false positive. There is no way those two threads reported by lockdep are running at the same time since hdev->workqueue (where rx_work is queued) is single-thread. However, if somehow this behavior is changed in future, we will have a potential deadlock. ====================================================== [ INFO: possible circular locking dependency detected ] 3.8.0-rc1+ #7 Not tainted ------------------------------------------------------- kworker/u:1H/1018 is trying to acquire lock: (&(&conn->lock)->rlock){+.+...}, at: [<ffffffffa0033ba6>] sco_chan_del+0x66/0x190 [bluetooth] but task is already holding lock: (slock-AF_BLUETOOTH-BTPROTO_SCO){+.+...}, at: [<ffffffffa0033d5a>] sco_conn_del+0x8a/0xe0 [bluetooth] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (slock-AF_BLUETOOTH-BTPROTO_SCO){+.+...}: [<ffffffff81083011>] lock_acquire+0xb1/0xe0 [<ffffffff813efd01>] _raw_spin_lock+0x41/0x80 [<ffffffffa003436e>] sco_connect_cfm+0xbe/0x350 [bluetooth] [<ffffffffa0015d6c>] hci_event_packet+0xd3c/0x29b0 [bluetooth] [<ffffffffa0004583>] hci_rx_work+0x133/0x870 [bluetooth] [<ffffffff8104d65f>] process_one_work+0x2bf/0x4f0 [<ffffffff81050022>] worker_thread+0x2b2/0x3e0 [<ffffffff81056021>] kthread+0xd1/0xe0 [<ffffffff813f14bc>] ret_from_fork+0x7c/0xb0 -> #0 (&(&conn->lock)->rlock){+.+...}: [<ffffffff81082215>] __lock_acquire+0x1465/0x1c70 [<ffffffff81083011>] lock_acquire+0xb1/0xe0 [<ffffffff813efd01>] _raw_spin_lock+0x41/0x80 [<ffffffffa0033ba6>] sco_chan_del+0x66/0x190 [bluetooth] [<ffffffffa0033d6d>] sco_conn_del+0x9d/0xe0 [bluetooth] [<ffffffffa0034653>] sco_disconn_cfm+0x53/0x60 [bluetooth] [<ffffffffa000fef3>] hci_disconn_complete_evt.isra.54+0x363/0x3c0 [bluetooth] [<ffffffffa00150f7>] hci_event_packet+0xc7/0x29b0 [bluetooth] [<ffffffffa0004583>] hci_rx_work+0x133/0x870 [bluetooth] [<ffffffff8104d65f>] process_one_work+0x2bf/0x4f0 [<ffffffff81050022>] worker_thread+0x2b2/0x3e0 [<ffffffff81056021>] kthread+0xd1/0xe0 [<ffffffff813f14bc>] ret_from_fork+0x7c/0xb0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(slock-AF_BLUETOOTH-BTPROTO_SCO); lock(&(&conn->lock)->rlock); lock(slock-AF_BLUETOOTH-BTPROTO_SCO); lock(&(&conn->lock)->rlock); *** DEADLOCK *** 4 locks held by kworker/u:1H/1018: #0: (hdev->name#2){.+.+.+}, at: [<ffffffff8104d5f8>] process_one_work+0x258/0x4f0 #1: ((&hdev->rx_work)){+.+.+.}, at: [<ffffffff8104d5f8>] process_one_work+0x258/0x4f0 #2: (&hdev->lock){+.+.+.}, at: [<ffffffffa000fbe9>] hci_disconn_complete_evt.isra.54+0x59/0x3c0 [bluetooth] #3: (slock-AF_BLUETOOTH-BTPROTO_SCO){+.+...}, at: [<ffffffffa0033d5a>] sco_conn_del+0x8a/0xe0 [bluetooth] stack backtrace: Pid: 1018, comm: kworker/u:1H Not tainted 3.8.0-rc1+ #7 Call Trace: [<ffffffff813e92f9>] print_circular_bug+0x1fb/0x20c [<ffffffff81082215>] __lock_acquire+0x1465/0x1c70 [<ffffffff81083011>] lock_acquire+0xb1/0xe0 [<ffffffffa0033ba6>] ? sco_chan_del+0x66/0x190 [bluetooth] [<ffffffff813efd01>] _raw_spin_lock+0x41/0x80 [<ffffffffa0033ba6>] ? sco_chan_del+0x66/0x190 [bluetooth] [<ffffffffa0033ba6>] sco_chan_del+0x66/0x190 [bluetooth] [<ffffffffa0033d6d>] sco_conn_del+0x9d/0xe0 [bluetooth] [<ffffffffa0034653>] sco_disconn_cfm+0x53/0x60 [bluetooth] [<ffffffffa000fef3>] hci_disconn_complete_evt.isra.54+0x363/0x3c0 [bluetooth] [<ffffffffa000fbd0>] ? hci_disconn_complete_evt.isra.54+0x40/0x3c0 [bluetooth] [<ffffffffa00150f7>] hci_event_packet+0xc7/0x29b0 [bluetooth] [<ffffffff81202e90>] ? __dynamic_pr_debug+0x80/0x90 [<ffffffff8133ff7d>] ? kfree_skb+0x2d/0x40 [<ffffffffa0021644>] ? hci_send_to_monitor+0x1a4/0x1c0 [bluetooth] [<ffffffffa0004583>] hci_rx_work+0x133/0x870 [bluetooth] [<ffffffff8104d5f8>] ? process_one_work+0x258/0x4f0 [<ffffffff8104d65f>] process_one_work+0x2bf/0x4f0 [<ffffffff8104d5f8>] ? process_one_work+0x258/0x4f0 [<ffffffff8104fdc1>] ? worker_thread+0x51/0x3e0 [<ffffffffa0004450>] ? hci_tx_work+0x800/0x800 [bluetooth] [<ffffffff81050022>] worker_thread+0x2b2/0x3e0 [<ffffffff8104fd70>] ? busy_worker_rebind_fn+0x100/0x100 [<ffffffff81056021>] kthread+0xd1/0xe0 [<ffffffff81055f50>] ? flush_kthread_worker+0xc0/0xc0 [<ffffffff813f14bc>] ret_from_fork+0x7c/0xb0 [<ffffffff81055f50>] ? flush_kthread_worker+0xc0/0xc0 Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-02-01Bluetooth: Increment Management interface revisionJohan Hedberg
This patch increments the management interface revision due to the various fixes, improvements and other changes that have gone in lately. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-02-01Bluetooth: Fix link security setting when powering onJohan Hedberg
If a controller is powered on while the HCI_AUTO_OFF flag is set the link security setting (HCI_LINK_SECURITY) might not be in sync with the actual state of the controller (HCI_AUTH). This patch fixes the issue by checking for inequality between the intended and actual settings and sends a HCI_Write_Auth_Enable command if necessary. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-02-01Bluetooth: Add support for 128-bit UUIDs in EIR dataJohan Hedberg
This patch adds the necessary code for encoding a list of 128-bit UUIDs into the EIR data. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-02-01Bluetooth: Add support for 32-bit UUIDs in EIR dataJohan Hedberg
This patch adds the necessary code for inserting a list of 32-bit UUIDs into the EIR data. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-02-01Bluetooth: Refactor UUID-16 list generation into its own functionJohan Hedberg
We will need to create three separate UUID lists in the EIR data (for 16, 32 and 128 bit UUIDs) so the code is easier to follow if each list is generated in their own function. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-02-01Bluetooth: Remove useless eir_len variable from EIR creationJohan Hedberg
The amount of data encoded so far in the create_eir() function can be calculated simply through the difference between the data and ptr pointer variables. The eir_len variable then becomes essentially useless. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-02-01Bluetooth: Simplify UUID16 list generation for EIRJohan Hedberg
There's no need to use two separate loops to generate a UUID list for the EIR data. This patch merges the two loops previously used for the 16-bit UUID list generation into a single loop, thus simplifying the code a great deal. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-02-01Bluetooth: Simplify UUID removal codeJohan Hedberg
The UUID removal code can be simplified by using list_for_each_entry_safe instead of list_for_each_safe. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-02-01Bluetooth: Keep track of UUID type upon additionJohan Hedberg
The primary purpose of the UUIDs is to enable generation of EIR and AD data. In these data formats the UUIDs are split into separate fields based on whether they're 16, 32 or 128 bit UUIDs. To make the generation of these data fields simpler this patch adds a type member to the bt_uuid struct and assigns a value to it as soon as the UUID is added to the kernel. This way the type doesn't need to be calculated each time the UUID list is later iterated. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-02-01Bluetooth: Simplify UUIDs clearing codeJohan Hedberg
The code for clearing the UUIDs list can be simplified by using list_for_each_entry_safe instead of list_for_each_safe. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-02-01Bluetooth: Store UUIDs in the same order that they were addedJohan Hedberg
We should be encoding UUIDs to the EIR data in the same order that they were added to the kernel, i.e. each UUID should be added to the end of the UUIDs list. This patch fixes the issue by using list_add_tail instead of list_add for storing the UUIDs. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-02-01iwlwifi: move register access lock into transportLilach Edelstein
Move the reg_lock that protects HW register access into the transport implementation. Locking is no longer exposed, but handled internally in grab and release NIC access. This simplifies the users. Signed-off-by: Lilach Edelstein <lilach.edelstein@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-01iwlwifi: add iwl_set_bits_mask to transport APILilach Edelstein
Express iwl_set_bit() and iwl_clear_bit() through iwl_set_bits_mask() and add the latter to the transport's API in order to allow different implementation for different transport types in the future. Signed-off-by: Lilach Edelstein <lilach.edelstein@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-01iwlwifi: lower BT coex aggregation message severityJohannes Berg
As the rate scaling algorithm will attempt to enable aggregation over and over again, the message will flood the log if there is, for example, Bluetooth streaming music. Make it a debug messages instead of printing it all the time. Reported-by: Jan-Michael Brummer <jan.brummer@tabos.org> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-01iwlwifi: add the MVM driverJohannes Berg
Newer firmware revisions have a completely new firmware API. This is the new driver for this new API. I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Cc: Alexander Bondar <alexander.bondar@intel.com> Cc: Amit Beka <amit.beka@intel.com> Cc: Amnon Paz <amnonx.paz@intel.com> Cc: Assaf Krauss <assaf.krauss@intel.com> Cc: David Spinadel <david.spinadel@intel.com> Cc: Dor Shaish <dor.shaish@intel.com> Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: Eytan Lifshitz <eytan.lifshitz@intel.com> Cc: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-31Bluetooth: Fix hci_conn timeout routineAndre Guedes
If occurs a LE or SCO hci_conn timeout and the connection is already established (BT_CONNECTED state), the connection is not terminated as expected. This bug can be reproduced using l2test or scotest tool. Once the connection is established, kill l2test/scotest and the connection won't be terminated. This patch fixes hci_conn_disconnect helper so it is able to terminate LE and SCO connections, as well as ACL. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-01-31Bluetooth: Fix handling of unexpected SMP PDUsJohan Hedberg
The conn->smp_chan pointer can be NULL if SMP PDUs arrive at unexpected moments. To avoid NULL pointer dereferences the code should be checking for this and disconnect if an unexpected SMP PDU arrives. This patch fixes the issue by adding a check for conn->smp_chan for all other PDUs except pairing request and security request (which are are the first PDUs to come to initialize the SMP context). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> CC: stable@vger.kernel.org Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-01-31mac80211: improve latency and throughput while software scanningStanislaw Gruszka
Patch vastly improve latency while scanning. Slight throughput improvements were observed as well. Is intended for improve performance of voice and video applications, when scan is periodically requested by user space (i.e. default NetworkManager behaviour). Patch remove latency requirement based on PM_QOS_NETWORK_LATENCY, this value is 2000 seconds by default (i.e. approximately 0.5 hour !?!). Also remove listen interval requirement, which based on beaconing and depending on BSS parameters. It can make we stay off-channel for a second or more. Instead try to offer the best latency that we could, i.e. be off-channel no longer than PASSIVE channel scan time: 125 ms. That mean we will scan two ACTIVE channels and go back to on-channel, and one PASSIVE channel, and go back to on-channel. Patch also decrease PASSIVE channel scan time to about 110 ms. As drawback patch increase overall scan time. On my tests, when scanning both 2GHz and 5GHz bands, scanning time increase from 5 seconds up to 10 seconds. Since that increase happen only when we are associated, I think it can be acceptable. If eventually better scan time is needed for situations when we lose signal and quickly need to decide to which AP roam, additional scan flag or parameter can be introduced. I tested patch by doing: while true; do iw dev wlan0 scan; sleep 3; done > /dev/null and ping -i0.2 -c 1000 HOST on remote and local machine, results are as below: * Ping from local periodically scanning machine to AP: Unpatched: rtt min/avg/max/mdev = 0.928/24.946/182.135/36.873 ms Patched: rtt min/avg/max/mdev = 0.928/19.678/150.845/33.130 ms * Ping from remote machine to periodically scanning machine: Unpatched: rtt min/avg/max/mdev = 1.637/120.683/709.139/164.337 ms Patched: rtt min/avg/max/mdev = 1.807/26.893/201.435/40.284 ms Throughput measured by scp show following results. * Upload to periodically scanning machine: Unpatched: 3.9MB/s 03:15 Patched: 4.3MB/s 02:58 * Download from periodically scanning machine: Unpatched: 5.5MB/s 02:17 Patched: 6.2MB/s 02:02 Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit (git 2.34.1) at 2025-07-16 09:49:51 +0000