summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-05-14bpf: btf: fix the brackets of BTF_INT_OFFSET()Gary Lin
'VAL' should be protected by the brackets. v2: * Squash the fix for Documentation/bpf/btf.rst Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Signed-off-by: Gary Lin <glin@suse.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-05-14backlight: lm3630a: Add firmware node supportBrian Masney
Add fwnode support to the lm3630a driver and optionally allow configuring the label, default brightness level, and maximum brightness level. The two outputs can be controlled by bank A and B independently or bank A can control both outputs. If the platform data was not configured, then the driver defaults to enabling both banks. This patch changes the default value to disable both banks before parsing the firmware node so that just a single bank can be enabled if desired. There are no in-tree users of this driver. Driver was tested on a LG Nexus 5 (hammerhead) phone. Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Dan Murphy <dmurphy@ti.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14dt-bindings: backlight: Add lm3630a bindingsBrian Masney
Add new backlight bindings for the TI LM3630A dual-string white LED. Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14backlight: lm3630a: Return 0 on success in update_status functionsBrian Masney
lm3630a_bank_a_update_status() and lm3630a_bank_b_update_status() both return the brightness value if the brightness was successfully updated. Writing to these attributes via sysfs would cause a 'Bad address' error to be returned. These functions should return 0 on success, so let's change it to correct that error. Fixes: 28e64a68a2ef ("backlight: lm3630: apply chip revision") Signed-off-by: Brian Masney <masneyb@onstation.org> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14video: lcd: Remove useless BACKLIGHT_CLASS_DEVICE dependenciesAlexander Shiyan
This patch removes dependencies on BACKLIGHT_CLASS_DEVICE for items that are already placed under 'if BACKLIGHT_CLASS_DEVICE'. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: Use dev_get_drvdata() directlyKefeng Wang
Using dev_get_drvdata directly. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: cros_ec: Instantiate properly CrOS Touchpad MCU deviceEnric Balletbo i Serra
Support Touchpad MCU as a special of CrOS EC devices. The current Touchpad MCU is used on Eve Chromebook and used the same protocol as other CrOS EC devices. When a MCU has touchpad support (aka EC_FEATURE_TOUCHPAD), it is instantiated as a special CrOS EC device with device name 'cros_tp'. So regardless of the probing order between the actual cros_ec and cros_tp, the userspace and other kernel drivers should not confuse them. Signed-off-by: Wei-Ning Huang <wnhuang@google.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: cros_ec: Instantiate properly CrOS FP MCU deviceEnric Balletbo i Serra
Support Fingerprint MCU as a special of CrOS EC devices. The current FP MCU uses the same EC SPI protocol v3 as other CrOS EC devices on a SPI bus. When a MCU has fingerprint support (aka EC_FEATURE_FINGERPRINT), it is instantiated as a special CrOS EC device with device name 'cros_fp'. So regardless of the probing order between the actual cros_ec and cros_fp, the userspace and other kernel drivers should not confuse them. Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: cros_ec: Update the EC feature codesEnric Balletbo i Serra
Update the feature enum for the Chromebook Embedded Controller to the latest version. Some of these enums are still not used in the kernel but we might be also interested on have these enums up to date. Userspace can use them to query the features to the EC via the cros-ec character device. While here, also fix a typo in one comment in the enum. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: intel-lpss: Add Intel Comet Lake PCI IDsAndy Shevchenko
Intel Comet Lake has the same LPSS than Intel Cannon Lake. Add the new IDs to the list of supported devices. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Tested-by: Evan Green <evgreen@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: lochnagar: Add links to binding docs for sound and hwmonCharles Keepax
Lochnagar is an evaluation and development board for Cirrus Logic Smart CODEC and Amp devices. It allows the connection of most Cirrus Logic devices on mini-cards, as well as allowing connection of various application processor systems to provide a full evaluation platform. This driver supports the board controller chip on the Lochnagar board. Add links to the binding documents for the new sound and hardware monitor parts of the driver. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: ab8500-debugfs: Fix a typo ("deubgfs")Jonathan Neuschäfer
"debugfs" was misspelled. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: imx6sx: Add MQS register definition for iomuxc gprS.j. Wang
Add macros to define masks and bits for imx6sx MQS registers Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14dt-bindings: mfd: LMU: Fix lm3632 dt binding exampleDan Murphy
Fix the lm3632 dt binding examples as the LCM enable GPIOs are defined as enable GPIOs per the regulator/lm363x-regulator.txt bindings document. Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: intel_quark_i2c_gpio: Adjust IOT2000 matchingSu Bao Cheng
Since there are more IOT2040 variants with identical hardware but different asset tags, the asset tag matching should be adjusted to support them. For the board name "SIMATIC IOT2000", currently there are 2 types of hardware, IOT2020 and IOT2040. Both are identical regarding the intel_quark_i2c_gpio. In the future there will be no other devices with the "SIMATIC IOT2000" DMI board name but different hardware. So remove the asset tag matching from this driver. Signed-off-by: Su Bao Cheng <baocheng.su@siemens.com> Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: da9063: Fix OTP control register names to match datasheets for DA9063/63LSteve Twiss
Mismatch between what is found in the Datasheets for DA9063 and DA9063L provided by Dialog Semiconductor, and the register names provided in the MFD registers file. The changes are for the OTP (one-time-programming) control registers. The two naming errors are OPT instead of OTP, and COUNT instead of CONT (i.e. control). Cc: Stable <stable@vger.kernel.org> Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: tps65912-spi: Add missing of table registrationDaniel Gomez
MODULE_DEVICE_TABLE(of, <of_match_table> should be called to complete DT OF mathing mechanism and register it. Before this patch: modinfo drivers/mfd/tps65912-spi.ko | grep alias alias: spi:tps65912 After this patch: modinfo drivers/mfd/tps65912-spi.ko | grep alias alias: of:N*T*Cti,tps65912C* alias: of:N*T*Cti,tps65912 alias: spi:tps65912 Reported-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Daniel Gomez <dagmcr@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: axp20x: Add USB power supply mfd cell to AXP803Chen-Yu Tsai
The AXP803 has a VBUS power input. Its functionality is the same as the one found in the AXP813. Now that the axp20x_usb_power driver supports this variant, we can add an mfd cell for it to use it. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: sun6i-prcm: Fix build warning for non-OF configurationsArnd Bergmann
When CONFIG_OF is disabled, we get a harmless warning about an unused variable: drivers/mfd/sun6i-prcm.c: In function 'sun6i_prcm_probe': drivers/mfd/sun6i-prcm.c:151:22: error: unused variable 'np' [-Werror=unused-variable] Remove the variable and open-code the value in the only place it is used, so it can get left out as well without CONFIG_OF. Fixes: a05a2e7998ab ("mfd: sun6i-prcm: Allow to compile with COMPILE_TEST") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: intel-lpss: Set the device in reset state when initBinbin Wu
In virtualized setup, when system reboots due to warm reset interrupt storm is seen. Call Trace: <IRQ> dump_stack+0x70/0xa5 __report_bad_irq+0x2e/0xc0 note_interrupt+0x248/0x290 ? add_interrupt_randomness+0x30/0x220 handle_irq_event_percpu+0x54/0x80 handle_irq_event+0x39/0x60 handle_fasteoi_irq+0x91/0x150 handle_irq+0x108/0x180 do_IRQ+0x52/0xf0 common_interrupt+0xf/0xf </IRQ> RIP: 0033:0x76fc2cfabc1d Code: 24 28 bf 03 00 00 00 31 c0 48 8d 35 63 77 0e 00 48 8d 15 2e 94 0e 00 4c 89 f9 49 89 d9 4c 89 d3 e8 b8 e2 01 00 48 8b 54 24 18 <48> 89 ef 48 89 de 4c 89 e1 e8 d5 97 01 00 84 c0 74 2d 48 8b 04 24 RSP: 002b:00007ffd247c1fc0 EFLAGS: 00000293 ORIG_RAX: ffffffffffffffda RAX: 0000000000000000 RBX: 00007ffd247c1ff0 RCX: 000000000003d3ce RDX: 0000000000000000 RSI: 00007ffd247c1ff0 RDI: 000076fc2cbb6010 RBP: 000076fc2cded010 R08: 00007ffd247c2210 R09: 00007ffd247c22a0 R10: 000076fc29465470 R11: 0000000000000000 R12: 00007ffd247c1fc0 R13: 000076fc2ce8e470 R14: 000076fc27ec9960 R15: 0000000000000414 handlers: [<000000000d3fa913>] idma64_irq Disabling IRQ #27 To avoid interrupt storm, set the device in reset state before bringing out the device from reset state. Changelog v2: - correct the subject line by adding "mfd: " Signed-off-by: Binbin Wu <binbin.wu@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14platform/chrome: Add support for v1 of host sleep eventEvan Green
Add support in code for the new forms of the host sleep event. Detects the presence of this version of the command at runtime, and use whichever form the EC supports. At this time, always request the default timeout, and only report the failing response via a WARN_ONCE(). Future versions could accept the sleep parameter from outside the driver, and return the response information to usermode or elsewhere. Signed-off-by: Evan Green <evgreen@chromium.org> Reviewed-by: Rajat Jain <rajatja@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: cros_ec: Add host_sleep_event_v1 commandEvan Green
Introduce the command and response structures for the second revision of the host sleep event. These structures are part of a new EC change that enables detection of failure to enter S0ix. The EC waits a kernel-specified timeout (or a default amount of time) for the S0_SLP pin to change, and wakes the system if that change does not occur in time. Signed-off-by: Evan Green <evgreen@chromium.org> Reviewed-by: Rajat Jain <rajatja@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: cros_ec: Instantiate the CrOS USB PD logger driverEnric Balletbo i Serra
Add the cros-usbpd-logger driver for logging event data for the USB PD charger available in the Embedded Controller on ChromeOS systems. The logging feature is logically separate functionality from charge manager, hence is instantiated as a different driver. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Guenetr Roeck <linux@roeck-us.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: cs47l90: Make DAC_AEC_CONTROL_2 readableAjit Pandey
There is a second AEC loopback on cs47l90 so the registers for it should be readable. Signed-off-by: Ajit Pandey <ajit.pandey@cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: cs47l35: Make DAC_AEC_CONTROL_2 readableRichard Fitzgerald
There is a second AEC loopback on cs47l35 so the registers for it should be readable. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: syscon: atmel: Switch to SPDX license identifiersTudor Ambarus
Adopt the SPDX license identifiers to ease license compliance management. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: da9063: Remove platform_data supportWolfram Sang
There are no in-kernel users anymore, so remove this outdated interface. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Steve Twiss <stwiss.opensource@diasemi.com> Tested-by: Steve Twiss <stwiss.opensource@diasemi.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: da9063: Convert headers to SPDXWolfram Sang
Covnert the headers of the source and include files to SPDX. And fix some typos in the descriptions ("interrupt" instead of "I2C"). Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Steve Twiss <stwiss.opensource@diasemi.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: axp20x: Allow the AXP223 to be probed by I2CMaxime Ripard
The AXP223 can be used both using the RSB proprietary bus, or a more traditional I2C bus. The RSB is a faster bus and provides more features (like some integrity checks on the messages), so it's usually preferrable to use it, but since it's proprietary, when we want to use the PMIC in a multi-master setup, the i2c might make sense as well. Let's add that possibility. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: rk808: Remove the id_tableTony Xie
Remove the id_table because it's not used. Signed-off-by: Tony Xie <tony.xie@rock-chips.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: cros_ec: Instantiate properly CrOS ISH MCU deviceRushikesh S Kadam
Integrated Sensor Hub (ISH) is also a MCU running EC having feature bit EC_FEATURE_ISH. Instantiate it as a special CrOS EC device with device name 'cros_ish'. Signed-off-by: Rushikesh S Kadam <rushikesh.s.kadam@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14dt-bindings: mfd: Add bindings for SAM9X60 HLCD controllerClaudiu Beznea
Add new compatible string for the HLCD controller on SAM9X60 SoC. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: atmel-hlcdc: Add compatible for SAM9X60 HLCD controllerClaudiu Beznea
Add compatible for SAM9X60 HLCD controller. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: Kconfig: Pedantic formattingEnrico Weigelt, metux IT consult
Formatting of Kconfig files doesn't look so pretty, so let the Great White Handkerchief come around and clean it up. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: axp20x: Add USB power supply mfd cell to AXP813Quentin Schulz
The AXP813 has a VBUS power input. Now that the axp20x_usb_power driver supports this variant, we can add an mfd cell for it to use it. Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> [wens@csie.org: add commit message] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: twl6040: Fix device init errors for ACCCTL registerTony Lindgren
I noticed that we can get a -EREMOTEIO errors on at least omap4 duovero: twl6040 0-004b: Failed to write 2d = 19: -121 And then any following register access will produce errors. There 2d offset above is register ACCCTL that gets written on twl6040 powerup. With error checking added to the related regcache_sync() call, the -EREMOTEIO error is reproducable on twl6040 powerup at least duovero. To fix the error, we need to wait until twl6040 is accessible after the powerup. Based on tests on omap4 duovero, we need to wait over 8ms after powerup before register write will complete without failures. Let's also make sure we warn about possible errors too. Note that we have twl6040_patch[] reg_sequence with the ACCCTL register configuration and regcache_sync() will write the new value to ACCCTL. Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: syscon: Add optional clock supportFabrice Gasnier
Some system control registers need to be clocked, so the registers can be accessed. Add an optional clock and attach it to regmap. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14dt-bindings: stm32: syscon: Add clock supportFabrice Gasnier
STM32 system configuration controller registers needs to be clocked. Document clock support on stm32-syscon. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: sec: Add support for the RTC on S2MPA01Stuart Menefy
The RTC portion of the S2MPA01 appears to have the same register layout as the S2MPS14. Signed-off-by: Stuart Menefy <stuart.menefy@mathembedded.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: sec: Put one element structure initialisation on one lineStuart Menefy
Change the layout of the initialisation of structures with one element to a single line of code. This keeps the coding style consistent. Signed-off-by: Stuart Menefy <stuart.menefy@mathembedded.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: intel_soc_pmic_chtwc: Register LED child deviceYauhen Kharuzhy
Add MFD cell for LEDs driver to the Intel Cherry Trail Whiskey Cove PMIC mfd device driver. Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14Merge branches 'ib-mfd-arm-leds-5.2', 'ib-mfd-gpio-input-leds-power-5.2', ↵Lee Jones
'ib-mfd-pinctrl-5.2-2' and 'ib-mfd-regulator-5.2', tag 'ib-mfd-arm-net-5.2' into ibs-for-mfd-merged Immutable branch between MFD, ARM and Net due for the 5.2 merge window
2019-05-13Merge branch 'pci/trivial'Bjorn Helgaas
- Cleanup PCI register definitions, typos, etc (Bjorn Helgaas) - Remove unnecessary use of user-space types in CPER (Bjorn Helgaas) - Cleanup setup-bus.c comments & whitespace (Nicholas Johnson) * pci/trivial: PCI: Cleanup setup-bus.c comments and whitespace CPER: Remove unnecessary use of user-space types CPER: Add UEFI spec references PCI: Fix comment typos PCI: Cleanup register definition width and whitespace # Conflicts: # drivers/pci/pci.c # drivers/pci/setup-bus.c
2019-05-13Merge branch 'pci/printk-portdrv'Bjorn Helgaas
- Change some desirable KERN_DEBUG messages to KERN_INFO/KERN_ERR (Frederick Lawler) - Log PCIe port service messages with pci_dev, not the pcie_device (Frederick Lawler) - Convert pciehp from pciehp_debug module parameter to generic dynamic debug (Frederick Lawler) * pci/printk-portdrv: PCI: pciehp: Remove pointless MY_NAME definition PCI: pciehp: Remove pointless PCIE_MODULE_NAME definition PCI: pciehp: Remove unused dbg/err/info/warn() wrappers PCI: pciehp: Log messages with pci_dev, not pcie_device PCI: pciehp: Replace pciehp_debug module param with dyndbg PCI: pciehp: Remove pciehp_debug uses PCI/AER: Log messages with pci_dev, not pcie_device PCI/DPC: Log messages with pci_dev, not pcie_device PCI/PME: Replace dev_printk(KERN_DEBUG) with dev_info() PCI/AER: Replace dev_printk(KERN_DEBUG) with dev_info()
2019-05-13Merge branch 'pci/printk'Bjorn Helgaas
* pci/printk: PCI: Replace dev_printk(KERN_DEBUG) with dev_info(), etc PCI: Replace printk(KERN_INFO) with pr_info(), etc PCI: Use dev_printk() when possible
2019-05-13Merge branch 'pci/iova-dma-ranges'Bjorn Helgaas
- Add list of legal DMA address ranges to PCI host bridge (Srinath Mannam) - Reserve inaccessible DMA ranges so IOMMU doesn't allocate them (Srinath Mannam) - Parse iProc DT dma-ranges to learn what PCI devices can reach via DMA (Srinath Mannam) * pci/iova-dma-ranges: PCI: iproc: Add sorted dma ranges resource entries to host bridge iommu/dma: Reserve IOVA for PCIe inaccessible DMA address PCI: Add dma_ranges window list # Conflicts: # drivers/pci/probe.c
2019-05-13Merge branch 'remotes/lorenzo/pci/misc'Bjorn Helgaas
- Exit pcitest with error code when test fails (Jean-Jacques Hiblot) - Fix leaked of_node references in dra7xx, uniphier, layerscape, rockchip, aardvark, iproc, mediatek, rpadlpar (Wen Yang) - Fix pcitest "help" option parsing (Kishon Vijay Abraham I) - Fix Makefile bug that inadvertently removes pcitest.sh (Kishon Vijay Abraham I) - Check for alloc_workqueue() failure in endpoint test driver (Kangjie Lu) * remotes/lorenzo/pci/misc: PCI: endpoint: Fix a potential NULL pointer dereference tools: PCI: Handle pcitest.sh independently from pcitest tools: PCI: Add 'h' in optstring of getopt() PCI: mediatek: Fix a leaked reference by adding missing of_node_put() PCI: iproc: Fix a leaked reference by adding missing of_node_put() PCI: aardvark: Fix a leaked reference by adding missing of_node_put() PCI: rockchip: Fix a leaked reference by adding missing of_node_put() PCI: dwc: layerscape: Fix a leaked reference by adding missing of_node_put() PCI: uniphier: Fix a leaked reference by adding missing of_node_put() PCI: dwc: pci-dra7xx: Fix a leaked reference by adding missing of_node_put() tools: PCI: Exit with error code when test fails
2019-05-13Merge branch 'remotes/lorenzo/pci/xilinx'Bjorn Helgaas
- Check for __get_free_pages() failure in xilinx (Kangjie Lu) * remotes/lorenzo/pci/xilinx: PCI: xilinx: Check for __get_free_pages() failure
2019-05-13Merge branch 'remotes/lorenzo/pci/tegra'Bjorn Helgaas
- Use DMA-API to get tegra MSI address to prevent device DMA from generating unwanted MSIs (Vidya Sagar) * remotes/lorenzo/pci/tegra: PCI: tegra: Use the DMA-API to get the MSI address
2019-05-13Merge branch 'remotes/lorenzo/pci/rockchip'Bjorn Helgaas
- Fix rockchip bitwise operations that overflow type (Colin Ian King) * remotes/lorenzo/pci/rockchip: PCI: rockchip: Fix rockchip_pcie_ep_assert_intx() bitwise operations
generated by cgit (git 2.34.1) at 2025-07-19 19:03:32 +0000