summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-02-15ARM: dts: wpcm450-supermicro-x9sci-ln4f: Add GPIO LEDs and buttonsJonathan Neuschäfer
The Supermicro X9SCi-LN4F server mainboard has a two LEDs and a button under the control of the BMC. This patch makes them accessible under Linux running on the BMC. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Link: https://lore.kernel.org/r/20220129115228.2257310-9-j.neuschaefer@gmx.net Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-02-15ARM: dts: wpcm450: Add pin functionsJonathan Neuschäfer
As done in nuvoton-common-npcm7xx.dtsi, this patch adds pinmux nodes for all pin functions to nuvoton-wpcm450.dtsi. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Link: https://lore.kernel.org/r/20220129115228.2257310-8-j.neuschaefer@gmx.net Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-02-15ARM: dts: wpcm450: Add pinctrl and GPIO nodesJonathan Neuschäfer
This patch adds the pin controller and GPIO banks to the devicetree for the WPCM450 SoC. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220129115228.2257310-7-j.neuschaefer@gmx.net Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-02-15ARM: dts: wpcm450: Add global control registers (GCR) nodeJonathan Neuschäfer
The Global Control Registers (GCR) are a block of registers in Nuvoton SoCs that expose misc functionality such as chip model and version information or pinmux settings. This patch adds a GCR node to nuvoton-wpcm450.dtsi in preparation for enabling pinctrl on this SoC. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Link: https://lore.kernel.org/r/20220129115228.2257310-4-j.neuschaefer@gmx.net Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-02-15MAINTAINERS: Match all of bindings/arm/npcm/ as part of NPCM architectureJonathan Neuschäfer
All files in Documentation/devicetree/bindings/arm/npcm/ belong to the Nuvoton NPCM architecture, even when their names might not spell it out explicitly. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Link: https://lore.kernel.org/r/20220129115228.2257310-3-j.neuschaefer@gmx.net Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-02-15dt-bindings: arm/npcm: Add binding for global control registers (GCR)Jonathan Neuschäfer
A nuvoton,*-gcr node is present in nuvoton-common-npcm7xx.dtsi and will be added to nuvoton-wpcm450.dtsi. It is necessary for the NPCM7xx and WPCM450 pinctrl drivers, and may later be used to retrieve SoC model and version information. This patch adds a binding to describe this node. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220129115228.2257310-2-j.neuschaefer@gmx.net Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-02-13ARM: dts: imx6dl: plym2m, prtvt7, victgo: add thermal zones and hwmonOleksij Rempel
Add thermal zones and hwmon connected to the ADC-touchscreen controller. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-02-13ARM: dts: imx6dl: plym2m, prtvt7, victgo: make use of new ↵Oleksij Rempel
resistive-adc-touch driver The tsc2046 is an ADC used as touchscreen controller. To share as mach code as possible, we should use it as actual ADC + virtual touchscreen controller. With this patch we make use of the new kernel IIO and HID infrastructure. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-02-13ARM: dts: imx6qdl-vicut1: add CAN termination supportOleksij Rempel
The gpio1 0 pin is controlling CAN termination, not USB H1 VBUS. So, remove wrong regulator and assign this gpio to new DT CAN termination property. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-02-13ARM: dts: imx6dl-prtvt7: Add missing tvp5150 video decoder nodeRobin van der Gracht
Add missing tvp5150 video decoder node to make composite video input work. Signed-off-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-02-13ARM: dts: imx6dl-prtvt7: Add display and panel nodesOleksij Rempel
Add Innolux G070Y2-T02 panel to the Protonic VT7 board. Signed-off-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-02-13arm64: dts: imx8mq-evk: Add second PCIe port supportRichard Zhu
Enable the second PCIe port support on i.MX8MQ EVK board. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-02-13ARM: dts: imx6qdl-mba6: Move pinmux to regulator nodeAlexander Stein
GPIO2_IO00 is used by reg_pcie, move the pinmuxing to this node as well. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-02-13ARM: dts: imx6qdl: tqma6: Remove obsolete commentAlexander Stein
This comment is not valid anymore. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-02-13ARM: dts: imx6qdl: tqma6: Mark gpio-buttons as wakeup-sourceAlexander Stein
They are connected directly to CPU, so they can be used as wakeup source. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-02-13ARM: dts: imx6qdl: tqma6: Add i2c bus recoveryAlexander Stein
Add the pinmuxing and GPIO settings for SCL/SDA for i2c1 & i2c3. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-02-13ARM: dts: imx6qdl-mba6: Move rtc alias to common locationAlexander Stein
The rtc alias is identical for both mba6a and mba6b. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-02-13dt-bindings: soc: add binding for i.MX8MP HSIO blk-ctrlLucas Stach
This adds the binding for the HSIO blk-ctrl on the i.MX8MP SoC. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-02-13dt-bindings: power: imx8mp: add defines for HSIO blk-ctrl domainsLucas Stach
This adds the defines for the power domains provided by the HSIO blk-ctrl on the i.MX8MP. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-02-13dt-bindings: power: add defines for i.MX8MP power domainLucas Stach
This adds the DT defines for the GPC power domains found on the i.MX8MP SoC. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-02-13ARM: dts: imx7: Move PCIe out of AIPS3Marek Vasut
The AIPS3 on iMX7 is at 0x30800000 and is 0x400000 long, the PCIe IP is not part of this AIPS range. Move it to /soc node. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: linux-imx@nxp.com Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-02-12ARM: dts: Drop serial 1 alias on GW7001Linus Walleij
The Gateaway 7001 has a serial port alias for serial1, this has proven detrimental on the WG302 so remove it on this machine as well. Drop in a small comment that this machine is based on IXP422. Cc: Zoltan HERPAI <wigyori@uid0.hu> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-02-12ARM: dts: ixp42x: Expand syscon register rangeLinus Walleij
We have at least 0x30 registers in the IXP42x syscon as register 0x2c is actively used to read platform features. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-02-12ARM: dts: ixp4xx: Fix up the Netgear WG302 device treeLinus Walleij
The version we can support (because of access to the hardware) is WG302v1, so rename the file and make the following modifications: - We have 32MB memory not 16MB - The default console speed is 9600 baud so use this - The device has no ATA disk nor USB so drop the /dev/sda1 default mount, this needs to mount ramdisk or NFS - Both serial0 and serial1 cannot be assigned with aliases, just assign serial0 - The Flash is just 8MB so augment the size - The Flash FIS index is at eraseblock 0x3f - The PHY is at MDIO address 30 Tested by bringing the Netgear WG302v1 up to userspace using initramfs appended to the kernel and downloaded over TFTP, then ifconfig to bring up eth0 and pinging the host. All works fine including SSH into the device from the host. Cc: Zoltan HERPAI <wigyori@uid0.hu> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-02-12ARM: dts: imx: Add missing LVDS decoder on M53MenloMarek Vasut
The M53Menlo display unit uses an LVDS-to-DPI bridge, TI DS90CF364A. Describe this bridge in DT, otherwise the DT incorrectly describes DPI panel attached directly to LVDS source. Fixes: 716be61d1869 ("ARM: dts: imx53: Add Menlosystems M53 board") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-02-12arm64: dts: imx8mm-beacon: Enable PCIeAdam Ford
The baseboard supports a PCIe slot with a 100MHz reference clock, but it's controlled by a different GPIO, so a gated clock is required. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-02-12arm64: dts: rockchip: Add Pine64 PineNote boardSamuel Holland
The PineNote is a tablet from Pine64 based on the RK3566 SoC, featuring 4G/128G of storage, a 10.3" electrophoretic display (EPD) with two-color frontlight, both EMR and capacitive digitizers, dual-band wireless, quad-channel digital microphones, and stereo speakers. There are two existing variants of the board. v1.1 was contained in some early samples, and v1.2 was sold as the "PineNote Developer Edition". Signed-off-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20220130053803.43660-3-samuel@sholland.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-02-12arm64: dts: rockchip: Add pdm node to rk356xSamuel Holland
rk356x contains a PDM microphone controller which is compatible with the existing rockchip,pdm binding. Add its node. Signed-off-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20220130053803.43660-2-samuel@sholland.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-02-12dt-bindings: arm: rockchip: Add Pine64 PineNote boardSamuel Holland
The PineNote is a tablet from Pine64 based on the RK3566 SoC. There are two existing variants of the board. v1.1 was contained in some early samples, and v1.2 was sold as the "PineNote Developer Edition". Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220130053803.43660-1-samuel@sholland.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-02-11ARM: dts: ux500: Correct Janice accel mount matrixLinus Walleij
The Z axis is actually correct: do not invert it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-02-11ARM: dts: ux500: Update AB850[05] nodesLinus Walleij
The new YAML device tree bindings gives new and proper names to several of the AB850[05] nodes and redefines the way we use numbering on PWMs to use reg. Update all the DTS nodes accordingly. Add the missing thermal node to the AB8505. Drop the debugfs nodes because these are not real devices. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-02-11ARM: dts: AB8505: Enable charging optionsLinus Walleij
These are not disabled on the AB8500 and after testing we see they work fine, so enable them on AB8505 too. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-02-11arm64: dts: rockchip: enable the tsadc on rk3568-evb1-v10Michael Riesch
Enable the thermal adc on the Rockchip RK3568 EVB1. Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20220209215549.94524-6-michael.riesch@wolfvision.net Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-02-11arm64: dts: rockchip: enable the gpu on rk3568-evb1-v10Michael Riesch
Enable the GPU core on the Rockchip RK3568 EVB1. Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net> [moved tsadc into a separate patch] Link: https://lore.kernel.org/r/20220209215549.94524-6-michael.riesch@wolfvision.net Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-02-11arm64: dts: rockchip: enable the gpu on quartz64-aEzequiel Garcia
Enable the GPU core on the Pine64 Quartz64 Model A. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Alex Bee <knaerzche@gmail.com> Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20220209215549.94524-5-michael.riesch@wolfvision.net Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-02-11arm64: dts: rockchip: add cooling map and trip points for gpu to rk356xAlex Bee
RK356x SoCs have a second thermal sensor for the GPU. This adds the cooling map and trip points for it to make use of its contribution as a cooling device. Signed-off-by: Alex Bee <knaerzche@gmail.com> Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20220209215549.94524-4-michael.riesch@wolfvision.net Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-02-11arm64: dts: rockchip: add gpu node to rk356xEzequiel Garcia
Rockchip SoCs RK3566 and RK3568 have a Mali Gondul core which is based on the Bifrost architecture. It has one shader core and two execution engines. Quoting the datasheet: Mali-G52 1-Core-2EE * Support 1600Mpix/s fill rate when 800MHz clock frequency * Support 38.4GLOPs when 800MHz clock frequency Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Alex Bee <knaerzche@gmail.com> Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20220209215549.94524-3-michael.riesch@wolfvision.net Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-02-11ARM: dts: mstar: Add board for 100ask DongShanPiOneDaniel Palmer
The DongShanPiOne is little SigmaStar SSD202D based module from 100ask. Add an initial dts for this board. Link: http://linux-chenxing.org/infinity2/dongshanpione/ Signed-off-by: Daniel Palmer <daniel@0x0f.com>
2022-02-11dt-bindings: arm: mstar: Add compatible for 100ask DongShanPiOneDaniel Palmer
The DongShanPiOne is a SigmaStar SSD202D based module. Add a compatible for it to the list of infinity2m boards. Link: http://linux-chenxing.org/infinity2/dongshanpione/ Signed-off-by: Daniel Palmer <daniel@0x0f.com> Acked-by: Rob Herring <robh@kernel.org>
2022-02-11dt-bindings: vendor-prefixes: Add prefix for 100askDaniel Palmer
100ask is Linux SBC/module/training provider. Add a prefix for them. Link: https://www.100ask.net Signed-off-by: Daniel Palmer <daniel@0x0f.com> Acked-by: Rob Herring <robh@kernel.org>
2022-02-11ARM: dts: mstar: Add a dts for Miyoo MiniDaniel Palmer
Miyoo has released a portable retro games machine based on the SigmaStar SSD202D. Add the initial device tree for this machine. Just enough to get to an initramfs shell. Link: http://linux-chenxing.org/infinity2/miyoomini/ Signed-off-by: Daniel Palmer <daniel@0x0f.com>
2022-02-11dt-bindings: arm: mstar: Add compatible for Miyoo MiniDaniel Palmer
The Miyoo Mini is a SigmaStar SSD202D based retro emulation device. Add a compatible for it to the list of infinity2m devices. Link: http://linux-chenxing.org/infinity2/miyoomini/ Signed-off-by: Daniel Palmer <daniel@0x0f.com> Acked-by: Rob Herring <robh@kernel.org>
2022-02-11dt-bindings: vendor-prefixes: Add prefix for MiyooDaniel Palmer
Add a prefix for "miyoo". The only details I can find about the company is their aliexpress store "miyoo global store": https://www.aliexpress.com/store/912663639 Signed-off-by: Daniel Palmer <daniel@0x0f.com> Acked-by: Rob Herring <robh@kernel.org>
2022-02-11ARM: dts: mstar: Add the Wireless Tag IDO-SBC2D06-V1B-22WRomain Perier
The Wireless Tag IDO-SBC2D06-V1B-22W[1] is an SBC powered by SSD202D with a dual Ethernet and a connector for a 4-inch and 7-inch display. It embeds a System-On-Module IDO-SOM2D01[2] with an Mstar SSD202 SoC dual-core Cortex-A7 CPU @ 1.2Ghz , 2D GPU, 128 MB DDR3 (on-chip) and a 256MB SPI NAND flash. This commit adds basic definition for this board. 1. http://linux-chenxing.org/infinity2/ido-sbc2d06 2. http://www.wireless-tag.com/portfolio/ido-som2d01 Signed-off-by: Romain Perier <romain.perier@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Daniel Palmer <daniel@0x0f.com>
2022-02-11dt-bindings: add vendor prefix for Wireless TagRomain Perier
This adds a vendor prefix for wireless tag boards and SOMs. Signed-off-by: Romain Perier <romain.perier@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Daniel Palmer <daniel@0x0f.com>
2022-02-11ARM: dts: mstar: Set gpio compatible for ssd20xdDaniel Palmer
Now there is gpio support for ssd20xd set the right compatible in the gpio node. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Reviewed-by: Romain Perier <romain.perier@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2022-02-11arm64: dts: freescale: add initial support for verdin imx8m miniMarcel Ziswiler
This patch adds the device tree to support Toradex Verdin iMX8M Mini a computer on module which can be used on different carrier boards. The module consists of an NXP i.MX 8M Mini family SoC (either i.MX 8M Mini Quad or 8M Mini DualLite), a PCA9450A PMIC, a Gigabit Ethernet PHY, 1 or 2 GB of LPDDR4 RAM, an eMMC, a TLA2024 ADC, an I2C EEPROM, an RX8130 RTC, an optional SPI CAN controller plus an optional Bluetooth/ Wi-Fi module. Anything that is not self-contained on the module is disabled by default. The device tree for the Dahlia includes the module's device tree and enables the supported peripherals of the carrier board. The device tree for the Verdin Development Board includes the module's device tree as well as the Dahlia one as it is a superset and supports almost all peripherals available. So far there is no display functionality supported at all but basic console UART, PCIe, USB host, eMMC and Ethernet and PCIe functionality work fine. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-02-11dt-bindings: arm: fsl: add toradex,verdin-imx8mm et al.Marcel Ziswiler
Add toradex,verdin-imx8mm for our new Verdin iMX8M Mini modules, its nonwifi and wifi variants and the carrier boards (both Dahlia and the Verdin Development Board) they may be mated in. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-02-11arm64: dts: imx8mp-evk: add PCA6416 interrupt controller modeHugo Villeneuve
Add interrupt controller mode for the pca6416 on i.MX8MP EVK board's. Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-02-11arm64: dts: freescale: Use overlay target for simplicityShawn Guo
With commit 15d16d6dadf6 ("kbuild: Add generic rule to apply fdtoverlay"), overlay target can be used to simplify the build of DTB overlays. It also performs a cross check to ensure base DT and overlay actually match. Signed-off-by: Shawn Guo <shawnguo@kernel.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
generated by cgit (git 2.34.1) at 2025-07-15 20:25:00 +0000