| Age | Commit message (Collapse) | Author |
|---|
|
Implement WoW enable and WoW wakeup commands which are needed
for suspend/resume.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240604055407.12506-3-quic_bqiang@quicinc.com
|
|
Currently there is no dedicated log level for WoW, so create it for future use.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240604055407.12506-2-quic_bqiang@quicinc.com
|
|
The Current method for advertising the maximum MBSSID interface count
assumes single radio per wiphy (multi wiphy model). However, this
assumption is incorrect for multi radio per wiphy (single wiphy model).
Therefore, populate the parameter for each radio present in the MAC
abstraction layer (ah). This approach ensure scalability for both single
wiphy and multi wiphy models.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Fixes: 519a545cfee7 ("wifi: ath12k: advertise driver capabilities for MBSSID and EMA")
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240613153813.3509837-1-quic_periyasa@quicinc.com
|
|
Currently, if the access point receives an association
request containing an Extended HE Capabilities Information
Element with an invalid MCS-NSS, it triggers a firmware
crash.
This issue arises when EHT-PHY capabilities shows support
for a bandwidth and MCS-NSS set for that particular
bandwidth is filled by zeros and due to this, driver obtains
peer_nss as 0 and sending this value to firmware causes
crash.
Address this issue by implementing a validation step for
the peer_nss value before passing it to the firmware. If
the value is greater than zero, proceed with forwarding
it to the firmware. However, if the value is invalid,
reject the association request to prevent potential
firmware crashes.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Ajith C <quic_ajithc@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240613053528.2541645-1-quic_ajithc@quicinc.com
|
|
capabilities
Currently SMPS configuration failed when the Information
Elements (IEs) did not contain HT or 6 GHz capabilities. This
caused legacy peer association to fail as legacy peers do not
have HT or 6 GHz capabilities. Fix this by not returning an
error when SMPS configuration fails due to the absence of HT
or 6 GHz capabilities.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Fixes: f0e61dc7ecf9 ("wifi: ath12k: refactor SMPS configuration")
Reported-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Reported-by: Zachary Smith <dr.z.smith@gmail.com>
Closes: https://lore.kernel.org/all/CAM=znoFPcXrn5GhDmDmo50Syic3-hXpWvD+vkv8KX5o_ZTo8kQ@mail.gmail.com/
Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
Reported-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240612225336.2303119-1-quic_pradeepc@quicinc.com
|
|
Smatch throws following errors
drivers/net/wireless/ath/ath12k/mac.c:1922 ath12k_peer_assoc_h_he() error: uninitialized symbol 'rx_mcs_80'.
drivers/net/wireless/ath/ath12k/mac.c:1922 ath12k_peer_assoc_h_he() error: uninitialized symbol 'rx_mcs_160'.
drivers/net/wireless/ath/ath12k/mac.c:1924 ath12k_peer_assoc_h_he() error: uninitialized symbol 'rx_mcs_80'.
In ath12k_peer_assoc_h_he() rx_mcs_80 and rx_mcs_160 variables
remain uninitialized in the following conditions:
1. Whenever the value of mcs_80 become equal to
IEEE80211_HE_MCS_NOT_SUPPORTED then rx_mcs_80 remains uninitialized.
2. Whenever phy capability is not supported 160 channel width and
value of mcs_160 become equal to IEEE80211_HE_MCS_NOT_SUPPORTED
then rx_mcs_160 remains uninitialized.
Initialize these variables during declaration.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1
Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240611031017.297927-3-quic_aarasahu@quicinc.com
|
|
Smatch throws below error
drivers/net/wireless/ath/ath12k/mac.c:8318 ath12k_mac_op_get_survey() error: we previously assumed 'sband' could be null
Currently, we access sband inside the null check of the sband
in ath12k_mac_op_get_survey().
Fix this issue by removing the entire if block, because decrement
idx is unnecessary since there are no more band to test.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Fixes: 70e3be54bbdd ("wifi: ath12k: fix survey dump collection in 6 GHz")
Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240611031017.297927-2-quic_aarasahu@quicinc.com
|
|
station mode
Currently, the calculation of the average signal strength in station mode
is incorrect.
This is because before calculating the average signal strength, ath11k need
to determine whether the hardware and firmware support db2dbm, if the
hardware and firmware support db2dbm, do not need to add noise floor,
otherwise, need to add noise floor.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23
Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240309121129.5379-1-quic_lingbok@quicinc.com
|
|
Currently, the calculation of ack signal strength is incorrect.
This is because before calculating the ack signal strength, ath11k need
to determine whether the hardware and firmware support db2dbm. If the
hardware and firmware support db2dbm, do not need to add noise floor,
otherwise, need to add noise floor.
Besides, the value of ack_rssi passed by firmware to ath11k should be a
signed number, so change its type to s8.
After that, "iw wlan0 station dump" show the correct ack signal strength.
Such as:
root@CDCCSTEX0799733-LIN:~# iw wlp88s0 station dump
Station 00:03:7f:12:df:df (on wlp88s0)
inactive time: 75 ms
rx bytes: 11599
rx packets: 99
tx bytes: 9029
tx packets: 81
tx retries: 4
tx failed: 0
rx drop misc: 2
signal: -16 dBm
signal avg: -24 dBm
tx bitrate: 1560.0 MBit/s VHT-MCS 9 80MHz VHT-NSS 4
tx duration: 9230 us
rx bitrate: 1560.0 MBit/s VHT-MCS 9 80MHz VHT-NSS 4
rx duration: 7201 us
last ack signal:-23 dBm
avg ack signal: -22 dBm
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240611022550.59078-1-quic_lingbok@quicinc.com
|
|
Currently, device (ab) reference in hardware abstraction (ah)
is not used anywhere. Also, with multiple device group abstraction,
hardware abstraction would be coupled with device group abstraction
rather than single device.
Hence, remove the ab reference from hardware abstraction.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240529060939.4156281-1-quic_hprem@quicinc.com
|
|
Whenever firmware is crashed in split-phy below WARN_ON() triggered:
WARNING: CPU: 3 PID: 82 at net/mac80211/driver-ops.c:41 drv_stop+0xac/0xbc
Modules linked in: ath12k qmi_helpers
CPU: 3 PID: 82 Comm: kworker/3:2 Tainted: G D W 6.9.0-next-20240520-00113-gd981a3784e15 #39
Hardware name: Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C9 (DT)
Workqueue: events_freezable ieee80211_restart_work
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : drv_stop+0xac/0xbc
lr : ieee80211_stop_device+0x54/0x64
sp : ffff8000848dbb20
x29: ffff8000848dbb20 x28: 0000000000000790 x27: ffff000014d78900
x26: ffff000014d791f8 x25: ffff000007f0d9b0 x24: 0000000000000018
x23: 0000000000000001 x22: 0000000000000000 x21: ffff000014d78e10
x20: ffff800081dc0000 x19: ffff000014d78900 x18: ffffffffffffffff
x17: ffff7fffbca84000 x16: ffff800083fe0000 x15: ffff800081dc0b48
x14: 0000000000000076 x13: 0000000000000076 x12: 0000000000000001
x11: 0000000000000000 x10: 0000000000000a60 x9 : ffff8000848db980
x8 : ffff000000dddfc0 x7 : 0000000000000400 x6 : ffff800083b012d8
x5 : ffff800083b012d8 x4 : 0000000000000000 x3 : ffff000014d78398
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000014d78900
Call trace:
drv_stop+0xac/0xbc
ieee80211_stop_device+0x54/0x64
ieee80211_do_stop+0x5a0/0x790
ieee80211_stop+0x4c/0x178
__dev_close_many+0xb0/0x150
dev_close_many+0x88/0x130
dev_close.part.171+0x44/0x74
dev_close+0x1c/0x28
cfg80211_shutdown_all_interfaces+0x44/0xfc
ieee80211_restart_work+0xfc/0x14c
process_scheduled_works+0x18c/0x2dc
worker_thread+0x13c/0x314
kthread+0x118/0x124
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
The warning in question is from drv_stop():
if (WARN_ON(!local->started))
return;
The sequence of WARN_ON() is:
Thread 1:
-Firmware crash calls ath12k_core_reset().
-Call ieee80211_restart_hw() inside
ath12k_core_post_reconfigure_recovery() which schedules worker
for both hardware.
-Wait for completion of ab->recovery_start.
Thread 2 (worker thread):
-One hardware acquires rtnl_lock() inside ieee80211_restart_hw() and
calls ath12k_mac_wait_reconfigure() into ath12k_mac_op_start().
-Hardware is waiting for ab->reconfigure_complete but at this time
recovery_start_count value is 1 because another worker thread
(local->restart_work) is still waiting for rtnl_lock().
recovery_start_count is not equal to number of radios
(2 in split-phy). So ab->recovery_start complete does not set
due to this, thread 1 is still waiting and not able to perform
hif power down up and firmware reload.
-Wait timeout happens for ab->reconfigure_complete and comeback
to caller (ath12k_mac_op_start()) and sends WMI command to
crashed firmware and gets error.
-This returns error to drv_start() and local->started is set to false.
-Hardware calls cfg80211_shutdown_all_interfaces() after receiving error
inside ieee80211_restart_work() and goes to drv_stop(), here we trigger
WARN_ON as local->started is false.
To fix this issue call ieee80211_restart_hw() after firmware has been
reloaded. Now, each hardware can send WMI command to firmware
successfully. With this fix we don't need to wait for
ab->recovery_start completion so remove
ath12k_mac_wait_reconfigure().
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00209-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 HW2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240529034405.2863150-1-quic_aarasahu@quicinc.com
|
|
Add device-tree bindings for the ATH12K module found in the WCN7850
package.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240605122106.23818-3-brgl@bgdev.pl
|
|
Add a PCI compatible for the ATH11K module on QCA6390 and describe the
power inputs from the PMU that it consumes.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240605122106.23818-2-brgl@bgdev.pl
|
|
Whenever per pdev debugfs directory is created, a symlink to it is also
placed in ieee80211/phy* directory. During clean up of per pdev debugfs,
this symlink also needs to be cleaned up.
Add changes to clean up the symlink whenever the per pdev debugfs is
removed.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240529043043.2488031-4-quic_adisi@quicinc.com
|
|
During normal de-initialization path or if any error happens while
registering the hardware, there is no support to unregister the per pdev
debugfs. Add support for the same.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240529043043.2488031-3-quic_adisi@quicinc.com
|
|
Function ath12k_debugfs_register() is called once inside the function
ath12k_mac_hw_register(). However, with single wiphy model, there could
be multiple pdevs registered under single hardware. Hence, need to register
debugfs for each one of them.
Move the caller inside the loop which iterates over all underlying pdevs.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Fixes: f8bde02a26b9 ("wifi: ath12k: initial debugfs support")
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240529043043.2488031-2-quic_adisi@quicinc.com
|
|
Currently for CCMP256, GCMP128 and GCMP256 ciphers, in ath11k_install_key()
IEEE80211_KEY_FLAG_GENERATE_IV_MGMT is not set. And in ath11k_mac_mgmt_tx_wmi()
a length of IEEE80211_CCMP_MIC_LEN is reserved for all ciphers.
This results in unexpected management frame drop in case either of above 3 ciphers
is used. The reason is, without IEEE80211_KEY_FLAG_GENERATE_IV_MGMT set, mac80211
will not generate CCMP/GCMP headers in frame for ath11k. Also MIC length reserved
is wrong. Such frame is dropped later by hardware:
ath11k_pci 0000:5a:00.0: mac tx mgmt frame, buf id 0
ath11k_pci 0000:5a:00.0: mgmt tx compl ev pdev_id 1, desc_id 0, status 1
From user point of view, we have observed very low throughput due to this issue:
action frames are all dropped so ADDBA response from DUT never reaches AP. AP
can not use aggregation thus throughput is low.
Fix this by setting IEEE80211_KEY_FLAG_GENERATE_IV_MGMT flag and by reserving proper
MIC length for those ciphers.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Reported-by: Yaroslav Isakov <yaroslav.isakov@gmail.com>
Tested-by: Yaroslav Isakov <yaroslav.isakov@gmail.com>
Closes: https://lore.kernel.org/all/CADS+iDX5=JtJr0apAtAQ02WWBxgOFEv8G063vuGYwDTC8AVZaw@mail.gmail.com
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240605014826.22498-1-quic_bqiang@quicinc.com
|
|
Currently, in the Rx error processing handler, once an MSDU drop is
detected, the subsequent MSDUs get unintentionally dropped due to the
previous drop flag being retained across all MSDU processing, leading
to the discarding of valid MSDUs. To resolve this issue, the drop flag
should be reset to false before processing each descriptor.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240604062641.2956288-1-quic_periyasa@quicinc.com
|
|
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_event_timeout() causing patterns like:
timeout = wait_event_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Fix to the proper variable type 'long' while here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240603091541.8367-2-wsa+renesas@sang-engineering.com
|
|
Current documentation on RCU in ath11k_mac_op_ipv6_changed() says:
/* Note: read_lock_bh() calls rcu_read_lock() */
read_lock_bh(&idev->lock);
This is wrong because without enabling CONFIG_PREEMPT_RT
rcu_read_lock() is not called by read_lock_bh(). The reason
why current code works even in a CONFIG_PREEMPT_RT=n kernel
is because atomic_notifier_call_chain() already does that for
us, see:
int atomic_notifier_call_chain()
{
...
rcu_read_lock();
ret = notifier_call_chain(&nh->head, val, v, -1, NULL);
rcu_read_unlock();
...
}
and backtrace:
ath11k_mac_op_ipv6_changed
ieee80211_ifa6_changed
notifier_call_chain
atomic_notifier_call_chain
So update the comment to make it correct.
This is found during code review, compile tested only.
Fixes: feafe59c8975 ("wifi: ath11k: use RCU when accessing struct inet6_dev::ac_list")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240531022411.6543-1-quic_bqiang@quicinc.com
|
|
Currently ACPI notification handler is installed when driver loads and only
gets removed when driver unloads. During resume after firmware is reloaded,
ath12k tries to install it by default. Since it is installed already, ACPI
subsystem rejects it and returns an error:
[ 83.094206] ath12k_pci 0000:03:00.0: failed to install DSM notify callback: 7
Fix it by removing that handler when going to suspend. This also avoid any
possible ACPI call to firmware before firmware is reloaded/reinitialized.
Note ab->acpi also needs to be cleared in ath12k_acpi_stop() such that we
are in a clean state when ACPI structures are reinitialized in
ath12k_acpi_start().
Tested-on: WCN7850 HW2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Fixes: 576771c9fa21 ("wifi: ath12k: ACPI TAS support")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240531024000.9291-1-quic_bqiang@quicinc.com
|
|
When multiple radios are advertised as a single wiphy which supports various
bands, vdev creation for the vif is deferred until channel is assigned to it.
If a remain on channel (RoC) request is received from mac80211, select the
corresponding radio (ar) based on channel and create a vdev on that radio to
initiate an RoC scan.
Note that on RoC completion this vdev is not deleted. If a new RoC/hw scan
request is seen on that same vif for a different band the vdev will be deleted
and created on the new radio supporting the request.
Also if the RoC scan is requested when the vdev is in started state, no
switching to new radio is allowed and RoC request can be accepted only on
channels within same radio.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240528082739.1226758-1-quic_ramess@quicinc.com
|
|
Jacob Keller says:
====================
Intel Wired LAN Driver Updates 2024-06-03
This series includes miscellaneous improvements for the ice as well as a
cleanup to the Makefiles for all Intel net drivers.
Andy fixes all of the Intel net driver Makefiles to use the documented
'*-y' syntax for specifying object files to link into kernel driver
modules, rather than the '*-objs' syntax which works but is documented as
reserved for user-space host programs.
Jacob has a cleanup to refactor rounding logic in the ice driver into a
common roundup_u64 helper function.
Michal Schmidt replaces irq_set_affinity_hint() to use
irq_update_affinity_hint() which behaves better with user-applied affinity
settings.
v2: https://lore.kernel.org/r/20240605-next-2024-06-03-intel-next-batch-v2-0-39c23963fa78@intel.com
v1: https://lore.kernel.org/r/20240603-next-2024-06-03-intel-next-batch-v1-0-e0523b28f325@intel.com
====================
Link: https://lore.kernel.org/r/20240607-next-2024-06-03-intel-next-batch-v3-0-d1470cee3347@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
irq_set_affinity_hint() is deprecated. Use irq_update_affinity_hint()
instead. This removes the side-effect of actually applying the affinity.
The driver does not really need to worry about spreading its IRQs across
CPUs. The core code already takes care of that.
On the contrary, when the driver applies affinities by itself, it breaks
the users' expectations:
1. The user configures irqbalance with IRQBALANCE_BANNED_CPULIST in
order to prevent IRQs from being moved to certain CPUs that run a
real-time workload.
2. ice reconfigures VSIs at runtime due to a MIB change
(ice_dcb_process_lldp_set_mib_change). Reopening a VSI resets the
affinity in ice_vsi_req_irq_msix().
3. ice has no idea about irqbalance's config, so it may move an IRQ to
a banned CPU. The real-time workload suffers unacceptable latency.
I am not sure if updating the affinity hints is at all useful, because
irqbalance ignores them since 2016 ([1]), but at least it's harmless.
This ice change is similar to i40e commit d34c54d1739c ("i40e: Use
irq_update_affinity_hint()").
[1] https://github.com/Irqbalance/irqbalance/commit/dcc411e7bfdd
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Sunil Goutham <sgoutham@marvell.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240607-next-2024-06-03-intel-next-batch-v3-3-d1470cee3347@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In ice_ptp_cfg_clkout(), the ice driver needs to calculate the nearest next
second of a current time value specified in nanoseconds. It implements this
using div64_u64, because the time value is a u64. It could use div_u64
since NSEC_PER_SEC is smaller than 32-bits.
Ideally this would be implemented directly with roundup(), but that can't
work on all platforms due to a division which requires using the specific
macros and functions due to platform restrictions, and to ensure that the
most appropriate and fast instructions are used.
The kernel doesn't currently provide any 64-bit equivalents for doing
roundup. Attempting to use roundup() on a 32-bit platform will result in a
link failure due to not having a direct 64-bit division.
The closest equivalent for this is DIV64_U64_ROUND_UP, which does a
division always rounding up. However, this only computes the division, and
forces use of the div64_u64 in cases where the divisor is a 32bit value and
could make use of div_u64.
Introduce DIV_U64_ROUND_UP based on div_u64, and then use it to implement
roundup_u64 which takes a u64 input value and a u32 rounding value.
The name roundup_u64 matches the naming scheme of div_u64, and future
patches could implement roundup64_u64 if they need to round by a multiple
that is greater than 32-bits.
Replace the logic in ice_ptp.c which does this equivalent with the newly
added roundup_u64.
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240607-next-2024-06-03-intel-next-batch-v3-2-d1470cee3347@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240607-next-2024-06-03-intel-next-batch-v3-1-d1470cee3347@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/hardware/mISDN/hfcpci.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/hardware/mISDN/hfcmulti.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/hardware/mISDN/hfcsusb.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/hardware/mISDN/avmfritz.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/hardware/mISDN/speedfax.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/hardware/mISDN/mISDNinfineon.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/hardware/mISDN/w6692.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/hardware/mISDN/netjet.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/hardware/mISDN/mISDNipac.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/hardware/mISDN/mISDNisar.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/mISDN/mISDN_core.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/mISDN/mISDN_dsp.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/isdn/mISDN/l1oip.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240607-md-drivers-isdn-v1-1-81fb7001bc3a@quicinc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-06-06
We've added 54 non-merge commits during the last 10 day(s) which contain
a total of 50 files changed, 1887 insertions(+), 527 deletions(-).
The main changes are:
1) Add a user space notification mechanism via epoll when a struct_ops
object is getting detached/unregistered, from Kui-Feng Lee.
2) Big batch of BPF selftest refactoring for sockmap and BPF congctl
tests, from Geliang Tang.
3) Add BTF field (type and string fields, right now) iterator support
to libbpf instead of using existing callback-based approaches,
from Andrii Nakryiko.
4) Extend BPF selftests for the latter with a new btf_field_iter
selftest, from Alan Maguire.
5) Add new kfuncs for a generic, open-coded bits iterator,
from Yafang Shao.
6) Fix BPF selftests' kallsyms_find() helper under kernels configured
with CONFIG_LTO_CLANG_THIN, from Yonghong Song.
7) Remove a bunch of unused structs in BPF selftests,
from David Alan Gilbert.
8) Convert test_sockmap section names into names understood by libbpf
so it can deduce program type and attach type, from Jakub Sitnicki.
9) Extend libbpf with the ability to configure log verbosity
via LIBBPF_LOG_LEVEL environment variable, from Mykyta Yatsenko.
10) Fix BPF selftests with regards to bpf_cookie and find_vma flakiness
in nested VMs, from Song Liu.
11) Extend riscv32/64 JITs to introduce shift/add helpers to generate Zba
optimization, from Xiao Wang.
12) Enable BPF programs to declare arrays and struct fields with kptr,
bpf_rb_root, and bpf_list_head, from Kui-Feng Lee.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (54 commits)
selftests/bpf: Drop useless arguments of do_test in bpf_tcp_ca
selftests/bpf: Use start_test in test_dctcp in bpf_tcp_ca
selftests/bpf: Use start_test in test_dctcp_fallback in bpf_tcp_ca
selftests/bpf: Add start_test helper in bpf_tcp_ca
selftests/bpf: Use connect_to_fd_opts in do_test in bpf_tcp_ca
libbpf: Auto-attach struct_ops BPF maps in BPF skeleton
selftests/bpf: Add btf_field_iter selftests
selftests/bpf: Fix send_signal test with nested CONFIG_PARAVIRT
libbpf: Remove callback-based type/string BTF field visitor helpers
bpftool: Use BTF field iterator in btfgen
libbpf: Make use of BTF field iterator in BTF handling code
libbpf: Make use of BTF field iterator in BPF linker code
libbpf: Add BTF field iterator
selftests/bpf: Ignore .llvm.<hash> suffix in kallsyms_find()
selftests/bpf: Fix bpf_cookie and find_vma in nested VM
selftests/bpf: Test global bpf_list_head arrays.
selftests/bpf: Test global bpf_rb_root arrays and fields in nested struct types.
selftests/bpf: Test kptr arrays and kptrs in nested struct fields.
bpf: limit the number of levels of a nested struct type.
bpf: look into the types of the fields of a struct type recursively.
...
====================
Link: https://lore.kernel.org/r/20240606223146.23020-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.11
The first "new features" pull request for v6.11 with changes both in
stack and in drivers. Nothing out of ordinary, except that we have
two conflicts this time:
net/mac80211/cfg.c
https://lore.kernel.org/all/20240531124415.05b25e7a@canb.auug.org.au
drivers/net/wireless/microchip/wilc1000/netdev.c
https://lore.kernel.org/all/20240603110023.23572803@canb.auug.org.au
Major changes:
cfg80211/mac80211
* parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers
wilc1000
* read MAC address during probe to make it visible to user space
iwlwifi
* bump FW API to 91 for BZ/SC devices
* report 64-bit radiotap timestamp
* enable P2P low latency by default
* handle Transmit Power Envelope (TPE) advertised by AP
* start using guard()
rtlwifi
* RTL8192DU support
ath12k
* remove unsupported tx monitor handling
* channel 2 in 6 GHz band support
* Spatial Multiplexing Power Save (SMPS) in 6 GHz band support
* multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA)
support
* dynamic VLAN support
* add panic handler for resetting the firmware state
ath10k
* add qcom,no-msa-ready-indicator Device Tree property
* LED support for various chipsets
* tag 'wireless-next-2024-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (194 commits)
wifi: ath12k: add hw_link_id in ath12k_pdev
wifi: ath12k: add panic handler
wifi: rtw89: chan: Use swap() in rtw89_swap_sub_entity()
wifi: brcm80211: remove unused structs
wifi: brcm80211: use sizeof(*pointer) instead of sizeof(type)
wifi: ath12k: do not process consecutive RDDM event
dt-bindings: net: wireless: ath11k: Drop "qcom,ipq8074-wcss-pil" from example
wifi: ath12k: fix memory leak in ath12k_dp_rx_peer_frag_setup()
wifi: rtlwifi: handle return value of usb init TX/RX
wifi: rtlwifi: Enable the new rtl8192du driver
wifi: rtlwifi: Add rtl8192du/sw.c
wifi: rtlwifi: Constify rtl_hal_cfg.{ops,usb_interface_cfg} and rtl_priv.cfg
wifi: rtlwifi: Add rtl8192du/dm.{c,h}
wifi: rtlwifi: Add rtl8192du/fw.{c,h} and rtl8192du/led.{c,h}
wifi: rtlwifi: Add rtl8192du/rf.{c,h}
wifi: rtlwifi: Add rtl8192du/trx.{c,h}
wifi: rtlwifi: Add rtl8192du/phy.{c,h}
wifi: rtlwifi: Add rtl8192du/hw.{c,h}
wifi: rtlwifi: Add new members to struct rtl_priv for RTL8192DU
wifi: rtlwifi: Add rtl8192du/table.{c,h}
...
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Link: https://lore.kernel.org/r/20240607093517.41394C2BBFC@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Marek Behún says:
====================
Fix changing DSA conduit
This series fixes an issue in the DSA code related to host interface UC
address installed into port FDB and port conduit address database when
live-changing port conduit.
The first patch refactores/deduplicates the installation/uninstallation
of the interface's MAC address and the second patch fixes the issue.
Cover letter for v1 and v2:
https://patchwork.kernel.org/project/netdevbpf/cover/20240429163627.16031-1-kabel@kernel.org/
https://patchwork.kernel.org/project/netdevbpf/cover/20240502122922.28139-1-kabel@kernel.org/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When changing DSA user interface conduit while the user interface is up,
DSA exhibits different behavior in comparison to when the interface is
down. This different behavior concerns the primary unicast MAC address
stored in the port standalone FDB and in the conduit device UC database.
If we put a switch port down while changing the conduit with
ip link set sw0p0 down
ip link set sw0p0 type dsa conduit conduit1
ip link set sw0p0 up
we delete the address in dsa_user_close() and install the (possibly
different) address in dsa_user_open().
But when changing the conduit on the fly, the old address is not
deleted and the new one is not installed.
Since we explicitly want to support live-changing the conduit, uninstall
the old address before calling dsa_port_assign_conduit() and install the
(possibly different) new address after the call.
Because conduit change might also trigger address change (the user
interface is supposed to inherit the conduit interface MAC address if no
address is defined in hardware (dp->mac is a zero address)), move the
eth_hw_addr_inherit() call from dsa_user_change_conduit() to
dsa_port_change_conduit(), just before installing the new address.
Although this is in theory a flaw in DSA core, it needs not be
backported, since there is currently no DSA driver that can be affected
by this. The only DSA driver that supports changing conduit is felix,
and, as explained by Vladimir Oltean [1]:
There are 2 reasons why with felix the bug does not manifest itself.
First is because both the 'ocelot' and the alternate 'ocelot-8021q'
tagging protocols have the 'promisc_on_conduit = true' flag. So the
unicast address doesn't have to be in the conduit's RX filter -
neither the old or the new conduit.
Second, dsa_user_host_uc_install() theoretically leaves behind host
FDB entries installed towards the wrong (old) CPU port. But in
felix_fdb_add(), we treat any FDB entry requested towards any CPU port
as if it was a multicast FDB entry programmed towards _all_ CPU ports.
For that reason, it is installed towards the port mask of the PGID_CPU
port group ID:
if (dsa_port_is_cpu(dp))
port = PGID_CPU;
Therefore no Fixes tag for this change.
[1] https://lore.kernel.org/netdev/20240507201827.47suw4fwcjrbungy@skbuf/
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The sequence
if (dsa_switch_supports_uc_filtering(ds))
dsa_port_standalone_host_fdb_add(dp, addr, 0);
if (!ether_addr_equal(addr, conduit->dev_addr))
dev_uc_add(conduit, addr);
is executed both in dsa_user_open() and dsa_user_set_mac_addr().
Its reverse is executed both in dsa_user_close() and
dsa_user_set_mac_addr().
Refactor these sequences into new functions dsa_user_host_uc_install()
and dsa_user_host_uc_uninstall().
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jakub Kicinski says:
====================
rtnetlink: move rtnl_lock handling out of af_netlink
With the changes done in commit 5b4b62a169e1 ("rtnetlink: make
the "split" NLM_DONE handling generic") we can also move the
rtnl locking out of af_netlink.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Back in 2007, in commit af65bdfce98d ("[NETLINK]: Switch cb_lock spinlock
to mutex and allow to override it") netlink core was extended to allow
subsystems to replace the dump mutex lock with its own lock.
The mechanism was used by rtnetlink to take rtnl_lock but it isn't
sufficiently flexible for other users. Over the 17 years since
it was added no other user appeared. Since rtnetlink needs conditional
locking now, and doesn't use it either, axe this feature complete.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that we have an intermediate layer of code for handling
rtnl-level netlink dump quirks, we can move the rtnl_lock
taking there.
For dump handlers with RTNL_FLAG_DUMP_SPLIT_NLM_DONE we can
avoid taking rtnl_lock just to generate NLM_DONE, once again.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
kernel.h is included solely for some other existing headers.
Include them directly and get rid of kernel.h.
While at it, sort headers alphabetically for easier maintenance.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Florian Westphal says:
====================
net: tcp: un-pin tw timer
Changes since previous iteration:
- Patch 1: update a comment, I copied Erics v7 RvB tag.
- Patch 2: move bh off/on into hashdance_schedule and get rid of
comment mentioning pinned tw timer.
I did not copy Erics RvB tag over from v7 because of the change.
- Patch 3 is unchanged, so I kept Erics RvB tag.
This is v8 of the series where the tw_timer is un-pinned to get rid of
interferences in isolated CPUs setups.
First patch makes necessary preparations, existing code relies on
TIMER_PINNED to avoid races.
Second patch un-pins the TW timer. Could be folded into the first one,
but it might help wrt. bisection.
Third patch is a minor cleanup to move a helper from .h to the only
remaining compilation unit.
Tested with iperf3 and stress-ng socket mode.
====================
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Its no longer used outside inet_timewait_sock.c, so move it there.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After previous patch, even if timer fires immediately on another CPU,
context that schedules the timer now holds the ehash spinlock, so timer
cannot reap tw socket until ehash lock is released.
BH disable is moved into hashdance_schedule.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The TCP timewait timer is proving to be problematic for setups where
scheduler CPU isolation is achieved at runtime via cpusets (as opposed to
statically via isolcpus=domains).
What happens there is a CPU goes through tcp_time_wait(), arming the
time_wait timer, then gets isolated. TCP_TIMEWAIT_LEN later, the timer
fires, causing interference for the now-isolated CPU. This is conceptually
similar to the issue described in commit e02b93124855 ("workqueue: Unbind
kworkers before sending them to exit()")
Move inet_twsk_schedule() to within inet_twsk_hashdance(), with the ehash
lock held. Expand the lock's critical section from inet_twsk_kill() to
inet_twsk_deschedule_put(), serializing the scheduling vs descheduling of
the timer. IOW, this prevents the following race:
tcp_time_wait()
inet_twsk_hashdance()
inet_twsk_deschedule_put()
del_timer_sync()
inet_twsk_schedule()
Thanks to Paolo Abeni for suggesting to leverage the ehash lock.
This also restores a comment from commit ec94c2696f0b ("tcp/dccp: avoid
one atomic operation for timewait hashdance") as inet_twsk_hashdance() had
a "Step 1" and "Step 3" comment, but the "Step 2" had gone missing.
inet_twsk_deschedule_put() now acquires the ehash spinlock to synchronize
with inet_twsk_hashdance_schedule().
To ease possible regression search, actual un-pin is done in next patch.
Link: https://lore.kernel.org/all/ZPhpfMjSiHVjQkTk@localhost.localdomain/
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Petr Machata says:
====================
mlxsw: ACL fixes
Ido Schimmel writes:
Patches #1-#3 fix various spelling mistakes I noticed while working on
the code base.
Patch #4 fixes a general protection fault by bailing out when the error
occurs and warning.
Patch #5 fixes the warning.
Patch #6 fixes ACL scale regression and firmware errors.
See the commit messages for more info.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ACLs that reside in the algorithmic TCAM (A-TCAM) in Spectrum-2 and
newer ASICs can share the same mask if their masks only differ in up to
8 consecutive bits. For example, consider the following filters:
# tc filter add dev swp1 ingress pref 1 proto ip flower dst_ip 192.0.2.0/24 action drop
# tc filter add dev swp1 ingress pref 1 proto ip flower dst_ip 198.51.100.128/25 action drop
The second filter can use the same mask as the first (dst_ip/24) with a
delta of 1 bit.
However, the above only works because the two filters have different
values in the common unmasked part (dst_ip/24). When entries have the
same value in the common unmasked part they create undesired collisions
in the device since many entries now have the same key. This leads to
firmware errors such as [1] and to a reduced scale.
Fix by adjusting the hash table key to only include the value in the
common unmasked part. That is, without including the delta bits. That
way the driver will detect the collision during filter insertion and
spill the filter into the circuit TCAM (C-TCAM).
Add a test case that fails without the fix and adjust existing cases
that check C-TCAM spillage according to the above limitation.
[1]
mlxsw_spectrum2 0000:06:00.0: EMAD reg access failed (tid=3379b18a00003394,reg_id=3027(ptce3),type=write,status=8(resource not available))
Fixes: c22291f7cf45 ("mlxsw: spectrum: acl: Implement delta for ERP")
Reported-by: Alexander Zubkov <green@qrator.net>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Tested-by: Alexander Zubkov <green@qrator.net>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ACLs in Spectrum-2 and newer ASICs can reside in the algorithmic TCAM
(A-TCAM) or in the ordinary circuit TCAM (C-TCAM). The former can
contain more ACLs (i.e., tc filters), but the number of masks in each
region (i.e., tc chain) is limited.
In order to mitigate the effects of the above limitation, the device
allows filters to share a single mask if their masks only differ in up
to 8 consecutive bits. For example, dst_ip/25 can be represented using
dst_ip/24 with a delta of 1 bit. The C-TCAM does not have a limit on the
number of masks being used (and therefore does not support mask
aggregation), but can contain a limited number of filters.
The driver uses the "objagg" library to perform the mask aggregation by
passing it objects that consist of the filter's mask and whether the
filter is to be inserted into the A-TCAM or the C-TCAM since filters in
different TCAMs cannot share a mask.
The set of created objects is dependent on the insertion order of the
filters and is not necessarily optimal. Therefore, the driver will
periodically ask the library to compute a more optimal set ("hints") by
looking at all the existing objects.
When the library asks the driver whether two objects can be aggregated
the driver only compares the provided masks and ignores the A-TCAM /
C-TCAM indication. This is the right thing to do since the goal is to
move as many filters as possible to the A-TCAM. The driver also forbids
two identical masks from being aggregated since this can only happen if
one was intentionally put in the C-TCAM to avoid a conflict in the
A-TCAM.
The above can result in the following set of hints:
H1: {mask X, A-TCAM} -> H2: {mask Y, A-TCAM} // X is Y + delta
H3: {mask Y, C-TCAM} -> H4: {mask Z, A-TCAM} // Y is Z + delta
After getting the hints from the library the driver will start migrating
filters from one region to another while consulting the computed hints
and instructing the device to perform a lookup in both regions during
the transition.
Assuming a filter with mask X is being migrated into the A-TCAM in the
new region, the hints lookup will return H1. Since H2 is the parent of
H1, the library will try to find the object associated with it and
create it if necessary in which case another hints lookup (recursive)
will be performed. This hints lookup for {mask Y, A-TCAM} will either
return H2 or H3 since the driver passes the library an object comparison
function that ignores the A-TCAM / C-TCAM indication.
This can eventually lead to nested objects which are not supported by
the library [1].
Fix by removing the object comparison function from both the driver and
the library as the driver was the only user. That way the lookup will
only return exact matches.
I do not have a reliable reproducer that can reproduce the issue in a
timely manner, but before the fix the issue would reproduce in several
minutes and with the fix it does not reproduce in over an hour.
Note that the current usefulness of the hints is limited because they
include the C-TCAM indication and represent aggregation that cannot
actually happen. This will be addressed in net-next.
[1]
WARNING: CPU: 0 PID: 153 at lib/objagg.c:170 objagg_obj_parent_assign+0xb5/0xd0
Modules linked in:
CPU: 0 PID: 153 Comm: kworker/0:18 Not tainted 6.9.0-rc6-custom-g70fbc2c1c38b #42
Hardware name: Mellanox Technologies Ltd. MSN3700C/VMOD0008, BIOS 5.11 10/10/2018
Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work
RIP: 0010:objagg_obj_parent_assign+0xb5/0xd0
[...]
Call Trace:
<TASK>
__objagg_obj_get+0x2bb/0x580
objagg_obj_get+0xe/0x80
mlxsw_sp_acl_erp_mask_get+0xb5/0xf0
mlxsw_sp_acl_atcam_entry_add+0xe8/0x3c0
mlxsw_sp_acl_tcam_entry_create+0x5e/0xa0
mlxsw_sp_acl_tcam_vchunk_migrate_one+0x16b/0x270
mlxsw_sp_acl_tcam_vregion_rehash_work+0xbe/0x510
process_one_work+0x151/0x370
Fixes: 9069a3817d82 ("lib: objagg: implement optimization hints assembly and use hints for object creation")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Tested-by: Alexander Zubkov <green@qrator.net>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The library supports aggregation of objects into other objects only if
the parent object does not have a parent itself. That is, nesting is not
supported.
Aggregation happens in two cases: Without and with hints, where hints
are a pre-computed recommendation on how to aggregate the provided
objects.
Nesting is not possible in the first case due to a check that prevents
it, but in the second case there is no check because the assumption is
that nesting cannot happen when creating objects based on hints. The
violation of this assumption leads to various warnings and eventually to
a general protection fault [1].
Before fixing the root cause, error out when nesting happens and warn.
[1]
general protection fault, probably for non-canonical address 0xdead000000000d90: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 1083 Comm: kworker/1:9 Tainted: G W 6.9.0-rc6-custom-gd9b4f1cca7fb #7
Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019
Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work
RIP: 0010:mlxsw_sp_acl_erp_bf_insert+0x25/0x80
[...]
Call Trace:
<TASK>
mlxsw_sp_acl_atcam_entry_add+0x256/0x3c0
mlxsw_sp_acl_tcam_entry_create+0x5e/0xa0
mlxsw_sp_acl_tcam_vchunk_migrate_one+0x16b/0x270
mlxsw_sp_acl_tcam_vregion_rehash_work+0xbe/0x510
process_one_work+0x151/0x370
worker_thread+0x2cb/0x3e0
kthread+0xd0/0x100
ret_from_fork+0x34/0x50
ret_from_fork_asm+0x1a/0x30
</TASK>
Fixes: 9069a3817d82 ("lib: objagg: implement optimization hints assembly and use hints for object creation")
Reported-by: Alexander Zubkov <green@qrator.net>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Tested-by: Alexander Zubkov <green@qrator.net>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The key is encoded, not encrypted.
Fixes: c22291f7cf45 ("mlxsw: spectrum: acl: Implement delta for ERP")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Tested-by: Alexander Zubkov <green@qrator.net>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fixes: 0a020d416d0a ("lib: introduce initial implementation of object aggregation manager")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Tested-by: Alexander Zubkov <green@qrator.net>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fixes: 0a020d416d0a ("lib: introduce initial implementation of object aggregation manager")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Tested-by: Alexander Zubkov <green@qrator.net>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently the k3_udma_glue_rx_get_irq() function returns either negative
error codes or zero on error. Generally, in the kernel, zero means
success so this be confusing and has caused bugs in the past. Also the
"tx" version of this function only returns negative error codes. Let's
clean this "rx" function so both functions match.
This patch has no effect on runtime.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Dan, who's working on C++ YNL, pointed out that the C code
does not make policies const. Sprinkle some 'const's around.
Reported-by: Dan Melnic <dmm@meta.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Having an OR in WARN_ON() makes me sad because it's impossible to tell
which condition is true when triggered.
Split a WARN_ON() with an OR in page_pool_disable_direct_recycling().
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
